Socks knitting pattern beautiful knitting. Children's socks on knitting needles - diagrams and MK step by step

The times when jacquard patterns, braids and flowers could only be seen on a sweater are long gone. Today they are successfully used in knitting even the simplest clothes - socks. At the same time, you can decorate both the cuffs of the product and the entire canvas. We will talk about how to knit socks with a pattern, and diagrams and descriptions are attached.

Decor options and ways to place it

To knit socks, you do not need to have any special work experience and dexterity, because even children at school in labor lessons, this particular product is among the first. Therefore, it makes no sense to focus on the details. Let's better talk about ornaments, and it is worth noting that there are quite a lot of their options.

Choosing a pattern for knitting, each needlewoman is based on her experience, the availability of materials and the further purpose of the socks. With regard to the last point, two points should be taken into account here:

If you plan to wear knitted socks under shoes in winter, then you need to choose a dense pattern, without small holes and broaches.
When knitted socks are intended to play the role of a decorative element in home clothes, they can be made with thin threads, and an openwork pattern can be chosen.

There are several options for where to tie the ornament:

in the form of a decor cuff;
knit a pattern throughout the product;
in the form of a ribbon of braids, petals and other things in the center of the sock.

Schemes for decorating cuffs are considered the easiest to perform, and even a novice craftswoman can master them. Since the upper part of the sock is a one-piece canvas, there is no need to add loops or make reductions in it, and absolutely all patterns are suitable for decoration. For example, a knitted top with a rollback looks very nice.

The option looks very original, in which the upper part of the sock, starting from the elastic band and ending with the heel, is connected with braids, ribbons or plaits. Due to the peculiar shape of the pattern and the different orientation of the pattern, such socks visually add volume to the leg.

Not inferior in leadership patterns for socks and classic decor techniques. So, ordinary plaits and interlaced braids, made horizontally relative to the cuff, give the finished product charm and charm.

The best solution of all possible is the option of placing the pattern in the center of the sock. You will be able to knit socks without wasting time on dealing with patterns, since often all patterns are presented in the form of longitudinal stripes. You can form a pattern immediately upon completion of work on the elastic band or from the first row of the cuff. How it looks best is up to you. And for inspiration, we offer such an example of a longitudinal ornament.

Even if you have not found a pattern that is right for you, you can depict any ornament in your arsenal on your socks. Review your old knitting patterns for sweaters, hats, jackets, perhaps this is where the very perfect pattern will be found.

High socks with owl pattern

Schemes and descriptions of openwork socks with knitting needles are considered the most difficult to perform. To create such a piece of clothing, you will have to practice a little and get used to changing patterns correctly. In addition, the skills of decreasing, separating and increasing loops will be very useful.

If you decide to knit socks with a pattern all over the canvas, be prepared in advance for the fact that throughout the work you need to carefully monitor the loops and count them correctly. All this is useful so that the drawing does not “move out” outside the selected area, is symmetrical and proportional to the volume. In the master class below is an excellent example of knitting light openwork socks with an Owl pattern.

Necessary materials:

200 g of wool yarn;
knitting needles 2.5 and 2.75 mm;
hook;
pin;
big needle.

Process description:

Openwork socks with knitting needles are as easy to make as standard socks. These lacy and easy-to-make items will not only help to warm the legs, but also bring pleasure to the one who wears them, because the patterned socks look just wonderful. How to connect them? This article will present the best schemes for such work with a step-by-step description.

Openwork socks with knitting needles are as easy to make as standard socks

The openwork gum is very beautiful, it looks interesting and stylish. The patterns of elastic bands can be different, if desired, the master can find any scheme that he likes.

The work consists of the following successive stages:

There are 66 loops on the knitting needle. The first 2 rows are knit face. This rubber band is openwork, so you won’t have to rely on the fact that the product will turn out to be warm.
The toe, back of the work and the foot should be knitted with front stitch. As for the elastic band, it will knit on 15 loops out of 66.
The openwork pattern should be made according to the following scheme: knit 2 loops with the face, 2 - together, yarn over, remove 1 loop, then the front loop is knitted through the just removed one. The second row should be knitted face. The pattern is repeated until the end of knitting gum.
How much do we knit such an elastic band? For standard lace socks, it is enough to tie 16 cm of elastic. This number can be increased or decreased as desired.

Openwork knitting socks for newborns (video)

Openwork knitting socks for a woman: a simple description

One of the easiest ways to create fishnet socks is to knit them in a spiral. These women's socks are very cute.

The work consists of the following stages:

To begin with, materials are selected. You will need yarn and knitting needles. Circular knitting needles are used to knit socks.
Now loops should be cast on 4 knitting needles. The fifth spoke is working. For a medium-sized leg, approximately 25 loops are typed.
First of all, you need to tie an elastic band. If the yarn is large, you can knit 1 by 1, if it is medium or small, then it is better to do 2 by 2.
When a sock is knitted after an elastic band, a spiral circular fabric should be formed, for this, 1 front loop must be made on top of one purl loop, and vice versa.
When more than 10 cm of the product is knitted, it is necessary to try it on without removing it from the working knitting needles. This is necessary to determine the correct knitting density. If the sock sits too loose on the leg or, on the contrary, too tight, it is better to dissolve it and start again, having dialed the required number of loops.
After the product has acquired the length desired by the craftswoman, a decrease should be made for the toe. Decreases are made evenly. In each group of loops, the same number of loops should be reduced for symmetry. It is recommended to use a safety pin so you don't forget where the circle starts.
In such socks there is no heel, this is their feature.

These women's socks are very cute.

Tip: Unfortunately, this pattern can stretch over time. However, this can be prevented, for this, after washing, such work should be twisted in a spiral. They should dry out like this.

Children's openwork socks with knitting needles

Knitting socks for children is especially pleasant. There are a lot of ideas for such openwork works.

Here is one of them:

Children's socks should be made of warm threads so that the child's feet do not freeze. Therefore, preference should be given to either woolen or half-woolen yarn.
This knitting method is called "Ladybug". The yarn used here should be red and black.
Knit should be in 2 threads. After a set of loops, you can start knitting gum. Children's socks should not have too wide an elastic band, so you can do it 1 by 1.
After that, the cuffs are knitted with a red thread. To give it openwork, each front loop should be alternated with a crochet. The second row is knitted on the wrong side. Thus, small holes are obtained.
Next, the heel is tied. To do this, a black thread is added to the work.
Loops get on the edge sides of the knitted heel, and the knitting of the sock continues along the foot. At the sock, you should make the eyes of a ladybug. To do this, several symmetrical double loops are knitted with black thread on the front of the product.
At the end of the work, the sock must be turned inside out and, with the help of a hook, stretch the protruding threads inward.

Knitting socks for children is especially pleasant

Lace pattern on children's socks with knitting needles

Children's products can be knitted as you like. In this case, it is difficult to create a tasteless thing, because children like colorful and bright products. They especially love clothes and shoes that remind them of some animals or cute creatures.

As for openwork patterns, there are a lot of them. A craftswoman can find such patterns in knitting magazines or on the Internet.

Here is one of those patterns:

It is necessary to pick up a yarn of two colors: light blue and white.
The first row is knitted with front stitch. Further, in all circular rows, knitting occurs in the front way.
A pattern will form, so it is important to ensure that yarn of a different color does not lie on the wrong side of the product. To do this, the threads cross on the wrong side.
In order not to go astray and knit the pattern correctly, you can print out the diagram for yourself and put small dots with a pencil in the place where the master is currently “located”. This will help you not get lost.
The heel of the sock should be knitted in blue. In general, it is not recommended to knit the area of the heel and foot of the sock with a light color, since all the pollution is visible on it.

Scheme of work

What will be needed at work?

First of all, you need to prepare materials for knitting.

Among them:

Yarn. You should not save on it, because not only the appearance of the future product, but also the period of wearing it depends on the quality of the threads. The better the threads, the longer the product made from them will serve the owner.

First of all, you need to prepare materials for knitting

What composition is better to choose threads? The answer to this question depends on many factors. For example, if a craftswoman wants to make warm socks, she should not buy acrylic threads, as this is a synthetic material that will not warm her feet. She should give preference to woolen or mohair threads.

Spokes. In this case, special knitting needles for knitting socks should be used. There are 5 of them in the set. It is best to use metal knitting needles.
Hook. It is convenient for them to stretch the threads to the wrong side.
Scissors. They are used at the last stage of work, when you need to stretch the threads inside out.

Those who are knitting fishnet socks for the first time should learn how to make regular socks, not lace ones. This is necessary in order to understand the principle of the work itself.
The most difficult thing in this business is knitting the second sock so that it looks exactly like the first one. For this, it is important to knit them with the same density.
To make the work iridescent and more beautiful, it is worth using several colors of yarn.
To prolong the period of wearing socks and prevent them from rubbing in the heel and foot area, you should use a special thread in knitting the lower part of the sock. It is very thin and serves to ensure that the product is not rubbed when walking.

Openwork knitting socks: master class (video)

Knitting openwork lace socks is an activity that even a beginner can handle. The main thing in this matter is to follow the scheme correctly.

Cute and cute socks are obtained from the pattern of openwork leaves. And the leaves of the tie will give your legs a coquetry and emphasize their beauty.

Description of knitting openwork socks with leaves:

Yarn:

about 260-280 m in 100 gr.

Sock knitting needles

We collect 48 loops on the knitting needles, distribute them on 4 knitting needles and knit in a circle:

1 row - all facial

2nd row - all purl

3 row all - - front behind the back walls

4 row - all purl

5,6,7 front rows

8-purl

9 facial

10- purl

11- facial

Then we make holes for the lace:

12 row - yarn over, knit 2 together and so on until the end of the row

Knit 13 row now needs to be repeated 1 time from rows 1 to 11.

Heel:

Let's move on to knitting the heel:

We knit only on 1 and 2 knitting needles in the front rows, all the front ones, and in the purl 1 purl loop, 1 remove the thread before work.

We continue to knit to a height of 5-7 cm. Then we divide the existing 24 loops as follows - 7,10,7.

Now we continue to knit only the middle 10 loops, and we knit 11 and 12 together (on the front side of the front, on the wrong side - wrong side) until only 10 loops remain on the needle. now you need to raise the side loops (all that are, then decrease to 12 on the knitting needle, but I immediately dial 7 and then do not have to decrease).

We again have all the loops closed in a circle. Knit one row in the round.

We continue knitting to the desired length of the sock, then we make decreases for the toe. On the toe, every second row is knit, 2 missing loops are taken from the heel needles. After knitting the upper part of the sock, first knit the heel, then go to the toe, distributing the loops so that 26 loops go to the toe. Observe only the pattern rapport.

Leaves pattern:

Sample pattern openwork leaves

Description of knitting pattern leaves:

Knit only one rapport.

1st row: 2 out. 12 persons., 2 out., 12 persons.

2nd and all even rows: knit everything, how to look at the loops, purl - purl.

3rd row: * 2 p. out., 8 p. persons., 3 p. together persons., 1 yarn over. 1 p., 1 yarn over, 2 p. out., 1 yarn over, 1 p., 1 yarn over, 3 p. removed loop), 8 p. persons., 2 p. out. *, repeat from * to *;

5th row: * 2 p. out., 6 p. persons., 3 p. together., 1 p. persons., 1 yarn over, 1 p. persons., 1 yarn over. 1 p. persons., 2 p. out., 1 p. persons., 1 yarn over. 1 p. persons., 1 n.akid, 6 p. persons., 2 p. out. *, repeat from * to *;

7th row: * 2 p. out., 4 p. persons., 3 p. together, 2 p. persons., 1 yarn over. 1 p. persons., 1 yarn over, 2 p. persons., 2 p. out., 2 p. persons.. 1 yarn over, 1 p. persons., 2 p. persons., 3 p. together with a tilt to the left ( Remove 1 loop as a front loop, knit 2 loops together with the front one, then stretch it through the removed loop), 4 p. persons., 2 p. out. *, repeat from * to *;

9th row: * 2 p. out., 2 p. persons.. 3 p. together., 3 p. persons.. 1 yarn over. 1 p. persons., 3 p. persons.. 2 p. out., 3 p. persons.. 1 yarn over. 1 p. persons., 1 yarn over, 3 p. persons., 3 p. together with a tilt to the left (remove 1 loop as a facial one, knit 2 loops together with the front one, then stretch it through the removed loop), 2 p. out *, repeat from to *;

11th row: * 2p. out., 3 p. together., 4 p. persons., 1 yarn over. 1 p. persons .. 1 yarn over, 4 p. persons., 2 p. out., 4 p. persons., 1 yarn over, 1 p. persons., 4 p. persons., 3 p. together with a tilt to the left ( Remove 1 loop as a front loop, knit 2 loops together with the front one, then stretch it through the removed loop), 2p. out. *, repeat from * to 8;

12th, 13th and 17th rows: * 2 p. 12 p. persons. 2 p. out, 12 p. persons., 2 p. out. *, repeat from * to *.

Leaf tie:

The leaf is knitted in a circle on 3 stocking needles, so it turns out to be double-sided, hollow inside. The lace is knitted on two needles.

Cord:

For knitting, two stocking needles are needed, in which both ends are working. Cast on 3 loops and knit them with facial loops. Then move the work to the other end of the knitting needle without turning the work, *stretch the working thread from behind and knit 3 front loops, move the knitting again, repeat from * until the desired length is reached.

Without completing the knitting of the cord, add 3 loops in the following way:

There are now 6 stitches on the needle.
Distribute loops on 2 knitting needles, 3 loops each.

Leaf:

The leaf is knitted in a circle around two knitting needles.
Row 1: On the first needle, knit 1, yarn over, knit 1, yarn over, knit 1. - repeat the same on the 2nd knitting needle. (5 sts on each needle).
Row 2: All knit
Row 3: K2, yarn over, knit 1, yarn over, knit 2. on the first spoke. Repeat the same on the 2nd needle. (7 sts on each needle).
Row 4: All knit
Row 5: K3, yarn over, knit 1, yarn over, knit 3, repeat on 2nd needle. (9 sts on each needle)
Row 6-9: All knit
Row 10: Knit 2tog with a tilt to the left, k5, knit 2tog, repeat on the 2nd needle. (7 sts on each needle).
Row 11: All knit
Row 12: Knit 2tog with a tilt to the left, k3, knit 2tog, repeat on the 2nd needle. (5 sts on each needle)
Row 13: All knit
Row 14: Knit 2tog left, knit 1, knit 2tog (3 sts on each needle)
Row 15: All knit
Row 16: Slip 2 sts as in knitting from bottom to top, k1, pull it through 2 slipped sts - repeat on 2nd needle.
Cut the yarn and pull through the remaining two loops, fasten and hide the tail.

Socks are a traditional affordable item of clothing that you can make yourself by knitting them with knitting needles. It would seem, how can you decorate knitted socks so that they are the most beautiful? There are many options - these are classic braids, and the presence of openwork jacquard patterns of different configurations, not only for adults, but also for children. Consider below the original schemes and master the knitting of socks with knitting needles beautiful patterns. Let's make sure that they can be used not only in a dress fabric or when making a sweater.

Knitting socks with knitting needles - a few suitable patterns

Today, socks can be decorated with any patterns you like, sew on a balabonka, symmetrically divide the color scheme, and also apply other ideas, including your own imagination, or by watching a video on the Internet. As a result, needlewomen get warm original socks with an element of openwork or other decors.

When knitting socks with knitting needles, it is possible to use different patterns. To date, their presence on the Internet is large and there can be no problems with this. The most beautiful patterns and patterns are provided below. The main thing is to learn how to properly knit the main elements of this item - heels and toes. So, in order to knit the warmest and most beautiful socks, you need to start from your own skill, choose the right yarn, purpose and appearance of the future thing.

If you plan to knit socks for children who are intended to perform the function of heating their feet, then the best option would be thick yarn and a knocked down ornament. A decorative model will be made from thinner yarn, using an openwork print or voluminous decoration (pompoms, ruffles, appliqués). See diagrams and videos below:

Jacquard ornaments - beautiful patterns

Jacquard is considered a classic, which is certainly in demand in the winter. But knitting them is a bit related to options with particularly complex ideas:

you have to work simultaneously with threads of different colors;
you need to learn how to change them in a timely manner;
create the correct thread tension;
observe the required tightness of knitting.

The optimal solution in the arrangement of jacquard motifs is stripes with patterns. They can be placed on the cuffs and on that section of the sock, which is intended for decoration of this place.

To knit openwork socks for children, which are completely covered with a colored pattern, it is necessary to alternately repeat the selected pattern, and so on, until the thing is completely ready.

It is possible to alternate the ornament with several rows connected only with facial loops, a single-color thread or other simple patterns. Schemes of original ornaments are shown in the photo below:

Knitting socks with knitting needles - options for placing a pattern in the canvas of a sock

There are some options for the distribution of the pattern on the knitted sock, their difference is in the complexity and speed of the work. Thanks to them, needlewomen create many incredibly beautiful models, including openwork ones:

ornaments occupying the entire panel;
cuff patterns;
ornaments for children in the form of elongated stripes.

When knitting socks with knitting needles, the main thing is to choose the right pattern and the most beautiful patterns. Beginner knitters will do better with simple patterns that illustrate elements with a narrow longitudinal report. The vertical pattern will succinctly fit it into the canvas of the sock itself. The report, which is staggered, is more complex, and often the craftswomen get confused, counting the loops where the heel begins to knit. This option can be used when decorating an even cuff when knitting socks for children. So, we examined the topic: “Knitting socks with knitting needles, beautiful patterns” and a training video, now you can try to master this type of needlework on your own using a simple example.

Socks are often knitted quickly and, admittedly, rather boring. The situation is saved by creative ways to create interesting, bright and extraordinary products. Especially when it comes to knitting for children, teenagers and just fun people. Their accessories may have unusual shapes, patterns or colors, such as colorful rainbow stripes, a Superman or Batman emblem, a funny jacquard pattern. It also looks very nice (and knits with delight) long socks with an openwork pattern or socks with a knitting pattern (a variety of patterns can be used here) is not particularly difficult.

Yarn selection

For manufacturing, you will need yarn, which includes wool, mohair or angora (minimum 30%). Knitting from 100% acrylic is not worth it, since it does not provide useful heat. But it creates a greenhouse effect, which is not very good for the legs. Thread thickness may vary. Its choice depends on the purpose of the product and the requirements for its appearance. Knitting socks with a pattern on needles (patterns are usually designed for medium weight yarn) is a good way to create beautiful and practical things for women, men and children.

Warm socks can be made from yarn, the thickness of which is 200-300 m / 100 grams. Too thick a thread should not be used, since such a sock is unlikely to fit in shoes, and it will be difficult to form a pattern. Very warm and light products are obtained from a thin (400-500 m / 100 grams) woolen thread. Their only drawback is rapid wear. However, this problem can also be solved by using an additional strong thread when knitting the heel and toe. For the manufacture of high fishnet socks and golf, fine wool, angora, cotton, viscose or linen are used.

Pattern placement

Based on the experience of the knitter and the purpose of the product, the pattern can be arranged in several ways:

On the pagole.
On the front of the sock (along).
on the entire surface of the product.

It is most convenient to knit an ornament on a flat circular cloth of a pagolenka. There are no additions here, and there is no need to compare the pattern with complex details with a toe). However, this approach provides a rather limited space for the manifestation of the craftswoman's imagination. No less common is the variant with the formation of a long stripe of a pattern that runs along the entire front of the sock. It is also convenient because of the clear geometric shape of the ornament. Manipulations with shortening the loops and knitting the heel do not distract from the knitting of the pattern and do not lead to the formation of errors.

Knitting socks with a pattern with knitting needles (patterns can be different) with an ornament on the entire surface of the fabric allows you to get very beautiful products, but this process is quite complicated. For the successful implementation of the project, one cannot do without attentiveness, diligence and accurate calculations.

What patterns are suitable for knitting men's socks

Many ornaments with small rapports can be used to make socks. Of course, the specifics of the product and the location of the decoration should be taken into account. For example, knitting men's socks with knitting needles with a pattern (it is better to choose simpler patterns) should not include any openwork and overly sophisticated braids. If you want to please your loved one, it is quite enough to knit an ornament from several longitudinal stripes, as in the photo above.

A few words about jacquards

Making socks for children is the exact opposite direction. Here, bright colors of yarn, colorful patterns, braids, embroidery, jacquards and all the other handmade charms are very appropriate. Jacquard with a pattern (children's patterns are not so difficult to find) can be a topic for a separate article, as this is an extremely voluminous and rather complex work.

In a nutshell, its features can be described as follows:

The diagram above shows an example of a good jacquard pattern. With seeming simplicity, it has clear contours, an excellent plot and versatility.

Knitting socks with a knitting pattern: patterns for female models

There is nothing more impressive than socks made of quality yarn with voluminous braids. This is the epitome of coziness and comfort. However, models with an openwork fabric also deserve attention. Their purpose is more decorative than practical, but when using a very warm thread, even openwork can warm. In any case, any model turns out to be unique if the craftswoman loves and practices knitting.

Socks with a pattern (diagrams, a description and an example of the location of the pattern are below) can be made as follows. For such a model, any solid patterns are suitable, including basic knitting techniques.

The ornaments in the diagrams consist of simple front and back loops and their combinations. To add volume to the vertical braids in the second pattern, their front loops are knitted together with the loops of the previous row. The third pattern is equipped with vertical flagella, consisting of two interlaced loops.

The patterns below for knitting socks with knitting needles with patterns differ in that each of them uses weaving loops.

How to work with a pattern

To get socks with a successful placement of the ornament, you should make the right calculations. After the control sample is ready according to the pattern pattern, knitted from the selected yarn, it will be possible to count how many loops and rows will be required to form a rapport. This information is important, first of all, because the fabric of the sock is knitted in the round. Therefore, it must consist of a whole number of rapports.

If the rapports are small, it will be easier to adjust their number to fit. When using a large pattern, the best way out is to place one or two rapports in the center of the canvas.