Mouton fur coat: how to clean it at home, restore the former shine to the fur and store it properly. Cleaning a muton fur coat with shampoo foam is ideal

Mouton is a beautiful and fluffy short-haired fur, fur coats from it look quite dignified and stylish, while it is more affordable than mink or chinchilla. This is a great option for those who dream of a real fur coat, but do not have a big budget.

But often after storage, the fur becomes dull and matted, the product loses all its charm - how to clean a muton fur coat at home in this case? In this case, simple ventilation will not be enough.

Entrusting natural fur to dry cleaning is not the best and cheapest option. You will have to work a little on your own, so that with the onset of cold weather you can go out without embarrassment in a beautiful fur coat made of soft and shiny muton.

First, you need to remove all dust and small debris from the villi - do not hesitate, they are there, even if your Mouton fur coat was stored according to all the rules in a case and in a closet, and you regularly ventilated and shook it out. There are two ways to get rid of dust:

Vacuum cleaner. The nozzle changes to the softest for cleaning furniture, the weakest mode is turned on, and the fur coat is carefully processed from all sides.
Knockout. The fur coat needs to be laid out on an old clean sheet, moisten the other one in water and wring it out well. Cover the mouton coat with a damp cloth and go over it with a carpet beater.

Finally, shake the product several times and dry if necessary.

Deep cleaning of the muton

If, after removing the coat, the coat still does not look very fresh and tidy, carry out a more intensive cleaning. To get started, find suitable coat hangers - they should be exactly the right size, no more and no less, and strong enough to support the weight of the fur well. Then find a way to hang coat hangers over the tub and choose one of the detergents. It could be:

liquid washing powder;
liquid soap without dyes;
cleaner for carpets and upholstered furniture;
shampoo.

Any of the products is diluted in warm water and whipped into a dense, stable foam. It should be enough to completely process the entire product. Next, arm yourself with a perfect cleaning brush for clothes and apply foam to the mouton coat.

Remember that you can only apply foam, it is highly undesirable to wet the fur. After 5-7 minutes, treat the fur coat with a dry brush and take it out to the balcony to dry.

Tip: Mouton fur coat can be a variety of colors. But natural fur itself is light. Therefore, if you have a product of a dark shade, it is dyed anyway. This means that powders and products with bleaching components for cleaning the muton are contraindicated.

How to remove stains from a muton

Most often, you have to deal with slickness on the collar, pockets, cuffs, where a handbag is worn on the shoulder, or a belt is tied. On a light coat, they look like old greasy dirt. Single stains may also appear, for example, from spilled coffee, street dirt, lipstick or foundation.

All these contaminants can be removed both dry and wet.

Starch. This is the simplest and most affordable tool. First you need to prepare the workplace: spread an unnecessary sheet, bedspread or piece of oilcloth on a horizontal surface. Then lay a fur coat on it and sprinkle with starch. After that, a fur coat is sprayed over the starch with water from a spray bottle. With palms, the mixture is gently rubbed into the fur, after which the fur coat must be dried well in a natural way. Now it remains only to comb out the remnants of starch along with the dirt. In a similar way, talcum powder, semolina, rice ground on a coffee grinder, and bran can be used to clean a Mouton coat.
Petrol. If dry cleaning did not remove all the dirt, you can try to cope with it with refined gasoline. It is also good to remove single stains with this tool. It is used very simply: they simply moisten a swab in it and wipe the fur. You can then sprinkle it with starch and let it dry, then brush it well.
Hydrogen peroxide. A bottle of this remedy can be found in every home, and if not, you can buy it for a penny at the nearest pharmacy. To clean the muton, peroxide must be combined with water in equal amounts. Then the solution is applied to the product, and after drying, the fur coat must be carefully combed out with a stiff brush.

The safest thing is to spare no money and buy a special spray in the store for cleaning products made of suede, nubuck or velor. It is used very simply: a fur coat is hung on a hanger, the spray is evenly applied, and combed out after drying. Mouton care is not so difficult, it is unpretentious fur. And, nevertheless, many make gross mistakes and spoil products irrevocably.

What not to do

Despite the fact that everyone knows that natural fur, like leather, is not washed in a washing machine, many do it anyway. Well, perhaps after the first experiment nothing terrible will happen, and on the contrary, the fur coat will seem perfectly clean and fresh.

But be aware that you have already spoiled the structure of natural fur and its base. And he will not survive such treatment again - your beautiful and fluffy Mouton fur coat will turn into a sticky, untidy lump, which you no longer want to wear.

Therefore, if you are too lazy or have no time to bother with cleaning outer fur clothing, it is better to take it to a dry cleaner, which is also not desirable, but still better than dubious home experiments.

Under the beautiful and mysterious word "mouton" - sheep fur is hidden, which has undergone special processing with formalin. After that, the fur becomes shiny, silky, wear-resistant and resistant to water. Unlike mink products, muton fur coats and jackets easily endure wet weather with sleet and even light rain.

According to its characteristics, the muton is second only to otter fur coats. And the relatively low price makes products from the muton quite democratic. Mouton is used for products of various age groups. It can be children's coats, and men's jackets, and chic women's fur coats. Mouton products are also presented in a wide range of colors from white to black.

German furriers transformed ordinary sheepskin into such exquisite fur. In search of a cheaper material, they experimented with sheepskin and found a way to make this simple fur look elegant, thin, like a mink.

The main tool in this transformation is formalin, enveloping each villus, it makes the fur soft and shiny.

If you decide to buy a product from a muton, you need to know some secrets

If the sellers in the store tell you that the fur coat of well-known European manufacturers - they are simply lying to you. Mouton fur coats are currently produced only in Russia and China. The use of formalin in production is considered unhealthy, so Western companies stopped making fur coats from muton in the early seventies. On the market you can buy only vintage products from another manufacturer.
A high-quality muton fur coat that will last you a long time and will have all its positive qualities (wear resistance, moisture resistance) cannot be too light. Sheepskin is a heavy and rather coarse material and becomes thin only after chemical treatment and thinning of the mezra (leather part). But the thinner the mezdra, the lower its strength, the less durability.
When buying a fur coat or jacket, inspect the product from all sides. The lining of the fur coat on the bottom should not be sewn on. A manufacturer who is responsible for the quality of his products has nothing to hide. The seams should be palpable, but not too prominent. If the seam cannot be felt or it is absolutely flat, then the pieces of fur are glued together, and such a fur coat will not last long. The seams should look neat, with no threads sticking out of them.
Remember fur. A quality product will quickly straighten and take its shape. Gently pull the hairs; in a quality product, they should not fall out or break.
Do not forget to check the quality of the color of the product. Run a light cloth over the fur. If there are no traces of paint left on it, then everything is in order.
After a thorough examination, try on a fur coat. A good comfortable coat just won't want to take off. If you feel the slightest discomfort, then this is not your thing. Look for another.

In order not to regret the wasted money, it is better not to purchase a low-quality product.

If you are already the proud owner of a muton fur coat, then the question arises of how to care for it. Mouton fur coat is unpretentious. But still, a number of simple rules should be observed.

When purchasing a fur coat, immediately buy good wide wooden or plastic hangers. Perhaps they will give you along with a fur coat. The hangers must support the weight of the fur coat, be of the appropriate size so that the fur coat does not sag or deform.
Furs do not tolerate accessories. When putting on a fur coat, do not use belts, and carry a bag only in your hand. After all, even the most high-quality and wear-resistant fur under the influence of objects “rubbing” against its surface breaks and rubs.
Although the fur of the muton is quite moisture resistant, but after the product has been exposed to wet snow or rain, it must be thoroughly dried. The fur product should be dried in a vertical state, hung on a coat hanger and fastened with all buttons and fasteners. The air temperature should be at room temperature. The use of any heating devices is prohibited.
The appearance of fur (especially dyed) is negatively affected by direct sunlight.
If you drive a car, choose short fur coats. Sitting down on the seat, unbutton the buttons, and lift the floors of the fur coat. Do not use the seat heating function in a constant mode; from overheating, the core of any fur dries up and becomes brittle.
Due to the porous and fleecy structure, the fur retains various odors well. That is why, wearing a fur coat, you should avoid a long stay in a smoky room. It is also not recommended to apply perfume over a fur coat. Moreover, products containing various alcohols negatively affect the condition of the fur.

We clean a fur coat from a muton at home

With various pollution, a fur coat from a muton can be cleaned even at home. If the dirt is not cleaned with a brush, the fur can be washed with water, adding a little liquid detergent. Then the fur must be thoroughly dried.
If there is no visible contamination, loose products such as talc, starch and flour can be used for preventive cleaning. It's easy to use them. To do this, lay the fur product on a horizontal surface and sprinkle with the product you have. Then use a soft-bristled brush or hand to scrape off the applied powder. Shake off the product and comb it with a special brush intended for fur products.

If a fur coat from a muton has acquired an uneven color, you can tint it yourself. To do this, you can use high-quality hair dye of the appropriate tone. But it is better to entrust this procedure to professionals.

Before sending a fur coat for storage, the fur must be cleaned of dust. To do this, the fur coat can be shaken well or vacuumed with a soft brush at low power.

When folded, a fur coat from a muton (like any other fur product) should not be stored. The fur coat should be in a case in a vertical position. Choose a cover made of breathable fabric. The size of the cover should allow the fur coat to hang freely without hemming.

When sending a fur product to a permanent residence in a closet, make sure that there is enough space for it. Furs do not like contact with other things or objects.

In any case, the fur coat should be stored in a dark and cool place.

Any skin can not stand increased dryness. Therefore, maintain a comfortable humidity regime in the room where leather or fur products are stored - fifty to sixty percent.

Take care of moth prevention. Put insect repellant in canvas bags and rinse in pockets, cuffs and just in a case. Do not use aerosols. Their components can ruin the fur.

If the apartment does not have enough space or conditions for storing a muton fur coat, entrust it to the reliable hands of specialists. For the spring-summer-autumn period, a fur coat can be sent to a special storage, where ideal conditions will be created for it. In storage, the product is under careful control. It has optimal temperature and humidity conditions. If necessary, the product will be touched up or minor repairs will be made.

With proper storage and care, your muton fur coat will last for decades. Enjoy her appearance for as long as possible!

Mouton fur coats attract with practicality, elegance and convenience. But in the process of wearing, they can get dirty, especially models made of light fur. Dust and unsightly spots spoil the appearance of the product, deprive the fur of shine and beauty. The owner does not always have the opportunity to take the item to dry cleaning. How to clean a muton fur coat at home? This can be done in several ways, which we will tell you about.

Refreshing the look

The cold is coming, and we take our favorite fur coat out of the closet. Before putting it on, it is necessary to refresh the appearance of the product and restore the shine to the fur. It is not difficult to do this. Enough shake well outerwear or knock it out with a carpet cracker. But don't overdo it.

Another way to get rid of excess dust from a mouton coat is vacuuming. Turn on the device at minimum power. With gentle light movements, walk along the surface of the fur. Before cleaning, always make sure that the nozzle on the vacuum cleaner is clean.

Removing dirt and stains

If the fur has a light or white color, then you need to follow it with special care. Dirt and stains are best removed while they are fresh and not eaten deep into the pile. Sleeves, the area around the pockets and the collar are especially often affected. The most affordable way to deal with such troubles is a soapy solution.

Hang the product on hangers above the bath. Pour a little powder or rub laundry soap into a basin of warm water and thoroughly beat in the foam. Arm yourself with a clothes brush and gently apply the solution to contaminated areas. After cleaning, remove any remaining soap solution with clean water.

Dry cleaning

Cleaning the sleeves, hem and collar of a light muton fur coat at home requires a gentle approach and the use of safe but effective products.

First, cover the contaminated areas with starch.
Then spray it from a spray bottle with soapy water until a mushy mixture is formed. High octane aviation gasoline can be used instead of soapy water. But in this case, it is necessary to ensure good ventilation of the room.
Wait for it to dry completely.
Clean the fur with a brush and comb with a special fur comb.

You can use starch without soap solution.

Lay the fur coat on a horizontal surface and sprinkle it evenly with the powder.
Rub the starch into the pile of the product with smooth massage movements. Try not to wring or squeeze the fur too much.
After a while, you will notice the result of your efforts. The starch will turn gray.
Clean off the remaining powder and repeat the procedure a few more times.

Another remedy for removing stains and dirt is wheat bran.

Pour a bag of bran on a baking sheet and heat them in the oven to a temperature of 40-50 ° C.
Sprinkle over the surface of the fur coat. Pay special attention to the collar, pockets and sleeves.
Bran perfectly removes greasy pile, but for a more effective result, they must be rubbed into the depth of dense mouton fur. Avoid excessive pressure.
After cleaning, shake the product and brush off the remaining bran with a brush.

So that cleaning a mouton fur coat at home does not cause much trouble, use the following tips:

To remove yellowness and restore shine to white fur, you can use a solution of hydrogen peroxide and ammonia. Add a few drops of alcohol to the bottle of peroxide. Apply the product to a piece of foam rubber or a brush and gently spread over the surface of the fur coat. Leave until completely dry. Then comb the fur. The procedure can be repeated until the color is completely restored.
To clean light fur, you can use a powder with bleach. But in no case do not use it for painted products.
The hair dryer spoils and dries out the fur - discard it in favor of drying in natural conditions.
After wet cleaning, do not take out the fur coat to dry in fresh air. Leave it for a while in the bathroom.
For finishing fur, use walnuts. They have a beneficial effect on the fur and restore its shine. Peel some nuts, grind them up and wrap them in a cloth or cheesecloth. Carefully handle the fur and comb it.
To store a fur coat, use a non-woven cover. It will protect the fur from dust and dirt.

We hope that the described methods will help you clean the Mouton fur coat at home without the help of specialists. To remove dirt and stubborn stains, you need to use a wet cleaning, and to restore color and remove greasy, a dry method is suitable. If you are not sure about the success of the upcoming actions, there is no need to take risks. Take your coat to the dry cleaners.

Winter is coming, and fur coats are replacing jackets. Recently, fur coats from a muton are gaining more and more popularity. Such a product is not afraid of either cold or rain, and with proper care it will be worn for a long time. The main thing is to know how to clean a fur coat from a muton at home, because you need not only to get rid of pollution, but also to do it in such a way as not to harm your favorite thing. Let's look at how to deal with the care of such a product.

Before you begin to remove dirt and stains, read the recommendations of experts:

Before applying the product, test it on an inconspicuous place.
Work in a well-ventilated area, away from children and allergy sufferers.
Some products are quite aggressive, so be sure to protect your hands with gloves.
Don't rub too hard on the stains to avoid damaging the item.
For cleaning, use light-colored rags that do not shed.
Do not dry your fur coat with a hair dryer or near heaters or direct sunlight.
If there are hard-to-remove stains on the product and you are not confident in your abilities, then it is better not to risk it and take the fur coat to the dry cleaner.
After all the procedures associated with cleaning the fur coat, you need to comb it with a brush with rare teeth.
If there is no obvious dirt on the fur coat, then it does not need to be cleaned. Such products are cleaned once a year before being stored for the summer.
A fur coat from a muton should hang on wide hangers so that it does not lose its shape. It cannot be folded.

Getting rid of dust

First you need to get rid of the dust that has probably accumulated between the villi. This can be done in several ways:

Hang the product on a coat hanger, cover with a damp sheet and knock it out like a carpet. All the dust will settle on the sheet.
Vacuum with a small nozzle on minimum power.
Comb with a special fur brush with rare teeth. Be careful when combing small areas.

Removing dirt and stains

How to clean a mouton fur coat at home from dirt? This can be easily done in several ways.

soap solution

The easiest and most affordable way is a soap solution. It must be prepared from washing powder, shampoo or baby soap.

Important! If the fur coat is of dark shades, then it is better not to use products with a whitening effect for its preparation.

Here's how to properly apply such a tool:

Dissolve the detergent and beat into a stiff foam.
Soak a sponge in this foam and apply it to the surface of the product.
Then walk with a sponge dipped in clean water.

Starch

Dry cleaning involves the use of starch or semolina. How to clean a muton fur coat at home using these available tools?

Lay the product on a table or any other flat surface.
Spread starch or semolina over the entire surface of the fur.
Rub the product into the fur, just do not be too zealous.
Shake off any remaining product.
Repeat the procedure if necessary.

Bran

If traces of greasy appear on the product, then you can get rid of them with the help of bran:

Warm up the bran and put it on greasy places.
Rub them a little and shake them off.
Go through the fur with a brush.

Alcohol and vinegar

A mixture of vinegar, alcohol and water in equal amounts is excellent for cleaning a muton. This mixture removes grease stains and other contaminants. Dampen the brush in this solution and go over the entire surface of the product, and then leave it on a hanger in the room until it dries.

Gasoline plus starch

For this method, refined gasoline or aviation gasoline is needed. Refined gasoline can be purchased at the hardware store:

Mix a little gasoline with starch to a slurry.
Apply this paste to problem areas.
Leave until completely dry.
Brush off any remaining product.
Ventilate the product, as the smell of gasoline may remain.

Industrial facilities

Industrial products are also suitable for cleaning a muton - just buy a spray for cleaning nubuck, velor or suede.

Light coat cleaning

How to clean a fur coat from a white or light muton, because over time such a product will turn yellow and lose its beautiful appearance? But there are several ways to help bring back the whiteness to your fur, making it more shiny.

Hydrogen peroxide

This tool has a brightening effect: dilute it in water, in a ratio of 1 to 2, and treat the fur with this solution.

Hydrogen peroxide and ammonia

A mixture of hydrogen peroxide and ammonia will help you. Work this mixture on the surface of the product with a sponge, and you will see the result.

Soap solution plus starch

Starch and a soap solution poured into a spray bottle will help you get rid of stains:

Sprinkle starch over the stain.
Spray it with soapy water from a spray bottle.
Leave until dry.
Remove starch residue with a brush or vacuum cleaner.

We remove the smell

If your favorite fur coat has an unpleasant smell, do not worry, this trouble can be helped:

Pack the product in a vinyl case.
Place a bowl of freshly ground coffee inside the case.
Leave for a while, coffee will nourish the product with its aroma and drown out all unpleasant odors.

How to clean the lining?

Unfortunately, not only the fur gets dirty, but also the lining, which is quite difficult to clean. This can be done in two ways.

Rip off the lining

You can tear off the lining and wash it as usual - in a typewriter or by hand. And then sew it back on. But there are several nuances here. Not everyone is friendly with a sewing machine.

I must say right away that I work as the right hand of a fashion designer engaged in tailoring outerwear. My task is to ensure that the collection is kept in good shape during the show season. Over the years, I have tried many methods for cleaning and updating them. I will tell you how to clean a muton fur coat at home, because I know that the price of dry cleaning will not please even a wealthy person.

Before I introduce you to the methods of cleaning fur products, I must answer a number of mandatory questions:

For convenience, I have placed the answers to them in this table.

Image	Recommendation
	Is it possible to wash a muton fur coat? Do not wash the product in a washing machine - this will damage the material.
	What can not be cleaned fur? Make sure that the product you choose will not ruin the mouton fur coat. Try the product before washing on the wrong side: if the fur does not react in any way, feel free to clean the rest.
	What means cannot be used? Do not resort to extreme measures. Mouton will not tolerate vinegar, acetone, or alcohol. Even if you find out that one of these remedies helped someone, most likely it is not a muton - a fake.
	How to dry a muton? To dry a fur coat at home, simply hang it on a coat hanger or on a mannequin and wait until it dries itself.
	What spoils the fur? Avoid getting perfume and hairspray on the fur. It is cosmetics that are the main source of fur pollution.

Cleaning a fur coat from a muton

Unfortunately, few of us keep outerwear in cases, so it is rarely possible for anyone to protect a fur coat from dust. Do not despair, cleaning a fur coat from a muton at home is possible.

Update fur: 4 ways

Before cleaning, carefully inspect the thing, perhaps a fur coat that has sagged for a couple of seasons in the closet will simply be refreshed:

Image	How to upgrade fur
	Method 1. Shaking. Cleaning a muton at home can begin with an ordinary carpet cracker. Gently beating her thing, you can easily get rid of the dust.
	Method 2. Combing. A comb will help get rid of motes, feathers, etc. stuck in the pile.
	Method 3. Vacuum cleaner. To get rid of dust and debris, use a vacuum cleaner. By selecting the minimum power and making sure that the device is clean, you can clean both a fur coat and a hat.
	Method 4. Roller for clothes. The simplest method for updating a muton fur coat that has not gotten dirty is to thoroughly clean it with a sticky roller. Duct tape will attract dust, loose lint, and other dirt.

Standard cleaning in 5 steps

How to clean a fur coat from a muton? In the fight against fresh spots and light dirt, ordinary cleaning with soapy water will help you.

Suitable for preparing a solution:

laundry soap;
powder without bleach;
shampoo;
carpet cleaner.

Method of work:

Prepare a solution by diluting the soap in water, and beat until a rich foam.
Hang the fur coat with hangers in the bathroom.
Apply foam to the pile, preferably with a brush.
Use a clean brush to remove any remaining dirt and soap.
Leave clothes to dry.

Dry cleaning: 2 methods

As you know, fur does not like moisture, especially white pile. There are two ways to avoid hitting water. When I tell you about each of them, cleaning a fur coat with your own hands will seem like the simplest job.

You can get rid of unpleasant odors and make the fur of a Mouton fur coat fluffy with the help of a steam generator.

Method 1. The method of working with a steam generator is simple:

Place the fur coat on the shoulders in a bright, well-lit place.
Gently steam the fur along the entire length from top to bottom, barely touching the pile.
Allow the product to cool naturally.

Method 2. How to use cereals:

To clean light things, in particular, to remove fat and stubborn dirt from light fur, you need something white and loose ... Semolina, starch, bran? Everything will do!

Image	Procedure
	Step 1 Pour the selected product liberally onto the site of contamination.
	Step 2 Thoroughly but gently rub the product into the grease stain.
	Step 3 Leave the fur coat in this form for a while so that the product properly absorbs dirt and grease - it takes me 1.5 hours.
	Step 4 Shake the fur coat and leave the fur alone for a couple of hours. To finally remove all the grains, you can walk with a soft brush - and the fur will comb out, and the remnants of the grain will fall off.

Fighting heavy pollution: 2 most powerful tools

My experience has shown that getting rid of old dirt on a muton is not an easy task. Out of everything I've tried, I can only recommend two methods. I think cleaning heavy dirt will teach you that care must be timely:

Image

Instruction

Remedy 1. Hydrogen peroxide.

This recipe is suitable in the fight against fat and yellowness on light-colored fur coats:

Dissolve 3 teaspoons of salt and 1 tablespoon of peroxide in 500 ml of water.
Using a cotton swab or soft sponge, apply the solution to problem areas, rub gently.
Rinse off the liquid with a clean sponge.

Remedy 2. Refined gasoline.

This tool will get rid of any contaminants, but the method requires utmost care.

Use exclusively refined gasoline, ordinary will destroy your fur coat.

In equal proportions, mix gasoline and starch.
Apply gruel to problem areas.
Wait until the mixture dries.
Carefully remove any remaining starch with a brush.

Don't forget to air your fur coat well, otherwise you will be haunted by a plume of gasoline.

Summary

I told about all the tricks that I use to clean Mouton things. Do you know other secrets? Write in the "Comments" section, I will be happy to review and test. You will learn how to care for a fur coat from the video in this article.