Christmas tree made of paper bags with your own hands. How to cut a Christmas tree out of paper and sew it. Watch also other videos on how to make a Christmas tree out of paper

The Christmas tree is one of the main attributes of such a large-scale holiday as the New Year. Nobody forgets about it, buying live or artificial Christmas trees to their home and decorating it with different outfits, souvenirs, garlands. We will make a Christmas tree out of paper, which can be placed somewhere in the apartment (for example, on the table), or it will not even be a shame to give such a craft to relatives or friends. Next, we will deal with several ways to create Christmas trees from paper.

How to make a Christmas tree out of paper (1 way)

You will need green paper, a ruler, compasses, glue, scissors and a pencil (or a tube for juices, cocktails).

Using a compass, draw a few circles on paper. Each next circle is 1-2 cm smaller than the previous one. Choose the number and size of the circles yourself, depending on what size you want to see the Christmas tree in front of you.
We fold each circle in half once, a second time and a third time (that is, you need to fold each circle three times in half). To make the fold lines clear, we draw along the edges with scissors.
We straighten the circles. We cut a hole in the center of each that matches the diameter of a pencil or tube (depending on what we will use). It is also worth saying that the circles are the tiers of our future Christmas tree.
We glue the pencil or tube with green or brown paper.
Now we begin to collect the Christmas tree. All tiers are strung on a pencil.
We decorate the top of the Christmas tree with a beautiful bead or star. Decorate the Christmas tree, if desired, you can sparkle

How to make a Christmas tree out of paper (2 way)

You will need green paper, scissors, pencil, glue, compasses, ruler, needle, wire.
On green paper, draw a circle with a compass, the size of the lower tier of the future Christmas tree. Next, draw another circle inside the first circle, stepping back from the first one a little more than half the radius.

Using a ruler, divide the circle into 12 sectors.
Along the lines of cases, an incision to the inner (second) circle.
We turn each sector into a cone, which we fix with glue.
Similarly, we create the rest of the blanks, gradually reducing their size.
We make a hole in the center of each blank with a needle.
We turn the bottom of the wire into a spiral.
We collect all the tiers of our Christmas tree on a wire. We fix on top a cone made of paper.

How to make a Christmas tree out of paper with your own hands using the quilling technique (3 way)

You will need: green paper strips 5 mm wide and four strips of 1 cm each, red and yellow strips 3-5 mm wide, toothpicks, glue (instant and PVA).

We use four green strips having a length of 30, 20, 15 and 10 cm. Using a toothpick, we twist them. We remove the part from the toothpick and let it bloom a little. We fix the end of the strip with PVA glue. We give all the spirals the shape of a drop by holding and slightly pulling one of the ends of the spiral up.
Tightly wrap wide green stripes on a toothpick and glue the tip to them, preventing it from blooming. This will be our tree trunk.
For the top of the Christmas tree, we make a drop from a green strip with a length of 30 cm.
Now we begin to collect the Christmas tree, fixing its elements with instant glue. We glue the parts of the trunk and give the glue time to dry.
We insert a toothpick inside the trunk and glue our droplets-twigs. We start gluing with the smallest ones, which we glue to the top of the Christmas tree.
We make toys from yellow and pink stripes by twisting the paper without using a toothpick. You can fasten the ends until the paper is unwound, or you can make the toys a little looser and give them the shape of small droplets. Glue balls to the branches you like.
We glue the drop at the very top (do not forget about it), and decoration on it.
You can make, if desired, a stand. To do this, you will need to make nine curls from white paper strips. Tightly glue the curls together. Now we fix the Christmas tree on a snowy white stand with glue.

How to make a Christmas tree out of paper with your own hands (4 way)

You will need: green cardboard, glue, scissors, adhesive tape, colored paints, pencils, felt-tip pens. Stickers, glitter, etc. can be used as additional decorations.

1. Fold a sheet of cardboard in half and cut it along the fold line.

1. Fold the resulting parts in half again.
2. Draw a half of the Christmas tree on one of the cardboard halves opposite the fold (see picture).

1. Fold the sheets together and cut with scissors along the drawn line. As a result, you will get two Christmas trees of a similar size.
2. Mark the middle of each tree discreetly using a ruler.
3. Make an incision on one tree, starting from the top to the middle, and on the other from the bottom (base) to the middle.

1. Insert the Christmas trees into the cuts to end up with one voluminous Christmas tree.
2. To give the Christmas tree more stability, use adhesive tape - use it to glue the lower and upper halves.

To decorate the Christmas tree, use pencils, felt-tip pens, sparkles and other materials. You can use a hole punch to make small multi-colored circles, which then stick on the Christmas tree. An asterisk can be glued to the top of the head with tape.

How to make a Christmas tree out of paper (5 way)

You will need: colored cardboard, glue, scissors, a hole punch, a small stick with a diameter approximately equal to the diameter of the holes that are obtained from the hole punch, decorations to taste.

A rectangular cardboard is taken, folded several times as shown in the picture above, and then pierced in the center with a hole punch. Then this cardboard is cut at an angle so that the craft in the end does not look like a Christmas tree (see picture). We drag our stick into the hole, and if it does not hold firmly, then we can fix it with glue. We decorate the Christmas tree. Jewelry can be attached with glue. Such a Christmas tree can be placed somewhere (if you make a basis for it), or you can hang it somewhere.

How to make an origami Christmas tree (6 way)

The material for such a Christmas tree will be one large magazine or several small magazines. If the magazine has a hard cover, then you can simply remove it.
Do the following for each page:

Starting from the top right corner, fold the page at a 45 degree angle.
Fold the sheet diagonally in half again.
The corner that extends from below the borders of the magazine must be tucked up.
We also do this procedure with the rest of the pages and as a result we get a beautiful origami Christmas tree.

How to make a Christmas tree out of paper using the origami technique (7 way)

First, you will need to make triangular modules, from which the Christmas tree will take shape. They are easy to make. You just need to know how to make them and be careful when creating them.

Modular craft
1. We fold the module

2. We collect twigs

3. We begin to collect the Christmas tree

How to make a Christmas tree from corrugated paper (8 way)

How to make a Christmas tree from paper strips with your own hands (9 way)

You will need:

colored cardboard or green colored/wrapping paper
tape (in this example, its width is 6 mm and length is 25 cm)
fine brush
1 brightly colored bead (golden in this example)
a few beads of a different color (in this example, 12 brown beads)
scissors
ruler
pencil

1. Draw and cut strips of colored cardboard 4 cm wide and long: 8, 10, 12, 14, 16 and 18 cm.

2. With the tip of scissors or a needle, make 3 holes in each strip: 1 on the right, 1 on the left and 1 in the middle.

3. Take a thin brush and make a small loop at one end.

4. Start threading a thin brush through all the holes in the paper strips. Start with the longest strip and add the next one in descending order. Add 2 beads between each strip.

5. When all paper strips are used, add 1 bright bead to the top of the Christmas tree.

6. Make a loop at the end of the brush so that the craft can be hung. Cut off the excess part of the brush.

7. Pass the ribbon through the loop and tie the ends into a knot.

How to make a Christmas tree out of colored paper (10 way)

You will need:

- thick cardboard or fiberboard
- skewer
- PVA glue, super glue or hot glue
- colored cardboard (possible with patterns and ornaments)

1. Cut a rectangle out of cardboard, which should be slightly larger than the base of the future Christmas tree.

2. Stick the skewer into the cardboard and secure it with glue.

3. Cut out several circles of different sizes and colors from colored cardboard, 3 circles in each group. Make a small hole in the center of each circle.

4. Add a drop of glue to each hole and start stringing circles onto the skewer, starting with the largest. The distance between the circles can be up to 1 cm.

5. Cut out a star from cardboard and glue it to the top of the Christmas tree.

How to make a beautiful paper Christmas tree with roses for the new year (11 way)

You will need:

- old newspaper or unwanted book
- cone
- PVA glue
- scissors
- beads (optional)

1. Make a cone out of paper and make many roses - a few large ones for the base of the cone, medium ones for the central part, and small ones for the top part.

* If you purchased a foam cone, then you need to paste over it with pieces of newspapers (see image).

To make roses (any color), follow these simple instructions:

Cut out squares of 10x10 centimeters from thick paper.
Draw spirals on the squares.
Cut out a circular strip along the intended spirals.
Wind the paper spirals from the outer edge to the inner.
Wrap the pink bud tightly and fasten the tip with glue.

2. Start gluing the paper roses to the cone, starting at the bottom of the cone and moving towards the crown.

3. If desired, you can glue 1 bead in the center of the roses - this way you can decorate all the roses or just some.

4. You can add one more piece of jewelry to the crown - it can be a piece of tinsel, a bell or an asterisk.

* If you want to learn how to make an asterisk, visit .

How to make a Christmas tree out of paper (12 way)

You will need:

- colored paper, colored cardboard, an old music notebook or an unnecessary book

- PVA glue

- curly scissors and simple scissors

- thick cardboard

- skewer

- glue brush (optional)

- decorations (sequins, bows, beads, buttons, stars).

1. Cut out a platform for the future Christmas tree from cardboard.

2. Insert the skewer into the cardboard platform and secure it with glue.

3. Start cutting out squares from paper. It will be more beautiful if you cut with curly scissors (they can be found in stationery).

* You need to cut 9-10 squares - first 9 squares with a side of 20 cm, then 9 with a side of 18 cm and so on, reducing each group of squares by 2 cm.

* Choose the total number of squares yourself. You can also choose the size of the squares yourself - if your Christmas tree is high, then you can reduce the size of the next group of squares by more than 2 cm, and if it is short, then less - 1-0.5 cm.

4. Cut out a few small squares from cardboard that will be between the squares of colored paper.

5. Start stringing 3-4 squares of colored paper, between which there will be a small cardboard square.

* If you use 3 squares between the cardboard parts, it is most convenient to cut 9 squares of each size.

* You can fix the squares on the skewer with glue.

6. To decorate the Christmas tree, you can gently apply some glue with a brush to the tips of the squares, then gently sprinkle glitter on them.

7. On the crown, you can glue a button with a bow or something else - an asterisk or a bead, for example.

How to make an original Christmas tree from colored Japanese paper with your own hands (13 way)

You will need:

- colored cardboard

- thick paper with a pattern (can be replaced with colored cardboard)

- colored or wrapping paper (you can use a page from an old magazine)

- a white sheet of A4 paper

- 2 skewers

- pencil and ruler

- PVA glue or glue stick

- scissors

- a darning needle (if necessary).

1. Cut out 14 rectangles of 2 of the same size from colored cardboard. In this example, 2 rectangles are 21 x 28 cm, two more are 18 x 28 cm, then (also 2 each): 16 x 28 cm, 13.5 x 26 cm, 12 x 26 cm, 9 x 25 cm, and 6 x 22 cm.

2. Preparing the basis for the Christmas tree:

Cut plain A4 paper into strips 2 cm wide. Roll the strip into a circle, add a little glue at its end and glue the next strip (see image). Repeat the same action until you glue all the strips into one large circle with a diameter of 3.5 cm.

* The larger the circle, the more stable the tree will stand.

3. Take a large rectangle of colored cardboard and start folding it with an accordion, 1.5 cm wide. Cut the ends of the accordion into a rounded shape.

4. Fold the accordion in half and glue the sides - you have a semicircle.

5. Repeat the same with the second rectangle, then glue two semicircles to form a circle - these will be the branches of the lower level of the tree.

* To secure the halves of one circle, you can pass a thin wire through them and twist its ends from the back.

6. Make similar images for 6 more levels of your Christmas tree.

7. Take colored or wrapping paper and cut off several small rectangles from it, about 2 cm wide, with which you will later cover the skewers.

The skewers will play the role of the tree trunk.

8. Thread the skewers through one large circle. Since you need to leave gaps of about 2 cm between the circles, these gaps need to be hidden, so we will wrap them in small rectangles of colored paper.

9. After each circle, wrap the skewers with colored paper, 2 cm wide, and glue its ends. Continue repeating this action until all branches of the tree are put on skewers.

10. It remains to insert the skewers into the round base (see point 2) and fix them with glue.

* You can decorate the top of the Christmas tree to your taste - a paper star, a bead or a button.

Watch also other videos on how to make a Christmas tree out of paper:

Now you know about the many ways to create a Christmas tree out of paper. Happy crafting!

To prepare your home for the New Year and Christmas holidays, you can make several small voluminous Christmas trees. For work you will need paper, cardboard, glue, additional decor and creative imagination. Today, the craftswomen of the editorial site will introduce you to various techniques for making winter beauties, with which you can decorate a postcard or interior. If it is not possible to put a real fir tree, small handmade Christmas trees will create magic and a festive mood in your home.

How nice it is to remember the past and congratulate loved ones on the New Year with an unusual postcard with a Christmas tree made of paper with your own hands. It will keep the warmth of your hands for a long time and will be a beautiful decoration of the New Year's interior.

How to make an origami tree

For a voluminous Christmas tree made using the origami technique, you need to prepare three squares with sides of 4, 6 and 8 cm. You can make the product larger, just increase the parameters proportionally.

Illustration	Action Description
	Fold the square in half, unfold and fold in half again on the other side. Expand and fold diagonally, first on one side, then on the other side. Thus, the workpiece will be divided into 8 segments.
	Fold the two corners inward to form a triangle. Perform similar actions on the opposite side. As a result, the square will take the form of a double triangle.
	Bend the top two corners of the triangle inward to the center line.
	Perform similar actions with the rest of the blanks.
	Insert the blanks into each other and glue on a sheet of paper. You can additionally decorate the card with a congratulatory inscription and New Year's decorations.

Show your imagination in the design of the New Year's card, this will please and surprise your loved ones at the same time.

In more detail, a master class on making an origami Christmas tree can be viewed on the video:

Christmas tree postcard from triangles and rectangles

To make a voluminous Christmas tree with your own hands, you need to prepare three types of paper with beautiful patterns and a cardboard blank for a postcard.

Then all the blanks must be folded in half and glued in pairs of different patterns. Then you can glue them to the postcard for decoration.

You can make an unusual voluminous Christmas tree, which will open in a double-sided postcard. To do this, you need to cut several rectangles 1-1.5 cm wide, fold them like an accordion and glue them to both sides.

Christmas tree from newspaper or magazine tubes

Glossy magazines with bright pictures or simple newspapers are suitable for this Christmas tree. It is necessary to wind several tubes of different lengths, their width depends on your imagination. After that, you can start assembling a colorful tree. You need to take thick paper and glue the blanks. The shortest tube should be on top, the longest one on the bottom.

Additionally, it is necessary to make a trunk out of two sticks and wrap it with twine.

Christmas tree card with a riddle

To make a Christmas tree card, we need:

paper is white, but it is better to take for pastels;
corrugated cardboard sheet;
double-sided tape;
spray paint;
scissors, clerical knife;
golden lace;
beads or rhinestones;
glue gun;
pencil;
ruler.

To make a postcard, you need to prepare and cut out a template; pastel paper is suitable for this.

The course of work is the following.

On the cover in the shape of a rectangle, you can stick your favorite photo or write a congratulatory wish.

How to make an unusual gift: a cardboard box in the form of a Christmas tree

A great idea is to make a box in the form of a Christmas tree in which to place a small surprise. In addition, if the wedding takes place in winter, all boutonnieres can be made in this format.

For work we need:

a sheet of green cardboard;
glue, scissors;
tulle.

Illustration	Action Description
	Cut out 2 Christmas trees 15 × 18 cm from cardboard.
	Cut out two rectangles measuring 31x5 cm.
	Step back from the long side 1 cm, push the entire length under the ruler with an awl. Measure a distance of 10, 10, 9 and 2 cm and push with an awl along the width of the strips. Collapse the workpiece according to the markup.
	Glue double-sided tape along the long side, make cuts according to the marking and cut off the corners as in the template. Then stick the tape along the width of the strip.
	Remove the protective film from the side and glue the workpiece. Get the shape of a triangle. Bend the edges inward and glue on one of the Christmas trees.
	The second rectangle must be made smaller by 1 cm, with an awl, push the lines at a distance of 9.8, 9.8, 8.8, 1.8 cm. Then repeat all the steps in the same sequence.
	The second blank should be smaller than the first, glue the second Christmas tree template to it.
	Cut the tulle into 4×4 cm squares, roll up into a ball and fix with hot glue. Fix them on the Christmas tree, in addition, you can make the top of a bow and decorate with a chain and beads.

Master classes on making voluminous Christmas trees with your own hands to decorate the New Year's interior

Small Christmas trees made of a cone and decor made using various techniques are the best surprise for the New Year. There are a lot of options, all of them are available even to children, it will take you only 30-60 minutes to make one tree. Napkins, threads, beads, tinsel, feathers are often used as decor, you can take everything that is in your house.

Technique for making three-dimensional Christmas trees based on a cone

For Christmas trees, a base is often used, made in the form of a cardboard cone. It can be made with or without a bottom. For example, for a topiary tree, the bottom must be closed. If the Christmas tree is in the desktop composition, you can not do it.

What can you make a Christmas tree cone from: 2 manufacturing options

To make a Christmas tree cone without a bottom, you need to take a sheet of thick cardboard, it will better withstand the weight of the decor. In addition, we will need scissors, tape or glue, a pencil, and a round object, such as a plate.

Draw a round object on a sheet of cardboard.
Cut a segment, the diameter of the Christmas tree depends on its size.
Roll into a cone shape and secure with glue or tape.

Another faster way to make a cone. To do this, you need to roll the cardboard into a bag, glue the edges and cut off the excess with scissors.

Bottom making

To do this, put the cone on a sheet of cardboard and circle the bottom with a pencil. Then draw another circle 2 cm larger and cut it out. For accuracy of calculations, make a fitting. Cut the strips in increments of 0.5 cm from the outer circle to the inner one, fold them over and grease them with glue. After that, insert a blank-bottom into the base of the cone.

Decorating the Christmas tree cone with corrugated paper roses and paper braids

Christmas trees decorated with paper ribbons in the form of a fringe look unusual and very gentle. You can fasten a regular tape tightly in a spiral, but we suggest using a more time-consuming process - the result will surely please you.

Prepare for work:

corrugated paper;
dark-colored blank cone;
glue gun and scissors;
decor.

The order of work is the following.

Volumetric Christmas trees made of cardboard and paper for 4-8 blades - an unusual interior decoration for the New Year

For the manufacture of a Christmas tree with several blades, plain or corrugated cardboard is suitable. To make a tree with 4 blades, you must perform the following work.

Pigtail Jewelry

You can make a pigtail out of corrugated paper and decorate the cone of our Christmas tree with it.

Illustration	Process description
	Cut the tape about 10 cm wide, fold the corner and smooth it well
	Bend the tape a little further along the length, then holding the bend with your left hand, turn the knot outward with your right hand.
	Similarly, at a distance of about 2 cm from each other, continue to bend the paper outward.
	Make pigtail knots along the entire length of the corrugated paper.
	Glue the tape to the cone with the pigtail down.

In more detail, the process of making pigtails can be viewed on the video:

Vytynanka technique for making New Year's beauties

Vytynanki have recently gained their popularity in decorating rooms. They are used to make decorations for windows, garlands, and we propose to make an unusual Christmas tree from delicate patterns.

Vytynanka templates for making paper Christmas trees

For work, we need manicure scissors and a clerical knife, but first we need to choose a template for cutting a Christmas tree out of paper, which will serve as the basis for our master class. You can print any pattern or just draw it on a sheet. To cut the diagram well, you need a solid base, a wooden board will do. The number of patterns depends on the height of the product, preferably at least three.

Christmas tree assembly sequence

After all the templates are cut out, they need to be bent along the center line and glued together. Parts are not always glued in the center, you can choose a scheme in which the workpieces are fastened at the edges.

Modular trees on a rod

The peculiarity of such Christmas trees is that for them a set of modules must first be made, which are then fixed to the rod in a certain sequence. This is a great decoration for your desktop, fireplace portal or window sill.

New Year paper crafts using the quilling technique: a Christmas tree-pendant and a Christmas tree on a rod

To begin with, let's try to make a small Christmas tree pendant using the quilling technique, and then we will show how to fix the parts on the rod. For work we need:

strips for quilling;
cardboard painted with gold paint;
round and triangular patterns;
beads;
silk ribbons;
toothpick and glue;
scissors and thin wire.

Illustration	Action Description
	Fasten the tape to the toothpick, then wrap it completely, and then lay it in the template.
	Remove the tape in the form of a roll from the template, glue the free tail and place it in the triangle template. Prepare all parts in the same way.
	Glue one module to the cardboard, glue 2 yellow beads under it.
	Glue 2 modules below, then green beads.
	Glue 5 rows of modules in the same way, then cut out the outline of a tree from cardboard.
	Glue the decor of the bows to the Christmas tree.
	Fasten the tape to the lower module and tie a bead. Repeat the same steps for the entire bottom row.
	Pendants are used in decorating the interior or Christmas tree

In more detail, the master class can be viewed on the video:

All patterns in the quilling technique are performed in a similar way. You can prepare details in the form of droplets of different sizes and make a hexagonal Christmas tree with your own hands. They are glued to the rod or simply strung on it through free holes.

How to make a Christmas tree from paper circles

For the manufacture of a multi-tiered Christmas tree, colored paper is used. Cut several circles of the same size, fold each in 4 times and cut off the top. Then you need to form folds in the form of an accordion. After that, string all the details onto the rod. As a base, you can use a coil or cork.

Technique for making a fan for decorating a Christmas tree

For the manufacture of this Christmas tree, be sure to involve a child. At first glance, the work does not cause difficulties, but perseverance and patience are important here. You should first prepare several circles in the form of a fan, which are then strung on a thin rod. You can simply glue each circle to the previous one without a rod, the design will still turn out to be strong.

For the manufacture of the Christmas tree, all work is performed as follows.

Cut a long strip of paper, newspaper or magazine, fold it into an accordion, cut the corners and the middle.
Roll up in the form of a ring, glue the ends, pull the thread with a needle through the middle.
Gently pulling the thread, lay the workpiece in a flat circle. To get convex edges, put a small object in the middle, it can be a spool of thread.

Each tier should be slightly smaller than the previous one, for this it is necessary to make the strips narrower.

Christmas trees made from cardboard tubes from toilet paper

In the manufacture of this New Year's tree, only one difficulty can arise - to find the required number of toilet paper bushings. If this question does not complicate you, all cylinders should first be painted with green paint and installed in the shape of a tree. You can fix them with double-sided tape or a glue gun. Additionally, you can put a Christmas tree decoration in each detail and decorate the finished product with tinsel and a garland.

Summary: How to make a Christmas tree with your own hands. Original Christmas trees made of cones and tinsel. Photos and templates of Christmas trees made of paper. Homemade origami Christmas tree. Candy tree.

Even kids can take part in preparing for the New Year and making New Year crafts with their own hands. For example, even a two-year-old can make a Christmas tree from an ordinary cone and plasticine. You just need to teach him to roll balls of different colors from plasticine and fix them on the cone. The base of the Christmas tree is a spool of thread wrapped in foil.

Here are more complex options for Christmas trees made from cones. In the first case, the bump was painted with acrylic paint in green and white. In the second version, the pine cone was decorated with beads.

From a large number of cones, you can make such a Christmas tree with your own hands. The basis for the Christmas tree is a cone made of thick paper or cardboard, which is then pasted over with cones on all sides with a glue gun. Decorate the finished Christmas tree with beads and large beads.

Another very simple homemade tinsel Christmas tree. You can make it in literally five minutes.

To do this, you need to make a cone out of cardboard and stick tinsel on it in a spiral.

Candy tree. DIY candy tree. How to make a candy tree

If, before wrapping a cardboard cone with tinsel, you can fix sweets on the future Christmas tree with adhesive tape, you will get a sweet Christmas tree made of sweets. For a detailed New Year's master class on how to make a Christmas tree from sweets, see the photo below or follow the link. When creating a Christmas tree from sweets, it is convenient to use double-sided tape.

A large number of Christmas trees can be made with your own hands from paper. Let's start with the simplest Christmas crafts.

DIY paper Christmas trees

DIY Christmas tree made of paper (option 1)

Print on thick paper or cardboard and cut out the blanks with scissors >>>> Bend each Christmas tree in half and glue them together. This Christmas tree is made according to the same principle as the Christmas ball from our previous article. See link >>>>

According to the same principle, openwork Christmas trees are made from the Country of Masters website.

Epson's Singapore site offers ready-made Christmas tree templates:

DIY Christmas tree toy (option 2)

If you have an unnecessary cardboard box, then you can make such a Christmas tree out of it using the same technology.

DIY Christmas tree toy (option 4)

And you can make a curly Christmas tree by pasting the base-cone of cardboard with strips of twisted paper.

DIY Christmas trees made of paper (option 10)

To make such a Christmas tree, you must first cut out circles of different diameters from paper. You will also need a wire and a stand, which will be successfully replaced by a half of a large "kinder surprise". The Christmas tree is easily assembled on a wire, and, most importantly, it is easily disassembled. See link >>>>

Origami tree from a magazine

This origami Christmas tree is very easy to make with your own hands. Small format magazines that can be found in any home are suitable as material.

Work plan:

The procedure described below must be done with each page in the magazine. If the cover is thick, you can simply peel it off (tear it off).

1. We bend the page, the upper right corner, at an angle of 45 degrees to ourselves.

2. Once again, fold the sheet in half diagonally.

3. We pass all fold lines with a fingernail or other object so that they do not open, especially thick pages.

4. The lower corner, which goes beyond the boundaries of the magazine, is turned up.

Thus, we add up all the pages in the advertising magazine.

The result is a cute origami Christmas tree.

Origami tree from a magazine

Another model of origami Christmas trees from for the New Year. Unlike the previous origami tree from a magazine, the pages here do not fold, but are figuratively cut out according to a template.

The manufacturing principle is very simple. It is necessary to prepare a half-Christmas tree template, circle it on one page and cut it out. Further, the cut page will itself be a template for other pages. You can cut several pages at once, but you should not cut a lot at once, as the cut line will turn out to be uneven (jammed) and the tree will not open well.

The tree itself turns out to be more one-sided; to achieve volume, you can fold and glue 2-3 magazines together. But trust me, she looks good.

Christmas tree origami from modules. Modular origami tree

Assembling a Christmas tree from triangular origami modules is not at all difficult. It consists of individual branches, so you can make Christmas trees of a wide variety of shapes and sizes. In addition, from such branches you can make New Year's compositions, make toys, snowflakes, stars. See the New Year's master class at the link >>>>

Christmas tree coloring on the wall

Large Christmas tree coloring on the wall. Separate parts of this New Year's beauty must be printed on 22 A4 sheets and pasted on the wall in the correct sequence. The advantage of this New Year's paper craft is that the Christmas tree is made in black and white, so the printer's ink consumption is small. In addition, this Christmas coloring book with many small details will captivate the child for a long time. Link >>>>

Do-it-yourself Christmas tree from napkins

A master class on making a very beautiful, unusual Christmas tree from napkins can be found at the link >>>>

How to make crepe paper Christmas trees

The Land of Masters website invites you to make two Christmas trees with your own hands from corrugated paper.

Option 1. Candles and the Christmas tree itself are made of corrugated tubes. Link >>>>

The original Christmas tree-beauty will decorate the festive interior. Of course, a round dance around her is not to be led, but such a miracle will certainly raise the mood. Here is such an interesting desktop craft that can be made from the simplest things that are in every home.

Necessary materials:

A4 sheet, cardboard;
dense threads (preferably wool mixture);
2 "yolks" from kinders;
wooden sticks for sushi;
plasticine;
Styrofoam;
stationery knife;
stroke corrector;
red nail polish;
PVA glue;
fabric scraps;
little things for decoration.

Make the frame of the future Christmas tree from A4 sheet - fold it into a bag. Insert the foam inside.

Apply glue to the surface of the cone in not wide strips and wind the thread around it.

Secure the end of the thread with glue.

Sushi sticks will serve as the legs of our beauty. To do this, they need to be painted with a proofreader.

While they dry from the "yolks" make boots, as shown in the photo.

Fill them up to half with plasticine and wrap with a cloth.

Insert stick legs into boots, decorate the Christmas tree with various bows, ribbons. Paint the legs with stripes of red varnish. ready!

You can make a hat out of cardboard, cover it with a cloth and sew on a pompom.

DIY shabby chic Christmas tree

Let's make such an amazingly beautiful and original craft in a trendy shabby chic style.

Necessary materials.

For the base, we take a large paper cup or any plastic utensils. Separately, we dilute alabaster or gypsum with water to the density of liquid sour cream and pour it into the future pot. We fix the trunk of our tree, plant a branch in the center and fix it in this position until it hardens.

We make a cone out of cardboard using a stapler.

We make the top of the spruce from wire and foam rubber.

We connect the top with the trunk and attach the cone.

We wrap the base of the tree with white fur.

Cut off excess from below.

Then we fold the ends of the burlap inward and attach it with hot glue.

Let's get down to the fun part - decorating our Christmas tree in the shabby chic style.

To create a finished composition, we need a stand.

We make a bench from a bamboo napkin.

From white fur - a snowman.

We attach a bell to the top of the spruce.

We decorate the Christmas tree with beads, pearls, flowers, lace, etc.

We apply transparent glue to the very top of the tree.

And sprinkled with artificial snow.

We do the same with the bench.

Our composition "Winter's Tale" is ready!

Decorative Christmas tree made of napkins

We will make it from cardboard and single-layer napkins. You will also need beads for decoration.

First of all, we will build a frame for our Christmas tree. We fold the cone from cardboard, fasten it (I sewed it with threads) and cut exactly the bottom of the cone so that it can stand.

The base is ready, set aside for now. Now let's move on to napkins. From them we will make roses. Single-layer plain paper napkins are suitable for us.

We take a napkin and cut it along the folds. Then fold it in three and cut along the folds again.

The resulting strips are still tripled and cut again. We got a square equal to 1/9 of the napkin.

We fasten this square in the center with a stapler.

Then cut out a circle from it. Mega-accuracy and accuracy are not required here at all, the finished rosette can be slightly corrected with scissors.

Thus, a rose is formed. If the finished rose seems uneven to you, then you can trim it with scissors.

The number of such flowers depends on the size of your cardboard cone. My Christmas tree turned out to be 21 cm high and I needed 59 roses for it.

When all the flowers are ready, we return to the cone. Starting from the crown, glue the flowers onto the cone so that the base is not visible. I glued it with hot glue (it’s more convenient for me), but the most ordinary PVA will do.

I made a Christmas tree from napkins in two colors. If you also decide to create your own craft from multi-colored roses, then you can safely experiment with their alternation on the cone. If the result does not suit you, you can always tear off the flower and re-glue it to another place. In this case, only the lower layer of the flower will suffer. It (the bottom layer) is simply torn off. The rosette will not lose its appearance.

So, we glued the flowers to the cone. The Christmas tree itself is ready and you can stop at this stage.

I also decorated it with beads - I glued it on the same hot glue, here PVA will no longer help.

DIY decorative Christmas tree made of napkins

As you can see, even a beginner can make such beauty, so you can safely involve children in the process.

Another version of the Christmas tree from napkins

Craft from cones, balls, ribbons and beads

How to make such a craft - see the video tutorial at the end of the article.

Christmas tree made of plasticine with sweets

What do we all associate a wonderful New Year's holiday with? With the smell of pine needles, bright lights, garlands, sweets. And children still create unusual crafts with their own hands, thereby bringing a pleasant moment of the onset of a fabulous night. Lessons of creativity of such subjects they like most of all. It is in crafts that you can realize any fantasies.

We offer to make an elegant Christmas tree, which is easy to decorate with sweets. Blind crafts from plasticine - the cheapest and most popular material. You will definitely make a beautiful souvenir if you follow our tips - they are simple.

To sculpt a Christmas tree with your own hands, prepare:

green plasticine for the crown;
a stump in the form of a cap or an empty spool of thread;
toothpick, red and white plasticine for sweets.

Choose a green block of plasticine from the set. The body of the Christmas tree itself will be made from it, and in the future we will make small sweets as toys. Of course, a small souvenir does not have to be green, any other color that you choose at will will do. If you manage to find a set for sale that has a gold bar, then this option will look rich.

Thoroughly knead the entire prepared bar in your hands and prepare for further work. It is necessary to form a cone-shaped crown, and not quite the usual even, but curved, similar to the cap of a fabulous gnome. Since we are talking about a magical holiday, it is not forbidden to fantasize and create something incredible.

Pull all the soft plasticine into a long cone. Sharpen the upper part as much as possible, press the lower part along the circumference with your fingers, showing the skirt. Then take and bend to the side the entire structure. Sometimes Christmas trees do not stretch up perfectly evenly, but lean to the side like this.

To model Christmas tree decorations - small sweets - use white and red plasticine. Form red round pills (the inside of the candy), as well as white triangles (the twisted part of the candy wrappers).

Glue delicious sweets. Glue a white dot on each red circle and push in the center with a toothpick. Glue triangular pieces on the sides.

Make enough decorative details to fill the entire surface of the Christmas tree, evenly distributing sweets around the circumference at some distance.

Glue all the resulting blanks to the crown. A beautiful Christmas craft is almost ready. From below, press down a small lid - a stump (or mold it from plasticine).

And the top is still missing. She asks to complete the resulting fabulous Christmas tree. Come up with some option, for example, the same spruce branches in combination with red berries. All this looks festive and bright.

This is such a fantastic Christmas tree. This is an elegant version of crafts for the New Year, which will be a great gift for your favorite holiday.

The New Year is just around the corner - you need to hurry up to catch everything.

How to make such a postcard.

Do-it-yourself Christmas tree made of felt

Let's make felt Christmas trees - this is a great Christmas decoration and perfect for school or kindergarten.

Prepare for them:

A set of colored felt;
cotton wool;
glue "Moment" transparent;
any beads;
threads for knitting and sewing;
needle
scissors;
felt-tip pen.

Choose the right colors for the felt. It can be different shades of green. Or you can show your imagination and make an unusual red or blue spruce. Fold a couple of sheets of felt together, draw the shape of a spruce on the top.

Cut a piece of patterned felt along the entire length and fold it in half as shown in the photo. We do this only if the felt is not very thick, otherwise it will be difficult to cut 4 layers at once.

Cut out 4 blanks.

To give them a bulge, put some cotton wool, as shown in the photo.

Lubricate the edges of the workpiece with glue.

Cut a piece of knitting thread and attach it to the top of the workpiece, directly on the glue. For him, it can be hung. Attach the second blank and press along the edge so that both parts stick together.

On a light Christmas tree, make stitches with threads of a darker green color. This will add originality to the craft.

Decorate the second with a border of pearl beads. To do this, make a layer of glue along the edge and put beads on it.

Now let your kid decorate them however he wants. After drying, the craft is ready for use.

Such a simple craft will be a great decoration for your Christmas tree. It can be given to grandparents. Older kids can do it completely on their own. By this principle, you can make any decorations from felt. Anything your imagination tells you.

From natural materials with flowers from foamiran do-it-yourself video lesson

Herringbone-sachet - to create a festive aroma

A sachet is a small bag filled with dry fragrances that is used to create a fragrant background in a wardrobe or chest of drawers. If you put such fragrant bags on the shelves with things, then a pleasant and subtle smell will settle in your closet.

It will not be difficult to make such a sachet with your own hands, and if you create it in the form of a Christmas tree, then in addition to the aroma, the festive composition will also set the appropriate mood.

Materials for the master class:

Peel from citrus fruits;
essential oil of orange;
thread, needle;
beads, beads, sequins;
satin ribbon;
green fabric, cotton;
scissors and pencil.

On a sheet of paper, draw a spruce template and cut it out.

Finely cut the peel from citrus fruits, and to give more flavor, you can also add a few drops of essential oil.

From a thin green cotton fabric, cut out two blanks according to the template, fold them with their right sides inward and sweep.

If possible, sew and process the edge on a sewing machine, but if this is not possible, process the edges by hand.

Turn out.

From a silver thread, make a loop with a voluminous knot at the end, use a needle or a hook to thread the loop into the top of the spruce.

Tie a satin ribbon into a bow and secure at the top with a couple of stitches.

We fill the craft with fragrant peel from citrus fruits, sew the edge.

If desired, do-it-yourself Christmas tree-sachet can be decorated with different beads and sequins.

Our affordable and easy-to-make sachet is ready, now its aroma will delight, and its beautiful appearance will give an unusual and festive energy.

Photo of Christmas tree-sachet with orange flavor

Pasta tree toy

Of course, you can not do without a Christmas tree. Someone will install a real forest beauty, someone will put an artificial one. But besides the big hero of the occasion, you can make several small Christmas trees, arrange them in rooms. Let the holiday be felt throughout the house!

You can make a Christmas tree at home from any material, from sweets to books. Today we will talk about how to make a symbol of the new year out of paper. Simply put, we take scissors, glue, paints ... and proceed.

Using colored paper, you can make a Christmas tree of various modifications, from flat to voluminous. Yes, even a whole forest of spruce!)

This beauty is very easy to make! We need a sheet of colored paper or cardboard and scissors. Cut out the square and bend it as shown in the picture.

And the final step:

New Year's decor is ready!

And the easiest option is to cut out two identical blanks from colored paper. After that, we bend them along and glue them together. The result is such a tree. Decorate it to your liking.

Another easy option. We make a cone from colored paper, decorate it and get a stylized Christmas tree.

Another simple option for making a stylized Christmas tree. Cut out a triangle from paper. We take a suitable wooden stick, it will be a tree trunk.

We attach a base to the trunk so that the future tree stands vertically, for example, a cork or a piece of plasticine. Now we string the paper on a stick, like a sail on a ship. And here is the result.

Is it original and wonderful?

We make a Christmas tree from corrugated paper with our own hands step by step

For this craft, you will need corrugated paper and cardboard. Paper can be selected in any color to make the New Year's decor unusual, and combined with your interior.

Watch in this video a master class of 5 step-by-step options for making Christmas trees from corrugated paper for the New Year 2019:

And now we will describe the manufacturing process in a few words and photographs.

We cut out a sector from cardboard - two quarters of a circle and glue it into a cone.

The cone will serve as the trunk of the future Christmas tree.

Now let's start creating an analogue of branches and needles. Here you can go in several ways. You can make Christmas tree branches in the form of a belt around a cone. To do this, cut a strip of paper five centimeters wide, and long enough to completely envelop the cone. We thread the thread along the inner edge of the strip that will be adjacent to the cone, stepping back from the edge by half a centimeter. After that, we turn the strip into a circle.

We make several such circles, and all of them should be different in size - one is smaller than the other. After all, they will dress on a cone like rings on a pyramid: first a large ring, then a smaller one, etc. So we put them on a cone. It turns out something like a "skirt".

So that the rings do not fall off, glue them to the cone. As a result, we get such a beautiful Christmas tree.

Instead of a cone, you can use a wooden rod, on which we string circles made of paper.

We make circles in the following way. We take a strip of paper and fold it with an accordion. We fix the thread in the middle.

After that, we unfold it with a fan.

Now take the two halves and glue them together to make a circle. We also make circles of different sizes.

We string them on the rod, starting with the largest and ending with the smallest. As a result, we get a Christmas tree.

The process is more laborious than the previous options, but the result is wonderful.

How to make a Christmas tree out of paper napkins

Christmas tree made of paper napkins looks very beautiful. Here, just as in the variant described above, a cone is used as the basis. However, roses made from napkins are glued to it. As a result, we get:

We take napkins, put them in a pile and fasten them with a stapler in the center. After that, cut out a circle from them.

The first layer and crush to the middle. Then we do the same with the next layer.

And in this way we make all the layers, so that the result is a rose.

There will be many such roses to be made. How much is hard to say. It all depends on the size of the base - the cone.

Now we glue the finished roses to the cone, starting from the base to the top. We decorate with beads and as a result we get a beautiful Christmas tree.

Paper Christmas tree - options for making a paper tree

Here is an option for making a Christmas tree out of paper, which is suitable for young children. The fact is that the Christmas tree is made from the contours of a child's palm.

We twist a cone out of cardboard. Next, take a green sheet of paper and a child. He puts his palm, outline it and cut it out. You will need a lot of these palms. Now we take the cut out palms and glue them to the cone. It turned out to be a wonderful tree.

Continuing with the cone options:

As you can see, the cone is good in any form).

You can use wrapping paper.

And how do you like such a stylish little thing from old glossy magazines?

It is made easier than a steamed turnip).

Another very simple appliqué style option that a child can easily make. We take a sheet of colored paper as a background. Next, we need several sheets of different colors. Cut them into strips of paper about half a centimeter wide. Their length is different: the first is long, each subsequent one is somewhat shorter than the previous one. We cut it, now we glue them on the background sheet. Glue an asterisk on top. The craft is ready.

Below is a video that shows how to make Christmas trees out of paper.

Christmas tree from newspaper tubes

A Christmas tree can be made from any material. One of the simplest is the newspaper (although they are already disappearing from our lives). Tubes are rolled from it, and then intertwined with each other. As a result, we get such a craft.

You can't tell right away that it's made from a newspaper. The tubes can be painted in any color and the Christmas tree will be colored.

It all starts with the fact that we make a large number of tubes. To do this, take a wooden stick and twist a newspaper sheet with it. Lubricate the edge with glue so that the tube does not turn around. We make a cone out of cardboard. We put it on a sheet of paper and start weaving. Glue the first row in the form of a pentagon.

Now take the bottom tube and put it on top of the other. We take the next lower one and put it on top again, and so on.

Thus, twisting the tubes, we raise the "braid" to the very top.

We cut off the long tubes remaining at the end and attach a star top made separately.

The Christmas tree is ready. You can leave it white, or you can color it.

There is another way to weave:

And another tree model:

We make a Christmas tree from origami modules according to the scheme

One of the options for making a Christmas tree is to make it using the origami technique. Of course, this option is somewhat more complicated than all those described earlier, but the result is very impressive.

First you need to make modules. To do this, use the following diagram.

Such modules for a Christmas tree 20 cm high need to be made approximately 650 pieces. Done. Now we collect branches of the Christmas tree. We fasten the modules as follows: In the first row - 2 modules, in the second - 1 module.

We assemble the third row by attaching two more modules to the corners of the module of the second row. We insert into pockets located nearby, as a result, the outer corners will stick out to the sides.

We collect the branch, alternating in each row, first one, then two modules.

We make such branches or five, or ten. The splendor of the Christmas tree depends on their number. Now we glue the branches with each other, forming a circle.

You need to make several such circles. Depends on the height of the tree. For the barrel, use a wooden skewer or stick. We stick it into an eraser, plasticine, polystyrene - what is at hand.

Now we put the finished Christmas circles on a skewer. Glue the first row to the base. Then each subsequent row is glued to the previous one.

Having collected the whole Christmas tree, we make decorations for it. Below is a diagram of assembling another version of the Christmas tree from ready-made modules.

How to make a Christmas tree out of paper at home

Below I will give some rather interesting options for making a three-dimensional Christmas tree. The first option - the Christmas tree is made from paper strips folded with a ribbon and dressed on a stick-trunk. We collect according to this scheme.

In the second option, we take a blank sheet of paper: white or colored - green. We bend it in half and draw the outlines of the Christmas tree. You can use these stencils.

Or like this.

For one Christmas tree - three stencils. Cut along the lines. After that, all three blanks are glued together and we get such Christmas trees.

And, finally, the original version of a large Christmas tree that glows from the inside. For its manufacture, cardboard boxes are needed, from which we make pyramids. We dress each other. We put a lamp inside. As a result, we get such an original design.