Modular origami little swan. Origami swan - step-by-step instructions and description of a simple scheme for creating a bird from paper. Paper swan made from modules

Paper is a universal, pliable material from which you can make the most unusual things. For example, it is used to create bracelets, hats, earrings, beads, furniture, as well as unique crafts using the origami technique. These can be flowers, animals, butterflies, dragons and other representatives of flora and fauna. The most beautiful and graceful swans are made from paper. It's very easy to make them with your own hands. We will tell you where to start in this article.

Simple paper swan

If you have never dealt with origami before, start with the simplest thing - with the classic paper swan. To make it, take ordinary paper measuring approximately 10x10 or 20x20 cm (choose its dimensions depending on the size of the swan you plan to make).

Next, fold it diagonally so that you get two triangles. Then unfold the square again and fold it into a ball (as for seeds). You will get two triangles coming from one large one, and a small triangular tail at the back.

At the next stage of work, we turn our workpiece over and gradually fold its lower corners, moving them diagonally towards the middle. Now we bend the resulting model in half and carefully process all the fold lines with our fingers. At the top we have a triangle that should be folded downwards. This will be the small head of the bird. Next, bend the figure in half again. Raise and straighten the swan's head up. We make a slight bend for the beak (according to the contours of the small folds formed). So a simple paper craft is ready - a swan. It is very easy to make such a figurine with your own hands. The main thing is to follow all our recommendations.

How to make a swan from a napkin?

A simple swan design can also be used when setting the table. For example, with its help you can really add bright variety to the decoration of the festive table. To do this, make a swan from a napkin.

Take a napkin. Fold it in half. Lay out again and connect with the fold. Turn the napkin over and press it in half with your fingers. Fold in the corner for the neck and fold it in half again. Then slightly pull back the bird's neck. Correct and straighten your head. Fluff the ponytail, gradually lifting the layers of the product. You will get a beautiful swan made from an ordinary paper napkin.

Now you know how to make a paper swan with your own hands. It's simple, fun and educational.

How to make a swan from towels?

You can surprise and make a good impression on your loved one by making a creative swan from a towel. What is needed for this? Take a large bath towel. Fold its ends into a triangle (bring from one side and the other to the middle of the product). Then we wrap one side and the other into two tubes. Let's put them together. We lift up the upper half of the two tubes and form a neck and head from it. Next, carefully fluff the swan’s tail and body. The product is ready.

You can make a couple of such swans. Then move them closer together and gently bend the beaks into a heart shape. The original decorative element for a secluded romantic evening is ready.

How to make a modular swan out of paper?

If you have already learned how to make simple paper shapes, then it’s time to try your hand at creating something more complex. For example, a modular origami figurine is perfect for this. What is needed for this?

Coated multi-colored or office white paper is best. In order to make a swan, we will need many small triangular modules. Below we will tell you how to make a paper swan with your own hands.

Creating triangular modules

When making a module, take a small sheet of paper, 7x5 cm in size, and bend it in half once and twice. Then we unbend the sheet of paper, take the two lower ends and lead it to the middle, creating two triangles.

We turn the leaf over, bend two triangles on the resulting tail, and hide the excess. The result is a triangle-module completely closed on all sides. It is from such details that we will make paper swans. It is more convenient to make such triangular elements with your own hands, following the diagram.

To ensure that the figures are the same size, you can do the following:

• take a landscape sheet, a ruler and a pencil;
• draw out the empty field of the sheet so that you get equal squares with a size of 53x74 mm;
• cut out the resulting rectangles;
• Make a triangle shape out of each one.

And finally, all you have to do is collect all the elements into one.

How to connect elements correctly?

In order for the product to look aesthetically pleasing and be securely fixed, it is necessary to correctly connect all the small parts of this unique volumetric mosaic.

If you follow these simple rules, you will get beautiful and graceful paper swans. You can make a spectacular swan in classic white color with your own hands or use several colors of the rainbow in one craft at the same time. For example, to create a bright swan you will need:

• red triangle for beak;
• 136 pieces of pink triangles;
• 90 pieces of orange triangles;
• 60 pieces of yellow parts;
• 39 pieces of blue elements;
• 78 pieces of green parts;
• 36 pieces of blue triangles;
• 19 pieces of purple parts.

So, to connect the elements, start small. Take three parts: two of them should touch each other with their walls, and the third should fix them in its two inner pockets. This is how you make paper swans with your own hands.

At the next stage, take the remaining parts and lay out a circle according to a similar pattern. In total, it will take you up to 30 small elements to create one circle. Moreover, in each of the subsequent circles there will also be 30 triangles of the same color.

Thus, we will make circle after circle, and in the end we will get a colorful paper swan. It is better to try to make origami with your own hands after first studying specialized literature.

Turning the part inside out

When we have the fourth and fifth rows ready, all that remains is to carefully pull the ends of the large volumetric part that has a round shape, trying to turn it inside out. With the right movement, you will get a beautiful vase that visually resembles a football stadium.

DIY paper swan: master class (forming wings)

Next, we make the sixth and seventh row from the received elements. And at the same moment we create a blank for future wings. To do this, two small gaps should be left in the seventh row by carefully selecting unnecessary parts. It is because of this that in the seventh row there will be not 30, but 24 triangles.

At the next stage, we make a new and subsequent rows, each time eliminating two modules (triangles) from them. Therefore, the eighth row will have 22 elements, the ninth - 20, the tenth - 18, the eleventh - 16, etc. The tail is also made using the tactic of reducing one triangle in each row. This is exactly how you create a paper swan with your own hands. We will tell you later how to make the beak and neck for it.

Making the beak and neck of a swan

The next step is to connect together the elements for the head and neck of the bird. Unlike the previous method, this time the two corners of one triangle should be inserted into both pockets of the other. Moreover, if you do not want to see your swan with a forked beak, both parts of the module can be glued together with regular PVA. Next, give the bird's neck a suitable bend and shape, and then secure it exactly between the wings.

What to add to the finished product?

Additionally, the product can be decorated with ready-made doll eyes and a bow. In addition, for greater clarity and beauty, you need to put your swan on a pedestal. To do this, separately make two circles consisting of 36-40 triangles. In this case, the modules for the stand should be made according to the same principle as we previously made the neck.

If you follow our tips, you will get a beautiful paper swan. With your own hands (photo of the product is attached) you can make a three-dimensional origami figurine, which you can give as a gift or simply use as a bright decoration for your interior.

How to combine colors when working on a product?

When making a swan, try to follow the pattern and combine the colors correctly. They must be combined and harmoniously fit into the overall picture of the product. For example, the sequence of colors could be as follows:

• the first and second row are pink triangles;
• third, fourth and fifth row - orange details;
• sixth and seventh row - yellow triangles;
• the eighth, ninth and tenth are green modules;
• the eleventh and twelfth are blue triangles;
• thirteenth, fourteenth and fifteenth - blue details;
• the sixteenth, seventeenth and eighteenth are purple triangles.

Make the tail from twelve green elements and three blue elements. For the neck, use one red, seven purple, six blue, green and yellow elements. This way you will get a colored paper swan. You can make it with your own hands (the diagram is shown below) of any size. The color scheme can always be changed if necessary.

In a word, if you want to make a beautiful decorative element, you can always remember MK about swans. And you can make them from paper, napkins, postcards and even bath towels.

The classic origami technique is the folding of various paper crafts without the use of scissors and glue. In addition to the classical technique, other types of work with paper have become widespread. One of the most popular is folding three-dimensional figures using numerous paper modules. Modular origami swan is a prime example of what beautiful figures are created using triangular parts.

Bright three-dimensional models attract everyone's attention. It seems that creating such works requires special knowledge and skills. However, even a novice amateur can assemble such a craft. It is worth carefully studying master classes on this technique and following the recommendations of experienced masters. Crafts made using this technique require, first of all, attentiveness, perseverance and painstakingness.

Module and types of its connection

Each master has his own designer. This construction set includes disassembled elements of old or unsuccessful figures. Triangular parts for new work are also assembled in advance. To create modules, colored or white A4 paper is used.

The sheet is divided into 2, 4, 8, 16 or 32 equal parts. Most often, paper is cut into 16 or 32 pieces. For children, to make it more convenient and easier for them to assemble the craft, the paper sheet can be cut into 4 or 8 parts.

To make 16 identical rectangles, the paper sheet is divided into 4 equal parts in width and length. For 32 rectangles, the sheet is divided in width into 4 and length into 8 parts.

Triangles are assembled from such rectangles to create three-dimensional paper figures.

To create a module, you need:

1. Fold the rectangular sheet in half. Fold the resulting rectangle in half again and straighten it. This outlines the two main folds of the workpiece.
2. The edges of the rectangle are bent towards the midline. The figure turns over.
3. The bottom edge rises. The corners on the left and right bend along the line of the large triangle.
4. Unbend the lower part.
5. Along the marked lines, small triangles are folded from below. The edges are raised.
6. The resulting triangle is bent in half. The result is a module with two pockets and two corners.

Triangles can be attached to each other in three ways:

• Connected by long sides.
• The connection goes through the short sides.
• One module on the short side, two on the long side.

Which exact assembly method is used is usually indicated in the instructions for the circuit.

For newbies

Beginners will definitely need detailed step-by-step instructions for assembling a paper swan using the modular origami technique. Such instructions and step-by-step explanations can be seen in video master classes by recognized origami experts.

There are many groups that share a love for this type of creativity, and where you can get advice on how to make an origami swan from modules with your own hands.

For beginners, specialized stores offer a huge number of kits for working in the modular origami technique - swan figurines and step-by-step assembly diagrams.

Before you start assembling such an elegant figure as the modular origami of a beautiful double swan, you should practice on lighter models. Simple models can be assembled by a preschooler with the help of teachers in kindergartens or with the help of his mother.

The most tedious thing for a child is creating triangular modules. Fine motor skills have not yet developed properly, and the baby has difficulty assembling small parts. That is why for children's crafts it is better to assemble modules of large and medium sizes. Preschool children quickly get tired of monotonous, boring work, so the mother’s task is to help make blanks for crafts.

It is better to set aside a special time and day when all family members will work together to assemble an openwork air composition. The elements necessary to create a three-dimensional figure must be prepared in advance. The child will be interested in engaging in the creative process with his parents. Adults will be able to tell you how to assemble modular figures correctly.

An easy craft that does not require much time or pre-assembled materials to assemble is a figurine of a small swan. To create a modular origami “little swan” you need to make 70 triangular modules, 69 pink or blue elements and 1 red for the beak.

Let's look at the step-by-step assembly of a small swan.

Assembling the body. The basis is 3 rows of assembled elements. There are 12 triangular blanks in each row. The resulting strip is connected into a circle. It is necessary to give the resulting part the shape of a bowl.

First wing – 4 modules are put on. The following rows are in decreasing order: 3 triangles, then 2. The tip of the wing is two elements, placed one on top of the other.

Breast - immediately after the wing, 2 modules are put on. 1 piece is attached on top with the short side. The breast is ready.

Second wing. Immediately after the breast, the process of assembling the second wing begins. Both wings are assembled according to the same scheme: 4 parts, 3 elements on top, then 2 triangles. The tip of the wing is two rows of one triangle.

Tail. First row - 2 parts. 1 more piece is attached to the top.

Neck, beak. For the neck we connect 5 elements vertically, the 6th row is completed by a red triangle - the beak. Carefully give the neck a slight bend.

Connect the neck to the last breast module, which was assembled with the short side.

Assembling such a small figurine will not take more than 10 minutes. You can create a whole family of beautiful birds. To make it more convenient for a child to hold the modules in his hand, the parts can be made large. A child can make such a craft as a gift to his grandmother or mother. The size of the small swan can be changed by adding additional pieces.

Simple model

Once you have mastered the process of assembling a small craft, you can begin to work on a more voluminous and complex figure.

To create one model you will need 458 multi-colored modules and 1 red triangle for the beak. Fans of classic models choose black or white colors for crafts.

Let's look at the step-by-step creation of a modular origami swan from prepared elements. The presented model is of an average level of complexity and requires precision and care.

• A strip is assembled from 30 blanks and connected into a circle.
• We make 4 more circles in the same way.
• The resulting part must be carefully turned out. Make sure that the modules do not fall out and the workpiece does not crumble. The result is a figure shaped like a bowl. 2 more rows are attached to the top of the bowl.
• On the 8th row, the process of forming the wings begins. For the wings we attach 12 blanks, skipping 2 parts. The neck of the craft will be attached at the place of the pass. After the missing triangles, we reattach 12 parts. The remaining free area is the place to form the tail.
• The wings are made as follows. Starting from the 9th row, in each subsequent row the number of paper modules is reduced by 1. The wing is considered complete when 1 triangle remains.
• In the same way, reducing each row by 1 piece, the tail is made.
• The neck is made separately from 19 elements and 1 red triangle for the beak. The corners of one part are inserted into the pockets of another. Complete with a red triangle. The resulting part must be given a slight bend, similar to the position of the swan's neck.
• Attach the neck of the craft to the space left between the wings. The result was a paper swan using the modular origami technique.

The main element of this craft is a bowl-shaped body. This technique is used to create other figurines: vases, dragons, animal models and fairy-tale characters. Using the swan pattern as a basis, you can create a three-dimensional heart.

Having studied the assembly diagram of a modular origami swan, a beginner is already able to come up with and implement his creative idea.

Many experienced craftsmen are improving this type of craft and creatively rethinking the approach to classic model assembly. Thus, in the modular origami swan (the master class presents extraordinary models on the Internet), for example, the figurine is made in blue tones with an unusual wing shape.

This unusual craft can be made in the colors of the country’s flag.

Origami double swan

This type of craft is more complex. However, the double swan looks brighter and the figure is more voluminous. This is due to the fact that the model is assembled according to the matryoshka principle. Several smaller ones are hidden in one figurine.

Before you start creating such a masterpiece, prepare 1502 elements. To emphasize the unusual shape, add colored triangles. Then you will need:

• Colored blanks – 180 pcs.
• White – 1322 pcs.

Part one

Its assembly will take 770 modules.

• For the base, we assemble and connect 2 rows of 30 parts into a circle.
• Add 2 more rows. Carefully turn out the resulting part. The result is a figure similar to a bowl. We make 10 more lines on top. While working on the figure, constantly correct it. Give a slim look.
• We collect 15 rows in this way.
• On the 16th line we outline the places where the neck, wings, and tail will be formed. You will need:
• Neck – 6 elements.
• Wings - 10 pieces per wing.
• Tail – 4 elements.

We make the neck according to the following scheme:

• 6 modules: 1 pink, 4 white, 1 pink triangle.
• Each subsequent line is reduced by 1 piece until 2 triangles remain. The neck is ready.

We collect the tail opposite the neck. The tail starts with 4 pink elements and removes one from each line until 1 piece remains.

After completing the assembly of the tail, we move on to the wings. The formation of the left and right wings is the same.

• First row: 1 pink triangle, 8 white ones and 1 pink piece closes the wing.
• Second row: the last module from the tail side is put on the inside of the corner.
• The wings rise in 10 rows, each line has 10 elements. To control the height of the wings, they must be assembled at the same time.
• Starting from the 11th row, the wing elements are reduced by 1 piece. in each subsequent row. The decrease occurs among the white parts. The pink border remains in place.
• The wing is complete when there is 1 pink triangle left.

So, the main part of the double swan has been assembled. To prevent the created structure from falling and crumbling, make a stand of two rows. Strengthen the stand blanks with glue to make the craft stable.

Part two - inner wings

The base of the second part is made similarly to the first figure. Only 20 elements are collected in a circle. After 2 assembled rows, turn the craft blank inside out and add 5 more lines. Be sure to draw out the figure.

Each wing consists of 10 parts: 8 white in the center, 1 pink at the edges. Each wing rises by 3 stripes.

Starting from row 4, white elements are reduced by 1 pc. with each row until the pink triangle closes the line of the wing.

Part three

The beginning of the third part is similar to the two previous parts of the swan figure. There are 12 triangles at the base alone. The figure rises 6 rows and turns inside out. In the last line, 2 pink pieces are put on.

From the 7th row we reduce each row by 1 white triangle. The last part is ready.

The three assembled parts must be carefully and carefully inserted into one another.

Parts may fit tightly and cling. Slowly, slowly, move the base of the wider figure apart. After all the details of the future craft have been collected, start working on the neck.

Neck

For the neck, space was left for 6 modules, but it is better to assemble it from 4 or 3 parts in width. The length of the neck depends on the wishes of the master. To prevent the parts from falling apart when bending a long workpiece, it is recommended to place them on glue. A red beak ends the neck. You can optionally glue on drawn eyes or make them from buttons.

The craft itself can be decorated with a chain, bow or a string of jewelry. This figurine is both a beautiful interior decoration and an original handmade gift.

"The Swan Princess"

One of the most beautiful three-dimensional figures is the modular origami Swan Princess. It is in the creation of fairy-tale characters that masters and lovers of this type of creativity give free rein to their unbridled imagination.

The source of inspiration is the princess from the fairy tale of the same name. There are as many masters as there are models depicting the fairy-tale heroine. Some people create a princess figurine, however, most people like to create a fairy swan.

There are quite a lot of step-by-step ways to create this craft. For the base, you can take a classic model, add elegance to the craft by making a longer and curved neck, and decorate the head of the figurine with a crown.

Prepare the following modules:

• Green – 166 pcs.
• White – 615 pcs.
• Blue – 680 pcs.
• Yellow – 335 pcs.

Start working on this model by creating the tail. The base contains 30 parts. The colors of the triangles can be combined as desired or made according to the scheme.

After the blue petals are collected, the reduction of details begins from the top point of such a petal. 1 element is removed from each side of the leaf.

For a fluffy tail, you need to collect 1 large feather and 8 small feathers.

Small feathers are made in two colors, 4 pieces each:

• Vertically connect 5 elements, alternating 2 colors.
• Place 2 green triangles on 2 corners.
• In the center there are 2 yellow modules, and at the edges there is 1 green one.
• Next line: green, yellow, green, yellow, green.
• Green, 2 yellow, green. The outer parts are put on the inside of the lower module.
• The following lines are made in reduction in a similar way.
• The same feathers are made in a different color.

A large feather is assembled from two small ones, located vertically above each other.

The feathers are neatly attached to the tail. To prevent them from falling, it is recommended to put them on glue.

Assembly of the body

The base consists of 36 elements. There are 11 blue lines in a circle. From the 12th line, the breast of the craft begins to form. The coloring is collected from 2 stripes. The center of the wings is highlighted in yellow, the breasts are green, framed by white triangles.

On line 12-1, a breast is formed in the center: each row, 1 piece is removed.

Neck

Alternate elements in lines of 2 and 3 pieces. Height – 25 stripes.

For the wings, 7 parts are used on different sides, opposite each other. For each line, 1 element is also removed.

The tail is gathered in front of the breast. To create a ponytail, 11 elements are used, the number of which decreases with each strip.

The stand is made of two circles with 39 modules each.

It is better to attach the finished craft to a stand with glue so that you can move and rotate it without fear of it falling apart. The figures can be of different sizes - from a few centimeters high to one and a half meters or more. Large and tall crafts necessarily require additional strengthening of the composition.

Conclusion

Such masterpieces are real works of art that are available to everyone. For crafts using the modular origami technique, you only need colored paper, as well as the desire of a creative person to create and create something new with your own hands. It is useful to accustom children to this type of creativity. Children develop spatial imagination and creativity.

In this lesson you will learn what modular origami is and will be presented with an assembly diagram for a double swan, which you can assemble with your own hands.

Modular origami – Double Swan

Is it possible to make a memorable one without spending a significant amount of money or without having any special skills? Many will say no. But the master class presented in this article once again confirms the truth of life: nothing is impossible! With it, you can make a truly wonderful and wonderful gift with your own hands. And not just a gift, but a real small masterpiece that will take its rightful place in the house of the future owner and will leave this day in the memory for a long time.

All you need for this is a small stack of sheets of ordinary paper in the popular A4 format and patience, with the latter component being the determining factor. But, let's talk about everything in order.

So, as has already become known, our gift will be a paper swan. But how to make it, and using what technology, you ask? And everything is very simple. It will have to be assembled from small components - modules, and this technology is called “modular origami”.

Modular origami- a fascinating way of creating, which first appeared in China, and is based on assembling various figures from a large number of identical parts (modules). Modules come in different types, but usually the classic version is used (as in our case) - triangular. They are made according to certain rules that allow them to be connected by nesting one into the other. The resulting frictional force prevents the modules from falling apart, making the overall structure strong, and, at the same time, flexible and elastic.

To get a classic triangular module, you need to cut an A4 sheet into 32 equal parts. This can be done by methodically bending the sheet in half and cutting it along the fold line with a stationery or any other sharply sharpened knife. Now that the “material” for the origami module is ready, we begin its actual production. You can see this process in detail here:

Now that we’ve figured out how to make the modules, let’s proceed directly to making the paper swan itself. Here's what the finished figure looks like:

And here’s what the material it will consist of looks like:

Yes, it’s not for nothing that we mentioned patience at the beginning of the article. To make such a large pile of modules you will need quite a bit of it. But at the same time, it is not necessary to make all origami modules at once. You can stretch the process over several days or weeks. And if you have family and friends who are ready to help, invite them to work for a common cause. After all, working together is much more effective. In addition, such an activity will even be useful for children, since it develops certain skills, perseverance and hand motor skills. Turn the process of creating modules into a fun game and the time will fly by!

As you can see, to create a swan you will need a total of 1502 modules. If you want to make it white, they will all be made of white paper. But you can experiment with color. For example, in the swan shown in the master class, 1322 white and 180 pink modules were used.

Well, if you have finally decided on the feat and have completed 1502 modules, you can start the fun part! We begin the process of assembling origami from paper modules. Let's break it down into several successive stages.

1. Connect 2 modules in this way:

3. We continue to add rows of modules. Made 5 rows.

4. Made 10 rows. In the process, we bend the workpiece slightly inward, giving our base a more slender appearance.

5. Add 5 more rows and stop, continuing to bend and stretch the workpiece, so that later our swan will be slender and well-fed.

6. Now that 15 rows have been assembled, let's start creating the neck, tail and wings. It will take 6 modules for the neck, 4 for the tail, and 10 for the wings. Let's start with the neck.

7. Assembled the neck.

8. We begin to collect the ponytail exactly opposite the neck.

9. Let's move on to the wings. The first row of each wing consists of 10 modules.

10. We begin to make the second row. Here, from the tail side, you need to put on the module as shown in the figure below.

11. We continue to dress the modules in the same way, spending 10 pieces on each row.

12. Gradually raise the wings of our swan to 10 rows. We make both wings at the same time, making sure that the height of each row is at approximately the same level.

13. When raised by 10 rows, for each subsequent one we spend 1 module less.

14. The result should be a product like this, consisting of 770 modules. The lion's share of the work has been done, for which we congratulate you.

15. For the stability of the structure, we will make a stand. We place the modules on glue, and we try to do it evenly, so that our swan can subsequently stand firmly on its “legs”.

16. When the first row is dry, glue the second one.

17. Let's move on to the second component of our gift - the inner wings. We begin to follow a similar scenario, only there will now be 20 modules in a row.

18. We make 7 rows, pulling the workpiece in parallel.

19. We begin to raise our wings. We will allocate 10 modules for each.

20. Raise by 3 rows, as shown in the figure.

21. After this, we begin to reduce each subsequent row by 1 module.

22. The end result is inner wings like these!

23. We begin work on the third component. The scheme is the same, but there are now 12 modules in a row.

24. Raised 6 rows.

25. In the 7th row we use 1 module less, thereby dividing it into two parts, and after that we reduce each subsequent row by 1 module.

26. The final insert is ready!

27. Now that all the components are done, let's start putting them together.

28. If the inner wings are difficult to insert, insert them slowly, gradually expanding the seat at the base.

29. The third insert may also not fit smoothly, push it in gradually. If that doesn't work, you can put it on glue.

30. With a neck, you have a lot of wiggle room. We recommend starting to assemble it with 3 or 4 modules. Their number here may differ - you yourself choose the degree of cervical bend. You can also put the first few “base” rows on glue to prevent the possibility of this part breaking off.

OK it's all over Now! The swan is ready!

If desired, you can decorate it. But you shouldn’t be too zealous in this matter. A few ribbons, a bow and a minimum of other decorations. Although even without all this, your swan will look great, believe me!

Give your loved ones good gifts. And what could be better than handmade work, which has always been valued and will be valued the most? After all, after all, a piece of your soul and efforts is invested in it!

No less interesting articles:

And here is a video on this topic:

This is one of the simplest paper triangle swan designs. To create such a swan, we will need 458 white modules and one red (or orange) for the beak. How to make a triangular module>>

So let's get started. Let's start making the first two rows. We take three modules and arrange them this way

We insert the corners of two modules into the pockets of the third

We take two more modules and connect them to the resulting structure

Then, in the same way, we connect two more modules... and we understand that the structure is frail and begins to fall apart in the hands with every careless movement. Don’t be upset, in order for it all to hold tighter, we will immediately assemble three rows

To do this, take the module and place it like this

And we repeat the trick of inserting corners into pockets

In this way we collect three rows. Each row consists of 30 modules. And we close them in a circle.

Now we take the resulting skirt with both hands on the left and right, with our thumbs we gently press the middle, turning the product inside out

Instead of a skirt we get a saucer

We carefully bend the edges up giving the product this shape:

Side view

Bottom view

From the seventh row we begin to make wings. In the same way as in the previous rows we put on 12 modules. Then we skip two corners (from two adjacent modules) and put on another 12 modules. In the missing place with two corners there will be a neck, and in a wider area there will be a tail.

In the next row we reduce each wing by one module. Accordingly, each wing of the eighth row will have 11 modules

Side view

So we reduce each row of wings by one module until there is only one left (as we lay out the wings, we bend them slightly, giving the desired shape)

we turn the swan back towards us and make a tail (also according to the principle of decreasing by one module in each row)

All that remains is to make the neck and head of the swan. For it we need 19 white and one red module. In red, it is better to glue the corners in advance so that the swan’s beak is not forked. The neck is assembled a little differently. We take two modules and arrange them like this

We insert the corners of one into the pockets of the second

and we’ll assemble all the rest in the same way, bending them in the right way during assembly

Now carefully place the neck on the remaining two corners. The swan is ready.

The swan is a beautiful and noble bird, with which many legends and tales are associated. A symbol of immaculate beauty, purity and inspiration. The house was often decorated with the image of this bird, in the hope of attracting love, wealth and family happiness. Using the origami technique, you can create a swan figure with your own hands at home. Thanks to its unique appearance, an origami paper swan will harmoniously fit into the interior of your apartment or serve as an unforgettable gift.

There are many ways to make an origami paper swan. They all differ in complexity, the amount of material used or the appearance of the finished product. Tables at weddings and birthdays are served with simple figurines of birds made from napkins. Many simple options can be made with children in kindergarten classes or during labor lessons in the classroom. Children enjoy making products in the form of cranes and peacocks. Crafts made using modules will be labor-intensive, but beautiful.

In this version of paper origami, a swan, the step-by-step assembly of which requires painstaking work, will look impressive and unique.

You can read about how to make a swan from origami paper in this article. In it you will familiarize yourself with detailed instructions and work diagrams.

Option for the little ones

Parents can make such a figurine for their child to visualize animals. It is also suitable as a Christmas tree decoration or a decorative element for scrapbooking.

This craft is suitable for younger children or those just starting to practice this hobby.

Materials:

• A sheet of paper in the shape of a square (you can use white stickers).
• Scissors.
• Black and red pencils.
• Glue or stapler.

Instructions:

1. Fold the sheet in half diagonally.
2. Using scissors, make small cuts along two sides of the resulting triangle. This will create "feathers".
3. Draw a line for the neck and head along the long base and cut along it symmetrically.
4. We unfold the workpiece, connect the upper and lower corners, fix them with glue or a stapler, leaving the head free.
5. We draw eyes and a beak on the head - the bird is ready.

There are many more types of paper origami swan, including patterns for beginners. Many step-by-step instructions describe the process of making paper bird figures step by step.

You can find the option that suits you with pictures illustrating the entire manufacturing process. A detailed presentation and commentary on actions in video materials will help you understand the sequence and nuances of the model’s execution.

Origami swan from a napkin

You can create an origami swan not only from paper using step-by-step instructions. A neat swan figurine made from a napkin will help you decorate the table before a big celebration and impress your guests. This serving detail will not go unnoticed and will emphasize the triumph of the moment.

To make this you will need a medium sized square napkin.

Instructions:

• The napkin should lie in front of you with an angle down. Mark a vertical center line using a fold.
• Fold the corners towards the center line.
• Turn the workpiece over with the back side up, bend the corners to the center.
• Fold the top down so that the top corner touches the bottom.
• Fold half of the resulting angle upward again. This will be the bird's head.
• Give volume to the figure by bending it in half vertically. Gently align the neck and head using the same folds.
• Adjust the angle of your neck. You can slightly raise the inside of the wing, giving it additional contours.

The figurine is ready - place it on the table or plate.

Note. The napkin is a very soft material. She can't always keep her shape. Working with it requires special subtlety and accuracy. Therefore, it is recommended to practice on plain paper.

Swan created from modules

Modular origami is one of the most painstaking and meticulous activities. Origami from paper swan diagrams includes many nuances in the process of such creativity. Creating each individual detail can take a lot of time and effort, but the result is worth all the expectations. This model has smooth curves and flexible moving parts, such as the neck. A bird model in this design can be safely demonstrated as a real work of art.

Creation using this technique is only possible for craftsmen who know their craft, however, you can increase their number thanks to further instructions on how to make an origami paper swan using modules.

Note. The modules are strung on top of each other, which makes them hold their shape tightly, however, for greater stability in work, cardboard of different colors will serve.

Manufacturing of main parts

We will need a small piece measuring 7.4 by 5.3 cm (for a large craft). A regular office sheet needs to be divided into 4 equal rectangles (16).

If the size is smaller, the sheet should contain twice as many rectangles. Then the blanks will be 5.3 by 3.7 cm in size.

Creating a structural element:

• Place the rectangle like a landscape sheet. Fold in half horizontally.

Note. If the paper or cardboard is colored on one side, place it with the back side facing up.

• Mark the center line by folding the piece of paper vertically and straightening it out again.
• Fold the sides at the top corners toward the center. Turn it over.
• Bend the extreme corners of the protruding ends upward. Next, bend the remaining ends to the top.
• Fold the resulting triangle in half lengthwise.

You have a triangular modular blank. It is very important that each of them have the same amount of bonding to each other to create an even composition. It is also necessary to ensure that the parts fit on top of each other equally, otherwise the figure will be uneven and the parts will stick out.

Small buildable swan

Before creating a large model, you can practice by making a smaller version. Good for beginners. In this option, you will get your hands on the production of parts and their fastening. Follow the instructions “paper swan origami”, which shows step-by-step assembly of a small copy.

Instructions:

• For the base we will need 3 triangles: we press 2 of them against each other, and insert their corners into the pockets of the 3rd, which is located with the long side down.
• Take two more. Fasten them to the resulting workpiece in the same way, pressing the sides together, placing the corners in the pockets. In this way, you must attach another 40 parts (20 adjacent corners and 20 fastening them). As a result, you should end up with a circle consisting of 2 rows.
• Using 20 pieces, create the 3rd row, also putting modules on the corners. Repeat the procedure, creating the 4th, 5th rows using the same quantity.
• Bend the resulting circle inward. This will give you a stable base.
• Perform the 6th of 20 elements, pointing them slightly upward.
• We create wings. To do this, determine a couple of corners where the bird’s neck will be located. Attach the module to them for reference. Move 8 elements away from it in both directions - these are the bases for the wings.
• Make the rest of the formations, reducing the number of parts on each new one by ONE. As a result, you should have triangular-shaped wings.
• Making a ponytail. To do this, we attach 3 elements to the base, then, as in the wings, we reduce each subsequent row by 1 element.
• Modeling the head. To do this, we use 16 elements, which we string on top of each other in the previously marked place on the base. With each new element we gradually “bend” our neck. The last detail should be red - this is the beak of our bird.
• Adjust the shape of the wings by slightly bending them outward. You can glue small bead eyes onto the bird's head.

Our little bird is ready. The height of such a work is approximately 20 cm, using large parts.

Volumetric swan from 3 parts

Unlike the previous version, this specimen has more lush, expressive parts, such as, for example, double wings. Due to the large number of elements and the sequence of their connection, paper swan origami requires step-by-step adherence to the fastening of the elements.

To make a large copy, you will need 1502 parts, of which 1322 are white and 180 of any other color. The creation process involves 3 separate designs.

This is covered in detail in the following guide.

Instructions:

• Make a blank of 3 modules, as in the first case.
• Now create 2 rows of 30 pieces.
• Add 5 more in the same order. The number of elements in each of them is stored.
• After creating the 10th, we bend the disk inward, slightly stretching the volume of the future body.
• We continue to add along a new line, up to the 15th. We gradually create a three-dimensional body.
• The base is ready. Now we form the neck. To do this, we create a system of 6 modules: we attach the first to the last in a different color, doing the same in the next rows of the neck. We rise, reducing the number by 1 in each subsequent one.
• Opposite the neck we collect the tail using the same technique. Only now we have in the initial system not 6, but 4 parts.
• We measure out the wings. Each wing has 10 initial elements.
• From the 2nd order, we make the first and subsequent elements a different color. In this order, we create the height of the wings at 10 lines.

Note. Make sure that the height of each line is the same. Otherwise, you may end up with asymmetrical wings.

• After the 10th build, we begin to reduce the quantity in each subsequent one by 1 part. Don't forget to frame the first and last details with color.
• Carefully bend the wings. In the end, we got the main part.
• To ensure that the product stands firmly, we create a stand. To do this, use glue to secure the modules at the base of the body. After the 1st amount has dried, apply the 2nd.

2 design:

• We begin to create the internal part in the same way as the main one, but we now have 20 elements in the set.
• Step by step we build 7 rows. We try to stretch the body a little.
• After the 7th we make wings: 10 parts each. The edges of each line are indicated by a different color.
• After 3 lines, reduce each subsequent one by 1 detail.
• As a result, we should have inner elongated wings.

3rd design:

• The technique for creating the base is the same. Now there are 12 parts each.
• Create a height of 6 modules. Turn the base side down.
• From the 7th row we attach 6 elements of a different color, use 1 less element, dividing the body into 2 parts.
• The central part is ready.

• All that remains is to put all the details together. Carefully fit the inner wings into the main part, widening it slightly. Take your time to avoid damaging the case.
• Also insert a small insert into the middle part. If possible, secure it with glue.
• Before creating the neck, it is recommended to coat the initial rows with glue, since this part is very long. To create, you can use 3-4 parts at the base and continue their height in the same quantity, right up to the head. Fix the penultimate corner with black, and the last with red. This will create an edge around the beak.