How easy it is to tuck a duvet into a duvet cover. How to quickly tuck a blanket into a duvet cover? Video: How to quickly tuck a blanket into a duvet cover

While we are small, mothers do all the hard work for us: cook, wash, clean, change bed linen. The latter causes particular difficulty even in adults. A duvet cover and a blanket do not want to be friends with many men and women. So after all, how to quickly tuck a blanket into a duvet cover so that both the nerves are in order and the bedding is intact?

There are different cuts of bedding, the most common are duvet covers with a hole in the side, bottom, less often with a geometric hole in the middle. The latter variety was especially popular in the Soviet Union. Such products are easy to put on a blanket, but it is also easy to get tangled in them with your feet at night. Consider the two most popular configurations.

Hole at the bottom of the duvet cover

In this variant, the wrong side of the linen is usually taken, combined with the corners of the plaid, they are turned inside out together (the blanket goes in, and the front side of the duvet cover goes out), they shake with the son-in-law for complete straightening. The difficulty arises in the fact that all the weight is on the hands, and it is very easy to get lost in this thickness of tissue. Regular users with remarkable ingenuity have long figured out how to quickly tuck a blanket into a duvet cover.

To do this, it is enough to lay out the bedding on the floor from the wrong side, and place a blanket on top. The corners must be carefully aligned. Next, the linen, together with the blanket, is wrapped in a tube, starting from the side opposite from the hole. The trick will take place when you completely form the "sausage", screw the edges into the hole and begin to unfold the tube from the front side and the blanket inside. After watching a master class on this method and a little training, you yourself can enlighten your friends on how to quickly tuck a blanket into a duvet cover without magic.

Hole on the side of the duvet cover

If in the first case confusion does not occur so often, then this is much more difficult. In the absence of the concept of putting on bed linen, there is a high risk of losing the corners of the blanket, confusing the short and long sides, and even accidentally tying a knot.

How to quickly tuck a blanket into a duvet cover on the side? The answer to this question is simple:

First, roll the blanket into a tube (the narrow side is the beginning).
Next, insert the bundle into the duvet cover. Note that it should be inside out.
Then we combine the free ends of the blanket with the corners of the linen, shake the whole structure, and the blanket will unfold on its own inside the duvet cover.

For those who could not master this technique, and the corners are still lost, we recommend using clothespins or special clips to securely fix the duvet and duvet cover to each other.

Little tricks

Choose bedding that matches the size of the blanket, otherwise there will be lumps or extra fabric, which is unpleasant, and besides, it interferes with putting on bedding items on top of each other.
Synthetic fabric can quickly become magnetized and stick to the blanket in the wrong place, which also affects the speed of filling the pastel.

No need to puzzle over how to quickly tuck a blanket into a duvet cover. It only takes a little practice, and any underwear will only bring you pleasure, even in the process of putting it on a blanket.

Many of us often have to do unpleasant but necessary things around the house. And for sure, many, when changing bed linen, are faced with a problem when the blanket does not want to “climb” into the duvet cover. Here you have to tinker a little. But it turns out that you just need to know a few technologies, how to tuck a blanket into a duvet cover, and you don’t need two people strong in body and spirit and half an hour of time spent for this. Just a few simple steps, and your bed will be made even and smooth on the bed, and you will not have to fight in a nervous fit next to you. Let's take a look at how this can be done.

Option number 1

To change bed linen:

Of course, first you need to prepare the very “culprit” of the event - a duvet cover and, of course, a blanket.
Then, with decisive movements, turn your duvet cover inside out.
Now put your hands inside, find the top corners and put those corners on your hands like a rag doll.

Important! Try not to confuse the sides of these two things by matching the angles you need. This will depend on where your bedding item has the slot.

Take the appropriate corners of the product to fill it with your hands, dressed in a duvet cover. Try to hold them tight - this will be very important for the next step.
Continuing to hold the connected corners, turn inside out and drape the duvet cover over the duvet in one precise motion.
Shake it again so that everything falls into place.
Straighten the “dressed” inside, laying out the product on the bed and fasten the buttons or zipper.

Option number 2

Who among us likes to change bed linen? No one! Unfortunately, everything is confusing, so let's look at another option, how you can easily tuck a blanket into a duvet cover. For this:

Turn the decorative textiles inside out and grab your favorite duvet. In this case, the hole should be at the bottom.
Lay the warm product on the decorative textiles so that the corner coincides with the corner.
Roll it all together into a tube.
Put the slot on the resulting "sausage".
Turn the product out through the slot.
Unroll it all the way and give it a good shake a couple of times.
Put it on the bed and enjoy your skill.

Always before buying a new decorative textile for sleeping, carefully check its dimensions - whether they match with existing items. This will help to avoid many problems associated with changing bed linen.
Pay attention to the size of the slot itself. If it is too large, the blanket will regularly fall out and slip during sleep, especially if you are constantly tossing and turning. If the slot is too small, it will be problematic to change the linen, because you have to literally push the blanket inside the duvet cover by force.

Important! Give preference to natural or very high quality synthetic fabrics for all bedding. So you do not have to deal with the fact that the blanket, pillow will slide inside the linen and become electrified.

footage

It is very difficult to quickly tuck a blanket into a duvet cover: you have to fiddle with a crumpled and tangled canvas for a long time to find the right ends. Sometimes for this you need to try hard, straightening all the folds of a bulk product. If the female half successfully copes with this, men, not wanting to burden themselves, manage with one blanket, without using a cover. This approach to the design of the bed eliminates the hygiene of the rest.

To understand how to quickly tuck a blanket into a duvet cover, you need to know some of the nuances.

A bit of history

A duvet cover as an element of bed linen appeared in the middle of the 20th century. Until that time, it was replaced by a sheet, although it was often not used either. The product was inaccessible: it was made from expensive fabrics, so the rich used it. Half a century later, the duvet cover began to appear in the homes of the poor.

The cost of such models and the quality of the material differed markedly from high-end analogues.

Duvet cover sizes

Blankets can have standard sizes and adapted to the dimensions of the bed. Most often, sizes are dictated by GOST, options prepared at home may not adhere to generally accepted standards. The dimensions of the duvet covers are adjusted to the parameters of the blankets.

All types of accessories are divided into four lines:

Single. 75x180 cm is the smallest size in this category. The width of the duvet cover varies up to 120 cm, the height is usually about 190 cm. Among all the brothers, such an accessory is less in demand: its width is not convenient for an adult to sleep (it is more appropriate for a teenager).
One and a half. 155x215 cm - a popular and common "Euro and a half" size. 140x205 cm - Russian size according to GOST. Such a duvet cover is more comfortable and is a sought-after pastel accessory.

Double room (family). The category includes models for two and euro parameters (175x205, 195x215, 220x240, 240x260 cm).
Children's. 110x140 cm, 125x150 cm - adapted to the size of baby cots. "Teenage" size - 143x210 cm, 150x200 cm.

Each line includes a lot of sizes, which allows the buyer to choose a cover for a blanket as accurately as possible. When buying, the dimensions of a particular product are taken into account, although ideally the duvet cover should be at least a couple of centimeters larger (it shrinks after washing).

Some brands take this into account by adding a few centimeters to the length and width of the product.

Types of duvet covers

This important item ensures hygiene, comfortable sleep and makes the duvet warmer. It protects the blanket from dust and dirt. In addition to the standard varieties, there are variations of the two-sided plan, the upper and lower sides of which are the same, so the product can be turned over to either side as desired.

Varieties of models include options that have:

bottom cut(Russian manufacturing standard) - a popular type of duvet cover, characterized by convenience and the possibility of double-sided use. The model is easy to put on using certain tricks, but it has a minus: if there is no fastener, the blanket strives to leave the duvet cover.

Side slit- a popular version of a baby blanket, in which the blanket does not fall out of the cover. Variety originally from European countries, difficult to put on, while the cover hides the entire blanket (if the dimensions are chosen correctly, there is no risk of the warm blanket falling out).

Cut in the middle- Soviet version with a square, rectangular, diamond-shaped hole or a narrow strip in the center. It is one of the most difficult products to fill, and it also involves the use of only one side.

Such varieties are becoming a thing of the past today, giving way to more mobile counterparts.

Refueling methods

Each type of duvet covers has its own ways of easy threading.

Ease is achieved with frequent training and the use of life hacks:

Standard- a well-known method of refueling, in which each corner is inserted separately. Suitable for a cut in the middle. To facilitate the mission, a blanket is placed in the center of the slot, making sure that the corners of the blanket and the duvet cover match. An unloved method among housewives, since the corners are spreading, the blanket is tangled, the help of another person or clamps is required, which takes a lot of time.

"Pillowcase"- the blanket is spread on the bed, then the duvet cover is turned inside out. Pushing their hands from the inside to the corners of the duvet cover, they grab the corners of the blanket from the narrow side. After that, the blanket is pulled over, the duvet cover is unfolded in the likeness of a pillowcase on a pillow and shaken. It remains to insert the two remaining corners, straighten and shake the blanket.

The method is suitable for seams on the bottom and side of the duvet cover, (the side seam will be difficult if the duvet is large and heavy).

"Sausage"- a life hack of the Internet from the category of "catch in 60 seconds", which surprises with its simplicity, ease and has a little trick. The duvet cover turned inside out is spread on the bed, a blanket is laid on top. Starting from the side without a hole, roll up the roll. Holding the corners, turn the duvet cover inside out to put it on the resulting sausage, then unroll and shake. The life hack is suitable for a duvet cover model with a slit at the bottom. The mission becomes more difficult if the incision is small.

This life hack is also suitable for a case with a hole in the middle, but filling it will be more difficult. Here you need to wrap two "sausages" to the center and turn each one after the other

"Rhombus"- a method for models with a hole in the center in the form of a rhombus or square. First, a duvet cover is laid on the bed, covering it with a blanket. Two corners are tucked in from the narrow side, the other half of the blanket is pushed into the hole further away. It remains to grab the tucked corners and shake the blanket. It is also possible that half of the duvet cover is turned inside out. In this case, grab the corners and twist. Then carry out the procedure as in the previous method.

You can turn both sides out, alternately putting them on a blanket. In this case, the duvet cover should lie with the hole down.

"Sidewall"- a method in which the blanket is rolled into a tube, where the narrow side is considered the beginning. The resulting bundle is threaded into the side hole of the duvet cover. The free corners are combined with the corners of the duvet cover and shaken. If the blanket is heavy, you can help yourself with clothespins or office clips.

Few people know, but the material of the duvet cover, as well as non-compliance with the parameters of both pastel accessories, may be the reason for the difficult threading of the blanket into the cover. We often scold sellers for producing non-standard products, not paying attention to the dimensions, and we are sincerely surprised that the blanket does not want to fit inside the cover.

To simplify the procedure of putting on a duvet cover, save nerve cells, you should take note of a few simple tips:

Use natural fabrics. When threaded, synthetics will become magnetized, which will slow down the process - the duvet cover will begin to stick to the blanket, rewarding the user with a discharge of static electricity.
Buy the sizes correctly, respecting the parameters of the blanket. The elements must match each other: a small size will wrinkle and create lumps, in a large duvet cover the blanket will be “lost” and tangled. In this case, the rest can not be as comfortable as possible.

Do not hurry. On the first try, using life hacks can be difficult. It is worth practicing to easily adapt to them and put on a duvet cover quickly. If the first time can take you a few minutes, after a couple of attempts you will meet the promised 30-60 seconds.
Fix the threaded product. If your children or you are active in your sleep, a duvet-packed blanket will quickly become like a shapeless lump in a bag. Various methods are provided for fixing (for example, ribbons that tie together), but they should not be extreme (pins or metal clips are unacceptable).

Quilt and duvet cover - we come across them every day, and this couple of home comfort items has become the occasion for many jokes.

While a robot has not yet been invented that will do it for us, and at the same time deal with numerous pillowcases and pillows, we have selected three life hacks that will help you simplify this task.

Method 1: Classic

This is the most familiar way for most of us, which does not take much time and allows us to deal with our problem alone:

First, we just straighten the blanket on the bed.

Then we turn the duvet cover inside out and take hold of its corners so that one opposite corner of it is in each hand.

Then we grab the corners of the blanket so that they coincide with the corners of the duvet cover.

We shake it so that the blanket itself falls into the duvet cover and straightens out inside.

There are a few more tips that are great for this method. The first is to cut off the corners of the duvet cover or purchase a ready-made duvet cover without corners. This way it's much easier for us to grab the blanket and make sure the sides match up.

The second way is to sew braid on the blanket and duvet cover. If you tie them together, the blanket will be securely fixed on four sides and will not tangle at night.

Some manufacturers produce quilts with elastic bands for fastening and duvet covers with drawstrings.

Method 2: Roll

This method is much easier than the first, and is ideal for a duvet cover with a zipper or other closure with a slot from edge to edge:

So, first of all, we need to turn the duvet cover inside out and straighten it on the bed.

Then we put a blanket on top.

Check if the corners and sides match. In order for everything to work out as easily as we would like, the sides should be quite clearly aligned. Again, ribbons on the blanket and duvet cover can come to the rescue here, they can be tied, thereby securing the blanket.

Stand opposite the closed side of the duvet cover, and roll the duvet together with the duvet cover into a single roll. In the course of twisting, do not forget to check that the sides do not go astray.

Grasp one side of the duvet cover and gently tuck the duvet in so that you can zip up the duvet cover.

We have a finished roll that needs to be carefully untwisted right on the bed. Done - a blanket inside a duvet cover!

If the sides do not match, it is enough to shake the blanket a couple of times. In the same way as in other ways.

Method 3: Corners

This method is only convenient if you fill the blanket with two people, but this is how it becomes much easier than the rest.

First we need to put the duvet cover and straighten it on the bed so that the fastener is on the bottom.

After that, we put a blanket on top, on the underside of the bed.

We tuck the corners of the blanket into the duvet cover on both sides at the same time and grab them so that they do not move.

Method 4

For the laziest, there is another, perhaps the easiest way out - a duvet cover with zippers on two sides. It is much easier to deal with him, but he does not guarantee comfort during the rest.

Well, we hope that one of the proposed methods will still be convenient for you!

House cleaning is a tedious task. Only a change of bed linen costs the hostess a huge effort. Very often the question is raised about how to quickly tuck a blanket into a duvet cover, avoiding torment. A detailed analysis of the duvet cover device and a number of useful life hacks will help to finally deal with the problem.

You can put on a duvet cover quickly and easily, our tips will help you with this.

Duvet covers come in many varieties. The classification is made depending on the place of the cutout, shape, method of fastening. It is customary to distinguish two main categories - "B" and "C". "B" has a notch in the middle. And “B” are closed products. Most often they have a special fastener.

According to the types of holes, duvet covers are divided into:

with a hole at the bottom;
Bottom slit - a popular type of duvet cover, characterized by convenience and the possibility of double-sided use
with a hole on the side;
Side slit - a popular option for a baby blanket, in which the blanket does not fall out of the cover
with a hole in the middle.
Cut in the middle - Soviet version with a square, rectangular, diamond-shaped hole or a narrow strip in the center

The most popular now are products with a hole at the bottom. They are the most convenient and practical. Products with a slot in the middle were actively used during the Soviet era. But practice has proven their inconvenience during the change of bed linen. Each type has its own special tricks regarding operation.

Depending on the size, bedding sets are divided into types.

Duvet cover sizes include:

It is very important that the duvet cover fits the size of the duvet. This will greatly save the strength of the hostess. Incorrect selection will also interfere with direct use: lumps may form that will interfere during sleep.

Knowing the type and size of your duvet cover will make changing your sheets much easier. This will help you quickly find the right "life hack".

How to quickly tuck a blanket into a duvet cover: life hacks

This option is called "sausage". First you need to turn the product inside out, and then straighten it. Cover with a blanket on top so that the corners match very precisely. Next, you need to twist the blanket and duvet cover with a tube.

We twist a blanket with a duvet cover into a tube

You need to do this from top to bottom, trying to reach the incision. When the “tube” is ready, turn it right side out from the slot.

We put the slot of the duvet cover on the resulting “sausage”

Unfold the blanket out through the slit

The blanket just needs to be pulled out. The effect is guaranteed!

We unwind the blanket to the end and shake it a couple of times.

Side slot options

A duvet cover with a side slot creates great difficulties. First, the blanket is folded into a tube. The resulting product must be inserted inside the product. The ends fit neatly. The design is shaken until the blanket itself takes the ideal position, excluding the occurrence of lumps, the corner falling out of its place.

A blanket is placed in the slot, its ends are brought to the inside of the corners of the product. The corners must match exactly.

We put our hands inside so that the palms rest against the two upper corners.

Grab the top two corners with the duvet cover inside

Shake again.

Shake the blanket, continuing to hold the outer corners

Tuck a duvet together

It is much more efficient to shake the blanket using four hands. You can hold two pairs of corners at once. The blanket straightens much faster, and the quality of work is only higher.

Putting on a duvet cover together is faster and easier

The blanket is covered with a product. Corners are filled from the narrow side.

Fold vertically again and insert in this position into the duvet cover

The rest is pushed forward. The blanket is shaken until it takes the ideal position.

We take the two upper corners of the blanket and duvet cover, open the blanket wide, shake it well

Putting on a blanket can be really hard. But with the help of a little effort and ingenuity, this difficult task is submitted to any hostess. The main thing is to take into account the size and variety of the product. Their features are the key to success, a guarantee of maintaining strength.

Duvet cover that does not need to be tucked in