How to reduce the strap on a watch: remove the links from the metal bracelet of the watch. How to remove links from a watch strap

~~Lovely girls, nice to see you here! Thank you for giving me some time!~

Still in doubt whether to buy such a watch or not?

Hope my review helps you buy!

A couple of my other Sunlight favorites:

~~~~~~~~~~~~~~~~~~~~~~~~~~ Now let's get started!~~~~~~~~~~~~~~~~~~~~~~~~~~

I have a large collection of watches and, as you can see, I love them.
This time my choice was the watch. SUNLIGHT BRILLIANT Samantha Messi

The bracelet, dial and hands are all in rose gold.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The strap is too big, so you'll have to lower it anyway.
You can do this at any jewelry store for a small fee. If this is not possible, you can shorten the bracelet yourself by removing the links.

Especially for you, I leave instructions on how to do this:

There are special holes in the lock of the metal bracelet so that you can change the length of the strap as you wish. Using an awl (and preferably a needle), press down the pin (sleeve) on the lock. The spring that is in the pin will push it out so you can take it out and fix it in another hole, thus reducing the length of the bracelet.
If the bracelet is still too big for your hand, carefully examine its links near the lock. Usually a few links differ on the inside from the rest. These are service (control) links that can be removed in order to adjust the length of the bracelet.
When working with a bracelet, pay attention to the fact that there are arrows on the control links. Take an awl or needle and, according to the direction of the arrow, pull out the pin that holds them together. If the pin is difficult to give, take the pliers and carefully pick it up by the corner. Remove the extra link.
Connect the links of the bracelet by inserting the pin back. Try on the bracelet. If it's still not short enough, take out a few more links.
If you have a solid metal bracelet on hours, then the operation to reduce it will be much easier. In order for such strap has become shorter, it is enough just to squeeze out a pin in each link, and then connect the bracelet. However, this will require a very strong needle or even a watch screwdriver.
Perform all work with the utmost care, as scratches from careless handling may remain on the bracelet.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~

The price of the watch did not exceed 1490 rubles

~~~~~~~~~~~~~~~~~~~~~~~~ BUY? OR NOT?~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

At the beginning, I was also worried and thought that the quality would be so-so, and the money wasted, however, in the store they sincerely assured me that this was jewelry steel and that nothing would happen to it.

Nevertheless, after 2 months, on the watch in some places the steel began to change color from gold to silver. If you do not look closely, this silvery hue is almost invisible.

Sellers, I ask you: Why did you lie to me so brazenly about super-quality jewelry steel?

I can say one thing for sure: the watch does not darken, as it happens with ordinary low-quality jewelry, and does not leave dark marks on the skin at all - this pleases me and that is why I dare to recommend it to you. And whether the mechanism will withstand the years, time will tell, I hope that survive.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Mechanism Japanese

Guarantee for the mechanism 6 months

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

As soon as there is news, I will immediately update the review! Thank you all for your attention!

_________________________

Half a year later, I decided to update my review BUT, I still recommend this watch! Indeed, over time, the golden color gradually began to turn into silver more and more in large and large places, however, the clock SO THAT HAVE NOT BEEN DARKENED OR CLEARED TO BLACK! Those places where the steel changed color from gold to silver are not noticeable at all. Unless, of course, you will not closely examine the watch especially close ...

No matter how hard I tried, I was in no way able to capture the silver areas (in the photo, almost like in life, they are not noticeable at all).

Any metal watch bracelets are designed for the widest wrist size. Therefore, most are faced with the problem of how to shorten a metal bracelet on a watch. The easiest way is to give the product to the workshop, where a couple of links will be quickly removed for a small price. However, if you do not have the desire to go anywhere, then you can do this work yourself.

Removing a couple of links from the strap is not so difficult, so anyone can do it. The whole job will take no more than half an hour. Most manufacturers initially create the possibility of shortening their products and even attach instructions. However, not always. This feature is inherent in firms of expensive brands. In total, there are two types of metal bracelets: rod and plate. It is about them that we will talk.

The working process

Let's analyze a detailed example on a Casio product. However, before disassembling the Casio watch bracelet, you need to prepare the tools for work. There are only four of them:

thin awl or narrow rod;
tweezers;
pliers;
nut (or other product with a cavity inside).

If you have a set of tools - very good. It will be easier for you to work with special devices.
New watches usually have a film stuck on, so be sure to remove it before disassembling. It can be left on the screen to avoid scratches that may appear during operation. The whole process should be carried out in a clean workplace, preferably on a sheet of white paper. This will help you keep all the little details.

The strap is made of separate parts fastened together with studs. Therefore, to shorten it, you will need to pull out the studs and remove a few links. Put on your watch and see approximately how many links you have to remove. It is better to remove less than more.

It should be noted that the size and shape of the fragments differ from each other. Most often, the first two links on each side of the dial are similar to each other, but differ from the rest. It is after these fragments that it is worth starting to remove the extra ones.

The easiest way to shorten a Casio watch bracelet is to follow the instructions provided. On many watches of this company, arrows are affixed on the inside. They indicate in which direction it is necessary to extrude the pin. Thus, having selected the links to be removed, find a narrow hole on the side, put a nut on the back side, and use a thin awl to press on the rod. If you can’t press, you can lightly tap the awl handle with a hammer.

When the rod peeks out a sufficient distance to grip, clamp it with pliers and pull it out to the end. It is necessary to repeat the action with the second pin for the same link. This concludes the first part of how to shorten the metal bracelet on the watch.

Now it is important not to make a mistake with the number of fragments to be removed. To do this, after removing each link, attach the watch bracelet to your hand and connect the ends. Work must be continued until the watch moves only slightly on the hand. This is required so that the strap does not squeeze your hand. It is also important to shorten the length on both sides, otherwise the latch will be displaced and cause inconvenience.

The number of fragments removed may be odd, since the width of your wrist can fit any width of the bracelet.

This completes the process of how to shorten the bracelet on the watch. Now you need to put all the details together. Hours are easier to assemble. It is necessary to put the holes at the same level and insert a hairpin into them.
To prevent the rod from falling out, make sure it is fully inserted. With light taps, bring the edge of the rod to the edge of the bracelet. After assembling the clock, the work is finished. The rest of the details are best kept. For convenience, you can collect the removed links together.

This is the easiest way to make your watch bracelet smaller at home. It is suitable not only for Casio products. This structure of the metal strap is inherent in most modern watches.

If you managed to find a good watch for yourself, then it is important to ensure that they fit perfectly on your hand. Sometimes it is necessary to slightly reduce the bracelet so that the accessory holds better.

Let's learn how to remove the link on the watch bracelet. We will make it convenient for you.

We measure the required length

If you decide to shorten the bracelet, it is important to know by how much. This is found out by a number of simple operations.

Put the watch on your wrist. When they are placed correctly, turn your hand, pointing the clasp up.
Gather the links together so that the arm is wrapped tightly.
See what you got. Extra segments that dangle or hang down will need to be removed.
If you cannot determine at a glance how many links to remove, then remove one less than you want. Subtracting is simply easier than adding.
It is better to shoot an even number of links. If you remove one from each side, the clasp will still be in the center.

Now prepare the tools: hammer, screwdriver, awl and pliers.

Removing links

First you need to separate the bracelet from the watch. This is done by removing the rod from the fastener. It is easy to remove it - just use the usual thin awl. Just press gently and do not overdo it with extra effort so that the small part does not fly off somewhere far away.

For this reason, the workplace must be ideally prepared. Cover it with paper to prevent small items from getting lost.

Now select the segment to be deleted. Again, it is time to act with an awl - it is much easier for them to squeeze out the rod. Take a closer look at the link - in its lower part there should be arrows indicating the direction. The ideal way out in such a situation would be to press with an awl, and further extraction will occur with the help of pliers. Do not scatter the parts, but collect them in a matchbox or put them somewhere else.

When the first rod is removed, it will be time to remove the second one. When you have completed the process, pick up the small tips that hold the axle. In the next step, remove the second link.

Collecting back

When the extra links are removed, restoration of the fasteners will be required. Don't forget the arrows. Studs are stuck in the opposite direction. The rods can be hammered with gentle hammer blows. When they are in place, you will need to secure them with tips.

Then bring the clasp to the dial and connect them. Now the watch should sit comfortably. This can be corrected by inserting the rods into the spare holes. It is better to clean up extra hairpins - they may be useful in the future.

You can also remove the links with a screwdriver if they were fixed with miniature screws. The main thing in this case is not to overdo it, otherwise you will have to insert the links again.

The most reliable way is to contact a watch workshop, where your bracelet will be shortened in 5 minutes and for a price of no more than 150 rubles.

But for people whose hands are trying to grow from the right place - this article is written.

So, new ones came to our table wrist led watch (they are more commonly referred to as both binary and LED clocks) Zero Kelvin . They have a metal bracelet with standard adjustment. We will tryshorten the bracelet of this watchinto several segments so that they fit the wrist measuring 17cm.

Firstly, if the watch is new, do not forget to take it off bracelet a protective film (you can temporarily leave the film on the screen and case - it will protect them from accidental contact with the tool).

To shorten the bracelet on our watch, we will need the following tools: an awl, a nut (or a sleeve or other object with a cavity), and pliers. All work is recommended to be carried out on a comfortable table, laying a sheet of paper.

So, the watch bracelet consists of fragments (links) connected by pins. To shorten the bracelet, you need to remove a few fragments from it. To do this, select the fragment that we will remove. Please note that not all bracelet details are the same.! The first and second segments differ from the rest in shape and we leave them in their places.

We remove the third segment of the bracelet.

Please note that on the inside of the bracelet, the arrow shows the direction in which you need to remove the fasteners. We put our sleeve under the hole. You can put any rigid object with a cavity. We insert the awl into the hole to squeeze out the pin. You can squeeze it out by lightly tapping on the awl with a hammer.

Be sure to do this in accordance with the arrow on the bracelet. The pin can be easily removed without the use of heavy tools. One has only to force pressure on her and she will move from her position.

After the pin has partially emerged from the hole, it can be removed with pliers.

The first stage has been completed.

Now let's do the same with the second pin of the part to be removed.

We shortened the watch bracelet by one fragment.

How find out how many links shorten the bracelet on the clock?

Here you just need to try. First, shorten your bracelet by a fragment and try on the watch. If this is not enough, then shorten the bracelet by one more, and so on. But remove the fragments of the bracelet evenly, on each side. If you shorten the bracelet by several segments on only one side, then the watch latch will move relative to the bracelet and may cause discomfort to the hand.

We remove one link on the other side of the fastener.

In this example, two links were initially removed, but in the end, for my wrist, I had to remove the third link as well. How many links and how to shorten the bracelet of your watch- depends on the type of your wrist size watch.

After the extra links are removed, we proceed to assemble the bracelet.

It is easier to assemble the bracelet: we insert one link into the groove of the other and fix them with a hairpin. It is inserted with a sharper end, against the direction of the arrow on the bracelet.

To prevent the pin from falling out, lightly tap it with a hammer or pliers to hammer it to the edge of the bracelet. Don't forget to follow the arrow!

All is ready. As a result, we have a watch, spare links and hairpins. The clock must be checked for operability).

We shortened watch bracelet and made them fit under the wrist.

Nothing is ever "superfluous" - so save the disconnected links - they will be spare. For convenience, naturally gather them together.

Please note that according to this scheme, you can shorten the bracelet of most watch models. We hope this article will help you shorten the bracelet on your watch yourself.. But in any case, there are watch workshops that will always help you with this.

P.S. During the reduction of the bracelet on the watch - not a single animal was harmed ...)

Good luck! Appreciate your time...

Casio is one of the leaders in the watchmaking market. The company's products are reliable and durable. Among its products you can find both budget models and unique branded products.

Product Features

Watches of this company are unique products. There are several main features of these structures:

Mechanisms. All company watches Casio equipped with only quartz or electronic systems. If you decide to buy classic mechanical products, then they are not found here. Quartz watch movements are based on designs "Miyota" developed by Citizen. The battery can last no more than 3 years, but there are modifications whose service life exceeds 10 years. More modern varieties of watches are equipped with a special system "Tough Solar" which charges the internal battery from the sun. All spare parts are highly reliable and accurate.
Frame. Budget watch models are equipped with a brass or plastic frame, although this does not affect the design characteristics of the product. There are also products with a metal coating. Expensive designs are already equipped with a titanium case. Sometimes you can find frames made of aluminum and titanium alloys, which gives them originality and strength.
glass for such products, they are obtained on the basis of various natural minerals or plastic (hesalite). Expensive modifications can be equipped with sapphire screens.

Different approaches to different models

The design features of the watch straps of this manufacturer suggest the presence of metal links. The shape and size of such parts may be different, but they are connected according to the same principle. Therefore, the technology of shortening such modifications as Casio AMW 700, Edifice, AQW 100d 1avef, Paw 1100, Protrek, G Shock similar to that described in the previous section.

How to choose the right one?

The length of the watch strap can vary over a very wide range. But for each person, an individual value will be considered comfortable. Therefore, when buying a watch, it is important to pay attention to this accessory, which can be made of both leather and metal links.

You can choose the right bracelet length using a few simple ways:

First measure the diameter of the wrist. The size of the case is subtracted from the obtained value and then the distance is added to the fourth hole on the strap. This approach is considered standard, but not always universal.
The easiest way to find out what size you need- This is to measure the length of the strap from the old watch. This is easy to do with a special meter.
Fitting. If you decide to buy a watch and do not know the exact size of the bracelet, you can simply try it on. In this case, you should not buy products that are too tight on the arm. It is better to give preference to those that have several spare holes for adjustment. Thus, you can independently control the length you need. Please note that experts recommend buying straps that form a gap between it and the hand of about one centimeter.

How to distinguish the original from a fake?

Products Casio is very popular in the world, which leads to the emergence of a large number of fakes. A defective product can be identified by several characteristics:

Marking. The model name and module number must be printed on the surface of the watch and on the packaging. It should be noted that these values are not unique and may be present on many modifications. In this case, this information must be located on the back of the watch. Also using this alphanumeric combination, you can easily find information about a specific model on the official website. All data on the body and box must match.

Package. All watches of this company are sold in the original packaging, which is visually distinguished by good quality indicators. So, for example, a watch model g-shock packed in a round metal jar with a foam lining. Some modifications are equipped with hexagonal containers. If you bought a product in paper or low-quality metal packaging, then there is a high probability of acquiring a fake. All original cans have a special number that is stamped on its inside.

Accompanying documents. All watches are supplemented with instructions, which are translated into several languages. At the same time, in addition to this, an official warranty from the manufacturer or an authorized dealer must be issued for the products. The warranty card must be signed by the seller and the buyer. It must also have a special hologram and a unique number.