How to make a paper clapperboard with your own hands. Step-by-step instructions, origami scheme with confetti, from A4 sheet, notebook, bottle and ball. How to make a clapperboard out of paper

New Year is impossible to imagine without bright colorful fireworks, sparklers and loud colored firecrackers. All this is now presented in stores in a wide range for different tastes and colors.

Some people on the eve of the New Year holidays are afraid to purchase various pyrotechnics. There is a way out: we remember the lessons of the past and create decorations for the holiday at home. Of course, it is not safe to “invent” fireworks, but cutting a firecracker with your own hands will not be difficult, even for those who have never done this before.

This type of activity is best done together with other family members, especially with young children. This is not only a great way to spend time together and decorate your home with original decorations, but also, at least for a while, tear your beloved child away from sitting at the computer.

What New Year's holiday and carnival without New Year's firecrackers. Even in the well-known song, "New Year's toys, candles and crackers ..." are sung. You can make some cute crackers in the form of sweets with your own hands and decorate the festive table with them.

To make these crackers, you can use empty cardboard tubes left over from cling film, foil, or kitchen towels, as well as gift paper, ribbons, and any unused cardboard. Place a small toy or candy in each cracker. In principle, it is possible to prepare a separate surprise for each guest, knowing about his hobbies and preferences. For example, if Uncle Styopa collects car models, buy him one that he does not have. And you can give beads for a doll to your niece Masha.

Without spending a lot of time making these Christmas decorations for your home, you can prepare a very beautiful surprise for your guests.

You will need (for one cracker):

cardboard tube from cling film, foil or kitchen towels;
gel pen;
ruler;
stationery knife;
thin wrapping or crepe paper (cut into strips 20x30 cm);
glue gun (low temperature);
light cardboard, cut into strips 4x19 cm;
2 cable binders;
scissors;
1 or 2 toys or Christmas decorations;
wish on a piece of paper;
ribbon;
Christmas tree tinsel.

Manufacturing process:

At a distance of 9 cm from each edge, mark and draw lines around the cardboard tube. Use a utility knife to cut the tube into three pieces, drawing along the drawn lines. The middle piece should be about 10-12 cm long. This will be the body of the cracker. The remaining two parts (9 cm each) will serve to shape the clapperboard, and then they just need to be removed.

Lay a strip (20 x 30 cm) of wrapping or crepe paper face down. Lay the three pieces of cardboard tube on top in the very center in the same order as you cut them. Drop a drop of glue at the base of the strip of paper, in the center. Carefully wrap the tube in paper so that the central part (body) of the cracker runs exactly in the center of the paper and along the glue. Align the other two parts as well.

Leave some paper unfolded. Apply a strip of glue along this section of paper and wrap it all the way until the paper sticks to the tube.

Carefully remove the two pieces of cardboard tube from the cracker. Then roll a 4x19 cm strip of cardboard into a ball until it is smaller in diameter than the hole in the cracker. Insert the cracker into the hole until it unfolds and its edges are flush with the edges of the cracker. You can fix it with glue.

Gently squeeze the cracker to find the center between the body of the cracker and the end of the cracker. With your thumb and forefinger, gently squeeze the paper in this place until you get such a “neck”.

Tighten the binder cable around this neck. Make sure it is tightened exactly around the edge of the cracker's body. After tightening the binder cable as tight as possible, cut off the excess.

Now you can start filling the cracker with trinkets. Place inside a Christmas decoration, tinsel, a wish, a joke, or whatever you want.

Just as you did with one end, seal the other end of the cracker as well.

Wrap fluffy Christmas tree tinsel (approximately 7-8 cm long) or ribbon around each “neck” of the cracker, gluing the ends with glue from a glue gun. Make sure that the tinsel covers the binder cable well so that it is not visible.

Position your flapper seam side down. If you want to add a decoration, just put a dab of glue on the back of it and attach the crackers wherever you want.

Of course, a traditional cracker should make a loud popping sound when you pull the string (that's why it's a cracker). But for this, you will need to place a special wick inside the cracker before gluing it. And that's a completely different story...

DIY candy popper with confetti

Now it has become easy and simple to make a holiday at home, or prepare for any other holiday.

Confetti is a multi-colored miracle that creates the effect of a holiday, cheerful and good mood. Children can also be involved in making confetti. For them, this process will be fun and exciting. Such crackers can also be used at holidays in kindergartens.

Necessary tools and materials for making crackers:

Corrugated paper in different colors to create packaging and confetti;
Toilet paper core to further fill this cylindrical cavity with confetti. Or you can use any other cylindrical object, which can then be easily cut in half. You can also make a cylinder out of cardboard;
Colored paper for creating confetti;
Ribbon, braid for tying candy packaging around the edges;
Scissors;
Glue if needed. You can do without it;
Double sided tape;
Cardboard, or a narrow strip of cardboard.

How to make your own confetti popper:

First you need to make the confetti itself. To do this, take corrugated or colored paper of different colors. Bend it into several layers. From the bottom, cut into strips 5 cm from the bottom edge up, vertically, see the photo below.

Next, in the horizontal direction, cut the resulting strips into squares. You can also use a hole puncher to make circle confetti. Or use a patterned hole puncher in the form of flowers, stars, and the like. Or use everything mixed up to create more spectacular confetti.

Next, we create our confetti shape. We take a sleeve, a core from toilet paper, or a pre-prepared cardboard cylinder. Cut it straight down the center.

You should get two halves as in the photo below.

Then we take such a piece of corrugated paper with which it will be possible to wrap the cardboard blank. Then, approximately closer to the center, glue a strip of cardboard and glue double-sided tape in the center of this strip in order to fix the sleeve there later. At the edges of the cardboard strip can be cut immediately.

Next, wrap the sleeve with corrugated paper. You can glue the edges if necessary. Twist one edge of the future candy.

Fill the cavity of the future candy with confetti. Everything you have prepared before.

Tie ribbons along the edges, like on candy. You can add something of your own.

Your confetti popper is ready. Now, breaking it in half, your confetti will scatter all over the room, street and anything else, creating the effect of a festive mood.

Step-by-step master class (paper clapperboard)

To understand how to make a paper cracker, we need a master class in which the process of creating a cracker is described in stages. So, let's begin. Take any sheet of paper, the main thing is that it be A4 format. Fold it in half diagonally.

Bend all the corners to the center of the sheet, namely, to the fold line.

Fold the sheet in half so that your corners are inside.

You will get a trapezoid, which you need to fold in half, and then unfold to its original state.

We have a fold line, now we need to bend the corners to it so that they touch in the center, but do not overlap each other.

Unfold the corners again, and then fold the workpiece along the line that was the main one when folding. Fold the corners along the fold lines that are already outlined, you should get a triangle. Everything, the cracker is ready. Now show your child how to make sound out of this toy. To do this, take the clapperboard by the sharp end and shake it sharply, your baby will definitely be delighted.

The second option is double

In addition to the usual paper crackers, you can make a double one. It is done almost the same as, and simple.

Take an A4 sheet and fold all the corners towards the center, as in the previous version.

Fold the sheet in half and then in half again. You should have a curve in the middle.

Now you need to put each wing of the figure inside, folding it in half.

We get a hand-made cracker. She claps in the same way as a simple one. Here is the diagram:

In addition, you can also make a triple cracker, at the end of the article you can watch a video on how to make such a toy. And also there will be information on how to make a very loud sound from its explosion.

A simple paper clapperboard (video)

Double (video)

Triple (video)

Very loud (video)

For the holidays (video)

You can make many different models for the game and the holiday, you just have to apply patience and imagination. Yes, and on the World Wide Web you can find a lot of options for creating such toys. Your child will be in the center of attention among peers thanks to the cracker, and you will not be deprived of attention from your friends and acquaintances if you bring cool things made by yourself to the holiday.

A paper airplane, a crane and a cracker - all of them will be very popular with both children and adults. The figures, at first glance, are quite simple, but as it comes down to it, not everyone can put them together. So that you never experience difficulties with this again, we will give you step-by-step instructions with the necessary diagrams.

We told you earlier. From the same article, you will learn how to properly make an airplane, a cracker and a crane using the origami technique. The first figure seems quite primitive, but you will be surprised that only three out of ten people can actually make it. Our step-by-step master classes will help you practice and will be understandable even for children.

paper airplane

Let's start with the simplest - we will learn how to fold a paper airplane so that it does not fall apart and fly well. A step-by-step master class will help you figure this out, we will explain the process in the diagram.

To begin with, we need to take a standard A4 size sheet or a notebook sheet. Let's draw a simple origami diagram, you can do it mentally. If you are teaching a kindergartener or elementary school student, it is best to draw the lines with a pencil.

First, draw a vertical line - divide the sheet in half. Then we draw diagonals from the right and left corners.

Bend the triangle along this line. We should have a small tongue. We direct it up so that our paper airplane is folded more firmly and does not fall apart in flight.

We outline the fold lines of the wings on the side. Then we spread our wings.

The plane is ready! As you can see, even a child can do this simple origami technique. For greater strength, a paper airplane can be glued with a glue stick from the inside. Color the craft to make it more fun to play with.

Paper clapperboard

Flapper is one of the favorite children's entertainment. They are often piled up at children's parties: for example, they arrange speed contests.

We suggest you learn how to make a paper clapperboard with your own hands quickly and easily. Our step-by-step instructions will help you with this. It is simple and clear, so you can even teach it to a preschooler. True, he still needs help.

We take an A4 sheet or a notebook sheet. We expand it horizontally and make markings (with a pencil or mentally). The first line is a fold in half, the rest are a fold of triangles in each corner. Fold the triangles towards the center. Then we connect the side parts to each other.

We fold the resulting structure exactly in half along the horizontal axis. Then unfold the top so that you get a square. Next, fold the bottom of the resulting square up and inward. Then fold the top layer in the same way.

Fold in half to make a triangle. You need to hold a paper clapperboard by the corner.

As you might have guessed, the clapperboard is activated by a sharp downward movement.

Look carefully at the diagram so as not to confuse anything. It may seem complicated, but in fact everything is elementary. If you did everything right - take care of your ears, because the sound can be very loud. Practice, and soon you will be folding paper crackers even with your eyes closed!

origami crane

In Japan, almost any child can fold cranes. In our country, origami is not so widespread, however, elementary school students are often given such a homework assignment. We suggest you study the step-by-step instructions with which you can easily learn how to make origami cranes with your own hands.

In order to fold this origami, we need a square sheet of paper. Fold it in half. Then in half again. After that, the upper triangle needs to be pulled slightly towards you and straightened into a square.

We turn the resulting design to the other side. Then flip the triangle to the other side. After that, pull it towards you a little and straighten it into a square. In the top layer, you need to bend the two side corners to the center, and then turn them back.

Now these side triangles need to be folded inward along the lines of the intended fold. Fold the top triangle up. Then turn the design on the other side. Repeat the procedure with bending the corners: first fold them, and then unfold them. Next, fold them inward along these lines.

Expand the top layer along the fold lines. Next, fold the side corners to the center. Turn over and repeat the procedure. Fold the bottom left corner in and out.

A little practice and you will learn how to make such origami cranes without prompts. The main thing is to iron the folds well and make them as sharp as possible so that the paper crane turns out to be even.

Simple origami techniques are very useful for children. Working with paper helps to develop fine motor skills of the hands. Step-by-step instructions and origami schemes teach you to think logically - this skill is fixed in a child if he constantly trains and folds airplanes, cranes, crackers and other paper crafts with his own hands. Well, the subsequent work with decorating the figurines develops the imagination. In a word, origami for children is a really useful thing. This is why teachers often give children homework on how to fold various figures.

Use our master classes, learn and have fun!

A hand-made toy not only develops the motor skills of the fingers of a little why, but also teaches the baby independence in decision-making. Did you pay attention to the pride with which the child then admires his creation? Offer him options on how to make a paper clapperboard.

A hand-made toy not only develops the motor skills of the fingers of a little why, but also teaches the baby independence in decision-making

Here, for the first time, a child cannot do without the help of adults. He can already make the following crackers with his own hands.

Would need:

Sheet of paper (newsprint, magazine, notebook);
School line.

What to do:

For the product, you can use both sheets of xerox paper and magazine sheets. Although it is not very convenient to take a large format of a magazine sheet, and the sound of a pop when opening is not clear. Therefore, it is better to stop the choice on a regular sheet of paper. The size of the original sheet may vary.
Determine the length and width of the paper sheet. We fold exactly half the width of the paper. It turns out two equal halves.
From the side of the fold, bend the edges of the sheet inward to make two identical triangles inside.
On the other side of the folded sheet, repeat the same steps. The four inner triangles should be folded parallel to each other.
Now you need to fold the paper so that the triangles are touching at the vertices. Press the joint well with your hands, or iron a little of the fold with a hot iron.
Fold along the first fold line in half again.
To form a triangle, open the upper part of the sheet from right to left. Bend the rectangle in the center in half.
Do the same actions with the other half of the folded sheet.
Collapse the resulting rectangular shape in the center by exactly half.
Carefully iron the triangular cracker along the curved lines with a ruler.
When using, we firmly hold the home-made firecracker by the bottom, direct it slightly obliquely at an angle, throw it down with a sharp movement, while continuing to hold the product in the indicated place. You should get an expressive sound of cotton.

How to make a paper clapperboard (video)

How to make a paper clapperboard from an A4 sheet

It is very easy to make an original masterpiece of toy craftsmanship with your own hands by following this instruction. Involve the child in the lesson, and literally in two minutes a joyful mood and positive laughter are provided. For the product, it is better to take a soft sheet of paper.

How to do:

Fold an A4 paper sheet in half and unfold.
To the center bend the corners on both sides. Fold the sheet in half again. The folded corners should be inside. It turns out a geometric trapezoid.
Fold the paper shape in half again. Fold the inner corners to the fold line so that the sides of the triangles touch exactly along the indicated line.
Expand the workpiece and fold along the line of the previous guideline.

It is very easy to make an original masterpiece of toy craftsmanship with your own hands

Folding the corners along the resulting lines, we form a triangle.

Double and triple paper clapperboard: manufacturing scheme

The variety of this toy is amazing. Having more wings is known to provide the paper with stunning flapping sounds. The most interesting thing is that the more wings the cracker has, the higher the sound. Let's try to make the most powerful cracker.

How to make a double clapperboard

For the manufacture of toys, a double sheet of notebook paper is ideal.

We bend the corners to the center on both sides of the sheet.
Then fold the workpiece in half exactly in the center.
Turn over, fold along the same bend line in the opposite direction. It looks like a hollow in the middle.
Put each wing (connecting corners) inside and fold it in half.
Do the same for the next corners. The resulting figure is the most powerful cracker.

The variety of such a toy is surprising

How to make a triple clapperboard

This is the best handmade gift. Fun, playful and safe.

You will need:

Gift paper 3 by 2 cm;
2 bushings from toilet paper;
The lace is thin or the thread is strong;
Confetti or finely chopped colored pieces of paper;
Bright ribbon;
A piece of cardboard is small;
Scissors, tape and glue.

The most interesting thing is that the more wings the cracker has, the higher the sound

What to do:

Instead of bushings, you can take any cardboard and roll it into a tube. Glue the edges of the tube, wait until the glue grabs. Make two separate bushings.
If there is no gift paper, you can use a multi-colored candy wrapper, it's even more fun. Lubricate the inside of the paper or wrapper well with glue, press it to the edges of the sleeve. Secure by lubricating the other end of the sleeve. Do the same with the other tube.
From cardboard, cut a circle along the diameter of the main cylinder. Make holes in the middle of the circle with a needle, stretch the lace through them. Secure inside one homemade cylinder with tape.
You can do without a cardboard mug. In this case, secure the thread inside the cylinder with tape. Cut the second sleeve in half, insert the halves into the first cylinder so that the cardboard protrudes about 1.4 cm along the edges.
Fill with confetti. As multi-colored petals, finely chopped pieces of candy wrappers are perfect.
Tie a ribbon between the cylinders like a big candy on both sides.

Stuff the remaining paper pieces inside the cracker.

How to make a loud paper clapperboard using origami

It will take a minimum of patience, a maximum of fervor and a great desire to experiment.

What to do:

Fold a rectangular sheet of paper into a house on both sides.
Bend the leaf so that the "houses" touch the tops of the roofs.
Fold it in half again, as if breaking them across.
Now, pockets have formed on both sides of the "houses". Fold one pocket inward, and in half along the folded line. Repeat the movements with the other pocket.
For spectacular pops, you can put homemade confetti in such a cracker. Take paper of a different color, cut into very small pieces, put crackers in each pocket.

It will take a minimum of patience, a maximum of fervor and a great desire to experiment.

Take a paper clapperboard by the edges of the pockets, lift it at a slight angle and lower it sharply down, without letting go of your hands. It turns out colorful cotton with scattered colored confetti.

A clapperboard made of office paper or thin newsprint will not clap very effectively - such paper does not have sufficient density to produce sound.
The use of the product with small children, as well as animals is not recommended. From sudden movements, animals and children can be very frightened.
To make the lesson more interesting, invite the child to decorate the product with paints or colored pencils.

Double paper clapperboard (video)

Few people realize that the cracker is one of the original origami crafts. Any family holiday can be furnished and decorated with your own hands. And you don't have to spend a lot of money on it. A couple of sheets of colored paper is all that is needed for crafts for the best holiday in the family circle.

Hand-made toys always bring joy to children and tenderness to adults. Especially often they are made on the eve of the New Year holidays. A long time ago, people used to decorate the Christmas tree and their house on holidays only with them. You should definitely learn how to make a paper clapperboard. It turns out very loud and looks beautiful. There are many techniques for making such a product, and you will soon learn about some.

Step by step instructions for making paper clapperboards

Here are a few step-by-step master classes that will help you make great toys at home without any extra effort. The process of making these crafts is very simple. In most cases, you will not need anything other than A4 sheets or a regular notebook. For more complex products, you will need scissors, glue or double-sided tape. In general, only your imagination will affect what kind of product you get and how it will look. Making toys is a lot of fun, so don't be surprised if you spend an entire scrapbook on them.

How to make origami

Step-by-step instructions for making crafts using the Japanese method:

For the product, you will need a regular A4 sheet of any color. If you take a white one, then you can decorate it with paints, pencils or felt-tip pens. Then the cracker will be unique.
Fold the sheet in half vertically.
Bend the corners on both sides so that their edges meet in one line.
Bend the workpiece inward.
Bend the product in half again and straighten it back. As a result, you have a fold line.
Fold the edges to this line.
Bend the product in half again and straighten it. You have made oblique fold lines. Fold the sheet over them.
Take the resulting product by the free ends, pointing the inside forward and pull sharply with your hand. With this action, you will hear a loud popping sound.

DIY double clapperboard

Manufacturing process:

A do-it-yourself double paper clapperboard is very easy to assemble. You will need a regular A4 paper sheet.
Bend the corners of the sheet on the left and right so that they touch each other in the middle.
Bend the resulting structure in half twice, first horizontally, and then in the center.
Place the left and right sides of the workpiece inward and bend in half.
Finally, you have learned how to make a double paper clapperboard.
A little advice: it’s better to take not a white, but a notebook sheet. It is less dense, and then it will bend better and clap louder.

Master class on making crackers with sound

Step-by-step instruction:

Take a cardboard tube, such as a paper towel frame.
Cut out a circle from cardboard, the diameter of which will be a few millimeters smaller than the tube.
Glue the circle onto a large square piece of crepe paper.
Pierce a circle in the center, pull a thick thread through it and tie a piece of a match to the tip.
On double-sided tape, glue a piece of corrugated paper to the tube so that a circle of cardboard with a match is inside it. The paper should wrap around the workpiece.
Cut off the excess.
From colored cardboard, cut out such a piece, the length of which will be equal to the length of the tube. Its width should be a centimeter longer than the diameter of the workpiece. Stick it to the tube with double sided tape.
Cut finely colored corrugated paper, which will act as confetti. Pour them into the tube.
From corrugated paper, cut a circle whose diameter is three times the size of the tube.
Stick it with double sided tape. Leave the edges free and cut them into strips. So the toy will look more beautiful.
You already know how to make a paper clapperboard. To activate it, simply pull the thread sharply. It can be reused many times by refilling with confetti and sticking the bottom to the tube.

See what else you can think of for the holiday. You will learn,

New Year's fireworks have died down, confetti crackers have been slammed, but don't be discouraged, I'll tell you and show you how to make the simplest paper cracker. These crackers were once very popular with the boys at school. The folded paper triangle suddenly emitted a loud bang behind the back or over the ear of the gaping student. Do you think those days are over? Not at all. Children always remain children and love to play pranks and have fun. So let's teach them how to make the simplest paper clapperboard in a minute.

How to make a paper clapperboard in 1 minute

The best thing is to make a clapperboard made of thin paper. You can take a newspaper or a spread of a glossy magazine (if there are no newspapers and magazines, take a plain A4 paper sheet or a double notebook sheet). Cut out a 30x50 cm rectangle.