Christmas tree made of cardboard and colored paper. Master class on making a paper Christmas tree with step by step photos. New Year's beauty from fabric

In autumn, you often begin to think about the coming of the New Year with its festive mood, meetings with friends and family, and, of course, gifts. In addition, the New Year has been associated with the Christmas tree for all of us since childhood! Let's talk about her.)

Fortunately, people are increasingly thinking that it is not worth cutting down a living Christmas tree for the sake of a few holidays. "Cross" and I fully support this decision and believe that a do-it-yourself Christmas tree is much more interesting and humane! In addition, these are great options for those who have nowhere to put a large Christmas tree (for example, there is no free space, or an active small child is in this free space).

We bring to your attention a large selection of master classes on creating a decorative Christmas tree with your own hands, which will serve as a wonderful decoration for your home and an original gift for a wonderful holiday!

Christmas tree made of cones

A very original Christmas tree with your own hands can be made from pine cones. But we will not use the whole cones, but only their scales, so that the Christmas tree is not too bulky.

So, to begin with, we will separate its scales from the cone. This can be done with a sharp knife, wire cutters or secateurs.

Be careful, take care of your hands!

The next step is to make a cone from thick paper or cardboard, which will be the base of our Christmas tree. We turn the paper into a cone, glue it on the side and cut off the excess at the base.

Then we just take the scales in our hands and glue them in a circle, starting from the base of the cone.

You can glue each new row in a checkerboard pattern, you can, as here, one above the other.

You can glue a clove on the top of the Christmas tree (such a spice))

After the glue dries, you can start painting our beauty. To do this, you can take spray paint or regular acrylic paint.

If you choose acrylic paint with a metallic effect, then your Christmas tree will look much more spectacular.

Then we cover the ends of the "twigs" with PVA glue and sprinkle sparkles on them.

This beauty is obtained as a result of these uncomplicated actions:

Exactly according to the same principle, you can decorate the cone with chains and beads, decorative cords, ribbons, braid, etc.

Another very popular way to make artificial Christmas trees with your own hands is to weave them from beads. This is perhaps the most painstaking way, but for lovers of beading, nothing is impossible!

The detailed process of weaving Christmas trees from beads cannot fit in one article, so we share with you links to master classes previously published on "Cross".

Christmas tree made of paper and cardboard

If you have nothing to do in the workplace) or just want to add a little holiday to the office, make a Christmas tree out of paper. What's easier?)

And this Christmas tree is very similar to the design one, don't you think? It’s all because of the colored designer cardboard, which is so beautiful and bright that you don’t need to decorate the Christmas tree with anything else) which simplifies the process of making a Christmas tree with your own hands.

Secondly, for the manufacture of a designer Christmas tree, you can use threads that are wound on a paper cone using the technology for making openwork balls.

Thirdly, flower netting and bouquet netting.

The manufacturing technology of these three Christmas trees is very similar, so the process of their creation is shown in one master class.

Feather Christmas Tree

Yes, they do too! You can buy feathers in hardware stores, or maybe you have stocks of bird feathers? For brightness, they can be dyed with food coloring. It looks original, beautiful and so airy!

Click Class

Tell VK

We continue to decorate our home for the winter holiday. We have already made various ones, hung them on windows and walls. Now we want to give the holiday symbolism. And this, of course, is the main princess of the celebration - the Christmas tree. I know that many feel sorry for the trees and replace them with artificial counterparts. But sometimes you just want to make something with your own hands in order to get satisfaction from the action and accent in the decor.

All craft ideas are easy to do with the kids. To make it easier to do the job, make the basics in advance. And try not to skimp on decor. Buy more different beads, ribbons, ribbons, beautiful buttons. Collect small toys from kinders and decorate with them. And they will go into business and will not wallow.

You can create beauty from everything that is at hand. The main thing is to attach to this a share of imagination and all your accuracy. With modern devices, such as a glue gun, you can give the product original shapes and fix different textures and materials.

I know that wine bottle corks and ice cream sticks are also used. Well, we didn’t have any traffic jams at home, and the sticks have long been sold for different needs, so let’s move on to materials that any housewife will definitely have - pasta and yarn.

Let's start with pasta. I know that various snowflakes are made from them. It turns out that they are also suitable for the Christmas tree.

We will need:

• A pack of pasta (better to take feathers)
• glue gun
• Cardboard sheet
• Dye
• Decor

It is better to prefer the shape of "feathers" or "spirals". Choose a good manufacturer so that all the things are even and the same length.

First of all, we glue a cone out of cardboard. I do this by simply twisting the sheet around my hand. To prevent the workpiece from falling apart, we fasten it with a stapler.

And now we cut the base so that the tree stands straight, and not crooked.

We always start from the bottom. “Lay” the first two rows, i.e. glue them so that they lie on the surface, so the product will be more stable.

And the next rows need to be raised exactly on the previous one by an amount equal to half the “spiral”.

When you finish the top, we begin to cover the entire craft with paint.

You can take green, or you can buy gold or silver paint in a spray can. Only then you need to spray it not at home.

I really like the result. It doesn't take much time, but it looks very elegant.

Now it's the turn of yarn and cord.

To make a Christmas tree out of yarn, you need to wind the thread exactly one above the other on a paper cone. Periodically fastening it with hot glue to the base.

Decorate with decor.

This product is made even faster than pasta.

You can decorate them with buttons.

We will need:

• Wire
• Decor

First, we select the wire. It should be firm and not thin. From it we turn a cone-shaped spiral. We check for stability. The bottom can be wrapped twice.

We begin to string the cord on the wire.

Dry and decorate.

Glue will give the structure additional strength and will not allow the cord to slide down the frame.

Volumetric Christmas tree made of paper

Paper is always the first thing that the word "craft" is associated with. And from it you can create not one Christmas tree, but a whole spruce forest in which not a single tree will be repeated!

Let's say we want a paper tree to delight us on the kitchen table. Then you need to make it fluffy and voluminous. And also the most stable.

So, I picked up a few detailed master classes with a clear description of the process.

Option 1

We will need:

• cardboard cone
• Paper of green color of different shades.

We cut out many circles of the same size from paper.

And we begin to glue their edges to the cone, observing the rows.

The first layer always goes at the base.

This craft is available in terms of difficulty, even for a two-year-old child. And it looks quite rich because of the different shades of the same color.

Option 2. Terry cone herringbone

Cut out 4 half circles. Each of them is smaller than the previous one in diameter by 2 centimeters.

We glue the blanks into a cone and cut the edges around the perimeter a little to get the volume. Fold the terry edges a little.

Now glue a smaller cone on the largest workpiece. And so in the direction of decreasing.

That's the whole easy process.

Option 3. Let's make a Christmas tree from paper circles

Cut out 4 circles. Each of them is 1 centimeter smaller than the previous one.

Then we fold each circle 3-4 times in half.

We also make the base out of paper. You can wrap green paper around a pencil or a kebab stick.

We string round blanks on the barrel in descending order of size.

To give stability, you can plant the trunk in plasticine, wax or a wine cork.

Option 4

We mark 15 circles, each time reducing the diameter by 1 centimeter. Then we divide each circle into 12 equal parts, drawing lines through the center.

From the center mark half the radius and draw a circle. Now we cut the lines clearly to the drawn circle.

Glue the tips on each petal.

When you have completed all the levels, start collecting the Christmas tree from the widest row to the smallest.

How do you like the ideas, I think that you will find ideas for yourself.

Craft from cotton pads for the new year in kindergarten

The child was taken aback by the task that tomorrow you need to bring crafts to kindergarten? And outside the window, of course, it is already night. Then you can use the packaging of cotton pads. In most families, they are actively used.

We will need:

• Packing of cotton pads
• Cardboard for the cone base
• PVA glue
• Decor

We fold the cardboard frame, connect the edges with a stapler.

Take a cotton pad and fold it in half.

Then, on a harmless PVA glue, we plant two tips of a cotton semicircle.

And we glue the workpiece to the base, after smearing its fold with the same PVA glue.

So we do row by row. It is better to glue cotton pads closer to each other so that there is a minimum of gaps.

It remains only to decorate the delicate beauty!

Children in kindergarten will definitely like your product, and they will not be ashamed in front of other parents.

DIY craft from napkins

Another very affordable material is napkins. You can use the most inexpensive and monophonic.

We take white, red, blue and green festive shades.

We fold the napkin several times to get the shape of a square, then cut the fold points and cross-fasten the middle with a stapler.

Now we bend each layer, forming a pompom.

Lay out the first row on the frame with these balls. Then we glue balls and other Christmas tree decorations on double-sided tape.

And fill the entire surface of the frame with napkins.

Everything is pretty fast.

By the way, you can see how to make from napkins here. It also turns out very nice.

Candy Christmas tree

A wonderful gift would be a candy craft: buy a box of good candies in a beautiful package at the grocery store.

It is made of two parts - a base for sweets and a barrel.

We glue the base with a side of 23 centimeters. When cutting, indent along the bottom edge and at one edge 1 cm. We will apply glue to them.

We decorate with beautiful paper or film. Glue the bottom to its base.

We make the trunk, decorate it and glue it with the frame.

Now we evenly put sweets, braid or Christmas tree beads on the hot glue.

Use the same color scheme for the base and candies.

We make a Christmas tree for the New Year from pine cones

Natural material always gives the desired zest to the decor. It immediately smells of freshness and resin at home. Will give a symbolic meaning to this winter holiday.

Cones are also suitable for various crafts.

You can create a Christmas tree from only cones, or you can dilute them with sisal balls, decorative flowers or fir branches.
The combination of cones and dried citruses also looks unusual.

Glue the cones onto the base with hot glue. You can not think about the side that you have them. This will give a slight bewitching negligence to the product.

We alternate cones with Christmas balls or other decor.

We cover with artificial snow or white enamel from the sprayer.

Everything is quite easy, and the result is incredibly beautiful.

Light tinsel Christmas tree

We can't imagine the New Year without tinsel! There are no decorations on it now: stars with balls, and multi-colored tips. It decorates windows, curtains, walls and, of course, is used as a material for crafts: wreaths and Christmas trees.

Since most tinsel manufacturers thread it on a thin wire, it is easy to bend and shape in all sorts of ways.

A spruce tree is made from it in three minutes!

We will need:

• Tinsel
• Cardboard sheet
• Double sided tape.

From cardboard we make a base in the form of a cone and glue it with double-sided tape.

We remove the protective film from the first row and begin to glue the end of the tinsel, tightly wrapping the frame.

If you didn’t have enough tinsel, then glue the end with tape, and put the next fluffy ribbon of the same color on top of it.

Fluffy pom-pom beauty

Pompoms have also long been loved by our craftswomen. Previously, we made a dog out of them, now we will create a fluffy beauty.

The balls themselves can be made in two different ways: by winding 20 layers on a fork or using two round blanks.

We will go with the second method.

We take cardboard or plastic, cut out two identical rings.

Now stepping back from the edge of the thread 5 centimeters, we begin to wind the yarn very tightly.

Then cut the outer fold between the blanks.

With the thread end left, we tie the middle of the pompom so as not to lose all the threads.

Now we are looking for a thick wire and turn it into a spiral. Leave the base wide. We string pom-poms on it.

If the wire is not found, then we use the experience of previous products and form a triangular or conical base.

Felt Christmas Tree Ideas

Felt is also popular with our craftswomen. No matter what they do, educational toys and Christmas tree decorations. Today I will give a few ideas for creating a spruce tree.

From the simplest options to the most complex.

Option 1. Cut out 10 Christmas trees of the same size from felt. Fold in half and glue the fold to the trunk.
We use branches, saw cuts of trees (preferably spruce or pine).

Option 2. Cut out many identical triangles from felt.

Glue them to the frame in rows. The upper triangle lies between the two lower ones!

Option 3. We prepare 5 squares of different sizes: 9 cm, 7 cm, 5 cm, 3 cm, 1 cm.

We make five of each size.

Now we string the largest squares onto the thick one, distributing them diagonally to each other so that there are no voids.

We pass all the squares like this.

New Year's beauty from fabric

And two more ideas of fabric beauties in the piggy bank. The ends can be finished with a decorative stitch with a thick contrasting thread. Sew buttons or beads onto symbolic branches.

Use several colors of fabrics and textures. For example, take velvet on one side and linen on the other.

You can also choose different patterns in the same color scheme, or vice versa, play with companion flowers.

You can fill the Christmas tree with holofiber, synthetic winterizer or cuts, the remnants of your creativity.

If the product is small, fill it with cotton wool.

My dear, I tried to find for you the most interesting and affordable materials for creativity. I'd love to hear your opinion in the comments!

tweet

Tell VK

Haven't decided what is the best present for your family and friends or how to decorate your interior? We will help you. You can create a wonderful craft without putting much effort and without investing a large amount of money with your own hands. Let's make a Christmas tree out of cardboard. It's simple, fast, unusual, beautiful. Treat yourself and those around you. Check out detailed instructions with photos.

To work you need:

• a sheet of paper (the size depends on how big the Christmas tree you want);
• 2 sheets of thick cardboard (same dimensions as paper);
• white acrylic paint (or any other resistant and thick);
• green and white gouache (or other thick resistant paint).
• glue Moment (or any other, well-setting and gluing high-quality elements);
• decorative elements (cotton wool, beads, stars);
• stationery knife,
• scissors,
• brushes,
• sponge.

Step-by-step instruction

1. Let's get started. Let's take our sheet of paper, we remind you that its size depends on your desire. The more, the higher and more magnificent your craft will be. Fold the leaf in half.
2. After we folded the sheet in half on one side, draw the outline of the future figure near the fold. You need to draw only half of the spruce, you can be creative and make the stem wider or thinner, more branches or less, it all depends on you and your desire. Then we do not open the sheet, but cut out our stencil along the drawn contour. We got the symmetrical outlines of our crafts. Our main preparation is ready.



3. Let's move on to cardboard. Let's circle our blank on a sheet of cardboard. If the cardboard is thick and will keep its shape well when painting our figure (when painting, the cardboard is wetted, softened and can be deformed), then we cut out 2 figures. If in doubt that your cardboard can withstand painting and not deform, cut out 4 figures. If you cut out 4 figures, then you need to glue every 2 stencils to each other, thus getting 2 Christmas trees. Glue with glue after complete drying. After applying glue and figures to each other, you can put them to dry under pressure so that the shape does not change, remains straight. (e.g. under a stack of books)



4. Now we need to give our Christmas trees volume. Mark out the two resulting shapes (one from the top to the middle, the other from the bottom to the middle). We made figures 20 cm high, so our markings will be 10 cm each (exactly half of the figure), the strips also need to be marked in width (the width of our leg is 6 cm, therefore, the strip will be starting from 3 cm from one edge of the leg). We cut out the resulting markup with a clerical knife along the previously drawn stripes.
5. Then we put our blanks into each other to get a three-dimensional shape with 4 branches from different sides (we put it together like a puzzle). Let's start coloring. We paint over our workpiece with white acrylic paint, completely smearing it on all 8 sides and not sparing the material used (we can say we primer, create a base for the final color). If you do not have acrylic paint, then take any other thick, resistant, bright and well-kept color.



6. After waiting for our white layer to dry, we move on to our real color for the beauty. Now we overlay a beautiful green. Also, we do not regret the material, but we do not overdo it either. It is necessary that the color was uniform, saturated.
7. After our green base has dried out, we move on to the volume. We take any sponge. Pour the paint into any bowl, or you can get it wet right in the cone. We moisten the sponge in light green paint (it can be obtained by mixing our green and white paints) and distribute it over the Christmas tree with dotted movements. It turned out a beautiful effect of needles on our branches. Let's further sprinkle our beauty with snow. We take a brush, fluff it, dip it in white paint and with light strokes, barely touching our figure, so as not to overdo it, we apply white paint. This should be done without much effort. After drying, our Christmas tree will get the effect of snow.
8. Then comes the moment of your most important creativity. We move on to decorating our Christmas tree. We showed by example how to decorate with beads. We glued them on glue Moment. You can paint over the beads with a little white paint on top (as if they were covered with snow). We will decorate the other side of the Christmas tree with other decorative elements (we took stars of different sizes and colors). When turning in the wind (if you end up hanging it on a real Christmas tree or in the interior), it will be interesting to look at different sides of your work, which differ in their design. To give a greater effect of snowiness, glue a little cotton wool.

Our cardboard Christmas tree is ready! She is like a real one - a snow-covered beauty in the middle of the forest. Show your creativity, add something of your own to our interesting ideas created especially for you. Please your eyes and those around you for the New Year with your crafts.

In December, a brisk trade in Christmas trees will open on the city streets. It would seem that we should rejoice at such an abundance of New Year's bazaars, but often we feel sincerely sorry for the green beauties, cut down at a time when they had just begun to grow. Fortunately, now many people are purchasing artificial plastic spruce trees or even making them at home from the most unusual tools at hand - lemonade bottles, balls, tinsel, cones, and even books! Today we will share with you new information on what and how to make a Christmas tree with your own hands for the New Year 2018, how to decorate it, what crafts you can bring to school and kindergarten for the competition. From our master classes with step-by-step instructions and photos, you will learn how to make a green miracle from paper and cardboard, cotton pads, threads and ribbons with your own hands.

How to make a Christmas tree from ribbons with your own hands to school in stages: a master class at home for the New Year 2018

Probably, there are no materials left from which craftsmen did not try to make Christmas trees. Everything is used - from cones and paper sheets to soft toys and beads. But, perhaps, you have not yet heard how to make a Christmas tree from ribbons with your own hands to school at home. Then this video and master class is for you!

Video master class on making a Christmas tree from ribbons

After watching the video below, it will become clear to you how to make a small Christmas tree with your own hands at home from satin ribbons to school. This elegant mini-tree will need to be decorated with artificial pearl beads or large beads. However, this video master class will only work for those who know how to deal with small details and are used to making small crafts.

How to make a paper or cardboard Christmas tree at home for the kindergarten for the New Year 2018

Before the New Year, preschoolers often give simple tasks to preschoolers - they offer the children to make something for the upcoming holidays: a box for gifts, a snowman made of cotton wool, New Year's toys. Perhaps, after reading our recommendations and watching photos and videos of master classes, parents will be able to explain to their daughters and sons how to make a Christmas tree in a kindergarten with their own hands from paper or cardboard at home.

Master class on making a paper Christmas tree with step by step photos

You have probably seen how diligently the kids make various paper crafts for the holidays. How enthusiastically the eyes of the children shine, realizing that everything they do is just fine! This simple master class with step-by-step photos will explain to you how you can make a Christmas tree for kindergarten at home - do it yourself from paper or cardboard. In addition, you will need:

• Pencil;
• Scissors;
• Tinsel;
• Fluffy wire;
• Glue;
• sequins;
• Rubber;
• Stand with filler or a large decorative candle.

How to make a Christmas tree with your own hands at home to school for the New Year's craft competition-2018

Before the New Year in schools, children are often asked to bring homemade New Year-themed toys to classes. At the same time, the Christmas tree always remains the most popular product. If you want to learn how to make the best Christmas tree with your own hands at home and win a craft competition at school, read our instructions, memorize the recommendations of the master classes, watch the video with explanations.

Craft Christmas tree for a school competition - Master class with a photo step by step

The most talented children always participate in school competitions. Fighting for a prize, they think over the most unexpected, original products in advance and look for suitable materials for them. After reading how to make a Christmas tree with their own hands at home to school for a craft competition, the guys will be able to make unusual Christmas trees. They can decorate both the classroom and the shelf with souvenirs. Carefully read all the instructions of the master class and get to work.

The Christmas tree can be made in another way. Just stick bright paper ribbons on the cone until you get such a miracle wat.

How to make a Christmas tree from cotton pads at home with your own hands: a master class with a photo

Have you still believed that cotton pads sold in supermarkets and pharmacies are bought up only by ladies who use them to remove makeup? No, they are also acquired by craftsmen, lovers of unusual crafts. If you want to make a fluffy New Year's beauty covered with snow, read how to make a Christmas tree from cotton pads at home with your own hands: a master class with a photo will explain all your steps to you. The size of the product will depend on the size of the Whatman sheet for crafts.

Christmas tree made of cotton pads step by step - Master class with a photo of children's crafts

Having learned how to make a beautiful Christmas tree at home from ordinary cotton pads with your own hands, turning to our master class with photos and explanations, you can surprise all your friends and relatives. Rarely do you find an artificial spruce of such beauty! Try to make it yourself.

Before starting work, prepare:

• Whatman sheet;
• Glue stick;
• stapler;
• Lots of cotton pads;
• Scissors;
• Adhesive plaster;
• Decorations for the finished craft.

How to make a Christmas tree at home from threads for the New Year 2018: video master class with explanations

Among all the Christmas trees made from the most unusual materials, probably the lightest in weight is the filament tree. Well, to ak at home, to make a simple, but durable and beautiful Christmas tree with your own hands from threads, will explain the video master class with explanations from the author of such an unusual craft.

Do-it-yourself Christmas tree made of threads: a master class on video at home

In order to surprise your friends who came to visit you for the New Year, see how to make a Christmas tree with your own hands from threads at home: a video tutorial with explanations will give you all the necessary tips. This craft is quite inexpensive, but it always looks amazingly airy!

How to make a Christmas tree from tinsel to celebrate the New Year 2018 with your own hands: step-by-step instructions with photos for kindergarten and school

Often we feel sorry for the felled Christmas trees, so many are looking for an alternative to a real New Year's tree. It can be an artificial homemade spruce from a brilliant decor. Having learned how to make a Christmas tree for the 2018 meeting with your own hands from tinsel, you will give up the idea of ​​\u200b\u200bgoing to the Christmas tree bazaar.

Christmas tree 2018 from tinsel - Master class with photos and instructions

Having prepared inexpensive, affordable materials and tools, remembering how to make a chic Christmas tree from shiny tinsel for the New Year 2018 with your own hands, you can get to work. Just in case, let the page with the master class open on it and instructions for making crafts be open.

How to make a Christmas tree in stages with your own hands from improvised tools and books: a master class for children for the New Year 2018

How can you imagine a modern Christmas tree schematically? In fact, this is a triangular bright structure, decorated with brilliant decor, beads and garlands. Some craftsmen manage to make spruces even from glossy magazines! We will tell you how to make a Christmas tree with your own hands from improvised tools and books.

Christmas tree from books - Master class with step-by-step photos

After getting acquainted with the master class explaining how to make the most unusual Christmas tree with your own hands from various improvised means and books available in your home library, you will understand that such an activity will bring you real pleasure. Well, when was the last time you held thick volumes of novels in your hands? Now you will do it with pleasure!

What to make a Christmas tree with your own hands: a master class of crafts from cones

The most "alive" are Christmas trees made from natural materials. If you really want to know what you can do with your own hands to make a realistic Christmas tree, a master class with explanations on creating crafts from cones will help you prepare for the New Year 2018.

Christmas tree for the New Year 2018 from cones - Master class with instructions

If you are looking for what to make a Christmas tree with your own hands, a cone crafts master class, or rather, each of its instructions, will answer all your questions. In addition to dense but fully opened buds, you will need the following:

• Thermal gun;
• Hot glue;
• Scissors;
• Cardboard;
• Flowerpot;
• Tinsel and toys;
• A can of white or silver (gold) paint.

Immediately make a reservation that you can choose any size of spruce. Of course, it will take more than a dozen cones to make a large tree.

What can you make a Christmas tree for crafts for the New Year 2018 and how to decorate it

Having decided that in no case will you buy a felled tree at the Christmas tree bazaar, thinking about what you can make a Christmas tree for crafts for the New Year 2018 and how to decorate it, refer to the master classes presented on this page. One of them tells how to make a cotton Christmas tree. When following step-by-step instructions, home craftsmen always get a fluffy white beauty!

White fluffy Christmas tree made of cotton wool - Master class with photo

If, after much thought about what you can make an original Christmas tree for crafts for the New Year 2018 and how to decorate it unusually and brightly, you decide that the cheapest option is for you, read our master class and look carefully at his photo. Create a beautiful Christmas tree from ordinary cotton wool!

How to make a Christmas tree with your own hands from plastic bottles and how to decorate it

Sometimes, throwing away seemingly completely unnecessary things, we do not realize that you are sending valuable building material to the trash for the most unusual crafts. Having learned how to make a Christmas tree with your own hands from plastic bottles and how to decorate it, you will most likely reconsider your attitude to some "garbage".

Green Christmas tree made of plastic bottles: a master class with explanations

Perhaps, after drinking lemonade or Sprite, you throw the used bottle in the trash without regret? In vain. If you are looking for what to give a friend for the New Year, our master class with explanations on how to make an original green Christmas tree with your own hands from plastic bottles and how to decorate it beautifully will help you in choosing a present for the holiday.

Prepare for work:

• Green plastic bottle
• Scissors;
• cork stopper;
• a candle;
• Glue;
• Foam rubber;
• A small plastic cup for yogurt or mousse.

Now that you have seen some great tutorials on how to make a Christmas tree with your own hands using a variety of materials, including plastic bottles, ribbons, cones, tinsel, books, thread, cotton pads and paper, you and your child can make some great Christmas tree crafts. New 2018 year in kindergarten or school. Perhaps it is your product that will take first place in the competition, and all rivals will puzzle over what you made such beauty from.

Autumn is the time when many people start thinking about the most long-awaited holiday of the year. We are talking about New Year's preparations, which are associated with loved ones and friends, a fun feast, gifts and, of course, holiday decorations. Most people tend to decorate their homes with New Year's decor, which is conducive to celebration and creates a special atmosphere.

Today, you can buy any decoration in the store, but there is nothing nicer than hand-made crafts. Hurry up to please yourself with the preparations for the most magical holiday, without which it is difficult to imagine the winter season.

How to make a Christmas tree at home?

To date, there are many materials from which you can create a magnificent Christmas tree that will fit perfectly into your interior.

There are a huge number of various master classes with which you can learn how to make a Christmas tree with your own hands.

Christmas tree made of cones

A Christmas tree made from cones will be an amazing decor element, it can decorate the New Year's table or even serve as a great gift. In order to make such an ornament, you need to prepare the following materials:

• identical bumps;
• strong cardboard paper;
• pencil;
• glue;
• scissors;
• glitter and gold paint.

First you need to take the cardboard and roll it in the shape of a cone, glue the joint with glue. We use scissors to separate the scales from the Christmas tree cones, as they will need quite a lot. After that, the cardboard cone is carefully glued with scales, starting from the very bottom.

If you like the original look, you can omit the paint and other decorations, but they can add shine and charm to the tree.

The paint is applied with a brush, when it dries, the craft can be decorated with sequins, tinsel, ribbons and other decorative elements.

Christmas tree from single-layer napkins

To create such a decoration, you will need napkins, thick cardboard and beads. Initially, we construct a cone of cardboard paper, which will serve as a solid foundation. It is necessary to ensure that the cone has smooth edges and does not fall on its side.

Then we take napkins and cut them along the folds, fold them in three and make cuts again. We fold them again and cut them, as a result, we should get a small square equal to 1/9 of this napkin.

We use a stapler to fasten it in the central part. Then we cut out a circle from the square, and gradually bending its layers, we create a rose.

If the resulting flower is slightly uneven, it can always be corrected with scissors. The number of roses depends on the size of the cone. When they are ready, use glue and start gluing the flowers from the top of the head.

Napkins can be taken in several colors, then the Christmas tree will turn out to be brighter and more original. After all the roses are glued, take the beads and also glue them in some places.

You can decorate such a craft with anything, it is easy to manufacture and does not require special costs.

Christmas tree made of paper and cardboard

This craft is very easy to make, and it looks elegant and original. Using corrugated paper, the Christmas tree will turn out to be quite fluffy. To create it you will need:

• glue;
• green corrugated paper;
• scissors;
• cardboard;
• various decorations to taste.

It makes a cone-shaped base out of cardboard, the size depends on your wishes. To make it translucent, it is recommended to glue the cone with green paper.

The needles are made from corrugations, finely chopped into small strips. Then these stripes are cut even smaller, they should resemble a fringe. We use toothpicks to wrap paper around them and get small flowers, there should be at least a hundred of them.

After that, they are glued to the cardboard base in such a way that there are no gaps. Christmas tree decor can be anything: ribbons, bows, beads, tinsel and much more.

Interesting ideas for making Christmas trees

A Christmas tree can also be made from pasta. To do this, you need to make a cardboard cone, which is pasted over with pasta of various shapes. After that, the decoration is painted in any color. Instead of pasta, you can use coffee beans, which can be decorated with golden sequins and bows.

If you are familiar with the art of kanzashi, then making a forest beauty will not be difficult. To do this, use green and red satin ribbons. A photo of a Christmas tree made by yourself will serve as a pleasant reminder of the wonderful New Year holidays.

A tree of knowledge made of piles of books will become a unique decoration of your home. It can be decorated with tinsel, ribbons and bows, but it is highly not recommended to hang it with an electric garland.

Vytynanka is a type of Slavic art where decorations are made of paper. They can often be seen on window panes, and making vytynanki is quite simple. To do this, you need to use paper with a pattern drawn on it. Then the pattern is cut out with a sharp clerical knife.

An interesting idea could be to create a Christmas tree from cupcake molds. To do this, you need to cut off the bottom of the molds and string them on a cone made of durable cardboard paper.

If you have empty spools of thread, they are also ideal for crafts. The bottom row of coils is glued onto a round solid base, another one on top, the shape should resemble a cone. This decoration can be decorated with ribbons and sequins.

A huge variety of Christmas trees that can be made at home will appeal to any needlewoman. Don't forget about materials like candy, feathers, felt, beads, and more. From all this you can create a bright, elegant and stylish decoration that will be admired. Choose the Christmas tree option and don't forget to make it with love!

DIY Christmas tree photo