Velvet gel nail polish. Velvet sand nail design. Step-by-step decoration with gel polish

It is important for any woman that her hands are well-groomed, with a beautiful, neat manicure. The modern nail service industry offers a wide variety of technologies and materials for creating an original, fashionable manicure. Nail design Velvet sand is a new, unusual and very interesting type of modern manicure. This design is done differently on natural nails, on extended nails, and velvet sand can be applied on gel polish.

Manicure with velvet sand can be combined with other modern stylish technologies: hand-painted nails, liquid stones, veil.

Technological features of nail design with velvet sand

Velvet sand looks like medium-ground powder. This is a special acrylic material, finely crushed to powder. Sometimes this powder is called “acrylic sand”. Sand is most often applied on top of dried gel polish to achieve a velvet effect. In this case, the nails are not covered with a finishing fixative to preserve the velvet texture.

Velvet sand is available in a wide variety of colors. There is even transparent sand, which can be used to achieve a “sugar” effect without affecting the color of the main coating.

Grains of velvet sand are applied to the nail plate easily and evenly. This manicure is suitable for both an everyday look and an evening out.

Sand grains can be large or small. Coarse sand looks like small balls; this sand is used to accent one or more nails. Working with coarse sand is much more difficult than working with fine sand.

The middle fraction is most often used; a large number of nail designs are presented with this sand.

Benefits of manicure with velvet:

Required tools and materials

To make the design with velvet sand neat and durable, you need to use gel polish or gel paint. Acrylic powder will quickly fall off from ordinary varnishes. In addition, a beautiful three-dimensional pattern with velvet sand is formed because gel polish and gel paint have a denser and thicker consistency.

For manicure you need the following tools and materials:

Velvet sand application technology

Before moving on to the step-by-step instructions described below, it is recommended that you familiarize yourself with how to use velvet sand:

Step-by-step instructions for making a velvet design

First you need to choose what kind of nail design you will have: which nails will have the design on them, and which nails will be completely covered with sand. Next, the manicure itself is performed.

The nail plates are lightly sanded with a special file.
Nails are treated with a degreasing solution.
Next, the nails are covered with a base coat, and the nails are dried in a UV lamp.
Gel polish of the selected shade is applied to the nail plates in 2 layers. Each layer is dried in a lamp for several minutes.
The color is fixed with a topcoat, the nails are dried in a lamp and after that the stickiness is removed from the nails.
With a thin semi-dry brush using gel paint, a design is applied: monograms, curls, patterns, flowers, ornaments.
Acrylic powder is poured in a thick layer onto the undried gel paint. The grains should completely cover the design.
Nails are dried in a lamp for 4-5 minutes.
Use a fan brush to shake off excess sand.

The process of applying sand is quite simple, the biggest difficulty in it is carefully applying the design to the nail plate. By following all the rules for applying gel polish and drying your nails in a lamp, you will get a wonderful DIY manicure with velvet sand.

Well-groomed nails- This is the calling card of every female representative. To create an elegant manicure, special jewelry or varnish application techniques are often used.

One of them is velvet sand on nails, which helps create a uniquely beautiful design. The world of the nail industry, which never ceases to amaze its fans with new products in the field of exquisite and original nail design.

Recently I pleased fashionistas with such nail art as a velvet manicure. Nails painted using this method are a real an example of a bold and extraordinary style. A similar design is made using flock or sand.

Velvet sand- this is a special powder for nails, it looks very similar to the glitter we are all familiar with, but has a more pleasant structure.

This innovation appeared in cosmetic stores relatively recently, but immediately became popular with fashionistas. The main advantage of this manicure is beauty.

On nails this texture looks very unusual and stylish. Contrary to the opinions of many girls, you can do a “velvet sand” manicure on both natural and extended nails. At the same time, you can use both professional and ordinary ones.

This sand was specially designed to create a special decor when applying a design using gel polishes, but regular varnishes also perfectly complement it. In addition to a noticeable soft effect, a manicure created using this material differs in volume and special durability, despite the fact that in most cases no topcoat is applied at the end.

After all, when answering the question of how long such a design lasts, the masters guarantee that the result will be maintained on time from a week to a month. However, this is not the only advantage of the material in question and the technology of its application.

Step-by-step application technology

Before you make velvet sand on your nails, you need to decide what kind of technique closer to you.

Can be done solid pattern on all (or all) fingers.

Or you can decorate only some parts of the nail plate.

For example, draw abstract lines or other designs on them.

For regular varnish

Step-by-step instruction velvet manicure:

Clean your nails old varnish, if necessary, give them the desired shape.
After this, apply the first coat of varnish. The base can be any color, but it is advisable to use transparent. Still looks good contrasting color in relation to sand.
Next, apply a layer of varnish again, and until it dries, sprinkle it generously with sand. Now we have to wait.

The main disadvantage of manicure using velvet sand at home is that it is difficult to understand whether the nail is dry or not. We recommend waiting at least 10 minutes in a warm room and about 15 in a cool room.

After this, use a stiff manicure brush to sweep away individual grains from your finger, shape the pattern.
If necessary, sand can be covered on top shellac, so it will last longer, but will become less structural.

Of course, your manicure will be more durable if you use gel polish, but in this case you simply need an ultraviolet lamp. With its use, the technology changes a little.

For gel polish

Clean the nail and paint it with the base color. After that, draw any pattern, such as a flower. Nice sprinkle this drawing with sand, if necessary, you can lightly press the grains with a bamboo stick, but then you may lose the volume of the pattern.

After applying velvet sand to your nail, you need to place your finger under ultraviolet rays for a couple of minutes to allow the polish to dry. After this, shake off the remnants of the textured decoration from the surface of the nail plate, apply a couple of drops on top of the sand fixative gel. If you cannot do a manicure with liquid stones, then this is the best option to replace this style.

Watch the video for a master class on applying velvet sand to gel polish:

Many reviews claim that when worn carefully, velvet sand hardly suffers, only if you buy a white product, then on the nails it becomes a slightly darker shade.

Tips for creating stylish manicure:

For creating classic look with a little twist, make a traditional French manicure on your nails and decorate the tips of the nail plates with white sand. With this design, silver rhinestones would also come in handy.
When working with sand, do not skimp on it. Sprinkle a lot remedy for fingers.
When applying you need press lightly powder, so it will stick better.
Experiment. Draw uneven lines, combine two or more shades.

Price

Price velvet sand in Russia starts from 50 rubles per 5 grams. As for the cost of manicure sand in Ukraine, the price threshold here starts from 16 hryvnia for the same quantity.

Luxury brands of velvet sand will certainly be more expensive than economy class sand. The difference in cost is due to quality velvet sand, its durability on nails, as well as the composition of components that affect its structure.

In search of new original solutions for manicure, girls use the most unusual materials and decorative elements. One such solution is the use of velvet sand.

Outwardly, it looks like coarsely ground powder; if desired, you can make it shiny or add other decorations.

We invented velvet sand for use with gel polishes. Despite the fact that a top coat is not applied on top, the manicure is voluminous and long-lasting.

The advantages of the coating include ease of application, and the use of special tools is not required.

Even a novice master can create a manicure with this material at home.

Velvet sand, similar to colored dust, is applied to the wet gel polish. This produces a coating reminiscent of fabric - velvet.

The grains lie on the nail evenly and easily. This manicure is suitable for both everyday life and special occasions.

Sand can be of large and small fractions. The large one looks like balls and is usually used to highlight one or two nails. It is more difficult to work with than with fine sand.

The most common middle faction, with it you can find many interesting ideas on marigolds.

The latter is called flock, in beauty salons it is applied with a special device - a flocker, it distributes the powder evenly and the manicure is almost perfect. If there are no such tools, you can pour the material using improvised means.

Advantages:

unusual coating design, which can be achieved using sand fraction,
durability of manicure - you can safely do cleaning, wash dishes, but it is better to use protective gloves,
ease of technology - even if this is your first time picking up gel polish with sand, your manicure will most likely be successful,
You can buy consumables in stores for manicurists and online.

The cost of one jar of velvety powder starts from 60 rubles. The smaller the grains of sand, the neater the manicure will be.

If you cannot find everything you need for such a manicure, you can use scrapbooking powder - it is sold in craft stores. Coarse acrylic powder is also suitable.

How to make gel polish design with sand - instructions

VIDEO INSTRUCTION

To create a design with a velvet coating, you must follow this algorithm:

Prepare the nail plate: remove the cuticle, give the nails the desired shape, remove the lipid layer with a buffer, apply a primer.
Apply base coat and dry it.
Apply gel polish in two layers, dry each layer under a UV lamp.
We fix the color with a finishing layer, dry it and remove the stickiness.
Let's start drawing. In our example, the pattern is curls - this is the simplest pattern for initial drawing. For elegance of execution, it is better to use a thin brush. Drop the desired color of gel polish onto the foil and paint with a semi-dry brush (as in the photo).
After finishing the sketch, pour acrylic powder onto the wet, undried pattern. It is very convenient to work as a pusher, picking up sand as if in a spoon. Sprinkle it, sparing no material, so that the grains completely cover the pattern. It is better to do this over a jar so that you can immediately shake off the excess into it. Now you can dry the marigolds for three to four minutes. When the pattern has set, brush off the excess sand. Manicure with velvet sand is ready.

Little tricks:

It is very convenient to make a drawing with gel paint, since it does not flow and remains voluminous.
The design may “slide” along with the powder due to poor drying - longer drying under a lamp will help to avoid this. This is especially true for colored acrylic powder and dark-colored powder. You can also wait a little for the powder to absorb, and only then put your hands under the lamp.
In the case of gel polishes, drying for 2 minutes in an LED lamp and 4 minutes in a fluorescent lamp is sufficient; if gel paint is used, then 1-1.5 minutes in an LED lamp and 6 minutes in a fluorescent lamp.
Check the condition of the lamps in the fluorescent lamp - the old ones dry poorly and therefore require replacement.
To make the design less dirty, use a base for regular varnish. It is liquid, lays down in a thin layer, and dries quickly. Apply it in a thin layer to the pattern with a semi-dry brush, trampling it in a little. It will flow between the grains and dry as an invisible film. Under such “protection” the roses will not lose their velvety texture, but will not get dirty.

Some useful tips for those who decide to design with a velvety surface:

- You can give a classic French jacket a twist by decorating the tip of the nail with white sand and silver rhinestones,
- do not skimp on the material, pour it in large quantities,
- It is better to place the main emphasis in manicure on the velvet coating, and not on varnish,
- dry the velvet sand thoroughly under a UV lamp,
- combine different shades, apply patterns - experiment.

VIDEO DESCRIPTION

Manicure options with velvet sand

There are a lot of ideas for implementing a manicure with a velvet pattern.

Let's consider popular options for creating original patterns using this material.

Red varnish and sand. This manicure option will turn any shy girl into a fatal beauty. Red gel polish will always be in fashion, and if you decorate one or more nails with velvet sand, the manicure will turn out to be unusual and bright.
Black varnish and sand. For some, black may seem too aggressive, but in combination with golden or silver velvet sand it will look elegant and stylish.
Colored varnish and sand. If you like bright colors or want to attract attention to yourself, try combining colored gel polishes and sand. The scope for experimentation is incredibly huge, so you can safely experiment.
Winter patterns - braids. Manicures with this pattern are most often done in the winter season. In order to emphasize the beauty of the pattern, it is sprinkled with velvet grains.
Wedding manicure. Brides often ask artists to create designs on their nails in the form of flowers and abstract patterns using white varnish. By sprinkling the designs with sand, you can easily emphasize individual patterns and place emphasis on the ring finger.

Contrary to popular belief, this manicure is very comfortable to wear and will last as long as gel polish.

You can remove it with a special liquid for removing gel polishes; a specialist in the salon will cope with this task in 10-15 minutes.

Sand manicure is a type of nail art, which is usually created using a special powder called velvet sand. Externally, the powder resembles nail glitter, but has a smoother and more pleasant texture. This innovation appeared relatively recently, but has already managed to win the love of fashionistas. You can perform a manicure called “velvet sand” on both natural and extended nails.

Advantages and disadvantages

The main advantage of this nail art is its beauty and unusualness. Sandy nail polish looks very stylish and gives the look a light festive touch.

In addition, sand manicure will delight you:

The disadvantages of sugar nail art include:

Application secrets

To make a manicure with sand polish stylish and durable, you should adhere to certain rules:

Performing sand nail art

You can do this manicure in several ways:

Using powder. In this option, painted nails are dipped into a container with special sand or sprinkled on top. The powder has several types, differing from each other in the size of the grains: very small ones give the nails the appearance of velor, and large ones look like granulated sugar.
Using sugar varnish, otherwise called liquid sand. This coating is somewhat thicker than regular varnish and is very convenient to apply, since liquid sand does not tend to creep onto the cuticle. The manicure will look especially impressive if the coating contains glitter or shimmer.

Instructions for making will vary depending on what materials you prefer to use and what result you want to achieve. Below are just a few design variations.

Manicure with regular polishes

For this nail art you will need:

base coat;
colored varnish;
velvet sand for nails;
brush to remove excess;
fixative

The design is carried out as follows:

Manicure using acrylic paints

This technology will be useful for girls who can draw. To do this manicure, you need to stock up on:

base coat;
colored base varnish;
acrylic paint (preferably white);
thin brush for painting;
velvet sand;
manicure brush;
fixer.

The technique is very similar to that described above:

This design option will last much longer than one made with conventional varnishes, and it is no more difficult to make. You will need the following materials:

base;
colored gel polish as a base;
polymerization lamp;
orange stick;
nail powder;
top coating.

Beautiful manicure

If you love and know how to create patterns on your nails, you can mix velvet sand with gel polish and use a thin brush to create designs with this mixture. In this case, after applying the colored base, you will need to dry it in a lamp, and then draw the desired pattern on the nails. The design is also polymerized in a lamp and covered with a layer of topcoat.

There are countless variations of sand manicure - it all depends on your imagination and skill. Having gained a little experience, you can create real masterpieces on your nails.

Well-groomed nails are the calling card of any female representative. To create an elegant manicure, special jewelry or varnish application techniques are often used. One of them is velvet sand on nails, which helps create a uniquely beautiful design.

What is manicure sand

Velvet sand is a special powder for nails; it looks very similar to the glitter we are all familiar with, but has a more pleasant structure. This innovation appeared in cosmetic stores relatively recently, but immediately became popular among fashionistas.

The main advantage of this manicure is beauty. On nails this texture looks very unusual and stylish. Contrary to the opinions of many girls, you can do a “velvet sand” manicure on both natural and extended nails. In this case, you can use both professional and ordinary varnishes.

Advantages of velvet sand:

Beauty. Outwardly, it resembles very small, low-abrasive sand on the nails; with the right color combination, it looks very extravagant;
Durability. This pattern is practically no different from the equally popular liquid stone. You can safely wash dishes, floors, play with children without fear of damaging your manicure;
Availability. Now almost every offline cosmetic store and the Internet has such sand.

Video lesson: how to do a manicure with velvet sand

How to do a manicure

Before you make velvet sand on your nails, you need to decide which technique is closer to you. You can make a continuous pattern for the entire (or all) fingers, or decorate only some parts of the nail plate (say, draw abstract lines on them).

1 method

Step-by-step instruction velvet manicure:

Clean your nails from old polish and, if necessary, give them the desired shape;
After this, apply the first coat of varnish. The base can be any color, but it is advisable to use transparent. A contrasting color in relation to the sand also looks good;
Next, apply a layer of varnish again, and before it dries, sprinkle it generously with sand. Now we have to wait. The main disadvantage of this manicure at home is that it is difficult to understand whether the nail is dry or not. We recommend waiting at least 10 minutes in a warm room and about 15 in a cool room;
After this, use a stiff manicure brush to sweep away individual grains from your finger and shape the pattern;
If necessary, the sand can be coated with Shellac on top, so it will last longer, but will become less structural.

Of course, the manicure will be more durable if you use gel polish, but in this case you simply need an ultraviolet lamp. With its use, the technology changes a little.

Photo - How to make velvet sand on your hands

Method 2

Clean the nail and paint it with the base color. After that, draw any pattern, such as a flower. Sprinkle this pattern thoroughly with sand; if necessary, you can lightly press the grains with a bamboo stick, but then you may lose the volume of the pattern.

After applying velvet sand to your nail, you need to place your finger under the warm rays for a couple of minutes to let the polish dry. After this, shake off the remnants of the textured decoration from the surface of the plate; apply a couple of drops of fixative gel on top of the sand. If you cannot do a manicure with liquid stones, then this is the best option to replace this style.

Many reviews claim that when worn carefully, velvet sand hardly suffers, only if you buy a white product, as in the photo, it becomes a slightly darker shade on the nails.

Adviсe to create a stylish manicure:

To create a classic look with a little twist, make a traditional French manicure on your nails and decorate the tips of the plates with white sand. With this design, silver rhinestones would also come in handy;
When working with sand, do not skimp on it. Sprinkle a large amount of product onto your fingers;
When applying, you need to lightly press the powder, so it will fix better;
Experiment. Draw uneven lines, combine two or more shades.

The average cost of sand on the Internet is from 50 rubles per 5 grams. The Amy brand, which is a professional nail art product, is very popular.