DIY flower ribbon bow. How to make a bow from a satin ribbon with your own hands with photos and videos. DIY gift bows from satin ribbons

Posted On 02.11.2017

Ready-made jewelry for a gift or beautiful packaging tapes are not always at hand. What if you want to make gift wrapping beautiful? Make a bow yourself from improvised materials, namely from paper. How to make a paper bow with which you can decorate a gift? It just takes a little patience and effort.

Curly hair can be not only on the crown

Do original cascade of curls you can, having acquired plain paper, preferably very thin. We cut a sheet of paper into thin strips, up to 1-1.5 cm, and then with the blunt side of the scissors we give them the shape of curls, drawing along one of the sides of the paper. Curls form instantly. For this purpose, you can use ordinary wrapping paper. Having made the required number of curls, we fasten them with a stapler and attach them to the gift, gluing or similarly fixing them. Curls can be located both along the perimeter of the box and fall from the central part.

How to make a paper butterfly

To make a butterfly bow, you will need two types of paper. One is denser and brighter (it can be a photograph from a magazine), the second should be one and a half to two times smaller and depict the body of a butterfly. We make the most ordinary fan from a larger sheet. From a small one, we similarly make a fan, trying to make the folds the same. The fan is divided into three parts and slightly cut on the right and left sides, retreating from the edge by 2-5 cm (depending on the size of the sheet). We impose a smaller sheet on a larger sheet: in such a way that the folds coincide and in the central part we press and tie the two parts together. Carefully straighten, giving a magnificent shape - and the butterfly is ready. To make the product more catchy, it makes sense to use old magazines with pictures, fashion catalogs and others that have bright colors on paper.

Bow Dior

An unusual bow can be made by preparing four rings of decreasing diameter. The smallest should be such that it takes up no more than 50% of the width of the last ring. The rings must be slightly overlapped, the upper and lower central parts should be glued in the same way. The rings also need to be glued, laying one in the middle of the second, and connected across the perpendicular with a narrow paper tape, thus obtaining an original decoration. The tape is taken in one color, but to give some contrast, it is worth taking a transverse paper piece of a different shade.

As for the Dior bow, you can connect its two halves together, getting a more lush and voluminous inflorescence. It will look very beautiful and unusual.

Original paper chrysanthemum

To get an original and lush chrysanthemum, you need to take paper of a bright or light color (for example, pink or bright red) and cut out ten to fifteen polygons. They should be in the form of hexagons or be similar to flags, but so that everything is fastened together. We stack the cut out figures on top of each other and stab them on top with a pin or a needle with a tip, the top of which can be shaped like a pestle by pushing a white or yellowish cap. It turns out gorgeous paper flower.

Combinations with paper ribbons and curls

Can be done quickly and easily original decoration with curls. We cut out four strips of paper in the form of thin and long ribbons, the ends of which we give an unusual shape, for example, like a flag, in the form of the letter “V”. We put two ribbons side by side on a box or a package with a gift (with a small interval), cover them on top in the same way with two of the same ribbons and glue them at the junction. On top of the glued tapes, we attach other pieces of paper, similar in width, placing them perpendicularly. There will be four sections in total. We draw the blunt edge of the scissors along the last attached pieces of paper tapes, giving them the shape of a curl. Everything: the decoration is ready.

In the same way, you can experiment with the color of ribbons, using, for example, white and scarlet pieces of paper, creating compositions from thin and thick curlicue rings. Or by putting such curls into rings of a larger diameter.

How to make a simple and original bow?

A beautiful multi-colored paper bow is obtained by taking eight pieces of paper of three shades of the same length but different widths. Colors can be taken as follows, for example: the widest stripe is blue, the narrower one is purple, and the top one is pale pink. Glue the strips of paper on top of each other. We bend the edges of the strips in the form of an envelope, connect them together and form two inflorescences in the form of a trefoil. We connect them together. In the central part of the decoration we attach thin bows. They should be done like this: cut very thin strips as thick as a straw, which should be glued into a ring and then additionally connected in the center, getting a thin bow.

To the resulting decoration, you can glue a thicker ring on top of thin bows, which will crown the central part. From below, you can attach two ribbons, from the wrong side.

Most importantly, when creating paper jewelry, don't be afraid to experiment. After all, you can create compositions by unusually combining curls, ribbons, diamonds and irregular polygons, bows and fans. The main task of such jewelry is to add a certain zest to the presented gift, interior, and even fancy dress. A little strength and patience - and everything will work out!

How to make (tie) a gift bow (bows) from ribbons

DIY satin ribbon bow for decoration

DIY satin ribbon bow for a gift

How to make a beautiful bow DIY gift

How beautiful to tie a bow. classic bow

HOW TO TIE A BOW master class, diagrams with photos

DIY two-tone ribbon bow. simple, strict and

Home Hobby

Is it hard to imagine a solemn moment without decorating or decorating with elegant bows? Lush and strict, elegant and frivolous - they create a special mood at the holiday. Making a hairpin or a bow tie for an evening dress from satin ribbons is not difficult if you follow the instructions.

How to make bows from satin ribbons

Jewelry assembly technology requires ribbons of different colors, special widths according to your idea. You will need a minimum set of tools and materials for manufacturing. In the case of passing the master class, you will not have a question about how to make a bow from a satin ribbon. The proposed step-by-step instructions will turn the work process into a pleasant and understandable one.

How to tie a ribbon bow

You will need:

lighter;
scissors;
threads;
needle;
ruler;
glue or heat gun.

Depending on the purpose of the bow, there are various options for manufacturing technologies. He can be:

small, made using a fork - suitable for decorating a postcard;
magnificent, elegant - in the style of kanzashi - for a holiday in kindergarten;
a strict bow tie - for an important banquet;
double - for decorating hair, attached to a headband or hairpin,
solemn - on a gift box.

Satin bows can be made in the form of an original flower. If you choose the right color and shape, they will become unique decorations:

elegant evening dress
frivolous sundress;
styled hair;
in the form of a bracelet on the hand;
stylish handbag;
bridesmaid dresses;
elegant blouse;
as a pendant around the neck;
furniture in the interior;
stylish prom dress
curtains in the apartment.

How to make a classic satin ribbon bow

The most popular and simple, this bow is used to decorate clothes and interiors. Even a modest gift, decorated in this way, becomes elegant, solemn and attractive. To tie a bow you will need:

take a workpiece 20 cm long;
burn the edges
fold in half with the smooth side inward;
bend the edges outward again;
pick up, so that each has a loop at the top, and a bend between them at the bottom;
cross the folded parts in front, forming a ring under them;
pass one loop through it, tie.

Strict beautiful do-it-yourself satin ribbon bow

You can tie a strict stylish bow for a special occasion. It will decorate a lady's bag, dress or gift. Here it is important to choose the right colors for crafts so that it looks elegant. How to make a bow from a satin ribbon, for example, such as in the photo. Prepare scissors, glue, material of three colors for work. You should:

take a blank 30 mm wide with a length of 18 cm;
roll into a ring;
connect the edges with glue.

The next steps to assemble the decoration are:

fold the ring so that the seam remains at the bottom in the middle;
iron;
take a ribbon of a different color of the same width, with a length of 7 cm;
wrap a ring around the workpiece across;
fix with glue;
prepare a tape of a contrasting color of the same length, but thin;
wrap around, in the middle of the previous ring;
seal;
iron.

Two-tone beautiful bow from a satin ribbon with your own hands

A stylish and very elegant decoration can be assembled from blanks of two colors. Ease of manufacture does not mean that it will look modest. Elegant and spectacular, it will decorate the hairstyle and the original dress. You will need a wide and narrow blank. To make jewelry:

measure 2 pieces 15 cm long - one narrow, the other wide, cut off;
put one on top of the other;
roll into a ring;
fix the joint with glue;
iron;
tie a bow in the middle with a narrow ribbon, closing the junction, forming a knot;
cut off the ends;
glue.

DIY gift bows from satin ribbons

An anniversary or birthday gift box will look much more impressive if you decorate it with a bow. It can be, depending on the situation, small, elegant or voluminous and lush, for example, like this. It is very easy to tie it - you can quickly learn, even without a master class, following the instructions:

take a workpiece two meters long;
wrap it around the open palm of your left hand;
remove carefully;
leave the end free.

on a workpiece folded in several layers, cut off both corners on one side, by about 5 mm;
burn it so that it does not bloom;
repeat operations on the other side;
fold the workpiece so that the cut parts are aligned in the middle;
tie with the free end of the ribbon;
straighten each petal, giving it volume.

A lush bow made by yourself can please a young beauty if it is woven into her hair or becomes a decoration for a gift box. For its manufacture, you will need 6 blanks 12 cm long, 5 cm wide, the same number 11 cm long and 30 mm wide. First, they need to be burned around the edges. You will also need elegant thin braid, small beads and a piece of felt. Next, you need to do this:

take wide blanks;
fold in half;
sequentially collect on one thread;
pull, fasten;
repeat the process for narrow ribbons;
cut a circle with a diameter of 40 mm from felt;
stick a large blank on it;
take pieces of thin braid 12 cm long - 6 pieces;
fold each into a ring;
glue on the front side by laying on the petals;
fix the workpiece from a narrow ribbon on top;
pour glue, approximately 10 mm in diameter, onto a piece of fabric;
lay the beads on it tightly in a circle;
cut in a circle;
glue the decor in the middle of the decoration.

If you want to decorate your holiday card with a tiny bow, try using a fork. The process will go like this:

take a fork in your left hand;
loop a ribbon over it so that the edges remain on the right;
throw the far end behind the fork through the lower one in front;
insert it in the middle between the teeth and bring it back;
enter the remaining tip of the ribbon on the right into the same gap, but from above;
turn the plug over and tie both ends with two knots;
remove the bow;
cut the ends, singe.

DIY openwork satin bow

Do you want to learn how to wrap gifts like at Dior? The technology will not cause difficulties, and the view will be unusual and original. For manufacturing, you need satin blanks 25, 20, 16 and 10 cm long. To make such an ornament:

burn the edges of the ribbons;
roll the longest into a ring;
glue the ends;
repeat operations with other blanks;
stack all the rings on top of each other, starting with the larger one, place the glued sections from below;
pass an additional ribbon on top of the rings (as an option, it can pass inside the small element);
fasten on the back.

If the process of making jewelry according to the attached instructions seems complicated to you, watch the video tutorials.

You will understand how to make a flower bow with your own hands without special tools, learn how to collect decorations for gift boxes, learn how to tie a voluminous two-color accessory for a hairpin for a holiday, understand that making bows yourself is a simple and exciting process. Needlework will help you look original and unique, make your image attractive and stylish.

How to make a beautiful satin ribbon bow in the shape of a flower

Ribbon gift bow

How to tie a beautiful satin ribbon bow

Festive Headband/How to Make Beautiful Kanzashi Headband

How to make a beautiful bow from a satin ribbon with your own hands

How to make a large, fluffy and beautiful ribbon bow on

How to make a bow from a satin ribbon with your own hands with a photo

Bow - Masters of Needlework

Animation congratulatory bouquet GIF pictures

Gratitude - Pictures of animation and verses. Good time of the year!

Knitting is your hobby. Appendix 1 2018. Knitting magazine

Curtain design for the bedroom: 50 photos of the best design solutions

Vest in five minutes from Olga Nikishicheva. Good morning

How to make a canopy over a well

Trepang at home

How to finish the edges

To make the ends look neat and not crumble, they should be processed. First, cut them with sharp scissors at an angle of 45 degrees. On openwork designs, a V-shape in the form of a dovetail looks great.

Then take a lighter or match and singe the edges, keeping the fire at a distance of a centimeter from the fabric.

How to make a bow from a satin ribbon with your own hands

This method is ideal for any synthetic materials.

The easiest way is to cover the ends with PVA glue. This method does not look very aesthetically pleasing, so it is only suitable for designs in which the tips will be hidden under the folds.

Classical

The gift box will be decorated with a classic do-it-yourself ribbon bow, a simple step-by-step master class will help you make it in just 5 minutes:

Lay the ribbon face down on the table and cross the ends in the middle so that a loop forms on each side.
Lay the formed loops on top of each other crosswise.
Wrap the left loop around the right loop, then pass it through the center loop formed and tighten the bow.

From thin and airy fabrics, the product will turn out to be lifeless and sluggish in appearance, so use dense satin, rep or crepe satin for its manufacture.

Bicolor

An unusual two- or three-color bow will be a wonderful decoration for a hair clip or hair hoop. You will need stripes of different colors, and each new one should be narrower than the previous one.

Lay out two stripes of contrasting colors on the work surface so that the narrow one is on top.
Roll the workpiece into a ring and fasten it with glue.
Iron the workpiece with an iron through a sheet of thick paper.
Bandage the middle and straighten the edges.

You can combine more colors with each other, the main thing is to select stripes of different widths in order to demonstrate all the color layers of the product.

Extravagant

A large lush bow made of satin ribbons, made by yourself, will decorate a hoop, hairpin or headdress. For this master class, you will need 115 centimeters of wide tape and a piece of thin wire.

Measure 20 centimeters from the edge and make the first loop, holding its base between your fingers.
Wielding the long end, make a similar loop next to the first.
Then make another loop, but on the opposite side.
Continue to form the structure, alternating loops on different sides. As a result, you should get a blank in the shape of a butterfly.
A piece of wire should be wrapped around the center of the workpiece and cut off the excess with scissors.
Take a short strip of fabric in a contrasting color and wrap it around the center of the piece to mask the wire.
Straighten the loops and give the product a rounded shape so that it looks like a lush flower.

Organza, satin or silk is suitable as a material for this master class. The airy structure can be additionally decorated with a decorative cord or a beautiful plastic brooch can be glued to the center.

Openwork

How to make an elegant openwork ribbon bow with your own hands? Very simple, you just need to prepare two meters of satin, a glue gun and transparent tape in advance.

Take a box decorated with wrapping paper and wrap the tape around it, after smearing it with glue.
Two long ends should remain on the lid of the box, take one of them and twist a large loop, gluing its edge to the center of the lid.
Then the loop must be assembled, making several smaller loops out of its folds and fixing their bases with glue.
Then repeat the same with the other end.

Remember that the volume of the future product depends on the number of small loops. To make the design more voluminous, make the loops as small as possible.

Lush

For curvy shapes, it is better to use rigid materials that hold their shape well, such as velvet. To clearly see how to make an elegant ribbon bow with your own hands, use the instructional video with a visual master class.

Take a long ribbon and wrap it around your palm a few times.
Trim the corners of the workpiece from each edge.
Dissolve the workpiece and twist the same number of turns again, but so that the cut corners are in the middle.
Bandage the middle and begin to carefully pull out each turn and straighten the petals, twisting them along the axis.

Now the decoration remains only to fluff up and attach to the gift using double-sided tape.

On the basis of classical techniques, you can make designer bows, complementing them with beads, sequins or perforations, and use them to decorate handmade candles or hairstyles for September 1 - the scope for imagination is limitless. Do not be afraid to experiment with materials and colors, an original color scheme or an unusual fabric will only decorate the product, making it unique and exclusive.

Little tricks in the arsenal of every housewife are designed to greatly facilitate and decorate our lives. In this article we will talk about an important accessory for a festive mood. How to make a ribbon bow and beautifully decorate a gift or the interior of your home with it - all the information is given below.

How to make a bow out of paper or ribbon

You can make beautiful bows from different materials, but paper and various ribbons are considered the most popular. Let's take a look at the most popular manufacturing methods from these materials below.

paper technology

Graceful and unusual "jagged" decorations will appeal to anyone, and if you master the technique of execution, you can make such a miracle yourself.

For manufacturing it is necessary to prepare:

paper of sufficient density (old posters are perfect);
scissors;
glue or stationery stapler;
ruler.

How to make a paper bow:

Cut strips of paper of the same thickness.
Using a ruler, measure pieces of different lengths.
Roll each piece at an angle without deforming the paper.
Fasten two pieces together to make a kind of "eight".
In total, three large and medium "eights" are needed, as well as two small ones.
Make the last figure simply in the form of a circle.
Starting from the longest "eights", lay out three pieces in the form of a circle, then fasten them in the middle.
The average length of the "eight" is also fixed in the form of a circle.
Lay out the middle “circle” on a large figure so that the teeth fall in a checkerboard pattern.
The remaining two “eights” of small size are fixed crosswise and set on top of the resulting figure.
The “top” of our bow will be a paper circle laid on its side.

To illustrate the process of assembling a paper bow, there is a photograph illustrating the process in an accessible way.

An original and very delicate bow is obtained in a different way. To do this, it is enough to cut out curly parts from colored paper (it is better to do this according to a template) and fasten them together, as shown in the photo. For variety, you can use several colors, as well as paper with drawings. Having shown due ingenuity, you can independently come up with new figures for an exclusive model.

Ribbon manufacturing technology

The most suitable material for creating such a decor are ready-made tapes, the range of which is constantly increasing.

There are many types, the most common of them: satin, guipure, silk and translucent organza.

At the same time, you should also take into account the huge selection of colors, shiny varieties and the ability to choose stripes with a pattern. In general, there is room for fantasies to roam, the choice of suitable products will depend solely on your aesthetic taste, but we will tell you how to make a ribbon bow with your own hands.

Manufacturing technology can be conditionally divided into stages of complexity. Having successfully mastered one option, you can complicate the task a little and proceed to the next.

A simple DIY satin ribbon bow

To do this, a strip of sufficient length is taken, and the principle of the knot itself is shown in the photo.

To make the knot neater, you can use the following master class on how to tie a bow from a satin ribbon. At first, this method will seem too complicated, but with due diligence and training, everything will turn out purely mechanically.

Several options for ribbon bows

To create such a decor, it will be enough to choose stripes of different thicknesses and colors. A monochromatic bow will lose significantly in aesthetic terms, so it’s better to choose a more interesting option.

To make such a bow, three strips of different lengths should be cut off, combined with each other and pulled together with a smaller segment. The edges can be made jagged, as well as simply tucked - this will add volume to the product.

The second option will be no less pretty, as well as easy to perform.

Gift Bow - Simple Recipes

To do this, circles are formed from suitable strips of different widths, but of the same diameter. Having attached the tapes to each other, the middle is fixed with another segment. The resulting decor can be used not only to create hair ornaments, but also all kinds of ideas, a list of which you will find below.

How to tie a bow on a fork

You can try to use improvised means. A simple and very attractive way to beautifully tie a ribbon bow is presented by an original method using an ordinary table fork.

The step-by-step instructions in the picture will help you master this technique; for convenience, the ends of the tape are signed with letters.

Such decorations are extremely attractive and suitable, for example, for decorating clothes. With their help, you can even color a nondescript turtleneck with new colors.

You can complicate the process a little and make two-tier bows from ribbons with your own hands. Decorate the central part with a bead, and additionally make an organza base from below. An example of such a creative is shown in the photo as a sample, so be inspired for your own projects.

Step-by-step instructions for making

A simple technique for making bows on a fork can be slightly modified. For this, a step-by-step instruction for a do-it-yourself ribbon bow and corresponding illustrations are presented.

How to tie a ribbon bow on a fork:

Push the tape - fasteners between the middle teeth of the fork.
Skip the main tape alternately between the teeth in a checkerboard pattern.
Fix the beginning of the strip in your hand, the rows alternate to the very top. The more there are, the more magnificent the product will turn out.
Tie the resulting loops with a fastener tape, cut off the ends and scorch a little with fire so that they do not bloom.
Alternation of stripes of different colors, sizes and surface textures.
Use of ribbons with a pattern.
Threading will make the figure more voluminous.

Various variations:

The main improvement may concern the dimensions of the product.

Large satin ribbon bows can be made using a suitable size cardboard template or your own fingers.

Options for decorating flower bouquets

Bouquets are fastened with similar decorations, and you can make bows from paper and fabric ribbons. Both options are quite nice, and brief diagrams will show how you can complete such a decor as quickly as possible.

Do you want something interesting?

Option number 1:

Wrap the tape around the palm of your hand or any suitable object.
Trim the ends of the edges for a more comfortable fit.
Align the cut parts to each other (now they will be in the middle of the tape).
Fix and straighten the "petals".
The more turns there are, the more magnificent the bow will turn out.
Fix in the middle.
"Fluff" the coils of the tape.

Option #2:

Fold the tape several times with a “figure eight”.
Fix in the middle.
"Fluff" the coils of the tape.
Trim the ends neatly and the bow is ready.

Option #3:

Fold the bow according to the principle of the first option.
Make cuts along the edges of the fixed tape.
Fluffy bow will have a more voluminous and interesting look.

Option #4:

The tape is twisted at the attachment points.
"Petals" are formed right in the hand. Thus, you can control the volume of the bow, which is very convenient for decoration. You can make the ends of different sizes.
After the desired size and type of product have been achieved, secure in the middle with the end of the tape.

Do-it-yourself original bows from satin ribbons can be made using the following technology:

Wind a satin ribbon between two fixed knitting needles.
Lay a line in the middle.
Remove the ribbons and pick up the thread.
Fix the thread, cut the ends - the bow is ready.

American design options

American bows got their name not entirely deservedly, because similar patterns can be found in various countries. The main requirement when decorating such a decor is to show imagination. The creation of such a decor is based on the use of several varieties of products at once, so there will be a lot of options. This type can be called a traditional option; our master class will describe in detail its creation.

How to make an American-style satin ribbon bow:

"Eights" are formed from a thin ribbon.
Separate parts in two or three pieces are fastened together.
From below, you can make a base of several straight ribbons fastened in the middle.
For additional decoration, you can make the edges jagged.
Fasten the two parts together, you can glue a bead or a simple smaller bow on top.

Individual elements can be seen in the photo.

The end result should be something like this.

For children's hairpins, it is better to take a more durable rep tape. Now they sell products of interesting design, for example, favorite cartoon characters.

What can be decorated with homemade bows:

Decoration of clothes, belts and shoes.
Sofa cushions.
Cutlery before serving to guests.
Napkins, towels and kitchen curtains.
Newborn envelope.
Cases for bottles of champagne.
Wedding glasses, cars, ribbons of witnesses and other holiday attributes.
Hair ornaments.

Decorating the Christmas tree with bows is gaining more and more popularity. You can buy ready-made ones without problems in any suitable store, but it will be much more interesting to make such an ornament yourself, especially if children help you with this. It will also be a great gift idea for your loved ones for the holidays.

New Year's bows on the Christmas tree

A simple and incredibly attractive decor will come from the tips below. To make bows for the Christmas tree, you will need a variety of materials: paper, felt, organza, and even lace. Several successful examples are given in our article, they can be used as a model for independent inventions.

DIY bows for the Christmas tree made of felt

This unique material is highly demanded in needlework. Its main advantage is a dense "plush" structure, the edges of which will not crumble, which means that they do not need additional processing.

A simple bow for a Christmas tree is made approximately as shown in the photo. At the same time, the upper part can be additionally decorated with beads, beads and just a bright ribbon of a contrasting shade.

You can make rounded edges, you get a completely different model.

A more complex model of such a decor needs a detailed description, the whole process is clearly shown in the photo.

New Year's decor with your own hands:

Felt cut into strips of arbitrary thickness.
Fold the strip in half and sew the edge of the fabric with small stitches.
Cut the fold points at regular intervals, without reaching the edge.
Gather the thread carefully to make a circle.
Trim and fix the edge.
Decorate the top as you wish.

How to make a ribbon bow for a Christmas tree

The above options are perfect for New Year's decor, especially since you can pick up ribbons with the appropriate pattern. Red is traditionally used, but if you do not have specific color preferences, you can choose multi-colored options.

In order to understand how to tie a bow from a ribbon, just look at the above photo. With some skill, such decorations can be done quickly enough.

With beautiful spirals, you can not only decorate a Christmas tree bow from a ribbon, but also use the idea to create hair ornaments.

Technology for the execution of spiral elements:

Wrap satin ribbon on wooden skewers.
Secure the edges with pins.
Put in the oven at about 180º C for five minutes.
After cooling, the tapes will acquire beautiful and uniform bends.

Original decoration from tulle

The unusual look of this tulle bow can also be used to create New Year's decor. To do this, you need to take an organza or cut off a small strip of tulle. The algorithm of actions is shown in the photo and resembles the process of creating pompoms.

There are enough examples of use, ranging from gift wrapping to curtain decoration. We have considered the most successful options for creating bows in our article, but the final result and possible variations will depend solely on your imagination.

Correct calculation of loops for knitting

How to clean sheepskin on a sheepskin coat at home

happy birthday poster for mom

Candies inside the flower with their own hands

Knitting a border with a description

The range of satin ribbons is striking in its diversity. Ribbons have different widths, colors, patterns, finishes. This material is affordable and easy to use, while you can make very beautiful products from satin ribbons with your own hands. In this article, we offer several master classes on creating simple bows for every day, as well as elegant, festive bows.

Consider, first, the simplest ways to tie a bow. Although, at first glance, it seems that tying a regular bow is very easy, there are still some tricks in this process. We will consider a method that will allow you to get an even, symmetrical bow with a beautiful center. To do this, you only need a satin ribbon and scissors.

1. We take a piece of tape of the desired length.

2. Fold the tape as shown in the figure.

3. In the resulting loop below, we skip one of the ears and tighten the knot.

4. This is what should happen.

This simple bow is perfect for decorating hair for every day.

How to make a beautiful satin ribbon bow?

For example, to diversify a regular ponytail or spikelet with a bright ribbon.

Satin ribbon bow flower. How to do it yourself?

And now consider the festive options for satin bows. Making them will be a little more difficult, but the result is noticeably more effective. Lush bows for hairstyles from satin ribbons can be easily made by yourself. At the same time, the cost of the product is several times less than the price of a store bow. The diameter of the finished product will be 14 cm, if you want to get products of a larger or smaller diameter, then proportionally change the size of the tape segments.

So, to make such a satin bow with your own hands, you need:

Six cuts:

Satin ribbon 5 cm wide, 14 cm long;

Tapes 2.5 cm wide, 10.5 cm long;

Silver ribbon 0.3 cm wide, 15 cm long;

Silver ribbon 0.3 cm wide, 8 cm long;

A circle of felt with a diameter of 5.5-6 cm;

Decoration for the middle of the bow;

Threads in tone, needle, scissors;

Lighter or soldering iron, glue gun or moment-crystal glue;

Elastic band, hairpin or clip for the base.

Before assembling the bow, be sure to process the edges of the cut pieces with a lighter so that they do not crumble during work. Fold 6 five-centimeter pieces in half and collect them on a double thread, pull the thread so that you get a flower and fasten.

In the same way, make a second flower from pieces of ribbon 2.5 cm wide. Then make ears from pieces of silver ribbon, as shown in the figure. Glue the ends with glue or a glue gun.

On the large flower, glue large silver ears, one per petal, so that they peek out nicely from under the top flower.

Glue the second flower on top and, on it, smaller ears according to the same principle. Close the core with the prepared decoration. A bead, a button, a medallion will do.

On the reverse side, glue a felt circle to the bow, and attach an elastic band to it, for example. If you will use a clip or hairpin, then pre-paste them with rep tape to match.

Your bow is ready. It took less than an hour to make an elegant satin bow with your own hands.

Lush satin ribbon bow decorated with rhinestones

We will teach you how to make this wonderful decoration with your own hands in a master class. This version of an elegant bow, which you can make yourself, will delight any first grader. An elegant unusual bow is made very simply, but it will take more time to complete it, since it consists of a large number of details. Please note that you need to carefully complete each blank, since the overall appearance of the bow depends on how well each element is made. If you do not have the skill to work with satin ribbons, prepare materials for 5-7 extra blanks.

Materials for work:

Tape 2.5 cm wide and 6 meters long;

Rhinestones or beads with a diameter of half a hundred meters;

Lighter or soldering iron, scissors, moment-crystal glue, ruler, pencil;

A circle of felt with a diameter of 5 cm, fastening - an elastic band or a hairpin.

We cut about 50 pieces of tape eleven centimeters long, process the edges of the pieces with a lighter.

Fold each piece in half, satin side inward, drip a small drop of glue on the satin side at a distance of 2-3 centimeters from the fold in the middle and press with your fingers. When the tape sticks well, turn it inside out with the satin side out. It turns out here is such a detail.

Then we fold this part in the form of a bow, so that the glued area is in the center, and the edges of the tape are bent to it from the back side.

We decorate the blank with a rhinestone or a bead. We make at least fifty such details. This is the most important stage of work, if a neat workpiece did not work out right away, we advise you to practice a little before performing the “finishing” parts.

When the details are ready, we collect the bow. On a felt circle, we begin to glue blanks in a circle with a slight overlap. Should fit 11-14 pieces in the first circle.

We glue the second and subsequent circles in a similar way, slowly moving towards the center of the felt circle, the number of elements in a row will decrease as it approaches the center. So you should get several circles, gradually decreasing in diameter.

The more elements, the more magnificent the bow will be. After all the blanks are glued, we attach an elastic band or a hairpin with glue or a glue gun, you can add ribbons for tying. A bright lush bow is ready.

These bows are sure to please your little princesses. You can decorate your hair with them both on weekdays and on holidays; with these accessories, novice fashionistas will look elegant and neat. And you will save on the purchase of hair accessories. You can, for example, please a first grader with such a necessary and beautiful gift for the first of September, or make a birthday present.

How to make a ribbon bow? Several ways to make decorative bows

Home / Lifehacks

Hello dear needlewomen! Sometimes, to decorate a gift or form your handicraft, you may need to make a beautiful bow and decorate your creation with it.

There are two proven ways to make such a bow from a satin ribbon or from any other ribbon in general.

We immediately warn you that from the first, and possibly from the second and third times, it may not be possible to perform such a bow, as shown in the video. Don't worry, it's just a skill that comes with practice.

But when your hands create the first cute bow, you will forget about your early failures :) It will be interesting to see who succeeded, so don't be shy and send photos of your work.

Ribbon bows can be used anywhere. Their use will add originality to everyday life, decorate gifts for the holidays, help create a unique hairstyle. There are many options for tying bows, from the simplest to the most complex and incredibly beautiful.

Bows are made from specially designed ribbons.

Tape materials:

atlas;
organza;
tulle;
reps;
capron;
paper;
lace;
cotton material.

Table of features of materials for tapes:

Material name	Positive sides	Flaws
Atlas	strength; durability; with proper care, the material does not lose shape; completely safe; absorbs moisture; not electrified.	The fabric is heavy, shrinks when washed in hot water, the raw edge crumbles rapidly
Organza	strength; dimensional stability; tissue deformation is completely excluded; rich appearance; does not require special care.	it costs expensive; unpleasant to the body; does not pass air well; working with such a fabric is quite difficult.
tulle	elastic fabric; light and durable; does not wrinkle; keeps heat well and passes air; dries quickly; affordable.	The material does not tolerate high temperatures, electrifies
Reps	strength; density; keeps its shape well; passes air and absorbs moisture; does not wrinkle.	Cotton fabric shrinks when washed in hot water, silk and woolen fabrics should be washed by hand only and dried in a horizontal position.
Kapron	strength; ease; smoothness; the material repels pollution; does not deform; does not wrinkle.	fully synthetic material; fades in the sun; does not absorb moisture; does not warm.
Paper	A wide variety of colors, glossy shine, the material is easy to work with	Wrinkles and does not smooth out, easily damaged
Lace	Elegant appearance, elasticity, the fabric is breathable	Requires special care: do not squeeze, do not overdry
cotton material	Natural, warm, durable, pleasant to the touch fabric.	Easy to wrinkle, difficult to smooth, shrink, fade after washing

Tools

To make your own ribbon bow, you will need:

ribbons as the main material;
ruler for measurements;
well-sharpened scissors;
tweezers for fixing the ends of the tape;
a source of fire for singeing the ends;
glue.

beads and rhinestones are used for decoration

Before making bows from ribbons, the following nuances should be considered:

for a correctly made product, the front side of the tape should be visible, the wrong side - hidden;
slices must be singeed;
in order not to spoil the shape of the material, it is not recommended to leave the ribbons tied for a long time;
if the bow will be used as a decorative element for clothes, the material of the bow must be compatible with the material of the clothes in its texture;
to determine the correct length of the ribbon for wrapping the box, you need to make 2 turns of the ribbon around the box and add at least 60 cm for the bow;
when tying a bow, it is important to leave the free ends of the ribbon as long as possible, and then shorten it with scissors;
You can shorten the ends in one of 2 options: cut diagonally or in a V-shape.

for gift boxes and bouquet arrangements, it is more convenient to use a ribbon with a wire inside, the product will retain its original appearance for a long time.

How beautiful to tie a bow from a satin ribbon

How to tie a bow from a satin ribbon in a classic variation:

determine the middle of the tape;
put the tape on the index fingers, the loops should be equal, the bottom of each loop is clamped with the thumb;
cross loops;
pass one loop into another;
tighten the knot.

To make a strict bow from a satin ribbon, you must:

lay out a strip of material on the table and determine the middle;
each edge of the tape is fixed with glue in the middle of the tape (with the correct addition, the side view resembles an infinity sign), smooth;
a small piece of tape (you can use a different color) wraps the joint;
glue the ends on the back of the bow.

To tie a double bow, you will need 2 ribbons of the same length.

The ribbons are folded together.
Throw 1 loop on the index fingers.
Cross the loops.
Pass one of the loops into the ring formed from below, tighten.
Smooth out the finished bow, straighten the ends of the ribbon, you can hide them inside the bow loops.

The double bow can be done in a different way, and it will look a little different:

take wide and narrow tapes of the same length;
place a narrow tape on a wide one, glue the ends;
fold the tape around, fasten the ends;
the junction of glued opposite ends is located in the middle of the bow, the junction is fastened to the parallel part of the future bow;
wrap the place of contact with a thin tape.

On the neck

You can tie a bow in the shape of a butterfly around your neck from a ribbon in one of 2 ways:

Throw the ribbon over the neck, cross the ends.
Pass up the right end of the tape, lower it down. The right side of the tape should wrap around the left side before crossing.
Now the left half of the tape wraps around the right, which is in a horizontal position, and is passed into the loop. At the end, the knot is tightened.
Position the ribbon around your neck so that its ends are of different lengths. Cross (and the longer part should be on top).
Grasp the short part of the tape with this part and lower it down.
Fold the short end in a semicircle.
The long part is located in front and also folds in a semicircle.
Pass through the loop behind the 1st half bow.
Tighten, straighten.

A voluminous bow around the neck is tied like this:

wrap the neck with a ribbon;
form loops;
weave and tie;
straighten the bow.

On the dress

How to tie a ribbon bow on a dress:

the ends of the decorative strip are folded in loops, crossed;
the place of crossing is fixed with glue (in this case, rhinestones are glued on top) or with a decorative pin;
attach the accessory to the dress.

On the belt

To beautifully tie a bow at the waist, you must follow this procedure:

wrap a ribbon around the waist;
fold the ends with 2 loops, cross;
skip 1 element into the formed loop;
tighten.

An original solution for decorating the waist would be a bow with one loop.

Order of execution:

the tape wraps around the waist, its ends should be different in length;
a loop is formed from a long piece of tape and crosses with a short end;
the loop goes down, wrapping around the short end of the tape;
drags on;
the length of the tape ends is adjustable.

How to tie a beautiful ribbon bow on chairs

Recently, it has become fashionable to decorate the backs of chairs with bows. The decoration of chairs should be treated very carefully: the color of the bow should match the nature of the event. In order for the bow to retain its shape for a long time, it is better to choose hard materials (organza), the edges of which must be well processed.

Most often, the backs of chairs are decorated with classic bows.

It ties like this:

wrap the back of the chair with tape;
make 2 loops at the free ends, cross;
with one loop wrap the other with a movement towards you;
tighten, stretch.

Another option for tying a ribbon on the back of a chair involves placing the decoration under the top bar.

Description:

the tape is folded in half;
hang the tape on the upper crossbar, while the loop is located on the inside;
the tails are threaded into the loop, tightened.

How beautiful to tie bows on September 1

You can tie it in one of 3 ways:

pleated bow;
4 petals;
luxury flower.

For the 1st option, you will need a wide ribbon and an elastic band.

The hair is gathered together and tied with an elastic band.
Then the hair is wrapped with a ribbon, one edge of the ribbon is left long, the other short.
The long end is folded several times and tied with a short one. The bow is ready.

Bow "4 petals" is done like this:

the collected hair is wrapped with a ribbon and tied into a single knot, the ends of the ribbon should be the same;
loops are folded from the tails and tied with a classic bow;
the remaining ends are also folded and tied.

Before creating the next hairstyle, the tape must be prepared:

sew the tape along the center;
assemble with an accordion;
give the ribbon the shape of a bow or flower and sew.

Attach the bow to the elastic band, gather the hair together, pull it off with an elastic band.

Bow on a gift box

Volumetric bows will always be appropriate on gift boxes.

Making a bow-ball:

fold the tape in several layers;
cut the corners of the resulting rectangle;
move the slices to the center by gently moving the tape;
tighten the narrowest part of the tape well;
pull out all the loops in turn, forming a ball.

To create a lush bow, you will need 3 ribbons of different widths.

Lay a strip of medium width in 4 layers, the layers should be located one above the other.
Also fold a wide strip and arrange the tiers crosswise.
Place the 1st bow on top of the 2nd.
Pull the center with a thin tape.

Large fluffy ribbon bow

To create a large bow, you will need a very wide ribbon, from which a square is cut first.

It is necessary to place the base (a small strong box) in the center of the square.
Top and bottom cover the base with the edges of the tape.
On the short sides of the resulting rectangle, make several folds.
In the middle, where the base is located, collect the tape and tie it.
Straighten the loops of the bow.

Wide ribbon bow

A bow made of a wide plain ribbon will look very beautiful and original if a narrow strip with an ornament runs along the central line along the entire length.

Bow creation scheme:

lay out a wide strip of tape on the table;
along the middle line and along the edges, attach a narrow bright strip or a strip with a pattern with hidden stitches;
wind the finished strip of fabric around your hand;
tie;
remove from hand and straighten.

From thin tape

For lush bows, a decorative strip of thin fabric is more suitable.

How to tie a bow from a ribbon is clearly shown in the photo

For crafts you need:

lay a strip of fabric over its entire length in turns, the turns should be located one above the other. The more turns, the more magnificent the bow;
tie tightly in the center;
straighten;
arrange the rings in a circle.

From a narrow band

How to tie a small ribbon bow in the shape of a flower:

cut the tape of the desired length (at least 100 cm);
measure 20 cm from one of the ends and form the 1st loop about 3 cm long;
Make the 2nd loop in the same way from the opposite end;
Make the 3rd loop from the opposite side near the 1st, continue until the entire strip of fabric is involved;
carefully tie the center of the folded strip of fabric with a special wire;
wrap the wire with tape;
spread the loops around.

From kapron tape

To make a magnificent bow from kapron, the ribbon must first be well ironed and treated with fire.

Now the tape is folded along the center line and sewn with small stitches along the fold. In this case, the thread should be strongly tightened.
Twist the stitched tape spirally.
Sew the edge gathered with an accordion.
Attach the finished bow to the elastic.

A voluminous nylon bow can simply be tied on the hair.

For this you need:

collect hair in a ponytail and wrap it with a ribbon;
tie a single knot (cross the ends of the ribbon, wrap the upper end of the ribbon with the lower end);
make loops at both ends of the nylon strip, leave both free parts of the tape long, tie;
form one more loop from the remaining long ends, tie.

From paper tape

To make a bow "Star" from paper tape, you must do the following:

cut the tape like this: The 1st 3 will be the longest, the 2nd 3 stripes will be a little shorter, the 3rd will be just as short as the 2nd stripes;
each strip is folded into a figure eight, the ends are fixed;
the first three largest elements are stacked in a circle, making up the lower tier;
a tier of medium-sized elements is laid on it in exactly the same way, the petals should be staggered, in the center the tiers are fastened together;
small petals are attached last in a similar arrangement.

wrap a small piece of tape in a ring and attach in the center of the craft.

How to make a bow from a ribbon for an extract

In order for the ribbon bow to look elegant, it is better to use ribbons of several matching colors and decorative elements. Such a bow will be multi-tiered.

Manufacturing instruction:

work begins from the lower tier, the tape is cut into pieces 20 cm long, the ends of each piece are singeed and sewn together;
the petals are laid out in a circle and connected to each other;
for the petals of the next tier, cut off strips 15 cm long, also make petals out of them and fasten in a circle;
place the upper circle of petals on the lower one, sew at the center point;
decorate the middle of the flower-bow with beads and rhinestones.

The plot of creating a bow for a newborn boy:

You can make a bow of 3-4 tiers. It is important to remember: the higher the petals, the smaller they are.

Bicolor

To make a two-color bow, you will need 2 multi-colored ribbons of different widths. A wider ribbon will form the basis and background, it should be solid. A narrow ribbon can be taken bright with an ornament.

Work process:

cut 2 pieces of the same length of a wide and narrow tape;
place a narrow tape on a wide one along the center line, fasten the ends;
roll into a ring;
glue the joint;
smooth out;
pull the bow in the middle with a narrow ribbon, hiding the joint under it, tie;
adjust the ends.

Openwork "Dior"

The Dior bow is somewhat different from other ribbon crafts with loops and knots. It is a semicircular half of the bow, lying in the same plane. For its manufacture, you can choose any ribbon, including lace.

Procedure:

rings are made from ribbons of different lengths;
rings are superimposed on one another from largest to smallest;
in the middle they are fixed with a stapler, so each ring takes the form of a figure eight;
the smallest ring is superimposed on top, fixed;
hide the fixation point under the tape that passes through the small ring.

With a fork

To make a bow on a fork with your own hands, you will need a ribbon with a length of 15 cm and a table fork with 4 prongs.

Procedure:

wrap the tines of the fork with a ribbon, cross on the inside;
determine the length of the ends of the tape, one of them should be much longer than the other;
stretch the long end through the middle gap between the teeth;
the same end is brought up between the 2nd and 3rd teeth;
the resulting small loop does not need to be tightened yet;
the tape is threaded into the loop inside;
pull the end of the workpiece out of the loop, tighten the knot;
remove the finished bow from the cutlery;
adjust the ends.

Kanzashi technique

How to make a ribbon bow using the kanzashi technique:

first you need to cut the ribbon into small rectangles, the more rectangles (for example, 15), the more voluminous the bow, a petal will be made from each rectangle;
put the tape on the table face down;
bend the upper corner to the bottom line and fix with a safety pin;
flip the rectangle
on the front side, bend an acute angle to the bottom;
hide the end
fix with a pin;
do the same on the opposite side;
fold the workpiece so that the bent corners are inside;
sew the bottom edge, tighten the thread;
turn over, straighten;
perform all the petals in a similar way;
for the lower tier, put on a thread and close 7 petals in a circle, for the middle - 5, for the top - 3;
glue the base to the middle of the lower tier from the wrong side;
on the front side, glue the middle one to the lower tier, then the upper one.

decorate the middle with a large bead.

From rep ribbons

How to tie a bow from a rep ribbon:

Fold the ribbon into a figure eight, secure the ends with pins.
Bend the middle of each loop to the middle of the bow, fix it, you get 4 small loops.
Both bows are stitched in the center, the thread is tightened, the place of the stitch is wrapped with a thread, the thread is fixed.

From ribbons of different materials, you can create a wide variety of bows to decorate clothes, gifts and interior items with them. The technique of tying bows is extremely simple, anyone can handle it.

Article formatting: E. Chaikina

A useful video clip on how to make a beautiful bow yourself

How to make an elegant two-tone bow can be found in this video:

Hair bows can make even the most ordinary hairstyle bright and festive. To make your bow the most original and unusual, you can easily make it at home with your own hands. In fact, making bows is a very entertaining entertainment, as a result of which you are left with amazing elegant accessories for any occasion. It does not take much effort to create a regular model. Even a child can do this. But to make more complex hair ornaments, you will need patience, perseverance and a little knowledge.

QUICK ARTICLE NAVIGATION

Multi-layer ribbon bow

A ready-made multi-layered bow, made by oneself, is no different from its store counterpart. But, creating it at home, you can not limit yourself in the choice color, ornament and the material itself.

To create this variation of the bow, you will need:

trimming the tape of your choice, namely 5 pieces, as shown in the photo;
a hairpin or elastic band that will attach the product to the hair;
thread with a needle;
glue.

At the first stage it is necessary do blanks. It is necessary to bend each of the three ribbons of the same length that were prepared earlier, so that their edges converge in the center, and sew, as shown in the photo.

Two of the three finished petals are connected to each other by squeezing their centers with a thread. Thus, a simple four-petal bow is obtained.

The longest ribbon should be wrapped in such a way that a bow with two loops and two tails is formed. It should be tightly fastened with threads in the middle.

As a result, you should get three blanks: from two loops, from four petals and a bow with ponytails.

All of them are fastened together in the listed sequence with the help of threads and glue for reliability.

To hide the middle sewn with thread, the last and shortest shred is used. They simply wrap the middle of the bow around, and behind the ends of the ribbon sit on the glue.

It remains only to attach a hairpin with glue on the back of the product, let it dry and wear it with pleasure.

The creation technology is shown in the video:

Spectacular two-tone bow

To create these hair bows you will need:

satin ribbon of medium thickness of the same color;
thin satin ribbon of a different color;
very thin pieces of ribbon of any of two colors;
threads.

When creating bows, it is not necessary to adhere to the colors and materials that are described here. After all, you create a masterpiece with your own hands, so you also choose the style.

From the widest ribbon it should turn out three-layer bow base. To do this, you need to decide on its diameter and begin to evenly wind the tape to get three full turns. Then fasten the middle with a thread. More clearly presented below.

Then you need to move on to creating upper bow. It will consist, as it were, of two layers located on top of each other. We fasten the ends of the ribbons in the middle and tie the two tiers together so that they do not fall apart.

Paper technology

Graceful and unusual "jagged" decorations will appeal to anyone, and if you master the technique of execution, you can make such a miracle yourself.

For manufacturing it is necessary to prepare:

paper of sufficient density (old posters are perfect);
scissors;
glue or stationery stapler;
ruler.

How to make a paper bow:

Cut strips of paper of the same thickness.
Using a ruler, measure pieces of different lengths.
Roll each piece at an angle without deforming the paper.
Fasten two pieces together to make a kind of "eight".
In total, three large and medium "eights" are needed, as well as two small ones.
Make the last figure simply in the form of a circle.
Starting from the longest "eights", lay out three pieces in the form of a circle, then fasten them in the middle.
The average length of the "eight" is also fixed in the form of a circle.
Lay out the middle “circle” on a large figure so that the teeth fall in a checkerboard pattern.
The remaining two “eights” of small size are fixed crosswise and set on top of the resulting figure.
The “top” of our bow will be a paper circle laid on its side.

To illustrate the process of assembling a paper bow, there is a photograph illustrating the process in an accessible way.

Ribbon manufacturing technology

The most suitable material for creating such a decor are ready-made tapes, the range of which is constantly increasing.

There are many types, the most common of them: satin, guipure, silk and translucent organza.

Manufacturing technology can be conditionally divided into stages of complexity. Having successfully mastered one option, you can complicate the task a little and proceed to the next.

A simple DIY satin ribbon bow

To do this, a strip of sufficient length is taken, and the principle of the knot itself is shown in the photo.

Several options for ribbon bows

The second option will be no less pretty, as well as easy to perform. To do this, circles are formed from suitable strips of different widths, but of the same diameter. Having attached the tapes to each other, the middle is fixed with another segment. The resulting decor can be used not only to create hair ornaments, but also all kinds of ideas, a list of which you will find below.

How to tie a bow on a fork

You can try to use improvised means. A simple and very attractive way to beautifully tie a ribbon bow is presented by an original method using an ordinary table fork.

The step-by-step instructions in the picture will help you master this technique; for convenience, the ends of the tape are signed with letters.

Such decorations are extremely attractive and suitable, for example, for decorating clothes. With their help, you can even color a nondescript turtleneck with new colors.

Step by step manufacturing instructions

A simple technique for making bows on a fork can be slightly modified. For this, a step-by-step instruction for a do-it-yourself ribbon bow and corresponding illustrations are presented.

How to tie a ribbon bow on a fork:

Push the tape - fasteners between the middle teeth of the fork.
Skip the main tape alternately between the teeth in a checkerboard pattern.
Fix the beginning of the strip in your hand, the rows alternate to the very top. The more there are, the more magnificent the product will turn out.
Tie the resulting loops with a fastener tape, cut off the ends and scorch a little with fire so that they do not bloom.
Alternation of stripes of different colors, sizes and surface textures.
Use of ribbons with a pattern.
Threading will make the figure more voluminous.

Various variations:

The main improvement may concern the dimensions of the product. Large satin ribbon bows can be made using a suitable size cardboard template or your own fingers.

Options for decorating flower bouquets

Do you want something interesting?

Option number 1:

Wrap the tape around the palm of your hand or any suitable object.
Trim the ends of the edges for a more comfortable fit.
Align the cut parts to each other (now they will be in the middle of the tape).
Fix and straighten the "petals".
The more turns there are, the more magnificent the bow will turn out.
Fix in the middle.
"Fluff" the coils of the tape.

Option #2:

Fold the tape several times with a “figure eight”.
Fix in the middle.
"Fluff" the coils of the tape.
Trim the ends neatly and the bow is ready.

Option #3:

Fold the bow according to the principle of the first option.
Make cuts along the edges of the fixed tape.
Fluffy bow will have a more voluminous and interesting look.

Option #4:

The tape is twisted at the attachment points.
"Petals" are formed right in the hand. Thus, you can control the volume of the bow, which is very convenient for decoration. You can make the ends of different sizes.
After the desired size and type of product have been achieved, secure in the middle with the end of the tape.

Do-it-yourself original bows from satin ribbons can be made using the following technology:

Wind a satin ribbon between two fixed knitting needles.
Lay a line in the middle.
Remove the ribbons and pick up the thread.
Fix the thread, cut the ends - the bow is ready.

American design options

How to make an American-style satin ribbon bow:

"Eights" are formed from a thin ribbon.
Separate parts in two or three pieces are fastened together.
From below, you can make a base of several straight ribbons fastened in the middle.
For additional decoration, you can make the edges jagged.
Fasten the two parts together, you can glue a bead or a simple smaller bow on top.

Individual elements can be seen in the photo.

The end result should be something like this.

For children's hairpins, it is better to take a more durable rep tape. Now they sell products of interesting design, for example, favorite cartoon characters.

What can be decorated with homemade bows:

Decoration of clothes, belts and shoes.
Sofa cushions.
Cutlery before serving to guests.
Napkins, towels and kitchen curtains.
Newborn envelope.
Cases for bottles of champagne.
Wedding glasses, cars, ribbons of witnesses and other holiday attributes.
Hair ornaments.

New Year's bows on the Christmas tree

DIY bows for the Christmas tree made of felt

This unique material is highly demanded in needlework. Its main advantage is a dense "plush" structure, the edges of which will not crumble, which means that they do not need additional processing.

You can make rounded edges, you get a completely different model.

A more complex model of such a decor needs a detailed description, the whole process is clearly shown in the photo.

New Year's decor with your own hands:

Felt cut into strips of arbitrary thickness.
Fold the strip in half and sew the edge of the fabric with small stitches.
Cut the fold points at regular intervals, without reaching the edge.
Gather the thread carefully to make a circle.
Trim and fix the edge.
Decorate the top as you wish.

How to make a ribbon bow for a Christmas tree

In order to understand how to tie a bow from a ribbon, just look at the above photo. With some skill, such decorations can be done quickly enough.

With beautiful spirals, you can not only decorate a Christmas tree bow from a ribbon, but also use the idea to create hair ornaments.

Technology for the execution of spiral elements:

Wrap satin ribbon on wooden skewers.
Secure the edges with pins.
Put in the oven at about 180º C for five minutes.
After cooling, the tapes will acquire beautiful and uniform bends.

Original design from tulle

Homemade bows are a great option for a memorable decor, the use of which is extremely wide.

Gathered for a visit, chose a gift, now you don’t know how to pack it? Then you are at the right place. In this article, we will look at how to make a ribbon bow for decorating gifts, and also tell you how you can make an exclusive present for every taste from a regular ribbon.

How to create a festive mood?

A beautifully packaged gift with an original decoration always creates a festive mood, whether you give it or gave it to you. It is a beautiful bow, which can be called a classic decoration technique, that “warms up” the fantasy, making you tremble in anticipation of a surprise. The originality of this decoration lies in its versatility, since a ribbon bow can be made in different shapes or sizes, and today's market offers the widest selection of colors, from plain to complex patterns. Such decorations can give the souvenir more solemnity. Initially, you need to pack a surprise in gift paper, how to do it, read the article: well, we will teach you how to make a bow from a ribbon, most importantly, be patient and not quit work after the first failure, because a wonderful grateful smile of the hero of the occasion, to which you gathered in guests deserves a little effort.

How to make a voluminous ribbon bow to decorate a gift?

To get a really voluminous bow, you need to give preference to cuts made of hard material. Having picked up the ribbon, we do the following:

Having decided on the size of the bow (the longer the loops, the larger the bow will be), you need to make loops from the tape in 5–9 additions, laying them one on top of the other.
Smooth out the resulting loops and carefully trim the edges, as indicated in the photo below. You should get almost triangles around the edges.
Take the loops in the middle and part them on the sides so that the cut parts are in the center.
Fasten the narrowest central part. You can do this:

the same ribbon
sew with threads;
fasten with a stapler;
twist with wire.

Straighten the resulting half-loops, give them volume and a beautiful bow is ready!

How to make a fluffy ribbon bow? Video lesson

How to make a simple ribbon bow to decorate a gift?

You can make a strict version for a “male” present. It will look great both on the packaging and on the bottle of an expensive strong drink. And you can read more about souvenirs for the men's holiday in the article:. Let's get to work:

Cut off a piece of wide ribbon of the desired size, fold, glue the edges with glue. Should be a ring.
Flatten the resulting ring.
Hide the joint under the same, but thinner cut.
Gently glue the edges and a strict decoration is ready.

How to make a bow from a ribbon - a classic version

The classic version of the decoration is very simple in execution, while creating an excellent frame for any present.

With such a bow, both a book, a box of chocolates or a service, as well as ordinary wild flowers, will look great. Such a classic is performed according to the following steps:

Take a long ribbon and fold it into two loops, as in the photo below. In each hand, there should be one addition.
The loop that is on the left to start at the back, crossing two additions. It turns out a circle at the bottom.
Pull the right loop through the formed circle, pull it off. The center should be in the middle.
Straighten the loops - a beautiful bow is ready! If necessary, you can cut the lower ends to the desired shape (oblique, triangle, etc.).

Video tutorial: how to tie a classic-style ribbon bow to decorate a gift?

How to make a Dior bow from ribbon for decorating souvenirs?

The Dior bow is used not only in decorating gifts. With it, unforgettable decors for parties, weddings and other celebrations are created. By the way, take note of the rules of conduct at the table at such festivities. They are described in the article:.

To make such a bow, you need to follow these steps:

Prepare four cuts, of different lengths.
Roll each of them into a circle and fix with threads or glue.
Fold the circles in ascending order one on top of the other.
Tie the resulting design of ribbons in the center by inserting the strapping tape into the upper (smallest) circle, as in the photo below.
Attach the structure.

How to make a ribbon bow on a fork?

Do you believe that you can tie a beautiful bow on a fork? No? Then let's learn, we offer to try out two options for the execution of such an ornament.

Option No1

Let's try to solve the following equation: Ribbon + Fork = Original bow. To resolve, you need to do the following:

Cut a narrow ribbon of the desired size. For convenience of work, it should be at least 18 cm.
Conditionally divide it into a long and a short side. The short side will not be used.
Pass the long part between 2-3 cloves of the fork used.
And its end, bring up between the same teeth.
After these steps, you should get a small loop. Don't tighten it just yet.
Pass the rest of the long end through the loop inward again.
Pull this end out and tighten the knot.
Trim the long ends to the desired length, singe them with matches or a lighter.

OptionNo2

To get a beautiful bow in the form of a lush flower, you need to use two different ribbons:

thin;
wide nylon.

Execution steps:

Insert a narrow ribbon crosswise into the center of the fork. It will be needed almost at the end of the work.
Braid the fork teeth with a wide nylon cut, as shown in the photo below.
Pull off the bindings with a thin ribbon, tie.
Remove the workpiece, straighten.
Scorch the edges with fire.

The decoration is delicate. It will ideally complement any souvenir intended for the beautiful half of humanity.

Video tutorial: how to make a ribbon bow on a fork