Natural women's sheepskin coat from what. Care tips. How to distinguish a natural sheepskin coat from an artificial one

A sheepskin coat is a comfortable, practical and warm thing. It will warm you in cold weather and decorate its owner. Nowadays the choice of sheepskin coats is so rich that many people buy them without hesitation. At the same time, the quality and competence of the manufacturer is not checked. But with such a variety, you can make a mistake and buy a low-quality fake. After all, few sellers are conscientious and notify about this. Therefore, you need to learn how to choose expensive things correctly. Even before the moment of purchase, you should find out the rules and features of how artificial sheepskin differs from natural one.

General rules on how to distinguish natural sheepskin coats

Artificial sheepskins are so good that it is very difficult to distinguish them from natural ones. Modern manufacturers have learned to perfectly disguise counterfeits as high-quality products. Moreover, if the buyer is not a professional in this field, she may make a mistake. There are several operating rules that are easy to remember and apply in practice:

Checking the cuts. Their color should be uniform and neat, without the presence of any light or dark spots. No lint sticking out from the cut;
Evaluation of the texture of the material. Natural sheepskin is smooth and soft. After running your hand over the surface, a mark should remain on the material. It will disappear over time;
Smell. High-quality sheepskin smells exactly like an animal, like a sheep. At the same time, the aroma intensifies if you rub the fabric with your hand. An artificial sheepskin coat emits a synthetic smell, closer to plastic. It has a sharp feel and is unlike sheep. Many people identify an artificial thing by its aroma;
Deformation of the product due to mechanical actions. If you take the hem or sleeve in your hand and squeeze it tightly, then marks and creases will remain on the fake. It takes a long time for it to return to its original form. Fearing this, sellers sometimes prohibit touching the product with your hands. This should immediately alert you. In this case, you need to ask the consultant to carry out the execution;
Moisture absorption. Natural sheepskin has water-repellent properties. If you drop water on its surface, the drops will not stay and roll off. On a synthetic analogue, water will not only linger, but will also be immediately absorbed. After drying, an unsightly stain will remain;
Product weight. Natural sheepskin weighs a lot. If you take it in your hands, you will immediately feel it. And when putting it on, you will feel the weight of the product on your shoulders. There are, of course, varieties of sheepskin coats that are thin and lightweight. For example, products with Tuscan fur. But the main species weigh at least two kilos. Counterfeits are usually very light;
Inspection of seams. You definitely need to inspect the thing from the inside. Threads should not stick out from the seams. In a high-quality product, all the lines are even, without errors. The seams are neat and processed according to the rules.

Important! Another important step when purchasing is to ask for a certificate. The document confirms the quality of the product. And it contains all the data about the sheepskin coat: manufacturer, brand, composition, date of sewing, etc.

Several ways to determine: artificial sheepskin coat or natural

Many buyers are embarrassed to examine an item in a store. Or they are in a hurry to buy, not wanting to waste time due to being busy. And in the process of wearing, doubts arise. Or, one of my friends said that the new thing is a fake. How to find out this in accessible ways? There are several methods to check:

There are always spare pieces of material on the lining. For experimentation, it is better to cut off the fabric from there. Place it on a plate, set it on fire and observe. Natural fabric burns slowly and emits the smell of lamb. Synthetics ignite instantly and turn into a hard charred ball;
The next way of recognition is to look under the villi (between them). You need to push the pile apart from the inside of the product and take a closer look at the growth area. If the item is artificial, the backing (textured fabric) will be visible under the hairs. Real skin will “show” that the pile grows from it;
Wet the fabric. You can moisten an additional piece of cloth with water and squeeze it out with force. The sheepskin will leave the smell of the animal on your palm. The fake will not leave a smell at all. Or it will smell like plastic;
Many people, after purchasing sheepskin coats with fur from Tuscany, after a while the fur begins to come away from the fabric. This means it is glued. Some ladies, not wanting to admit the terrible fact of a fake, calm themselves down, thinking that this is the result of laser processing. In fact - a real fake. No conscientious manufacturer will process an item with a laser to such an extent that the pile begins to fall off. After processing, sheepskin coats look shiny and do not come apart.

Tips to leave no doubt that the sheepskin coat is natural

A quality sheepskin item will not cost less than 25 thousand rubles. If the price is lower, there is no longer any need to doubt that this is an artificial product. Don't forget to study the label. The manufacturer leaves important information on it.

If after examining the sheepskin coat you still have doubts, it is recommended to examine the inner fur. It should be even in color and uniform in texture. You have to pull the fibers. The native skin holds them tightly. And from synthetics, the lint comes out in a clump.

If upon inspection of the product you find minor defects, such as scratches or streaks, do not be disappointed. On the contrary, it means that the item is natural. Since sheep are restless animals, they often bite and leave scars on each other's fur. These marks cannot be removed even with special treatment. They can only be disguised by painting.

Modern technologies for the production of faux fur make it possible to create materials that only specialists can distinguish from natural ones. When choosing a sheepskin coat, it is important to know the features of both furs so as not to make a mistake.

You will need it

Product, matches, water.

When choosing a product, run your hand over the surface of the skin. Fingerprints remain on natural materials – “graphic writing”. This is the most important indicator of the authenticity of the material. Conduct a visual inspection. There cannot be creases on the surface of a natural sheepskin coat, even if it has been stored folded. Crumple the surface of the product. The folds on a sheepskin coat made of natural material will quickly straighten out. After some time, the fibers will again take their places, and the mark will disappear, and the surface will become uniform.

Take the fur by the pile and pull out 3-4 fibers. Set them on fire. When natural fur burns, the corresponding smell of burnt wool will spread.

Take a close look at the seams. On a product made of natural material, they are made hidden, covered with leather on top. All seams on such a sheepskin coat are made as carefully as possible, the parts are connected tightly.

Take a closer look at the skin sections, if any. Open cuts often reveal the origin of an item. They come on a turn-down collar or a wide cuff of a sheepskin coat, everything depends on the style. The thickness of natural skin is sometimes similar throughout, and it is not always possible to cut natural material exactly. This can serve as an indicator of the origin of the sheepskin coat.

Look closely at the fur, touch it. It should be uniform, moderately colored and the fibers should be directed in one direction, in most cases from top to bottom. The natural material is soft and pleasant to the touch. In order to pull out several hairs, it is necessary to apply force. From an artificial sheepskin coat, the hairs can be stretched in whole bunches.

Check the water resistance of the product. Drop water onto the surface of the sheepskin coat. If it is natural, then tanned leather will repel water and drops will roll off it. The artificial product will absorb water.

Check if reference information is available. Labels with care tips and information on the composition of the material should be carefully sewn into the seams.

The cost of a natural product cannot fall below 18-20 thousand rubles. After all, fur dressing is an expensive process.

Warm days will quickly fly by and frost will creep up unnoticed. Therefore, you need to think in time about how to choose a sheepskin coat. The modern market offers a huge selection of various insulated jackets, down jackets, sheepskin coats and fur coats. Of course, each person chooses clothes according to their preferences. However, experts advise paying special attention to sheepskin coats in 2018.

We should not forget that a sheepskin coat has always not only emphasized the financial well-being of its owner, but also perfectly demonstrated its warming qualities. It can also be noted that against the backdrop of an abundance of fur coats, a sheepskin coat can stand out with its elegance. Therefore, we will devote our article to the topic of how to choose a natural sheepskin coat and correctly evaluate its strength characteristics.

How to choose a sheepskin coat made of genuine leather?

Today, the modern assortment of sheepskin coats offers a wide variety not only in terms of appearance, but also in terms of quality. In the old Soviet times, no one doubted the quality of this type of clothing, since it was manufactured under strict control and subject to compliance with government standards. Today the situation has changed and representatives of the fairer sex need to have certain knowledge in order to choose a high-quality sheepskin coat and subsequently not be disappointed in the purchase.

In order not to be disappointed in the quality of this type of clothing, it is worth studying the advice of experts. Here's what they say:

Fur velor (the outer side of the product) should be soft to the touch and have a uniform pile.
The outer surface of the product must have a graphic writing property, that is, it must retain a clear trace when touched by a finger.
Before purchasing, you should carefully inspect the front surface of the sheepskin coat for scratches, grease and salt stains, paint stains, and glue stains. If they are found, the product is not worth purchasing.
If the coating of the product has a water-repellent treatment, then the surface should not be rough or sticky to the touch. You can check how the coating of a sheepskin coat behaves from contact with water by moistening any area of the coating with water.
The edges of the product and all its corners must be flawlessly processed, the seams must be stitched with two lines.
Low quality sheepskin coats will be indicated by gaps in the seams, crooked stitches, folds, and lint catches.
A good coating after compression is easily and instantly leveled. Therefore, it is worth crushing the product before purchasing.
The sheepskin coat should not have an unpleasant odor. This will be evidence of low-quality raw materials, poor dye or unnatural leather.
If lightly pinching the lint leaves a lot of lint in your hands, you should refuse the purchase, since the lady will be disappointed in the quality of the fur in the near future.
When buying a sheepskin coat, you should definitely study the label. A reputable clothing factory will indicate on the label the composition of the product, origin, operating instructions and cleaning methods. Also, at the buyer’s request for quality products, the seller will always provide a quality certificate.
How to choose a warm sheepskin coat for the winter?
Most often, young fashionistas, when buying a sheepskin coat, look only at its cut, completely ignoring the thermal insulation properties of this outerwear option. In our country today, foreign models are very popular due to their extraordinary design, color, light weight and comfort to wear.
Sheepskin coats made by Russian craftsmen are denser and heavier, and in appearance they are often inferior to foreign versions. This is due to the use of old patterns and imperfect technologies. Domestic technologies, unlike foreign ones, ignore European rules for processing raw materials to increase the pliability of leather.

Therefore, if you need a warm sheepskin coat, you need to look at the length and thickness of its fur, and the uniformity of the haircut. The best quality is demonstrated by those made from sheep skin. It is this fur that can effectively heat at fairly low temperatures and provide high wear resistance. The only drawback of sheepskin coats is the extra weight.

Popular today are sheepskin coats made from Tuscan lamb skins. In terms of price, they will be more expensive than domestic products, but their high cost is justified by their beautiful design, thick fur and excellent heat-saving properties. The negative side of Tuscany is the need to constantly comb the fur (this must be done so that it does not mat).
If the buyer has not yet had experience wearing good quality sheepskin coats, then one can easily get lost in the large assortment. Therefore, before buying a sheepskin coat, you should know by heart the criteria that you need to look at so as not to mistakenly end up with a fake. So:
1. Folds and creases should not be visible on the coating. In such cases, sellers explain that the folds will straighten out during wear. This is wrong. Genuine leather does not wrinkle into creases, even if it has been folded for a long time.
2. The natural item has a water-repellent effect. Water falling on a natural sheepskin coat flows off its surface without being absorbed. If the seller of a retail outlet does not allow you to test the leather for water-repellent properties, then he has something to hide.
3. Uniform color. In daylight, the front side of outerwear should have a uniform shade. If the quality is poor, light and dark streaks may be visible. The edges of the cut leather should be painted close to the fur.
4. High quality dye. To make sure that the sheepskin coat will not fade, you should touch the coating with a white piece of cloth (handkerchief) soaked in water. If the fabric is dyed the color of a sheepskin coat, then you should immediately discard it.
5. Fur quality. A high-quality fur covering should be long and come in one color. After a thorough inspection, you can try on the sheepskin coat. Here it should be remembered that the product should not hinder movement and fit tightly to the figure.
6. Loose fit- an important point, since it will allow you to wear a warm sweater under your outerwear in winter. A comfortable product will not make any cracking or rustling sounds when bending over or raising your arms.

Fur experts believe that Canadian and Finnish ones are considered the best in quality, while Romanian, Bulgarian and Yugoslav ones are cheaper.

The price of French, German and American sheepskin coats is much higher, but they cope worse with Russian frosts. But most of the sheepskin coats available for sale are Turkish, factory-made or home-made.
Handmade ones are of very low quality, but factory ones are quite good; the manufacturer is usually indicated on the label, and they are often passed off as Italian.

Fur velor (as experts call the material from which sheepskin coats are made) made from Russian and Turkish sheep skins is considered the warmest and most durable. They have thick thick skin and very thick fur. All this does not lend itself to intricate cutting. of this velor are the heaviest, but also durable. They are not cold even in the Far North. Australian and British skins are also warm and heavy.

Spanish fur velor (they sew from it Italian sheepskin coats) is light and soft in comparison. The skin is thin, porous, the fur is not very thick, soft, airy. It is not suitable for frost. And his life is short-lived. But it is good for sewing beautiful, elegant, intricately cut things. The latest squeak is Italian lightweight jackets. To make them, the most delicate material is taken - lamb skins. “Weightlessness” is achieved by cutting the fur and thinning the skin by cutting off the transverse layers. But at the same time, along with the weight, the heat-protective properties and wearability decrease.

But this is nothing more than a theory. So How can you be sure of the quality of a sheepskin coat by external signs?

1. A good front finish will be indicated by the so-called “graphic writing” effect - if you run your finger or palm over the sheepskin coat, a clearly visible mark remains. The outer leather is called fur velor, and it should be soft, with a pile evenly distributed over the entire area.

2. Inspect the sheepskin coat carefully - there should be no pockmarks, scratches, salt stains, grease deposits, traces of paint or glue on the front side. Before selling, the item, unless it is handicraft, will be cleaned of dust, thread ends and cut hair. Along the bottom of the product, sleeves and along the edges of the sides, the hair should be trimmed and not visible from the front side of the parts.

3. If a sheepskin coat is coated with a water-repellent film, such a coating is expected to be uniform, uniform, elastic, non-sticky, and resistant to dry and wet friction.

4. Regarding finishing, the corners of the welt pockets should be secured. And take a closer look at the seams, which in a good sheepskin coat are even, without gaps, folds, wrinkles or catching hair in the seam.

5. In a conscientiously sewn sheepskin coat, the seams are made double. Pull the product with your hands by the hem; the sleeves of a good quality item should not stretch. Remember the sheepskin coat in your hands - with good dressing, the surface will quickly smooth out. Sniff - there should not be a strong smell of chemicals.

6. When purchasing, pay attention not only to the sheepskin coat itself, but also to the markings. It must contain comprehensive information on origin, operation, care and cleaning. Because some, alas, cannot be dry cleaned at all.

7. The perfect sheepskin coat When sold, it is supplied with a personalized certificate confirming that the product will not lose its appearance after cleaning. And even in this case, a sheepskin coat can be dry-cleaned if it has been worn for no more than 5 years. And then they can accept it, but ‘without complaints’. The same applies to new, but of dubious quality things - dry cleaning can seriously damage them. And you just need to be prepared for this risk. Or don't buy such things.

It is worth especially noting that it is best to choose a sheepskin coat in a store, and not in the market.
When choosing a sheepskin coat, focus on the manufacturer. Finnish and Canadian products are considered the best, but not everyone can afford them at a cost. Yugoslavian, Romanian and Bulgarian ones have a much lower cost, and the quality is not much worse. German, American and French sheepskin coats, although they cost a lot, are completely unsuitable for the Russian winter - they cannot cope with the cold.
But most of the products presented in Russia are made in Türkiye. If a Turkish sheepskin coat is sewn in a factory, then its quality may not be bad, but a product made in artisanal conditions will not please you in any way. I’m generally silent about Chinese products. That's why it's so important to be able to choose a sheepskin coat.

The most profitable time to buy a sheepskin coat is at the end of winter. This is already “out of season” and you can buy a good thing for half the price than in the fall or early winter.
The heavier the sheepskin coat and the simpler its cut, the warmer and more durable it is. This is explained simply: thick leather protects well from frost and does not wear out so quickly. In order to sew a sheepskin coat intricate cut, the leather is usually artificially thinned, which undoubtedly affects its durability and heat-insulating properties.

Choosing a sheepskin coat, run your finger over its surface. A quality item should leave a mark. The pile on the entire product should be uniform and soft.

The smoother and silkier the surface, the higher the quality.

Shake the product. If you hear a characteristic crunch, then do not buy such a sheepskin coat - once wet, it will become a “stake”.

If the sheepskin coat is dyed, run a white handkerchief over the surface of the leather. Is there any paint left on the scarf? This product will fade after the first rain.

By the way, let’s touch on the issue of coloring in more detail. Turn the dyed sheepskin coat inside out and inspect the underside of the leather. If the product is painted correctly, the paint will completely saturate the leather. If the paint is not visible from the inside, it means it is not durable.

Carefully inspect the sheepskin coat. The surface of the leather should be free of scratches, stains, glue residues and traces of paint. Remember the skin in your hands - it should quickly return to its original appearance.

Check the seams carefully. The lines should be uniform, without gaps or puffs. A good product has double seams.

Examine the sheepskin coat from the inside out. If it is cut and sewn correctly, then the fur on all parts will be combed in one direction (from bottom to top). If this is not the case in your sheepskin coat, then be prepared for the fact that when wet, the parts will differ in color, since water will drain from them differently. In addition, such a sheepskin coat will be uncomfortable to wear.

The fur on the inside should also be uniform along the entire length and without bald spots. The hairs, if you pull them, should not remain in your hands.

Place the sheepskin coat on a horizontal surface. No lumps should form - this indicates that the sheepskin coat is stretched.

All information about the manufacturer, the product and its care must be provided in full. Remember that some sheepskin coats cannot be dry cleaned, and information about this must be indicated.

note that in accordance with the “Law on Consumer Rights”, the period for exchange of fur products is six months. And not six months from the date of purchase, but six months from the beginning of the season. Season – from November 1 to March 1. That is, if you bought an item in the middle of the season, then the period is counted until the end of this season (for example, from February 1 to March 1) and then the remaining days from the beginning of the season (from November 1 to March 1). During this period, the store is obliged to either replace the low-quality product or return its full price. If the price has increased since then, the money is returned taking into account the new cost of the item. If the price has fallen, then the full amount given at the time of purchase is returned (Article 18).

Advice for those who are already standing at the counter and holding their favorite sheepskin coat in their hands. What to pay attention to again:

1. Try on a sheepskin coat: it should sit flat on you, without “falling” back. If the item slips off the shoulders and onto the back, it means it is poorly sewn. And don’t buy into sellers’ assurances that this is how it should be.

2. Choose a model that fits your figure not tightly, but with some margin - leave room for a warm sweater! Raise your hands and make sure there is nothing stopping you from moving.

3. Lay the sheepskin coat on the counter with the wrong side up and press it with your hand along the entire length. All plates should be soft to the touch and have the same thickness.

4. Now let’s check how well the sheepskin coat is painted. Run the damp tip of a handkerchief along the chin. If the scarf gets dirty, it means the dyeing was of poor quality. Or, before sewing, the skins were stored for a long time in a dusty warehouse. In both cases, the sheepskin coat will stain the clothes. And after cleaning it may peel off.

5. If the fur on the inside is colored unevenly, if some plates are clearly darker and others are lighter, then after dry cleaning this defect will certainly intensify.

6. Check the quality of sewing: no protruding threads or crooked seams.

7. Intricate finishes (silver designs, halogen sparkles, etc.) don’t last long! In fact, you will buy a disposable item, all the beauty of which will disappear after the first cleaning. Maybe it's better to do without glitter and buy a classic model?

8. Pay attention to the edges: if they are made of artificial leather, they will crack and warp after dry cleaning.

9. Don’t trust sellers’ assurances that “this sheepskin coat is better because it has a water-repellent coating.” Such a coating simply does not exist - everyone is afraid of moisture.

ATTENTION! The average service life of a sheepskin coat is 3 years

Which "surface" is better?

Nikolai Orlovsky, commercial director of the factory for the production of leather and fur products “F. T.V. Golden Fleece":
– The outer surface of sheepskin coats can be divided into fur velor (suede) and surfaces with applied protective or decorative coatings (they look like leather in appearance). All coatings have both their pros and cons. Sheepskin coats made of fur velor get wet a little more than others, but are much less afraid of scratches. Sheepskin coats with coatings They can withstand wet weather easier and are easier to care for (for example, wipe with a slightly damp cloth). But they may still have scratches.

Care Tips

If the sheepskin coat is wet, it should be blotted with a dry cloth (do not rub!) and dried at room temperature, away from heating devices.
If the sheepskin coat is heavily wrinkled, it can be “ironed” with a regular iron. But only very carefully! Iron a completely dry sheepskin coat through a dry white cotton cloth. You need to set the iron to medium temperature.
Shoe care products are quite suitable for

With the onset of winter, it's time to think about purchasing a sheepskin coat. A sheepskin coat looks much more elegant than a down jacket. Ladies who spend a lot of time behind the wheel especially appreciate the benefits of a sheepskin coat.

However, in order for a sheepskin coat to please you with its qualities for more than one winter, you need to take its purchase seriously. Today, many low-quality, “glass” sheepskin coats are sold, which become unusable literally a month or two after they began to be worn.

To avoid such a bad purchase, we have put together the most important nuances that you should pay attention to. It will take some time, but you don’t want to give money for a cold and uncomfortable sheepskin coat?!

1) Skin

The surface of the sheepskin coat should be flat and smooth. Run your hand over it - you should not feel any rough areas at all, just a pleasant smoothness. If there are scratches, creases, marks of glue or fat on the surface of the skin, do not buy, such a sheepskin coat will not bring you joy.

Sharply squeeze part of the sheepskin coat in your palm and let go. A quality item should quickly return to its original form, without signs of creasing.

Place the item inside out and feel the thickness of the fur over the entire surface: it should be uniform in all areas.

Do you want to wear a sheepskin coat coated with a water-repellent layer? Correct solution. Inspect this layer: it should be thin and uniform, not sticky. You can check how well a thing repels water in a simple but reliable way - if you drop water on its surface, it will roll off without leaving a wet mark.

2) Fur

Check how neatly the fur is combed. The main thing is that it is not “shaggy” and is not combed in different directions, otherwise any clothes worn under the sheepskin coat will constantly twist. It is very uncomfortable!

The fur in the branded sheepskin coat has no bald spots. Its thickness is uniform, and if you tug on a tuft of fur unnoticed, it will not remain in your hand.

Take a piece of white fabric with you to the store or market. It will be useful to determine the uniformity of coloring of a future purchase. Just rub a white cloth over the fur in different places - a good thing will not give up even a drop of its paint, which means you will be insured against stains on your new sheepskin coat after the first rain or snowfall.

If the fur on a sheepskin coat is glued, after exposure to moisture such a fur coat will “stand up like a stake” and lose its shape. Determining the presence of glue is quite simple - you just need to shake the sheepskin coat and listen. If the manufacturer glued the fur, you will hear an unpleasant crunching sound.

The seams in a high-quality sheepskin coat are almost invisible; they are well hidden under the fur. Not a single hair of fur should be “caught” in the seam, otherwise the fabric will soon burst in this place, ruining the appearance of the product.

3) Cut

Having tried on the sheepskin coat, fasten it and raise one hand up. If the second shoulder remains in its place and is not warped, then everything is in order, the item is sewn correctly.

A model equipped with welt pockets should be checked to ensure that the edges of the pockets are carefully processed. Their corners must be firmly and securely fastened, otherwise they will quickly tear.

If you prefer a richly decorated item, make sure that the decorative elements are not glued, but sewn to the sheepskin coat. Glue is an unreliable thing; if you get caught in the rain or snow, you may miss a couple of flowers.
By the way, a natural sheepskin coat made from sheep fur and suede is not nearly as practical and convenient as modern crack or Kansas - they are no different in appearance from leather, but they are impregnated with special compounds that allow them to preserve the properties of the sheepskin coat for a long time. The only negative is that such things cannot be dry cleaned.

4) Which sheepskin coat should I choose?

The material used for sewing sheepskin coats is called fur velor. This is just for information.

So, the highest quality fur velor is produced in Russia and Turkey. Russian and Turkish sheep have thicker skins and also the thickest fur. Yes, such sheepskin coats are somewhat heavy, but they last much longer than others. And they will warm you much better, so for cold northern regions a natural sheepskin coat made of thick fur velor is just the thing.

By the way, thick velor is not suitable for a complex cut. This means that it is impossible to sew an elegant sheepskin coat from such material. If you are attracted by a complex, refined cut and many decorative details, give preference to Spanish or French fur velor. It is softer and lighter, and is often used to make amazingly beautiful, elegantly cut items. But - be careful! – in cold weather, unfortunately, such a sheepskin coat is considered inappropriate outerwear.

The latest “squeak” is considered to be lightweight models made from delicate lamb skins - sheepskin coats, jackets and cardigans. Such things weigh practically nothing; manufacturers cut the fur and cut off the cross layers from the skin to make the thing as light as possible.

Be careful in the pursuit of fashion - such a lovely little thing will decorate, but will not protect you from the cold!
Even if you really like the color white, don’t buy a snow-white sheepskin coat. It will turn yellow very quickly, and instead of pleasure it will bring you grief.

Try to buy a sheepskin coat in a store, and not at a clothing market. Here they will be able to provide you with a quality certificate, and this is still a guarantee.

Caring for a sheepskin coat

The sheepskin coat cannot be washed. The best cleaning option is using soap foam, which contains a minimal amount of alkali.

To remove a greasy stain, wipe the sheepskin coat with a solution of oxalic acid. You can sprinkle the stain with talcum powder, which should be gently shaken off after 5-10 minutes. It is recommended to remove greasy stains from suede surfaces with chloroform, gasoline or another solvent. You can use these products only if you are absolutely sure of the strength of the dye.

Never dry a wet sheepskin coat on a radiator! It should be carefully hung on hangers and placed in a well-ventilated area. The item should dry at room temperature.

Let the new thing serve you faithfully, protecting you from the cold and giving you a good mood.