Braiding outwards step by step. Stylish French braid with reverse twists: photos, video tutorials and weaving pattern. How to weave a braid: at the back of the head, from the tail, without tiebacks

Recently, the “French braid” has become especially popular among the fair sex due to the variety of options and beauty of shapes. And although this type of weaving did not appear in France at all (the earliest mentions were found in rock paintings in Algeria and are more than six thousand years old), there are several versions of why the braid is called “French”. One of them says that for the first time this method of weaving was widely advertised and introduced to the masses by a certain French stylist, placing it in contrast to the “English braid”. According to another version, in the eighteenth century, the hair of majestic persons was braided in a similar way by the court hairdresser at the Palace of Versailles. Which one is true is not important. The main thing is that the “French braid” suits everyone and looks great on any woman’s head.

French braiding (classic version)

The essence of weaving any of the “French braid” options is to add additional strands to the main strands of the braid from the free mass of hair.

The classic version is created as follows:

• Hair should be thoroughly combed. Those with thin hair are advised to backcomb the front of the head first.
• It is necessary to separate a small strand of hair above the forehead and tie it with an invisible silicone elastic band.
• On each side of the central strand you need to separate one more strand of the same size.
• Make a binding by throwing the side strands over the central one, as for a simple braid.
• On the next binding, you need to add hair from the free mass of hair to each side strand. It is necessary to grab the strands on the sides and parallel to the height of the braid.
• Braid in a similar manner until you run out of free hair (approximately to the base of your neck).

• Next, you need to braid the braid to the end and secure it with an elastic band.
• The silicone rubber band on the top strand must be disguised under the hair or carefully cut off with thin nail scissors.
• You can leave the weave tight, or you can add pomp. To do this, you need to slightly lower the lower elastic band and stretch the parts of the braid along the entire length.
• To keep your hair looking neat for a long time, you can spray it with hairspray.

To make any braid bright, original and festive, just add decorations, for example, a colored shiny ribbon.

Some tips for choosing tape:

• The tape should be soft (without a metal frame inside).
• The optimal width is 1.5 centimeters.
• Before use, it is advisable to wash the tape so that the color does not fade or stain the hair.

How to weave (two of the simplest options out of many possible):

• A “French braid” with a ribbon is woven in exactly the same way as the classic or voluminous version, but instead of a central strand, a ribbon is used. It needs to be secured with a bobby pin chosen to match the hair under one of the top strands.
• After dividing the hair into strands, from which a “French braid” will later be formed, it is necessary to tie a ribbon to the middle strand. Both ends of the ribbon must be equal and must be much longer than the hair (otherwise the ribbon may not be enough). Halves of the ribbon are added to the side strands. After this, a “French braid” is braided, but you just need to try to shift and add strands so that the tape always remains on top. It is best to rearrange the hair first and then place the tape on top of it.

French fishtail braid

Among other variations of the “French braid”, the “fishtail”, also known as the “spikelet”, has earned special love from the fairer sex for its originality. It can be straight, oblique, tight, or fluffy, with a combination of other elements, for example, regular braids, buns, plaits or ponytails.

How to do a French fishtail braid:

• Clean and thoroughly combed hair should be divided into two equal parts with a straight parting in the middle.
• The French version of the Fishtail starts from the very forehead, while the regular one starts at the base of the neck.
• To form a weave, it is necessary to separate small (conditionally equal) strands from the edge of each part of the hair and alternately throw them to the other side.
• In this way, the fishtail is braided along the entire length of the hair, and at the end it is secured with an elastic band or a hairpin.
• To add French charm to your hairstyle, you can decorate it with flowers.

The classic version of the “French braid” looks somewhat flat and is not always suitable for women with thin hair. However, stylists and hairdressers have found an excellent solution to this problem - this is the “reverse French braid”. It is also called “inverted” and “volumetric”.

When creating a “braid in reverse”, they are guided by the same principles as in the classic version, but only the side strands are placed not on top of the central one, but under it.

The inverted French braid is often used with a variety of buns. The bun can be formed from the braid itself or collected separately, and can also be located above and below the braid.

Creation:

• The first step is to weave a “reverse French braid” (one or two as desired). It can start in any part of the head (at the forehead, at the neck, behind the ear, and so on).
• The braid is woven to the desired location and secured (with a silicone rubber band or a bobby pin to match the hair color).
• Then a bun is formed (braids, strands are twisted, or a donut is used).

The “French braid” looks very interesting, braided not straight, but to the side or in a zigzag. That is, weaving should begin not at the forehead, but behind any ear. Then weave not downwards, but diagonally. If a zigzag is planned, then when you reach the edge you need to turn the weaving in the opposite direction. Otherwise, the execution technique is no different from the classic version or the “reverse braid”.

How to braid yourself with two French braids

Such a wonderful weave as a “French braid” will look great in a double copy. This option will especially appeal to young girls for its originality, beauty and practicality. After all, you can do it for school, for a walk, for a party, or for a date.

• You will need two mirrors, which must be installed opposite each other so that if you look into one of them, the back of your head can be seen in the other.
• Divide the hair vertically into two equal parts.
• Temporarily remove one part to the side and pin it to keep it out of the way.
• From the second part, form a “voluminous French braid”, moving from top to bottom and tie with an elastic band.
• Release the second part and do the same with it.
• Fluff and decorate your braids.

Refined and sophisticated young ladies will love the “French braid with bows.” This hairstyle will look great with an evening dress or wedding dress.

Step-by-step instruction:

• It is necessary to separate a small amount of hair from the forehead and tie it so that it does not get in the way.
• The remaining hair needs to be braided into a classic “French braid” on one side.
• Secure the finished braid with an elastic band.

• Then the hair that is left should be combed and moistened with water to prevent frizz.
• You need to thread a hairpin into the first ring of the finished braid.
• Separate a thin strand from the mass of loose hair, moisten it, form two rings, one of which is threaded into a hairpin and pulled through the braid.
• Hide the remaining tip under the hair.

• Separate another thin strand and do the same steps, but only in the next division of the braid.
• Same with all the hair left behind.
• Straighten your hair and spray with hairspray.

And lovers of loose hair may find the “French braid” useful. For example, to create a romantic hairstyle, which hairdressers call a “French waterfall.” In it, the hair is woven into a braid and directed downward so that it really resembles streams of water.

Weaving order:

• The braiding starts from the temple like a regular braid.
• Three strands are separated. The bottom one is placed on the center one, then the top one is placed on the center one.
• Lower again, then upper.
• Now a small strand of free hair is separated above the braid and placed there, with their ends (the upper and additional strands) left hanging.
• Next, the lower strand is thrown over the hanging one, which takes its place.
• The top strand is thrown over again.
• Now you need to separate a small strand under the braid and throw it on the top one (just like before the bottom one) and so on.
• According to this pattern, all the hair around the head is braided (from temple to temple).
• The ends of the “waterfall” can be left straight or curled.

It’s not without reason that people have been saying for centuries “the braid is a girl’s beauty,” because it can make any lady a little more beautiful, graceful, pretty, romantic and feminine.

French braid: video

How to weave a voluminous braid (French braid in reverse): photo step by step + video

Braids are different, they are all beautiful in their own way. Braids make a girl feminine, gentle, and, in the latest fashion trends, also stylish. Of course, long-haired girls should not avoid braided hairstyles, because a correctly, beautifully and stylishly braided braid looks very modern. Braids are suitable for everyone: little girls and adult girls. But to create such hairstyles, you need to have long or medium hair, and also know the weaving pattern in order to create beautiful hairstyles yourself.

Today the site will show you how to weave a voluminous braid, or rather a French braid in reverse. Step-by-step photos of weaving will help you understand the technique and order of crossing strands. It is very easy to braid and after a couple of workouts you will definitely have a beautiful, lush and voluminous braid.

The most important and only difference between an inverted braid and a classic French braid is that the strands are intertwined not through the top, but through the bottom. That's the whole secret. The weave seems to be turned inside out and a voluminous braid with a clear pattern of intertwined strands is visible from the outside. In a classic French braid, the braid is hidden and the hairstyle looks sleeker. Also, there is another little secret how you can get an openwork, wide braid - after braiding or during it, the strands that are already woven into the braid are pulled out with gentle movements. The braid becomes wide, lush, creating the effect of super-thick hair.

A voluminous braid is good for thin and thin hair, not only long, but also medium length. Before braiding, thin hair is wrapped in curlers, waves are created, and a small, light backcombing is done near the roots. Wavy hair is more pliable, holds its shape well and, together with backcombing, creates volume. For medium-length hair, when weaving a voluminous inverted braid, hairpins and bobby pins are used to pin up strands that are not long enough and hairspray - it will fix the hairstyle and will not allow the braid to unravel.

How to weave a voluminous braid: step-by-step photos

The braid can be braided in the center of the head or started from the side. The braid looks beautiful when braided diagonally on its side. In general, having mastered this simple weaving, you can create many beautiful hairstyles, which will be based on a voluminous braid. Here everything depends on imagination, and the technique and skill of weaving can always be practiced.

First step, take a wide section of hair where you want to braid it: above your forehead or above your ear for a side braid. Divide the wide strand into three strands of equal thickness.

Do you know how to weave a simple three-strand braid? Start as if you were going to braid it - a regular braid. There is only one difference - the strands are placed under the bottom. The outermost strand (No. 1) needs to be placed under the middle strand (No. 2).

Now you need to do the same with the other strand. Place the leftmost strand (No. 3) under the middle one through the bottom.

Now you need to weave strands from the total mass of hair on the sides into the braid. To do this, a new thin strand is added from the total mass of hair on the right and joined to the existing strand on the far right.

And this double strand needs to be placed through the bottom under the middle strand.

We repeat the same on the other side. We take a strand from the total mass of hair on the left, connect it to our leftmost strand and cross it with the middle one through the bottom.

We continue, repeating similar steps. We direct the weaving along the planned line.

After all the hair has been woven into the braid, you can tie a ponytail or continue weaving a regular braid, repeating the weaving motif - the outermost strand is placed under the middle one through the bottom. The secret of a wide, openwork braid is to gently pull the edges of the already woven strands with two fingers, alternately straightening and pulling them out a little. You don't need to pull the entire protruding edge, just pull 1/3 of it. That is, a strong weave should remain in the center of the braid.

Weaving video tutorial

How to weave a voluminous braid, a French braid in reverse: photos of hairstyles

Beautiful hairstyles are created based on this weaving. The braid can be braided by starting the braiding upside down from the back of the head and finishing the braiding with a lush bun. It is very convenient and stylish to weave overgrown bangs or facial hair into a braid, leaving the rest of the hair loose.

Many ladies prefer to braid inverted voluminous braids instead of regular ones, as they look much more advantageous. The ancestor for the very first eversion braid is. One smart man, unfortunately, his name has been erased by the sands of time, came up with the idea of ​​putting the strands not at the top, but underneath, that is, under each other, when braiding a braid. It would seem such a trifle, but what a difference it makes. An inverted braid looks fuller, more voluminous, more interesting, and more beautiful. Judging by the fact that this braid is also called “Danish”, this all happened in distant Denmark. Today, this method is used to weave not only spikelets, but also almost all known variants of braids - and so on. Below are some of the most popular hairstyles that use the inverted braiding technology.

How to weave classic inverted braids: step-by-step instructions

• Separate a small strand of hair from the total mass and begin weaving a regular French spikelet, only place the strands under the adjacent ones, and not on them.
• On the second segment of the braid, add new strands to the main strands, captured from the free mass, and also place them underneath.
• Weave this method to the base of the neck. By this point, the loose hair should be fully engaged.
• Braid the remaining end like a standard three-strand braid.
• Stretch the sections of the braid along the entire length to give it additional pomp.

Classic inverted braid, braided to itself

This video is a detailed instruction on the classic weaving of a chic braid inside out.

Stretching the braid is a very important final step. The main thing here is not to overdo it and not ruin everything. How to correctly pull out the slices of an inverted braid using the two most common and simplest methods is clearly shown in the video below.

• Divide your hair into two equal parts using a vertical parting.
• Separately braid each half with an inverted French braid.
• Straighten each braid by pulling the sections.

The heroine of the next video very clearly shows how you can braid two parallel braids inside out on your own head.

Two inverted braids will look unusual, bright and original if multi-colored strands of kanekalon, a synthetic fiber very similar to real hair, are woven into them. Moreover, creating such a hairstyle on your own head with your own hands will not be difficult. You just need to initially attach the fiber under the top strand of hair on each side, and then braid two classic braids inside out.

If you start braiding from the temple and, grabbing strands, move towards the ear on the opposite side of the head, the result will be an original side braid. Moreover, a diagonal braid is woven inside out quite easily, so you can easily braid it both on your own head and on someone else’s. And if you add decorative elements, such as flowers, hairpins with pearls or stones, a beautiful hairpin, and so on, then this hairstyle may well act as an evening option.

Side inverted French braid

An inverted braid braided on the side looks beautiful and original. It is woven similarly to the diagonal one, only you need to move first along the forehead, and then behind the near ear down to the base of the neck.

• Gather the top half of your hair into a ponytail at the top of your head.
• Insert your fingers into the middle of the hair above the elastic and pull the end of the ponytail in, turning it around.
• Grab some more hair from the sides, tie it together with the ponytail and twist again.
• Divide the resulting ponytail into two halves and braid it with an inverted French braid.
• It is braided in the same way as a regular one (you need to separate the outer strand from each half in turn and throw it to the other side, and add an additional strand of free hair to each subsequent weave), but only the strands are shifted from the inside, and additional strands are also placed underneath .
• Braid to the end, tie with an elastic band and straighten the braid, pulling on its sections.

Inverted braids with ribbons

Topsy-turvy braids already look interesting in themselves, and if you add a bright ribbon to their braiding, the hairstyle will look stylish, fashionable and elegant.

How to secure a ribbon in a braid (5 ways)

Before you start weaving any braid with a ribbon, you need to carefully and beautifully secure this ribbon in your hair. This can be done in many different ways, five of which are described in the video presented.

This braid is woven according to the diagram below.

1. You need to start at the temple.
2. Separate a small strand and secure the ribbon underneath it.
3. Divide the strand into three parts, the ribbon acts as the fourth strand, but is in third position if you count from left to right.
4. The first strand needs to be placed under the second, and the ribbon under it.
5. Place the fourth strand on the adjacent one, and the ribbon on top of it.
6. Then, to the outer strands, add additional hair from those that are not yet used, and the additional strands should always be placed underneath.
7. Braid using this method, moving towards the opposite ear.
8. Braid to the end, tie the end of the remaining ribbon around the braid and form a bow or secure everything together with an elastic band.
9. The end of the braid can be combed to make it look fuller.

• Divide your hair in half with an even parting from the middle of the forehead to the base of the neck.
• Place the ribbon on your head as if it were a headband and so that one of the ends of the ribbon falls onto each half of the hair.
• On one side, temporarily secure the tape with a clamp.
• And on the second half, braid an inverted braid according to the same pattern as the diagonal braid described above.
• Wrap the remaining end of the ribbon around the braid, tighten the knot and form a bow.
• Do the same for the second half.
• Straighten both braids.

Knowing the technology of weaving inverted braids and combining them with other elements, you can create an endless variety of wonderful voluminous hairstyles.

Inverted braid: hairstyle video

Inverted fishtail with ribbon

Inverted braid basket with flower

Side braiding of an inverted braid in combination with a bun

Start your first braid. Select the side of the head to start working on. Take a small section of hair from the front and separate it from the rest of the hair. Divide a section of hair into three sections. Form the base of the braid with a classic first-link braid - cross the right strand over the center strand, and then cross the left strand over the new center strand.

Create a French braid. Grab some loose hair into the right strand and then bring it (already enlarged) over the center strand of the braid. Pull some loose hair into the left strand and then also cross it over the new center strand. Continue braiding the braid in the same way, gradually bending it around your head.

• Stop when you reach the middle. Temporarily secure the braid with a bobby pin or hair tie.