How to weave baubles from floss threads: diagrams with descriptions. DIY thread bauble. Weaving original baubles from floss threads with your own hands

Unusual and cute thread baubles have always attracted the attention of others. You won’t surprise anyone with the usual jewelry, but with such bracelets you can easily stand out from the crowd. Moreover, they are attractive not only for their brightness, but also because they can be made independently. Another important feature is the rather interesting meaning that connects the two friends.

Baubles - what are they?

A bauble is an accessory in the form of a bracelet, made in the form of weaving from threads, ribbons, beads and other materials. Most often it is woven by hand, and its creation is based on the meaning of friendship between two people. But the last point is not necessary, since in modern times many perceive it simply as decoration.

The prototype of modern baubles are the jewelry of Aborigines and Indians, who exchanged similar bracelets to establish a spiritual connection. Later, this idea was borrowed by supporters of the “hippie” movement, who thereby confirmed their attitude towards this brotherhood.

A classic option is baubles woven from floss threads. They can be either plain or multi-colored. Also, depending on the type of weaving, they can depict various designs and patterns. The colors on the baubles have certain meanings, thanks to which it was possible to determine what a person was like.

Nowadays, baubles made of threads and other materials are quite a popular accessory, and you can weave them either yourself or buy a finished product. They go perfectly with summer and spring looks. Moreover, they can be worn by both girls and boys.

Methods of weaving baubles

The weaving of baubles itself involves tying four types of knots. There are two main ways to weave baubles: oblique and straight. Already among them you can find interesting solutions for a design or pattern, which will differ not only in complexity, but also in execution technique.

Those who have enough experience can even combine these two weaving methods, creating new original designs and color mixtures.

Oblique weaving

The principle of oblique weaving is that the knots are knitted in one chosen direction - from left to right or vice versa. The simplest pattern that perfectly demonstrates the principle of oblique weaving is the classic three-color one.

So, you will need threads of three colors, the length of which is at least 60 cm.

1. The first step will be to create a knot and start a thread out of thread. It is attached to the work surface.
2. Weaving starts from left to right. It is from this side that you need to start tying knots. To do this, the two outermost threads are knitted together in a knot, while the outermost one is held in place.
3. The resulting knot is transferred to the base of the thread bauble, and then another knot is made.
4. The same must be done with other threads in the direction to the right. That is, the outermost thread will tie two knots on subsequent threads.
5. After the first row, you can proceed to the next one. It is done in the same way as the first one. Only the color of the outer thread will be different.
6. When the weaving of the thread baubles fits the size of your wrist, the final part should be secured.

Straight weave

Direct weaving of baubles is more difficult. However, those who have mastered oblique will also be able to cope with this. The advantage of this weaving method is a greater variety of patterns. Baubles can contain not only multi-colored patterns, but also full-fledged designs. This can be achieved due to the fact that the knots are knitted horizontally.

The weaving moves first from right to left, and then vice versa. It is better to start learning how to weave baubles in a direct way with two colors. One will act as a background, and the other as knots. Moreover, much more of the second is needed.

1. The beautiful base of a thread bauble is made like this: the threads that will be used as a background must be folded in half.
2. On the one hand, closer to the fold, a thread is tied, which is called “leading”.
3. You need to tie all the background threads with the leading thread so that you end up with a beautiful, uniform loop.
4. Then you need to tie certain knots on the background threads, moving towards the opposite side.
5. When the first row is completed, you need to move on to the second. Here weaving will be carried out according to the same principle, but in the opposite direction. Therefore, many people call this method “snake”.

Having gotten your hang of weaving baubles in two colors, you should try your skills on several shades or start creating real patterns.

Patterns for weaving baubles from threads

To begin with, it must be said that there are two types of schemes:

• a full cycle means that after weaving the pattern has finished, it must be repeated again;
• an incomplete cycle demonstrates the principle of tying knots, that is, there will be some colors on top and others on the bottom.

As for the nodes themselves, they also come in two types:

• right is characterized by the fact that the working thread will be located on the right side of the resulting knot,
• left means that the working thread will be on the left side of the knot itself.

There are also 4 types of nodes:

• straight - shown in the diagram with an arrow pointing in a right-down direction. And for this you need to make two left nodes;
• the reverse is shown in the diagram as an arrow, which shows the left-down direction. And that means making two right knots;
• The left tatting looks on the diagram as an arrow in the form of a right angle, looking in the lower left direction. To make it, you need to do the following: first you need to tie a left knot, after which, changing the threads in places, you need to make a right knot;
• right tatting - in the diagram it indicates the direction to the right and down in the form of a right angle. It is performed according to the same principle as the previous knot, only in the opposite direction: first the right knot, then the left.

Often the diagrams show the colors of the nodes, however, you can replace them with others. At the beginning of the journey of weaving baubles from threads, in order not to get confused, you can mark the rows that have already been made.

As for the schemes themselves, there are a huge number of them. Thanks to them, you can create various designs and patterns on baubles. It is also possible to come up with a pattern yourself; for this purpose, special programs have been created that process the intended ornament into the form of a weaving pattern.

In the video below you will see how diverse thread baubles can be, in which case to use straight weaving and in which oblique. Get inspired.

To create a multi-colored thread bauble, you will need floss threads - at least six colors, scissors and fasteners.

1. The threads are cut in half so that there is double quantity of each color.
2. The threads are then arranged so that like colors are mirrored. That is, red will be the extreme color on the left and right sides, green will be the second, etc.
3. The threads can be attached in any way you like.
4. Weaving can be started from any side, for example, from the left. To do this, the outer thread makes two left knots, which need to be placed right at the base of the bracelet.
5. Then, again, the red thread should tie knots on other threads. They need to be tied to the middle.
6. The same must be done on the other side, that is, repeat the actions, but in the opposite order.
7. When the red threads come together in the middle, you need to tie a knot with the right leading thread.
8. You need to start the second row from green. Everything is done in the same way as with the red thread.
9. At the end of weaving, you can tie the bauble in a knot and weave a thin braid from the remaining threads. The same needs to be done with the threads that remain at the base.

How to decorate baubles?

The bauble itself is an original accessory, but this does not mean that the bracelet should be made exclusively from floss. It can be complemented with various decorations. The simplest option for decorating baubles are interesting locks. They can be purchased at craft stores. This could be an infinity sign, chain links, a beacon and much more. And you can weave beads, spikes, beads, stones, sequins, rhinestones into the bracelet itself.

To decorate a bauble with beads or beads, they need to be strung on a thread and sewn into a bracelet using a needle.

The decoration in the form of rhinestones looks interesting. They can be glued to the finished bauble, but in this case there is a risk that the glue will leave marks. Therefore, you can buy a thread with ready-made small rhinestones applied.

So, in order to attach a thread with rhinestones, you need to do the following:

1. In the middle along the thread bauble you need to lay out a thread with rhinestones of the appropriate length.
2. Then, using a thread whose color matches the bauble, you need to start sewing on the thread with rhinestones.

Weaving baubles is quite an interesting process, but difficulties can also arise with it. And the first problem for beginners is incorrectly determining the length of the threads. Firstly, you need to leave the length so that you can wear the bauble on your hand. Secondly, depending on the complexity of the weaving, threads with a length of 80 cm or more are needed. Therefore, the more complex the pattern, the longer the thread should be.

At the beginning of training, you can simply secure the threads in the form of a simple knot. But to make your work look more neat, you can use one of the suggested methods:

1. Fixing the threads with a pin. All the threads need to be tied around a pin, and then it can be attached to a piece of fabric or even to your jeans.

The bauble is an excellent decoration that is suitable for summer. And the weaving process itself can become an interesting hobby, because there are many patterns of varying complexity that can be used to create a beautiful and unusual bracelet. Also, a hand-woven bauble can be a pleasant gift for girlfriends or friends.

Finally, an easy master class on weaving the simplest baubles from threads, which will allow even inexperienced beginners to get excited about the idea of ​​weaving.

Instructions

The simplest, but no less original bauble is made from eight colors (eight threads). Arrange all the threads in the order in which the colors of your bauble will be located. Tie a knot on one side, leaving a loop on that side. This is done so that in the future you can tie a little thing on a friend’s hand.

Having made a knot, it must be secured either on the sofa, or on your own trousers, or on any other suitable surface with a pin. Straighten all the threads and start weaving. Tie the rightmost thread with two knots on the leftmost thread. In the process of weaving, the threads change places. With the same thread, tie all the same two knots, but on the next thread. Continue tying knots all the way to the edge, resulting in the first diagonal row of knots of the same color. Take the newly formed rightmost thread and again knit the knots in the same sequence, performing all the same operations.

This option is the most common and simple, it is also called the classic. But there are also more complex options for very patient knot tyers. One of these ways will allow you to weave a bauble with patterns in the form of arrows. To do this, also take eight threads a little over a meter long.
Take the thread on the far right and do the manipulations you are already familiar with, but only to the middle of the row. Then use the leftmost thread - tie it in the same way until the middle of the row, but now all the manipulations will seem to be reflected in a mirror, i.e. go in reverse order. Threads that meet in the middle must be tied together. Thus, you will get a pattern with arrows.

In addition, you can weave baubles, simply weave the threads in a certain order. For one of these patterns, take, as usual, eight threads a little over a meter long, tie a knot, and secure it to the work surface. Move the leftmost thread to the middle, i.e. place it between the fourth and fifth threads. Then take the rightmost thread and also place it in the middle, with the rightmost thread above the leftmost thread. Next, take the "new" extreme threads and repeat all the steps until the end of the baubles. If you take threads of four colors and simply repeat them in a mirror direction again (for example, red, blue, yellow, green and green, yellow, blue and red again), you will end up with a pattern of intertwining diamonds.

note

The length of the threads should be four times longer than the desired length of the bracelet.

Helpful advice

Weaving baubles will not only allow you to provide unforgettable gifts for almost any occasion for your friends, but will also help calm your nerves.

Sources:

• Memory knot. How to weave baubles from threads in 2019

People learned to weave hand jewelry from ribbons, threads or thin leather straps many thousands of years ago. However, baubles became popular precisely because of the hippies. Adherents of this subculture were on the side of sincerity and naturalness, rejecting all material values ​​of society. And feni, woven from ordinary colored threads with their own hands, were considered the best gift, a symbol of friendship and boundless trust in each other.

You will need

• - threads;
• - scissors;
• - scotch;
• - safety pins.

Instructions

In order to weave a “bracelet”, prepare threads of your favorite colors, safety pins and scissors. You can weave from cotton threads such as "Iris", "Snowflake" or "Muline".

Select threads. Their number must be even. To prevent the bracelet from turning out very thin, take at least six or eight threads of different shades. The length of the thread should be four times the size of the finished bauble.

Secure the threads using one of the appropriate methods. If you want to have strings at the ends of your hair dryer, then leave a small "tail" about ten centimeters long, fasten the threads with tape, braid them into a pigtail and attach them to a flat surface, for example, to a table. Straighten the threads in the form of rays.

According to the scheme. It is thanks to the patterns that you can create real masterpieces: bracelets with names and many other interesting things. But how to work with them? How to read? And how not to get confused in the notations?

What needs to be taken into account when training?

The main thing you should pay attention to is the choice of material with which you subsequently plan to work. For example, it can be beads, floss threads, twine, satin ribbons, colored rubber bands, etc. Accordingly, each type of material has its own subtleties and weaving features, as well as patterns. Therefore, before you start learning this or that, choose the material.

What do you need to know when weaving baubles from threads?

Let's say you chose What Next? And how to weave baubles from colored threads correctly? Next, you need to study what kind of knots there are in weaving, since the creation is based precisely on them.

Main knots in floss: knot No. 1

Node No. 1 looks like a cross with an arrow and a downward pointer in the diagram. It stands for this: you have two working threads of different colors (for example, yellow and orange); you take the thread that is located to your left and bend it towards the other, holding the resulting triangle with your finger; insert the end of the bent thread under the straight thread and tie a knot. Then repeat the same procedure a second time.

If you know the decoding of symbols and actions associated with them, you will easily figure out how to weave baubles according to the pattern.

We weave the main knot No. 2 from threads

Node No. 2 can be schematically depicted as a cross, inside of which there is a circle with an arrow indicating the direction - down to the left. This designation is deciphered as follows: in front of you are again two colored working threads; this time you take the one that is on the right side, put it on the other; thread the end into a makeshift ring and tie a knot. The second node is performed using a similar system.

Let's understand the diagrams: main node No. 3

Node No. 3 in the diagrams is depicted as a cross with a circle, inside of which there is an arrow (it shows the direction to the right and down). Before weaving baubles with such a knot correctly, pay attention to the position of the arrow in the center of the circle. Look where she points.

This knot works according to the following principle: you take the thread that lies on the right and pass it under the other; tie a knot; repeat all the same steps again.

How to weave baubles according to the pattern: knot No. 4

The fourth node is usually schematically depicted in the form of a cross and a circle with an arrow pointing to the left and down. This pattern is deciphered as follows: the working thread to your left is laid on top of the other remaining one; the end of the thread is pulled into a ring and a knot is tied. The second time you put the same working thread under the other one and tie it into a knot in the same way.

weaving baubles?

Before weaving baubles step by step and according to the pattern, you need to know one interesting nuance. As it turned out, bracelets can be made either in a full or incomplete cycle. So, if the diagram assumes an image of a complete cycle, then all the colors of such a bauble are arranged sequentially on both sides of the product.

If the pattern provides for an incomplete weaving cycle, then in the photo you will see a complete mismatch in the color of the threads on the left and right.

Weaving with paired and unpaired thread counts

Do you want to learn how to weave beautiful bracelets? Don’t know how to weave baubles according to the pattern? Read our useful tips - and everything will become clear to you right away. So, in the diagrams you can often see that when weaving, paired and unpaired numbers of threads or ribbons are used. For example, you may have 5 gray and 5 black threads or ribbons, 4 white and 4 red. This weaving will be in pairs. In an unpaired thread, the number of working threads may not match. For example, you might have 5 red and 7 white threads.

How to weave bracelets with inscriptions correctly?

Many craftswomen and craftsmen try to make jewelry with a name or inscription as one of their first works. Is it difficult to do? In general, no. However, the creation of such bracelets involves working with a large number of threads, which are easy for beginners to get confused in.

Before weaving baubles with inscriptions, it is worth finding a suitable pattern and counting the exact number of threads needed to create the product. To do this, you need to count the number of cells in the first vertical column in the diagram. For example, there were 8 of them. This means that for weaving you will need exactly 8 threads.

In addition, it is worth considering the fact that the design or inscription on the bracelet involves the use of two types of threads or ribbons: one of them is used to create the base-background, and the second is used for the inscription or design. In this case, the length of the secondary thread or ribbon should not be large (50 cm is enough), and the length of the background thread should be 2-3 times greater than the expected length of the product. Please note that to create the background you will need a large number of threads. Therefore, it is better to take a whole skein. The result should be one leading thread and 6-8 background threads. What else do you need to know before weaving baubles with inscriptions?

What else needs to be done before weaving baubles with an inscription?

Before you begin the work itself, you need to make some simple mathematical calculations. This must be done not only so that the bracelet ultimately fits on your hand, but also in order to correctly place the inscription on the product.

To make your task easier, you should write your intended name or inscription on a sheet of squared paper. Next, pay attention to how many cells it occupies. For example, you got 30 cells, which equates to 30 rows. The approximate weaving density of your product will be 5 rows per 1 cm of bracelet. Therefore, 30 rows have a density of 6 cm (30/5).

Then we measure the volume of the wrist. Let's say it corresponds to 15 cm. This means that with a length of 15 cm for a bauble with a text length of 6 cm (15 - 6 = 9), it is necessary to make the main background 9 cm. If we divide this number by two, we get 4.5 cm on each side. Next, multiply the resulting value by 5 and get the number of rows for the background (4.5 x 5 = 22.5 cm). And only if these conditions are met, the inscription will appear in the middle of the decoration. We will talk further about how to weave simple baubles.

How to make simple baubles?

It is always better to start with simple products, which in the future will allow you to master more complex weaving techniques much faster. So, if you want to make a simple bracelet, then your best bet is to take an even number of threads or ribbons and divide them in pairs by color. For example, in the middle there will be two blue threads or ribbons, followed by two orange ones (one on one side, the other on the other side), the next two green ones, then two purple ones, two orange ones and two red ones.

Take the first and second strands and using the knot technique, tie both strands. Repeat the same movement again with the same threads, and then with the last two (this time the movement with the knots will be in a mirror image). After this, repeat the same procedure with the remaining threads or ribbons. If you work with the diagram correctly, you should end up with a herringbone pattern.

How can you make round baubles?

If you don’t yet know how to weave round baubles, we will tell you. Straight and round weaving is considered the most difficult, requiring some experience. For example, to make a product using rope weaving (round), you need to select a pattern and prepare the threads (their length should be three times longer than that allocated for the bauble itself).

Moreover, the simplest version of this weaving is based on working with four threads; for example, it could be two red and two white or multi-colored. This weaving is done strictly according to the pattern: unfold the threads to the sides and tie the two outer ones; then we put the first one on the second one and tie it; the second to the third, the next to the fourth and then repeat in a circle.

In a word, understanding the schemes is not so difficult. The main thing is to know general concepts and notations!

VN:D

Rating: 4.6/ 5 (589 votes cast)

The site already has several articles about baubles, but in the comments the phrases constantly pop up: “I don’t understand anything,” “so how to weave baubles from floss.” Therefore, we decided to write a detailed article about weaving baubles from floss, types of knots and tell you that in reality everything is very simple.

In oblique weaving of baubles, 4 different knots are used, they are designated differently and are woven differently. These should be woven in rows from left to right, or from right to left, and not in any other way, and not as the arrows show. In this case, the arrows only show which knot needs to be tied. You can learn how to weave baubles with oblique weaving using our master class: .

You can also watch how to weave baubles with oblique weaving in our video:

3. How to weave baubles with straight weave with two colors (including baubles with names)

There are already articles on this topic on our website that tell how baubles are woven using straight weaving. This is a master class and... On the generator page you can create your own individual bauble design with any name or text.

You can see how to weave baubles using straight weave in two colors in our video:

4. How to weave baubles with straight weave with a large number of colors

Straight weave baubles with two colors are woven differently than baubles with many colors. In this article we will not describe this technique; it deserves special attention. We analyzed this weaving in the master class. You can create a bauble pattern yourself thanks to ours.

Also watch the video on how to weave multi-color baubles using straight weaving (more than 2 colors):

5. How to weave baubles with sharp arrows (braid)

To weave this bauble, take floss threads a little more than a meter long. 6 colors, 2 pieces of each color. Lay out the threads symmetrically, connect them into a bundle and tie them in a knot at a distance of 7 centimeters from the edge. Thread a pin through the knot and attach it to a pillow, or glue the beginning of the bauble to the table with tape. Divide the threads in half.

Start on the left side with the outer color, ours is red. Using this thread, make a figure of four over the second thread, then pass the first thread under it and thread it through the hole as shown in the photo.

Tighten the knot by pulling the first thread upward to the right. Repeat this knot again, you will get a double knot, this is what the whole bauble will be woven with. Thus, our first thread moved from the left side one position to the right and became the second. Using exactly the same knot, we tie the second thread around the third and so on until the second thread reaches the center. This is one half of the bauble.

Now take the thread from the other side, ours is also red. We will make knots from right to left. To do this, we do everything symmetrically: we bend the red thread over the orange one in the form of a mirror four. Then we also thread it inside and tighten it to the left up. The main thing is not to forget that this knot must be made twice on each thread.

We continue to knit knots with this thread from left to right until it reaches the middle. Tie a knot with two middle threads of the same color in order to tie the halves together. So we have finished the first line of our bauble. The remaining rows are knitted in exactly the same way with two outer threads of the same color.

When you finish the bauble (you can tell by simply trying it on your hand, take into account only a little free space in order to tie the bauble), tie a regular knot using all the threads, and then braid it.

This bauble can also be made asymmetrical; to do this, first lay out the threads without symmetry. If you don't stop in the middle, you will end up with a classic oblique braided bauble. Don't forget that the knots need to be tied twice. And don't skip the middle when you knit.

6. How to make a bauble with rhinestones

There are many ways to weave baubles, and we will also look at how to make any bauble more unique and shiny.

We make a bauble with rhinestones. To do this, we will need a ready-made bauble (we will take a woven bauble with arrows), a chain with rhinestones, a floss thread, a needle and scissors.

Thread the needle and tie a knot at the end. Pass the needle through the bauble from the bottom up at the very beginning of the bauble. Or, to better hide the knot, you can thread the thread through the knot at the very beginning of the bauble. Place a chain with rhinestones in the center of the bauble.

Make a stitch between the first two rhinestones. Then pass the needle from bottom to top again, this time trying to get it in the middle between the second and third stone.

Continue this way until the end of the bauble. After the last stitch, tie a knot on the reverse side. Or again, thread it through the knot at the end of the bauble. Then trim the edge of the thread.

Our bauble with rhinestones is ready.

7. How to make a bauble with thorns

To create a bauble with spikes we will need: any bauble, 5 chrome spikes with fasteners, a screwdriver and scissors.

Make marks with a marker to ensure even placement of the spikes. Use a ruler, or calculate by thread. Pierce in the marked places with scissors so that the screw can come through.

Place the screw through the hole and screw it into the tenon using a screwdriver.

Repeat with the remaining spikes in the same way. That's all! Our thorned bauble is ready.

8. How to make a bauble with a chain

In order to make a bauble with a chain, we will need: any ready-made bauble, a short chain with large links, a floss thread, a needle and scissors.

Thread the floss thread through the needle. Then untie one knot at the end of the bauble and tie it together with the end of our thread. On the reverse side, thread the needle first from the very edge of the bauble.

Place the chain near the bauble and thread the needle through the first link. Pass the needle through the back of the baubles again, so that the needle is near the second link of our chain.

Continue this way until the end of the bauble. The chain will need to be adjusted to the length of the bauble. To do this, straighten the link that extends beyond the length of the bauble and remove the rest of the chain. Make two stitches on the last link. After this, untie the bauble knot and tie it together with our thread.

Trim the remaining thread. Your updated shiny bauble is ready. Does she really look brighter now?

9. How to weave baubles with nuts

Using ordinary hex nuts you can weave a very original bauble. It somewhat resembles a spine. This bauble will look great on a guy’s hand. And nuts can be bought at any hardware store in different colors and sizes.

For this bauble we will need a spool of cotton rope, hex nuts (the quantity depends on you) and scissors.

Take three ropes, tie them into a knot, leaving ends 5-10 centimeters long free. After the knot, start braiding with a regular 3-5 centimeter braid.

Next, before making a strand with the left thread, put a nut on it, press the nut tightly to the pigtail and make a strand with the left thread. If your thread or rope is not very thick, then you can make a ring inside the nut (by wrapping the nut with thread), and then weave further. This way, the not very thick rope will not wear out very quickly.

Hold the left nut with your finger. Before making a strand now with the right thread, put a nut on it and make a strand. Hold the nut with your finger in the same way so that it is pressed tightly against the pigtail.

Then there will be a new thread on the left, thread the nut and knit the bauble in the same way. We try to knit tightly so that the nuts do not dangle or become loose after a couple of days of wear.

We repeat the steps and weave a bauble. We calculate the required length according to our wrist, taking into account the free space before and after the nuts.

After we have finished braiding the nuts, we again make 3-5 centimeters of a regular braid, tie a knot and leave another 5-10 centimeters of the free end of the ropes.

We wrap the bauble 2-3 times around the wrist and tie it. Our bauble with nuts is ready!

10. How to weave baubles and tied chains

Shiny chains tied with multi-colored floss threads look impressive, right? And they are made very simply. Let's learn how to weave them. We will need: a chain with large links, floss threads of different colors, two hair clips and scissors.

Let's cut 2 sets of 15 threads each. The length of one thread should be 4 times the length of our bracelet. Tie both sets of threads into one knot, leaving 5 centimeters free. Put a pin on each set of threads; they will help you easily thread the threads into the links of the chain and weave a bauble.

Place the threads to the left of the chain. Pull the first set of threads through the first link of the chain using a bobby pin, as shown in the photo.

Place the second set of threads on top of the first. Thread the second set of threads through the same chain link from the bottom up.

We move on to the second link, again put the first color on top of the second and thread it into the second link from the bottom up. We repeat in the same way with the second color. We have a chain with fairly large links, so in each link we make a braid with each set of threads. If you have a bracelet with smaller links, you can weave one pass into each link.

Repeat the steps until you reach the end of the chain, then tie a knot and trim the ends. So our bauble is ready. You can tie the chain on both sides, it will also turn out interesting. To do this, simply turn the chain over to the other side and weave according to the same instructions.

11. How to weave a friendship necklace

Let's learn how to weave a wonderful necklace. It looks interesting. It can also be given as a gift, just like a friendship bracelet. And they are quite easy to weave.

Well, we will need: cotton rope, floss threads, nuts and washers, spools of thread and scissors.

In order to make a necklace of two colors, we take two skeins of floss and wind them on spools to make it easy to weave. Then we take a rope of the required length and tie it together with the threads in one large knot. We fasten the end with tape to the table, or with a pin to the sofa. Let's start weaving in red, which means we hold the purple color in our left hand so that it is taut along with the rope. We take the red color in our right hand, make a loop in the shape of a four with a thread over the rope, then thread the spool into the resulting loop from the bottom up (see photo) and tighten the knot by pulling the spool up to the right. We repeat this knot many times until you decide to change the color.

Changing the color is very easy. To do this, simply transfer the red spool to your left hand and pull it, and with the purple thread we begin to knit knots, as described above.

You can change the colors as you wish. You can add washers or nuts in the middle of the friendship necklace and then tie the knots again. When you are finished knitting, untie the first knot and tie both ends of the necklace into one knot. In addition, the necklace will look much more interesting if there are more colors. You can weave a large number of thread colors in the same way, just hold all the currently unused thread spools in your left hand. It turns out such beauty!

12. How to weave a bauble wrapped chain with rhinestones

For this bauble we will need: 110-140 centimeters of leather cord one and a half millimeters thick, 30-40 centimeters of a chain of balls or crystals, 150-180 centimeters of thread, a brass nut and scissors. The length varies depending on your wrist size. It is designed to be wrapped twice around the wrist and tied.

Fold the leather cord in half to make a loop. The size of the loop must be selected in such a way that the nut, which will act as a fastener, fits tightly into it. Run the thread along a leather cord a couple of centimeters long. Then we begin to wrap the rest of the thread around the cord in the opposite direction from the loop. Pull the thread tightly so that the end does not jump out and unravel.

Place a chain with balls between the two halves of the leather cord. Wrap the thread tightly between each individual ball.

Continue wrapping the chain until the bauble reaches the required length.

When you reach the required length, tie a knot with three threads (thread and two halves of leather cord).

Then thread the nut and tie another knot. Trim off any excess ends.

The bauble with wrapped rhinestones is ready. Please note that the size is designed for two rings around the wrist. If you want to make one turn, or vice versa more, calculate in relation to these dimensions.

13. How to weave macrame baubles

Square knots, which are used in macrame, also look very impressive in baubles. Only we will take brighter materials. Instead of thread, we will use nylon cord of different colors. Add shiny metal and stones and get shiny macrame baubles.

So, we will need: four meters of nylon cord half a millimeter thick, metal jewelry or stones, a needle and scissors.

Cut the nylon cord like this: 2 pieces of 75 centimeters, 2 pieces of 50 centimeters and 1 piece of 25 centimeters. Fold one half-meter piece of nylon cord in half, thread the resulting loop into the ring, and thread the end of the thread into this loop and tighten. Repeat with the second half-meter end on the other side. This way we will fix the ring. These threads will remain motionless for us.

Take one piece of nylon cord 75 centimeters long, bend it in half and place the center under the cord tied to the ring. Turn the right part of the cord to the left, place the left part of the cord above the right and thread it into the loop formed on the right from the bottom up as shown in the photo.

Pull the knot tightly and push it up until it stops.

Next, we turn the left part of the cord to the right, lift the right part above it, and then thread it into the loop on the left in the same way from bottom to top and tighten the knot. It turns out to be a mirror image of the previous node.

We repeat the knots left and right until the required length of the bauble is reached. Please note that the fastener will take up about one and a half centimeters.

When you're done, take the left side of the cord first and thread it along the center part 4-5 knots from the back of the bauble.

Repeat the same steps with the right half of the cord.

When you thread the cords, cut off the excess part, and the small pieces that remain sticking out can be additionally melted and sealed using a lighter for better fixation. We weave in the same way on the other side of the ring with a second piece of cord 75 centimeters long.

Next we will make it so that the bauble can be moved apart and tightened. It will turn out solid and without knots. Take the piece of cord that we cut off as extra and temporarily tie the cords of the ends of the bauble together.

Next, take the last piece of nylon cord 25 centimeters long, fold it in half, and start knitting the same left and right knots as we knitted earlier on the bracelet itself.

Make knots about one and a half centimeters long. Thread the ends of the cord with which we knitted back and solder with a lighter. Remove the temporary knots that tied the two ends of the baubles.

Thus, with the help of the central cords we can now adjust the size of the bauble. Choose the length you need and tie knots at the ends, and then cut off the excess.

All. Adjustable macrame bauble is ready! As a decoration in the center, you can take whatever your imagination comes up with.

14. How to weave beaded baubles

Let's make another unusual bauble - threads plus beads. For this baubles we need 1.2 meters of thread, beads, buttons, scissors.

Cut the thread into two pieces, one 70 cm, the other 50 cm. Fold the long thread in half. Then attach one end of the short thread to the ends of the long thread and make a bend at half of the long thread. Look at the photo how it looks. You get a loop and three ends of thread 35 centimeters long and one short end.

We tie a knot, leaving a loop of such a size that the selected button fits tightly. The fourth short tip is then cut off.

With three threads, we begin to weave an ordinary pigtail. After three centimeters of the pigtail, we thread the beads on the left thread.

Press the beads to the pigtail and cross the center thread with the left thread. Now put the beads on the right thread and cross the center thread with the right thread.

Hold the beads with your finger as you weave to make the bauble tight. Continue braiding the braid, alternately threading the beads from the left to the right.

When the size of the bauble is sufficient for your hand, we again braid a bead-free braid of the same length as at the beginning. Tie a knot at the end.

After the knot, put a button on the threads and tie a double knot.

Cut off the excess part. So our bauble with beads is ready.

You can take threads and beads of any colors, try, experiment, you will like it!

15. How to weave a bauble with hooks

Let's look at another option on how to weave baubles. This will be a bauble with hooks. It is not difficult to make, in addition, it has one interesting advantage, which I will talk about at the end of the master class.

Well, let's get started. For this bauble we will need:
- a cord 2 mm thick, about 60 cm long, instead you can use flexible wire, twine, or something similar;
- copper hook;
- ruler;
- pliers;
- lighter.

Before you begin, seal the ends of the cord with a lighter so that it does not unravel when worn. Take a pair of pliers and bend the hook on one side until it stops so that the cord cannot come out. Bend it on the other side too, but so that the cord can pass through.

Now we will make an adjustable knot. Thread one end of a 6-inch cord through the fully curled side of the hook. Bend 8 centimeters of the cord back towards the hook, 5 centimeters of which turn towards you. We will tie a knot with this end.

Wrap it around all the threads, making two circles towards the left loop. Thread the end through the left loop.

Hold it with your left hand and with your right press the skeins to the left until the knot is tied tightly. You can check that you have tied the knot correctly by holding the hook in your right hand and pulling the cord with your left. The knot should move close to the hook.

At the other end of the cord you need to make the same knot. There is no need to thread it through the hook. In this case, the turns of the end of the cord must be wound in the direction to the right.

Pass the end of the cord into the right loop and tighten the knot, moving the turns to the right as well.

Trim the ends of the cord and resolder them with a lighter if necessary. Now our bracelet is ready. It needs to be wrapped around your hand 2-3 times and adjusted with the second sliding knot.

Now here's an interesting point. Instead of a hook, you can use anything. You just need a hook on one side, and on the other you can drill a hole if necessary. This is how you can make this bauble for a guy. Especially if he is a fisherman, it will be very relevant. A designer version of a fish hook is used here.

If you show your imagination, you can use any item that can highlight and convey the owner’s hobbies. For musicians, for example, you can take a keychain in the form of a note, on one side you can fasten the cord to its tail, and on the other, drill a hole in its base. It will also look stylish and interesting. Show your imagination and surprise your friends!

Write in the comments what you liked, what other baubles you want to learn how to weave, what baubles you like, is it worth writing more articles and master classes of this kind. The team of the site 3 children tried for you. Subscribe to news on social networks, stay tuned for updates.

Everyone has at least once encountered a person wearing a bauble. This small wicker bracelet is a symbol of friendship and peace, and it is not without reason that it has a foreign name “Friendship bracelet”. The history of this simple but stylish decoration began among the Indians of North America, who gave ropes woven in a special way to their friends. It was believed that the longer the bauble is kept on the hand, the stronger the friendship between people. Not torn, but to be independently removed from the hand, symbolized the end of friendly relations, and was one of the most powerful insults. The secret of how to weave baubles from threads was passed down from century to century, until in the early 60s of the last century these bracelets became one of the symbols of hippies and spread throughout the world.

In addition to friendship between people, baubles symbolize a person’s interests and passions. For those who know how to read the secrets of the threads of these cute bracelets, they will reveal a lot about their owners. The picture or pattern depicted and the color of the threads are both important. A widely known example is that if a guy and a girl have the same or very similar baubles on their hands, then these young people are a couple.

Gradually, the original meaning of exchanging baubles was lost, but they did not lose their popularity. These bracelets are a universal decoration and therefore now they can be seen not only on representatives of the hippie subculture or the hands of little needlewomen, but also on secular fashionistas and fashionistas. Baubles made from floss always add brightness and special color to an image.

The easiest way is to push the finished thread onto the wrong side of the product, leaving enough thread to later tie a knot.

We apply a thread of the same color to the tear site from the wrong side

And then we tie this thread with standard two knots.

From the wrong side, we tie the ended thread with the one that was just inserted.

The place where the threads join is hidden, and weaving can continue further.

Patterns for weaving baubles

You can learn how to weave this or that bauble from the weaving diagram. To do this, you should learn to read them. First of all, you should understand that a bauble can weave both in a full cycle and in an incomplete one. This can be determined using the arrangement of threads: a complete cycle is characterized by the correct sequence of colors on both sides of the bracelet

In an incomplete cycle, the threads on the left and right will not match each other in color.

An example of a complete cycle is the very first version of weaving a bauble described above, in which, when the pattern is completed, its weaving begins again from the very beginning. In partial cycle patterns, you need to keep track of the sequence of the cycle, but ending the weave map will also mean returning to the beginning of the cycle.

In addition to different weaving cycles, there are patterns with paired and unpaired numbers of threads in the bundle.

Paired number of threads (6 gray and 6 yellow)

Paired number of threads (4 red and 4 white)

Unpaired number of threads (6 blue and 5 yellow)

Unpaired number of threads (5 white, 3 gray and 2 yellow)

How to further decorate baubles

The stores sell a lot of little things that can give your new bauble an original look. For example, you can decorate your product with rhinestones. To do this, you need to weave a bauble from about a dozen threads, and then attach a strip of chain with rhinestones to it.

The fastening is done as follows: a double thread with a knot at the end is inserted from the inside out and brought out to the outside of the bracelet. Holding the chain with your thumb, grab the link and bring the thread back to the wrong side. The procedure is repeated step by step until the chain is attached to the entire bauble. Inside there should be a regular row of stitches along the product. The remaining thread is secured and carefully cut off.

In addition to the external decor, they can be beautifully combined with each other, alternating on the wrist, for example, bracelets of cold and warm shades or placing baubles of the same color but different tones from top to bottom. Rainbow baubles or those that originally characterize their owner look beautiful on the hand, reminding everyone of the hippie times and the original meaning of this decoration.

You can give baubles to friends on their birthdays: it will not be just a gift, but a beautiful thing made with your own hands and, undoubtedly, such a bracelet will seal the bonds of friendship for a long time.