How to make your own paper car. How to make a car out of cardboard? Variants of small and large cars. Advantages of machines from waste material

Many people know that a lot of types of crafts can be made from cardboard. In childhood, for sure, any person with a fantasy and a desire to do something with their own hands did something from such an accessible material. Few people know, however, there are people who have not given up this childhood hobby, and make truly amazing things out of cardboard.

Today we will tell you how to make a car out of cardboard.

Beautiful car

She will surely delight your little one.

So what we need:

• At least two pieces of cardboard boxes;
• colored paper;
• Scissors;
• Compass;
• Colored pencil or felt-tip pen;
• Copper wire;
• Pliers;
• Glue.

Cut off its walls from the boxes and draw circles on them, these will be the wheels for our future car. Then cut them out with scissors.

After attaching the circles to the base of the second box, trace with a pencil the places where the wheels will be located.

With an awl or scissors on the sides, make holes where the center of the wheels will be located.

Cut off pieces of the prepared wire as long as the width of the future machine. This will be the basis for the wheel axles.

Attach the wheels with glue to the pieces of wire threaded into the holes. If you want the wheels of the car to spin eventually, use pliers to clamp the ends of the wire on both sides in the form of eyelets.

Then we'll take care of giving the car a beautiful appearance. To do this, use a pencil to draw and paint windows and doors, then cut them out with scissors. Or they can be cut out of paper - self-adhesive of a suitable color. If you have the time and patience, you can make the doors open.

In the same way, you can create a cardboard trailer for her, it will be more fun. You can attach it again with a piece of wire.

By the way, if inspiration attacks you, you can make a few more trailers, then you get a whole road train.

You will need the following materials for this craft:

• Sheet of cardboard.
• Paint, brush for coloring.
• Glue or stapler.
• Scissors.
• Unnecessary and obsolete old toys to decorate the car.
• Seven round cardboard tubes left over from toilet paper.

You paint paper cardboard pipes in different colors in any way - with a brush or using a piece of cotton wool. Then cut out circles from cardboard, they will serve as cylinders for the car and paint them.

Glue these wheels to the sides of the car using glue or a stapler.

And now we will tell you how to make a car out of cardboard using modern computer technology.

racing car

You will need:

• Paper
• Printer
• Scissors

This type of craft is easy to execute, you just need to print it, carefully cut it out and glue it along the drawn contours. Such blanks can be found as much as you like on the Internet, an example of one of these is shown in the figure below.

How to make a car out of large cardboard?

Glue all parts of the box with tape.

On both sides, draw the doors symmetrically on both sides and cut them out with a sharp knife with a thin blade.

In the same way, draw and cut out the windshield.

Using adhesive tape, fix the bent parts of the ends with a bend inward, now using it, fix the windshield.

If he has extra pieces in the corners, cut them off with a knife or scissors.

Using the bottom of paper cups, make wheels for the future car. If they are not at hand, you can simply use round pieces of cardboard of the desired color and size.

Now color your creation and admire it!

Simple and cute machine

Shape a piece of paper into a square. Who does not know, it is done like this: bend the sheet diagonally and cut off pieces that protrude beyond the edges. Cut off the excess with scissors.

Bend the square into two halves, then two more times along and across. This will show you the fold lines. Now you can expand the sheet.

Wrap its lower ends to the very top of the middle. Then, on both sides, bend the lower parts of the bent corners, you will get wheels out of them.

Everything that turned out in the end, fold in half along the line that is along the central fold. Bend the lower part up and bend the upper right corner.

Draw headlights and other details for the product, paint in any colors. We hope your child enjoys this simple craft.

Girls car

Few parents realize or understand that not only boys, but also girls can play with cars. Below we will tell you how to make a car in order to carry your favorite dolls in it. I think your daughter will love this craft.

So, what you will need to have on hand:

• One cardboard shoe box;
• Thick cardboard;
• Thin paper of different colors;
• Glue;
• Double-sided tape;
• Long wooden sticks in the shape of toothpicks;
• A small piece of clear plastic;
• Anything that looks like headlights.

First, draw a door template on paper that would fit the size of the toy. The usual length of the legs, for example, the Barbie doll, which girls love so much, is eighteen centimeters.

Cut off both sides of the workpiece and bend inward the tips of the resulting template. On these tips we will mount the seats.

Then make cuts with a sharp knife where the car seats will be.

Now cut out even circles from colored and thick cardboard, four of each. These will be the wheels.

Using a needle or an awl, make through holes in the center of these circles and then make more of them.

From thick cardboard, cut out the hood and trunk according to the size of the shoe box.

Glue each prepared part to the car in turn, then make holes for the wheels in the box.

Using colored paper, glue the car, then make the windshield using transparent plastic.

Video lessons

For various exhibitions of crafts and just for playing with children, you can make cars out of cardboard. These can be small table toys, as well as large floor toys, in which the child will fit himself. Children love to help make and color to create a purpose for the craft. It can be an ambulance, a fire department or a character from the cartoon "Cars".

In the article, we will consider how to make a car out of cardboard with your own hands from different materials.

Cardboard cylinder machine

As the materials needed to assemble such a desktop toy, you will need a solid cardboard cylinder left over after using toilet paper. Before you make a small car out of cardboard, in its central part you need to make a rectangular hole with a knife, which is intended for the driver. It is not necessary to cut the paper completely - a backrest for the seat is made from the strip that turned out in the center. The steering wheel can be cut separately from another cardboard.

It remains to attach the wheels. Before you make a car out of cardboard, you need to buy thick sheets of paper from which the wheels will be made. To make them stronger, it is recommended to glue them from several layers. Then the child will be able to put pressure on the toy with his hand, without fear of bending the product.

The wheels are mounted in pairs on bolts or buttons. Details are painted separately, then everything is assembled together.

Cart

Let's look further at how to make a car out of cardboard into which toys can be loaded, and it will play the role of a cart. It is better to make them with corrugated cardboard using small metal rods. You can take them from another broken machine or take them from waste material.

For the main design, you can pick up a ready-made cookie box or assemble it according to a simple scheme for making rectangular boxes.

The wheels are attached to the axle. A wire is wound on the ends of a metal rod in several layers. This serves as a stop for the cardboard circles to keep the wheels from falling off. It can be painted as desired by the child in different colors. A rope is tied in front, and the cart is ready.

How to make a car out of cardboard: diagram

Now on sale there are printed diagrams of different models of cardboard machines. These are well-known and popular cars of foreign and Russian companies. If you have a color printer, you can print them from sites.

Before you make a typewriter out of cardboard, you need to carefully cut it along the contour with scissors, not forgetting the white corners, on which a layer of glue is then smeared.

It is easy to assemble such a model. You just need to carefully iron your finger in the folds of the paper. But it will be just a static toy, the whole interest of the child is in assembling and cutting out the model. You can collect them for the sake of the collection and keep them under glass in the closet.

Garage for cars

If you already have a few homemade cars, then you need to keep them somewhere. It is necessary to build a garage or parking for cars. Before you make a garage for cars out of cardboard, you need to pick up a box of corrugated material of the size we need.

All sides are left, and the top side is cut off completely. The box is turned upside down. Large square holes are cut out on the side for the entry of cars.

If you are making a parking lot, then you need to draw places for cars on its roof and, of course, make a convenient exit for them. Children love to roll cars on slides, so an externally attached strip of cardboard glued to one side of the garage will easily play this role.

You can improve the parking lot by making curbs or garage doors, as well as painting it beautifully. It is interesting to paste over the box with colored paper, or you can paint it with markers or gouache paints.

Big fire truck

For the manufacture of such a specialized machine, you need to pick up a corrugated cardboard box. It should not be too thin and high, because the truck is a package turned on its side. Before you make a car out of cardboard, you need to carefully glue the sides with tape so that the slot is not visible.

Then you need to cut a hole on top so that a firefighter hero can be put into the car. Wheels can be cut out of another box and simply glued on the bottom of the car. If you want to make them spin, then you need to figure out what they will be mounted on. You can use wooden round sticks from flags, for example.

It remains to colorfully paint all sides of the fire truck, embellishing them with small details: stairs, headlights, windshield, white stripes, you can write a phone number to call the fire department. It is often written on such cars.

Don't forget to applique the lights. To do this, use strips of yellow paper folded into cylinders.

Outdoor car for a child

Children are very fond of all sorts of large containers - boxes, barrels, even cabinets where you can hide or just climb in. Therefore, before making a car out of cardboard for the child himself, you need to check whether he will fit there, think about where the baby can stretch his legs to make it comfortable.

One box is not enough, you will need at least two, and preferably three, as in the photo below. The trunk and hood of the car make them two whole boxes, sealing their slots with tape. But over the middle part will have to work hard. If the child does not fit in the center of the car, he has nowhere to put his legs, then you will need to cut off one side of the box from the middle and also the side of the hood adjacent to it. Then the child, sitting in the center of the structure, will be able to stretch his legs into the space of the first box.

The windshield of a convertible is cut out of the sash, making a rectangular hole in it. Wheels and headlights can simply be glued onto the frame.

As you can see, making such interesting crafts with your own hands is not difficult at all, and the joy of the baby will be endless. The main thing is not to be lazy and want to bring joy to the child.

Making crafts brings great fun to children. You can do anything, for example, a voluminous car made of paper. A big plus of working with this material is its safety. That is why the acquaintance of children with creativity begins, as a rule, with paper.

Paperwork can be very interesting and varied. You can make beautiful cars that little racers will definitely like. At the same time, there can be a lot of options for making such crafts.

One of the most popular areas is origami. This technique is suitable for the manufacture of any products, while it is not at all necessary to immediately take on complex models. A paper car can be made in many other ways.

Important! The main thing that parents should consider is the age and abilities of the child.

You should not immediately offer options with many details and demand that the baby do the job perfectly.

You should always start small. So gradually the child will learn to handle paper, glue and other stationery. Making paper crafts develops the child's creative skills, the child becomes more independent and proactive.

Expanded diagram of a paper jeep

Needlework for boys is quite a difficult task, as parents have to choose a suitable topic for a long time. If girls can enjoy making flowers, animals, dolls, etc., then boys will quickly get bored of such work.

But, if you offer the kid to make a beautiful car with his own hands, and maybe a whole fleet of vehicles, he will definitely agree.

Toilet paper racing car

For manufacturing, you will need not the paper itself, but only a sleeve from it.

Needlework masters do not recommend throwing out such cardboard cylinders, as they will be useful for working on various products, including for the most beautiful decor of the walls of the house.

toilet paper car

In addition, you need to stock up on white and black cardboard, colored paper, felt-tip pens, glue and pushpins. You can also use paint.

Diagram of a paper machine model

The cylinder will be the basis of the machine. To do this, it needs to be prepared. If the sleeve is in good condition, it can simply be painted with paint. The cylinder can also be made with your own hands from cardboard, in which case you will have to additionally paste over it with colored paper.

Next, you need to make wheels from black and white cardboard. The circles must be the same size. White discs should be smaller than black ones. Having prepared 4 wheels, you need to carefully glue them onto a cardboard cylinder.

Detailed diagram of Toyota from paper

After that, you can do the front of the car. To do this, cut a triangle that is glued to the end of the sleeve.

Here you can stick 2 circles of yellow paper: this is how the car will have headlights. With a felt-tip pen, draw a radiator grille. At the back, glue 2 red circles that will be brake lights.

DIY paper race cars

To do this, you need to cut a semicircle that will become a windshield, and make a hole in the center of the sleeve where the driver will sit. You can put a small toy man or a Lego figure in the car.

Step-by-step example of creating a car out of paper

On a note! Such cars are prepared very simply, but they turn out interesting and bright.

If desired, you can make several of these cars with your baby, and then arrange races.

Cardboard trailer car

This version of the craft is also considered very simple. Here you need only the most affordable materials and a little time.

The result is an interesting craft with which the baby will be interested to play. It is worth noting that according to this scheme, you can make not only a typewriter, but also a train.

To work, you will need colored paper, corrugated cardboard, which can be taken from any box, scissors, glue, a bolt with nuts and a rope with an awl. According to this set, it should be clear to the parent that the child cannot work on this craft on his own and adult supervision will be needed.

For work you will need colored paper, corrugated cardboard

As for how to make a car out of paper, first you need cardboard. It should draw the body of the car and trailer. 6 identical wheels are also cut out of corrugated cardboard.

At the same time, the child, most likely, cannot do without the help of adults, since it is difficult to cut thick cardboard.

Scheme of the machine in expanded form from paper

After the blanks are completed, you can paste over them with colored paper or paint them with paints. Car windows are cut out of colored paper, headlights and brake lights are made. Do not forget about the trailer: it will have 2 wheels, and given that the craft will be two-sided, both sides of the cardboard should be carefully processed. Moreover, you need to make sure that everything is the same on each side.

Then begins the difficult work of assembling parts. Here, without the help of adults, the child can not do. First you need to make 2 holes with an awl in the bottom of the machine and 1 in the trailer. In the center of each wheel, you also need to make a hole.

Now all the wheels are attached to the body and trailer with bolts and nuts. Here you can let the child work on their own and even provide the appropriate tools for this. It will be not only interesting for the kid, but also useful.

Detailed scheme of UAZ paper

Lastly, the car is connected to the trailer. To do this, you need to make 2 holes with an awl, and then tie the elements with a thread.

3D machine according to the scheme

Such options for crafts are more complex. A child who knows how to handle scissors and glue will cope with the work.

In general, the whole process is to find a paper machine, that is, templates for printing, cut them out and carefully glue them together. But the result will be very interesting. Such cars will be able to occupy the baby for a long time.

A detailed diagram of a paper machine

The easiest way to make a three-dimensional car is to use ready-made drawings. These are the optimal models, where all the parameters are checked, and the kid only has to cut and glue the three-dimensional car.

If the parents have enough artistic skill, plus they have drawing skills, you can create your own model. It will be a unique car, but the principle of its manufacture will remain the same.

Detailed scheme of fiat from paper

To create a three-dimensional machine, ready-made templates for paper cutting machines are printed out, then pasted onto thin cardboard and cut out. If possible, you can immediately print the blank on thick paper or whatman paper.

Detailed paper delorean diagram

On a note! In such models, white corners must be present.

These are valves for gluing parts. After the base is bent along the lines indicated in the diagram, glue should be applied to the white areas. Then everything is carefully glued together. You will have to spend some time, but the result will be a beautiful three-dimensional model.

Origami paper machine

This option is considered the most difficult. Origami is a whole art, to which many devote a lot of time to hone their skills. To become a master in this matter, you need to be patient and have a few sheets of paper. Don't worry if it doesn't work the first time.

Important! Experts in the field of origami art recommend that you first learn how to fold a sheet of paper evenly.

After the hands gain at least a little experience, you can proceed to the implementation of products. At the same time, it is worth noting that the origami machine is considered a rather complicated craft. Therefore, for starters, you can complete simpler elements with your child.

For example, the well-known airplane will be a great exercise for children's fingers. This will give a good start and teach the child to bend and unbend parts correctly. Experts assure that the final result depends on how even the fold is. If you make a mistake in one place, then the whole product will come out crooked.

The origami technique is considered quite complicated, so parents should not leave the child alone with this work. Although scissors and even glue are not useful here, the baby will definitely need the help of adults. For example, he will need to explain the sequence of the circuit. After the child makes the machine once with adults, he will be able to repeat it on his own.

To make an origami car, you only need one sheet of paper. If it is A4 format, you need to take scissors to turn the sheet into a square.

Paper race car

The first step is to fold the sheet in half, and then in half again. Next, unfold the paper. It will be seen from the folds that the middle is marked here and each side is divided into 2 equal parts.

Now you need to take the bottom edge and fold it in half, that is, bring it to the center of the sheet. The corners from the center point are bent down. They will become the wheels of the vehicle in the future.

Variant of origami from banknotes

The upper part of the sheet is bent forward to the middle. After that, more than half of it is bent in the opposite direction. Continuing to work with the same part, bend a part of the sheet diagonally from the center. Now the workpiece can be turned over. It will already look like a typewriter. Here you can see the wheels and there is a body, which turned out in the hatchback version. At this stage, you can paint the car, draw windows, headlights, etc.

In the origami technique, more complex products can also be made. But for novice masters, and especially in childhood, such a car would be the most suitable option to try your hand. Having trained your hand, you can move on to more labor-intensive crafts, including trucks.

A car for a boy is something special, as a rule, since childhood it is the most favorite toy. And when the child is already tired of all the models and he asks for a new one, the art of origami comes to the rescue. The origami car is perhaps the most popular product that real men choose. If you do not know how a paper machine is made, the diagram will help you and explain all the incomprehensible points.

Such a do-it-yourself car is a toy that does not require costs, but the pleasure of playing with it is certainly no less than that of expensive plastic products.

Preparing to make crafts

In fact, to make such a product, very few materials are required. It is enough to stock up on a sheet of paper of any size and color. For the game, for example, you can create different cars by distributing teams according to the colors of the races. The finished model does not require the use of scissors and is a one-piece design. The only thing is, if there was no colored paper at hand, you can use pencils and paint the model as you wish.

Assembling an origami racing car

Of course, there are plenty of cars for every taste, but what boy doesn't dream of owning his own racing car? How to assemble a racing car can be found in the scheme.

But, of course, for beginners it is better to view the phased production of a car. Step-by-step instruction

1) Take a regular sheet of paper (in this case plain white).

2) For this machine, you only need half a sheet, so you should carefully fold it in half and tear it.

3) On both sides, it is necessary to bend the corners of the sheet to get the following blank:

4) The side triangles are folded in half and on one side and the other.

5) The sides also need to be folded towards the center. And the closer to the center, the better.

7) The workpiece is folded in half by inserting guides into the openings from the opposite side. And in principle, we are already getting an almost finished model.

8) Well, since we still have to get a racing car, the wing is bent.

9) And it remains only to decorate the car in the desired color, for example, like this:

For beginners, such a model will be quite enough, but those striving for excellence in making origami cars should additionally watch a video on how to make an origami car out of paper.

By the way, such a craft can become both a toy for a child and a wonderful gift for a men's holiday. Auto can deliver wishes to the addressee directly on itself. A little imagination and patience - and now the paper masterpiece will not keep you waiting. Such a product will become not just a toy or a simple craft, but will also amaze the imagination of others with its versatility.

Video tutorials for beginners

There are many different ways to entertain yourself. One of these options is origami. Such an activity will interest not only children, but also adults, and will also allow you to spend a joint vacation with benefit. In this article, we will consider unusual and simple ways to create paper cars at no extra cost and using improvised means.

origami technique

Origami is a fairly ancient technique, originating in China. Primarily, the technique was used in rituals of a religious orientation, later it became available to the upper strata of society. Over time, the technique spread and found a huge number of fans.

Today, not only adults, but also children of all ages are engaged in origami, while there are a huge number of various patterns and patterns of paper cars.

The technique has several varieties:

• modular - the most popular and widespread system, characterized by the creation of several blocks and three-dimensional figures;
• simple - created specifically for beginners or people with disabilities;
• wet folding - carried out by using water to give the lines smoothness and expressiveness.

Origami is a technique for creating models and figures of various subjects from paper. This method helps to develop logic and spatial thinking. In addition, the creative side of the personality develops due to the active work of thought processes.

Varieties of paper machines

There are a considerable number of options for creating beautiful paper cars. Let's consider the most common of them.

Assembly according to instructions. There are special instructions on how to make a typewriter out of paper, which can be easily found on the Internet. In order to make such a machine, you will need to download the diagram, print it on a printer, then cut it out and glue it.

Sports variant

To create, you need a sheet of rectangular paper. It is important that its sides have a ratio of 1:7. The upper right corner is folded first, and the lower left in a similar way. After fixing, the corners are returned back. As a result, we get outlines.

After that, it is necessary to bend the upper element, while tucking it inward. Next, again bend the triangles to the central part of the sheet. The side parts of the sheet are bent, and the lower part is folded.

At the final stage, the figure is folded in half, and protruding pieces of paper are carefully tucked into the resulting pockets. If desired, the car can be decorated.

Easy option

A square sheet of paper is folded in half from bottom to top, then unfolded. Similarly, it should be rolled up from the perpendicular side. As a result, a basting should be obtained and the central element should be determined, as shown in the photo of paper machines. The bottom quarter is folded up, and the corners are folded over.

The part located on top is bent down, while obscuring the lower part. The upper right corner must be bent, thereby we will get a windshield. At the end, it is recommended to expand the figure.

Racing car

You will need a sheet that needs to be bent in half along the long side. Connect the corner to the opposite side. Do the same for all corners. This will result in two squares with intersecting lines. Triangles related to the long side are bent to the inside.

The triangle, located on the other side, is tucked into the folds formed on the hood. It remains only to bend the fragment that will be a spoiler.

Fire engine

When creating such a model, paper alone will not be enough, so glue and scissors should be prepared in advance. To create, you will need a special blank made of dense material.

In addition to the main elements of transport, additional details should be transferred. After that, the blanks are cut out and neatly glued together. If necessary, additional elements can be glued with PVA glue.

Hand tools car

An equally exciting activity can be the creation of a machine not only from paper, but also from improvised means. To create, you can take several figures from cylindrical cardboard, pasting them with pre-colored paper.

After that, a small rectangle is cut out and slightly bent. It will be a car seat. Plastic bottle caps can be used as wheels. In the end, it remains only to decorate the machine.

In conclusion, it should be noted that creating paper models is a very exciting and useful activity, the main thing is to follow the step-by-step instructions on how to make a car with your own hands. The video shows a master class on paper typewriters.

Photo of paper cars