Is it possible to sew jeans at the bottom. How to sew pants: a few simple tips. How to sew jeans on the pope along the back seam at home

You don't have to be a professional tailor to do this. It is enough to use their techniques and in just an hour and a half you can get an excellent result.

What will be needed for this? Sewing machine, iron with steamer, ruler, crayon, scissors, needle, matching thread and tailor's ripper and pins.

How to properly narrow your trousers

To narrow women's trousers like the pros do, you should not make the mistake that almost all beginners make. You will have to remove unnecessary width not only from the side, but from the inner seams, while maintaining the symmetry of the existing cut. Otherwise, it is simply impossible to achieve a perfect fit on the figure. And do not neglect the intermediate steps - such as basting or steaming, only in this case, the result of the work will please you.

So. Turn the trousers inside out and carefully undo the hem, then undo the side and inside seams. If you are narrowing the trousers along the entire length, it will not be superfluous to rip part of the crotch as well. Then, properly steam the seams and let the fabric dry.

Now start marking. Measure along the bottom edge of the leg the width that you need, but be sure to maintain symmetry, retreating from the edges an equal number of centimeters. Now draw a small thin line from the markup on the bottom edge to the hip line, repeating the direction of the original seams.

It is imperative to lay a basting along the intended line - with small, neat stitches, make sure that the front and rear panels do not move. For reliability, they can be fastened with simple tailor's pins.

How to make skinny pants

After you have swept away the model, you must definitely try it on. Put on your pants and carefully examine the result of the work - you can correct it just at this stage. Correctly narrowed trousers should sit on the figure like a glove. The easiest way to achieve this is if the fabric contains elastane, it will provide plasticity and a good fit. But you need to be especially careful with natural cotton or wool, in which case a good fit will have to be achieved through precisely laid seams.

When trying on, professional dressmakers use a simple technique that allows you to perfectly fit the item according to the figure. Put your trousers on inside out and you will see exactly where you can remove and where you need to add.

If the result satisfied you, it remains only to stitch the seams along the basting, get rid of it and carefully process the edges. Cut off all unnecessary, retreating from the new seams one and a half centimeters. If you do not count on the accuracy of your eye, draw an auxiliary line and cut along it. Now the edges must be processed on an overlock or a zig-zag seam and carefully smooth the seams.

Tuck the bottom hem without changing its width and secure with a hidden or velvet seam. Your new skinny trousers are made like in the best atelier!

How to narrow dress pants

To turn any model into stylish "cigarettes" or "pipes" you need to take into account a few professional nuances. Wide from the hip and throughout the valley, you can narrow down the classic trousers as you wish using the basic techniques described above. But before you get down to business, keep in mind that such models should be sewn in strictly repeating the silhouette lines.

In the case of complex models and a thorough alteration, be sure to open the step seam, it is easy to restore it by laying a double line at the end of the work along the same lines. So you can proportionally reduce the volume in the hips, and get rid of unattractive creases and folds.

In order for the silhouette of the finished model to fit exactly on the figure, be sure to mark the knee line even at the marking stage. To do this, measure the distance from it to the waist - for each figure it is different - and set it aside from the model's belt. This mark will give you the opportunity to find the correct position of the new seams, now smoothly connect it to the marks on the bottom edge.

This is especially important if you want to narrow your trousers down like in banana or cigarette cuts. Measure the circumference of your knee with a measuring tape, divide it in half and add 2-3 centimeters to the freedom of the fit. Strictly symmetrically set aside this length along the knee line and draw a smooth line to the model's waist.

The width of the model in the hips can be adjusted to your own parameters. But the width of the lower edge in this case should remain no more than 15-18 centimeters. Set it aside just as strictly symmetrical with respect to the side and inner seams and gently sweep. It is these proportions that will provide the desired fit and excellent fit.

An outdated style of jeans can be turned into a trendy one, especially when it comes to a narrow cut, which has just become relevant. And you can do it at home, you only need the basics of sewing skills, a sewing machine and desire.

First you need to turn the old trousers inside out and put them on. As a rule, skinny jeans are always tight, so try to stretch the material a little on the sides. Determine the area to be cut off, it can be marked with ordinary pins. To do this, fix the material with them along the entire required length. Then carefully remove the jeans so that the pins do not fall out, and you do not get hurt. After that, you need to draw a line along the pin markings with a pencil and a ruler.

Experienced seamstresses already at this stage can proceed directly to sewing on a typewriter. And for those who do not have much experience, you must first sweep by hand, gradually pulling out the pins.

After that, you can scribble. In the process, try to maintain a straight line of stitching, take your time and do it carefully. When you stitch the jeans along the intended line, you need to cut off the excess, leaving a couple of centimeters at the edges. To process the edge, you will need a special machine or just a more modern model to flash with an overlock or zigzag. All jeans are ready! And they are no worse than those sold in stores, and you still have the money that would be required to buy a “new thing”.

There is another way to turn old jeans into trendy ones. It is suitable for those who already have trendy skinny jeans. In this case, you do not have to spend time trying on. You just need to attach tight jeans to the old ones and circle their outline. Well, then follows a repetition of the points described above - sweep and stitch on a typewriter.

By the way, by stitching not once, but twice, you can ensure that the seam will be more durable.

With jeans, another problem may arise - too much length. It is clear that girls and young people of small stature suffer the most from this, since models for the average length of the legs are put on sale. As a result, many are ready to buy jeans that are even too long and then give them to the atelier, just to replenish their wardrobe and not suffer from the selection of the model of trousers that would fit perfectly.

But it is not necessary to immediately give the purchase to the master in order for him to hem it. This can be done quite independently. There is absolutely nothing complicated: you need to put on jeans, mark a line along which you should then cut the fabric. At the same time, it is important not to forget to step back a few centimeters from the intended line in order to tuck the jeans and stitch the edges on a typewriter.

It will take no more than one hour to hem the jeans yourself. But the money that would have to be spent on paying for the work of the master in the studio will be saved. And the quality, of course, with due diligence, will be no worse than that of a professional. If you are afraid to ruin your jeans, do not know the basic rules for working with a sewing machine, it is better to give the item to the studio.

More and more gaining popularity. And it is not surprising that many people have a question - how to convert wide jeans into skinny jeans? How to narrow your jeans yourself? Why remake, and not buy new ones in the store. Because doing something with your own hands is interesting. And because almost everyone has wide jeans that are already tired. But which may well serve and even become a wardrobe decoration as tight jeans. Banal savings on buying new jeans can also be a reason to do denim needlework. But there is another reason to make your own skinny jeans. As a rule, these jeans sit on you much more comfortably than any bought in the store.

Making skinny jeans out of wide ones is quite within the power of anyone who knows how to hold a needle in their hands and handle a sewing machine. There are several ways to make skinny jeans out of wide jeans.

First way. Simplest.

Turn your jeans inside out and put them on.

We pin the jeans with pins along the outer seam or along the inner seam (depending on your body and on the original style of the jeans) so that they fit the body tightly. At this stage it is better to ask someone to help. Because it is difficult to stand up straight and pin the pins tight to your body on your own. If you bend down, then pinning the jeans neatly may not work.

Carefully remove the jeans, draw a line along the pins and sweep along the drawn line.

We try on the jeans again, leaving them turned inside out. Correct if necessary. Usually you have to grab a little more, usually in the upper part.

We sew the seam on the machine. On the stitched seam, draw a line on the second leg and sew it in the same way. How to make a seam depends on your desire and on your capabilities.

The second way. Not much harder than the first, but requires skinny jeans that fit you perfectly.

We turn the jeans inside out and lay them out on a large table or on the floor.

We attach our tight jeans to them and mark a new seam line on the wide jeans.

We are not stitching yet, but we are simply sweeping jeans about the intended line.

We put on sour cream jeans turned inside out and adjust the new seam in place, pinning where necessary with pins. Just like we did in the previous method.

Again we sweep over the pinned pins.

You can try on jeans again and if everything is fine, we sew the seam on a typewriter. On the first leg we make the second.

Both methods have a common complexity. These are the existing seams. If the jeans are stitched on the outside with a double seam, and the jeans need to be narrowed from the hip, then the seam will be a hindrance. No matter how hard we try, the transition from the old seam to the new one will be noticeable. The solution may be to completely cut out the old seam. But this is not always possible. Another way is to carefully cut the seam to the right place on both sides. And after the jeans are narrowed, sew it right over the new seam. But this method is also not without drawbacks.

The solution may be to choose jeans without a double outer seam. Or use the third way to narrow the jeans.

The third way. Perhaps not the most complex in terms of technology, but definitely not simple and very laborious. But the most interesting.

After we have decided on the line along which the jeans should be sewn (it doesn’t matter how: along other tight jeans or directly along the leg), we cut out the excess fabric, as if making a cut on the legs. We sew the edges and sew from the inside to the cut, instead of a seam, a patterned fabric or. Finishing the cut with stitched stripes of denim will look great. Cut off pieces of jeans are suitable for this. This method is great (and solves the problem) if you need to narrow your jeans from the hip.

Fourth way. The most difficult way, requiring not only tight jeans that fit perfectly on you and are already worn out or damaged, but also cutting and sewing skills.

We just rip wide jeans into separate patterns. Then we rip out the old or damaged skinny jeans and transfer the patterns of skinny jeans to pieces of wide jeans. If you have proven patterns for skinny jeans, then you may not need old skinny jeans. We cut out new patterns and re-sew the jeans. This method is not really a remake. It is rather the manufacture of jeans, which not every atelier can handle.

It is quite possible that you have more ideas - how to narrow wide jeans, how to make skinny skinny jeans out of boring wide jeans. Share these ideas.

Very often, when buying jeans without trying them on, we find an unpleasant fact at home - the thing does not sit on the figure as we would like. To fix the problem of wide legs will help recommendations on how to narrow jeans from the bottom at home. Thanks to this, you can adjust your favorite thing to the parameters of the figure.

There are several ways to determine exactly how many centimeters you can narrow denim trousers:

• using a second pair of jeans. We select your favorite, well-fitting jeans. Turn both pairs of denim pants inside out. Attach two samples to each other. Carefully trace the line of the future seam with chalk or a piece of sharpened soap and mark the desired length of the product;
• using the sample method. Turn inside out jeans that need to be adjusted. Carefully, so as not to prick, fix the line of the future seam with pins. Adjust the length if necessary. Remove the jeans and, guided by the pins, draw a seam line with chalk.

Pants can only be worn to the knee. When determining the width of the leg, be sure to keep in mind that jeans should be removed without problems, they should be comfortable to move, sit down, and raise your leg. It is not necessary to narrow the trousers very much, as they will gather in folds near the knee. Always leave a few centimeters to spare.

Preparing the model for work

You can quickly narrow jeans at home, subject to a certain algorithm. The first stage is product preparation. To do this, the jeans are turned inside out and ripped open the bottom edge. The trousers are ironed well, paying special attention to the ripped seams.

The work of narrowing jeans requires the utmost care and caution. Do not rush and then you will not have to give your favorite thing for alteration in the studio or throw it away.

One of the prerequisites for quick and high-quality work on how to narrow jeans from the bottom at home is the preparation of tools and materials.

The work will need:

• sewing machine (preferably electric);
• overlock (if not, you can use a zigzag stitch);
• tailor's scissors - the most suitable option for thick denim;
• tailor's chalk (you can use a sharply sharpened remnant);
• iron (it’s good if there is a steam function);
• threads;
• sewing needles;
• long wooden ruler, measuring tape;
• ironing board.

Stages of work

Each stage of work on narrowing jeans requires accuracy and care. Jeans are sewn along the inner and outer side seams, along which decorative stitches pass.

Along the side seams

After the denim trousers are prepared for work (opened, ironed, turned inside out), you can proceed to the main stage of work - narrowing.

Action algorithm:

• when trying on jeans for yourself, mark the places that need to be sewn in;
• pin the line of the future inner seam with pins;
• Check again if the marks are correct. The product should fit well on the figure, without creating discomfort when moving;
• place the denim pants on a hard surface and carefully smooth out any creases and bumps;
• draw a seam line along the pin marks with a tailor's chalk or soap;
• sweep denim with wide stitches;
• Try on the jeans again so that you can correct the fit if necessary. If the trousers are very long, then first of all they are shortened, and only then they are sutured;
• leaving allowances for the seams (1.5-2 cm), cut off the excess fabric;
• with the help of an overlock (or using a stitch, a zigzag on a sewing machine), we process the cut edge. It is better to choose threads to match the tone of denim. It is necessary to process the cut edges, as the denim is loose;
• stitch new seams, trying to make the transition from the old seam to the new one smoother;
• iron the new seams on the ironing board;
• processing the bottom of the jeans. To do this, align the bottom edge of each leg. Considering that the edge is processed by the seam method in the hem, do not forget to leave allowances for the seams (3-4 cm).

To make the work look neat and finished, it is necessary to perform stitching.

Action algorithm:

• we fill the machine with a thread to match the already existing stitching;
• we lay a decorative seam, as close as possible in the length of the stitch to the factory seams;
• We iron each seam with a steam iron.

In order for the stitching to merge as much as possible with existing seams, the masters recommend:

• pick up thick threads (in some cases, you can use two thin threads at the same time);
• black thread can be used in the shuttle;
• A special nozzle-block on the ironing board will help you quickly and efficiently smooth out rough stitching seams.

Skinny jeans bottom using old trousers

The procedure for narrowing with old jeans is no different from the method of narrowing along the side seams. The only difference is that jeans that fit well on the figure serve as a pattern for new seams. Even if the pattern jeans sit on the figure without flaws, a new thing must be tried on before stitching.

Using a pattern

This is the most difficult method, requiring time and certain skills in work. But it is he who allows you to get the highest quality result of perfectly fitting jeans. Also, the pattern method is well suited when you need to adjust several pairs of denim trousers at once.

Action algorithm:

• jeans that fit well on the figure are ripped and the contour is transferred to a paper pattern;
• wide jeans that require alteration are ripped open;
• impose a pattern on the prepared canvas and circle it along the contour;
• with a seam allowance (2-3 cm), cut off excess fabric;
• new seams are sewn on a sewing machine;
• jeans are turned inside out, ironed and stitched;
• bend and sew the bottom of the product.

Without using a sewing machine

When there are not sufficient sewing skills, you can quickly narrow the jeans at the bottom using the following technique:

• put on jeans and stand in front of a mirror;
• pinch the legs at the bottom with your hand to the required width;
• fold excess fabric to the left side;
• holding the wrapped edge with your hand, tuck the leg several times;
• evaluate the result;
• do the same manipulations with the second leg of the trousers.

Using the tapering method without a sewing machine, you can experiment with the width and height of jeans every day.

It is not difficult to narrow jeans with your own hands. The main thing is to act without haste, to follow a certain sequence.

Video

Those timeless jeans

Jeans in themselves are an indispensable thing, and, with good quality, almost “indestructible”. However, the fashion for them tends to change, and the flare that was relevant five years ago is no longer in trend today. I somehow don’t want to look “unfashionable”, but it’s a pity to throw away a good and, moreover, favorite thing. But what are jeans good for? The fact that only models change, and the fabric itself remains relevant

noah. And it is this factor that can be easily used to your advantage. And since there is a general fashion for tight pants today, let's try to make them ourselves from old jeans that have gone out of fashion. Consider several options for how to properly sew in jeans.

Turning old into new

Take your old, favorite pants that you want to turn into a fashionable new piece, turn them inside out and put them on. Using pins with "ears", designate the part of the pants that will need to be cut off in the future. This procedure is done from the outside.

each leg. Just pick up the excess and stab with pins along the length of the leg you need. After you have pinned both legs, the jeans must be carefully removed so as not to inadvertently injure yourself with a pin or lose a few accidentally dropped out. Now, before sewing in jeans, they need to be laid out in a stabbed form exactly on the table and draw a seam line along the pin mark with a pencil under the ruler. If you have experience in sewing, you can immediately sew jeans on a typewriter. If there is no such experience, then it would be more appropriate to first manually sweep the trousers, then remove the pins from them, and only then, slowly, sew. After that, the excess will need to be cut off, leaving a centimeter and a half to process the edge with an overlock or a zigzag machine function. This is perhaps the easiest way to sew in jeans. It remains to turn them on the front side and try on. It should turn out exactly what you intended.

And another way

If you already have fashionable tight pants in stock, then the method of sewing in jeans can be simplified. Lay the old jeans turned inside out on the table, put the new jeans on top of them as a guideline, and make outlines on them by tracing the outline with a pencil. And then you do the same procedure as in the previous version: sweep by hand and sew with a machine. To make the seam stronger, you can sew twice.

Cut off all excess

But some people have another problem with jeans - their excessive length. Girls (and guys) of small stature are especially tormented with the choice. Since it is quite problematic for them to find pants of a suitable length, they take those that just fit well on the figure, and then give them to the atelier for sewing. If you do not feel like running around the atelier, use the simple method of sewing in jeans from the bottom. Put on your pants and use a pencil to mark to what level you need to shorten them. After that, remove them and cut off all unnecessary, stepping back from the intended level a couple of centimeters down. You need these centimeters to fold the fabric twice and sew. This procedure, how to sew jeans, in the worst case, will take only an hour of your time. But now you can safely save on the studio.