What can you use to make a Christmas tree for the street? Creative DIY Christmas tree from scrap materials. Christmas trees made from wrapping paper

The original beautiful Christmas tree will decorate the festive interior. Of course, you can’t dance around her, but such a miracle will definitely lift your spirits. This interesting tabletop craft can be made from the simplest things that are found in every home.

Necessary materials:

A4 sheet, cardboard;
dense threads (preferably wool mixture);
2 “yolks” from kinders;
wooden sushi sticks;
plasticine;
Styrofoam;
stationery knife;
stroke corrector;
red nail polish;
PVA glue;
fabric scraps;
little things for decoration.

Make the frame of the future Christmas tree from A4 sheet - roll it into a ball. Insert foam inside.

Apply glue to the surface of the cone in thin strips and wind a thread around it.

Secure the end of the thread with glue.

Sushi chopsticks will serve as legs for our beauty. To do this, they need to be painted with a corrector.

While they are drying, make boots from the “yolks”, as shown in the photo.

Fill them halfway with plasticine and wrap them in cloth.

Insert the stick legs into the boots, decorate the Christmas tree with various bows and ribbons. Paint stripes of legs with red varnish. ready!

You can make a hat out of cardboard, cover it with fabric and sew on a pompom.

DIY shabby chic style Christmas tree

Let's make such an amazingly beautiful and original craft in the fashionable shabby chic style.

Necessary materials.

For the base, take a large paper glass or any plastic container. Separately, dilute alabaster or gypsum with water to the thickness of liquid sour cream and pour it into the future pot. We secure the trunk of our tree, plant the branch in the center and fix it in this position until it hardens.

We make a cone out of cardboard using a stapler.

We make the top of the spruce from wire and foam rubber.

We connect the top to the trunk and attach the cone.

We wrap the base of the tree with white fur.

We cut off the excess from below.

Then we bend the ends of the burlap inward and attach it with hot glue.

Let's get to the fun part - decorating our Christmas tree in shabby chic style.

To create the finished composition we will need a stand.

We make a bench from a bamboo napkin.

From white fur - a snowman.

We attach a bell to the top of the spruce.

We decorate the New Year tree with beads, pearls, flowers, lace, etc.

Apply transparent glue to the very top of the tree.

And sprinkle with artificial snow.

We do the same with the bench.

Our composition “Winter's Tale” is ready!

Decorative Christmas tree made from napkins

We will make it from cardboard and single-layer napkins. You will also need beads for decoration.

First of all, let's build a frame for our Christmas tree. We roll a cone out of cardboard, fasten it (I stitched it with thread) and cut off the bottom of the cone exactly so that it can stand.

The base is ready, put it aside for now. Now let's move on to napkins. We will make roses from them. Single-layer plain paper napkins are suitable for us.

Take a napkin and cut it along the folds. Then we fold it in three and cut along the folds again.

We fold the resulting strips in three and cut them again. We got a square equal to 1/9 of a napkin.

We fasten this square in the center with a stapler.

Then cut a circle out of it. Mega-precision and accuracy are not required here at all; the finished rose can be slightly adjusted with scissors.

This way a rose is formed. If the finished rose seems uneven to you, you can trim it with scissors.

The number of such flowers depends on the size of your cardboard cone. My Christmas tree was 21cm high and I needed 59 roses for it.

When all the flowers are ready, we return to the cone. Starting from the top of the head, glue the flowers onto the cone so that the base is not visible. I glued it with hot glue (it’s more convenient for me), but ordinary PVA will do.

I made a Christmas tree out of napkins of two colors. If you also decide to create your own craft from multi-colored roses, then you can safely experiment with alternating them on a cone. If the result does not suit you, you can always tear off the flower and re-glue it to another place. In this case, only the lower layer of the flower will be damaged. We simply tear it off (the bottom layer). The rosette will not lose its appearance.

So, we glued the flowers to the cone. The Christmas tree itself is ready and you can stop at this stage.

I also decorated it with beads - I glued it with the same hot glue, PVA won’t help here.

DIY decorative Christmas tree made from napkins

As you can see, even a beginner can make such beauty, so you can safely involve children in the process.

Another option for a Christmas tree made from napkins

Crafts made from cones, balls, ribbons and beads

How to make such a craft - watch the video tutorial at the end of the article.

Christmas tree made of plasticine with candies

What do we all associate with the wonderful New Year holiday? With the smell of pine needles, bright lights, garlands, sweets. And children also create unusual crafts with their own hands, thereby bringing the pleasant moment of a fabulous night closer. They love creativity lessons on this topic most of all. It is in crafts that you can realize any fantasies.

We suggest making an elegant Christmas tree that can be easily decorated with candies. Make a craft from plasticine - the cheapest and most popular material. You will definitely make a beautiful souvenir if you follow our tips - they are not complicated.

To sculpt a Christmas tree with your own hands, prepare:

green plasticine for the crown;
stump in the form of a cap or an empty spool of thread;
toothpick, red and white plasticine for candy.

Select a green block of plasticine from the set. The body of the Christmas tree itself will be made from it, and in the future we will make small candies as toys. Of course, a small souvenir does not have to be green; another color that you choose will do. If you manage to find a set on sale that contains a gold bar, then this option will look rich.

Knead the entire prepared block thoroughly in your hands and prepare for further work. It is necessary to form a cone-shaped crown, and not quite the usual flat one, but a curved one, similar to the cap of a fairy-tale gnome. Since we are talking about a magical holiday, it is not forbidden to fantasize and create something incredible.

Pull all the soft plasticine into a long cone. Make the upper part as sharp as possible, press the lower part around the circumference with your fingers, showing the skirt. Then take and bend the entire structure to the side. Sometimes the Christmas trees do not stretch up perfectly straight, but lean to the side like this.

To model Christmas tree decorations - small candies - use white and red plasticine. Form red round tablets (the inner part of the candy), as well as white triangles (the twisted part of the candy wrappers).

Glue delicious candies together. Glue a white dot onto each red round piece and press it in the center with a toothpick. Glue the triangular pieces on the sides.

Make enough decorative details to fill the entire surface of the Christmas tree, evenly distributing the candies around the circumference at some distance.

Glue all the resulting blanks to the crown. This beautiful New Year's craft is almost ready. Press down a small lid - a stump - from below (or mold it from plasticine).

And the top is still missing. She just begs to be added to the resulting fairytale Christmas tree. Come up with some option, for example the same spruce branches in combination with red berries. All this looks festive and bright.

This is such a fantastic Christmas tree. This is an elegant version of a craft for the New Year, which will be an excellent gift for your favorite holiday.

The New Year is just around the corner - you need to hurry up to get everything done.

How to make a card like this.

DIY felt Christmas tree

Let's make Christmas trees from felt - this is an excellent New Year's decoration and perfect for school or kindergarten.

Prepare for them:

Set of colored felt;
cotton wool;
glue "Moment" transparent;
any beads;
threads for knitting and sewing;
a needle;
scissors;
felt-tip pen.

Choose appropriate felt colors. These can be different shades of green. Or you can show your imagination and make an unusual red or blue spruce. Fold a couple of sheets of felt together and draw the shape of a fir tree on the top one.

Cut a piece of felt with a pattern along its entire length and fold it in half as shown in the photo. We do this only if the felt is not very thick, otherwise it will be difficult to cut 4 layers at once.

Cut 4 blanks into shape.

To give them a bulge, put a little cotton wool, as shown in the photo.

Lubricate the edges of the workpiece with glue.

Cut a piece of knitting thread and attach it to the top of the workpiece, directly on the glue. It can be hung from it. Attach the second piece and press along the edge so that both parts stick together.

On a light Christmas tree, make stitches with threads of a darker green color. This will add originality to the craft.

Decorate the second with a border of pearl beads. To do this, make a layer of glue along the edge and place beads on it.

Now let your little one decorate them however he or she wishes. After drying, the craft is ready for use.

This simple craft will be a great decoration for your Christmas tree. It can be given to grandparents. Older children will be able to do it completely on their own. Using this principle, you can make any felt decorations. Whatever your imagination suggests.

From natural materials with flowers from foamiran, do-it-yourself video lesson

Christmas tree sachet - to create a festive aroma

A sachet is a small bag filled with dry fragrances that is used to create a fragrant background in a clothes closet or chest of drawers. If you place such fragrant bags on shelves with things, a pleasant and subtle smell will settle in your closet.

Making such a sachet with your own hands will not be difficult, and if you create it in the form of a New Year tree, then in addition to the aroma, the festive composition will also set the appropriate mood.

Materials for the master class:

Citrus peel;
orange essential oil;
threads, needle;
beads, beads, sequins;
satin ribbon;
green cotton fabric;
scissors and pencil.

Draw a spruce template on a piece of paper and cut it out.

Finely chop the citrus peel, and to add a greater aroma, you can also add a few drops of essential oil.

From thin green cotton fabric, cut out two blanks according to the template, fold them with their right sides inward and baste.

If possible, sew and finish the edge on a sewing machine; if this is not possible, process the edges by hand.

Turn out.

Make a loop from a silver thread with a voluminous knot at the end, using a needle or hook, thread the loop into the top of the spruce.

Tie a satin ribbon into a bow and secure it at the top with a couple of stitches.

We fill the craft with aromatic citrus peels and sew up the edge.

If desired, you can decorate the sachet tree with your own hands with various beads and sequins.

Our affordable and easy-to-make sachet is ready, now its aroma will delight you, and its beautiful appearance will give you extraordinary and festive energy.

Photo of Christmas tree sachet with orange scent

Christmas tree toy made from pasta

In the fall, you increasingly begin to think about the coming of the New Year with its festive mood, meetings with friends and family and, of course, gifts. In addition, since childhood, we have all associated the New Year with the Christmas tree! That's what we'll talk about)

Fortunately, people are increasingly thinking that it is not worth cutting down a live Christmas tree for the sake of a few holidays. Krestik and I fully support this decision and believe that a DIY Christmas tree is much more interesting and humane! In addition, these are excellent options for those who have nowhere to put a large Christmas tree (for example, there is no free space, or there is an active small child in this free space).

We bring to your attention a large selection of master classes on creating a decorative Christmas tree with your own hands, which will serve as a wonderful decoration for your home and an original gift for a wonderful holiday!

Christmas tree made of pine cones

You can make a very original Christmas tree with your own hands from pine cones. But we will not use the whole cones, but will use only their scales so that the tree is not too bulky.

So, first, let's separate its scales from the cone. This can be done with a sharp knife, wire cutters or pruning shears.

Be careful, take care of your hands!

The next step is to make a cone from thick paper or cardboard, which will be the base of our Christmas tree. We roll the paper into a cone, glue it on the sides and cut off the excess at the base.

Then we simply take the scales in our hands and glue them in a circle, starting from the base of the cone.

You can glue each new row in a checkerboard pattern, or, like here, on top of each other.

You can glue a clove to the top of the tree (such a spice))

After the glue has dried, you can start painting our beauty. To do this, you can use spray paint or regular acrylic paint.

If you choose acrylic paint with a metallic effect, your Christmas tree will look much more impressive.

Then we cover the ends of the “twigs” with PVA glue and sprinkle glitter on them.

This is the beauty that results from these simple actions:

Using exactly the same principle, you can decorate the cone with chains and beads, decorative cords, ribbons, braid, etc.

Another very popular way to make artificial Christmas trees with your own hands is to weave them from beads. This is perhaps the most painstaking method, but for lovers of beadwork nothing is impossible!

The detailed process of weaving Christmas trees from beads cannot be contained in one article, so we are sharing with you links to master classes previously published on Krestik.

Christmas tree made of paper and cardboard

If you have nothing to do at work) or just want to add a little holiday to the office, make a Christmas tree out of paper. What's easier?)

And this tree is very similar to a designer one, don’t you think? It’s all because of colored designer cardboard, which is so beautiful and bright that you don’t even need to decorate the Christmas tree with anything else), which simplifies the process of making a Christmas tree with your own hands.

Secondly, to make a designer Christmas tree, you can use threads that are wound on a paper cone using the technology of making openwork balls.

Thirdly, flower net and bouquet net.

The technology for making these three Christmas trees is very similar, so the process of creating them is shown in one master class.

Feather Christmas tree

Yes, they do too! Feathers can be bought at hardware stores, or maybe you have supplies of bird feathers? For brightness, they can be painted with food coloring. It looks original, beautiful and so airy!

If you look closely, the cone is a small Christmas tree. At least if you paint it green and “plant” it in a small pot. And if you add another star on top, you’ll get an original New Year’s decoration for your desktop.

Christmas tree made of corrugated paper

Fluffy and elegant - this is how you can describe this cute Christmas tree made of corrugated paper in a nutshell. All you need to create it is a cardboard base, green corrugated paper and scissors. We cut the paper into strips, make a “fringe” out of them and paste them onto the base. The Christmas tree is ready.

Christmas tree made of beads

“They hung up the beads and began to dance in a circle...” And if you cover the cone with beads, you will get a luxurious Christmas tree. At the same time, you can choose any color to suit any interior. It is also impossible not to note the simplicity of creating such a Christmas tree. Judge for yourself – master class.

Christmas tree from a tripod

Photographers will surely like this Christmas tree. Beautiful and practical. And even though there are no needles on it, and it doesn’t smell like pine, you can’t deny its originality. In addition, a creative person will fill in all the missing details in his imagination.

Christmas tree made from wine corks

You already know that you can make at least a Christmas tree out of wine corks. In this case, as you can see, various variations are possible.

Christmas tree made of snowflakes

The Christmas tree can not only be placed, but also glued. Of course, if it consists of paper snowflakes. An excellent option for decorating shop windows and windows. You'll find the snowflake cutting templates you'll need to assemble your Christmas tree.

Christmas tree made from leftover wrapping paper

This option is not only beautiful, but also economical. When packing New Year's gifts, you will probably end up with scraps of wrapping paper. Don't rush to throw them away. Roll them into tubes of different lengths and you will get a funny Christmas tree.

Christmas tree made from pasta

Figured pasta, paint, glue, a cone for the base and imagination - all you need to make a Christmas tree. Silver and gold ones look simply luxurious, green ones are simpler, but still very pretty.

Christmas tree made from old CDs

Disks are gradually dying out - they have been replaced by more convenient and capacious media. Everyone has unwanted CDs lying around in their closet. Take them out and make a cool IT tree. The discs twinkle beautifully in the light of the garlands and create a festive atmosphere. Scheme of such a Christmas tree.

Christmas tree made of feathers

This Christmas tree is very airy, as if powdered with fluffy snow. It will become an exquisite decoration for any interior and create the atmosphere of a fairy tale. Detailed instructions (+ video) for making it are available. Feathers can be purchased at any store that sells craft supplies.

Christmas tree made of ribbon

Such a fluffy and elegant Christmas tree is made from shiny ribbon. You just need to properly secure it around the cone-shaped base and decorate it a little. Detailed master class at the link below.

Christmas tree made from old newspapers

An old newspaper is priceless during the New Year holidays. You can use it to clean the herring for the salad and make a Christmas tree out of it. And what a one! Snowy and sparkling. But the main thing is that such a Christmas tree is made quickly and simply.

Christmas tree from boxes

This option is ideal for the office, and will also appeal to environmentalists who believe that the mass cutting down of Christmas trees on New Year’s Eve is barbaric. This cardboard beauty is quick and easy to make. Scheme and detailed tutorial. Even in a “gray” version, such a Christmas tree looks nice, but if you add a little more tinsel and other decorations, it will be completely festive.

Strawberry tree

Another delicious option for a New Year tree is strawberry. You can make it by dipping strawberries into chocolate and “gluing” the berries onto it to a cone-shaped base. Such a Christmas tree will become the star of the festive table, because strawberries in the middle of winter are almost exotic, and besides, they go well with champagne.

Christmas tree made of flower mesh

To make such a holy Christmas tree you will need: a wire frame, toys made of thin colored wire, a garland and a flower net. The algorithm of actions is intuitive, but if you want to get acquainted with the full master class, follow the link below.

Christmas tree made from Christmas toys

Today, plastic Christmas tree toys are common, from which, by the way, you can make a Christmas tree itself. You can glue the balls to each other, or you can hang them in the form of a cone - it all depends on your taste. In any case, the design will be light and safe - plastic toys will not break and the Christmas tree will serve you for many years.

Christmas tree made from a champagne bottle

This is not just a Christmas tree - it’s 2 in 1. On the one hand, there is a Christmas tree that can be placed on the festive table and, thereby, decorate it. On the other hand, there is packaging for champagne, which turns it from simple into an exquisite gift. A master class on creating this Christmas tree is located.

Christmas tree made of candies

Sweet tooths will appreciate it! Using a cone, double-sided tape, truffles and decorations, you can make a sweet Christmas tree that you won’t be ashamed to give as a gift and won’t mind eating. This is a great idea for a New Year's gift or addition to it.

Christmas tree made of wire

You can make a designer Christmas tree from ordinary copper wire twisted into a spiral. And it won't take more than 5 minutes. But it looks very modern and even somewhat philosophical. After all, the spiral symbolizes time, and the New Year is its new turn.

Christmas tree made of pillows

An option for lazy people, that is, for all of us. :) No need to bother with toys or a stand - stack the pillows on top of each other, and you're done. But the most important thing is that the wife will not nag - “Take out the tree - tomorrow is March 8th!”

More original ideas ↓

Good day, friends!

Soon, soon New Year!
He's in a hurry, he's coming!
Knock on our doors:
“Children, hello, I’m coming to see you!”
We are celebrating the holiday
Decorating the Christmas tree
Hanging toys
Balloons, crackers...

This is how I decided to start today’s post in an unusual way. Which will be dedicated to making them at home. After all, we all traditionally love to give them for the New Year. Namely, I suggest making a Christmas tree from what you have on hand. It can be anything, for example, paper, cotton pads, dry twigs, etc. After all, we all dream of surprising our loved ones with something special and unique. Therefore, if you are still thinking about what to give to mom, dad, etc. then you have a ready-made solution).

Of course, every home on New Year's Day has a brightly decorated living “forest beauty” that flickers and blinks with multi-colored lights. I suggest making a “little friend” so that she doesn’t get bored. And behind one, your decor in the rooms will be transformed, or perhaps you will place it on the holiday table.

In addition, this creative work will bring a lot of positive emotions and will delight children. Moreover, the winter evenings are long, and you can afford to create something beautiful and green).

Although it doesn’t have to be exactly this color, white is also in fashion. The tree will look as if it is covered in snow or frost.

I’ll start with perhaps the most grandiose and magical tree in my opinion. I suggest you look and study these instructions in order to create such a funny and cheerful beauty for yourself or someone else as a souvenir. The work is made of sisal, who does not know this coarse fiber of a tropical plant.

On a note. A special feature of this craft is the presence of funny legs instead of a stand. And if you remove them, you get topiary, which can be made from any material, for example, coffee beans or thread.

Well, take action by looking at these pictures and detailed descriptions.

We will need:

green sisal – 25 g
Kinder Surprise cases
heat gun
Styrofoam
wire
green pencil - 2 pcs.
colored paper
green threads
decorative braid
any decorations such as balls, beads, etc.
cardboard

Stages:

1. Take the Kinder case and cut off the lid. For the small part, cut off a small section on one side with a semi-oval, so that you can glue it together later.

2. Using a glue gun, glue the two parts together. This is how the boot will turn out, top top.

3. You should end up with two identical shoes. Make a hole in the largest bottle opener. Have you guessed what it is needed for?

4. Now let’s decorate the shoes. To do this, take a red sheet and cut out two strips 19 cm long and 2 cm wide.

5. Glue the longest strip, wrapping it completely around the shoe and giving it the desired shape.

6. Then glue decorative tape along the entire diameter of the sole for a beautiful appearance.

7. Then take your pencils.

8. Poke them into the prepared holes, and add a little glue so that they hold tightly. The legs are almost ready.

9. All that remains is to decorate them with tinsel, do as shown in this photo below.

11. This is what should come out. What does it remind you of already?

12. Now take the wire and insert it into the tip of the cone. Wrap it in sisal too and tie it with thread.

13. The next step is to make a skirt for the stomper. To do this you need to make pounds. Make rectangles of fabric measuring 10 cm x 9 cm, their number should be from 60-80 pieces. depending on the fullness of the skirt.

14. Then start gluing with a hot-melt gun. In this order. Bend the rectangle in half, but along an oblique line. Secure with glue.

16. Then lift the right edge and glue it together.

17. The funnel is ready. It's really a funny name, even a little funny.

18. Then start assembling the Christmas tree. Glue the blanks in a circle.

19. To create a skirt later.

20. Insert the legs into the base.

21. Then use your imagination and get creative, glue on various kinds of decorations.

22. Glue a bow with beads to the top of the spruce and wrap it around the craft.

23. There will also be snowflakes and rhinestones here. Place the resulting masterpiece on a stand. Good luck.

How to make a voluminous Christmas tree out of paper at home

I think that many have ever thought about this question. After all, schools and kindergartens often give assignments on this topic. I suggest making, for example, a silhouette Christmas tree. To do this, take this sample and print it on office colored sheets.

Afterwards, cut out with a stationery knife and glue the blanks together. Use special clamps for this.

You can make a whole forest of such colorful coniferous beauties.

The following work will be completed in 5 minutes. Don't believe me? It couldn’t be simpler; you will need circles of colored double-sided paper and a pencil on a stand. The diameter of the blanks you see below:

1. Fold the circle in half with your hands, so that you get a semicircle.

Do exactly that! Carefully iron the fold with your hands.

2. Now fold the semicircle in half again.

4. And in the same way two more times.

6. And this is what happens. Carefully trim the ends of each piece with scissors.

7. Start assembling the product. Place all the blanks on a stick. From the largest circle to the smallest.

8. The only thing missing is a star or Santa Claus.

I especially found a video for you so that if you need it, you can, in addition to everything else, roll up a grandfather out of paper. A new article will be released soon, in which you will find many works with this hero, but for now, watch the story.

For those who found the first option quite easy and simple, you can take and fold a Christmas tree in origami style; for instructions and description, see below in this film.

Christmas tree made of beads for beginners (diagram inside)

The next creation of nature is wow, cool and at the same time elegant. And such a souvenir will last for more than a dozen years. This is a spruce made of beads. I thought it was impossible to make such a tree myself. But as it turns out, I was wrong. I am sure you will cope with such work with a bang.

We will need:

green beads - 7 shades
white beads or transparent
plate from under the flowerpot
acrylic paint: white and brown
wire 0.4 mm
PVA glue
ruler
rod 4 mm and length 2 cm
tape
alabaster

1. Place the beads in a cup and mix all the colors. Place beads on the wire in different color sequences and measure 2.5 cm using a ruler. At the same time, leave the edge in the region of 5-7 cm without beads.

2. Make a loop for four circular turns.

3. From the loop, step back 2 cm of wire free and without beads of wire and again count 2.5 cm and make a loop.

4. For the smallest branch, wind 7 loops in this way. Then find the middle and fold it in half and twist the elements together.

5. Thus, you should have this number of branches.

7. Now take the rod and wrap the tape, and then 4 branches with 7 loops to it. The first one is in the center, and the rest are placed below in a circle, twist the stick and wrap it with tape.

6. Next, take 6 branches of 9 loops each. Wrap them in a circle in two tiers of three branches, wind them in a circle. Then step back down about 7 mm and take 5 branches of 11 loops each and wind them in one tier.

7. Retract 7 mm again and wind 6 branches of 11 loops each and again divide them into two tiers. And so on. The final stage is 5 branches of 7 loops.

Rewind the remaining barrel with brown tape. Spread the branches to make the tree lush.

8. Bend the table at 90 degrees and place it in a cup from under the flowerpot. Pour alabaster solution into it and let it dry.

9. Wait until the tree sets; you can also plant any symbol of the New Year. For example, a pig or a rat.

Make a thick solution of PVA glue and alabaster, dip it in a kitchen napkin and glue it to the trunk. To get a natural look.

10. After complete hardening, start painting, but first remove the product from the cup. Paint the trunk brown and the platform white.

11. Decorate with large beads in the form of toys or something else.

Now a few more instructions that I found on the Internet.

But this model is somewhat similar to the first one, maybe someone will like this one more.

And look how lovely it is.

Well, in conclusion, I would like to show one more example of a flat spruce tree, which you can use as a pendant or keychain.

Kanzashi style Christmas tree made of satin ribbon

Well, friends have now reached another elegant option, which looks quite bright and elegant. The green beauty turns out beautiful and lush. But first, you must master the kanzashi technique; for this you need to learn how to make special blanks in the form of triangles. Take a look at the diagram, if it is not clear, you will find a more detailed master class on making such things.

You have to take a green satin ribbon, cut it into pieces measuring 5 cm x 5 cm and repeat all these steps.

Or consider this tip.

Thus you will need:

cone made of thick paper or cardboard
satin tape
star
scissors
wire
candle
heat gun

Stages:

1. Prepare everything you need for work. Place the gun to warm up.

2. Carefully and slowly glue the fabric blanks to the surface of the green cone in a circle and in a spiral.

3. Try to place all the triangles fairly close to each other. After the product is ready, take a star or any bow and glue it to the wire.

4. Place the ornament on the top of the tree. Decorate the souvenir with beads; they will act as a garland.

I came across a more simplified version of the craft in this film, perhaps you will also like it and you and your children will master this technique. Good luck!

Spruce made from cotton pads: a craft for kindergarten children

Now let's get acquainted with a fairly simple craft that you can easily do with your child at home or in kindergarten in class. This option is so easy that it is suitable for any younger or older group.

For creativity, you will need to decorate cotton pads with green gouache. Let them dry completely. Then roll it into a petal and secure it with glue.

Since a Christmas tree is usually made for the New Year, let’s glue the snowdrifts on the blue background sheet first of all. And then arrange and glue the green blanks in the desired sequence in descending order.

You can also get creative and build a snowman or other character. Give free rein to your imagination and the souvenir or postcard will be ready.

It is with these triangular blanks that you can build other options.

The next option, for which you will need the materials you see in this picture. Make a bag out of cardboard, glue the parts with double-sided tape, and make the bottom even.

And then dilute the blue gouache in some water and dip a cotton swab in it. Draw dots along the outline of the disks.

Then glue the round pieces onto the cone, overlapping one on top of the other.

Then decorate the craft to your taste. Winter beauty is ready. What do you think of the idea? The truth is super and fast and cool!

You can go another way: fold each disc in half three times and fasten it with a stapler. Then glue these triangles onto the white cone. And then decorate the Christmas tree with beads and a star.

Or you can also go the other way, make a three-dimensional craft by cutting a cotton pad into four equal parts. See it all for yourself below:

The youngest assistants can be asked to do this kind of work.

Forest beauty made of spruce and pine cones

Of course, not a single New Year's holiday is complete without tangerines and, of course, pine cones. So why not use that too. After all, such natural material is easy to collect in a forest or park, and then sit down and make it.

We will need:

gun
scissors
cardboard
bumps
varnish in a can

Stages:

1. Make a cone from a sheet of A4 paper and glue the ends together. Let me remind you how to do this. Draw a circle, and then cut it in half, coat the walls with glue and let dry.

2. After starting to assemble the product, glue the cones to the workpiece in a spiral. So until the product takes on a finished form.

3. Coat with glitter varnish for durability.

4. Cut out a star from a shiny lid or any other material.

5. Decorate the top with it.

You can go another way and make such a forest charm from husks. Also glue a cone out of paper.

And it is on it that, using a glue gun, glue the particles in a spiral, one after another.

For completeness, decorate with beads or other decorations that are typical for this holiday. For example, tinsel and stars.

Christmas tree made from candies (step by step instructions)

Do you like sweets? Oh, and I just love them. I propose to lay out the symbol of the New Year from them, and take a bottle of champagne as the base.

1. Glue the green fluffy tinsel onto the champagne in a spiral using a glue gun.

2. As soon as the first row of tinsel is glued, glue the candy wrappers (tips) at the same distance.

3. And then add something else, for example a bow.

4. Well, how do you like this wonderful idea? Cool, congratulations to the author! It’s not a shame to go on a visit with such a souvenir).

DIY sisal Christmas tree

Preparations for the New Year are in full swing, so let's do something interesting from such material as coarse fiber. Nowadays it is often used because it is not very expensive, and everyone wants to create with it.

We will need:

sisal fiber green and white
filler
bamboo stick
plastic cup
cardboard
satin tape
scissors
decorative elements: bows

1. Fold a cone from a sheet of cardboard and glue it together. Place the filler in it and insert the stick. The wand will need to be decorated with a satin ribbon. Secure the ends of the tape with glue.

2. Also add filler to the glass and put something heavy on the bottom, such as coins. Use corrugated paper or other material to decorate the glass; it will act as a stand. You can also put a piece of foam rubber on top, for strength, and make a hole in it for the stick.

Insert the prepared cone on a stick into the stand.

3. Roll the sisal into balls by hand.

4. Glue them to the workpiece in different combinations, I mean color. Alternate at your discretion.

5. Now dress up the beauty and sprinkle a little glitter polish. All that remains is to admire or give this masterpiece to someone.

Video on how to make a decorative Christmas tree from threads and PVA glue

And another little beauty that will fit very nicely into any interior or will be an excellent gift, like a miracle made of thread. Watch this story and follow all the steps from the author.

I decided to prescribe the next option for you, please read.

We will need:

PVA glue
threads
foil tape
disposable cup
cardboard or old box
plastic bag
battery operated candle

Stages:

1. Form a cone out of cardboard and glue it with foil tape. Dry. Then put a bag on the geometric figure, fix it even inside, otherwise it will fidget around the workpiece.

2. Place the threads in PVA glue diluted with water (50 to 50). But before that, make a hole in the cup right at the base and thread a thread into it.

3. Fill the cup with glue solution so that the entire thread is covered in glue.

4. Now start winding the thread around the cone in a spiral.

Important! The thread should not be too tight; it should lie easily on the surface of the cone.

3. Thus, in the end you will receive a new souvenir, cut the thread. Leave to dry.

4. After drying, remove the Christmas tree from the workpiece; the PVA will dry and become transparent.

5. Decorate the gift with sequins and then turn on the battery-powered candle and place it in the very base.

6. The Christmas tree will twinkle and act as a mini-lamp or garland.

Craft for the school competition “Tinsel tree for New Year 2019”

Now we move on and perform the symbol of next year using ordinary tinsel. Still, such material is also an indispensable attribute. Do you agree? Plus it looks really beautiful and charming. Take a look for yourself.

We will need:

tinsel of different colors
cardboard - 2 pcs.
glass or pot
foil sleeve
glue gun and PVA glue
scissors
thread with needle
wire
any decorations, lace fabric, bell, balls, etc.

1. Make a cone out of cardboard, take it green.

2. Then cut out a circle from another sheet, 1.5-2 cm larger than the diameter of the geometric figure.

3. Then make these slits on it.

4. On a round piece, trace a sleeve in the middle so that you can cut a suitable hole.

5. Glue the circle to the cone. This is what will happen in the end.

6.Wrap the sleeve with decorative tape and insert it into a cup of plaster.

7. Make a skirt out of lace, assemble it with a needle and thread to make it airy and fluffy.

8. Glue in two tiers to the green blank. Cut the tip of the cone and insert a wire with a bell into it.

9. Now take a glue gun and use it to fix the tinsel in a spiral.

10. Then glue on balloons and other decorations such as beads. Your magical miracle is ready. Create for your health!

Video tutorial on making a New Year's tree from foamiran

If you want something unusual, then I am glad to present you with another little green joy. It will be needle-shaped, and the material will be foamiran. It is quite unpretentious, easy to work with and the most important advantage is that it does not crumble. So, go for it.

Don’t forget to use artificial snow for decoration, which will give the spruce tree unprecedented beauty and brightness.

Vintage corrugated paper Christmas tree

Now there is one more craft that you can also take and perform for an exhibition in a kindergarten or school. The technique will be trimming. Are you familiar with this method? I hope it's very good. And if not, then you will find out now. To work you will need corrugated paper, PVA glue, scissors, and a cardboard cone. And of course, a good mood.

1. So, take a cone to work with. This is what we will be processing now.

2. But before you do this, cut the corrugated squares: 1 cm x 1 cm, 2.5 cm x 2.5 cm, 3 cm x 3 cm, 4 cm x 4 cm, 5 cm x 5 cm, 6 cm x 6 cm.

You can replace corrugated paper with regular paper napkins.

3. Take a small square and wrap it around a stick, then dip it in glue and glue it onto the cone.

4. In this way, fill the entire geometric figure and move in a circle.

5. Take the smallest squares first, then larger and larger ones.

6. You can also make a star out of paper on the top of your head. Or take a ready-made version from the store.

This is the kind of wonderful green souvenir you should end up with. Don't forget to decorate with any beads or rhinestones.

Creative spruce made from plastic bottles

I think that in any home there is a plastic bottle. Take it light green in color. The steps are quite simple, do it with your children to occupy your family leisure time.

Stages:

1. Cut out the middle of the bottles, and then cut it into pieces.

2. You should end up with rectangles like this. From which the branches for the Christmas tree will be made. Their sizes are:

8.5 cm x 6 cm – 6 pcs.
7 cm x 6 cm – 6 pcs.
6.5 cm x 6cm - 5 pcs.
6 cm x 6 cm – 5 pcs.
5.5 cm x 6 cm - 4 pcs.
5 cm x 6 cm – 4 pcs.
4.5 cm x 5 cm - 3 pcs.
4 cm x 5 cm – 3 pcs.
3 cm x 3 cm - 3 pcs.

3. Round each rectangle, bend the tip, and cut after the edge, as shown below.

4. For curl, scorch the fringe with a candle.

5. And then paint the fringes with acrylic paint or nail polish. Pollinate with glitter.

6. Thus, you should make this number of branches, and make a hole on each branch.

7. Then take a stick and stick it into the bottom of the bottle. This will be a stand for a souvenir. Make the hole using a drill.

8. Well, now all that remains is to assemble the Christmas tree, thread the branches onto the stick.

9. Looks chic and attractive.

10. Decorate with a bow and beads. Give such a masterpiece to your friends or keep it for yourself for the New Year's table. Product height 20-25 cm. Cool!

Christmas tree for New Year 2019 from scrap materials (100 ideas)

The time for miracles has come, and so let's get your apartment today. Which each of you can create yourself. For example, you can use this idea and decorate the walls in any room. Such a nice craft will lift everyone's spirits. You can make such a drawing in a school classroom or even a kindergarten room. In principle, anywhere, even in the office.

Such hanging Christmas trees look elegant, and they can be made from anything, as in these pictures. These could be chopsticks or even utensils, take a look:

Or decorate the figure with any lamps or New Year's garlands.

A souvenir with your photos and images on it looks cool.

And also perform illumination. Wow, it’s breathtaking especially in the dark, when it’s already evening or night.

You can add spruce branches or use them to do the work.

You can also create an elegant composition even from ordinary sheets of magazines.

From ordinary leaves for notes you can also make a craft in the form of a Christmas tree, both three-dimensional and for the door.

It has now become fashionable to make compositions on doors or walls. Here's an example from old book pages:

But even in stores they make such wonderful decorations from the books themselves.

Again, depending on where you work, if it’s a clothing and shoe store, then you can disguise the mannequin like this.

In addition, you can also take ordinary wine corks from waste materials and voila, a new masterpiece.

Or use the simplest idea - draw a Christmas tree.

Or make the desired shape using the template.

Well, if you are a very creative person, you can even do the work from machine tires or plywood.

If you work in a hospital or your specialty is related to medicine. Then you can put it this way:

And from ordinary wooden blocks it is also possible to create something beautiful, as shown in this picture.

You can also turn an ordinary stepladder into something very cool, take a look, what does it remind you of?

They even make Christmas trees out of plastic or paper pipes.

And here is another souvenir made from disposable plates.

Or line it with fabric and modern glass marbles.

Or use bows.

For those who are interested in needlework (for example, you can take foamiran or felt) or knitting:

New Year's toys are also used to hang such cool little things that resemble a forest beauty.

This is where the wire was used.

And here they made a cardboard frame.

Crafts are also made from ordinary napkins and newspapers.

Or use scrapbooking paper.

Once I even saw a gorgeous creation made from egg cups.

You can also create a masterpiece out of pillows.

The most original crafts are these, made from bottles.

Here’s another idea from jelly jars or take any containers.

With the kids you can easily make a Christmas tree out of plasticine.

By the way, you can create sweet masterpieces that are also edible. You will need waffle cones and cream.

And here is another beauty, which is made of sweets or cookies.

You can create unusual souvenirs from fruits and berries. I think that children will not resist such beauty and will immediately want to try it on their tongue.

Here's another pasta idea.

And you won’t even believe it, they create products from disposable spoons and forks.

Here is another work made from wool balls and buttons in the shape of a cone.

And here, look, shells were used.

This masterpiece looks quite unusual; it is made of feathers.

Or from a material such as floral mesh or sisal.

Here are a couple more ideas.

That's it, friends, that's all I have. The post turned out to be quite long, but I hope that you found what you were looking for. Create such wonderful decorative Christmas trees yourself or together with your children and be happy. After all, such a souvenir always exists and will be the main attribute of the New Year.

I wish that all your dreams and expectations come true in the near future. Good luck everyone and have a great day! Bye.

OPTION 2

You can make a very original Christmas tree with your own hands from pine cones. But we will not use the whole cones, but will use only their scales so that the tree is not too bulky.

So, first, let's separate its scales from the cone. This can be done with a sharp knife, wire cutters or pruning shears.

The next step is to make a cone from thick paper or cardboard, which will be the base of our Christmas tree. We roll the paper into a cone, glue it on the sides and cut off the excess at the base.

Then we simply take the scales in our hands and glue them in a circle, starting from the base of the cone.

You can glue each new row in a checkerboard pattern, or, like here, on top of each other.

You can glue a spice like cloves to the very top of your head)

9.
After the glue has dried, you can start painting our beauty. To do this, you can use spray paint or regular acrylic paint. If you choose acrylic paint with a metallic effect, your Christmas tree will look much more impressive.

10.
Then we cover the ends of the “twigs” with PVA glue and sprinkle glitter on them.

11.

Using exactly the same principle, you can decorate the cone with chains and beads, decorative cords, ribbons, braid, etc.

OPTION 3

Knitted option:

OPTION 4

From threads:

OPTION 5

Handmade New Year's toys are always something special. They bring warmth and homeliness and are certainly an interesting gift. In addition, they are always original and will undoubtedly attract the attention of all guests.

At the same time, making New Year's toys with your own hands is not at all difficult. Let's start with these Christmas trees :)

To begin, we will cut out blanks for future Christmas trees from thick cardboard (my Christmas trees are 12 cm high and 9 cm wide). I use kraft cardboard for this - it is thick enough to withstand a wide variety of manipulations, and also pleasant to look at.

Option 1. Lace plus paper. Production time 15 minutes.

Using a sewing machine, sew cotton lace to the bottom edge of the Christmas tree. In order not to make a mistake with the length of a piece of lace, I first sew it on and then cut it off.

We retreat from the sewn edge a distance of about one and a half times greater than the width of the lace, and sew on the next frill. To prevent the lace from creeping up or down during the sewing process, I make a mark with a pencil where I need to arrive.

In the same way we sew all the frills onto the Christmas tree.

From scrapbooking paper we cut out pieces one and a half times wider than the width of the lace, one of the long edges of which is made into lace using a hole punch or curly scissors.

Carefully glue the strips under the lace, and sew them on a machine if desired.

We make the top like this.

We cut off the excess paper. As a result, we get a Christmas tree like this. You can apply glitter, snow flakes, glue pearls on it - in general, decorate it to your liking.

The reverse looks like this, but that doesn’t bother us for now :), we’ll deal with it a little later.

Variants of the same Christmas tree: instead of paper lace, you can use any ribbons sewn in the same way as lace; or decorative ribbons with roses

Option 2. Lace plus mini buttons. Production time 15 minutes.

We start in the same way as in the first option - sew on the lace.

We wait 1-2 minutes for the glue to “set” a little, after which we glue mini-buttons onto it in a chaotic manner.

In general, I am a big fan of sewn buttons, but in this case my hand trembled :), and I decided to put the needle and thread aside and use a simpler and faster method.

Other variations on the same theme: instead of mini-buttons - any ordinary buttons or rhinestones or pearls or small paper roses.

OPTION 6

From tinsel

OPTION 7

A simpler version of a Christmas tree made from ribbons is to simply attach a ribbon folded in half to the base. Moreover, you can attach both satin and paper ribbons (paper for scrapbooking).

OPTION 8

OPTION 9

New Year is not only about gifts and lots of goodies. On the eve of the holiday, you can give your child the joy of creativity and self-expression. Admiring an already “decorated” Christmas tree is, of course, great, but it’s much more interesting to make decorations with your own hands and watch how the house gradually turns into a fabulous New Year’s forest! What would a forest be like without a Christmas tree? We invite you to make an amazing New Year tree, which will be an excellent holiday decoration for your home.

To work we need thick green paper, glue, scissors, a round wooden stick and a bead.

1. Cut out 3-4 circles of different diameters from thick green paper. We fold each circle in half four times and draw it along the fold line several times with a hard object. Using scissors, cut a small piece from the top of each folded circle.

2. Take a wooden stick and place the smallest circle on it. The tip of the stick should protrude no more than 5 mm. Carefully place the remaining circles through the bottom of the stick. Lubricate the hole in the top of the largest circle with glue and attach the circle to the stick with glue. This is how we fix our entire structure.

3. Now our Christmas tree can be attached to the base. For example, a wine cork. We put a bead on the top of the Christmas tree, where we left a gap of 5 mm. Our Christmas tree is ready!

OPTION 10

DIY New Year's toy - “coffee tree”

It often happens that the holidays are just around the corner, but you still aren’t in a festive mood. And I really want, like in childhood, to wait for the arrival of the New Year, miracles, gifts and the fulfillment of desires. From my own experience, I can say that mood is born from little things and often comes in the creative process. To feel the coming holidays, you can decorate your apartment for the New Year, start cooking or making something special. For example, a fragrant Christmas tree made of fabric and coffee. Why not? Moreover, you need few materials for this wonderful New Year tree.

Materials for creating a DIY coffee tree:
a sheet of cardboard a small jar, for example, baby food coffee beans a small piece of fabric or burlap varnish (you can do without a coating) Almost everyone also has the tools necessary for the work.

Tools for making a Christmas tree from coffee beans and fabric:
tweezers compasses glue (it is very convenient to use a hot glue gun) brush scissors needle and thread We do not indicate the sizes and quantities, since it all depends on what materials you use, as well as on the expected size of the Christmas tree. The process of creating this tree is simple and exciting. You can turn on some favorite New Year's movie in the background, and you will immediately feel that the New Year is already very close, and miracles are knocking on your door.

Making a coffee tree with your own hands
We make a cone from cardboard or thick paper. If you need a larger Christmas tree, you can use leftover wallpaper for the base. We glue the cone well around the edges. We put it on the table, check that it should be stable and tight.

We select a suitable size jar with a screw-on lid for the base.

Glue coffee beans onto the jar. The grains need to be glued on the same side, so the jar will look neater. It is convenient to take the grains with tweezers to protect your fingers from glue and burns (if you use a hot glue gun).

When the coffee beans are securely attached to the can, we proceed to the second layer, which we use to close any possible cracks and gaps between the beans.

The result should be a jar that looks like it consists of coffee beans. Only the neck is not covered so that the jar can be closed with a lid. The grains on the jar can be varnished. Then the leg of the tree will be smoother and glossier, but this will reduce the coffee aroma.

Let's get to the Christmas tree itself. If the size of the Christmas tree is large, and the frame (cardboard cone) does not seem rigid and stable enough, then it can be strengthened by simply filling it with something from the inside. This could be paper, napkins, fabric, etc. We cut the fabric or burlap for the external decoration of the Christmas tree to the size of the cone.

Glue the fabric to the cone, stretching and smoothing it.

Cover the bottom with a circle of cardboard.

We also cover the circle with cloth.

We will decorate the Christmas tree with patches. To do this, cut out identical small squares from fabric.

We remove several threads along the edges of the squares to form a neat fringe.

We glue the patches to the fabric on the cone. Glue coffee beans to the corners of each patch. This way we decorate the entire cone.

Now that the cone and jar are ready, let's move on to the lid of the jar. It must be decorated and glued to the bottom of the cone. If desired, it can be decorated with coffee beans (gluing the edges with them) or fabric (we will dwell on this method in more detail). Cut a thin strip from the fabric. Using a needle and thread, we form equal folds on a strip of fabric, and then glue the fabric to the lid.

All that's left is to glue the lid to the bottom of the cone.

New Year's decoration is ready! It can also serve as a nice gift, either on its own or as a jar of coffee. New Year's decoration Festive mood and miracles to you!

AND A FEW CREATIVE IDEAS:

THANK YOU FOR YOUR ATTENTION!!!