The best products for cleaning a silver chain. How to clean a silver chain: effective methods and useful tips

Silver products always enjoy well-deserved popularity. They disinfect water, have a positive effect on overall well-being and look great. What can I say - noble metal! It has a huge number of advantages, but it still has the only drawback - it has a persistent tendency to darken. After all, oxidation from water and sun takes place in it. By following some rules, we will achieve the effect of initial splendor. We will try to describe all possible methods of purifying precious metal yourself at home.

How to clean a silver chain at home using toothpaste

It removes blackening perfectly. Squeeze out a pea-sized amount of paste from the tube, preferably with gentle bristles. Clean the chain carefully. Rinse it and don’t forget to wipe it with a natural cloth.

How to Clean a Silver Chain at Home Using Egg Yolk

Dip a cotton pad into the yolk and treat your precious item with it. After complete drying, wash with water. Your chain will not only look great, but will even stop darkening for a long time. The yolk protects against oxidizing agents that cause unwanted color changes.

How to clean a silver chain at home using baking soda, salt and foil

Cover the bottom of the pan with foil, and place the desired product on it. After the water boils, add 3 tbsp. l. soda, 2 tbsp. l. salt per liter of water. After the contents stop making noise, pour this mixture over the decoration. Wait until it boils, then remove from heat. Let cool for about fifteen minutes. You will be delighted with the results!

Soda and aluminum will begin their work and after about a quarter of an hour the darkening will disappear without a trace. The chain will sparkle better than the one you just purchased. Rinse, then dry.

Cleaning with hydrogen peroxide is dangerous!

Combine ammonia and hydrogen peroxide one to one, in equal proportions. Place a precious metal product there. It is better to cover the container tightly to save you from a very unpleasant aroma. The jewelry should be kept in this hellish mixture for 20 minutes, after which it should be thoroughly rinsed and dried.

But it's not safe! Cleaning silver with hydrogen peroxide is a risk that outweighs the benefits. After all, hydrogen peroxide can cause stains on silver, which will be very difficult to remove.

Cleansing with ammonia

Pour ammonia into a container with a lid. Close tightly so as not to injure your delicate sense of smell. Place the product in the container and shake as vigorously as possible. After all this, as usual, rinse it and wipe it dry.

How to Clean a Silver Chain at Home Using Dry Cleaning

Obviously, you can clean using dry or wet methods.

Dry methods are the following:

Place the chain on a cloth napkin, generously sprinkle it with baking soda, roll up the napkin and begin to rub very vigorously. Then take out the jewelry and wipe with a natural cloth, no need to rinse;

Dentifrice. The chain is massaged with a toothbrush coated with powder. Then rinse with water;

Rough fabric. You will need a thick, coarse cloth, and use it to rub the product;

A simple lipstick is one of the best versions of silver cleansing. Take any lipstick and cotton wool you don’t like. Rub the lipstick onto the chain as thoroughly as possible and it will sparkle right before your eyes.

Wet cleaning of silver

First, wash the product in water with soap and some dishwashing detergent added to it. We soak it, after a quarter of an hour we effectively clean it with a brush. This method does not always achieve the desired effect;

Lemon with vodka. This method works within 12 hours. Pour water into a bowl, add soap, vodka, lemon juice, a dessert spoon of each ingredient. We immerse our product in the resulting liquid. After the specified period, everything is rinsed and dried;

Alcohol and paste. This is also a good cleansing method. Mix alcohol, water and toothpaste. Mix all ingredients and dip the product into the solution for 30 minutes. After this, clean the jewelry with a soft toothbrush;

Use a cloth soaked in a 9% vinegar solution to vigorously wipe the chain. To achieve maximum results, keep in the same mixture for a couple of hours;

Coca Cola. Oddly enough, this drink is considered an effective means of cleaning silver. The products are placed in this healthy drink for several hours, and that’s it - unwanted darkening will be removed.

Basic rules for storing silver

When doing general cleaning at home, the chain also needs to be put aside to avoid damage and contamination;

When using medications if necessary, you must keep in mind that during treatment the composition of substances secreted by a person changes. Therefore, in this case it is advisable to set aside the silver for a more convenient occasion;

The jewelry should be regularly wiped with a soft cloth and kept separately from others, preferably in a box with fabric lining inside;

If silver is left idle for a long time, it is advisable to wipe it periodically;

After wearing it, you should wipe it with a soft cloth made of natural fabric to remove oxidation that has formed during the day;

After cleaning a precious metal item, you do not need to put it on immediately. It's better to wait until the next day. Cleaned jewelry should be placed on a soft cloth until completely dry.

Now we know what to do to avoid oxidation of your favorite jewelry. Of all the above methods, cleaning using soda and salt with foil turned out to be the best. Ammonia removes outdated contaminants in the most inaccessible places where the pattern is woven, and at the junction of the rings of the chain. Baking soda also gives a good cleansing effect.

In case you need to quickly clean the chain, do not hesitate to use toothpaste or powder. Don't rush to buy new ones - take care and properly care for your jewelry, and they will delight you for many years! Wear it with pleasure!

Silver is a beautiful, attractive, even mystical metal. Jewelry made from it is given special significance. Many believe that a silver chain conveys information about the physical and mental state of its owner, and if the silver has darkened, the person has health problems or has been jinxed. One may doubt the relationship between the appearance of a dark coating on silver and the state of health of the owner, but the owner will have to refresh the darkened metal in any case. If you don’t want to take your jewelry to a jeweler for cleaning, you can clean your silver chain using home methods.

Reasons for the formation of plaque on jewelry

Based on modern scientific information, the appearance of a gray, black, greenish or rusty coating on silver is caused by absolutely objective reasons, although some of them are related to the vital processes of the human body who regularly uses this jewelry.

The process of darkening silver is a chemical oxidation reaction, which results in the formation of a thin film of sulfur sulfide on the metal, sometimes with an admixture of copper or iron oxide, giving, respectively, greenish or yellowish tints.

Being an objective sluggish process, the oxidation of silver, however, can be accelerated by exposure to certain external factors on the metal, namely:

Constantly high air humidity;
Regular exposure to bright ultraviolet radiation;
Contact with chemical elements such as sulfur and hydrogen sulfide.

Since the presence of sulfur in human sweat has been scientifically proven, a person who constantly sweats will notice the tarnishing of his silver jewelry faster than one who is free from such a physiological defect. Increased sweating is typical for people who often catch colds, for the elderly and for those who take certain types of medications. These categories have to especially carefully monitor the condition of their silver jewelry.

Also at risk are athletes and people involved in physical labor, which is why it is not customary to give silver chains to football players or miners.

Hydrogen sulfide is present in some cosmetics, it can be dissolved in sea water and is found in the chemical industry. Therefore, it is recommended to remove the silver chain while relaxing at sea, when applying cream or when working with chemicals. Intense solar radiation is, on the one hand, the cause of active sweating of human skin, and on the other hand, it becomes a catalyst for the oxidative process.

The quality of the metal also matters. Oxidation occurs most slowly on the surface of 925 silver jewelry, or, as they say among jewelers, on the surface of sterling silver. Therefore, experts recommend this type of silver for everyday wear.

How to clean silver?

The plaque that appears on silver is sulfur sulfide; it is just a coating in the form of a film and can be removed even using home methods. That is why you can clean almost any silver jewelry and objects yourself, be it rings, bracelets, a cross or silverware.

However, the cleaning approach will vary depending on the quality of the metal, as rust or copper oxides may need to be removed at the same time. Cleaning can also be complicated by the presence of coatings or inserts that need to be properly cleaned. without disturbing the originality of the decoration.

There are quite a lot of ways to clean silver, so to decide which one to give preference to, you should read user reviews.

Peroxide

This method of purifying silver is very risky. This is due to the peculiarity of the chemical reaction between hydrogen peroxide and metal. Since the composition of a silver alloy can be completely unpredictable, it may contain components that will blacken even more when exposed to hydrogen peroxide.

A similar effect has been described many times in messages on jewelry forums, warning owners of silver jewelry against this cleaning method. The darkening can be partial or complete, but in any case the appearance of the chain will be hopelessly spoiled. At the same time, it is mentioned that in order to “save” the damaged product, the owner will have to contact a jewelry specialist, since it will be impossible to cope with such a reaction at home.

Since it is impossible to say absolutely exactly what kind of impurities are included in the composition of a particular silver alloy, then, at a minimum, you should not risk using a substance such as hydrogen peroxide to purify it.

In vinegar

Judging by the reviews of those who have tried this method, washing a silver chain in vinegar is quite safe. However, you need to remember that in this case we are talking about either a 9% solution of food vinegar, or a wine bite, which is filtered to remove sediment. It is dangerous to clean silver with vinegar essence or thick sediment that may be present in wine vinegar.

Vinegar does its job perfectly because it contains an acid, the concentration of which is sufficient to attack the sulfur sulfide film. At the same time, it is not capable of causing damage to such a soft metal as silver.

In the case where the silver chain has only minor stains, the easiest way is to wipe it with a soft cloth soaked in a vinegar solution and restore its original shine.

To remove more serious stains, you will need to apply more a radical method, which is designed to remove medium-sized contaminants:

The chain is placed in a plastic container;
Then a 9% solution of food vinegar is poured in, which completely covers the chain;
For exposure, either 20-30 minutes or up to one or two hours may be sufficient; you have to control the cleaning process visually;
The chain is then washed under running water and polished with a soft cloth.

The following method is suitable for dealing with significant darkening on the chain:

Heat table vinegar until boiling;
We lower the chain;
Remove the solution from the heat and leave for 15 minutes;
Using tweezers, remove the chain, rinse it under running water and leave to dry on a soft cloth.

Citric acid

Citric acid is not difficult to purchase at any grocery store.

This substance is often used to remove scale, as it has good cleaning properties, and therefore it is recommended to use it for cleaning silver jewelry.

It successfully affects the black plaque that appears on the chain. The process of its removal is an example of a mild chemical reaction, which requires carefully comply with all mandatory conditions.

Method No. 1, which is used for cleaning with citric acid, is simple; it is perfect for restoring lightly soiled silver jewelry, for example, a gray chain:

Pour half a liter of water into an enamel pan;
We dilute 30 grams in water. citric acid;
Bring the solution to a boil and turn it off;
Dip the chain into the hot solution and leave for half an hour;
Remove, rinse with water and wipe dry.

Method No. 2 is used for significantly darkened jewelry; it is also suitable for removing rust from a chain:

We dilute 20 gr. citric acid in 100 ml of water;
Place food foil on the bottom of a small enamel pan;
We place the blackened chain on the foil, wrap the edges of the foil so that the decoration is “in the envelope”;
Bring the mixture to a boil, then reduce the heat and continue to boil for 10 minutes;
The appearance of black or yellow flakes in the water is an indicator of the effectiveness of cleaning;
We remove the chain using tweezers, trying not to touch the flakes floating on the surface of the water, otherwise they will settle on the metal again;
We rinse the chain in running water, wipe it with a microfiber cloth, carefully polishing it.

Method No. 3 will help cope with significant contamination:

Dilute 20 g of citric acid in 100 ml of water, pour the resulting composition into a container for a water bath;
Place the chain in the prepared solution;
Then we lower a small piece of copper wire there;
Heat the solution in a water bath and boil for 30 minutes;
Carefully remove the chain from the hot solution;
We rinse the chain under running water and let it dry, wiping it with a soft microfiber cloth from time to time.

Other means

At home, you can remove blackness from a silver chain using many available means.

Ammonia

One of the very common techniques, as Internet users write, is to remove black deposits from silver using a solution of ammonia, which can be purchased at every pharmacy and used at home according to the recipe below:

In 100 ml of water, dilute 1 teaspoon of ammonia and a small amount of dishwashing detergent or liquid soap;
We place the darkened silver chain in the solution and keep it in it until the metal becomes lighter;
We wash the chain and wipe it dry with a soft cloth.

Salt

You can clean a tarnished silver chain quite quickly and effectively using regular table salt. The advantage of using this substance is that every housewife always has salt at hand. There are many ways to clean silver using salt. Among them there are very simple ones that are suitable for removing a small deposit from jewelry, but there are also quite complex ones that can restore the color of even a neglected product.

An important point in using salt is the issue of its quality, since salt with additives cannot be used to clean silver.

Place a chain on the surface of flannel or microfiber;
Sprinkle the decoration generously with table salt;
We roll up the fabric with its contents and place it at the bottom of a glass or plastic container;
Pour in water, completely covering the package, and leave for an hour or an hour and a half;
After removal, rinse the chain under running hot water, wipe and polish.

Method No. 2 will help to remove medium-level contaminants from chain links:

Place food foil on the bottom of a plastic container and place the chain on it;
Cover the decoration with salt mixed with baking soda (sodium bicarbonate) in equal proportions;
Close the edges of the foil and fill the package with hot water;
The exposure time is 1 hour, after which we take out the chain;
We rinse the jewelry under running water, wipe and polish with a soft cloth.

Non-standard methods

In addition to the above methods for removing plaque from silver jewelry, which users call reliable and proven, there are quite a lot of very unexpected ways to clean this metal on the Internet.

For example:

A method that uses raw potatoes. 1 potato is grated on a fine grater, the juice is squeezed out, in which the chain is soaked until the desired effect is obtained;
A method that uses potato broth, in which the decoration is “cooked” for half an hour;
A method in which the chain is placed in food foil, placed on the bottom of a pan and poured with hot potato broth, leaving to act for 20 minutes;
A method using Coca-Cola, in which the chain is simply filled with a fresh drink and left in this state for 1 hour.

How to save a badly blackened chain?

In the event that the chain is very seriously soiled or if the owner of the jewelry does not trust home cleaning methods, he can always purchase one of professional cleaning products for silver, which are offered in every jewelry store.

Sunlight Jewelry Cleaner

The manufacturer positions this product as a safe and effective composition for quickly cleaning silver jewelry. Judging by customer reviews, this drug copes with its task with a C grade. The cost of a 100 ml bottle is from 250 rubles to 500 rubles.

Font

A solution that has a high acidic composition, and therefore is able to clean a silver chain very quickly and efficiently. You need to use this composition with gloves, and use tweezers to lower and remove the product. The cost of 50 ml is about 60 rubles.

Aladdin

This product is reusable, it cleans the jewelry literally within a minute, and protects against the appearance of plaque for some time, as evidenced by customer reviews. The cost of 50 ml of the product is approximately 64 rubles.

Leuchtturm

This product cleans not only black, but also green deposits from the surface of silver. Many users are satisfied with it, but advise not to leave the chain in this composition for more than half a minute. After cleaning, Leuchtturm creates an invisible protective film on the surface of the chain, thanks to which the shining appearance of the jewelry is preserved for a long time. The product costs about 400 rubles for 250 ml.

585

One of the effective ways to restore blackened silver jewelry is the following:

We place the chain on a piece of food foil, sprinkle it generously with salt and wrap it in an “envelope”;
Pour a soap solution into the pan, prepared from 1 teaspoon of any soap, grated on a fine grater (it is best to use laundry soap) and 200 ml of water;
Place the package with the chain in the soapy solution;
Bring the solution to boiling temperature, then reduce the heat and continue to boil for 15 minutes.
Remove the chain from the hot solution using tongs and leave it until it cools completely;
We wash the cooled chain under running water, wipe and polish.

Silver items can only be cleaned with mild abrasives. To do this, use baking soda, chalk, and tooth powder. A silver chain can be easily cleaned from blackness at home if it is completely immersed in olive oil. Leave for twenty minutes, then rinse thoroughly in a soapy solution, and rinse the metal product first with cold, clean water, then pour over with boiling water. Silver metal and many other products and solutions can be used to clean silver metal.

Cleaning your silver item

The chain should be cleaned of dust when it has darkened and some of its places have turned black without causing harm. Many jewelry departments sell special cleaning products, which include paste, soap, and wet wipes. They are not aggressive towards metal, they can be used to remove various blackening from a cross, chain, bracelet and rings.

But at home you don’t always have cleaning products on hand, so you can use affordable folk remedies to gently clean a silver chain. Toothpaste that does not contain colored inclusions in the form of strips of different colors will help clean the chain:

1. You need to take a small container and put a silver chain in it.
2. Squeeze white toothpaste from the tube, gently rub with a soft toothbrush and rinse with running water, ensuring the product is clean.
3. To dry, use woolen cloth or flannel.

If the metal of the item on the jewelry has darkened, then together with the chain you can clean silver rings, a cross, a bracelet quickly and effectively, you need to use ammonia, which must be diluted with clean water, the proportion should be 1:1. You need to take a gauze cloth, soak a piece in this solution and wipe the products. It is not recommended to use cotton pads for cleaning jewelry; during the cleaning process, cotton clogs the space between the links of objects and is then difficult to remove.

If the blackening is not cleared off in one go, then you should immerse all these things in the solution and leave for 10 minutes until everything comes off. After cleaning your silver items, you should wipe and dry them.

Using effective ways to renew decorations

You can clean a silver chain at home in another way:

1. Take a piece of chalk.
2. Crush it in a mortar.
3. Add ammonia.
4. Make a soft paste.
5. Apply it to the surface of the product and rub gently. You should use a soft toothbrush to clean the spaces between the links of the product fragments when rinsing with water.

The most common method is to bleach the blackened chain using a mild abrasive:

1. Place a teaspoon of baking soda powder in a bowl.
2. Add water until a thick mixture is obtained.
3. Place the product there.
4. Rub with a soft bristle brush. Rinse with clean water to remove any remaining mixture. Wipe with a woolen cloth until the decoration shines. If you don’t have soda in the house, you can replace it with tooth powder, which is an effective remedy.

Product renewal with acid

Products blackened by iodine are cleaned with various acids. Chains and other silver items that have stains can be removed with the following product:

1. Take one lemon.
2. Squeeze the juice out of it.
3. Soak the product in lemon juice for 15 minutes.
4. Wipe off the juice-treated decoration.

Lemon can be replaced with citric acid powder. The proportion consists of one teaspoon per 100 g of pure water.

Regular 9% table vinegar cleans the surface of the chain:

1. You need to pour a little vinegar into the container so that the chain is completely immersed in this solution.
2. Dip the product in vinegar and wipe with a cloth. All blackness dissolves.
3. If the stains remain, you should repeat cleaning the jewelry in vinegar until the stains completely disappear.

It is good to clean silver with Coca-Cola.

You can dilute ammonia in a soap solution (take a teaspoon of ammonia in proportion to a glass of solution), which can be replaced with ammonia. Leave the product in the solution for thirty minutes, then wash and dry. Rub with a wool cloth until the product shines. If you rinse the jewelry with soapy water after each wear, the chain will not turn black and will always shine.

Effective ways to clean a silver cross at home

Unusual ways

Prepare a cleaning solution at home:

1. Take a container for the composition.
2. Add one tablespoon of the following: lemon juice, vodka, dishwashing detergent.
3. Stir all ingredients and immerse the silver chain in this solution.
4. Leave the product to soak until the morning, then rinse with clean water and pour over boiling water. Clean dry decoration until shiny.

You can use foil to remove blackening. To do this, completely cover the bottom of the pan with foil. Place the silver jewelry there, fill the container with water and soda, take two teaspoons of baking soda powder per 100 g of water. Boil for five minutes from the moment of boiling. Turn off and leave in the solution for 10 minutes. Then rinse with clean water and dry.

To avoid the boiling procedure, you should immerse the silver chain in potato broth. You need to pour this broth into the container where the foil is located for 15 minutes, the blackening will quickly dissolve and the chain will sparkle.

Using proven hot methods

Salt is considered a universal cleaner for various metals, including silver:

1. You need to add a tablespoon of rock salt to a glass of water.
2. Stir until the salt dissolves.
3. Load the chain so that the solution completely covers the product.
4. Leave the chain in the salty solution for two hours.
5. After this, put the solution with the product on the fire, close the lid. Boil it directly in this liquid for 10 minutes.
6. Then the water needs to be drained, the silver should be washed in cold running water and dried well.

The effect of cleaning a silver chain can be obtained by using the following recipe:

1. Make a soap solution consisting of 30 g of laundry soap and 100 g of water.
2. Heat the water a little.
3. Rub the soap on a fine grater and dissolve in water.
4. Leave the chain for 30 minutes in the prepared solution, then rub all the chain links in the same solution with a toothbrush, rinse well in cold water, pour over boiling water, then wipe dry.

If stored for a long time in places with high humidity, the chain may not only become covered with a black coating, but also spots with a greenish tint will appear on its surface. To remove them, you need to boil silver jewelry for five minutes in a soap solution in the proportion of 100 g of liquid per 20 g of soap with the addition of a pinch of baking soda. Then rinse with clean water and dry well. Wipe the chain with a flannel cloth until it shines.

The appearance of a chain and rings with a bracelet, a silver cross will become more attractive if you boil them in a glass of milk with a pinch of soda. This old method effectively cleanses all silver items. After boiling for ten minutes, the silver will lighten and shine.

Having bought a silver chain, after some time we are faced with the following problem: the silver becomes darker. Many people immediately have suspicions about quality. But in most cases there is nothing to worry about - darkening (oxidation) is a natural process for this type of jewelry.

Blackened metal does not have the beauty and shine of new. Chains are especially susceptible to this unpleasant process, since they have the largest surface of contact with the body. Therefore, an important question arises: how to clean a silver chain from blackness and return it to its original appearance.

This is useful:

There are several very effective ways to remove blackheads at home, without significant costs. The choice of cleaning method depends on the degree of blackening of the product.

How to clean black with citric acid.

This method is used for chains with a very high degree of contamination.

Dissolve the sachet of citric acid.
Place the silver in the container.
Boil for 5-10 minutes.
Let it stand for half an hour.
We take out the chain and rinse it under the tap.

At this stage, the decoration has noticeably whitened, but does not shine, we perform the following procedure:

Fill a liquid soap bottle with 50-100 ml of warm water and add 20-30 ml of detergent.

Lower the chain, close it, stir vigorously for 5-10 minutes.

We wash it and wipe it dry.

This method cannot be used for blackened chains, since the acid will remove not only dirt, but also blackening.

How to clean silver from blackness with ammonia (video).

This method is also used for highly contaminated products:

Fill a stainless steel bowl with 0.5 liters of liquid.
Pour 30-50 ml of detergent.
Boil for 5-10 minutes.
Add 10-20 ml of ammonia.
Leave in the solution for a quarter of an hour.
We take it out and wash it.
Fill a liquid soap bottle with 50-100 ml of warm water and add 20-30 ml of gel.
Place the chain there, close and stir vigorously for 5-10 minutes.
Rinse under the tap.

Depending on the degree of blackening, the boiling and soaking process can be extended or re-cleaned.

Darkening of silver items is not only oxidation, but also simple household contamination with soap, creams, and sweat. Jewelry made from this noble metal requires constant care.

It is necessary to perform a simple cleaning of blackness at home approximately once a month.

Fill a stainless steel bowl with 0.5 liters of water.
Add 30-50 ml of detergent.
Place the silver chain in the container.
Boil for 5-10 minutes.
Leave in the hot solution for a quarter of an hour.
We get the chain.
Fill a liquid soap bottle with 50-100 ml of warm liquid and add 20-30 ml of detergent.
Lower, close and stir vigorously for 5-10 minutes.
We remove the chain and rinse it under the tap.

There are home cleaning methods using baking soda, salt, tooth powder and even ash. As you know, silver is a very soft metal, so the use of substances that are abrasive in structure will cause significant damage in the form of micro scratches. After such cleaning, the lost beauty can only be restored through mechanical grinding and polishing.

The methods described provide a complete answer to the question: how to clean a silver chain at home. The video also shows how effective one of the described methods is.

Regular care and cleaning using simple procedures will ensure that the jewelry you buy will always be like new, delighting you with its whiteness and shine. In addition, there are a number of factors that affect how quickly a product will lose its beauty, some of them are outlined in the article.

Silver jewelry and cutlery made from this metal are found in every home, however, due to exposure to water and prolonged contact with the skin, they blacken and tarnish. Therefore, sometimes it is necessary to wash them with special products or have them cleaned by professionals.

You can clean blackness from a silver chain at home using traditional methods.

Dry

Dry cleaning an earring or ring involves using only dry powders. In this case, you do not need to use water. What to clean with? For dry processing of jewelry, use baking soda, tooth powder or cloth.

Baking soda

You can renew blackened jewelry using regular soda. It's inexpensive, but it helps a lot.

How to clean a silver chain:

Place baking soda on a cloth napkin.
Place the jewelry in it, wrap it and actively rub it with your fingers.
You can pinch the material with your hand and pull the chain through it. If you are cleaning your ring, a toothbrush will do.

Finally, remove the remaining soda and wipe the jewelry with a flannel cloth.

Tooth powder or paste

Silver items can be easily cleaned with an oral cleaner. These are abrasive substances that can remove plaque and tartar from jewelry.

Toothpaste is easily washed out of hard-to-reach places; it can be used for any products, including those with pebbles. It does not scratch the product and removes plaque perfectly.

How to clean a silver ring:

Take a soft-bristled toothbrush and apply toothpaste or powder to it.
Clean your silver item carefully. The bristles of the brush will penetrate even into decorated weaves.
Finally, clean the jewelry of any remaining product.
Rub with a microfiber cloth until squeaky and shiny.

If this method of cleansing fails, you can add a few drops of ammonia to the tooth powder. The algorithm of actions is the same.

Wet

Wet cleaning of silver jewelry involves boiling, soaking in special solutions and rinsing with clean water.

What to clean with?

Use ammonia, lemon juice, saline solution and other means suitable for this procedure.

Ammonia

You can clean a silver chain at home using ammonia. An aqueous solution of ammonium hydroxide is an excellent solvent.

As a result, the blackening goes away, the plaque is removed, but the silver itself remains unharmed.

Gold can also be purified using this method. But you cannot put both gold and silver in the same container. An ionization process may occur. This means that silver will turn yellow and gold white.

Take ammonia and dilute it with water in a ratio of 1:10. Place silver jewelry in the solution. After half an hour, wash off the blackness with a sponge and wipe with a dry cloth.

Foil and citric acid

The bottom of a shallow container is covered with foil, warm water is poured into it, about 3-4 cm. Then 2 tbsp is poured into the container. l. citric acid and put decorations there.

Place the container on the stove and boil for 2-3 minutes over low heat.

Finish the cleaning procedure by wiping the jewelry with a clean soft cloth.

Lemon juice

Cleaning a silver chain at home will not take much time and will not cause any trouble if you have at least 1 lemon in the refrigerator. This citrus contains acids that corrode blackness and remove plaque from any product.

How to clean?

Squeeze the juice of 1 lemon and pour into a glass or plastic container. Place silver jewelry in the container and leave it alone for 30 minutes.

Then rinse them in cool water, dry them with a cloth and place them on a towel so that the liquid evaporates from hard-to-reach places.

Salt

Saline solution also copes well with this issue. If there is a need to restore silver’s purity and shine, prepare a concentrated liquid.

How to clean silver chains at home:

For a glass of water there is 1 tbsp. l. salt.
The solution is poured into an enamel container and brought to a boil.
After the liquid has boiled, turn off the stove, and place all the silver jewelry in the container and wait until the solution cools.
After cooling, remove the jewelry with tongs (if there are small scratches on your hands, the salt will penetrate into them and will sting strongly) or wearing rubber gloves.
All that remains is to dry the silver.

To make the process go faster and more efficiently, balls of foil are added to the hot brine.

Coca-Cola is not only a tasty drink, but also healthy. This cleaning product is used to remove rust, carbon deposits and scale, and can also be used to clean silver items if they have become blackened.

To give your jewelry its former shine, simply dip it in a glass of Coca-Cola for 2 hours.

Then the silver is washed with water and dried with a flannel cloth. This solution can quickly clean rings and chains.

Olive oil

Silver items can be cleaned using olive oil. Soak a cotton pad in the liquid and wipe the jewelry.

The items to be cleaned should be washed with hot water, as olive oil is fatty, and placed on a dry towel to dry.

Egg yolk

You will need to separate the yolk from the white. Then take a cotton swab, soak it in the chicken product and actively rub the decoration.

You need to leave the egg on the ring for 15 minutes. After which the yolk is washed off with water and the decoration is wiped dry.

This method is not only capable of cleaning a silver cross at home, it protects the jewelry from oxides that cause darkening.

Potato peel

One of the good cleaning methods is boiling. This method will not damage the decoration and is perfect for such purposes.

How to clean silver earrings, rings or chain?

In the pan in which the potatoes were boiled, place the peel of the vegetable, previously washed to remove dirt.

After the liquid boils, place all the silver jewelry there and boil over low heat for 20 minutes.

You cannot boil jewelry made of such metal if there are inserts of stones, even small ones.

After the procedure is completed, the liquid is drained, the silver is taken out, and wiped dry with a soft cloth.

If you don’t have time to monitor the boiling, you can use another peeling method using potatoes.

Algorithm of actions:

Take a ceramic container and put foil on the bottom.
Then the decorations are placed.
Pour hot water over jewelry after boiling potatoes.
Leave for 15 minutes.

Finally, you should clean your silver jewelry with a toothbrush to remove dirt in hard-to-reach places and wipe dry with a cloth.

Stationery eraser

Rings, crosses and earrings that have smooth surfaces without decoration can be updated with a regular eraser for erasing pencils from paper.

How to clean a cross?

Use a regular eraser to go over the silver surface until the desired result is obtained. The eraser is very soft and will not cause scratches. You can also use it to tidy up your cutlery.

A good cleanser. These cosmetics contain titanium dioxide and a lot of fat. The first substance perfectly removes all dirt, and the second polishes it to a shine.

How to clean a silver cross or ring:

Using a cotton pad, apply lipstick to the jewelry.
Rub until all blackness disappears and dirt is removed.
In the end, the metal should not only sparkle, but also creak. This means that all dirt has been removed.

By looking at the cotton pad after cleaning, you can see that it has turned black. The only drawback of this method is that it can only be used on smooth surfaces. Carved rings and earrings with stones cannot be processed using this method.

The lipstick will get stuck in all possible crevices and can only be removed with water and water, and this is not advisable to use for silver. After all, due to humidity, it will begin to turn black again.

Professional products

You can buy special products in stores or online that are designed to clean silver jewelry.

CONNOISSEURS. The product is a liquid solution and comes with a basket and brush for easy cleaning. CONNOISSEURS is poured into a basket and the jewelry is placed there for 10 seconds. Hard-to-reach areas are treated with a brush, then washed in water and soapy water and wiped with a dry cloth.
To polish silver jewelry, wipes with special impregnation are suitable. They remove dirt reliably and quickly, and also polish rings and chains.
There are also cleaning wipes for silver. A good product is from Talisman. The jewelry is wiped with napkins; they remove the dark deposits formed during wear. It is enough to walk around the ring several times to make it sparkle and shine in the sun again.
Aladdin Silver Cleaning Solution has good reviews and is popular. This product is very economical; after using it, the used liquid is not poured out, but can be poured back into a jar and reused. The only negative is that rings and earrings with coral, pearls and amber cannot be processed in this liquid.

Silver items can be cleaned at home. However, if the jewelry has stones, it is better to use the services of specialists and take the chain to a jewelry store that provides such a service.

To prevent silver from darkening, you need to know that you cannot use perfumes, creams and powders on the skin where you plan to wear the jewelry. You should also clean it twice a month to avoid metal oxidation and blackening, because it’s easier to get rid of small deposits.