Flowers made of corrugated paper step by step instructions. Large flower for the interior. Bell - learning to make large paper flowers for home decoration

You always want to decorate the most significant day in some special way. Ready-made decorations are quite expensive, and if you decorate a large room with them, it will cost a pretty penny. Today, there are quite a large number of handicraft methods. Flowers can be made using quilling, beading, cold porcelain and even wool felting. But all these options are labor-intensive and require certain technical skills. You can make original flowers from corrugated paper with your own hands in literally 30 minutes. It always looks fresh and creative, plus you can add easy recycling.

Such jewelry has several important advantages that make it a leader:

• minimum amount of money spent on necessary materials;
• flowers can be made so realistic that they are almost impossible to distinguish from real ones;
• the material can be purchased at almost any stationery or craft store;
• extraordinary beauty can be achieved without specialized tools and complex circuits;
• quick disposal is especially important when decorating large halls or rooms;
• will be an excellent gift or decorative element for any celebration;
• This type of decoration can be made even by a child.

Even with all the abundance of DIY methods, flowers made of corrugated paper have been and will be at the peak of popularity. A wonderful way to express yourself and realize your wildest fantasies.

Preparatory work

Before you begin the mystery of flower production, you must first of all equip yourself with all the necessary arsenal in advance. Corrugated paper is best purchased in rolls rather than sheets. The roll contains a large enough footage, which is enough for a whole heap of buds, flowers and petals.

It is recommended to select paper in more natural shades, unless, of course, as planned, the final work should look natural and natural. For buds, leaves and stems, you should take several flowers, in this case, you can play with the shadows. Then the flowers will look more “alive”.

For the stem you need to take a thin pliable wire, a floral sleeve or any other materials.

You will also need thick cardboard for cutting out blanks, glue and sharp scissors. Not necessary, but you can prepare fishing line or strong silk threads and a breadboard knife.

It is best to work in good lighting, this can be either natural light or fluorescent lamps.

Important! If there are small children or animals in the house, it will be safer to work on a high table rather than on the floor.

Flower making process

At the initial stage, many needlewomen are faced with the question: how to make flowers from corrugated paper and where, in fact, you need to start. Of course, each craftswoman has already developed her own technology and some little secrets. However, nothing is impossible for those who want to reach the heights of professionalism.

The most complex technologies always come down to the simplest steps:

First, you need to draw the necessary templates on cardboard. For a more realistic flower, you should prepare several templates of different sizes and slightly different shapes.

The more paper petal blanks there are, the better. In this case, we can recall the beautiful rose flower, which consists of a huge variety of petals of various sizes.

After the cardboard blanks are ready, you can start cutting them out of paper.

Once all the petals are prepared, you can begin creating the flower itself. To do this, you will need to take 5-7 of the smallest petals and tie them tightly at the bottom. This way a tight bud is formed. For strength, you can glue the bottom part with glue.

After the bud is ready, you should carefully attach each petal separately, slightly stretching the upper edges. By performing these actions, the petal is given a natural wavy shape.

After all the petals have been collected into a finished flower, it can be safely “planted” on the stem.

The stem, like the flower, should look natural. This can easily be achieved with regular wire and green paper. It is necessary to measure the required piece of wire or floral sleeve and decorate it with prepared corrugated paper, fabric, or even paint it with acrylic paints. Then attach leaves and thorns if the flower implies their presence. The finished flower is “settled” on the stem using glue. Since the wire and the floral sleeve are movable, they can be given absolutely any shape and bend.

How to make realistic peonies.Bystep by step instructions

Peony is a magical flower that is traditionally a symbol of purity and love. A cute bouquet can be an excellent gift for a wedding or birthday of a beloved friend. Peony flowers in nature are quite large in size. For a bouquet of flowers you don’t need to make a large number of heads; 7 pieces will be enough.

If you want to achieve a shade close to the natural color, you can take snow-white or milky paper and give a few strokes of pink, orange or peach acrylic. You can make delicate peony flowers from corrugated paper with your own hands in just 20-30 minutes.

At the first stage, you should carefully cut out rectangles according to the template and slightly round them, thereby giving a natural roundness to the petal.

To make one peony you will need to prepare 10 strips for small petals, 10 strips of wider paper for large petals and several strips of different sizes of green paper for making leaves. To give a realistic shape to the peony, you need to cut the petals slightly oval with a small stem, and the leaves slightly pointed towards the top.

peonies - process

After all the shapes are cut out, with careful movements the petals need to be slightly stretched in width and height, until the petal is visually closer to the natural one. Next, give the petal a convexity on the outside, thus giving it some volume.

Important! When stretching petals or leaves, you must avoid using nails, otherwise the tenderness and fragility will be spoiled by unwanted lines.

Then the process of “folding” the bud begins. To do this, take several of the smallest petals and wrap one tightly in the other. When wrapping, you must ensure that each subsequent layer overlaps the seam of the previous layer. Thus, gradually, the petals are stacked on top of each other in layers. When the flower has been collected, its base should be secured with thread, fishing line or glue. Since a peony is a carelessly disheveled flower, you can safely tear some of the petals of the finished product slightly and then stretch the edges again.

In total, it will take about 25 petals to make one peony. Sepals are made from green paper. It is necessary to prepare about 10 green leaves, after shaping, wrap them around the finished peony.

To make the flower more voluminous and lush, at the initial stage a round candy or a formed foil ball is placed in the core.

It should be remembered that natural flowers in nature do not have perfectly smooth edges and lines, so the less neatness there is in the bud, the better.

Master classfor making delicate lilies

The royal lily flower is sensuality combined with majesty. Volumetric flowers made of corrugated paper always attract attention. This is not only a good addition to the main gift, but also a great decorative element for any holiday or event.

Using the example below, we will describe step by step how you can make a wonderful lily from ordinary corrugated paper.

To work you will need:

• paper in light lilac, yellow and green shades;
• watercolor, gouache or acrylic paints;
• glue or glue gun;
• wire for the stem, approximately 30 cm;
• brush and sharp scissors.

If the paper is on a roll, then you need to cut a strip 7 centimeters wide from it. From the resulting piece, cut into small rectangular pieces, which should be given a rounded shape to the lily petals. Then, the edges need to be stretched a little with your fingertips, for greater naturalness, and slightly curled with scissors or a regular pencil. Make a depression in the middle of the petal, thus giving it a natural roundness.

When the petals are completely ready, the magical process of transformation begins. To do this, you need to mix brown and dark lilac colors and use the resulting tone to draw natural dots at the base of the petal. For greater naturalness, the dots should be thicker at the base and almost disappear towards the middle.

The stem is made from wire. The required piece of wire is cut and decorated with a thin strip of green corrugated paper. Before wrapping paper around the wire, it is recommended to stretch it properly. This is done to ensure that all unnecessary stripes and folds disappear.

At any edge of the finished stem we make a pistil and form a stigma using hot glue. To be convincing, you should paint this place with green paint.

The stamens are made from yellow paper. A small even square is cut from the roll. We cut strips along its entire length, but leave the base solid. Then you need to twist each strip with twisting movements and treat the tip with a drop of hot glue. After all the work is done, dip the prepared stigmas in semolina, paint with acrylic or gouache in a brown-chocolate shade and let dry.

Lily leaves have a rather elongated shape. You need to cut long rectangular strips of green crepe paper, slightly stretching and folding them. We glue the stamens to the pistil and add three lily petals to the finished structure, placing them slightly above the tips of the anthers.

After this, glue three more petals over the joints of the previous petals and twist the edges of the finished flower again.

The final stage is “installing” the finished lily on the stem, adding petals and securing with drops of glue.

Corrugated flowers with candies

Every needlewoman, having reached a certain level, wants to do something extraordinary and memorable. Not a single holiday or special event is complete without sweets and flowers. Modern craftswomen have decided to combine these two components into one and call this direction suite design.

Flowers made of corrugated paper with candies came into fashion not so long ago, but they have already managed to win over quite a large number of the public with their originality and creativity. Today, through your PC, you can view photos and videos of a huge number of master classes on making an unusual bouquet. A detailed step-by-step description will help you turn all your bold ideas into reality. The main thing is not to be afraid to experiment. Only in this case will you get bouquets that are worthy of decorating not only birthdays, but also weddings.

To make a bouquet you will need chocolates, preferably round and wrapped. This will greatly facilitate the task during the formation of a flower bud. You can take paper of absolutely any color, here you can give free rein to your fantasies. Squares should be cut out of the corrugation, rounded and petals formed by pulling and stretching the finished fabric.

The next step is to cut out squares of baking film. The candy is wrapped around the finished square and a small tail is left at the bottom, which is then wrapped with a beautiful thread or gold-colored ribbon. We gradually “wrap” the finished workpiece, layer by layer, with petals, immediately giving it the shape of a natural flower. You must try to ensure that the first layers completely cover the candy, but the subsequent ones may already be half-open.

A chic bouquet is carefully formed from ready-made flowers. This is done in different ways. You can “plant” each flower separately on a pre-prepared wire; you can use skewers, a foam ball, a plastic bottle or polyurethane foam. After the bouquet has been completed, it can be decorated with satin ribbons, various laces, beads, stones or rhinestones. Such an original gift will definitely leave behind indelible pleasant memories.

To create a spectacular bouquet, you don’t have to stop at just one type of flower. These can be a wide variety of combinations of daisies, roses, daffodils, poppies, tulips, orchids and so on.

Giant size flowers

You can make large flowers from corrugated paper with your own hands for any occasion. Such decoration will always look festive and unusual. Flowers of a delicate shade can decorate a romantic party or wedding celebration. Huge, but at the same time fragile, as if made of porcelain, can add even more atmosphere to the holiday.

For a children's birthday party, products in bright and flashy colors are suitable. Not only will they become indispensable for decorating the festive photo zone, but also photo sessions. Magnificent life-size flowers made of corrugated paper will be able to “greet” guests at the entrance. With such a huge bouquet, you can properly greet your beloved wife from the maternity hospital or give it to your girlfriend.

Step-by-step process for making a large rose:

• on thick cardboard, draw a petal template in the shape of a heart and a drop;
• cut out 15 large hearts and 5 petals in the form of droplets from paper according to the template;
• each cut petal should be well stretched up and to the sides, giving it a natural and natural shape;
• for droplet-shaped petals, you need to beautifully wrap the edges using a pen or pencil;
• For the heart-shaped petals, we make wavy bends using a pencil only on the sides;
• for the stem you will need a piece of ordinary soft wire, which must be decorated with floral tape or green corrugated paper;
• the formation of a bud should begin with small petals, after gluing them to the stem with a drop of glue;
• after the base is formed, first the droplets and then the hearts are glued to it one by one;
• from a long strip of green paper, a sepal is cut into small cloves;
• The finished sepal is fixed around the base of the bud, secured with green adhesive tape or a drop of glue.

At this stage, the rose is completely ready. In order to make leaves, cut out oblong shapes from green corrugated paper. After this, place the edge of the decorated wire in the middle of the finished sheet, after moistening it with glue. Then fold both halves of the sheet so that the wire remains hidden inside the petal, and bend the remaining edges of the paper back.

At the final stage, the leaves are attached to the stem with adhesive tape and decorated with corrugated paper or a few strokes of acrylic paint.

Giant flowers made of corrugated paper can magically turn the most ordinary holiday into an enchanting celebration.

Materials:

• corrugated paper of the desired color;

• glue (PVA or glue stick).

Manufacturing

1. First you need to prepare the flower details from corrugated paper. To do this, draw a circle of the desired size on cardboard (this will be the base of the flower) and cut it out with scissors. Then take the corrugated paper and place it in front of you so that the stripes are vertical. Cut out the petals of the future flower.

You will need 12 large petals, 6 medium and 10 small. Process the edges and shape of the petals as shown in the photo. To decorate the center of the flower, cut out a slightly rounded strip of corrugated paper and often cut with scissors not all the way through, and also roll a small ball from a small piece of paper.

2. Now you can get to work. Stretch the petals a little (carefully so as not to tear). Apply a layer of glue to the edges of the cardboard circle. Evenly distribute 5 large petals around the circumference and glue. Then glue the petals in the same way in the next 2 rows (4 and 3 petals, respectively).

3. Glue the medium and small petals in the same way. Please note that the closer to the center the petals are located and the smaller their size, the fluffier their edges.

4. Decorate the center of the flower from corrugated paper. To do this, fold the cut strip of paper in half and drop glue onto one end. Then place a ball of paper there and start wrapping the strip around it. Secure the end with glue, and then glue the entire bud to the center of the flower.

Using a similar technique, you can make other flowers from corrugated paper, differing in the shape of the petals and size - for example, dahlias or roses. This flower can be glued to a gift box using double-sided tape.

Delicate bouquet: flowers made of corrugated paper

Prepare the following materials:

wooden skewers;

corrugated paper of 3 colors (yellow for stamens, green for leaves and a suitable color for petals);

glue stick;

Manufacturing

1. Take yellow paper and cut out a rectangle with sides of approximately 8 and 15 cm. Then cut the rectangle along the long side about 2/3 in several places. In total you should have 8-9 strips. Now twist the uncut part and gently roll the strips with your fingers to form thin stamens.

2. Attach the resulting bunch of stamens to the petal paper and determine the approximate size of the petals based on the length of the stamens. Cut out rounded oblong petals (5-6 pieces).

3. Stretch the petals a little so that they take on a more natural shape. Then use a glue stick to glue them to the base of the stamens, wrapping them around one after another.

4. Now you need to make a flower stem from corrugated paper. To do this, take a wooden skewer and insert it into the base of the bud. Wrap the bottom edges of the flower tightly around the skewer. Cut a thin ribbon strip from green paper and tightly wrap a skewer greased with glue from the base to the very end.

5. Cut out leaves from the same green paper and glue them to the stem in random order.

Make several of these flowers from crepe paper. You can use different colors and shapes of petals. Collect the resulting flowers into a bouquet and place in a vase.

Sweet bouquets

A sweet bouquet is a wonderful gift for any occasion, be it a wedding, Valentine's Day, March 8 or a birthday. And here corrugated paper will come to your aid.

Materials:

round candies (for example, Ferrero Rocher);

transparent film (or gold foil);

corrugated paper (red, pink, yellow and beige);

• gold threads.

Manufacturing

1. We will make 2 flowers at once. To make them, cut out 2 rectangles from yellow and beige corrugated paper with a long side slightly larger than the circumference of the candy.

2. Fold the rectangles like an accordion 5 times and iron the folds with scissors.

3. Trim the top of the accordions until they are round.

4. Straighten the rectangles and stretch the petals a little so that they look natural.

5. Cut the petals 2/3 of the way.

6. Using a toothpick, “perm” one set of petals of each color.

7. Cut out a square from transparent film or gold foil, wrap the candy in it and secure with gold threads.

8. Wrap flower petals from crepe paper around the candies. Those petals that are curled more tightly should be in the center, those that you stretched just a little should be at the edges.

9. Slightly straighten the outer row of petals.

Use 3 or more rows of petals - such flowers will look more lush.

Having made many of these sweet flowers from corrugated paper, make a large one out of them, additionally decorating it with organza, beads, ribbons and other decorative elements.

Using the same technique, you can make bouquets of flowers of slightly different shapes. Detailed photo instructions are presented below.

Today I would like to show you the idea of ​​​​using large flowers in interiors; such decorations are also called life-size, meaning that their size matches the height of a person. Of course, it is not necessary to make giant roses, but to decorate a large room, small buds will not look as impressive as giants.

This design can liven up the space above a bed, sofa or an ordinary corner. It is also often made for significant events - Birthdays, Valentine's Day or March 8th.

Let's start getting acquainted with this beauty and figure out how to make several popular types of flowers yourself.

We have long known the idea of ​​decorating with volumetric elements; most often shelves perform this function, but sometimes you really want romance and new elements.

More often, a place is allocated in the hall where there is no unnecessary furniture, a composition of buds and leaves is created and guests are invited. After all, you already have a photo zone ready at home. Believe me, smart guests will appreciate your idea.

But in any decor there is always an idea. For example, using monochrome shades of paper, choose different color depths and textures. And if you want to create a stylish composition, then I advise you to look at it and then decide on the color.

Compositions with buds of different sizes look beautiful. This is how completeness appears in the decoration.

Now let's get started on how to make large paper flowers. I suggest starting with such a bright and rainbow composition - a ball, which can easily be hung on the dining table in the living room or in the corner of the hall.

I suggest using double-sided A4 size paper for the flowers. Also make several buds from velvet colored sheets, this will give more realism.

To form a circle, take a large object, you can use a flat dessert plate.

It is more convenient to bend the petals with scissors, just do not press too hard, otherwise you will tear the paper.

And now flowers on a stem are very popular. They are simply huge! The leg is formed by a coil of wire, but I know that some craftsmen have adapted to making it from PVC pipes.

A large composition of buds of different types of flowers will be an alternative to watches or paintings. It’s not yet a very popular phenomenon to decorate walls with such a bouquet, but it looks simply stunning and delicate in the spring.

Another example of home decor, when the screen is decorated with roses of the same shade. Here you can take a selfie and simply isolate yourself from the outside world and dream.

Every craftswoman makes each type of flower in her own way. For example, peonies can be made very simply using thin corrugated paper, as shown in the master class.

And also make an interior rose that looks beautiful in floor vases.

I gave an example of small sizes; the larger the flower you need, the larger the number you multiply each of these values. The main thing is that there is enough paper)))

The entire strip of paper needs to be folded like an accordion, a template attached and cut out. Before cutting, check which part stretches better and place the template so that the stretching side is horizontal to it.

Important! Do not unbutton the bottom folds!

Unfold and admire the resulting garland.

Take a stick or thick wire. Grease the bottom edge of our resulting garland with glue and begin wrapping the paper around the wire.

As shown in the photo.

The bottom needs to be firmly fixed so that the wire does not fall out of the bud and the petals themselves do not unfurl. The edge can also be coated with glue.

I also thought that it would be more convenient for many to simply print out ready-made petal patterns and start creating, so I present three templates for parts of different shapes.

Maybe you will like this type of petals better.

Or you want to try using such an ornament.

Of course, it takes a lot of time to create huge compositions, but this will serve as an unusual replacement for boring balloons and posters.

Giant peony made of corrugated or crepe paper on the wall

Peonies, like roses, are popular. I think this is the king of all flowers because it looks elegant and smells amazing. Craftswomen have different approaches to creating it, but the effect is always beyond praise. I think that not everyone will be able to create such a flower right away, so I put together a short video that tells in great detail how to roll the simplest peony.

It really is done very quickly, and looks no worse than those created using other techniques. I invite you to watch.

I also liked the idea of ​​the foundation used in this video. after all, such a flat circle will attach perfectly to the wall even with double-sided tape.

How to make voluminous paper flowers for beginners?

Those who create giant buds undergo many paid and free master classes, constantly improving their skills. But not everyone immediately becomes a professional; everyone started somewhere. I want to give you step-by-step master classes, where the photo very clearly describes the progress of the work.

For example, the idea to create such a rose. No, it's not difficult, it just requires a lot of material.

We take a roll of paper, you can use designer sheets, but for beginners it is better to take a corrugated roll. It is easier to work with, it takes different shapes well, and the color range of this paper is very diverse.

The cut leaf is in the shape of a drop, stretch it across the width, so the leaf will curl up a little and take on a concave shape.

If you want to make an unopened bud, then take fewer parts; for a blossomed one, you will need more of them.

Make asters from simple colored A4 sheets. This is one of the simplest flower options. Each petal will need to be rolled inward, but if on the contrary you want to turn them out, then use scissors. Running them along the outer edge.

For this aster you need to use layers of petals of different diameters. The top one is the smallest. I would remove about 8mm from each subsequent row.

I present another master class on creating a flower arrangement - a ball. Depending on the selected diameter of each template, the size of the ball will depend. If you want to use it for assembly halls, for a wedding or birthday, then feel free to take the diameter of the plate.

I found the idea of ​​creating fluffy flowers out of toilet paper interesting. This material is easy to work with because it is soft and easy to cut and roll. Modern toilet paper now comes in a variety of colors - from white to blue. Can you imagine what composition you can create?

You need to fold the strip in half and start making a cut towards the middle of the strip. Do not cut to the edge, leave at least two centimeters.

Now begin to roll this blank into a spiral, periodically gluing the spreads so that the flower does not fall apart.

Of course, there are so many ideas for creating these giants that I offer you one more video to watch. I really liked the simplicity and elegance of these crafts.

To make these decorations more like the real thing, look for paper with a gradient, where the sheet has a smooth transition from light to dark. The dark one is usually used at the bottom of the petal, because there is shadow there, and the lighter side goes to the top.

How are large paper flowers used for home decor or photo zone?

Oh, every fashionista dreams of capturing herself next to such a tender photo zone. Giants are used for photo shoots at weddings, anniversaries and other important events. After all, it is important to create a beautiful background. By the way, this composition is also popular for magazines and even clothing collections. I think that such paper florists are in high demand.

See how one of the online stores brought their stand to life. Gentle, original and very feminine, isn’t it? Maybe you have your own business, then this idea can be adopted to create an image.

And our compositions look so easy in the interior of an ordinary apartment. Very unusual and bright.

An unusual idea of ​​using origami techniques to create giants. Look how fabulous it is. The girl seems like just a fairy or an inch against their background.

When you don’t have much time, you can create such fantasy flowers in the shape of the sun yourself. Use a regular landscape sheet for small fragments, and sheets of whatman paper for large ones.

You can make this decor as follows. Fold the sheet lengthwise into an accordion, tie the middle and unfold each side. Glue the edges of one side to the edge of the other.

Cover the center nicely with a paper circle.

Paper dandelions captivated me. By the way, the top of the inflorescences can also be made using toilet paper, as I described above.

Decor idea for a children's party.

See how you can combine several types of petals. Light and pastel colors almost all combine with each other. The main thing is to take all the tones of the same saturation so that a single whole is created, and not so that one bright element attracts all the attention.

Make an imitation of wisteria. It comes in such different shades that you can choose almost any color, but I would prefer pink and lilac tones. They are more natural and natural.

Try to choose paper of the same tone but of different saturations, from dark to lighter.

First we need to make the blanks. To make it faster, fold the strip of paper several times.

Cut out the drop.

Wrap the base of the workpiece.

Now bend this tail inward. To make it stick better, you can fix it with glue.

This is what we got. You need at least 20 blanks of each shade.

We string the workpieces onto a strong thread at the base, wrapping each subsequent one in the other direction.

Now these petal threads can be tied to the base you decide to use. If you have a suspension, as in the photo above, then for the base, select a hoop of the required diameter.

Master class on making a large decoration

Let's take a closer look at how to make these rainbow huge asters. To create them, you can choose corrugated or crepe paper. The main thing is to choose the right shade. The entire roll will be used.

Let's roll the paper into an accordion.

Paper clips and clamps will help you hold all the workpieces in the desired position.

Now we give each strip the desired size, remove two centimeters from each subsequent workpiece.

We shape the petals on all rolls.

Now we unroll the rolls and form layers, laying the blanks on top of each other from largest to smallest.

To avoid confusion, you can write its length on each roll.

We fold it like an accordion and fix it in the middle.

We begin to straighten each layer.

This is how easy it is to make your own decor. The main thing is to be patient and have plenty of available material.

Corrugated paper anemones

Anemones are also often used for decoration. They are incredibly beautiful and realistic.

I would like to show you another video that gives detailed instructions on how to make them. You don’t have to make decor of incredible sizes right away, start with ordinary ones in order to understand the essence of the process and get better at it, and you will also save on materials, because every small bud can then be reproduced in large sizes.

I really wanted you to get acquainted with this idea of ​​​​decorating and decorating walls and other surfaces. Bookmark this article to quickly find it when you need to decorate your room for the holidays.

A bright beautiful bouquet will be a wonderful gift. Festive tables are decorated with floral arrangements. They are used to decorate various events. Such products can be made with your own hands. They will not wither over time and will delight others with their impeccable appearance for a long time.

To create an interesting composition, consider a photo of flowers made of corrugated paper. Experienced craftswomen offer different options for the manufacture and arrangement of plant elements.

The structure of corrugated paper allows you to create three-dimensional compositions. The material holds its shape well and is suitable for decorating bouquets. It will take very little time to create your own unique flower.

Materials and tools

To begin the creative process, purchase corrugated paper. It is inexpensive and easy to purchase in a store. Corrugated material is produced in a wide range of colors.

You can buy single-color options or rolls with a soft transition of shades. They open up almost unlimited possibilities for bringing interesting ideas into reality.

To make flowers you need the following materials:

• corrugated paper;
• cardboard;
• wire;
• glue;
• cotton wool;
• paper clips;
• threads

If you plan to make bouquets with sweets, then purchase sweets in advance, which will become an important component of the product.

To work you will need the following tools:

• scissors;
• a simple pencil;
• pliers;
• silicone gun.

To produce beautiful flowers, live plants are carefully observed. Each has its own structural features, which are taken into account during manufacturing. To get large flowers from corrugated paper, increase the standard pattern to the desired size.

The technology for performing the work is no different from the usual procedure for making flowers. But for a bouquet of large plants you will need more materials. They will become a magnificent interior decoration for a celebration.

Corrugated paper rose

The Queen of Flowers always looks great in a single copy and in bouquets. This delicate flower is easy to make yourself.

Step-by-step instruction:

• Petals and leaves are drawn on cardboard. To do this, you can use ready-made patterns or remove them from a real rose.
• Small indentations are made in the petal blanks with your fingers to give the elements the desired shape.
• The length of the leg is chosen at the request of the craftswoman; for this, the wire is carefully cut off with pliers.
• Prepare small pieces of wire of smaller diameter on which the green leaves will be attached.
• The end of the wire is bent with pliers to form a bud. For this, cotton wool is used, or the middle of the flower is simply wrapped in paper.
• One by one, they begin to glue the petals to the core, starting with the smallest part. To securely fasten the elements, a strong matching thread is used.
• The flower is ready. Now you need to take a small strip of corrugated paper. It is wound around the stem, on which pre-prepared leaves are attached. This is the final stage of assembly.
• Petals and leaves are carefully straightened.

If you make several flowers, they are collected into a bouquet. There is an easier way to make a rose. It only takes 15 minutes for one flower.

A strip 10 cm wide is cut out of long paper. The edge of the workpiece is made uneven by pinching it with your fingers along the entire length. After this operation, the strip is folded into a bud, which is attached to the wire with a thread. You can create an amazing composition in just 1 hour.

Beginning craftswomen are concerned with the question of how to make flowers from corrugated paper. To do this, you need to prepare materials and tools, be patient and get to work. If you follow the instructions exactly, you can get excellent results.

Corrugated paper peony

For a luxurious peony you will need paper of different shades. A strip is cut from each roll. The size of the element depends on its distance from the core. The dark color is located closer to the center, after which there is a transition to lighter shades. The resulting elements are folded like an accordion; they should all have the same width.

The edge of each component is shaped into a petal. The middle parts of the resulting blanks are connected and laid according to size. All components are rewound with thread and a flower is formed.

Corrugated paper tulips

Take a template and cut out the petals. The tip of each of them is curled and the base is shaped into a cup. Then they begin to form a bud; glue is used to perform this operation.

The elements are wound alternately to the core. After this operation, a strip of green paper is wrapped around the stem. The cut leaves are attached to the stem.

Corrugated paper flowers with candies

A rectangle is cut out of paper, folded in half, and the edges are cut off on one side with scissors. Candy is placed in such a blank. The material in the center is slightly stretched by hand. On one side, the edge is fixed with an elastic band. Wire is used as a stem and is attached to the base of the flower. To do this, you can use a silicone gun.

Cut out the petals. They need to be shaped by stretching the middle and twisting the edges of the workpiece. For a lush flower, more petals are cut out. They are attached to the bud with threads and glue. This fixation ensures a reliable connection of all components. You can also use rubber bands for this.

Leaves are cut out of green paper and attached to the base. The stem is wrapped in green paper. A bouquet of flowers will be a great holiday gift. Small bows will give the composition a festive look; they are attached with skewers. Such a surprise will definitely be appreciated.

It’s not difficult to find ready-made stencils; you can make them yourself. Don't worry if the elements turn out different. In nature, no two leaves are exactly alike. To speed up the process of cutting out parts, fold the paper several times.

You can achieve a natural color of the petal by applying a darker paint to the base with a brush. Using a variety of shades in one flower will give it a natural look.

The patterns are sorted and put into separate envelopes, which are signed. When you need a specific element again, you won't need to start the process by developing a template.

Conclusion

Amazing holiday compositions and unusual gifts are made from corrugated paper. Simple flowers will help decorate the table and complement the interior.

An unusual option will turn out if you use different plants. Bright poppies, delicate cornflowers and daisies are combined into a field bouquet. Multi-colored asters are complemented with greenery to give the composition a finished look.

Bouquets made of corrugated paper and sweets are especially popular. Those with a sweet tooth will love them. You can collect any flower. It is only important to choose the right shape, size and number of petals.

To create flowers, you do not need to attend expensive courses or purchase sets of tools. The manufacturing technology is simple and understandable even for novice craftswomen. Working with such material will bring pleasure to adults and children.

Photos of corrugated paper flowers

Good afternoon, today I’m finally uploading a large selection of master classes on the theme of paper flowers. Here are the most interesting ways to make paper flowers. We will make a variety of flowers - flat and three-dimensional - from corrugated paper and thick colored paper. I will show you every craft step by step in photos and I will give as much as possible detailed instructions to each flower made in one way or another. I will also give stencils– templates of flower silhouettes. All the crafts I collected are posted in order from simple to complex. First of all, we will study the MOST UNDERSTANDABLE techniques for folding paper flowers (those that are easy to understand and repeat ourselves)... and gradually move on to MORE COMPLEX and painstaking instructions (to prefabricated detailed flowers and the origami technique). I also uploaded a special article dedicated to different ways to make a paper rose - here is the link to it

And, for educators (teachers and educators) I made an article with simple children's crafts WITH FLOWERS, which can be made in classes at school and kindergarten from paper and other materials:

I specifically decided to do so big a selection of paper flowers in one place - with the goal that you can immediately find a suitable scheme for assembling a flower for THAT PAPER THAT YOU HAVE, and for the task that you want to solve with the help of paper flowers (a flower craft as a gift for mom, decorating a child's birthdays with voluminous flower arrangements, wedding decoration, decor for cards or gift bags).

The only thing I didn’t include in the body of this article was PAPER ROSES. I found ways to make a voluminous rose so much that I had to put these crafts in a separate article on the same site, it will be called that “Paper roses - 20 ways to make them yourself.”

But before we begin the master classes themselves, I want to make you fall in love with the very idea of ​​paper flowers. I want even casual visitors to this web page to have their hands itch and their eyes to light up. And I want to awaken in you delight and a burning desire to make a flower with your own hands. So that this magic arises... so that your soul also spreads its petals and blooms...

Let's see what piece of life a flower you made can decorate. Here are examples of how an ordinary table setting can become very beautiful and formal with lush floral crafts.

Also, large paper flowers made of crepe or corrugated paper are used for decorative purposes. for celebration decoration– wedding hall, children's birthday party, incendiary party. They are mounted on the wall or on the backs of chairs, or tied to window handles.

But such large flowers can be made from A4 paper (office size) or from a roll of corrugated crepe paper.

Photographers and photo studios also use voluminous large paper flowers as exclusive props for staged photographs.

You can also make such a large paper flower simply as a gift for Mother’s Day, or for March 8th. Surely no one has ever given your mother something like this before. Will be remembered for a long time. And you can also take a picture of your mother right away with this flower - she will proudly post this photo on her social media page.

Ordinary plastic combs, rims and metal pins can also be decorated with voluminous paper flowers. So we will get elegant hair decorations for a wedding or party.

Miniature paper flowers can decorate handmade cards, and other scrapbooking crafts (like these delicate crepe paper pansies).

Also, a paper flower made with your own hands is the best gift box decoration. And not costly. A lush gift ribbon costs much more than a couple of sheets of colored or white office paper - a few movements with scissors and now a paper orchid or the delicate pink color of a wild rose has bloomed on your package.

And the flowers themselves can be a great stand-alone gift. If you arrange your work in the form of a basket, or a decorative panel (as in the photo with poppies made of colored paper).

If you learn how to make paper flowers with your own hands, you can use this talent in many areas of life. It will be simple and easy for you to decorate a room for any holiday, decorate a family celebration at home, or beautifully decorate gifts for relatives and friends, or entertain the neighborhood kids by organizing an interesting craft with a master class.

METHOD No. 1

PAPER FLOWERS

I decided to call the flowers made this way "puff pastries" because their construction principle is the same as that of puff pastry. Subtle layers of floral silhouettes overlap each other. And each layer is given convex volume(or faceted relief), and due to this the flower looks lush and voluminous.

Here in the photo below we see a step-by-step master class for beginners on how to create such a voluminous dahlia flower. The dahlia is not to be confused with the aster; the aster has narrower petals and each has an edge (a raised fold like on trousers).

So... let's look carefully at the photo of the flower craft below. The trick here is that paper is cut layer outlines– each contour has six petals, and differs from its counterparts only in size. That is, the shape of the stencil is the same - only the size is different.

Before gluing each cut paper arch the silhouette in order to give it a natural shape. We begin gluing and assembling the paper dahlia from the little ones middle layers to larger and larger ones.

Of course you have a QUESTION:“And how to cut such uniformly sized petal circles-layers.

ANSWER: Here's the one simple and fast way make such a flower with your own hands as a novice master. It does not require searching for a stencil template, but allows you to obtain geometrically even petal parts for a paper flower without any measuring instruments (compasses and rulers).

1. Take a sheet of paper and glasses different radii. We trace them on a sheet of paper.
2. We cut out the resulting rounds, fold each round in four and in half again (as when cutting out a snowflake). And on such a round piece folded into a triangle we draw outlines of two petals (like a heart).
3. We cut this contour with scissors (see photo below) - we deepen the cutout in the middle of the heart - we unfold it and get a petal layer.

Because we have circles of different sizes - then we will get petal layers different in size. We set the relief, put it together, add a yellow stamen-middle (stamens will be discussed below).

Such a delicate flower can be strung on a wire (to make a stem) and presented to your mother as a paper bouquet for Mother’s Day.

ANSWER: An ordinary round stick (pencil or pen, or knitting needle) can serve as a stamp for imprinting relief on the petals. Here's how you can do it yourself, you can clearly see in the photo of a flower craft below.

The flower assembly diagram is the same as the previous one (see step-by-step photos).

Using the PAPER PAY technique you can make a variety of three-dimensional flowers (anemones, poppies, asters, dahlias, roses). The evidence is in the photo below.

You see – the same “puff” method – but the results are completely different flowers. And all due to the fact that the silhouettes of the paper petal layers are DIFFERENT IN THEIR OUTLINES.

And don’t forget that not only the contour (silhouette, shape of the petal) is important... but the RELIEF of the petals is also important. It is the correctly defined relief that transforms flat outlines into living convex layers of the future flower.

For relief we need round sticks of varying thickness (thin knitting needles, toothpicks, thick round-sided markers, felt-tip pens, spherical perfume caps, or lollipops). Any items that will help set the shape.

So that the relief lies neatly on thick paper– you may need to slightly moisten it before work (sprinkle it from a spray bottle or hold it on a wet towel). Try it and see how it works better - dry or wet.

And here's to you ready-made templates puff paper flower. Flower stencils are already several sizes. You can right now put a sheet of paper on the glowing screen and trace with a pencil these silhouettes shining through from the screen onto your sheet of paper (this is my favorite way copy the template without any printer - not every home has a printing device).

And you can also resize any template using a computer mouse.

Look - in the photo below I give you a template silhouette. Silhouette is ONE size only. Do you want to get this silhouette? different sizes– to make a multi-layer paper flower craft.

To change the size of this silhouette, you press on the keyboard with one hand buttonCtrl, and while holding this button pressed, use your other hand to turn the mouse wheel - back and forth. And from this action of yours, everything that is now drawn on your screen increases or decreases, depending on where you turn the wheel - away from you or towards you.

Try this right now– press and twist. See how the stencil design image below has changed size? This way you can directly on the computer screen, adjust the template to any size and trace it with a pencil on a sheet of paper placed on the screen of your monitor. This is the fastest way to get the outline of any flower stencil immediately in any size we need.

Here are shaped templates for future paper flowers - and you can change the size of the picture yourself. And you can design and create any paper flower with your own hands.

Let’s also take a closer look at the interesting additions to such layered colors.

How to make a stamen

in puff paper flowers.

Below is an interesting step-by-step lesson where we see how a stamen for a multi-layer paper flower is created step by step.

How to apply

large inflorescence

on one stalk.

And I would also like to show another one here clever and simple trick which allows you to do whole inflorescence of flowers on one stem. In nature, flowers are often found where many flower cups nest in one place and have common central stem.

This is exactly the kind of flower craft that the step-by-step master class in the photo below will demonstrate.

1. We cut out a bunch of stems with a common round base from green thick paper (or cardboard). We glue double-sided tape onto this round base.
2. We twist a tube from a newspaper and wrap it in green paper. Glue the tube-stem to the round base - twisting it around the stem.
3. We make flowers (from two red layers and one black stamen). We glue each flower onto its stem. We add wide leaves to the central stem-leg. It turns out to be a very beautiful stem-bouquet made of paper.

How to make a layer flower

WITH ASSYMETRICAL petals.

But in the photo below we see from what shape the layers are used to create an ORCHID paper flower with your own hands.

In a glass of water add a drop of green paint– we get light green water. We wet the white parts of the orchid with this water; they become white-green (just like in nature).

Further while the pale green petals are still wet, we apply lines of purple paint on them - on wet paper the lines themselves blur slightly - we get an uneven, blurry color (exactly like a real orchid).

The middle part of the orchid - upper layer We also make it green... and along the very edge (right along the cut of the paper) we paint it bright purple. Thus, when we lift this top layer up, the purple edges stick out with their color upward, imitating the position and color of the furry central petals of an orchid.

The same principle is used to create various asymmetrical flowers-crafts. Let's remember what other flowers do not have circular symmetry in their cup... that's right, these are PANSIES (photo below).

1. Lower layer of blue petals (total 2 pieces with location in the upper direction).
2. After blue layer petals (also 2 pieces spread out to the sides).
3. And the third top layer in the form just one white petal.
4. Then we smear the central part of the flower with yellow color, and draw the central lines with a pencil. We make yellow stamen balls from crumpled paper (or from plasticine).

A simple DIY craft that even a child can do. The main thing is to prepare templates in advance that the child will trace on colored paper.

Volumetric puff flower

made of THIN paper.

We do such techniques as “different layer sizes” and “work on folding the relief on paper petals” only when we use ordinary THICK COLORED PAPER

But if If you make flower crafts from CREPE, CRUMPTED PAPER, then you don’t need to specify the relief there. The texture of the paper itself will allow you to make a fluffy three-dimensional flower.

Moreover, The corrugated structure of the paper allows you not to even bother with getting LAYERS OF DIFFERENT SIZES. That is all layers of the flower can be the same size. The master classes on paper flowers below clearly prove this.

Do you see? All layers of the flower are the same size. We pierce the middle of the layers folded in half with a hole punch (or a needle and thread, or fasten with a stapler). Unfold the flower and fluff its layers into a fluffy pompom. These are very beautiful large paper flowers.

This is perhaps the easiest and lightning fast way to make a flower with your own hands. It turns out big, lush, rich and expressive.

If we choose napkins of two colors and apply them alternating colors, we will get a play of halftones in each layer, and our flower will look like a rose.

You see, in the method below we make identical silhouettes from napkins of two colors (in shape and size like twin brothers). Under the bottom we place a piece of cardboard with two holes (like a button... however, the cardboard can be replaced with a button). And we thread threads into the holes and pierce through all the layers of the napkin. We tie a knot in the middle of the flower and fluff out all the corrugated layers of the craft with our hands.

Think for yourself how you can diversify and complement this airy napkin flower. You can also add border color– to do this, slightly stain the cut out napkin silhouettes along the edges with an office marker.

Turn on your imagination... and let her play around with napkins to her heart's content. There is never a shortage of tea napkins. And suddenly you will give birth to your own designer flower.

And red carnations are made using the same method. Identical round pieces with a jagged edge are also cut out of a napkin - and deep cuts are made into the petal parts. And then they simply overlap each other with a drop of glue in the center... or instead of glue in the center, we pierce them with a stick (there will be a stem on it. A beautiful DIY flower craft for dad on February 23, or on Victory Day for grandpa.

And Lingeri terry daffodils are made using exactly the same principle as carnations (in the step-by-step lesson above). This is what they are like in nature – lush and voluminous.

Spring flowers made of paper are a good gift for mom on March 8th. And now you will find out how easy it is to make them yourself.

And here's how to make them from dyed paper napkins. We place a stack of napkins on top of each other - fold them into quarters - into a triangle - cut the edges with a jagged semicircle. We paint the top napkins in a bright yellow color, and the middle layers of napkins in a light yellow color, leaving the bottom layer white.

Now about the material. Daffodils are gorgeous, you say, but where can you get these paper colors (pale yellow and bright yellow)? Here, I tell you, there are 2 ways at once - 1) dye white paper napkins 2 shades of yellow... or 2) get a pale shade of yellow from bright yellow crepe crepe paper.

INSTRUCTION No. 1. How to dye a white paper napkin.

ANSWER: We paint the napkin in a straightened form with tinted water. Dye some water in a glass and pour it onto a straightened napkin. We wait for the napkin to dry naturally (about a day).

INSTRUCTION No. 2. How to make light yellow from bright yellow crepe paper.

ANSWER: Take yellow crepe paper - put it on a wet towel - put a dry white napkin on top. We iron it with an iron - the bright crepe paper gives up its moisture to the dry napkin, and along with the moisture it partially gives off its color. And we already get PALE YELLOW crepe paper. This way we can change the shades of crepe corrugated paper.

As you can see, everything is solvable - if you turn on your head and think... and try to experiment. Knowledge often comes through experience (even if this path is messy). One bad experience can give rise to several ideas at once. I somehow wet the crepe paper and ruined the craft, but I saw that when it gets wet, the crepe paper loses its color. And one day I spilled water for washing brushes on a paper napkin - and it turned a delicate, even color. So out of two jambs - I got 2 experiences in changing color for delicate and thin paper textures.

Well, this was all just about the FIRST METHOD of making paper flowers with your own hands. I deliberately made this first chapter of our article so extensive and detailed so that you immediately understand a simple and important truth:

Even one single design can have MULTIPLE CONTINUATIONS... numerous variations... endless designs. And you yourself can become the author - and create your own paper flower, made in the same way of “shaped layers superimposed on each other” ».

Now let's look at the next way to make flowers from colored paper with your own hands.

METHOD No. 2

Paper flowers

TWISTED INTO A TUBE.

We have been familiar with this method of creating flowers since childhood. We all made classic flower crafts at school or kindergarten. for February 23 - red carnations made of crumpled crepe paper. They twisted a strip of paper around a toothpick, wrapped a piece of green paper around the twist, and fluffed a bunch of flower panicles.

And it never occurred to us that inside this primitive method there was hidden a recipe for more than just the humble clove.

This method " twisting crepe paper into a roll" can give birth to completely different three-dimensional and flat flowers. It all depends on how we changed the SHAPE OF THE EDGE OF THE PAPER STRIP. Depending on its pattern, we will get paper flowers that are completely different in design.

Here's photo proof. Do you see?

Different regions produce different flowers– disheveled aster, neat chamomile, chrysanthemums. Even roses can be made in this way (but roses will be discussed in a separate article - in detail and in detail, as befits the queen of flowers).

And not only from soft corrugated (crepe) paper you can make craft flowers using this ROLL technique.

Here you go in the photo below - an example of paper flowers in the same roll rolling technique FROM REGULAR THICK COLORED PAPER (office double-sided colored paper).

This is a simple job and very simple instructions.

1. A narrow strip of paper was wound onto a thin rod (or toothpick) (to form the center of the flower).
2. And then to this rolled center they added a winding of a wider tape, already cut along the edge into petal strips.
3. And the petals are folded to the side - like a spreading umbrella.

AND IF YOU ADD A THRUST FOR EXPERIMENT TO THIS SIMPLE TWISTING TECHNIQUE, YOU CAN GET NEW DESIGNS OF PAPER FLOWERS.

For example, what if... You can’t just bend these petals to the sides with a flat, spreading daisy, but slightly twist the tip of each petal inward (as we do with curls in the morning) - and you’ll get a voluminous, lush ASTER.

What if... make a strip for twisting with AREAS OF DIFFERENT WIDTH. We see the result of this idea in the photo diagram below.

1. A narrow strip (1 cm wide) for the middle stamen (wrap it in a tight roll on a toothpick).
2. Next, we wrap a petal strip (with a fringed edge) 2 centimeters wide onto this roll.
3. And then we wind a petal strip 2.5 cm wide...
4. and then a petal strip 3 cm wide.

And thanks to the different widths of the stripes, we will get a roll flower in which the height of the petals increases from the center to the edges.

As you can see, you can and should do EXPERIMENTS with this simple roll technique. Let's continue to encourage our inquisitive mind and decide on another wild idea...

WHAT IF, cut the fringe not straight, but diagonally. And what if... this oblique fringe is not cut along the edge CUT, and along the edge of the FOLD (that is, bend the strip in half along the entire length, and cut this fold line diagonally into a fringe, and then twist it in this form.

We see the result in the photo below - an amazing aster with spirally twisting carved perforated petals. A beautiful flower craft - it looks like a difficult job, but making it with your own hands is simple and quick.

Such shaggy flowers with slanting petals can be used as a shaggy stamen for other flowers.

Like for example in this master class in the photo below. Do you see?

There, too, a bent strip is cut along the OBLIQUE FRINGE... and an orange shaggy stamen is formed - needed to decorate the center of the paper aster.

By the way, the paper aster itself from the photo below is made in a very original and simple way.

1. The base of the aster is a puff (multi-rayed star with chopped rays).
2. Each ray in the puff is bent with a slate ruler into a sharp arrow (like on trousers).
3. The layers are superimposed on each other - we get a lush flower.

And just the stamen inside this voluminous flower is made using the OBLIQUE FRINGE technique, which we just talked about.

This roll equipment can be combine with a regular petal puff (Method No. 1 from this article).. Yes – you can – because it occurs in nature. God himself once came to this idea - and created the Marigold flowers. And we will implement this method of combining a roll and a puff on paper. (see how this is done in the infographic below).

In roll technology the fluffy center of the flower is made. And using the “Puff Puff” technique“The lower petal part of the marigold flower is made of paper (templates with five-leaf silhouettes). Photo instructions for assembling the flower are below.

But here is a rosehip flower - where the stamen and the middle are also combined using the rolling twist technique and 2 petal layers. By the way, you can make them in large sheets of A4 format and stick them on the wall - and your living room will be transformed. Buy a pack of red office paper from the stationery store and play interior designer. All the neighbors will come running to gasp with delight.

But here is a flower craft where the roll technique is also used to create a fluffy panicle-stamen, and the side petals are simply glued separately onto the lower layers of the fluffy panicle-stamen.

You get large sunflowers from crepe paper.

Using a similar ROLL-BUNK + INDIVIDUAL PETAS technique, you can also make a daffodil flower with your own hands.

But these flowers, EITHER LILAC OR SALVIA - with a long stem of inflorescences, are also made using the roll technique.

Yes, yes, this is also a regular roll technique, with the only difference being that the strip of paper is not rolled into a tube, but wrapped around in a spiral roll around a long stick.

Here in the photo below is a master class of this lush paper flower.

1. A wide strip of crepe (corrugated) paper cut into long fringe.
2. We wrap the fringes on a toothpick(or a knitting needle) - and we get curls along one edge of the ribbon.
3. We take a long wooden skewer and wrap our paper ribbon with curly fringe around it - the wrapping begins from the upper end of a wooden skewer and goes down in a spiral.
4. We do it under the flower green wrapping skewer and glue wide green leaves to this stem.

Paper rose flowers

FOLDING method.

Using the roll technique, you can quickly roll up a paper rose. We will have a separate article on paper roses. But I will give two master classes right here - because they cover the roll technique of creating flowers.

Here is the first step-by-step paper rose master class. Thick paper is used here, and in order for the petal parts to have the geometry of broken pink petals, this thick paper strip needs to be PUMPED AND TWISTED around itself during the process of rolling into a roll.

And don't pay attention to these centimeters... Just take it the very essence this instruction. Cut a strip of paper from the draft and try to twist it into a rose, simply bending the strip as God wishes - the paper itself will tell you where to bend and turn it.

You will find many other options for making a paper rose from different types of paper in the article

And here's another way Roll up a roll of paper so that it looks like a rose. For such a roll, we need a paper strip NOT IN A STRAIGHT SHAPE, but to make a strip of paper IN THE SHAPE OF A SPIRAL.

Enough for this draw a snail on a sheet of cardboard(uneven curve, no matter what). This drawn spiral will be the template for our paper flower.

Now this spiral line needs to be cut and then start twisting the roll NOT FROM THE MIDDLE OF THE SPIRAL... but rather FROM ITS EDGE. And a paper rose will appear in our hands by itself.

My advice, do not use glazed slippery glossy paper for this rose craft.– such an elastic rose will strive to turn around or the spiral circles will slip out of the flower’s bed. It is better to choose rough paper or not very thick cardboard - this way the rose will better hold its shape.

Paper flowers

Method No. 3

Using the POMPOM technique.

Here's an even faster way to create a fluffy, voluminous flower. It is made using the pompom technique - from corrugated crepe paper

This technique is good because it allows you to very quickly make large flowers from paper - since crepe paper is sold in large rolls (like wallpaper). And each roll can turn into a large flower for holiday decoration.

The master class in the photo below shows how to make such a lush paper flower with your own hands. We fold a wide (20 cm wide) ribbon several times to create many layers. We cut the folded ribbon into fringe from TWO EDGES, leaving the middle intact.

We fluff the fringe of the flower in all directions - achieving the shape of a perfect circle. And we decorate the central part of the flower with a wad of black paper - and the flower resembles a disheveled poppy.

As you understand, the height of the petals depends on the length of the fringe. And the shape of the petals depends on the shape of the fringe.

Below (paper flower master class) we make anemones using exactly the same pompom technique. The difference is that we slightly changed the shape of the fringe - it’s not even a cut fringe at all, but just a beautiful curly petal edge of the napkin.

As a result, the fluffy flower no longer becomes a poppy - but a delicate anemone made of paper.

Is it absolutely possible? do not change the edge shape- that is, do not cut it or fringe it at all. Leave it flat, as it is on a napkin. Just lightly color it with a marker.

And using the same technique, we make a pompom flower with our own hands. They pinched it with wire, folded it in half, fluffed it up and got a carnation on a wire stem.

It remains to add elements from green paper - receptacle(wrap a jagged roll around the flower bowl), stalk(long green strip for wrapping the stem of the flower), leaves (long oval ones glued to the stem).

You can also make this pom-pom flower two-color with a center of a different color (see photo below). To do this, we need paper strips of two colors - one wide (yellow), and the second 2 times narrower (black).

We prepare the strips - first we cut a wide strip onto a double-sided fringe (or a patterned edge on both sides), then we make patterned edges on both sides on a narrow strip.

To make a patterned petal edge– you need to fold the strip into an accordion (as fans were made in childhood) and make a rounding on both sides of this folded fan with scissors.

After unfold the strips and put a narrow black stripe to the middle of the wide yellow stripe. We fold them again like an accordion (this time two-color).

We tie it with twine or wire. And we unfold the sides of the fan in a circle - a flower is formed. If desired, the center of the flower can be decorated with crumpled paper or cut fringe, glued between the blades of the black center.

And here is a master class that shows how to make a paper pom-pom flower WITH A FRINGED stamen with your own hands (photo instructions below).

The principle of creating this flower from paper of two colors is the same as in the previous master class. Only here the middle strip is shredded on both sides into small fringes. This is another way to make large flowers using crepe paper.

Method No. 4

Paper flowers

Twisted on a ball.

Here's another way to create flowers from crimped crepe paper.

To make such paper flowers you need wide short strips of crepe paper and balls of different sizes (lollipops, balls). We place the ball on the strip and hug the ball with the strip on both sides - we twist the tails and ends of the strip into a tight flagellum. Carefully remove the ball, trying not to crush the inflated petal template. We make several of these petals and collect them into a lush flower.

Using the same principle, rounded crocus petals are made from corrugated paper (photo below). Here you need a longer paper strip - it is placed on the ball with one half. The other half twists at the top of the ball and goes back behind the back of the ball and lies on top of its first half. The result is a rounded petal.

If you put these petals close to each other, you will get a cup of a closed crocus flower (as in the photo below). Excellent craft-flowers for March 8th for mom.

You can make a lot of bouquets from crepe corrugated paper. Including bouquets of sweets.

Method No. 5

FLOWERS made of paper

Using ORIGAMI technique.

And now we will talk about folding flowers from paper - without any cutting with scissors. That is, about the art of origami.

The first model is flowers with conical petals. They are so handsome. Each petal of such a flower is made from a simple square of paper. Using simple origami technique.

All the finished petals are glued to each other - and a beautiful rhinestone-stone is placed in the center of the gluing.

These craft flowers are very easy and quick to make yourself – and they look very elegant on gift wrapping. You can even decorate a Christmas tree with them.

As soon as you pick up a square of paper and look at the master class below, you will immediately make the same petal. It’s very simple – you start doing it and you understand everything along the way. And you are surprised that this is not taught in kindergarten - everything is so simple and accessible to the common person. After module 10, when the entire pattern of the flower has already been absorbed into your subconscious, your hands do everything almost blindly - automatically.

If you take a roll of plain wallpaper as paper and cut it into large squares, you can get large-sized flowers to decorate a room or decorate a home celebration.

And also due to the fact that these flowers have the shape of a CONE, it is convenient to collect them into one common large ball. And use it as a pendant. Or as a crown for a decorative tree (which is usually used to decorate weddings).

Here is a master class on a large water lily and paper folding techniques without cutting.

But here is an interesting method where the petal modules are made separately, and then each module is not glued, but simply inserted into the grooves of the adjacent module.

These handmade paper flowers can be an excellent craft for any occasion. You can now make paper flowers using different techniques and teach it to your children. You can use these ideas for holiday decorations or for activities in the Skillful Hands group. Such flowers are suitable as crafts for the Spring competition at school or kindergarten. Or these flowers can be a gift for mom on March 8th - a bouquet of paper flowers made by yourself.
Lots of simple ideas for children's crafts on the theme of flowers you will find in our other articles:

Happy crafting!
Olga Klishevskaya, especially for the site

This paper flower tutorial uses photographs from the following sites: http://www.wikihow.com http://www.instructables.com http://tipnut.com http://www.twopinkcanaries.com http:// www.marthastewart.com http://vivatunisie.com http://www.linazlina.com