Easter gifts from satin ribbons. How to make kanzashi Easter eggs from satin ribbons with your own hands. Necessary materials for DIY Easter eggs from pasta

Olga Firsova

Easter- one of the most important and beautiful church holidays. most popular character Easter is an egg.

I suggest doing satin ribbon easter egg. For this you will need the following materials: - satin ribbons in two colors(0.5 cm thick, - scissors, - double-sided tape, - needle and thread, - chicken egg shell, - bead (or any other embellishment like beads, lace, sequins, etc.)

We take the shell and glue tape on both sides

Peel off the protective film

We measure ribbons, I take about a meter with a little, but the length depends on the density of the pattern. We fix the ends tape on tape

Holding the fixed ends with one hand tapes, with the other hand we take ourselves ribbons and wrap them around the egg, each time crossing ribbons at the ends of the egg. After everything the egg will be hidden, fix small stitch ribbon

Remaining ends ribbon can be cut, but you can leave and decorate them egg and decorate with a bead

The result is something interesting egg that can be given as a gift

Related publications:

"Bows from satin ribbons" Bows from satin ribbons look very impressive on any work done. In the first photo there are bows made specially.

I made such a beautiful swan from satin ribbons. I used this craft as a visual material in a literary quiz ..

To make a Christmas ball you will need: - a foam sphere (I have a diameter of 14 cm); - short carnation pins (about 350 pieces);

I did a "miracle", I can't call it anything else. I worked for a long time, burned my fingers with glue, but it's worth it, I just can't stop looking, I think.

Master class on the topic: "Heart for loved ones." Coming soon is Valentine's Day. On this day, I want to deliver to my loved ones.

I have already talked about how you can make a Christmas ball with your own hands, today I will continue my story and share how I made another one.

For believers, Easter is considered the biggest church holiday. Each housewife sets the table after Lent, trying to decorate it beautifully. In addition to the main dishes, eggs are always put on it. In the old days, they were made only red, because they symbolized the drops of Jesus' blood that dripped along the road to Calvary.

Now the housewives compete in the art of coloring eggs. There are different ways of painting using wax, paraffin, gluing fragments, alternate staining and many others. But it can be very disappointing when so much work is invested in the design of such products, and at the table the guests mercilessly break and eat them.

So that beauty not only decorates the festive table and basket for the church, but also pleases everyone for a long time, we suggest you create Easter eggs with your own hands from satin ribbons. The variety of options leaves room for creative ideas. Color combinations of ribbons and rhinestones, gluing beads and making small details - all this is a matter of your imagination.

Necessary materials

Having entered the sewing accessories store, you can immediately purchase everything you need to make an Easter egg from ribbons. You will need sharp scissors, satin ribbons (choose the width and colors depending on the type of egg), a set of sewing pins with flat heads (like carnations), foam egg blanks, double-sided tape. If you decorate the product with rhinestones or purchased insects, then you will need it. But for craftswomen who love to do needlework, such a tool should always be present. To create ribbon flowers for decoration, you may need a needle and thread and tweezers.

Preparation for work

Before starting any work, you need to think about how the product will look in its final version, whether the colors are combined with each other, how to place additional details decorating the egg. They can be made in advance by making a flower arrangement separately. It remains only to attach it to the Easter egg from the ribbons.

If you are working in the artichoke technique, then you first need to cut the ribbons into small pieces of the same length (2-2.5 cm). Leave the longer trimmings to decorate the bottom of the egg with ribbons. It is better to take the length of the ribbons with a margin, so that later the problem of a shortage of a certain color does not arise.

Artichoke technique

The name of this performance is given from the structure of the basket of a well-known vegetable, in which all the leaves are in the form of triangles, looking up with corners. The first step in decorating an Easter egg with ribbons is to close the top. On the foam egg we find a sharp top and cover it with a piece of tape of the desired color, catching the edges with pins. You can use tape.

The next step is to make the first circle of triangles. We take the previously cut pieces of tape 2 cm long and fold them so that we get a sharp corner. We put the triangle with the tip up and pin it with pins on both sides. Thus, we complete the first circle. Make sure that the tops are clearly connected.

Then we retreat down a short distance and lay out the next level. You just need to carefully monitor that the distance between the first and second levels of triangles around the entire perimeter is the same. Then the finished product will look neat.

Variations of products in the "artichoke" technique

An Easter egg with ribbons according to the master class is quite easy to make. It just takes diligence and patience. The variety of eggs made in this way depends only on the density of the rows and the color scheme. Easter eggs made of satin ribbons look interesting, which have a smooth color transition in circles. For example, the top of several layers is white, then light green, then light green, the next emerald and finally dark green.

The next option would be to alternate layers of different colors. They can be contrasting, but they need to be selected with taste. The option looks beautiful when the colors are combined vertically. Then, in the process of work, you need to alternately pin up triangles of different colors.

An Easter egg made of ribbons located at a close distance from each other looks beautiful and neat. The first row can be done by stepping back a little from the edge of the top. You can decorate eggs made using the "artichoke" technique only from below or from above. The top can be made a little differently by sticking a flower made of rhinestones or beads in the central part. A small flower assembled from petals on a thread will also look beautiful. From below, you can decorate with a beautiful bow or make a chain of two colors, assembled by folding two ribbons at a right angle.

Vertical design

The most diverse in the use of additional tools when making an Easter egg with your own hands from ribbons is vertical design. By applying tape from top to bottom, we get a flat and smooth satin surface. It is convenient to attach additional decorations from flowers, twigs to it, showing your imagination and skill in composing flowers from ribbons.

For this type of work, you need to have the following materials:

1. The thinnest satin ribbon, you can take several colors (optional).

2. Double-sided tape or pins with a bead on the end.

3. Glue gun.

4. Ribbons are wide for additional decorations.

5. Needle and thread.

Making the base

To begin with, we take double-sided tape and paste over the top and bottom of the foam egg. Then the tape is taken and the process of neat wrapping around the perimeter of the model begins. The distance between the rows should be the same. The tension of the tape is strong so that it does not move later and the white base does not peek out.

You can use the alternation of vertical rows with ribbons of two colors. To do this, two ribbons are taken at once and the egg is wrapped simultaneously in a circle with two colors located side by side.

You can alternate colors by sectors. But before changing the shade, you will have to glue a layer of adhesive tape for better fastening of the tape. The joints between the sectors can be wrapped with a contrasting tape, it will look original. Each sector can be decorated in different ways.

As you can see, this process is not difficult. The main thing is to pull the tape tight and make the distance between the layers more even.

Combination of techniques

There are product options where there are both vertical stripes and "artichoke" triangles. At the beginning of the design, the entire surface of the egg is covered with vertical stripes from top to bottom, using double-sided tape. The resulting egg is completely covered with the main color.

The next step is to decorate the bottom of the Easter egg with triangles. To do this, take again thin sewing pins (carnations with a thin hat). Artichoke triangles can be made by shifting each next row to the middle of the previous one, then the artichoke basket will look more magnificent.

We decorate the bottom with a bow of the same color. And the smooth upper part of the product can be decorated with additional, separately made flowers. You can stick flowers from pebbles, insert pins with colored beads at the ends. The design of each egg can be made to be different by alternating and adding different colors and shades.

Floral decoration

Easter eggs decorated with ribbons look very nice if they are additionally decorated with a pattern of flowers, beads, gluing rhinestones and pebbles of different sizes. You can make a green twig with leaves, on which to arrange small flowers. Insects glued next to flowers look beautiful. It can be butterflies, dragonflies, ladybugs. Flowers can also be made from satin ribbons, or you can use lace.

Ribbons can be either plain or patterned. But when working with decorated ribbons, it is advisable to combine them with plain ones so that the egg does not turn out to be clumsy and tasteless. The main thing in the manufacture of such products is not to overdo it with details. If there are too many additional elements, then the egg will not look aesthetically pleasing. You need to have a sense of proportion in everything.

If you have a lot of ribbon flower making skills in your assortment, then make several different Easter egg options. It is not necessary to attach all the details to one product.

Having created a whole dish of such Easter eggs, you can admire them for a long time, make a gift to relatives or decorate your workplace at work. They are stored for a long time, so you can put them away until the next Easter celebration in a box. By and large, making Easter eggs from satin ribbons, the master class for making which is presented in our review, is not as difficult as it might seem at first glance.

In another way, "kanzashi" can be called origami from ribbons. This technique was invented by geisha, who originally decorated their hairpins with silk elements.

The essence of the work is that various details are created from square pieces of fabric or ribbons - petals. They can be sharp, round or oval. Flowers, and sometimes even whole figures, are formed from these petals. Let's figure out how to make and decorate Easter eggs with your own hands from kanzashi satin ribbons.

Easter eggs from kanzashi satin ribbons

For those who do not know how to make a kanzashi Easter egg, it is better to first master the process of creating petals. In order to make them, it is necessary to prepare certain materials and tools. The main thing is to find good satin ribbons. You can choose ribbons with a width of one centimeter, as well as 2.5 and 5. The larger the squares, the more convenient it will be to work with them.

In addition, you will need a pencil for drawing on fabric and a ruler, or a square template pre-cut from cardboard with sides equal to the width of the tape. You also need to find threads to match the color of the ribbons, a needle, scissors and tweezers. You can fix the parts with any universal glue, but it is better to use superglues that dry immediately. To decorate the created figures, you will need rhinestones, beads, beads or small buttons. And you also need to prepare a lighter or a candle so that you can easily get rid of protruding threads.

Also, to make Easter eggs from satin ribbons, you will need a base, that is, an egg. Now wooden blanks are sold in stores, but you can also make a foam base, or papier mache. Here are some interesting ideas on how to make a beautiful egg using ribbons.

To make an egg that consists entirely of petals, you will have to work hard. First you need to purchase ribbons of different colors, but the same width. A bright figurine made of blue, pink, orange and purple ribbons looks very nice.

First you need to create round petals. To do this, cut the squares of the ribbons. To make it more convenient to work and the squares do not crumble, you need to hold them over the fire of a lighter or over a candle.

Now you can proceed to the design of the petals - for this, the square must be folded diagonally to make a triangle. Then the outer ends of the figure must be bent towards the middle. A rhombus-like shape is formed. After that, the figure must be folded in half to make a small triangle. On the one hand, it is necessary to carefully cut the corners and “solder” the remaining parts with the help of fire. Also, the ends can be connected with transparent glue.

After that, you can glue the petals on the egg-shaped blank. You need to do this in even rows, starting from the top. To make the egg look beautiful, only one end of the petals needs to be covered with glue. By the same principle, you can make eggs with sharp or double petals.

For those who do not want to mess around for a long time, we can advise you to make an egg with several colors using the kanzashi technique. To create such a craft, you must first wrap the workpiece with ribbons. To do this, apply glue to the sharp part of the egg and glue the end of a thin ribbon of any color. When the tape holds well, you can wrap the entire egg in such a way that the strips overlap each other a little. When the whole egg is wrapped, you need to fix the free end of the tape also with glue. You can make an egg loop so that it can be hung somewhere.

After that, you can start creating flowers. They can be collected from round or sharp petals. You can make flowers with seven or nine petals. It is also possible from oblong petals leaves. You can decorate such an egg with multi-colored beads.

Interesting ideas for creating decorative eggs

Based on the kanzashi technique, you can make the most unusual Easter eggs with your own hands from satin ribbons.

So you can try to simply paint the blank and glue several colors on the egg using the kanzashi technique.

Also, with the help of petals and a yellow ribbon, you can turn the blank into an Easter chicken. To do this, you will need petals for the eyes and beak, as well as large parts for the wings.

In addition to oblong-shaped petals, you can make details that are usually used to create roses. An egg completely strewn with delicate flowers will look very interesting.

Eggs made using the kanzashi technique can be decorated with bows of satin ribbons in a contrasting color, as well as beads or rhinestones. Gifts look beautiful, where the petals are strewn with beads. The main thing in this matter is to remember that everything must be neat. Therefore, it is better to take your time and choose a transparent glue so that there are no streaks and stains on the tapes.

Eggs made using this technique can be not only a great gift, but also a good decoration. You can make an Easter tree and hang it with your own eggs. And you can put the finished decorations on skewers and place them in small pots.

And here is a detailed master class on how to make an Easter egg using the artichoke technique.

Easter Sunday, the most beloved national holiday, will come very soon. And we are all already looking forward to it. And if it's too early, although we have already prepared for this, then it's time to show yourself in creativity. Especially when now there are just a huge number of ideas for this.

And when you come into contact with this, you want to do one, and another, and the third, and even the tenth ... After all, today we will have exactly 10 master classes on making Easter eggs with our own hands.

You can, of course, simply paint them in different ways, as is well described on the site https://mnevkusnotut.ru/raznoe/kak-pravilno-krasit-yajca-na-pasxu.html, but you can do this on the eve of the holiday. And today I propose to do art.

While I was preparing this article for publication, I was so impressed with all the works that I want to improve and create in each of the techniques proposed today. All the crafts turned out just incredibly beautiful. Some of them are quite simple and easy, others are more complicated and require certain skills.

But all of them have one thing in common - they are made with love and with the desire to create.

In the article we will consider techniques for working with ribbons, with beads, with napkins; we will make crafts from felt, fabric and thread. We will decorate them with improvised materials and special decorations. And in any case, the one who undertakes this business will receive great pleasure.

Master class for making an Easter egg from satin ribbons using the Kazan technique

Kazanshi technique is a subject of Japanese pride, a hobby that has now been elevated to the rank of art. And it is no coincidence that people from all over the world are so passionate about it.

From satin ribbons, with the help of glue, and a lighter, they make both very simple crafts and beautiful compositions that delight the eye. Today we will have a master class on making a beautiful stand for a festive egg. The composition is very beautiful. If desired, the stand can be made ordinary, and the festive attribute itself can be decorated with flowers.

We will need:

• satin ribbons of four colors, size 2.5 cm
• thin light ribbon measuring 0.5 cm
• wooden egg preparation
• stamens for flowers
• green felt
• beads
• cardboard
• scissors
• lighter or candle
• glue gun with sticks
• ruler

And of course, you need to stock up on positive and excellent mood.

Manufacturing:

For the composition we need to make 6 flowers. For each of them, you will need to make 3 pale pink petals, 4 bright pink and 5 petals of a darker color. That is, a total of 18 pale petals will be needed, 24 bright ones and 30 dark ones. Green leaves for each flower will need to be made in the amount of 3 pieces, and there should be 18 in total.

The sizes of ribbons for petals will be 2.5x2.5 cm, and for leaves 2.5x3 cm.

1. Cut the required number of blanks to a given size. Let's start with the petals for the flowers. On one side, cut off the corners, giving it the shape of an oval. We do not touch the other side.

2. Use a lighter or candle to process the cut edge.

At the same time, it gently bends down.

3. Tuck the remaining square edge into a corner and also process with a lighter to seal the edge. Then bend the second edge and also process with a flame. You should get a neat petal.

4. Thus, make all the blanks of the petals in the right amount.

5. Ribbons for leaves are slightly longer. Fold one of the blanks in half and cut off the corners, giving it the shape of an elongated leaf.

6. Treat the edge with a flame from a lighter or candle. But to make the leaf more beautiful, do it in segments. On each of the segments, slightly rotate the edge of the workpiece relative to each other in different directions. The leaf in this case will turn out with slightly curved edges and it will turn out more natural.

7. The final touch will be that along the fold line of the sheet we will also go through the flame from the lighter. Thus, the leaf will acquire a natural middle.

8. When all the petals and leaves are ready, let's start collecting our flower. To do this, you need to cook stamens. If you didn’t buy them in a store, then you can make them yourself by taking thin wire and corrugated paper.

Take one petal and place the stamens in it, cut off the excess from the bottom. Then apply a little glue from below and pinch with your fingers, setting the initial shape. Then glue the lower edge of the second light petal with glue and place it next to the first one slightly overlapping. Fix and stick.

The first row is ready. Now take 4 pink petals and similarly arrange them one by one - the second row, fixing the position of each with glue.

9. And we still have dark petals, there are 5 of them. We fasten them to our flower also with glue, overlapping slightly.

The feature of this series will be the following. We fastened the first two rows of petals, making the base slightly closed, and we open this row, that is, we fasten the petals with the reverse side. The photo shows how it should turn out.

10. Then we fasten three green leaves.

The first flower is ready. Similarly, we form the remaining 5 pieces.

11. For a souvenir, we will need to purchase a blank of a wooden egg in advance, it can also be made from another material. We will also prepare a light thin ribbon. We will need to wrap the object with it.

To ensure that the tape does not subsequently fly off, it is necessary to fasten it with glue at the top and bottom points with each new turn.

12. When you dress the workpiece in clothes, you can decorate it. Since we will use a chic stand, we will decorate the egg rather modestly. Namely, we simply stick a cross using special half beads.

13. The next step is to prepare the stand. It will be possible to make it from corrugated cardboard, in two parts. The bottom part should be 6 cm in diameter.

And the top one is the same, but in the middle it will be necessary to cut a circle 2.5 cm in size.

Glue cardboard to each other.

And also cut out two circles of the same size from felt, but with a small allowance for closing the cardboard seams. You can make them with a diameter of 6.4 - 6.5 cm.

14. First, glue the felt to the bottom of the cardboard, smooth it well so that the surface is even and smooth. Then apply glue to the middle of the front side, where we have formed a notch. Glue the felt well, forming a hole. Then apply glue to the cardboard by bending the felt, and then glue it around the entire perimeter. Then glue the edges so that there are no gaps left.

15. Glue the flowers evenly on the front of the stand. In this case, it is better to arrange them obliquely. So the recess inside will remain free. There we will place our craft later.

In order to stick the flowers evenly, first glue them on two opposite sides. And then place the two remaining flowers in between.

That's basically all, all the flowers are in their place, and the egg is perfectly located in the stand made for it. And such a composition is very pleasing to the eye.

In the Kazan style, not only coasters are decorated, but also the eggs themselves. And look at what wonderful work this turns out to be.

In both cases, the eggs themselves are wrapped in bright contrasting ribbons. And on them are the same bright and beautiful flowers and beads.

All work is done according to the same principle as our today's master class.

And in this case, not only the stand is framed, but the egg itself.

Video on how to decorate an egg with beads (with a weaving pattern for beginners)

Decorating an Easter egg with beads is not an easy task. This requires some preparation and some skill. Also perseverance and patience. What you need to get started.

• choose a knitting pattern
• prepare beads of the desired colors
• purchase a needle for beading, thin fishing line, or monofilament
• pick up an egg blank (it can be wooden, or plastic - from children's toys, or made of foam)

It is quite difficult to describe the whole process of this technique in words. Therefore, I suggest you watch a wonderful master class on how this is done.

This is just one of the options where a certain weaving technique is used. There are other techniques where the whole egg is braided, and the beads are placed one above the other.

Or the decoration is woven in the form of a net.

For each technique, schemes are selected. They can be found on the Internet. Each is designed for a specific pattern.

And no matter what technique you choose, this decoration of Easter eggs is always incredibly beautiful! Craftswomen who love beadwork and embroidery are also involved in decorating eggs. At the same time, fantasy simply has no boundaries.

Simple decoupage technique for decoration

This technique is quite simple and not at all difficult to perform.

We will need:

• boiled white eggs
• napkins with small patterns
• protein
• tassel

Manufacturing:

1. Boil the eggs in advance, then cool them.

2. First, break one of them and separate the protein from the yolk. All we need is protein.

3. Napkins with a beautiful pattern are usually three-layered. At the very top, there is a drawing. So we need to separate it from all other unnecessary layers.

Then carefully tear off the desired fragments with your hands. Of course, you can cut them off with scissors, but when you tear them with your hands, the edges turn out with fuzzy lines, and are less visible on the egg itself.

4. Put the desired fragment on the surface of the shell and coat it with protein. You can do this with a brush, or you can just use your finger. Then paste the next fragment in the same way. And so on.

5. Put the decorated copy on the wire rack so that the protein dries. This is especially necessary if the drawing is applied from all sides.

6. By analogy with the first copy, arrange all the rest. For each of them, you can use fragments from different napkins.

7. When the protein is completely dry, it will stick better than any glue.

For a better appearance, after drying, you can moisten a rag with vegetable oil and wipe our Easter decoration.

And to make it more clear, please watch a video shot specifically for the Secrets of Home Economics blog.

As you can see, everything is quite simple. And even a child can handle this technique. At the same time, he will receive a lot of positive emotions as a bonus.

Original Easter egg from ribbons in the style of an artichoke for a school contest

For a school competition, you can prepare such original crafts. They will certainly impress all the members of the jury. It has already been verified more than once that they invariably attract the closest attention with their appearance.

And every time you want to take such a craft in your hands and consider how everything is fastened and held there.

We will need:

• ribbons of two colors, 1 meter each
• styrofoam egg
• tailor pins
• scissors

Manufacturing:

To make crafts, we will definitely need a foam egg. The technique of working with satin ribbons in the style of an artichoke involves numerous fastenings with pins to its base. Namely, the needles are stuck into the foam without any difficulties.

1. We need ribbons about 2 - 2.5 cm thick. Cut them into pieces 5 cm long. You will need 20 ribbons of one color and 20 of another. And another piece in the shape of a square.

2. Place a square piece in the upper part of the workpiece in the very center. Attach it on four sides with pins. Set the fifth pin in the very center.

3. Fold one piece of the blue ribbon into a corner, point the top of the corner to the central needle and fasten it with two pins at the two lower corners.

Place three more of the same segment along the perimeter of the first row. All of them should be strictly oriented towards the center. And also fastened at the corners with pins.

The appearance of the entire craft will depend on how evenly it was possible to arrange the first row.

4. For the next row, we also prepare four blue segments and place them in the same way, but just below the first row.

3. The third row will consist of four white ribbons. But they should be placed in the gap between the blue ones. And in such a way that all seams and needles are covered.

That is, you should get a white row.

4. The next layer is blue again. And it is located in the same way as the blue ribbons, that is, under them.

5. And from this row we begin to alternate colors. The row is blue, the row is white. And so on, until we get to the bottom.

6. And here it will be necessary to make a stand. To do this, we attach a white piece of tape, but only the seam should be located downwards. After you have fastened the corners, you also need to fasten the protruding central corners.

There will also be 4 white segments in total.

The egg turns out to be truly festive. And this can be given to someone close to you.

And if you wish, you can combine two techniques for working with ribbons - Kazanshi and artichoke. And then you get such a chic craft.

I think, according to the description and photo, you understood how to work in this technique ?! And if so, then you can easily create any beautiful image that pleases the eye and soul.

Therefore, feel free to take these performance techniques for exhibition work for the competition. And if you try, then you will be successful.

Beautiful design of Easter pasta crafts

We have already considered how to make Easter pasta crafts. And in principle, everyone most likely figured out that there is nothing complicated with this either.

There are two options for completing this task. At the first, we need a balloon that inflates to the desired size. Then glue is applied to it in separate sections. And then pasta of a certain shape is glued onto the glue. After manufacturing, the mold is given the opportunity to dry, then the ball is pierced, or simply blown away. Then it will need to be removed.

But some caution is needed here, since when the ball is lowered, and even more so when it is pierced, the structure may not withstand and break. After all, we glued the details directly onto the ball. Therefore, the form is often incompletely filled out. A decent gap is left through which the ball can be easily and accurately removed.

The second option involves sticking pasta on a form that will not be subsequently removed. This form can be wooden, plastic or made of papier-mâché.

It is better to apply pasta on such a form with a glue gun with rods. In this case, the product only needs to be allowed to dry and that's it.

In both the first and second versions, the craft is covered with spray paint. Mainly use gold and silver color.

Or they leave it natural, but individual parts are pre-painted with contrasting paints, and then glued on top of the main form. For example, as in this composition.

For its manufacture, a balloon was taken. Pasta of the same type was glued to its base and to each other. When the design dried up, the ball was removed. Pasta of a different format was painted with nail polish and beautifully decorated the composition with them.

And this is the final masterpiece.

How to beautifully decorate holiday eggs with threads

Threads are another affordable material with which you can make holiday egg crafts. In this case, there are two main ways.

• when the egg blank is simply braided with threads of one or more colors. The pattern turns out different depending on the imagination of the master. The color of the threads in this case can be either one color or several.

• a method in which a small balloon is braided with threads. Fixation occurs due to PVA glue.

Both methods are in demand and beautiful. The first is clear, and the second let's look at in more detail.

We will need:

• threads
• small balloon (or several)
• PVA glue

Manufacturing:

1. In a bowl, mix PVA glue and water so that the mixture is slightly watery.

2. Prepare the threads. They can be of any thickness and any color. But it is worth noting that the thinner the thread, the longer it will need to be wound.

Very beautiful crafts are made from threads that are used for knitting.

The threads can be pre-cut into long pieces, or you can wind them directly from the skein. Here you can choose the method that is more convenient for you. The thread that we will wind must necessarily be moistened with a glue base. If the threads are cut, then they can be immediately moistened, it will be convenient.

And if you decide to wind it on the ball directly from the skein, then you need either an assistant who will “bath” it in glue, or you need to adapt to do it yourself.

3. And we also need a blank, for which we will form a craft. A small balloon is perfect for this.

4. And so, everything is ready for us, and you can start creating. Everything is very simple here. The thread soaked in a mixture of glue and water must be wound around the ball in random order. It should be applied quite densely over the entire area, so that subsequently a sufficient shape is formed that will hold without a ball.

5. After this task has been completed, the threads must be dried. Typically, this takes 24 hours. After the allotted time, we will see that the craft has acquired a solid form.

6. Pierce the ball with a pin and carefully remove it through the remaining holes. You can pick it up with your fingers or tweezers.

That's all. The craft is ready, it turned out very beautiful. As a rule, it is left in this form. But it happens that ready-made flowers, dragonflies and butterflies are attached to the product. In any case, it turns out pretty nice.

Such eggs are laid out in vases, or hung in a room, creating compositions from crafts of different colors and sizes.

DIY Easter crafts from felt

This craft can also be classified as not difficult. Even a novice craftswoman will cope with the task. And also such products can be made by a child, either independently or under the guidance of his mother.

The activity is very exciting, and the crafts are simply wonderful.

We will need:

• felt of different colors
• threads in the color of felt
• needles
• beads, buttons, ribbons, lace and other decorative elements
• any stuffing material (synthetic winterizer, holofiber, fluff)
• scissors

Manufacturing:

1. Cut out a blank for the future egg from paper or thin cardboard. According to this form, we will cut the main details, that is, the halves of the product.

2. Put the prepared template on the felt, trace the outline with a pencil and cut out two halves.

3. From felt of other colors, cut out details for decoration. They can be different, as a rule, these are contrasting straight or wavy lines. Pick up threads of a suitable color and sew the details with a regular stitch seam onto the front surface of one of the blanks. Or just glue the parts with glue.

Sometimes, to hide the seam, a lace ribbon or other decorations are put on it.

Thus, arrange the front part of the workpiece to your liking. If desired, beads, small buttons, or small details of flowers can be placed on it.

4. Fold the two main parts and overcast them with a contrasting or tone thread. At the top, leave room to insert the filler into the middle. Then sew up the left hole in the same way. If you plan to hang the products, then sew a ribbon on top.

In this way, you can make many different Easter crafts that are nice to give to your friends and family.

Original decoration in kinusaiga technique

And this technique is again Japanese, it was born there and now needlewomen work with pleasure in it. The most important Easter attribute was not bypassed. Let's get acquainted with this style of work.

In fact, this technique is the compilation of a kind of mosaic of fabric, and it can be compared with the familiar patchwork. That is, the mosaic is made according to the principle of how patchwork quilts were sewn before. But the peculiarity is that the parts are not sewn together, but are connected to each other without a needle. Interesting?!

When I got acquainted with this technique, I paid attention to the workshop of Tatyana Ulanova. And according to her work, I would like to introduce you to this method of registration.

We will need:

• styrofoam egg
• pieces of cloth
• PVA glue
• scalpel or sharp knife
• toothpick, or nail pusher, or scraper
• paper
• pencil

Manufacturing:

1. The first thing to start with is the idea of ​​what kind of picture you want to see in the end. There is a very simple design in which the egg is decorated with a geometric pattern. But we will consider a more complex picture. And having understood how it is done, you will make a simple one just for one or two.

2. The drawing can be drawn on paper, the one you want. It should be very simple so that it is easier to transfer it to the egg preparation.

3. After the picture is ready, cut out the details. Then attach them with safety pins to the form and redraw with a pencil. In this case, it is better to press harder on it, so that not only a trace of graphite remains, but also a trace of pressure.

4. After the drawing has been transferred, it should be pushed even more clearly. And do not even push, but make a cut with a scalpel, or a sharp knife. It is easier to cut straight lines with a knife, and rounded ones with a scalpel.

On the areas free from the pattern, also apply geometric lines, and make cuts along them.

5. Prepare the fabric and transfer the details from the pattern onto it, leave seam allowances of about 0.3 mm, or a little more.

6. Place a piece of prepared fabric in place in accordance with the pattern, and using a toothpick, or a pusher or flat-head manicure tool, push the allowances into the cut out recess.

Thus, push the ends of the fabric around the entire perimeter of the pattern.

7. Do the same with the rest of the details.

In order for the parts to hold better, you can add a little glue there when you put them in the crack. Glue is taken with the same tool as you push the fabric.

8. And we still have empty spaces between the pictures.

Therefore, cut out the background pieces, choosing the right color and fix them in their places in the way already described.

This is how you can create a magnificent picture without a thread and a needle.

And if you don’t want to cut out complex shapes, then you can choose a few pieces of beautiful fabric, and make the design of the craft in this way.

Or come up with your own design. When the basis of technology is understood, fantasy becomes simply limitless.

Video on how to decorate a Faberge egg with embroidery

Faberge eggs can be made in absolutely any technique proposed today.

The main thing to remember is that such a craft should differ from others in sophistication, style, and, if possible, a large number of decorations. And it should be a chic work in all respects.

Here is one of these chic crafts and I would like to bring to your attention.

When you see the end result, it may well seem that such work is simply impossible to do. But why not, a little perseverance, diligence and a desire to repeat it, and such beauty will show off on your holiday table!

And if you present such a thing as a gift, then I think that Carl Faberge himself would not refuse such a present.

Schemes for crocheted crafts with a description

And if you are a big fan of crocheting, then you will certainly be interested in the proposed work and patterns. Crocheting is very exciting and all the work looks very beautiful.

The most difficult thing in crocheting holiday “clothes” for the main attribute is to calculate where to add loops and where to subtract. Sometimes this makes the job difficult. Therefore, schemes are used where everything has already been calculated.

However, this also does not always help. The thread has different thicknesses and different textures, so in one case the circuit will exactly fall into the indicated dimensions, and in the other case there will be difficulties. Therefore, pay attention to whether these parameters are included in the description.

Because of these thread parameters, one garment is lacy and light, while the other is warmer, just right for the cool Easter spring.

I picked up some crochet patterns. I suggest you look at them. If you knit, you will be able to understand the icons and symbols.

And for this scheme, a thinner thread is required. And the performance itself is light and lacy.

This product is made in the form of a bag with ties. When there is such a decoration, then the eggs can not be painted. Just boil and place inside. Put it in a basket and it will look incredibly beautiful.

Or like this. Pretty good too.

And by attaching a thread on top, you can hang crafts for it and thereby decorate the house for the holiday.

Or knit these funny souvenir bags. They knit pretty easily. And it will be nice to present an egg in such a package as a gift, as well as to receive it.

Of course, it is difficult within the framework of such an article to show and tell how to crochet an “outfit” for eggs. If you know how to knit, then most likely you already understand how and what needs to be done. And if you don’t know how, then you won’t be able to read the diagram at first. And first of all, you need to learn how to crochet.

But it's worth it. Look how beautiful it turns out.

In general, like all other design methods proposed today. If you treat what you do with love, then you can create a real creative masterpiece from any material.

Namely, this is how you should treat crafts for Easter Sunday.

I congratulate you on the upcoming holiday. I wish you health, joy and prosperity. And also success in creativity.

All the best!

The presented Easter product in the shape of an egg, decorated with beautiful kanzashi flowers, will surely inspire you for new creative experiments. Let's start the holiday master class with a detailed list of necessary accessories. It is imperative to study it, especially for beginner craftswomen, in order to rationally distribute materials. You can exactly repeat the same egg for a festive table decor or as a gift, or change the colors of the base ribbon, flowers and stand. You can complete the accessory, focusing on a detailed master class. A creative lesson does not require much from you, all steps are easy to complete.

To make the same Easter decoration you will need:

• - for the leaves of the nest, pieces of green satin ribbon measuring 1.2 * 5 cm - 24 pieces;
• - double-sided red stamens for the stand - 12 pieces;
• - for flowers, squares of yellow ribbon measuring 2.5 * 2.5 cm - 15 pieces;
• - for buds, pieces of green satin ribbon measuring 1.2 * 8 cm - 3 pieces;
• - for the centers of flowers, unilateral red stamens - 9 pieces;
• - green felt base for a nest with a diameter of 3.5 cm;
• - decorative wooden egg;
• - to cover the egg white satin ribbon 0.5 cm.

Easter egg - execution steps

1. Use all the prepared green segments of the rectangular satin to create leaves of an unusual oblong shape. Bend the rectangles along the center, leaving the wrong side of the satin inside. Bevel one side with scissors literally 2-3 mm. Then singe the beveled edge and fasten the hot satin with your fingers. Leave the burnt part in this position, and turn the bottom one forward. Wrap the two corners of the bottom side into the workpiece, forming a sheet of sharp unusual shape. In the center, the sheet should expand, and at the edges it should narrow.

2. Make 24 leaves out of green rectangles. They will be spent on two layers of the base. But you can make more layers if you wish.

3. Cut out a felt circle (preferably green). Glue the first layer of leaves in a circle. They should stand side by side, without gaps. Glue a stamen with red heads on top of each sheet, having previously bent each. The red color will stand out against the background of greenery, so the composition will become elegant. These balls look like ripe berries.

4. Glue the second row of greenery, it is better to offset each leaf in the gap between the first two to get a lush effect.

5. Prepare the central egg. Stick a ball of white satin on it, evenly distributing the turns.

6. Make convex yellow blanks for flower petals from squares. Bend the squares diagonally, fold again, close the sharp ends together and turn the resulting leaves inside out. Focus on the photo. Petals are made according to the method of modeling ordinary single sharp parts.

7. To simulate three bright inflorescences, prepare 5 yellow petals and 3 bunches of red stamens (of three pieces).

8. Also separate the strips of green satin ribbon prepared for the sepals diagonally with a soldering iron. Cut them up and use only one piece.

9. Open the sepal and insert a flower with a red core into it, after gluing the parts in a circle.

10. Three main details for creating an Easter souvenir - a green nest decorated with a ribbon, a wooden egg and three bright flowers.

11. Glue the flowers to the egg for a beautiful arrangement of your own. Instead of intermediate leaves, you can use the rest of the cut green ribbon that remains after sepal separation. Arrange the leaves between the flowers so that the sharp tips show through beautifully.