Light wall newspapers for the new year. Do-it-yourself wall newspapers for the new year. New Year's posters - New Year's wall newspaper in the preparatory group. These posters can be used
And decorate your house or Christmas tree with them.
You can also use these crafts to decorate gifts, for loved ones, or as a separate gift from children.
Here are just a small part of the crafts that you can do with your own hands from beads and beads.
How to make Christmas toys from beads
You will need:
Thin wire (flower wire can be used)
wire cutters
1. Prepare a long thin wire and start stringing beads of different colors, sizes and shapes on it.
2. Inflate the balloon to the size you need.
3. Start wrapping the balloon with beaded wire. You can leave a lot of wire at the end to make a hook, or you can use all the wire and add thread or ribbon to hang the toy on the Christmas tree.
* You can gradually add beads as you wrap the ball.
4. While wrapping the wire, try to twist it in the same place so that after removing the ball the wire does not spread (which is why we advise you to make a hook).
* Do not wrap the balloon too tightly so that it does not burst.
5. When you have wrapped the entire ball, make a hook from the rest of the wire and cut off the excess.
6. Blow off the balloon and you will have a beautiful New Year's ball of beads.
Christmas decorations from beads: Christmas tree for Christmas tree
You will need:
Wire (dense and thin enough to string beads on it) or a fine brush
Beads and beads of different colors and shapes
Cone (you can do it yourself from cardboard) - optional
1. Prepare a cone and wrap it with wire in a spiral.If you do not want to make a cone, then you can twist the wire with beads into a spiral and then pull one end of the wire (central) to make a Christmas tree.
2. Bend the ends of the wire so that the beads do not fall out.
3. Start stringing beads and / or beads on it.
4. You can add ribbon and thread to hang the ornament on the Christmas tree.
5. Pull on one end of the wire to straighten the tree.
New Year's toys from beads (master class, schemes): mini-wreath
You will need:
thin wire
Beads 3 colors
Pliers (to make it easier to twist the wire)
wire cutters
PVA glue (if necessary)
1. Prepare a thin wire and wrap it around three fingers several times. Twist the ends.
2. Cut three pieces of wire of the same length - in this example, each is 45 cm long. Twist the ends of the wires on one side.
3. On the reverse side, start stringing beads - one color for each wire. The beads should cover each wire by 30 cm.
4. Start weaving a braid of three wires covered with beads.
6. Use wire cutters to get rid of excess wire.
7. Tie a braid to the place where the ends of the wire are attached and tie it so that you can hang a mini wreath.
8. If desired, you can make a bow from a separate braid and glue or sew it to the already attached ribbon.
9. Using PVA glue, you can better fix the braid on the wreath, but this is not necessary.
New Year's schemes from beads: a snowflake from beads (photo)
Christmas beadwork: Christmas tree
You will need:
Beads and beads
Wire
Pliers
wire cutters
* To make a white Christmas tree, use silver-colored wire, and for a green Christmas tree, use copper wire.
* Such a small Christmas tree is woven using the "twisted loops" technique. Everything is quite simple, but this technique requires a lot of free time.
Each loop contains 6 green beads and 2 golden ones. To make it, dial the beads in the following sequence: 3 green, 2 gold and 3 green. After that, twist the wire and repeat until you have collected the required number of blanks.
* From the crown to the base, the branch becomes larger, as well as the number of loops.
* When you have created the required number of branches, start attaching them to the stem in a circle.
How to make a Christmas tree from beads (video)
New Year's beadwork with your own hands: balls of beads and lace
You will need:
Plastic bag
sequins
Tulle or lace (organza or opaque can be an alternative)
1. Take a plastic bag and crumple it up to form a ball.
2. Wind the thread around the crumpled bag. You will get a more or less even ball.
Hi all!
We continue the theme of the new year, if in the last article we already talked with you about. And they made it from all available materials, then at this stage I want to focus on beads. We will make a Christmas tree from these small beads. By the way, they are divided into several more types, such as glass beads and felling. I promise we will not leave this view without attention.
Let's understand what is a bead? First of all, it is of course a decorative ornament. In the center of which there is a small hole. Ideal size for stringing on fishing line and wire. It is these two materials that are the binder. That is, it is simply not possible to make any product without using wire and fishing line. Therefore, before starting work, be sure to check all the material for availability.
By the way, thanks to these decorative beads, you can make not only a Christmas tree, but also Santa Claus and many other toys. And some needlewomen even make jewelry in the form of a necklace, bracelets and even earrings. In a word, beads are very popular among different generations of people. Someone makes toys, and some decorate their walls with them by embroidering pictures.
An equally important point is the quality and manufacturer of such beads. I know two of them - China and the Czech Republic. The second option is very popular among experienced needlewomen and its price is several times higher. If you are just a beginner, then I suggest stopping at the Chinese version. Although it is lower in quality, it is practically not noticeable in finished crafts.
I think we have covered the main aspects. Now is the time to get down to business. We go down below and choose the appropriate one from the presented options.
Christmas tree made of beads - a master class for beginners
Let's start our master class with the simplest option. We will make a Christmas tree from glass beads. By the way, you can replace it with the usual type of beads. And choose your own color. Our forest beauty will be a beautiful white shade. Like under a snow coat.
For the lesson you will need a minimum of material. And maximum efforts, if everything is already prepared, you can get down to business. Sit comfortably, this activity takes a lot of time. But this work lends itself to any beginner.
We will need:
- Bugle white
- Silver wire with a diameter of 0.4 mm.
- floral tape
- Red beads
- Alabaster + water
- shallow bowl
- Scissors
- red wire
Manufacturing technique:
1. Cut off the wire 40-50 cm. We collect 4 glass beads and twist into a loop. Then we retreat 1 cm to the side and again we collect 4 glass beads, we repeat the same process.
For this branch, we need to make 9 loops. Now that everything is done, divide the wire exactly in the middle so that one of the leaves is in the very center. Gently bend and twist the wire parallel to each other. One branch is ready.
2. In a similar way, we need to make the rest of the branches. The only difference between them will be the number of loops. The technique itself is no different.
1 type - 5 loops (the number of finished branches is 4)
Type 2 - 7 loops (number of finished 6 branches)
3rd view - 9 loops (the number of finished branches is 11)
4 look - 11 loops (the number of finished branches is 8)
Type 5 - 13 loops (number of finished 6 branches)
3. Now you can start assembling. We take a wire 20 cm long, 2 mm thick. It will serve us as a trunk, or even some kind of support.
We take a branch of the 1st type, in which there are 5 loops, place it at the very top and fix it with tape (floristic). It should be wrapped well so that no gaps are visible. A little lower we fix 3 more branches of the first type. We also go through the tape.
We do the same with the rest of the branches, observing the order by type.
Please note if the number of branches is 6-12 pcs. and more, no need to place them all in one line. Divide them into equal numbers, for example 1 layer of 3 branches, then repeat the second.
I don't think there should be any issues at this stage. But if something is still not clear, write in the comments below, I will be glad to help you with an answer.
4. Now that our New Year's beauty is fully assembled, you can straighten her branches. Give it a more attractive look. Next, we proceed to the manufacture of the stand. For this we need not a deep bowl. It can be made from any material. We put a plastic bag inside it, pour a diluted alabaster mixture on top. Don't make the mixture too thin. The consistency should be in the form of porridge.
Fill the bowl with the prepared solution. And carefully insert our beauty, the barrel should touch the bottom of the dish. Hold it for a while until the solution seizes. Then you can release and let dry completely.
Congratulations half the job done. When the mixture is completely dry, carefully take out our work. It should not be pulled sharply by the top. Please note that the product is quite delicate and one awkward movement can ruin it.
Look at the barrel, do you agree that it is not quite finished yet? I think it needs to be expanded a bit. To do this, take a piece of gauze, dip it in the rest of the alabaster mixture. We take it out of there and wrap it around the bottom of the trunk. Giving some form to the tree.
While the solution on the trunk is not dry, you can create grooves. To do this, take a small sharp skewer and walk along the trunk, drawing the usual uneven lines. Now let the work dry. Then you can start painting. We will paint with acrylic paint. You can use watercolor, but unfortunately it is not so saturated and it will have to be applied in several layers.
Let the paint dry, then you can varnish the barrel again. To make the tree look more believable.
Well, all the main stages of manufacturing work are completed. It's time to start decorating. We will start from the lawn of our Christmas tree. Apply a colorless adhesive to a flat surface (for example, for ceiling tiles). Then gently sprinkle with white glass beads. Making some kind of snow.
Our beauty is almost ready, give her some time to dry. In the meantime, you can start making toys for decoration.
To create toys, we will use a bright red color and a similar wire color. We string 6 beads and twist into a loop. Then we collect two more beads on one of the ends. And we pass them through one located in the very middle. This way they will be in the center.
We put a small piece of wire on the finished ball, which will serve as a suspension for us. Then we fix it on the branches of the Christmas tree and cut off the excess ends.
Our product is ready, you can give it to someone close to you. Or leave it at home and decorate your apartment with it.
Christmas tree weaving patterns
You can weave such a beauty in absolutely different ways. Everyone will have their own production technique. I wandered around the Internet a bit and put together a small but very interesting selection for you. Thanks to which you will surely make a choice and get to work. But first, of course, you need a little perseverance. Ready to listen? Then let's go and quickly get down to business.
And here is one of the first and probably the easiest schemes. Which will be the first work if someone hears about beads for the first time.
By the way, such a Christmas tree can become an ideal pendant or brooch. And some needlewomen use this pattern to make earrings.
Here is another work similar to the previous one. True, here they played a little in color, which makes it several times brighter and more interesting. No less original idea of a Christmas tree can be seen nearby. It turns out to be quite petite. But despite this, it is very resistant and can stand for more than one year in the house in the form of a souvenir.
It is necessary to start weaving such a Christmas tree from the crown. First of all, we weave a star, then we alternately go down below. Follow the color scheme shown in the picture. By the way, wire is used for weaving such work. You can stick a magnet to the finished product and voila, an excellent decoration for your refrigerator is ready.
I could not leave this Christmas tree unattended, it is so openwork. This technique is available to any beginner. But you still have to try.
I would like to talk about needle weaving. I think probably each of you has already imagined how this Christmas tree will look like in reality. I promise it will be very nice. Thanks to this technique of execution, we seem to be reviving a living version of the tree. And on our finished work you can see identical needles.
By the way, we will talk about detailed weaving today in more detail. Since this technique is very popular.
I think it's time to end at this stage. It's time to start the next scheme, which we have already met a little. Let's get ready it will be very interesting.
Needle weaving of a three-dimensional Christmas tree - step by step video
What could be better than a step by step process. It's great when everything is very step by step explained and even told. I decided to dedicate the video to this particular title, because this work is not so simple. Perhaps at first glance you will say that everything is easy, but you will have to work hard.
It turned out to be an unreal beauty. Be sure to use this technique to make a New Year's symbol. Let the family enjoy the awesome decor for your apartment.
Original tree from the cabin with toys
An incomparable version of the Christmas tree with toys. This work looks perfect. Yes, and the manufacturing scheme is available to every beginner. Of course, you need desire, perseverance and maximum diligence. I promise that if you have all these qualities, everything will work out.
Such a craft will become an original decoration of the house. By the way, you can use the finished product as a gift and present it to your loved one. Because you don’t want to give such a toy to an ordinary friend. After all, so much work will be invested.
Cutting is one of the forms of beads. Which is made in the form of small tubes, chopped off on both sides.
To make this forest beauty, we need:
- Green beads (cutting) and a little brown
- Wire
- Beads of different colors
- decorative stones
- Pot (small)
- Alabaster
- Scissors
Manufacturing technique:
1. Let's start making our Christmas tree. We will start weaving it from the very top according to the scheme. We cut off a wire 50 cm long. We string the following combination of beads on it: golden beads, glass beads, a bead of gold and silver shades, a green felling.
Now that the whole combination is assembled, we proceed to the next manipulation. We thread the thread through the glass beads and the rest of the beads located below. Immediately note that our entire structure should run in the center.
If you did everything right, then the result should be two even ends of the wire. Now we put on 4 green beads on each side and twist the ends together (two or three turns).
Now on each of the sides we again put on beads of the corresponding color (as in the photo) in the amount of 10 pieces. And again twist in two turns. Thus we get two loops.
2. Repeat this manipulation again to get 4 loops already. And smoothly proceed to the manufacture of the second tier. We will prepare it separately, then attach it to the base.
We collect a combination of beads, as shown in the second part of the picture. We fix the loop again by twisting the wire 2-3 times. Then we repeat a similar process only on both sides.
As a result, we should get four such branches. By the way, for their manufacture you need to take a wire 25 cm long.
Please note that each of the loops is made at a different level. To make it work for you, increase the number of revolutions in the right places.
3. Third tier: cut a wire 30 cm long. In this case, the whole process is similar to the previous one. The only thing is that the number of loops will increase by 2 pieces. We need such branches in the amount of 4 units.
4. We proceed to the manufacture of the fourth tier. We cut the wire 30 cm long in the amount of 8 pieces. We repeat the whole process similar to the third paragraph. But since the number of finished branches we have increased, now our task is to fasten them in two. Thus, we get 4 ready-made branches for the fourth tier.
5. The fifth tier is similar to the previous one. We cut a wire 35 cm long. We make 4 branches of 7 loops from it. We are preparing for the manufacture of the sixth tier. We cut the wire into 8 pieces of 35 cm each. Weave 5 loops on each. Then we connect two by two, i.e. took one finished branch and connected to the second. And only then we wrap them with a common metal thread.
7th tier (shown in the second part of the picture) we make a loop in the very center of the wire. Then from it 3 more loops on each side. We repeat the same steps at the second end. It's okay if the metal thread becomes a little shorter. To make this tier, we need 4 pieces of wire 60 cm each. On the last loop, twist the two ends of the thread in two turns between each other. Thus we get one whole.
6. Consider the last layer and then proceed to assemble our beauty. We stock up on patience here, it will be useful to us a little more.
8th cut the wire in the amount of 4 pieces of 60 cm and 8 pieces. 30 cm each. From the length of the thread we make a branch similar to the 7th tier. From the shorter one we make five loops. Now we connect all the resulting branches, as shown in the figure above.
Congratulations on one task, you coped, it's time to start assembling the finished product. There is nothing complicated here. We just start connecting all the tiers to each other, starting with the smallest.
To make the finished work look prettier, at the end, additionally wrap all the junctions with wire. Well, our beauty is ready. Let's put it in a pretty pot. To do this, dilute a small amount of alabaster, fill it with a prepared pot and set the trunk evenly. Let the mixture dry completely, only then you can start decorating the bottom.
If you are using a clay container. Before filling it with a ready-made solution, fill it with unnecessary material (sponge, cloth or paper). This is necessary so that the pot does not burst during the drying process.
I remember that at the beginning of the article I promised you a Christmas tree with toys. Let's do them together, there's nothing complicated here. We take multi-colored beads and wind a small amount of wire around them. Fasten on one side. The toy on the pendant is ready, you can hang it on the Christmas tree.
By the way, if you want the trunk of the finished tree to be green, you can use floral tape. It can be purchased at any craft store. And yes, you can choose the colors to your liking.
These are such wonderful ideas for making forest beauties that we considered today. Do not delay, decide on the option and get down to business. There is very little time left. If you start now, you can do a lot of things.
Until we meet again friends!!!
Christmas tree with golden nuts.
Materials:
Beads green and brown,
wire 0.4, threads,
floss, for winding branches, and trunk.
stiffer wire for the frame.
gypsum
PVA glue,
decor,
acrylic varnish.
Several tiers of branches, you can repeat, but increase downwards. to create the correct shape. I wrapped the trunk with thread, not all of it. when I put it in a plaster stand (a stand made of gypsum combined with water), I coated the lower part with a mixture of gypsum and PVA glue (one to one, the mixture is thick, but not very thick, applied with a brush, or not very thin stick, creating an image of bark). After that, she decorated with moss, stones, beads.
Author luna
Beaded Christmas tree in needle technique.
For work we need:
Bead-cutting 2-3 colors, I took 2 colors, it took me about 80 grams;
wire 0.3 mm - 3 coils, it is advisable to have pliers on hand, as it will be easier to pull the wire.
Our branch will be done according to the following scheme:
"needle" of 7 beads in the center, around it 4 needles of 5 beads (arbitrary alternation of colors).
Then we put 2 beads on both ends of the wire and make the next row of needles, 4 pieces of 5 beads each, then again 2 for passing and another row.
To make a needle, we pass the free end of the wire in reverse through the 4 lower beads, pulling them tightly to the base.
The branch should not "fall apart".
3-4 small branches can be twisted into one large one.
We leave one in the center, this will be the crown, we begin to form a circle around it, carefully braiding the trunk with wire. After all, there will be no trunk as such, the branches fit snugly against the wire in the center.
Make 5-6 rows in a circle for a small Christmas tree, or more if desired.
When the Christmas tree is ready, we will make the base. Do not rush to straighten all the needles, you will do this later.
I need a fairly large base, because the tree will go as a gift and it will be necessary to make an inscription on it, but it can be made smaller.
A box of baby juice came up to me, into which I poured gypsum mortar and inserted a Christmas tree. When the plaster hardened, I cut the box and took out the Christmas tree.
Base decor - according to your desire, you can make grass, you can make snow - anything!
After painting, you can straighten the branches and give the work its final look.
The cabin sparkles amazingly!
And if you put a few drops of spruce essential oil on the base, it will turn into a healing forest guest!
Author Inna Vuymina
Christmas tree from the cabin.
To make one beaded Christmas tree with your own hands, you will need:
Green cabin - 50 gr.
brown cabin - about 5g.
brown wire (or copper) about 50m
alabaster
colored stones (or other decor)
two pearl beads
glass beads
stand
The Christmas tree consists of 10 tiers. Each tier has four branches.
We start weaving a Christmas tree from the top. We cut off a wire 45 cm long. In the middle of the wire, you need to string a gold-colored bead and a group of white glass beads, gold and silver beads, 1 green-colored bead-cutting. Pass the second end of the wire through the entire group. String 4 green beads on each end of the wire:
After that, twist both ends of the wire together for 3-4 turns. At each end of the wire, dial 4 green beads, 2 brown, 4 green, twist into loops.
Twist the ends of the wire 2 turns and make the same two loops as shown in the following photo:
We turn to the manufacture of the second tier of the Christmas tree from beads with our own hands. We cut off 4 pieces of wire 25 cm long. We make 4 branches of three loops from them with a set: 3 green beads, 2 brown, 3 green.
From loop to loop, twist the wire 4-5 turns, from the last loop 3 turns.
Let's start making branches for the third tier of a Christmas tree woven with our own hands. To do this, from 4 pieces of wire 30 cm long, we make 4 branches of 5 loops. The first three loops, as on a branch from the second tier, in the next two loops, instead of three green loops, dial 4:
As you understand, you need to weave 4 such branches, as in the photo above. After that, we prepare branches for the fourth tier of the beaded Christmas tree. This will require 8 pieces of wire 30 cm long. You need to make 8 branches with five loops in each:
The first three loops, as can be clearly seen in the photo, are the same as on the branch from the second tier, in the next two loops, dial 6 green beads each. After the last loop, twist the wire down 4-5 turns. From two such branches, collect one by screwing them with a spiral for 3-4 turns:
5 tier: from 4 pieces of wire 35 cm long, make 4 branches of 7 loops. The first three loops, as on a branch from the second tier, in the next four loops, dial only 6 green beads.
6th tier of the Christmas tree: we start it in the same way as the 4th tier (8 pieces of wire, 8 branches of five loops each) But we collect the branches in pairs a little differently. It is necessary to cut off an additional piece of wire 20 cm long. From the last loop, wind 12 turns with a spiral with additional wire. Then screw the second branch into 15 turns with a spiral:
Twigs for the 7th tier of a Christmas tree made of beads: cut 4 pieces of wire 60 cm long. Make the first loop in the middle of the wire. Next, dial 6 more loops, as on the 6th tier, on the same end of the wire so that the other end remains long.
After the last loop, twist 6-7 turns. On the other (long) end of the wire, also make 7 loops:
With additional wire, twist the branch with a spiral down 8 turns.
8th tier: cut 4 pieces of wire 60 cm long and 4 pieces of 30 cm each. Twist branches from 60 cm wire, as for tier 7, from 30 cm wire - branches with five loops:
From these two branches, collect one, screwing them with a spiral. First, start a spiral on a branch with two ends - 15 turns, then screw a small branch into 15 turns:
Tier 9: same as for Tier 8, only increase the number of turns of wire from 15 to 18.
Tier 10: cut 4 pieces of wire 70 cm each, 4 pieces 35 cm each. Make branches in the same way as for tiers 8 and 9. Only dial 8 and 9 loops in a large branch, 7 in a small branch. The number of turns of the spiral increases to 22.
Now the branches for all the tiers of our beaded tree are ready, you can start assembling the tree.
Take an additional wire (do not cut off from the coil!) And, starting from the top, wrap the ends of the wire down.
An additional rod is not required, because. due to the number of tiers (and branches in each of them), the trunk thickens and does not bend.
The distance between the tiers is from 0.8 cm (from the top) to 1.2 cm (towards the bottom).
After assembly, it remains to plant the Christmas tree in a stand. To do this, you need to dilute the alabaster and stick a Christmas tree into it, wait until the alabaster dries. Then, using transparent glue, decorate the frozen alabaster soil with colored pebbles, moss, cotton wool with sparkles, and beads.
Here is our resulting green beauty, it even seems that the festive aroma of pine needles is in the air:
A Christmas tree can be made not only from beads or cuttings, but also from glass beads. In addition, the Christmas tree can be dressed up:
Author Elena Bashkatova
Little green tree.
To make a small green Christmas tree from glass beads, you should prepare for work:
Copper wire 0.3mm (for twigs);
- copper wire 0.5 mm (to stiffen the branches);
- aluminum wire 3mm (for the trunk of the Christmas tree);
- green glass beads (for a fifteen-centimeter tree you will need 300 grams);
- floral tape (green or brown);
- PVA glue, alabaster, wood stand.
The Christmas tree shown in the photo can be made in a week, with a load of 3-4 working hours a day. For a set of glass beads on a wire, it is convenient to use an automatic bead stringer.
Initially, we mix all the glass beads in a special container. We begin to collect glass beads on the wire, we collect about 4 meters, without tearing the wire from the coil, we begin to make the first branch.
We put 2 pieces of glass beads put on the wire together. We fix for 1-2 turns. On the other hand, we do the same.
Thus, we should make strips:
4 strips for the branches of the first row and crown of 5 cm.
3 strips for the branches of the second row of 6 cm.
3 strips for the branches of the third row and crown of 7 cm.
We put on a 5 mm copper wire folded in half along the strip, tighten the strip a little (up to about three centimeters - on the branches of the first row), twist everything - the branch is ready.
For the manufacture of branches of the fourth and further rows, we proceed according to the following scheme: From about the fourth to the eighth row, we make branches consisting of two small ones. Try to keep the branches of each new row longer than the previous ones, by about 1 centimeter.
The branches of the remaining, lower rows are made of three branches. In this case, the central branch will be twice as long as the side ones.
It is not necessary to do all the branches in advance. The Christmas tree is not made like all beaded trees. It is more convenient to collect it right away - so you will see how many branches are required in each row, and how long they should be made.
We fix one branch on the wire - this is the trunk and crown. On the sides we fix three small branches of the first order, wrap with floral tape.
Below, stepping back a centimeter, we fix 3 branches of the second order.
Thus, we fix all the branches from top to bottom, wrap the trunk with floral tape. Since the trunk of the Christmas tree will not be visible, it does not need to be painted.
We fix our Christmas tree in a stand, using children's plasticine (for stability). We impose a mixture to fix the Christmas tree in the stand (alabaster 2 parts + PVA 1 part + water). After the mixture has not completely dried, we decorate the pot with multi-colored pebbles, they will stick. The mixture will dry and our Christmas tree is ready!
Fluffy beaded Christmas trees:
Different shades of green beads will come in handy for work.
You can mix different colors, so the Christmas trees will get a special, individual look. One tree requires a minimum of 60 grams of Chinese large beads (number 8).
Be sure to take the wire reinforced, thick, so that it can hardly get into the bead.
Thick copper wire is the key to the beautiful shape of the branches of our Christmas tree.
In addition, we need floral tape, gypsum, gouache, pliers, aluminum wire (for the trunk) and decorative elements for the final decoration of the New Year's crafts.
How to make a Christmas tree from beads. We use a spinner to string the beads onto the wire. It is necessary to collect ALL the beads on the wire IMMEDIATELY.
Let's start weaving in loop technique. The essence of weaving is simple - we need to make a large number of loops from all the beads, constantly increasing their size. We start with loops of 12 beads.
In the second loop we will make 13 beads, in the third - 14.
You can increase the number of beads in the loops, not counting, "by eye".
As a result, such a complex structure should be obtained from parallel-running, constantly increasing loops.
For the crown, we will make a small bud. We weave an element of 5 loops, the legs of which are assembled at a single point.
So that the wire does not attract attention, we will make it invisible. Paint the wire with green acrylic paint, wait until the paint dries.
Now you can begin to form the tree itself. To do this, take a piece of aluminum wire and bend the loop on one side. On the other hand, we will fasten the top of the spruce.
It is necessary to securely fix the crown - wrap the entire trunk of the tree with floral tape.
Now we wind the wire with dialed loops. Closer to the crown, you need to place the end of the element with small loops.
We fix the attachment point again with floral tape.
Finally, we can form our Christmas tree! Carefully wrap the wire-barrel with our loops-twigs.
Each loop will have to be gracefully bent, this will give the tree the necessary volume.
Mix gypsum or alabaster with water - from this mixture we will make the lower part of the tree. We pick up a round mold, cover it with a bag, pour the mixture into it, and install a beaded spruce in the center.
When the plaster hardens, the tree can be removed and freed from cellophane.
Let's give the foundation a little rest. For now, let's decorate the crown. For this, multi-colored rhinestones are useful.
We glue rhinestones on branches of beads. We use simple PVA glue.
While the rhinestones are sticking, we will continue to work on the base of the Christmas tree. We will direct a little gypsum mixture and coat the lower part of the beaded Christmas tree trunk with it.
The barrel can be painted with green acrylic paint.
Do not forget about the "bottom", paint it white.
We apply white acrylic paint to the base of the tree.
When the paint dries, let's turn on the fantasy. The base can be varnished, decorative primer and decorations can be glued onto it.
Fairy tree.
We need for 2 Christmas trees
Wire (thickness 0.4 mm length 10m),
beads (10 g),
sequins (20g pack),
scissors,
cork from a plastic bottle,
gypsum,
decor fabric,
braid,
ribbons
We string beads, sequins, beads on a 16 cm long wire ...... 3 branches of 10 sequins each (note that we start with beads and end with beads, and the sequins should also be convex side in one direction) 5 branches of 15 sequins, 5 branches of 20 sequins, and 5 branches of 25 sequins (10g of beads and 20 g of sequins are needed for 2 Christmas trees)
I string alternating beads and sequins in a row, and when I twist the branches, count the sequins, I shift the bead, move it away, cut off the desired length (it should not be small, then it’s convenient to twist) and twist the twig, string the next bead, count the sequins, etc.
This is what should happen, we twist the Christmas tree 1 row - a branch of 15 sequins, the second row - 3 branches of 10 sequins, the third row - 4 branches of 15 sequins, the fourth row - 5 branches of 20 sequins, the fifth row - 5 branches of 25 sequins (if you wish, you can continue 5 branches of 30 sequins ....). ku from a plastic bottle, dilute gypsum and fill our Christmas tree
Author Lyubov Zenkina
Christmas trees made of sequins and beads.
It was convenient for me to string beads with sequins like this: I poured a few sequins into a bowl with beads, "poked" the wire into the sequins and immediately passed among the beads (mostly one of them was strung)
This is how the Christmas tree is going in tiers.
Under each tier, we twist all the wires a little
Here's how I made the stand:
When all the tiers are assembled, we twist all the wires together and string a bead with a huge hole (I had dark wooden ones);
- Carefully unwind the wire BEFORE the beads and divide it into 3 bundles;
- We twist each bundle separately.
We combine the beams, measure somewhere 3 cm and cut off the excess;
- We bend the legs, bend the ends.
These are the kind of sympathizers turned out.
And I decided to experiment with this - I made it from mother-of-pearl sequins-flowers. But since there were few of them, then the number of sequins was reduced, and the number of beads was increased. It worked out well too :)
In this version: we string on a wire: beads (2 pcs), sequins, beads (2 pcs) ... We start with beads and finish with beads.
1st row - a branch of 7 sequins, 2nd row - 3 branches of 5 sequins, 3rd row - 4 branches of 7 sequins, 4th row - 5 branches of 9 sequins, fifth row - 5 branches of 11 sequins.
I offer my own packaging.
So, from a plastic bottle with a narrow neck, cut off the upper part using the "cutting off the excess from the bottom" method. We cover the Christmas tree and see that it is not too crowded "under the dome" and that it does not "flop" much.
According to the shape of the bottom of the finished "dome", we cut out the BOTTOM from plastic for our packaging (put the "dome" on the plastic, circle it, cut it out).
We attach the bottom to the "dome" with pieces of adhesive tape as follows: in the place where the bottom will be fixed in the open state of the package (photo on the right) - just a piece of adhesive tape, and where we will open the bottom - we leave a "tongue" at the end of the adhesive tape from the side of the bottle (just bend a piece of adhesive tape and glue it to itself
It is impossible to glue the bottom tightly, because. You can't get the Christmas tree through the neck of the bottle.
Author Yonya
Christmas trees from sequins
We will need:
Beads (you can match the sequins, or you can use a different color)
sequins
braiding wire
hard wire for barrel
winding threads
a container for planting a Christmas tree (I have an ordinary cream stopper decorated with candy foil)
The Christmas tree consists of 17 branches + crown.
First, we string sequins on the wire, alternating beads. Then we count 17-20 sequins and twist the loop. This will be the crown of the Christmas tree
The first row of branches consists of 4 loops of 10 sequins twisted close to each other
Second row: 4 branches of 3 loops. The loop consists of 15 sequins
Third row: 4 branches of 3 loops. The loop consists of 20 sequins
Fourth row: 4 branches of 3 loops. The loop consists of 25 sequins
Fifth row: 4 branches of 3 loops. The loop consists of 30 sequins
When all the elements are woven, we collect our Christmas tree. The distance between the branches during assembly is 0.8-1 cm. After assembly, we plant our Christmas tree in a suitable container, decorate and admire our beauty
Author vfhecz32
Little tree.
For work, we take green and white beads. We collect 11 beads in the middle of the wire in the following sequence: 4 green, 3 white and again 4 green.
We twist the loop.
In the same sequence, we collect beads on one end of the wire
And we form a loop.
In the same way, we form a loop at the other end of the wire.
Thus, we form branches for the top. The branch consists of seven loops. We will need 4 of them (do not pay attention that there are more of them in the photo!) We twist all the branches together and form the top (sorry, there is no photo). We wrap the ends of the wire with floral tape.
And twist them together.
We bend the loops to the edge.
We wrap the ends with floral tape. We need 5 pieces of such blanks for one tier.
When all 5 blanks are ready, we fasten them to our top with the help of florentine.
The top with the first tier is ready!
For the 2nd, 3rd and 4th tiers, weave branches as for the top - from seven loops. For one tier - 10 branches.
We twist the branches in pairs - we get 5 blanks for one tier. Wrap with florentine.
We fasten the branches to the Christmas tree. The second tier is ready! Similarly, we do the 3rd and 4th tier. But for the 5th, the number of white beads in the loop is increased to 5. Those. our loop consists of 13 beads: 4 green, 5 white and 4 green. The number of loops on the branch is 7. For the 6th row, we form a loop from 15 beads: 4 green, 7 white and 4 green.
In principle, your Christmas tree may have more tiers, but it seemed to me that 6 is quite enough. After we have finished the last tier, we select a suitable "vessel" - in my case it is a candlestick. Then we dilute gypsum with water 1: 1 and "plant" our Christmas tree. When the gypsum dries, you can cover it with a shiny varnish and sprinkle with white beads - it will be beautiful. And you can come up with a more interesting decor. Create! New Year is not far off! Please your loved ones with such a New Year's surprise of your own making!
Author mari-m26
New Years is soon.
To do this, we need beads, wire cutters, wire and always a good mood.
String beads and twist into a spiral.
Optionally, we connect two, three spirals, more. It all depends on your taste.
Author Marina Zyablova
Christmas trees-beauties from beads.
Pendants-decorations for a fluffy beauty.
For work you will need:
Green beads (mixed 2 colors light and dark) as the main color of the Christmas tree;
- colored beads for the "garland" near the Christmas tree;
- wire (I have thin copper);
- a bead (at the top of the Christmas tree);
- (for the leg) little thing, see as in the diagram above:
We take 3 pieces of wire, approximately 25-30 cm each, put them together and twist them in the middle by cm 2.
We bend in the middle, form a loop and twist it about 1 cm down.
We put on a bead (of any beautiful shape) on this twist and straighten all 6 wires under the bead - the twist remains only under the bead.
We string beads onto our 6 wires - 2 wires with green beads, then 1 with colored beads, then again 2 with green and 1 with colored ones (everything is visible in the photo). Somewhere along cm 6, segments with beads turned out.
You can make any colored "garland" (for my version, see photo No. 11)
To prevent the beads from flying off the wire, we make a twist loop at the very ends (then it will be cut off).
We add our wires strung with beads (all of the same length - I have 6 cm each) in the same order - 2 green, 1 colored ... as in photo No. 8. And twist all the wires together (where there are no beads).
We bend the wires in the form of "pepper".
Holding the top with one hand, the bottom with the other, twist as in the diagram (photo No. 3) where the number is 7
Under the Christmas tree, just twist the wire
 |  |
 |  |
Author Yonya
The most logical New Year's decoration made of beads will be a snowflake. There are an incredible variety of bead snowflake patterns: from the simplest for beginners to incredibly complex ones, consisting of several tiers. As a connecting element, you can use fishing line, wire, thread, as well as pins and the most common glue.
# 1 Snowflake from beads in a hurry: do-it-yourself Christmas decorations
For those who have absolutely no time to prepare, a snowflake made of wire and beads would be an ideal option. To create such a masterpiece you will need: wire, glue or thread (for fastening the wire), beads or beads. Cut several identical pieces of wire (3 or more), fasten them in the middle (with glue or thread), string beads on the free ends. Snowflake is ready!
#2 Quick snowflake made of pins and beads: DIY Christmas craft
For such a snowflake, it is best to have in your arsenal not only beads, but also other beads of different sizes. You will need: pins, fishing line, beads of different sizes, scissors and glue. See step-by-step photo instructions below.
# 3 Master class from beads: do-it-yourself snowflake for the New Year
So, we complicate our product. This snowflake has its own manufacturing scheme, which must be followed. You will need: fishing line, scissors, beads and beads. See the detailed snowflake diagram below.
#4 Snowflake from beads: a master class with a step by step photo
For beginner craftswomen, this New Year's snowflake pattern will be a great start. Of the tools you will need: fishing line, scissors, needle, beads. It is better to take beads in two colors, so the craft will look more spectacular.
# 5 DIY beaded snowflake for the New Year: scheme
To make such a craft, you will need several types of beads: this way the snowflake will look incredibly realistic. See below for a detailed bead size chart.
#6 Beaded crafts for beginners: snowflake pattern for the New Year
To make such a snowflake, you will need beads of different sizes and colors, as well as a fishing line. A detailed beading scheme is described below, the diagram also shows the sizes of beads that should be used in the manufacture of this New Year's craft.
#7 Christmas bead craft: DIY snowflake pattern
And one more unusual scheme of the New Year's snowflake, which you can bring to life with your own hands. A detailed diagram is painted below, indicating the sizes of beads needed for crafts.
# 8 Beaded snowflake pattern: making New Year crafts from beads
Another fairly simple, but at the same time charming snowflake pattern of their beads. You will need fishing line and beads of different sizes and colors. A detailed manufacturing scheme is shown in the photo below.
#9 Beadwork: Snowflake Pattern
This is such a charming craft that any needlewoman can do. Unless it will be difficult for beginners, but nothing is impossible. Below is a detailed diagram that will help you master the technique of beading.
New Year's Angels from beads
Another symbol of the New Year and Christmas is considered to be an angel. Cute angels can be made from beads, and then decorate a Christmas tree or a house with these beautiful crumbs. An angel made of beads can be made as a gift to people close and dear to you so that it protects and helps.
#1 A simple angel made of beads and wire: a master class with a step by step photo
A very simple angel, which even beginners can handle. It will take you about 10 minutes of time and a cute beaded angel for the New Year is ready! Step-by-step photo master class, see below.
# 2 New Year's angel from beads: do-it-yourself crafts for the New Year
Another variation of beadwork on the theme of angels. The scheme is quite simple, you will need: wire, scissors, beads and beads of different sizes, a chain or ribbon. See below for step-by-step photo instructions for making crafts.
#3 Beaded angel: do-it-yourself Christmas crafts
A more complex version of the Christmas beaded angel. You will need patience and experience in creating masterpieces from small glass beads. See the step-by-step master class with the photo below.
#4 Cute angel made of beads and beads with your own hands: scheme
Here is another diagram of an angel made of beads and wire. It is very similar to option number 1, but there are slight differences that make the craft more realistic. See the diagram in the photo below.
Christmas tree made of beads
The most important attribute of the New Year holiday, without which it is simply impossible to imagine, is the New Year tree. If for some reason you do not have the opportunity to acquire a big green beauty, you can replace it with a miniature Christmas tree made of beads. Here you will find master classes on making Christmas trees from beads for both beginners and beading professionals.
#1 Simple Beaded and Wire Christmas Tree: Christmas Beaded Crafts for Beginners
Even a child can cope with such a New Year's craft. By the way, beads develop fine motor skills well, which is useful not only for children, but also for adults! Step-by-step instructions with a photo are given below.
#2 Beaded Christmas tree: do crafts with the kids
Another version of a simple New Year's craft that you can do with your children. The Christmas tree will turn out bright and cheerful if you use beads of different colors and sizes. See the step by step tutorial below.
#3 We make a Christmas tree for the New Year with our own hands from beads and glue
Such a craft can become a very original decoration or even a gift. You will need glue, thick paper and scissors. Draw on paper the silhouette of the future Christmas tree. Then carefully glue the bead along the contour. wait for it to dry and cut the finished product. The work is painstaking, but if everything is done correctly, an indescribable beauty will turn out!
#4 Tree from beads: a master class on making a Christmas tree
An excellent element of decor will be a miniature Christmas tree made of beads. To create it, you will need two types of wire, a lot of green beads and red beads of a slightly larger diameter. Step-by-step master class, see the photo below.
#5 Beading: Christmas Tree Masterclass
You can make such a cute Christmas tree pendant from beads, which, by the way, can be hung like a toy on a Christmas tree. You will need wire, green beads, white and orange beads. Step-by-step master class with a photo, see below.
# 6 We make a Christmas tree from beads with our own hands: a diagram
A small Christmas tree can also be made in this way: You will need a toothpick or other thin stick, beads and fishing line. According to the scheme, weave several cruciform bases with a round hole in the center. The bases must be of different sizes. Next, string them on a stick, starting with the largest. The top can be decorated with beads of a different color.
# 7 Christmas tree made of beads: master class + photo
We complicate the task. In this master class you will learn how to make a Christmas tree from beads with wire. For crafts, you will need wire and beads of two colors (green and white). You make each branch separately, and then twist them together and get a fluffy Christmas tree. Detailed photo instructions are below.
# 8 Do-it-yourself Christmas tree scheme from beads: making New Year's crafts
Another diagram of a Christmas tree made of beads and wire. Additionally, you can use multi-colored beads of different sizes, which will look like Christmas balls. The scheme is detailed in the photo below.
#9 DIY mini Christmas tree made of beads and beads
Miniature Christmas tree made of beads and beads. Suitable for more experienced craftsmen. A detailed diagram is shown in the picture below.
# 10 Christmas tree from beads: a master class with step by step photos and a diagram
Another version of the Christmas tree made of beads and wire. At first glance, some of the Christmas tree making workshops in our article are similar. And indeed it is. They are similar, but the techniques are different. Experienced craftsmen will immediately notice the difference, and for beginners we recommend that you follow the instructions carefully and carefully study the manual.
#11 Christmas tree with beads: a master class with a photo
This version of the green beauty is a little simpler than the previous one, but in general the manufacturing scheme is similar. You will need fishing line, green and white beads, and step-by-step instructions for beading.
#12 Christmas tree from beads: a step-by-step master class
For the most experienced needlewomen, we offer a master class on making a Christmas tree from beads. A very painstaking work awaits the craftswoman when creating such a masterpiece. Each branch is made separately, and then wound onto the main stem. See step by step photo instructions below.
See also:
Other New Year crafts from beads
For the New Year, you can make other crafts from beads for which you have enough imagination. Well, what are the New Year holidays without gifts, Santa Claus, cones, sweets, wreaths, stars? All this and much more can be made from beads with our step-by-step master classes.
# 1 New Year's beaded bell: a master class with a photo
An excellent New Year's decoration will be a beaded bell. To create it, you will need wire, beads and beads, scissors, a safety pin, a chain or ribbon. Step-by-step MK with a photo, see below.
# 2 Mint beaded lollipop: doing beadwork for the New Year
You can also decorate the New Year tree or the interior with themed beaded mint sweets, which we are well aware of from Hollywood films. The weaving pattern and a step-by-step master class are shown in the photo.
#3 New Year's gift from beads: do-it-yourself crafts
A craft gift will look very symbolic as a decoration. You will need wire, beads and beads of different sizes. Master class with step-by-step photos, see below.
#4 Santa Claus from beads: scheme and master class
Well, what is a holiday without a kind old man who delivers gifts? Here we will make a bourgeois colleague of our Santa Claus. The scheme is simple, suitable for beginners. You will need red black and white beads.
# 5 Master class on beadwork: do-it-yourself New Year's cone from beads
Well, what is a Christmas tree without cones? Now we will tell you how to make a cone of beads with your own hands. To do this, you will need a foam oval blank, brown or golden beads, fishing line. For beginners, such a craft will be difficult: you will have to spend a lot of time and effort. But experienced craftswomen will like the New Year's beaded cone. See the step by step tutorial below.
#6 Master class: beaded Christmas wreath
Usually, the front door is decorated with Christmas wreaths, sometimes it is also hung on the wall to create a festive atmosphere. But you can make a small beaded wreath and use it as an element of New Year's decor. MK beading see below.
# 7 DIY beaded wreath: MK with photo
There can be a great variety of variations on the theme of a beaded Christmas wreath. Having gained a little experience, you can independently generate ideas for schemes, but for now, take note of our crafts and schemes.
#8 Beaded wreath for the New Year: beading master class
Well, the most difficult version of a beaded wreath. You will have to try, but the result will exceed all expectations. With such a craft, it is not a shame to go on a visit, taking a wreath as a New Year's souvenir.
You may be interested in:
# 9 Beaded star: do-it-yourself New Year's crafts master class
You can make such a cute bright star with your own hands using our step-by-step master class. You will need wire and beads of different colors and sizes.
Bead jewelery
It is worth preparing thoroughly for the new year: you need to decorate not only the Christmas tree or the house, but also your beloved one. You can make incredible themed jewelry from beads with your own hands and illuminate everyone around with a good mood. By the way, you can make the same jewelry for friends, sisters or for mom and daughter. In general, turn on your imagination and go ahead - create!
# 1 New Year's pendant snowflake: do-it-yourself decorations, MK
It is relevant during the New Year holidays, and in general with the beginning of winter, to wear handmade themed winter decorations. Here you can make such a beaded snowflake pendant with your own hands following the instructions in our master class.
#2 New Year's pendant Christmas wreath: a master class on making
A pendant in the form of a Christmas wreath will also look relevant on the eve of the Christmas holidays. You will need beads of two colors and a fishing line. You can hang the pendant on a string or on a chain.
# 3 DIY Christmas snowflake earrings made of beads: a step-by-step master class with a photo
New Year's holidays are just around the corner, which means it's time to think about an outfit for the holiday itself. It would be nice to appear at the gala evening in a unique handmade jewelry. With the help of this MK, you can create beautiful themed winter earrings with your own hands.
#4 Simple beaded earrings in haste: scheme + step by step photo
If there is no time, and you really want a handmade themed jewelry, you can make these simple earrings in the shape of snowflakes. You will need: wire (6 identical pieces), beads or beads. For one earring, take three pieces of wire, twist them in the middle to get a one-piece six-pointed design. String beads on the ends and fasten. Add a hook and the earring is ready!
# 5 DIY beaded earrings for the New Year: step by step instructions with a photo
You can make such cute earrings in the form of spruce twigs yourself with the help of our detailed photo instructions.
#6 DIY beaded Christmas deer earrings: mk with photo
Funny deer-shaped earrings can be made from beads with your own hands. The scheme is very simple, even beginners can handle it. But such a product looks very funny, and most importantly - thematically!
# 7 Do-it-yourself earrings in the shape of a New Year's wreath: weaving pattern
Beaded jewelry can be diluted with additional decorative elements, such as a ribbon, as in this master class. The result is an original product, according to which you can’t say at all that the production took a little more than 10 minutes!
#8 Beaded Jewelry: DIY Flat Earrings
To make gift-shaped earrings, you will need three types of beads and wire. From square flat beads weave the base. And glass beads and small beads will be needed for a bow. See the step by step tutorial below.
#9 DIY beaded jewelry: MK for weaving earrings
And here is another variation on the theme of beaded earrings in the form of a Christmas wreath. You will need beads of two colors (green for the base, red for decor), fishing line and our scheme.
#10 Beaded earrings: do-it-yourself mistletoe leaf, MK + photo
Earrings can also be made in the form of mistletoe leaves. The scheme is simple to disgrace, so that novice craftswomen can safely get to work. Step-by-step master class, see the photo below.
A beaded brooch will also become a themed New Year's decoration. In this master class you will learn how to embroider a beaded bullfinch brooch. You will need beads of four colors, pebbles for the eye and chest, rhinestones for decoration.
#12 Beadwork: do-it-yourself New Year's mask
You can embroider a New Year's mask with beads. To do this, you will need a blank openwork mask. And then embroider it to your taste with beads of different colors.
Beaded crowns
Little princesses can make chic beaded crowns for the New Year. Small glass beads look like real gems on New Year's holiday, a small snowflake or a princess will look unique. In addition, a beaded crown can be made together, and the child is busy and mom is happy!
#1 Master class on how to make a beaded crown: the crown of the Snow Queen
You can make a real crown of the Snow Queen with your own hands from beads and beads. The work is painstaking and will require a lot of time and effort from you. However, the result is worth it: a step-by-step master class with a photo, see below.
#2 Beaded snowflake crown: MK + photo
You can make a small snowflake headband with a snowflake that will look like a real crown. See the detailed diagram and step-by-step master class below.
#3 How to make a crown of beads and beads: MK princess crown
A detailed scheme for making a princess crown from beads and beads. Treat yourself and your little princess with a handmade product.
Help us become better: if you notice an error, highlight the fragment and click Ctrl+Enter.
It is very pleasant to create beautiful gizmos with your own hands. This activity is exciting for every craftswoman. Craftswomen are very pleased to work with beads. There is no need to be surprised! After all, beads of various colors can resemble expensive pebbles. By the New Year, mini-Christmas trees are often made from beads. Therefore, in this article we will tell you how to make a beaded Christmas tree for beginners.
How to make a beaded Christmas tree
First master class.
Today there are many master classes on creating Christmas trees from beads. It is worth saying that a beaded Christmas tree can be an excellent souvenir for every person. Look at 1 master class with step by step photos for beginners. Remember that you will surely succeed.
For this Christmas tree, you should use a rod. In this case, a toothpick is used. And as a pedestal there will be an ordinary coin. In order to make a Christmas tree for the New Year, you need to stick a toothpick into a flat bead that is smeared with glue. Glue it to the coin. In order to make branches, you need to follow the scheme. After that, attach them to the trunk. From above, you stick a star, which is a curly bead.
Second master class.
A Christmas tree made of beads, which you can simply make with your own hands, can be an excellent and also useful gift. To create a keychain, you need to prepare:
- large transparent green beads,
- small gold opaque beads,
- a large curly bead, which will be in the shape of a flower,
- a gray bead that you will use as a base,
- thin wire.
This piece is very easy to assemble. Rely on the scheme that we offer you.
Third master class.
You can make interesting women's jewelry from beads. If you make earrings, then this jewelry can be presented to your close friend or sister. To create earrings, you will need special accessories. You can buy it in a specialized store. For crafts, you should buy bright beads. Then the craft will look bright.
Fourth master class.
Before you start weaving this Christmas tree, you need to prepare all the necessary materials. You will need:
- Chinese beads white and green,
- wire that has a diameter: 0.3mm, 1mm, 0.4mm,
- brown thread,
- form and mortar of gypsum,
- varnish based on acrylic and paint.
Step by step master class.
At the first stage, it is worth mastering the needle weaving technique. It is in this technique that it is worth forming single branches for crafts.
After that, it is worth cutting the wire in the amount of 20 centimeters. On this wire, type 8 emerald-colored beads and one white bead.
You should put one edge through all the beads. However, it is not necessary to thread the last thread. As a result, you will get the first needle.
The above manipulations need to be done further. In this case, it is necessary to add and subtract beads in needles from 9 to 5 pieces. You need to do this until the thread of 20 centimeters ends.
And to make a real Christmas tree, you need to make 17 such branches.
In order for the gift - the Christmas tree to get the correct shape, you need to make branches that consist of double and triple needles.
The completed workpiece should be twisted. However, do not twist it all the way. Leave a small edge. To the end, it is worth attaching one branch and twisting its last part of the needle.
As a result, you will get a double spruce branch.
Thus, it is worth making triple blanks. In total, 20 pieces of such blanks will be needed.
Now that all the blanks are ready, you need to move on to assembling the New Year's gift. As a rule, the Christmas tree begins to be collected from above. First, a wire with a diameter of 1 mm is taken. The top of the head is tied to this piece.
Then 4 short ordinary branches are wound to this piece. As a result, you will be able to make the primary tier. Keep winding triple and double blanks.
If you finish doing these works, then you will get a thick spruce base.
Form the barrel and wrap the wire around the barrel with a piece of wire.
If you have completed all the steps, then you should fill in the base of the product. Remember that this affects the height and stability of the craft. To make a base: dilute water with gypsum in equal proportions.
After that, you need to insert the craft into the container. In this case, you must cut off excess parts.
Now wait until the solution hardens.
The tree trunk needs to be painted with paints based on acrylic. After that, the trunk must be varnished.
If the product is completely dry, you need to straighten the branches of the craft. The craft will look more beautiful.
Finally
As you can see, the beaded Christmas tree craft looks very pretty. This product can be a wonderful gift for every person. Therefore, thinking about what to give your loved one, use our step-by-step master classes. Surely, you will get something interesting and very attractive.
