Decorating a wedding with balloons - ideas with a photo. Balloon heart, or six ways to confess your love

A wedding is a holiday that requires a lot of time to prepare, so it is important not to miss a single detail. Decoration of the hall and the wedding cortege is a prerequisite for such a celebration. The heart for a wedding is the most important figure, and you can use it to decorate the hall, the car, and the festive dessert.

balloon heart

With the help of ordinary balloons, it is easy to turn an ordinary atmosphere into a festive one. In addition, it is easy to make decorations from balls with your own hands. The most popular balloon shape for wedding celebrations is the heart. It can decorate a banquet hall, a room for a newlywed couple or a car.

There are two main options for how to make a heart from balloons: with and without a frame. It is quite simple to make a frameless heart, but such a figure will not be very stable. But if you use the option using the frame, you can even make two hearts next to each other.

What you need to make:

Balloons (plain or multi-colored) - 150-200 pieces;
Steel or aluminum wire 3 meters long. The heart will be 1 meter high;
A device for inflating balloons;
Pliers, thread and tape.

First you need to make a heart shape out of wire. Connect the ends with tape to make a whole figure.

Blow up the balls. Of course, with the help of lungs it is difficult to do this with so many balls, so you will need at least a hand pump to help. It is important to ensure that the balls are the same size, otherwise the figure will “float” and be ugly. Tie each ball tightly with a thread to prevent deflation.

Fasten two balls between each other, and two more of the same balls. Then cross these two pairs with each other. You will get such a composition of four balls. Make such compositions from all the remaining balls.

Then you should tightly wind the fours of balls onto the wire, starting from the top. Make sure that the balls sit tightly on the frame. The wire should not be visible. If all the balls are of the same tone, then the process will be fast, and if there are two or more colors, then you will need to take the time to distribute them correctly.

At the lowest corner of the heart, you need to screw not four, but two balls. Everything, the figure is ready!

Flowers heart

Another popular element of wedding decor is a heart made of fresh flowers. It is not necessary to purchase it, it is quite an expensive acquisition. Everything can be done by hand, there is no particular difficulty in this.

In order to make a heart of flowers, you need to take:

Roses - most often use burgundy or red;
Special floral sponge;
Wire.

First you need to give the sponge a heart shape with scissors and a clerical knife. Then moisten it abundantly with water for flowers.

When the sponge becomes soft, take a rose, cut off the stem so that its length from the flower remains about 8-10 cm. Do this with all the flowers. Then stick them into the sponge at such a distance from each other that the sponge itself is not visible.

When everything is ready, take the leaves left from the roses and use a wire to attach them around the entire perimeter of the sponge in an even layer.

That's all, a minimum of effort, and the heart of flowers is ready.

burning heart

According to tradition, the wedding event often ends with some beautiful spectacle. For example, Chinese lanterns are released into the sky, or I launch fireworks. The most original couples choose a fiery heart to conclude the holiday.

Burning hearts to romantic music will leave any guests indifferent and will definitely be remembered for a long time. A photographer can capture a young couple in a fiery frame.

Such entertainment does not cost fabulous money, the price starts from about one and a half thousand rubles. It all depends on what size the figure will be, and how long it will burn. Before ordering such a fire show, you should make sure that there is a safe area near the banquet hall or restaurant where the wedding will take place. Since there are certain requirements for the use of figures from fire according to the rules of fire safety.

What a fiery heart looks like is shown in the photo.

Heart shaped cake

Ordinary round-shaped cakes are a thing of the past, now cakes in the form of various shapes are in fashion. For a wedding, of course, most often they order a cake in the shape of a heart. The heart can be either one or two.

To create a dessert in the shape of two loving hearts, you need to bake two blanks and fasten them together with cream. The decor can be made from fruits and berries, cut them beautifully using the carving technique. Decorate with white air cream, mastic details. In the center of the figure, you can put the figure of the newlyweds or two rings fastened together.

heart on the car

Decoration of a wedding car is almost the most important attribute in a wedding procession. Most often, cars are decorated with ribbons, flowers.

It is very easy to make a heart that can be attached in front of the car. To do this, you need wire, a light fabric such as organza, artificial flowers and glue.

From the wire, form a heart of a suitable size, wrap it with organza. The frame should turn out to be quite voluminous, so that the fabric will take at least 3 meters. Glue the flowers to the base and that's it, the decoration on the wedding car is ready.

Video selection:

The heart is a very fashionable composition consisting of balloons.

If you want to make a heart that is 70cm high you need 100 balloons and for a 1.7m height you need 200 balloons. For this you will need:

Large balls for the chain on both sides, which have two tails (for inflation - at the bottom, for attaching the next ball - at the top);
- smaller balls for decorating the lintels of the garlands themselves;
- ribbons and foil.
Buy balls of different colors that will harmoniously complement each other.
Before starting work, you should know that each ball has a hole with which it is inflated. Hereafter it will be called "tail".

1. We carry out the basis - the load for the heart in case to prevent its flight. Pour water into the bowl. We tie the ball and put it up with a tail in the middle of the round foil for flowers and begin to collect foil around the tail, without covering it, smooth the edges of the foil. To make such a bouquet lush, apply a couple of layers of foil. It must be chosen with a pattern so that the whole bouquet looks elegant.
2. We begin to inflate a large balloon, tie it strictly tail to tail, and we already connect them without a thread. You need to practice in such a difficult matter. But if everything works out for you, then the work will go much faster, it will not take much time and effort. Then we inflate a large balloon and tie it to the previous balloon with the upper tail.

Then we inflate and form a chain of balls. The number of balls directly depends on the total size of the heart, only it must be strictly even, so that later you can easily give the desired shape. We tie the last large ball again to the tail.
3. We begin to inflate small balls, and connect them together by the tails. We blow two more balls and tie them. Take two bundles of 2 balls in your hands, combine them in the center and begin to twist two balls together from different bundles to form one strong of 4 balls. It is necessary to create as many fours as there are jumpers from the tails between the balls, then we connect the necessary places by screwing small balls around large ones, thus securing the structure.

4. When you have created a chain, decorated it with small balls, create a heart out of it. Decorate the very connection of the two halves of the heart with an ornament that you create from foil and small balls or a bow.

5. We connect the heart with adhesive tape, traces of it must be washed off with kerosene after the celebration. This is a tool that can dissolve any adhesive tape. Decorate the composition with flowers and sparkles.

Perhaps your friends, whom you will attract to do such an interesting thing, will do everything quickly and beautifully. For work, 2-3 people are needed, who clearly indicate all the duties. In this case, the work process will go faster, you will create a real masterpiece.

Modeling balls are an excellent material for creating various figures for the holidays. Hearts made in this technique look especially impressive. They are most often used at weddings and similar events. Making a beautiful heart yourself is not difficult at all. And this video will help in this by creating various options for such hearts.

Valentine's Day fits under the symbol of hearts, but how else?! Hearts can be made from anything, including balloons. A similar thing can be fixed not on the wall above the bed. DIY balloon heart It turned out to be not so difficult to do, but for work you will need:

insulated wire,
air balloons,
ball pump

The work will proceed according to the following scheme

from the wire we form the frame of our heart (you determine the size yourself). The place where the ends of the frame are connected should be carefully rewound with tape;
using a pump to inflate balloons;
inflated balls up to 12 cm in volume are twisted together in the amount of two pieces;
we fasten pairs of balls in 4 pieces;

5-6. we attach blocks of balls to the frame, as if we pass the block through the wire and turn any two balls together to fix the block on the frame;

completely fill the frame with balls;
We fix the finished heart in the right place.

It turns out the simplest heart

To make the composition look more cheerful and festive, you can add flowers, ribbons and other accessories between the balls.

There are a lot of options on how to make a heart out of balloons. There are both very simple and more complex ways. It is probably better to see several examples of weaving such designs once, evaluate your strengths and choose the most suitable option. In this video you can see instructions on how to make a heart from balloons on a frame:

And this video shows a variant of a heart made of balloons without a frame:

Video instruction on weaving a 3D heart (volumetric):

And one more video, a variant of making a double heart:

From balls for modeling (SHDM) you can make such a furry heart, it is better to use several shades and two sizes, in this heart red, pink, light pink and sizes 350Q and 260Q, if the frame is smaller, then the balls are taken 160Q and 260Q.

make a wire frame
inflate the balls 260Q (20 cm long), we connect from the beginning in pairs, and then into a quarter, which we place already on the frame to fix it - for this we twist two balls together,
we do the same with 350Q balls and wrap the quarter next to 260Q balls,

And we repeat everything until we fill the entire frame, you need to wrap close to each other so that the frame is not visible.

You can make several flowers from balloons and attach them to the heart with uninflated ends from 260Q balloons.

BALLOON HEART

To make a beautiful balloon heart, we need long red balloons. You can inflate such balloons yourself, but it is faster and better to use a pump. We inflate the balloons and begin to twist them. This process is called twisting. We twist a flower from one ball.

We twist a lot of such flowers - the more flowers, the larger the heart. And then we connect the flowers (you can pull them together with threads) into the shape we need.

You can also do it in a simple way - we twist long balls into sausages. And give the shape of a heart

Balloon hearts are very beautiful. At first glance, it may seem that doing them is very difficult, but in reality it is not so :)

This video tutorial explains everything in detail :)

In order to weave a heart out of a balloon you need to take eight inflated balls of sausages (four of different colors). Then they need to be connected in pairs:

Now the resulting four balls need to be twisted as follows:

Then they need to be dissolved and then stripes will be obtained, which will be a guideline, both on red and black balls (the author of the master class points to these strips with his finger), and then you should twist the balls like this:

Now we begin to gently twist the balls (you need to act very carefully, otherwise the ball can easily burst):

Then we level the bubbles in the loops and get wicker heart from SHDM:

Now we hang the finished airy heart on the wall and prepare a romantic dinner.

On Valentine's Day, I really want to surprise my beloved with something very original, not standard.

For example, arrange a romantic candlelit dinner in a beautifully decorated room with your own hands.

I think the other half will like it very much.

A heart made of balloons will please and assure you of your love and tenderness.

This video will tell you how to make it. A very original heart is obtained.

And most importantly, making this cute heart is not at all difficult.

The balloon heart is woven from 2 garlands, which are woven in a special order.

First, fold the balls into fours, then put the fours on top of each other and connect with a fishing line.

The garland is made like this. Two inflated balls are tied and two more inflated balls are tied by tails. Connect, interlace four balls with a cross.

We impose one four on another with a slight shift so that each next ball falls into the recess between the balls in the previous four.
We connect the fragments with a fishing line, we wind them in the middle, pulling them together as much as possible so that the garland is dense. But be careful not to damage the balls.

It will turn out more beautifully from colored balls, how to do the same with colored balls, see here.

Watch the video, the video makes it easier

This is a video showing how to weave a heart out of chamomile balloons.

and this video will show how to weave a red heart out of balloons with white balloons intertwined.

Valentine's Day is just around the corner. You won’t surprise anyone with flowers and sweets now, but a heart made of balloons pleases and will pleasantly surprise anyone. Making such a heart with your own hands will not be particularly difficult. Enough to stock up on red balloons and patience. A video with detailed instructions will help you.

Good luck and pleasant impressions!

The heart is a very fashionable composition consisting of balloons.

If you want to make a heart that is 70cm high you need 100 balloons and for a 1.7m height you need 200 balloons. For this you will need:

Thanks to the imagination and skills of creative people, the process of decorating festive events is constantly being improved. On sale now there is everything that is necessary for decorating the premises.

The most relevant option for a celebration is decoration with balloons - it always creates a festive mood. The advantage here is that you can create a unique composition from the balls, decorate the ceiling, tables, walls, etc.

Those who have not personally encountered the process of choosing balloons most often do not even realize that they differ greatly from each other in composition, appearance and a number of other features. The main criterion for choosing balls for should be the quality of the product.

Ordinary balloons

The term "regular" refers to balloons made from latex. They are inexpensive, but at the same time they are not inferior in quality and relevance of application.

It is enough to scatter them on the floor - and they will already decorate the room. You can also make chains from balloons or and fix them over tables or in another suitable place.

Often these balls are used to decorate a wedding cortege. In this case, you can use both small plain balls, and large ones with a pattern or inscription.

with helium

Helium-filled balloons are considered the most successful option for giving a chic look to the room. Helium is needed for the balloon to rise.

Balloons under the ceiling have gained wide popularity. It looks great: by combining different colors, you can create a unique and colorful picture.

For greater effect, you can tie spiral ribbons that will give the decor a special charm.

But if the ceilings are low, it is better to refuse such decoration, since visually the room will seem cramped.

Also located on the table or on the floor, "standing" balls will become the main decoration of the banquet hall. But, it is worth remembering that, placing such “bouquets” on the table, they are tied to a long ribbon so that the airy beauties do not block the view of the guests.

The number of balls in one bunch can vary from one to seven - more looks cumbersome.

To prevent helium balloons from rising up, they are attached to a weight, which can be the same balloon filled with a small amount of water.

foil

Original foil balloons are made of aluminum film, which visually resembles foil.

The originality of such a product lies in the fact that the shape differs from the standard oval.

As a rule, foil figurines are chosen for the wedding in the form of the first letters of the name of the bride and groom, hearts, rings, stars, etc.

The strength of such a ball is quite good, so you don’t have to worry about the reliability of the decoration. The special shine that is inherent in the "foil" will give the holiday a mood.

Modeling balls

The main feature of such balls is their shape - elongated, which is also called "sausage". Thanks to this, various figures can be modeled from them, which will decorate the festive celebration. They come in different sizes, this makes it possible to create aerial miracles.

Most often, flowers or whole flower arrangements are made from such long balls. To do this, they are bent and bandaged in the right places.

Panoramic

This type of balls looks rather unusual due to the fact that its front part is transparent, and a pattern is depicted on the inner back wall. This creates a panorama effect. Inflating method - only helium.

It is worth considering in advance how to properly place such an airy masterpiece so that all guests can admire it.

blowers

Self-inflating balloons will be a pleasant surprise for guests. They look like the most ordinary foil balls, only a stick is attached to the base in this case.

Inside there is a “magic” capsule, after pressing it, the inflation process begins without outside help.

LED

Diode balls will be a wonderful decoration for a wedding evening. In fact, this is an ordinary ball, on the inner wall of which an LED is fixed. The glow is distributed evenly, while the color depends on the shade of the ball.

The wedding atmosphere will be filled with romance and tenderness with such decorations.

Figures, swans, hearts, fountains, stands, balloon garlands

The balloon itself is already a holiday, and the air composition is a masterpiece. Talented craftsmen are able to create unique jewelry made of paper and latex material that will not leave anyone indifferent.

Figures that can be made for a wedding:

giant wedding rings;
bride and groom;
angels;
stroller.

And, of course, do not forget about the symbolic swans. “Inviting” the living to the wedding is not so easy, so you can make them airy.

If desired, they can even be made independently, the costs are small. Air hearts are the main attribute of a wedding, do not forget about them. Light ball fountains will give the atmosphere the right festive mood. The whole composition consists of balls "tearing" upwards, which have different heights.

Using air struts is a very original idea.

A wedding in a classic style will be complemented by them in the best possible way. Alternatively, you can place racks parallel to the edges of the table of the newlyweds.

It is impossible not to note the effect of air garlands. They give the festive atmosphere a special chic: by combining colors, you can achieve an incredibly beautiful design. Hanging around the hall, they will become one of the main decorations of the celebration.

How to decorate a photo zone, arch, walls, hall with balloons?

It is important that all participants of the wedding celebration have only positive memories.

Here you will see how you can decorate a wedding with balloons in an original way:

But over time, some details are forgotten, and in order to remember the wonderful moments, you need to open the wedding photo album. To make them bright and colorful, it is worth considering the design of the photo zone.

photo zone

The balloon photo zone for the wedding will be bright and extraordinary. It is important that the area reserved for the photo shoot be in the same style as the festive celebration.

Foil balloons with the first letters of the name of the newlyweds or with the word "love" look great on the photo. The bride and groom "bathing" in balloons is also an appropriate and fun option.

The giant balls look great. At the same time, at the end of the celebration, it would be nice to give each guest one balloon and organize a joint launch of them into the sky.

Arch

The balloon arch is a chic decoration. Made using two contrasting colors, it will complement the look of any celebration, especially a wedding.

Most often, the arch is placed above the table of the newlyweds and (or) at the entrance to the banquet hall.

The beauty of such a composition is incredible - with a good imagination of the master, you can create a real air miracle.

It is important that the composition of the balls does not look bulky. It will ruin the photo. There should be lightness, which is achieved by a moderate number of balls in the frame.

Wall

When decorating a room, pay attention to every detail. The walls should not differ from the general design solution.

For example, horizontal columns look great, symmetrically located around the perimeter of the hall. Attach them to the wall. You can also decorate the walls with air chains.

Hall

A decorated hall must have its own style, which you should rely on when choosing decor from balls. Despite the fact that balloons are beautiful and festive, if you place them incorrectly or lose a sense of proportion, you can ruin everything.

For decoration, it is best to use two primary colors. You should not randomly scatter and hang balls around the hall - it's cheap and tasteless.

How to make a heart out of balloons for a wedding with your own hands - a master class

Of course, the easiest way is to order an air composition from an experienced specialist. But why not do something yourself for such an important and personal event?

Lovers can try together and make a wedding composition in the shape of a heart using red balloons.

It will be very symbolic and touching. Moreover, in fact, the manufacturing process is not as complicated as it might seem at first glance.

For the heart, you will need approximately 2 packs of ordinary balloons, wire, tape, an inflation pump and fishing line.

We make a beautiful frame in the shape of a heart out of wire. The length of the wire is approximately 3 m. A little more is possible. Inflate the balloons so that their diameter is about 10 cm. Tie two balloons in pairs.

In a way called twisting, we connect two pairs of balls together, as a result we get four. Next, we continue to connect pairs of balls to each other. In general, it turns out somewhere around 40 of these "fours".

Now just string the balls on a flat frame. The material should fit snugly together without creating empty space.

We do this until the composition in the form of a heart is obtained. All that's left is to hang this beauty on the wall. To do this, you can make a loop of fishing line.

Such a decoration will become the main and most beautiful at the wedding, as it will be made with love. All those present will appreciate the man-made masterpiece.

The choice of the design of the banquet hall is an individual matter. But if preference is given to balloons, you can be sure that the festive atmosphere will be beautiful.

Thanks to this video, you can make your own heart from balloons for a wedding:

Despite the fact that balloon decoration is traditional and well-known, it never ceases to amaze. A rich color palette, a variety of shapes - all this pleases and delights. Once in such an airspace, we experience the feeling of a fairy tale. Are you ready to make your celebration fabulously airy??