What if the jeans are too big. How to make fashionable skinny jeans out of wide jeans

Life does not stand still, and we are constantly changing. Weight fluctuations of 2-3 kilograms monthly are considered normal by doctors. But what if you lost weight, and all the clothes became great? How to sew in jeans, skirts and trousers so as not to spoil the thing and wear it with pleasure for a few more seasons? The basic recommendations for reworking things from the wardrobe will depend on the original model and the number of extra centimeters that you need to get rid of.

How to sew jeans from the bottom

Adjusting the width of the trousers is suitable if you decide to change the style of an existing model. With it, you can turn a flare into a straight cut. Very simple. Turn them inside out and put them on. Ask a relative or friend to help you and pin both legs evenly on both sides from the knee to the very bottom. Sew both of them along the marked lines. After that, stepping back one centimeter from the line, cut off the excess fabric. Finish the allowances with an overlocker.

How to sew jeans at the waist

If your trousers fit perfectly on the hips, and bulge a few centimeters at the waist, then you need to reduce the size. Alteration options will depend on the amount of excess volume. If the difference is only a couple of centimeters, then you can simply insert a wide elastic band into the belt. It evenly distributes the excess volume along the entire length. To do this, on the wrong side of the belt, make an incision on each side. Insert an elastic band of the desired size and sew at the cuts. After that, sew the belt.

How to sew jeans 5-7 centimeters? In this case, you will have to work hard. First, support the waistband on the back halves between the side seams. Put on your jeans inside out and zip up. Your assistant should use needles to stab two tucks, placing them at the same distance from the middle seam. Remove the jeans and sew the marked parts. Bend them to the middle, iron them and with threads of a suitable color, lay the finishing line, fixing the tuck from the outside. Open the middle loop and cut the waistband in half. Pin it to the sewn-in jeans and, after measuring off the excess fabric, cut it off. Sew two pieces of the waistband and iron the seam allowances. Sew on the belt. Close the seam with a loop.

What if you need to downsize your trousers by 3-4 sizes? How to sew jeans on your own? In this case, you will have to rip off the belt along almost the entire length, leaving intact 10 centimeters from the button and loop. To remove such a volume in each leg, you can use two methods.

You will need to open the side and crotch seams, while not touching the middle seams of the front and back. Using a pattern of a suitable size, we draw new contours of the side cuts on the jeans and adjust the step seam. Cut off the excess fabric and sew them again. We process allowances with the help of an overlock. On the sides we lay the finishing line with threads of a suitable color. Cut the belt in half. We remove the extra centimeters and sew it again. We iron out the allowances. Sew the finished belt to the jeans.
This method is perfect if embroidery or other decorative trim is made along the side seam. To begin with, we rip off the belt, leaving 5-7 centimeters from the beginning. To reduce each leg by 10 centimeters, we will make decorative seams in the front and back along the entire length. We put on jeans turned inside out. Visually divide the front of the leg in half and, having measured 2.5 centimeters on each side from the middle, we fix it with needles. We do the same procedure with the back. Carefully remove jeans. We lay a line along the intended line and remove the needles. Cut off 1.5 centimeters of fabric, leaving a 1 centimeter wide allowance. We process the edge with the help of an overlock. Turn jeans right side out. We bend the allowances to the crotch seam and lay the finishing line on the front side. After that, we reduce the belt by the required number of centimeters, cutting out an unnecessary piece from the middle. We sew the belt. Iron the seam and sew it to the jeans. We hide the seam behind the middle loop.

Even if you are a happy owner of a super-standard figure, you must have wondered at least once: how to sew in jeans? And it’s not at all about those cases when the thing was bought out of size. It happens that it is difficult to pick up tight pants for thin legs. It happens that the model is not satisfied with the width of the trousers. And there is also such that jeans fit perfectly, but they are a little puffy at the waist, the reason for this is the features of the figure.

So, if you do not know how it is at home, this is not a reason to carry them to the atelier. They charge so much for such a service that it’s easier to buy new ones. Decided! We take out a sewing machine, threads, tailor's chalk, scissors and tailor's pins (those with round heads).

That depends on the place that we want to reduce. You can do this in three places - in the back of the belt, on the sides and the legs at the bottom.

The first case is "your" if you have a strong deflection in the lower back, then even the tightest jeans at the back of the waist are a little puffy. To get rid of this defect, we take the following steps. We rip the back seam, cut the belt lengthwise, after rebuffing the belt loop (belt loop). Before unripping, you need to measure how many extra centimeters you need to remove. We divide these centimeters by two and draw with chalk on each side how much needs to be removed. The line goes from top to bottom, gradually disappears to "no" towards the end. Before cutting off excess fabric, measure how many centimeters are taken for allowances on the left and right (usually these are different values).

So, the excess fabric is cut off, according to the measured allowances, we combine the parts, sweep, sew, fold inward O Lsh allowance, stitching. Turn out to the front side.

We cut off the excess fabric from the belt, sew the belt, sew the loop back. Ready! By the same principle, jeans are sutured from the sides. Only the side seams are ripped, of course, the belt is cut on the sides. We cut off the excess fabric, re-sew the side parts and the belt, return the belt loops to their place.

Also, the question of how to sew jeans in trousers is not of great difficulty. For example, if you have flared jeans, and you have a passion for skinny jeans! Of course, if you have rapper jeans, take them in or don't take them in - the panties will not work. The rest can be dealt with.

Before narrowing the jeans at home, we put them on, stand in front of the mirror (it is better to stock up on an assistant). With tailor's pins, we carefully pin those places that we would like to remove. This must be done on the front side. It is enough, however, to stab only one leg, and measure the second on it, otherwise there is a great risk of getting different widths.

After pinning, carefully remove the jeans, turn them inside out, mark the places of pinning from the wrong side with tailor's chalk. We remove the pins, draw the line of the future seam along the lines, it should be as even as possible. Next, we combine both legs, along the drawn line we pierce all layers of fabric through and through, draw a cut line on the second leg.

We cut off the excess, sweep the seams, sew on a typewriter, process the edges with a zigzag or overlock. turn out, try on. In general, it is very useful to try on the product several times in the process.

Now you know how to sew jeans at home. Dare!

Instruction

Denim shrinks when washed in hot water. Pour boiling water into a deep basin and lower it for 10-15 minutes, do not add the powder, otherwise the color of the material will fade. Bye jeans soak in boiling water, prepare a container with cold water. Quickly remove from boiling water and place in cold water for a few minutes. Then wring out the item and dry it. Usually the material wrinkles a lot, and to iron denim without much effort, turn on the "steam" function on the iron. You can try on jeans and evaluate the result, the main thing is not to overdo it, otherwise you simply won’t be able to put on the thing.

When you need to greatly reduce, for example, after losing weight, then hot water obviously will not help. Decide on the right size and make a mark on the inside of the jeans. Do not rip the factory seams yet - this can be done a little later. Sew the marked places on the sewing machine, it is better to make a double seam, then unravel the factory seams. Overlog the edges of the material so that they do not fluff. Wash your pants in warm water and you're good to go. With this method, you can not only sew in pants, but also correct problem areas by hemming only in a certain place.

If you are completely unfamiliar with sewing, and you are afraid to wash them in hot water, contact any sewing shop. You will be reduced to the required size, moreover, the work will be done efficiently and professionally. It is very difficult to achieve a similar result, because the denim is dense and it is difficult to sew it on a typewriter without skills. But if you are “you” with a sewing machine, everything should work out for you without the help of professionals.

Helpful advice

Do not rush to reduce jeans in size, especially if you have recently bought them. Over time, they can shrink without the use of additional methods.

But even high quality jeans tend to stretch after being worn. Men are advised to buy jeans in their own size, but for long wear women need to choose them 1-2 sizes smaller. But do not overdo it: too narrow jeans create pressure on the internal organs, which slows down the blood circulation process and can subsequently lead to various diseases.

Instruction

Therefore, choose, first of all, and if they stretch and you don’t want to part with them, follow a number of tips:
Wash jeans in the washing machine and then tumble dry. Normal jeans will surely shrink. If there is no hot drying, then after washing, rinse them with cold water and, without twisting or squeezing, hang them upright. Main motto: frequent washing is the key to a good look;

Spread jeans along the side seams (if you have a skill, and if not, then it’s better to contact), mark the width you want to get on the wrong side, then sweep with threads. After trying on, if the width suits you, cut off all the excess and carefully stitch;

Don't wear alone jeans too often: to prevent natural stretching, purchase several pairs of jeans. Alternately changing one jeans on others, you will allow them to keep their “factory” look for a long time.
After washing when jeans slightly shriveled, do not iron them when wet. slightly damp jeans after ironing, they will stretch again and the effect of washing will not work.

How to sew pants down a size

Many women's things gather dust in the closet because of the likelihood of their owner's rapid weight loss. Often clothes become large, but they like it so much that you want to alter it and continue to wear it. Before you make your jeans a size smaller, try them on and see if they are big everywhere. It happens that the pants are too big in the waist, but still sit tight in the hips. If the trousers everywhere have become larger in size, then you can get to work:

Before sewing in jeans, make sure you have a sewing machine in your arsenal and know how to use it.
When trying on, pin the excess fabric with pins, remove carefully.
Lightly go over the pin marks with chalk, moving away a little from the measurements.
Spread the seams on one leg and, cutting off the excess, sweep the edges.
Do the same with the second leg.
Sew the hand seams with a sewing machine. If there was a double stitch in the original, duplicate it.
In the hip area, the actions will be the same, but before sewing, you will need to cut off the belt. At the final stage, shorten it and sew it back.

How to sew trousers at the waist

There are many styles of jeans. They are worn from very narrowed models, designed for very slender people, to straight wide ones. To answer the question of how to properly sew in jeans, in addition to the style, you also need to determine the purpose for which the size is adjusted. Let's say your pants have a straight cut of medium width, and they are too big at the waist. To remake these jeans for yourself, follow this algorithm:

Step back from the middle seam at the back by 7 cm in both directions and at this distance unfasten the belt.
Next, you need to space the crotch by about 8 cm.
Open the middle seam too.
Poke pins from the wrong side, showing the places of sewing.
Sew along the marked lines, duplicating the double stitch if necessary.
Cut off the excess length on the belt and sew it on.

How to narrow down jeans at home

When buying flared denim trousers, be prepared that in a short time the once fashionable item of clothing will be completely out of demand. This model is not suitable for everyone and is often bought only for the sake of current trends. And this applies not only to women, but also to the representatives of the stronger sex. So that the thing does not disappear, you can give it a second life. How to narrow men's jeans and transform a woman's trousers is easy to understand from the description:

Before you take in your jeans, take a look at your figure and think about whether pants that are very narrow at the bottom will suit you. Ingoda it is better to limit yourself to a moderate width of the trousers.
Turn the jeans inside out, draw a new sewing line parallel to the original seam with chalk. Pin up the pins and try on. The thing should not only sit beautifully, but also be comfortable. If necessary, adjust the bottom length before narrowing.
Stitch the seams, gradually removing the pins. Trim off unwanted fabric.

Due to the peculiarities of the female figure, jeans often fit the hips perfectly, but at the same time they turn out to be too loose at the waist. This not so serious problem can noticeably spoil the overall harmonious image. Therefore, many customers are faced with the question of how to properly sew in jeans immediately after buying them.

The second common situation when you have to sew in denim pants is related to weight loss. Along with a few lost kilograms, the volume in the waist and hips is also lost. In this case, it is necessary to suture not only in the belt, but also in the hips. You can adjust the jeans a little on your own. There is nothing complicated here, but you need to master certain skills.

How to sew jeans in the waist

First of all, you need to carefully rip off the belt, three back loops and the company label located on the back of the jeans. After that, we open each side seam, starting from the upper end of the front pocket and to the top edge. After removing the remnants of the thread, carefully smooth the seams. Now we draw the lines along which the new seam will pass. We use chalk or a thin remnant for this.

Stepping back 1 cm from the intended lines, cut off the excess fabric. We turn the jeans inside out, combine the edges of the cuts and sew with a seam. Here we can interfere with metal rivets that strengthen the upper edge of the pockets. In this case, we finish the line, not reaching about 1 cm to the rivet. Then we sew this section manually. We process both side seams in this way. Jeans are already at the waist, but a maximum of 4 centimeters.

If this is not enough for us, in addition to reducing the volume on the sides, we can make additional triangular tucks along the waistline. Darts must be done strictly symmetrically. There may be 2 or more. We sew each one 2 times. Particular attention should be paid to work in the area of the buttocks, since such tucks can noticeably tighten them. Also pay attention to rivets, embroideries and appliqués. Darts should be placed in such a way that they do not disturb the model composition.

After sewing on the jeans, you need to attach a belt to the trousers. We note which part should be cut off. The incision site can be quite well disguised with a back loop or branded label. Make sure that the center loop is exactly in the middle, and the back side loops are perfectly symmetrical. We sew the company label by hand, using the places of old punctures. In this way, we restore the machine seam and make our intervention as invisible as possible.

Sewing jeans at the hips and below

Sometimes jeans, on the contrary, fit perfectly at the waist, but are too wide at the hips. In this case, we need to sew them in the hip area. You can do this using the tuck technology described above. Only the tucks will not be placed at the waist, but along the hip line.

It also happens that the hips and waist are more curvaceous in comparison with other parts of the body. Jeans can be very tight at the top but too loose at the bottom. In such a situation, we need to sew in trousers at the legs. To do this, you must first rip the jeans along the inner seam, and then mark according to your measurements, cut off the excess and stitch.

An important point: beware of ripping jeans in the crotch area. Then in this place it will be very difficult to properly assemble and sew everything together.

The same technology can be used to change the style of jeans. For example, sew in flared jeans that are too wide in your opinion. However, if you are not confident in your abilities, it is better to entrust such work to a specialist. Modern models of denim trousers often have many rather complex seams and various decorative details. Therefore, they can be accidentally damaged during flashing, and sometimes irrevocably ruined.

Video: how to sew jeans on your own.

Video: how to sew jeans in the hips.