Menu
homeFor a wedding

Knit a hood for discharge from the hospital with knitting needles. Master classes on knitting different models of hats for newborns. Openwork for discharge

A warm hat for a newborn baby is knitted with knitting needles quickly and quite simply. Using the description of knitting, even a beginner knitter will “master” the hat. When knitting, it is very important to choose the right yarn. It is better to use natural cotton, and for a warm cap - woolen threads. Merino wool is very well suited - it makes soft, non-scratch children's bonnets. Before starting knitting, you need to determine the required number of loops. To do this, you need to knit a sample from the selected yarn and count how many loops and rows in 1 cm of knitted fabric.

Approximate table of children's sizes:

For everyday wear for a newborn, it is better to choose caps of a simple style, with a minimum of bows, frills, ruffles, etc. These decorations can interfere with the baby.Hats with ears are more suitable for winter time.

Knitting a cap for kids with a description and patterns

Such a hat is suitable for both a boy and a girl - it all depends on the choice of thread color. For work you will need:

∗ straight or circular knitting needles (optional, whichever is more convenient for you) No. 1, 5 and No. 2. Thinner knitting needles - for knitting elastic, so it will look neater;

* yarn - about 50g.

Knitting density - about 28 loops per 10 cm.

We collect 75 loops on knitting needles No. 1, 5 - this is for a face circumference of 27 cm. We knit with an elastic band 1lx1 out . two cm, then go to sp. No. 2 and knit with front stitch 8 cm. To tie the bottom, divide all the loops into three equal parts and knit like the heel of a sock, knitting the central part with the capture in each row, one loop from the extreme parts.

When the bottom is tied to half, you need to evenly reduce its width on both sides so that by the end of knitting it is 3 cm. To knit an elastic band, go to sp. No. 1.5. We collect on both sides from the lower edge of the loop for the neck and knit 2.5 cm with an elastic band 1lx1 out. We close. We make ties.

Openwork cap for a newborn girl with a description

For work you will need:

∗ yarn, better blended in composition - acrylic and cotton, average thickness -50g with a length of 160m;

∗ circular knitting needles No. 3.

Description of the boucle pattern

1 p. - 1 persons ., 1 out .;

2 p. and all even ones - according to a visible pattern;

3 p. - over the facial - purl, over out . - facial;

5 p. - repeat from 1 p.

Description of the pattern "Openwork rhombuses"

The number of loops should be divisible by 6 plus 7, plus two edge loops. Scheme:

Cap for a girl with a description

Cast on 57 loops with knitting needles - about 28 cm and knit for a lapel 12p. boucle pattern.

Then - with the pattern "Openwork diamonds" tie 7.5 cm. The length from the first row is 11 cm.

Divide the total number of loops into three equal parts of 19 p. Next, you need to tie the bottom as in the previous model - according to the principle of decreasing loops for the heel of the toe: the central 19 p - exactly, with a diamond pattern, extreme loops on both sides we knit grabbing one loop from the first and third parts of knitting. As a result, we get 19p.

To make the cap sit tighter on the baby's head, in the next row we make a decrease: 1 chrome ., 2 - 1 persons ., 2 - 1 purl. Remaining - 10 p.

We bend the lapel on the inside . side. We collect 55 loops (for a tie), then 15 sts from one half - the “Diamonds” pattern, 10 sts - the bottom of the bonnet, another 15 sts from the second half, and again we collect 55 loops (the second tie). First row - facial all:

55p. + 40p. + 55p. = 150p.

We make two rows with the Boucle pattern and close the loops. Cut the thread, fill its edge.The girl's hat is ready!

Winter hat with ears for a newborn with a description and diagrams

The calculation is made for a head volume of 35 cm. Knitting density - 2px3 p. = 1 cm x 1 cm.

For work you will need:

∗ 50 g of wool yarn for a cap and a little colored yarn for decoration;

∗ knitting needles No. 2 - straight and circular

Description of the knitting pattern

We start with the ears. To do this, dial 4p. on direct sp. We knit 16r., Making increases symmetrically on both sides:

2r. and 4 p. - plus 1 p. on each side;

6 p. - plus 2 p. from 2 sides;

8 p. - plus 3p. from 2 sides;

15 p. and 16 p. - plus 1p. from 2 sides.

Next, we transfer one ear to a circular knitting needle (22p.), We collect 11 p., We transfer the second ear, we collect 25 loops. Then you need to tie 30 p. (10 cm) stockinette stitch. For the top of the cap, we make a decrease only in even rows. We divide all the loops (80p.) into five parts and in each at the edges we subtract one p. - per row minus 10 p. When 6p remains. in each part - we make a decrease in each row, and not every other time. Pass the thread through the remaining loops, bring to the wrong side, tighten.

You can decorate, sew on ribbons in different versions - both for a girl and for a boy.

The ears of newborns can be insulated with fur. A variant of knitted according to the same pattern, but with a 2x2 elastic band, a winter children's hat for a boy. Baby hat with ears is ready!

Hat with a bear for a newborn with a description and diagrams

For work you will need:

∗ blue yarn - 50g;

∗ some black and lilac yarn;

∗ circular and straight knitting needles No. 2;

∗ needle with a large eye;

* one black bead.

Description of work

We start with the crown. We collect 80 p. with blue yarn and knit 50 p. facial smoothness. Then three r. white yarn and bind off all loops. Pull the loops at the crown. Then you need to bend the bottom edge of the cap, hem. Now we untie ears. We collect 22 sts from the edge loops on straight knitting needles and knit 16 p. front stitch, as in the previous model. Gradually we make a decrease:

1r. -1 chrome., 2 persons together., 16 persons., 2 persons together., 1 chrome. 20 sts left;

2r. -1 chrome ., 2 together out ., out ., 2 together out ., 1 chrome. 18 sts left;

From the 3rd to the 12th p. - according to the drawing;

13r. - 1 chrome ., 2 - 1 persons., 2 together persons., 2 - 1 persons., 4 persons ., 2- 1 persons ., 2 persons together., 2 -1 persons., 1 chrome. 12 sts left;

14r. - 1 chrome ., 2-1 persons., 2-1 persons., 2 persons ., 2-1 persons., 2 together persons., 1 chrome. 8 sts left;

15 rubles - 1 chrome ., 2-1 persons., 2 persons., 2-1 persons., 1 chrome. 6 sts left;

16r. - 1 chrome ., 2-1 persons., 2- 1 persons., 1 chrome. 4 sts left;

We close the loops.

For the second ear, through 11 loops on the bottom of the cap, we collect 22p. and knit in the same way as the first. We make laces and sew them on. We embroider a bear on the front of the hat with white threads - see diagram.

A beautiful hat for a newborn baby with knitting needles is ready.

We hope that our article with a description and knitting patterns will help you knit a beautiful and warm hat for your baby. Happy knitting!

Today we will tell you how to knit a cap for a newborn. This little thing is absolutely necessary for the baby both in cold weather and in warm weather.

Knitted cap: master class

Knitting a simple cap with knitting needles for a baby is quite easy.

For such a cap, as in the photo, you need 70 g of woolen thread No. 32, folded 4 times, and knitting needles No. 3.

  1. We collect 66 loops, then we knit a fabric with a hosiery pattern - 11 cm, then we divide the product into three equal parts;
  2. The first part - 22 loops - we knit 9 cm. Then we close the loops with one row. We knit the loops remaining on the knitting needles to the end. Then, turning the product, in the next row we again close 22 loops - but from the other side;
  3. The average 22 loops remained on the knitting needles, which we knit another 9 cm. After that, the row must be closed;
  4. The cap must be crocheted, decorated with ribbons or lace;
  5. Ties can be decorated with pom-poms.

And here is a knitting pattern:

Of course, it’s more pleasant when the baby has a lot of clothes ... To diversify the newborn’s wardrobe, I offer knitted caps to choose from, diagrams and descriptions are below.

Here is a step-by-step process for making a baby cap.

I also want to tell you how to knit a cap for a newborn with knitting needles for beginners:

The method is very easy and does not require much knitting experience. We knit a large rectangle, then sew it on both sides.

Depending on the circumference of the baby's head and the thickness of the yarn, we collect 60-70 loops. We knit with an elastic band (2 persons x 2 out.):

We knit a rectangle:

We sew the product from the inside, first the shorter sides, then we perform the back seam:

We tighten the corners of the product with laces made from yarn - like this:

A funny hat for your baby is ready:

Knitting bonnets for newborns can be a great hobby, it helps to pass the time on maternity leave to care for a baby, and for the especially enterprising, it is an option to earn money if you master the knitting technique perfectly. Here is another description of a warm knitted cap:

You will need yarn - 50 gr., Hosiery knitting needles No. 2.5, to help the knitting needles - hook No. 2.5, hook No. 4.

Elastic band: 1x1 - alternate faces. - out..

Facial surface: faces. rows - persons. p., out. rows - out. P..

Pattern "Zigzag": performed from 4 p. - according to the scheme, where one person is shown. rows (circular odd). Out. rows (circular even) are patterned. In out. rows of yarn are decorated with out. and persons. cross n. - performed out. cross p.. Repeat this pattern from the 1st to the 12th p.

The openwork row is made with an auxiliary crochet:

* 1 st.s. over 1 p of the previous row, perform 1 ch, - repeat from *

We collect 86 points and perform an elastic band - 6 cm. Then we work with a Zigzag pattern - 21 reports:

Having knitted 7 cm from the gum, we divide the loops into 4 stocking needles and continue to work in circular rows - faces. satin stitch. The first circular row - we evenly decrease 2 p. Third row - 5th and 6th, fourth row - 4th and 5th, etc. until 12 sts remain on the needles. They must be pulled together:

We crochet the bottom edge - 1 row from st. b. n .. after that - 1 row with an openwork pattern. With hook No. 4 we carry out a chain - 150 ch. - double thread, which we pass through the holes in the openwork row. Enjoy your work.

Video on the topic of the article

A hat for a newborn is not just a beautiful element of the wardrobe, but also a necessary thing. You can knit anything with knitting needles for a baby: a baby bonnet, a bonnet, a hat with ears for a baby, etc. On the Internet, you can find diagrams of such work with a step-by-step description.

A hat for a newborn is not just a beautiful element of the wardrobe, but also a necessary thing.

Knitwear for little children has always been highly valued. For such work as knitting children's hats, you need to prepare.

  • First you need to prepare the materials. You will need knitting needles, although a winter hat can be crocheted. Knitting needles are classified by size and appearance. The size of the loops depends on their width. If you choose the wrong knitting needles, it will be difficult to work with yarn, beautiful neat loops will not work. Alternatively, you can use circular needles. For beginners, they are best.

There is a standard rule: the needle should be slightly thinner than the yarn. If you follow this rule, then things knitted by the master will look very presentable.

  • When the knitting needles are selected, you can pick up yarn. A warm hat for a baby is knitted from one skein of threads. But you need to decide in advance on its design and color. It is on these two parameters that the choice of yarn depends. If you need to knit a warm winter hat, then it is better to buy woolen threads that do not include synthetic material, such as acrylic.
  • You will also need additional materials, such as scissors, to cut the thread, hook, pins and centimeter tape.
  • To get a good job, you need to take measurements correctly. The most important thing is to measure the circumference of the child's head. The size of the product depends on the number of loops cast on, as well as on the density of knitting.

Hat for a newborn 0-3 months knitting needles (video)

  • The average head circumference of a little boy is 61 cm. This must be taken into account if the product is planned to be presented as a gift.
  • Beginners are advised to take a sample before starting work.
  • It is worth paying attention to how many loops will fit in one centimeter.
  • At the end of such work, the loops must be reduced. To make it easier for yourself, their number must be rounded so that the number of loops is a multiple of 8.
  • So that the product does not stretch, you need to round to a smaller number.

Warm winter hat for a newborn baby: how to knit

Not a single child can do without warm hats in winter.

So, we knit:

  1. Loops are being picked up. In order not to make a mistake with the set, you should use the formula: the circumference of the head is multiplied by the number of loops in one centimeter.
  2. Then circular knitting needles are taken, and all the loops are connected in a circle. When casting on loops, you should be careful, because if they get tangled, then it will not be easy to fix, especially for a beginner.
  3. If something went wrong at the casting stage, for example, some loop fell out or was knitted incorrectly, it is better to unravel the yarn and start working from scratch.
  4. As you knit, the product must be tried on the baby's head to make sure that the work is going as it should. This should also be done in order to determine how many more rows to knit.
  5. At this stage, there should be a decrease in loops. To do this, every 8 loops are marked with a pin. Decrease the loop that is 2 loops before the pinned pin. As you work, each circle will decrease.

Not a single child can do without warm hats in winter

Do not be afraid to adjust the knitting needles, after decreasing the loops, this will not spoil the work in any way. The needlewoman will almost finish the work when she has no more than 4 loops on the knitting needles. From the two remaining loops, one is made. A thread is pulled through it and fastened from the wrong side with a hook or needle.

Hat for a newborn girl with knitting needles: job description

For a girl, it is best to knit a hat for the winter from pink or purple threads. Well, it's very nice! It is recommended to choose a yarn, which includes wool and acrylic. The product from it will be quite elastic and beautiful.

  1. After the measurements have been taken, you can begin to calculate the number of loops. Loops are cast on a large needle. Optionally, you can knit on circular needles.
  2. Beginners are advised to knit hats for girls with a simple knit, for example, hosiery. This is when both the front and back rows are knitted in the same way, that is, all loops are knit.
  3. As you knit, the loops decrease.
  4. You can alternate different colors of yarn to make the product look prettier. For example, one stripe can be made white and the other pink.

When there is one loop left on the needle, you will need to stretch the thread through it.

Hat for a newborn boy: a simple scheme

For a boy, you can choose any color of yarn, for example, brown, gray or white. You can combine colors. For those who will knit a hat for the first time, it is better to take one-color yarn.

  1. Measurements are taken from the baby. Loops are typed taking into account the circumference of the baby's head and the number of loops in one centimeter of yarn.
  2. It is necessary to tie a small elastic band up to 2-4 cm. The scheme is simple: 2 facial loops should alternate with 2 purl loops. But you need to take into account that, on the other hand, the loops should be knitted the other way around.
  3. After the elastic, stocking knitting continues until it is necessary to decrease the loops. It is recommended to occasionally try on the baby's hat to make sure it will fit well.
  4. Remove loops. A thread is threaded through the last loop, which is attached to the product from the wrong side.

You can mix colors or take just one.

Hat-bonnet for babies step by step

Such a product will protect the child from the winter cold, suitable for discharge.

So, the work is as follows:

  1. First knit a scarf. It is necessary to knit the initial chain. Loops are recruited taking into account the measurements taken.
  2. The method of knitting a hood for beginners is hosiery. But there is another option: one row is knitted with air loops, and the other with facial loops. The rows alternate, and the yarn is elastic and very warm.
  3. At the end of each row, knitting must be turned over.
  4. The hood is then attached to the scarf. To do this, from the wrong side of the last row of the hood, you need to pick up loops and continue knitting in the same way.
  5. When a sufficient amount of yarn has been knitted, the loops will need to be reduced.

Such a product will protect the child from the winter cold.

At the end of the work, the seam should be smoothed out.

How to knit a cap for a newborn with knitting needles?

First you need to decide on the size of the cap. Then the yarn is selected. After that, you need to take measurements from the baby’s head, the main thing is to measure the circumference of the head.

  1. The cap is the easiest to knit. The method of knitting is hosiery. Elastic band in such a product does not fit. After a set of loops, you can start knitting, knitting each loop in the front way.
  2. The easiest way to knit a cap on circular needles.
  3. You need to decrease the loops when the product is almost knitted to the crown. The loops are removed evenly, in each row.
  4. At the end of the work, one loop should remain, through which the thread should be pulled. It needs to be fixed from the wrong side.

Hat with ears for a newborn from 0 to 3 months with knitting needles (video)

These are not all ways of knitting children's hats. There are a lot of ideas that allow you to create beautiful works for kids with your own hands. In the cold season, a baby needs a hat, so why not make it yourself?

Other knitting patterns

What a strange superficial description. There is no main scheme of the pattern, a transition from the front to the back. There is no decrease principle, for example, in each row, remove 5 loops for rounding or even more,

A bonnet is an integral part of any newborn's wardrobe, because protecting the head and delicate fontanel is a paramount task that these special headwear with ties allow you to perform. Such hats for newborns can be purchased, or you can knit with your own hands using knitting needles. This is what we will do, and diagrams and descriptions will help in this.

How to tie a cap for newborns: diagrams with a description

There are many models of bonnets, as well as ways to knit them. You can knit a simple cap, or you can decorate a baby hat for newborns with ruffles, ears, pompoms. The choice of yarn when knitting a cap for babies is also very important: the threads should be natural, but should not float and prick. It is important to remember that under a cap made of woolen yarn, you still need to put on another cap - made of fine cotton.

Master class for beginners

Knitting a bonnet for beginners should be fun, so the best option is to start with a simple model. Consider how a bonnet for newborns is knitted with knitting needles from 0 to 3 months. However, if you recalculate the loops, you can tie one for older kids.

The main part of the bonnet is knitted with a simple openwork pattern according to the pattern scheme, but other openwork patterns of fine knitting or the front surface can be used. On the edges of the bonnet there is a finishing strap knitted with a garter stitch. Yarn cords are used as ties.

Size:

for a head circumference of 38 cm.

Materials for work:

  • yarn (50% wool, 50% acrylic, 392 m / 100 g) blue - 25 g;
  • knitting needles number 2 and number 2.5.

Knitting density of the main knitting:

Pg \u003d 2.18 loops in 1 cm.

Pattern scheme and knitting method:

The rapport of the pattern is four loops in width and eight rows in height. For a pattern sample, a number of loops is dialed on the knitting needles a multiple of 4 plus 1 loop and plus 2 edge loops.

1st and 5th row: all loops are facial;

Row 2 and all even rows: all loops are purl;

3 row: knit 2, * yarn over, knit 2 loops together with a slope to the right, knit 2 *, yarn over, knit 2 loops together with a slope to the right, knit 1;

7 row: 2 front, * 2 front, yarn over, knit 2 loops together with a slope to the right *, 3 front.

Ninth row knit in the same way as the first and so on.

Loop calculation:

The method of knitting this cap provides for a head circumference of 38 cm - approximately at the age of 1 month. However, head circumference in children varies widely. If you are knitting a cap for discharge, knit a smaller cap. The average head circumference in children at birth is 34.1 cm.

In order for the bonnet to fit the baby in size, it is imperative to knit the sample with the main knit (in this case, it is a simple openwork knit), and determine the knitting density. In our case, the horizontal knitting density (Pg) is 2.18 loops in the 1st cm. We will knit a bonnet for a head circumference of 38 cm. In the calculations we will use a measure in half size, half head circumference: Head = 19 cm.

Cap pattern:

Let's start knitting from the face (line AB). Segment AB is calculated by the formula:

AB \u003d 1.5 x Sgol + Pr \u003d 1.5 x 19 + 6 \u003d 34.5 cm,

where Pr \u003d 6 cm is an increase, the same for all sizes.

Now we count the number of loops that need to be typed on the knitting needles. It is equal to: AB x Pg + 2 edge loops = 34.5 x 2.18 + 2 = 78 loops (round up to even). Pg - horizontal knitting density.

Part width (segment AA1 = BB1):

AA1 \u003d 0.5 x Sgol + Pr \u003d 0.5 x 19 +2 \u003d 11.5 cm.

Pr - increase, equal to 2 cm for all sizes.

Neck Width (DS)

DS \u003d 0.5 x Sgol \u003d 0.5 x 19 \u003d 9.5 cm. Determine the number of loops: 9.5 x Pg \u003d 9.5 x 2.18 \u003d 20 loops (round up to even).

Progress:

We collect on the needles (No. 2) 78 loops and knit a bar 2 cm wide (10 rows) in garter stitch. Next, we switch to knitting needles No. 2.5 and knit 9.5 cm with the main viscous (33 rows). We make out the edge loops with a pigtail.

We distribute 78 loops into three parts so that in the middle we get 20 loops (occiput). The side parts are obtained in 29 loops. The occipital (central) part will be knitted with front stitch. In the 34th row (wrong side), we begin to knit the back of the head of the cap in the same way as the heel at the toe. We continue to knit the loops of the central part further, and gradually reduce the loops of the side parts, attaching them to the loops of the central part. So, we knit the loops of the first and central parts. We knit the last loop of the central part of the classic wrong side together with the first loop of the third part and turn the work over to the front side. When turning, we remove the first loop as a hem loop for the front wall, the thread at work, the movement of the knitting needle from ourselves (from front to back). On the front side, we knit the last loop of the central part together with the first loop of the side part of the front. An important nuance: we knit these loops behind the back wall (“grandmother's” front loop). We turn the work inside out and remove the hem for the front wall, the thread before work, the movement of the knitting needle from ourselves (front to back). Thus, we knit the loops only of the central part and reduce the loops from the side parts.

At the bottom, the occipital part narrows by 1 - 1.5 cm on both sides. In our case, this is 3 loops on both sides. Having connected half of the back of the head, we will make uniform decreases in the front rows. We decrease the loops by knitting two loops together with a slope to the right at the beginning (after the first loop) and at the end of the row (before the last loop). The photo shows the rows in which we make decreases.

Having connected the back of the head, we break the thread, transfer the open loops of the central part to an auxiliary knitting needle or pin. We take knitting needles No. 2 and knit a bar along the bottom of the cap in garter stitch. We raise the loops of the side parts, one from each edge. The width of the bar is according to the model. We have about 1.5 cm, these are 7 rows. Now you need to make ties. You can watch the master class "How to make ties for a hat." In our case, the finished tie is 25 cm, the thread is 6 additions. For one tie, you will need three threads 75 cm long.

For girl

Among the many models of bonnets for girls similar to each other, one can single out a method that allows you to get an interesting result, namely, a combined type of knitting: knitting and crocheting. This method allows you to get a really beautiful hat for newborns, combining simple knitting with knitting needles and beautiful crochet openwork motifs. For this, a master class on knitting a bonnet with knitting needles for a girl, described below, is useful. A cap for a newborn with knitting needles with a description is useful for both beginners and experienced knitters.

Size:

0 (3) 6 (12) months.

Materials for work:

  • yarn Phildar Partner Baby (50% polyamide, 25% wool, 25% acrylic; 192 m / 50 g) - 1 (1) 2 (2) skeins of light yellow (POUSSIN);
  • knitting needles No. 2.5;
  • hook number 2.5.

We knit the front surface:

Knit (needles No. 2.5): front rows - front loops, back rows - back loops.

Knitting density
33p. x 44r. = 10 x 10cm.

Pattern:

Progress:

On knitting needles No. 2.5, dial 118 (124) 130 (138) sts and knit the front stitch.

After 8.5 (9.5) 10.5 (11.5) cm = 38 (42) 46 (50) p. from the initial row close on both sides 1 x 48 (49) 51 (51) p. = 22 (26) 28 (36) p.

Then add in each next 2-mr. 5 x 1st (5 x 1st) 4 x 1st (4 x 1st), then in each next 4-m. 2 x 1 stitch (2 x 1 stitch) 3 x 1 stitch (3 x 1 stitch) = 36 (40) 42 (50) stitches

Link 6 (6) 6 (8) p. straight and close on both sides 1 x 1p., then for the 1st size: in each next 6-mr. 3 x 1p., in each next 4-mr. 3 x 1p.; for other sizes: in each next 6-mr. 4 x 1p., in each next 4-mr. 2 x 1p. = 22 (26) 28 (36)p.

Through 21.5 (23) 24.5 (26) cm = 96 (102) 108 (114) p. from the initial row close all the loops.

Triangle (5 parts)

With hook No. 2.5, make a chain of 8 ch, close into a ring with 1 conn. Art. in the 1st v.p. and knit in rounds.

1st row: ch 2 lifting instead of the 1st p / st. and 17 p / st., Inserting the hook into the ring (= 18 p / st.). Finish 1 conn. Art. in the 2nd v.p. lift.

2nd row: 3 vp lifting instead of the 1st tbsp. s / n and 2 tbsp. s / n, tied together (= 3 st. s / n, tied together at the beginning of the row), 5 ch, * 3 st. s / n, connected together, ch 5 *, repeat only 5 times from * to *. Finish 1 conn. Art. in the 3rd v.p. lift.

3rd row: 3 conn. st. to start from the middle of the arch of 5 ch. previous row, * 1 tbsp. with 2 / n (= 4 ch lifts instead of the 1st st. with 2 / n), 5 ch. and 1 tbsp. from 2 / n into the central loop of the arch from 5 ch, 6 ch, 1 tbsp. b / n into the central loop of the next arch from 5 ch, 6 ch *, repeat only 3 times from * to *. Finish 1 conn. Art. in the 4th v.p. the beginning of the row.

4th row: 1 connection Art. to start with an arch of 5 ch. of the previous row, * in an arch of 5 ch. tie: 3 tbsp. s / n, connected together, 5 vp, 3 tbsp. with 2 / n, connected together, 5 v.p. and 3 st. s / n connected together; then 5 vp, 1 tbsp. s / n, 2 vp and 1 tbsp. s / n in Art. b / n, 5 cp *, repeat only 3 times from * to *. Finish 1 conn. Art. in the 3rd v.p. the beginning of the row.

5th row: 1 vp lifting instead of 1 tbsp. b / n in each v.p. or Art. s / n and 3 tbsp. b / n in 3 tbsp. with 2/n connected together. Finish 1 conn. Art. in v.p. lift and finish the job.

Half triangle (2 parts)

With hook No. 2.5, make a chain of 6 ch, close 1 conn. Art. in the 1st v.p. and knit in rows in the forward and reverse direction.

1st row: ch 2 lifting instead of the 1st p / st. and 10 p / st., Inserting the hook into the ring (= 11 p / st.).

2nd row: 3 vp lifting instead of the 1st tbsp. s / n, 2 vp, * 3 tbsp. s / n, connected together, 5 v.p. *, repeat only 2 times from * to *, 3 tbsp. s / n, connected together, 2 v.p. and 1 tbsp. s / n in the 2nd vp from the beginning of the previous row.

3rd row: 5 v.p. lifting instead of the 1st tbsp. with 3 / n, 2 vp, 1 tbsp. from 2 / n in Art. s / n of the previous row, 6 ch, 1 tbsp. b / n in the central loop of the arch from 5 vp, 6 vp, 1 tbsp. from 2 / n, 5 v.p. and 1 tbsp. from 2 / n into the central loop of the arch from 5 ch, then 6 ch and 1 tbsp. b / n in the 3rd v.p. the beginning of the previous row.

4th row: 3 vp lifting instead of the 1st tbsp. s / n, 1 vp, 1 tbsp. s / n in Art. b / n of the previous row, ch 5, in an arch of ch 5 tie 3 tbsp. s / n, connected together, 5 vp, 3 tbsp. with 2 / n, connected together, 5 v.p. and 3 st. s / n, connected together, then 5 vp, in art. b / n tie 1 tbsp. s / n, 2 vp and 1 tbsp. s / n, then 5 vp, 3 tbsp. s / n, connected together, in an arch of 2 ch, 5 ch and 2 tbsp. with 2 / n, connected together, in the 5th v.p. the beginning of the previous row.

5th row: 1 vp lifting instead of 1 tbsp. b / n, 1 tbsp. b / n in 2 tbsp. with 2 / n, connected together, then 1 tbsp. b / n in each v.p. and Art. s / n and 3 tbsp. b / n in 3 tbsp. with 2/n tied together and finish the job.

Assembly

Parts are slightly moistened, stretched according to the dimensions indicated on the pattern and allowed to dry. Sew the back seam of the hat.

Tie 3p. Art. b / n crochet No. 2.5 along the edge around the face. With hook No. 2.5, tie the edge along the neck of the cap and perform the ties as follows: perform a chain of 63 ch, then 1p. Art. b / n along the edge of the neck of the cap and complete a chain of 63 ch, then tie 3p. Art. b / n on all loops.

Sew 5 triangles in a checkerboard pattern to make a plank and 2 halves of a triangle from each edge. Sew the placket to the cap with a hidden seam. At the end of the work, all the seams are lightly steamed.

For boy

For boys, you can also knit a beautiful cap. Applying an interesting pattern of knitting a pattern and successfully choosing yarn, you get a real work of art. We will figure out how to knit a cap for a newborn with knitting needles quickly and with pleasure.

Size:

0-3 months.

Head circumference:

Materials for work:

  • 1 skein of AlizeBabyWool (40% wool, 40% acrylic, 20% bamboo, 50g/175m);
  • circular and stocking knitting needles 2.5 mm.

Important: slip edge loops at the beginning of the row and purl at the end of the row.

Progress:

Main part

Cast on 85 sts with circular needles.

Knit with an elastic band 1 * 1 with edge loops - 2.5 cm.

1st row(front side): chrome. loop, knit facial to the last loop, chrome. a loop.
2nd row(outside side): chrome. loop, knit purl to the last loop, chrome. a loop.
3rd row(persons side): chrome. loop, * 1 person., 1 out., repeat from * to the last 2 loops, 1 person., chrome. a loop.
4th row(persons side): chrome. loop, * 1 out., 1 persons., repeat from * to the last 2 loops, 1 out., chrome. loop - i.e. knit loops in a pattern.

Occipital part

1st row(outside side): chrome. loop, 55 out., 2 together out., turn the work.
2nd row ( persons. side): remove the loop, 27 persons., 2 persons together., turn the work.
3rd row(wrong side): remove work, 27 out., 2 together out., turn the work.
4th row(person. side): remove the loop, 27 persons., 2 persons together., turn the work.
Repeat rows 3-4 until dec 12 sts on each side of center 29 sts = 16 sts left on each side.

1st row(purl side): slip a loop, knit purl to a decrease loop, purl 2 together, turn the work.
2nd row(person. side): remove the loop, 1 person., 2 persons together. left, knit to last 3 sts before dec, k2tog. to the right, 1 persons., 2 persons together., turn the work.
3rd row(wrong side): slip work, purl to dec, purl 2 together, turn work.
4th row(right side): slip a loop, knit to a decrease loop, knit 2 together, turn the work.

Repeat 1-4 rows, thus, in addition to the side loops, decreasing the central loops in each 4th row, until there are 13 loops in total on the knitting needles.

Break and hide the thread. Slip stitches onto extra needle.

Bottom binding

Pick up 22 loops along the bottom of the cap to the postponed loops, knit 13 faces. sts from additional needle, pick up 22 sts on the other side along the bottom of the cap = 57 sts on the needles.

Knit stitches with front stitch, starting from the wrong side - 7 rows.

Track. row (person. side): out. loops.

Knit again with the front surface, starting from the wrong side - 8 rows.

Wrap the knitted edge to the wrong side, hem, at the same time closing the loops.

Ties

With stocking needles, pick up 5 loops.

Final works

Hide the ends, steam the back of the hat (do not steam the main pattern!).