Tie a big bunny with long ears. Crochet amigurumi bunny with long ears. Diagram of the upper paws of a bunny
Due to its long ears, the amigurumi hare looks cute and touching. In order to make such a cute crochet toy, you will need to stock up on accuracy and patience, as it knits for quite a long time. But this will fully pay off with the emotions that your bunny will give to those around you.
Touching amigurumi bunny in a hood
To knit such a cute hare in a hood, take acrylic yarn. If the thread of yarn is thicker (150-250 m / 100 gr.), Then the toy will turn out to be larger. In the case of a thin thread (300-450 m / 100g), the rabbit will be more elegant, but will require more painstaking work from the needlewoman. To make our bunny, we take white yarn for the head, ears, tail, light green and green - for the body, hood and socks.
In addition, take a hook a little thinner than designed for yarn, scissors, a needle, a pair of black beads for the eye, a pink floss for embroidering the mouth and nose. In order to mark the beginning of a new circular row, you can use a thread in a color different from the main yarn, or a special knitting marking ring.
head diagram
Since all rows are crocheted in the round with single crochets, in our scheme we will indicate only the number of loops.
| Row | Total stitches in the row | |
| 1 | 6 loops from an amigurumi ring | 6 |
| 2 | Knit 2 loops from each single crochet (increment) | 12 |
| 3 | 1 loop without adding (appr.), 1 appr. | 18 |
| 4 | 2, 1 approx. | 24 |
| 5 | 3, 1 approx. | 30 |
| 6 | 4, 1 approx. | 36 |
| 7 | 5, 1 approx. | 42 |
| 8 | 6, 1 approx. | 48 |
| 9 | 7, 1 approx. | 54 |
| 10 | 8, 1 approx. | 60 |
| 11-17 | Knit without approx. | 60 |
| 18 | 8, 1 decrease (dec.) | 54 |
| 19 | 7, 1 kill. | 48 |
| 20 | 6, 1 kill. | 42 |
| 21 | 5, 1 kill. | 36 |
| 22 | 4, 1 kill. | 30 |
| 23 | 3, 1 kill. | 24 |
| 24 | 2, 1 kill. | 18 |
We tightly fill the detail of the rabbit's head with synthetic winterizer, cut off the thread, thread it through the open loops with a hook, pull it into a knot and fasten it.
Body diagram
| ranks | Knitting progress (repeating pattern) | Total stitches in the row |
| 1 | 6 loops from the amigurumi ring with green thread | 6 |
| 2 | Increasing in every stitch | 12 |
| 3 | 1, 1 approx. | 18 |
| 4 | 2, 1 approx. | 24 |
| 5 | 3, 1 approx. | 30 |
| 6 | 4, 1 approx. | 36 |
| 7 | 5, 1 approx. | 42 |
| 8-9 | Light green thread without additions | 42 |
| 10 | 16 loops with green thread, 1 decrease | 40 |
| 11 | 15, 1 dec. | 38 |
| 12 | 14, 1 dec. | 36 |
| 13 | 13 loops with light green thread, 1 decrease | 34 |
| 14 | 12, 1 dec. | 32 |
| 15 | 11 loops with green thread, 1 decrease | 30 |
| 16 | 10, 1 kill. | 28 |
| 17-19 | Knit without kill. | 28 |
| 20 | 9, 1 dec. | 25 |
| 21 | 8, 1 kill. | 22 |
| 22 | No kill. | 22 |
| 23 | 7, 1 kill. | 19 |
We do not close the loops, we pull out the hook and cut the thread. The body is stuffed with synthetic winterizer.
Ear scheme
We knit 2 parts of the rabbit ears as follows:
| Row | Knitting progress (repeating pattern) | Total stitches in the row |
| 1 | With a white thread we close 5 loops in an amigurumi ring | 5 |
| 2 | We knit without additions | 5 |
| 3 | Approx. in every loop | 10 |
| 4-5 | Without approx. | 10 |
| 6 | 1, 1 approx. | 15 |
| 7-8 | Without approx. | 15 |
| 9 | 1, 1 approx. | 22 |
| 10-14 | Without approx. | 22 |
| 15 | 9, 1 dec. | 20 |
| 16-17 | No kill. | 20 |
| 18 | 8, 1 kill. | 18 |
| 19 | No kill. | 18 |
| 20 | 7, 1 kill. | 16 |
| 21-23 | No kill. | 16 |
| 24 | 6, 1 kill. | 14 |
| 25-27 | No kill. | 14 |
| 28 | 5, 1 kill. | 12 |
| 29-31 | No kill. | 12 |
| 32 | 4, 1 kill. | 10 |
| 33-42 | No kill. | 10 |
| 43 | 3, 1 kill. | 8 |
| 44-49 | No kill. | 8 |
Without closing the loop, we pull the thread with a hook and cut it off. The ears are not stuffed with sintepon.
Diagram of the lower legs
| Row | Knitting progress (repeating pattern) | Total stitches in the row |
| 1 | Green thread 6 loops in an amigurumi ring | 6 |
| 2 | Approx. in every loop | 12 |
| 3 | 1, 1 approx. | 18 |
| 4 | 2, 1 approx. | 24 |
| 5 | Without approx. | 24 |
| 6 | 11, 1 approx. | 26 |
| 7-9 | Without approx. | 26 |
| 10 | 11, 1 dec. | 24 |
| 11 | 10, 1 kill. | 22 |
| 12 | 9, 1 dec. | 20 |
| 13 | No kill. | 20 |
| 14 | 8, 1 kill. | 18 |
| 15 | No kill. green thread | 18 |
| 16 | 7, 1 kill. | 16 |
| 17 | No kill. green thread | 16 |
| 18 | 6, 1 kill. | 14 |
| 19 | Cut off the green thread. With a white thread, we collect 14 loops from the 17th row in order to get a sock lapel | 14 |
| 20 | 5, 1 kill. | 12 |
| 21 | No kill. | 12 |
| 22 | 4, 1 kill. | 10 |
| 23-34 | No kill. In the 25th row, change the white thread to green | 10 |
We knit the 2nd detail of the rabbit's legs in the same way. We stuff only the lower part of the paws.
Diagram of the upper paws of a bunny
hare tail
From 6 loops of the amigurumi ring we knit 12 loops in the 2nd row. The 3rd row is performed without changes, and in the 4th row we make a decrease through 2 loops.
Hood
Crochet the hood for the rabbit in the same way as the head, but in about the 11th row we make holes for the ears. In place of the ears, we make 4 air loops, then we attach this chain through to the previous row. Next, we perform in the usual way and on the 16th row we finish knitting.
Bunny assembly
We sew two black beads to the bunny's head - eyes, embroider a nose and mouth with a pink thread. Then we carefully and consistently fix all the details: ears, torso, upper and lower legs, hood. If desired, the bunny can be knitted with a warm scarf or decorated with any other accessories.
A wonderful crocheted hat for babies with long ears, like a real bunny. In such a hat, your baby will look very cute, and if you also knit the same booties, you get a wonderful set. Such a hat can be knitted in different ways, the most beautiful and popular will be presented in this description and master classes.
1 - Hat for baby "Bunny" with colored ears
Ears (make 4: 2 main colors and 2 secondary colors):
Cast on 37 sts.
1st row: 2 tbsp. b / n in the 2nd p. from the hook, art. b / n next. p., (half-s / n in the next p.) - 4 times, (st. s / n in the next p.) / 4 times, (st. s2 / n) - 16 times, (st. s / n in the next p.) / 4 times, (half-s / n in the next p.) - 5 times, st. b / n in the 2nd p., turn.
3rd row: 1 in / p., Art. b / n along 37 p., then turn over and knit in a circle: art. b / n next. p., (half-s / n in the next p.) - 4 times, (st. s / n in the next p.) - 4 times, (st. s2 / n) - 16 times, (st. s / n in the next p.) / 4 times, (half-s / n in the next p.) - 5 times, st. b / n in the 2nd p., turn.
4th row: repeat 3rd row
Finish work.
Assembly: connect 2 ears together st. b/n.
Sew ears to hat
2 - Hat with ears tied in a circle
Head circumference: 48-50 cm
You will need: Brilliant yarn (45% wool, 55% acrylic, 380 m / 100 g) - 100 g of white or any other, the remains of pink for a flower and light green, hook number 2.
Main part: crochet a chain of 5 air with a white thread. p., close in a ring. In the center of the ring, knit 12 tbsp. s / n. Next, knit in a circle, evenly adding 12 stitches in each row, until the diameter of the circle reaches 12 cm (= 
about 9 rows).
evenly add 5 tbsp. s / n. 7 - 16th rows - knit evenly. 17th row - evenly reduce 5 tbsp. 18th row - knit evenly. 19th row - evenly reduce 7 tbsp. 20th row - evenly reduce 5 tbsp. 21st row - evenly reduce 4 tbsp. Tie the second "ear" in the same way.
Assembly:
fold the ears in half and sew to the cap in the center or on the sides, sew on a bow, hat or flower.
How to tie a bowler hat
When knitting for the front wall of the loop, the brim of the hat is bent outwards.
| 10th row: | 36СБН | ) |
Finish knitting by making 1 connecting column.
How to tie ears with ties for little ones
To any hat, so that the wind does not blow, you can tie the ears for the ties. To do this, on a knitted hat leave on the back of the head 30 tbsp. (can be marked with a contrasting thread) and knit 2 more rows. Then tie the "ears" on the sides of the hat according to the scheme. Make ties in the form of braids or twisted cord.
Eyelet scheme for ties
3 - Hat with ears and a flower
You will need:
Acrylic 100% (main color gray);
Pink yarn;
Hook 2.5 mm;
Needle, scissors.
Abbreviations:
VP - air loop;
etc. - increase with double crochets;
ssn. — double crochet;
Art. — single crochet.
1 row: We collect 5VP with a gray thread and close it in a ring. Next 3VP for lifting. We knit 11 dc.
3 row: 3VP and to the end of the row we alternate: 1dc and increase = 36dc.
We finish each row with a connecting loop.
4 row: 3VP, in the next loop 1dc, and in the next loop increase.
Alternate to the end of the row: 2dc and increase. = 48sn.
5 row: 3VP and alternate 3dc and increase to the end of the row = 60dc.
6 row: 3VP and alternate 4dc and increase to the end of the row = 72dc.
7 row: 3VP and alternate 5dc and increase to the end of the row = 84dc.
After the diameter of the bottom reaches 12 cm, the increase must be done through the row.
8 row: 3VP, knit without increments = 84dc.
9 row: 3VP and alternate 6dc and increase to the end of the row = 96dc.
10 row: 3VP, knit without increments = 96dc.
11 row: 3VP and alternate 7dc and increase to the end of the row = 108dc.
EARS (2 PIECES PINK and 2 PIECES GRAY)
We start knitting ears from gray, we knit 2 parts. We collect 44VP and knit according to the scheme. The diagram shows an example for 24VP, but we need longer ears.
Next, we knit pink ears according to the scheme, we knit 2 parts. We also recruit 44VP.
We attach the pink part to the gray part and sew on the edges.
We knit a flower according to the scheme. We start knitting with a pink thread, then we alternate the colors gray and pink. We sew a flower from the right side.
Next, sew on the ears. In order for the ears to be sewn on evenly, first fasten with needles, and then sew.
And your hat is ready!
If you knit with thicker threads or in two threads, the ears will stand, as in the first photo of the model.
4 - Hat with erect ears with a bow and a bowler hat
This hat is knitted in the same way as hat number 2. Only thicker yarn is used for knitting it, or it can be knitted in two or even three threads. Chenille wire is used to stiffen the ears for creativity in white.
Attach a chenille stick to the connected ear and sew it from the wrong side to the edge of the ear and turn it out.
The author of toys and MK - Marina Borisova (Marishka *Borisova ), copying is possible only with the permission of the author and an active link to amigurumi.com.ua.
With this hare you can surprise relatives, friends, colleagues and just acquaintances. After all, the symbol of 2011 is far from a crumb - his height from heels to the tip of his ears is 58 centimeters! Such a half-meter bunny will not leave indifferent either kids or adults - its funny ears and touching eyes simply cannot but touch. Our craftswoman Marina Borisova created this bunny especially for those needlewomen who love big toys that can be squeezed, hugged and put to bed next to their son or daughter. And on our forum there is an MK for the same bunny, only many times smaller - its height is about 10 cm. Therefore, each of you can choose for yourself the scheme of the toy that is more to your liking - either a small bunny for souvenirs, or a large one for a gift and for interior decoration.
Happy knitting!
Materials :
- Any shaggy or plush yarn in two colors: white and pink. For a very large hare 260 m per 100 grams.
White 150g
Pink 50 gr
The thinner the yarn, the smaller the hare will turn out.
A little black for the eyes. Take the yarn a little thinner than the main one.
- long needle
- large eye embroidery needle
- hook for your threads
- filler
- plastic straw (I used an empty pen)
- Super glue
Conventions:
ss - connecting column
vp - air loop
sc - single crochet
pssn - half-column with a crochet
ssn - double crochet
increase - 2 dc, 2 dc or 2 sb in one loop
decrease - 2 dc, 2 dc or 2 sb knit together
head-torso(1 item)
With a white thread, knit in a spiral with half-columns with a crochet.
1 row: 8 dc in the amigurumi ring or cast on 2 ch and knit 8 dc in the second loop from the hook.
6 row: (4 hcs, increase) - 8 times (48)
7 row: (5 pssn, increase) - 8 times (56)
8 row: (6 pssn, increase) - 8 times (64)
9 row: (7 pssn, increase) - 8 times (72)
10 row: (8 hcs, increase) - 8 times (80)
11-21 rows: 80 pssn
22 row: (8 pssn, decrease) - 8 times (72)
23 row: (7 pssn, decrease) - 8 times (64)
24 row: (6 pssn, decrease) - 8 times (56)
25 row: (5 pssn, decrease) - 8 times (48)
26 row: (4 pssn, decrease) - 8 times (40)
27 row: (3 pssn, decrease) - 8 times (32)
28 row: (2 pssn, decrease) - 8 times (24)
29-32 rows: 24 pssn
33 row: (3 pssn, increase) - 6 times (30)
34 row: (4 pssn, increase) - 6 times (36)
35 row: (5 pssn, increase) - 6 times (42)
36 row: (6 pssn, increase) - 6 times (48)
37-44 rows: 48 pssn
It is necessary to insert a rod into the neck of the hare in order for the head to hold well. See photo #1. If there is no such possibility or desire, then just stuff it tightly with filler. But you need to remember that the hare is knitted with pssn and if you stuff it too much, then the filler will be visible through the stretched fabric.
45 row: (6 pssn, decrease) - 6 times (42)
46 row: (5 pssn, decrease) - 6 times (36)
47 row: (4 pssn, decrease) - 6 times (30)
48 row: (3 pssn, decrease) - 6 times (24)
49 row: (2 pssn, decrease) - 6 times (18)
50 row: (1 pssn, decrease) - 6 times (12)
51 row: (decrease) - 6 times (6)
Pull the hole, cut the thread and hide.
Eyes
Black thread (2 parts)
Knit sc in a spiral
2 row: increase -6 times (12)
Try on eyes, if everything suits you, sew. Then embroider highlights with a trouble thread. Make tightenings (prick the needle into the pupil so that the needle comes out in the chin area), fasten and hide the thread. With black thread, embroider eyelashes on top and bottom of the eye. See photo #2
With a pink thread, knit sbn in a spiral.
1 row: 6 sc in the amigurumi ring
2 row: increase - 6 times (12)
3 row: (1 sbn, increase) - 6 times (18)
4 row: (2 sc, increase) - 6 times (24)
5 row: (3 sc, increase) - 6 times (30)
6-9 rows: 30 sc
10 row: (3 sc, decrease) - 6 times (24)
Fasten the thread, leave the end for sewing.
Fill the nose with filler, try on and sew. Embroider cheeks.
Knit with double crochets in straight rows (back and forth).
2 pieces are pink, 2 pieces are white.
Dial 3 in.
1 row: 3 dc in the third loop from the hook, ch 2 to lift, turn.
2 row: increase, 1 dc, increase, ch 2 for lifting, turn (5)
3 row: increase, 3 dc, increase, ch 2 to lift, turn (7)
See photo #6.
4 row: increase, 5 dc, increase, ch 2 to lift, turn (9)
5 row: increase, 7 dc, increase, ch 2 to lift, turn (11)
6 row: increase, 9 dc, increase, ch 2 to lift, turn (13)
7 row: increase, 11 dc, increase, ch 2 to lift, turn (15)
8 row: increase, 13 dc, increase, ch 2 to lift, turn (17)
9 row: increase, 15 dc, increase, ch 2 to lift, turn (19)
10 row: 19 dc, 2 ch for lifting, turn
11 row: increase, 17 dc, increase, 2 ch for lifting, turn (21)
12 row: 21 dc, ch 2 for lifting, turn
13 row: increase, 19 dc, increase, ch 2 for lifting, turn (23)
14-23 rows: 23 dc, ch 2 to lift, turn
24 row: decrease, 19 dc, decrease, ch 2 to lift, turn (21)
25-27 rows: 21 dc, ch 2 to lift, turn
28 row: decrease, 17 dc, decrease, 2 ch for lifting, turn (19)
29-30 rows: 19 dc, ch 2 to lift, turn
31 row: decrease, 15 dc, decrease, 2 ch for lifting, turn (17)
32-33 rows: 17 dc, ch 2 to lift, turn
34 row: decrease, 13 dc, decrease, 2ch for lifting, turn (15)
35-36 rows: 15 dc, ch 2 to lift, turn
37 row: decrease, 11 dc, decrease, 2 ch for lifting, turn (13)
38-39 rows: 13 dc, ch 2 to lift, turn.
Put together the white and pink parts and tie them together with one row of sc. At the tip of the ear, knit 3 sc at the top of the ear so that the edge is even.
Try on the ears and sew to the head.
Legs
Knit with half-columns with a crochet.
Consist of 2 parts: upper and lower.
Upper part with white thread (2 parts)
Knit in the round with air loops for lifting.
Cast on 21 ch starting from 3rd st from hook:
1 row: 18 dc, 5 dc in one loop, knit on the other side of the chain 17 dc, 4 dc in the initial loop, sl-st (44)
2 row: ch 2 for lifting, increase, 17 pss, (increase) - 5 times, 17 sbn, (increase) - 4 times, sl-st (54)
See photos #3 and #4.
3 row: ch 2 to lift, 1 dc, increase, 17 dc, (increase, 2 dc) - 3 times, increase, 17 dc, (increase, 2 dc) - 2 times, increase, 1 dc, sl-st (62)
4 row: ch 2 for lifting, 2 dcs, increase, 18 dcs, (increase, 3 dcs) - 3 times, increase, 18 dcs, (increase, 3 dcs) - 2 times, increase, 1 dcs, sl-st (70)
5 row: 2 ch for lifting, 3 dcs, increase, 19 dcs, (increase, 4 dcs) - 3 times, increase, 19 dcs, (increase, 4 dcs) - 2 times, increase, 1 dcs, sl-st (78)
6 row: ch 2 for lifting, 4 dcs, increase, 20 dcs, (increase, 5 dcs) - 3 times, increase, 20 dcs, (increase, 5 dcs) - 2 times, increase, 1 dcs, sl-st (86)
7-12 rows: ch 2 for lifting, 86 pssn
Fasten the thread, cut
Lower part with pink thread (2 parts)
1-6 row - knit, as the upper part. Connect the upper and lower parts with a seam over the edge, stuff with filler during the stitching process. Embroider fingers. See photo #5
upper paws
White thread (2 parts).
1 row: 7 dc in the amigurumi ring or cast on 2 ch and knit 7 dc in the second loop from the hook
2 row: (increase) - 7 times (14)
3 row: (1 hcs, increase) - 7 times (21)
4 row: (2 pssn, increase) - 7 times (28)
5 row: (3 pssn, increase) - 7 times (35)
6-9 rows: 35 pssn
10 row: (3 pssn, decrease) - 7 times (28)
11 row: 28 pssn
12 row: (2 pssn, decrease) - 7 times (21)
13-15 rows: 21 pssn
16 row: (1 pssn, decrease) - 7 times (14)
17 row: 14 pssn
18 row: decrease - 7 times
Pull the hole, fasten the thread, leave the end for sewing.
Embroider fingers.
Tail
White thread.
1 row: 8 dc in the ring of amigurumi or cast on 2 ch and knit 8 dc in the second loop from the hook
2 row: (increase) - 8 times (16)
3 row: (1 hcs, increase) - 8 times (24)
4 row: (2 pssn, increase) - 8 times (32)
5 row: (3 hcs, increase) - 8 times (40)
6-10 rows: 40 pssn
11 row: (3 pssn, decrease) - 8 times (32)
12 row: (2 pssn, decrease) - 8 times (24)
13 row: (1 pssn, decrease) - 8 times (16). Fill with filler.
14 row: (decrease) - 8 times
Fasten the thread, leave the end for sewing, cut.
Sew on the legs, upper legs and tail.
Any questions about the scheme can be asked.
Sewn tilde toys have long been loved by our needlewomen. That's just the trouble - not everyone knows how to sew and love, but crocheting or knitting is a completely different matter! And in just a few years, descriptions of knitted tilde toys appeared on the Internet - bunnies, bears, cats, snails, pupae. We offer you to tie wonderful hares. They are crocheted, but clothes can be sewn or knitted. Such a toy can be a great gift for both kids and adults (for example, for a wedding or an anniversary of family life). The bunny itself knits easily and quickly, but assembly and decoration require some skill. The scheme was compiled specifically for the Amigurumi forum, copying is prohibited. The author is Dashajr. Happy knitting!
The height of the toy is about 30 cm.
Yarn and other materials :
Body: Pekhorka "Merino" 100g - 200m (50% wool, 50% acrylic). Color 124 or 270. It took 1.5 skeins.
Pants - any yarn 100g - 300 meters.
Dress, jumpsuit, boots, beret, jacket - Semenov yarn "Svetlana ChSh" 100g - 250 meters (95% wool, 5% acrylic). Any colors. One skein was left for the dress and beret, half a skein was left for the jacket and boots.
For the soles of shoes - any yarn 100g-200 meters a small amount of yarn.
Soutache (you can use something of your own) for laces.
Two beads (for the eyes).
Iris pink for nose embroidery.
A little bit of felt (in the color of the nose, but you can do without it)
Dental floss for tightening (can be replaced with any strong thread).
Hook 1.7 (hook number for your yarn)
Needles number 2 (5 pieces).
Conventions :
sc - single crochet
approx. - increase (2 columns in one loop)
kill - decrease (2 columns together)
persons. - we knit all the loops of the front
purl - knit all loops purl
Head and neck(1 item)
2 row: (prib) -6 times = 12 sc
4 row: (2 sc, prib) -6 times = 24 sc
5 row: (3 sc, prib) -6 times = 30 sc
6 row: (4 sc, prib) -6 times = 36 sc
7 row: (5 sc, prib) -6 times = 42 sc
8 row: (6 sc, prib) -6 times = 48 sc
9 row: (7 sc, prib) -6 times = 54 sc
10 row: (8 sc, prib) - 6 times = 60 sc
11-19 row: 60 sc
20 row: (8 sc, dec) -6 times = 54 sc
21 row: (7 sc, dec) -6 times = 48 sc
22 row: (6 sc, dec) -6 times = 42 sc
23 row: (5 sc, dec) -6 times = 36 sc
24 row: (4 sc, dec) -6 times = 30 sc
25 row: (3 sc, dec) -6 times = 24 sc
26 row: (2 sc, dec) -6 times = 18 sc
27-29 row: 18 sc
We do not tear off the thread!
We stuff in the process of knitting.
We fill the head not “with stone” so that we can make a tightening.
Body(1 item)
We continue to knit with a thread from the head.
30 row: (2 sc, prib) -6 times = 24 sc
31 row: (3 sc, prib) -6 times = 30 sc
32 row: (4 sc, prib) -6 times = 36 sc
33 row: (5 sc, prib) -6 times = 42 sc
34 row: 42 sc
35 row: (6 sc, prib) -6 times = 48 sc
36 row: (7 sc, prib) -6 times = 54 sc
37 row: 54 sc
38 row: 16 sc, (1 sc, inc) -6 times, 26 = 60 sc
39-50 row: 60 sc
51 row: 20 sc, (1 sc, inc) -6 times, 28 sc = 66 sc
52-55 row: 66 sc
56 row: (9 sc, dec) -6 times = 60 sc
57 row: (8 sc, dec) -6 times = 54 sc
58 row: (7 sc, dec) -6 times = 48 sc
59 row: (6 sc, dec) -6 times = 42 sc
60 row: (5 sc, dec) -6 times = 36 sc
61 row: (4 sc, dec) -6 times = 30 sc
62 row: (3 sc, dec) -6 times = 24 sc
63 row: (2 sc, dec) -6 times = 18 sc
64 row: (1 sc, dec) 6 times = 12 sc
65 row: (dec) to the end of the row
Break the thread.
We stuff in the process of knitting.
Where there will be increases (a bulge on the body) we have in front of us.
Who knits loosely, you can insert a piece of wire into the neck, otherwise the head may collapse (it will have long ears). The neck area, for everyone, I advise you to fill it more tightly, but not to the point of swelling. I knit tightly, my head holds without problems.
Paws-handles(2 parts)
1 row: 6 sc in the amigurumi ring
2 row: (prib) -6 times = 12 sc
3 row: (1 sc, prib) -6 times = 18 sc
4-7 row: 18 sc
8 row: (1 sc, dec) * 6 = 12 sc
9-28 row: 12 sc
29 row: dec to end
We stuff in the process of knitting. We do not stuff the paws much up, otherwise they will stick out strongly to the side when you sew. Hide the threads.
legs(2 parts)
Sole(2 parts)
1 row: dial 10 ch, approx. in the 2nd loop from the hook, 7 sc, 4 sc in the last loop of the chain.
We continue on the back of the chain - 7 sc, approx. in the last loop = 22 sc
Break the thread.
Make an insole. Circle the foot on the cardboard.
Up feet(2 parts)
1 row: dial 10 ch, approx. in the 2nd loop from the hook, 7 sc, 4 sc in the last loop of the chain.
We continue on the back of the chain - 7 sc, approx. in the last loop = 22 sc
2nd row: (inc) -2 times, 6 sbn, (inc) -6 times, 6 sbn, (inc) -2 times = 32 sbn
3rd row: 1 sc, inc, 7 sc, (inc, 1 sc) -7 times, inc, 6 sc, inc, 1 sc = 42 sc
4 row: (6 sc, prib) -6 times = 48 sc
5 row: (inc, 7 sb) -6 times = 54 sb
6-12 row: 54 sc
We do not tear off the thread, we apply the foot and begin to tie (connect) (sc) the foot to the top of the foot. Do not forget to insert the insole and stuff it.
Leg(2 parts)
Dial 18 sc on the foot and knit in a circle 24 rows
25 row - (1 sc, dec) -6 times = 12 sc
26 row - (dec) to the end
We stuff in the course of knitting.
Option 2
1 row: 6 sc in the amigurumi ring
2 row: (prib) -6 times = 12 sc
3 row: (1 sc, prib) -6 times = 18 sc
4 row: 18 sc for the back half loop
The remaining rows are as usual, and sew the leg to the foot for the front half-loop.
Ears(2 parts)
1 row: 6 sc in the amigurumi ring
2 row: (prib) -6 times = 12 sc
3 row: (1 sc, prib) -6 times = 18 sc
4 row: 18 sc
5 row: (2 sc, inc) -6 times = 24 sc
6 row: 24 sc
7 row: (3 sc, prib) -6 times = 30 sc
8-12 row: 30 sc
13 row: 13 sc, dec, 13 sc, dec = 28 sc
14-16 row: 28 sc
17 row: 12 sc, dec, 12 sc, dec = 26 sc
18-20 row: 26 sc
21 row: 11 sc, dec, 11 sc, dec = 24 sc
22-24 row: 24 sc
25 row: 10 sc, dec, 10 sc, dec = 22 sc
26-27 row: 22 sc
28 row: 9 sc, dec, 9 sc, dec = 20 sc
29-30 row: 20 sc
31 row: 8 sc, dec, 8 sc, dec = 18 sc
32-34 row: 18 sc
35 row: 7 sc, dec, 7 sc, dec = 16 sc
36-39 row: 16 sc
40 row: 6 sc, dec, 6 sc, dec = 14 sc
41-60 row: 14 sc
61 row: fold the piece in half and knit the two halves together.
Tear off the thread, leaving a long end for sewing.
Whose ears turned out to be very “standing”, hold over a boiling kettle or pan - the ears will become softer. Be careful - you can burn your fingers!
Making a muzzle
We make the muzzle tightening (I do it with dental floss).
We find the toys in front (where there were increases), we introduce a thread in the region of the 22nd row (we find the middle of the head), we bring out the needle in the region of the 10th row, we grab three columns and we bring out the needle in the 22nd row (at one point).
We pull the muzzle, by tightening and tying a knot, which we then hide in the head
Embroider the nose
Cut out a piece of felt or any other fabric. Cut out the shape of the nose and apply to our face.
Next, we take an iris (I tried to embroider a floss - the thread gets confused and does not lay down beautifully, so I chose an iris - rhymes fit well). And we begin to embroider from the middle of the nose (I embroider from the middle, it is more convenient to give symmetry to the nose). Paying attention! We sew (sew) a blank for the nose in the head, so the nose will be neat.
We take a floss thread (a whole skein - 6 threads) and make a broach from the tip of the nose to the tightening point.
We try on the eyes - suits - sew.
boots
To begin with, we try on future legs to the body, WITHOUT shoes. We tried it on, you can even sew it on (i.e. skip the thread - fastening through the legs and body) and see if everything suits you, if everything suits you, we mark with pins the places where you will then insert the threads for fastening (we mark on the body and on legs). Thus, we marked future puncture sites with a needle with a fastener for further collection of the toy.
I sewed the legs on the sides.
We don't sew on the legs!
Only after that (trying on the legs) do we start knitting boots.
Sole (2 parts) - hook
1 row: dial 10ch, approx. in the 2nd loop from the hook, 7sc, 4sc in the last loop of the chain.
We continue on the back of the chain - 7sc, approx. in the last loop = 22 sc
2nd row: (inc) -2 times, 6 sbn, (inc) -6 times, 6 sbn, (inc) -2 times = 32 sbn
3rd row: 1 sc, inc, 7 sc, (inc, 1 sc) -7 times, inc, 6 sc, inc, 1 sc = 42 sc
4 row: (6 sc, prib) -6 times = 48 sc
5 row: (inc, 7 sb) -6 times = 54 sb
6 row: (inc, 8 sb) -6 times = 60 sb
7th row: 60 sc for the front wall
Tear off the thread (may be wavy - nothing to worry about)
Up the boot - knitting needles (5 pieces)
Cast on 60 sts on 4 needles (15 sts on each needle)
Knit in the round for 20 rows in stockinette stitch.
21 row - 19 persons., (kill, 1 persons) * 7, 20 persons.
22nd row - 19 persons., (ub) * 7, 20 persons.
23 rows - 18 persons., ub., 5 persons., ub., 19 persons
24 row - 17 persons., ub., 5 persons., ub - expand knitting
25 row - remove 1 loop, 5 out., ub.-expand
26 row - remove 1 loop, 5 persons., ub. - expand
27 row - remove 1 loop, 5 out., ub.-expand
28 row - remove 1 loop, 5 persons., Dec. - expand
Somewhere in this place (or maybe a row earlier - try on) you need to insert your foot into the boot and tie the boot already on the leg.
29 row - remove 1 loop, 5 out., ub.-expand
30 row - remove 1 loop, 5 faces., ub. - expand
31 row - remove 1 loop, 5 out., ub.-expand
32nd row - remove 1 loop, 5 persons., Dec. - expand
Pay attention to the set of loops on the knitting needles. We take the sole facing us and begin in this position to pick up loops on the knitting needle. I crochet stitches. This is necessary for the correct direction of knitting on the needles, so that you knit in a circle (on the needles) and get facial loops on the “face” 🙂
After closing the loops of the toe
Shoe tongue - knit already on the leg
To 7 central loops, add (cast on) one loop at the edges to make 9 loops. And on these loops knit the tongue of the boot.
You can knit simply with front or back loops, or you can also patterned.
To do this, in the front row, alternate 1 person., 1 out., And in the purl row above the front we knit purl loops, and over the front - purl loops.
Knit 15 rows of tongue
16 row - close all the loops.
Shaft - knit on the leg
We knit in rotary rows (back and forth - not in a circle) 13 rows with front stitch
14th row: kill, knit 25
15 row: kill, purl 24
16 row: close all loops
Hide all the threads.
Clothes (panties for a girl and a jumpsuit for a boy)
Panties(knit on 4 knitting needles in a circle)
Cast on 80 stitches. Distribute 20 loops on each knitting needle)
We knit with an elastic band 2/2 (k2, purl 2 - alternate to the end of the row) 8 rows.
Next row we make increments (we knit two from one loop) from the first and last loop on the knitting needles (i.e. from the first loop and from the 20th loop - on 1 and 2 and 3 and 4 knitting needles). We get 88 loops.
Next row - Cast off 7 sts, 30 sts, cast off 14 sts, 30 sts, cast off 7 sts.
Break the thread
* We attach the thread to 30 loops and start knitting in a circle (we knit a trouser leg). Distribute 10 loops on three knitting needles.
Close loops.
Tear off the thread.
This action * repeat for the second leg.
Then you need to sew a hole between the legs.
Pants are ready. We insert the legs into the pants and only then sew the legs with boots and pants to the body.
We sew hands. Sew on the ears (I sewed on the ears, stepping back three rows on the crowns in different directions, you can sew the ears lower, as you like)
Jumpsuit
Cast on 28 sts on needles.
1 row: out.
3 row: out.
5 row: out
7 row: out
Row 8: K7, yarn over, 1p, yarn over, 10p, yarn over, 1p, yarn over, 14p, yarn over, 1p, yarn over, 10p, yarn over, 1p, yarn over, 7p
9 row: out
10 row: 8p, yarn over, 1p, yarn over, 12p, yarn over, 1p, yarn over, 16p, yarn over, 1p, yarn over, 12p, yarn over, 1p, yarn over, 8p
11 row: out
12 row: knit 9, close 16p, 18p, close 16p, 9p.
13 row: 9p, add 5p, 18p, add 5p, 9p.
14 row: all facial.
15 row: all purl
16 row: (1 person p, loop from broach) * to the end of the row
17 row: out.
18 row - 20 persons., (1 person.p, loop from the broach) * to the marker., 20 persons.
When you knit the last purl row, knit the last two loops together to get an even number of loops, in my case 140 loops.
Next row - 70 persons., cast on 10 loops per knitting needle - close in a ring (when you knit 70 front loops + 10 dialed loops, immediately divide these loops into 3 knitting needles - it will be more convenient to close in a circle and knit)
Next row - knit
Next row - 69 persons., ub., 8 persons., ub.
Next row - 68 persons., ub., 6 persons., ub.
Next row - 68 persons, dec, 4 persons, dec.
Next row - 68 persons, dec, 2 persons, dec.
Next row - 68 persons., kill, kill.
Next row - 68 persons., ub.
Next row - (1 person., ub) * to the end of the row, 1 person (46 persons)
Next row - knit
Next row - knit
Next row - (3 persons., Dec) * to the end of the series (the last decrease is made of three loops) (36 persons)
Track. row - we make an elastic band 2/2 (2 persons., 2 out.)
Track. row - close all loops
In the same way we make the second leg.
Sew the resulting hole between the legs
And we sew (by marks) the body to the legs
Then we sew the hands
We put on the jumpsuit to the end (put our hands into the holes for the sleeves) and sew the seam (right on the hare) to the end.
At the end we sew on the ears.
P.S. The combo will be free. Again, I repeat, if you knit freely, take a thread thinner than 100g-250 meters and knitting needles less than No. 2.
Lacing
I bought 2 meters. You can use soutache, cord, laces, etc.
We cut off 45 cm (if you want a bigger bow, cut off a longer lace).
We take one loop and pull the lace with a hook
On the other hand, we do the same. We get
We mark the same number of loops up and do the same operation
And tie bows
Dress
Cast on 28 sts on needles.
1 row - out.
2nd row: 4 knit p, yarn over, 1 knit stitch, yarn over, 4 knit stitch, yarn over, 1 knit stitch, yarn over, 8 knit stitch, yarn over, 1 knit stitch, yarn over, 4 knit stitch, yarn over, 1 knit stitch, nakid, 4l.p.
3 row - out.
4 row: 5 knit p, yarn over, 1 knit stitch, yarn over, 6 knit stitch, yarn over, 1 knit stitch, yarn over, 10 knit stitch, yarn over, 1 knit stitch, yarn over, 6 knit stitch, yarn over, 1 knit stitch, yarn over , 5 persons.p.
5 row - out
Row 6: K6, yarn over, 1p, yarn over, 8p, yarn over, 1p, yarn over, 12p, yarn over, 1p, yarn over, 8p, yarn over, 1p, yarn over, 6p.
7 row - out
8 row - 7 p, yarn over, 1p, yarn over, 10p, yarn over, 1p, yarn over, 14p, yarn over, 1p, yarn over, 10p, yarn over, 1p, yarn over, 7p
9 row - out
10 row - 8p, yarn over, 1p, yarn over, 12p, yarn over, 1p, yarn over, 16p, yarn over, 1p, yarn over, 12p, yarn over, 1p, yarn over, 8p
11 row - out
12 row -9 persons.p, close 16p, 18p, close 16p, 9p.
13 row - 9p, add 5p, 18p, add 5p, 9p.
14 row - all facial.
15 row - all purl
16 row - (1 person p, loop from broach) * to the end of the row
17 row - out.
18 row - 20 persons., (3 persons. p, loop from the broach) * to the marker., 20 persons.
Insert a zipper or sew on buttons.
Jacket and hat
Cast on 34 stitches
1 row - purl loops
2nd row - knit 5, yarn over 1, knit 1, yarn over 1, knit 5, yarn over 1, knit 1, yarn over 1, knit 10, yarn over 1, knit 1, yarn over 1, knit 5, yarn over 1, knit 1, yarn over 1 , 5 persons.
3rd row - purl loops, knit all yarn overs (42 p.)
4 row -6 knit, 1 yarn, 1 knit, 1 yarn, 7 knit, 1 yarn, 1 knit, 1 yarn, 12 knit, 1 yarn, 1 knit, 1 yarn, 7 knit, 1 yarn, 1 knit, 1 yarn, 6 persons.
5 row - out. (50 p.)
6 row - K7, 1 yarn over, 1 knit, 1 yarn over, 9 knit, 1 yarn over, 1 knit, 1 yarn over, 14 knit, 1 yarn over, 1 knit, 1 yarn over, 9 knit, 1 yarn over, 1 knit, 1 yarn over , 7 persons.
7 row - out. (58 p.)
8 row - knit 8, 1 yarn over, knit 1, 1 yarn over, 11 knit, 1 yarn over, 1 knit, 1 yarn over, 16 knit, 1 yarn over, 1 knit, 1 yarn over, 11 knit, 1 yarn over, 1 knit, 1 yarn over, 8 persons.
9 row - out. (66 p.)
10 row - knit 9, 1 yarn over, knit 1, 1 yarn over, 13 knit, 1 yarn over, 1 knit, 1 yarn over, 18 knit, 1 yarn over, 1 knit, 1 yarn over, 13 knit, 1 yarn over, 1 knit, 1 yarn over, 9 persons.
11 row - out. (74 p.)
12 row - 10 knit, 1 yarn over, 1 knit, 1 yarn over, 15 knit, 1 yarn over, 1 knit, 1 yarn over, 20 knit, 1 yarn over, 1 knit, 1 yarn over, 15 knit, 1 yarn over, 1 knit, 1 yarn over, 10 persons.
13 row - out. (82 p.)
14 row - 11 yarn, 1 yarn, 1 knit, 1 yarn, 17 knit, 1 yarn, 1 knit, 1 yarn, 22 knit, 1 yarn, 1 knit, 1 yarn, 17 knit, 1 yarn, 1 knit, 1 yarn, 11 persons.
15 row - out. (90 p.)
Now you need to divide the work, remove the sleeves on threads or pins, as it suits you, and knit the back and two front shelves together on two knitting needles
16th row - knit 12 front loops of the front, remove 21 loops of the sleeves on the thread, 24 front backs, remove 21 sleeves on the thread, 12 front front
17 row - out. (48 p)
18 row - (1 person.p, loop from broach) * to the end of the row
We knit the desired length of the jacket.
Close loops.
Crochet (optional)
Sleeves
Divide sleeve sts into 3 needles. Cast on 3 sts for armhole.
Knit the required length (about 40 rows) of the sleeves for 24 loops.
Sew up the hole formed at the armhole.
Close loops.
Collar
Cast on 32 sts at the neck
1 row - out
2 row - (4 persons, a loop from a broach) * 7 times, 4 persons.
3 row - (1 out., 1 persons) * to the end of the row
Next row - close all loops.
We cling to the front of the loops
For the yellow jacket
Cast on 32 sts at the neck
1 row - out
2 row - (4 persons, a loop from a broach) * 7 times, 4 persons.
Track. row - close all loops.
Beanie
Cast on 67 stitches.
1 row - (1 out., 1 persons) * to the end of the row
Next row - knit 4 rows of LG
Next row - 16 persons., 10 loops to close, 15 persons. (16 loops on the needles), close 10 loops, 15 faces.
Next row - purl 15, cast on 10 sts, purl 16, cast on 10 sts, purl 16.
Next row - 2 persons, (6 persons, ub) * 8 times, 1 persons.
Next row - out
Next row - 1 person, (5 person, ub) *, 2 persons
Next row - out
Next row - 1 person, (1 person, ub) *, 2 persons.
Next row - out.
Next row - kill * to the end of the row, 1 person.
Pull off the loops, sew a hat.
We make ropes with pompoms.
You can watch online here - http://website/forum/index.php?showtopic=20910
It is better to ask a question according to the description here - http://site/forum/index.php?showtopic=47789
It is important for every child to have a cute and cute bunny in his toy collection.
Indeed, for almost every child, a bunny is associated with kindness. Seeing such a toy, the heart overflows with love for this tiny creature.
Today in stores you can find various bunnies - Mi, Teddy, and others.
Make this toy for your baby or babies is easy. The main thing is to prepare all the necessary materials, tools and a bunny pattern.
We sew Mi bunny
For this type of toy, you can use any plain or not too colorful fabric.
As a filler you can take sintepuh, sintepon, synthetic wool.
In addition to the main material, we will need such devices as:
- buttons, they will be used to secure the arms and legs of the toy;
- sewing accessories;
- tailor's scissors.
Before you get started, you need to find a toy pattern. It is easy to do, it is presented just below, print it on and cut out every detail.
Download the pattern to your computer, print and cut
You should get the following details:
- half head - 2 pcs.;
- on the neck - 1 pc.;
- ear - 4 pcs.;
- shoulder - 2 pcs.;
- hand - 4 pcs.;
- tail - 1 pc.;
- leg - 4 pcs.
The finished bunny pattern must be cut out of paper. We put each of the details on the fabric and carefully outline, then cut out. Do not forget to leave 3 - 5 mm from each edge for seam processing.
Now we add each of them in pairs and sew. Parts must be folded with the right side inward..
The main thing is to leave a small distance through which we will turn the parts on the front side, and also fill them with filler.
As soon as all the components of the Mi Bunny (the pattern above in the article) are completely ready, they must be filled with the filler that you choose. For this action, it is best to use a pencil or any plastic stick.
It is necessary to fill the parts carefully from the far ends.
The main thing is that the filler does not crumple in one place, but is evenly distributed throughout the part, including in the corners themselves.
As you remember, we left a place in order to be able to easy to stuff bunny details and turn out.
Now the places through which the stuffing was carried out must be sewn up with a secret seam.
The arms and legs of the bunny are attached to the body with a button. Thus, the bunny is easy to plant in a certain position. We combine all the details into a single toy. That's all, the do-it-yourself bunny is completely ready.
Hare Tilda
To sew a hare, we transfer the pattern to the base fabric (see below). We cut out all the details, not forgetting about the additional space of half a centimeter for processing seams.
Some types of fabric fray a lot, in order to prevent this, it is recommended to treat the edges with a special solution.
To do this, you need to mix simple PVA glue and clean cold water in a ratio of one to one. Moreover, no traces of the composition will be visible, and the fabric will become harder.
To make a Tilda bunny on your own, we need:
- body fabric - linen;
- choose the fabric for clothes yourself based on your taste preferences;
- sewing accessories;
- simple pencil;
- scissors;
- printed pattern of a soft toy;
- sintepon.
Manufacturing steps:
- Finished parts need to be sewn with a machine seam, trim a little excess fabric by 2 millimeters. Remember that you need to leave a little space for eversion and stuffing parts.
- Using a pencil, carefully turn inside out and straighten the seams with your own hands. We iron and fill with filler, we do it tightly so that there are no voids left. That's all, the components of the hare are ready.
- At the body of the toy, slightly bend the remaining fabric and sew it with your own hands with a basting seam. Then carefully insert the legs and sew them together with the body, remove the extra threads. The main thing is that the limbs of the hare are the same.
- The paws must be sewn by hand, and the seam must be hidden. We sew the ears in the same way, and only then we attach them to the head of a soft hare.
- The soft toy is almost ready, there is very little left - to sew a nose, make eyes and a mouth. For a more expressive look, it is recommended to make rosy cheeks for the animal. We use simple blush and a large brush.
- Now you need clothes for the finished soft bunny. If your toy is large, then we measure it and make a pattern of pants, blouses. If it is small, then in this case you can use the Internet and download the finished pattern.
Pants for a bunny
- We cut out all the details from a suitable material, not forgetting to leave additional space for seam processing. First of all, we sew the pants. It would be better if it was a jumpsuit. Only then we sew a blouse, and if possible, you can make a beautiful hat.
Ready bunny Tilda will certainly please any kid
- You can decorate the bunny's clothes with various decorative elements. It can be buttons, beads, rhinestones and so on. That's all, the toy is completely ready.
