Knitting from newspaper tubes. Weaving from newspaper tubes. Craft basics and creative ideas

The history of paper goes back more than 3.5 thousand years. Initially it was papyrus, then parchment. However, China is considered to be the birthplace of paper. Technologies changed, years flew by. Paper was improved, and finally, in the recent past, a new, old type of needlework arose.

Since ancient times, everyone has known this type of needlework as “wicker weaving”. Based on this, the idea arose to create beautiful and high-quality weaving from newspaper tubes. This type of needlework incurs virtually no costs. There are a lot of newspapers in our lives; almost every day we find tons of waste paper in mailboxes. Dare and try. Very exciting.

Anything can be woven from paper, toys, chests and baskets, boxes for bed linen and jewelry boxes, flower vases and coasters, rugs and napkins. It all depends only on you and your desire to create. Every beginner can learn how to make beautiful and original braids; all you have to do is want to, but we will help you in weaving from newspaper tubes by showing you step-by-step the tutorials that we have prepared for beginners.

Braids made from newspaper are an excellent gift; they are original and exclusive. They can be decorated with rhinestones and stones, painted in any color, or given a shade of noble wood. The tools you will need for this exciting process are very simple. These are scissors, glue, unnecessary newspapers, a ruler and a thin knitting needle, paints for coloring and a special varnish that fixes the finished product.

A couple of video lessons to warm up

First of all, let's move on to the simplest thing, to understanding how newspaper tubes are woven in general, for this we suggest watching the following training videos.

So, if you carefully watched the video, let’s move on to the most important thing, that is, to the beginning of the painstaking work. Be patient, be diligent and the result will please you. I hope in the future this type of hobby will become yours.

Lessons on weaving from newspaper tubes for beginners step by step with photos

Today in the master class for beginners there will be a box made of newspaper tubes. In this master class, Natalya Soboleva will tell you and show you, using her example, how to make the most ordinary, but very original box from newspaper tubes so that you can put children’s toys in it. After reading the article, you will learn how to make a box from newspaper tubes

- Master class for beginners - a box of newspaper tubes.

To make a box from newspaper tubes, you will need diligence, but the result is worth it - the thing will last for many years and will give the interior a special charm.

For the base, I take an unnecessary cardboard box, medium size, you can take any one, the procedure does not depend on it.

Let's prepare materials:

Box.
Newspapers, magazines (distributed for free in various shopping centers).
PVA glue.
Water (or alcohol) stain.
Adhesive tape.
Ruler.
Wallpaper trims.
Stationery knife or scissors.
Along the way, we added fabric for finishing, but you can do without it.

Also in the process we will learn how to make a simple bend.

#1. Step one: make tubes from newspapers

Old newspapers became the main material for a box of newspaper tubes; magazines can be used to make racks.

I cut it with scissors or a knife, there is no fundamental difference, a knife is a little faster.

It needs to be allowed to dry thoroughly; mine sat overnight.

We glue the lid to the bottom, which was previously cut off from the box. Now the racks are securely hidden, they are not in danger. You can start weaving.

#4. Weaving.

In order for the weaving of a box made of newspaper tubes to look beautiful, the racks must be constantly adjusted: pulled up and leveled.

At the corners I do the usual weaving; a double turn around the posts seems ugly to me.

You just need to move the corners down a little so that they are level with the rest of the weaving.

The weaving of the box from newspaper tubes should be tight so that the base does not show through.

We continue to work until we reach the top.

It's time to make the bend; it doesn't require long posts; I then had to trim off the excess.

Then we pass each free tube in front of the adjacent one and place it under the next one.

All the tubes are inside.

We hide them between the weaving and the walls of the box.

The weaving of the box from newspaper tubes is finished, all that remains is the finishing.

#5. Box finishing.

Water stain gives the paper a wood-like color.

To achieve a darker color, you need to dye several times.

I glue a piece of unnecessary wallpaper to the bottom of the box, let it dry, then cover it with varnish.

Since the racks went inside, the box noticeably moved away from the weaving, so I additionally glued the base and outer walls.

And since there was finishing at the bottom, I decided to put it on the top as well.

I sewed it by hand, I didn’t have a machine, but it took a little time. I planted it on glue.

#6. Step six. Final stage- varnish coating. I like the usual construction material in glass bottles better, it gives good strength and shine, but it is impossible to work with it in a residential area. Therefore, if there is no workshop, the only option is acrylic varnish.

This box holds not only toys, but also books, it is very convenient, the child really likes the fact that the thing was made especially for him.

The history of weaving dates back to ancient times, but using newspapers as a source material is a relatively new method. Once you try to weave a product from newspapers yourself, you won’t be able to stop!

The technique of weaving from newspaper tubes is a relatively new type of needlework, accessible to anyone who finds a little time to study the basics of this simple art. Affordable raw materials - newspapers - are easy to find in your own mailbox, which is regularly filled with advertising materials and other free publications. We have already written about that, and today we will talk about how to learn how to weave useful things for the home and as gifts.

Where it all began

Archaeologists found products using the weaving technique during excavations in Eurasia and Africa. It is believed that during the Neolithic period people had already mastered this type of craft and created household items from leaves and stems of plants. In ancient times, vines and tree roots were used to make products used in everyday life.

In the 19th and 20th centuries, people made roofs, fences, and furniture using the weaving method. Contemporaries hearing about this technique are presented with rattan furniture for country houses and dachas, willow equipment, and birch bark souvenirs.

But the range can be much wider! Moreover, you can create designer items yourself, using paper rather than wicker!

Weaving from newspapers: minimum cost - maximum benefit

To start weaving from newspapers you will need a minimum of materials and tools:

newspapers;
a knitting needle or other thin object onto which newspapers will be wound to give them the shape of tubes (the thickness of the tubes depends on the thickness of the knitting needle);
glue (PVA, paper) to secure the edges of the tubes;
scissors;
brushes for glue and paints;
wood varnish, for coating finished products with it in order to give color and strength;
paints (optional).

Weaving from newspapers is so simple and exciting that anyone can do it, regardless of gender and age. Involve your children or your significant other in the activity. Your child will be delighted when the first craft is completed! There is nothing more beautiful than a burning gaze, thirsty for new discoveries.

At the same time, creativity unites you together, calms you down, develops hand motor skills, a sense of aesthetics, tactile memory, and imagination.

Basics of paper weaving techniques

As they say, a good start is half the battle. With a good mood and faith in a bright future, let's start making preparations.

Prepare the straws. Sheets of newspapers need to be cut lengthwise into strips of 5-10 cm. They should be long. Then, roll the newspaper into a tube, holding the knitting needle at an angle of 45*. The ends need to be glued together with glue, and only then remove the knitting needle.
If you want to weave from strips, then you need to “flatten the tubes” by walking over them with a rolling pin several times or ironing them.
If you want the product to have any shade, paint the blanks with paint in advance and dry. There are several secrets here:

Watercolors fade after painting.
Gouache gives rich shades, but it is diluted a little with water before use.
Acrylic paint adds gloss and polishing effect. It is better to use it for painting the finished product, otherwise the workpieces will lose flexibility and “break.” Before starting work, also dilute with water.
Wood varnish has different shades. Varnishing is done in several layers, but only for finished work. After this, the products become durable and look as if they were woven from real wicker.
You can also use food dyes, spray paint, water-based paint and others for painting. Each of them will give the product its own “zest”.
Finished products can be supplemented with covers, decorative details, and decorated.

Learn and try different weaving methods. Start from simple to complex. Make items that don't require a lot of experience first. You will see how even the smallest victories will bring great joy.
Watch master classes, read literature, come up with your own ideas, and be smart. Listen to the ideas of loved ones! You will definitely succeed!

Methods of weaving products

Let's look at several weaving methods. They are all pretty simple. The main thing is to be patient.

Twist in a spiral (think of a roll of electrical tape). Even a preschooler can master it.
Layer weaving. One tube runs in front of the stand, the other behind. For more understanding, take a closer look at the cotton fabric.
Rope weaving. Based on the interweaving of bundles with stands and with each other.
Spiral weaving. Not to be confused with twisting! The technique involves weaving at a certain angle.
Pigtail. There is an edge and an invoice. In the first case, the racks are woven counterclockwise, bringing the ends of the bundles either inward or outward. In the second case, several additional convolutions are used, which are intertwined with the edge.
Openwork weaving. This is a synthesis of complex and simple techniques. Looks like lace.

Of course, not all weaving techniques are listed here. If you decide to learn this skill, then look at additional literature or videos on this type of needlework.

What can you weave from newspaper?

Recently, it has been fashionable to have handmade products in the interior design of an apartment or to give them to friends. Wickerwork plays an important role here. Photo frames, coasters for plates, vases, flowerpots, chests and boxes for storing jewelry and other nice little things, clutches and much more look very original.

You can also make wicker equipment for the household: laundry baskets, trash cans, baskets for storing food products, baskets for shopping, bread bins. And don't be afraid that they will fall apart. Covered with several layers of glue, paint, varnish, they become quite durable.

If you still doubt whether you should try it, read, which creates real masterpieces from newspapers and willingly shares its secrets and ideas.

How to become famous and make money from a hobby

Take part in an exhibition or fair of folk art products. There are always a lot of people at such events. There are also local media here that can write a note about you in the newspaper. Make business cards and feel free to hand them out to people. More PR won't hurt.

Post advertisements for sales on the Internet, create pages on social networks, join communities of interest or create your own, communicate on handicraft forums. The World Wide Web provides great opportunities.

Negotiate with local cultural centers, clubs, and schools to conduct master classes. Perhaps you will be offered a job organizing a circle or you yourself will recruit a group of people who want to do this type of needlework.

If you take up handicrafts, remember: the realization that your work brings benefit and joy to people, and that the income, albeit small, gives you a sense of peace of mind. What else do we need in life? Live in harmony - do what you love!

Wicker items have been popular at all times. Only earlier they used birch bark, wicker, and willow twigs, but now they are replaced with ordinary newspaper, magazine and office sheets. Such products are coated with stain and varnish, thereby creating an imitation of the structure of wood.

This is the popular Master class for beginners will be devoted to the basics of this craft, since the information on it is scattered in pieces from various sources, and all the available lessons on weaving crafts are designed for people with basic knowledge.

Material

For weaving you will need paper, knitting needles, paint, stain, varnish, cardboard, glue. Newspapers, magazines, office and fax paper are suitable for the work. Softer tubes are made from newspaper, and thinner, elastic tubes are made from magazines and office paper.

Please note: from one newspaper spread you should get four tubes (the width of the segment is no more than 7-12 centimeters). Cut narrow strips 2-3 centimeters wide from office paper.

Experiment with different types of material, then you will get an extraordinary paper weave. You can create a wide variety of crafts using this technique - from trays and panels to animal figurines and dishes.

Craftsmen use knitting needles of different thicknesses. The selection depends on the craft: for example, for a newspaper you need a knitting needle No. 2-3, and for office paper - a stocking needle. For the base of the craft, twist thick tubes, and for the braid - soft ones.

Choose a water-based paint or stain (alcohol-based product dries quickly, but makes the tube brittle). Thin the paint with PVA glue (2:1 or 3:1). Either the product is painted after work, or the blanks are painted before the creative process begins. But the finished craft is always coated with glue and left to dry. Only at the last stage is it coated with varnish. Cardboard is used to create a finished bottom or container of the desired shape.

Paper weaving: master class for beginners

How to prepare the tubes:

The tubes should not be soft or hard; ideally, a “medium” paper weave is obtained. There are a lot of video tutorials on twisting for beginners, but without practice they are useless. For example, for blinds and panels, craftsmen specially twist hard sticks; for decorative miniature objects, they prepare thin tubes, where the width of the strip can be less than the traditional seven centimeters. You need to experiment to find your own thickness of tubes.

Please note that when cutting with a knife, nicks are formed that interfere with proper twisting. Therefore, before work, do research: try cutting two sheets of newspaper into transverse and longitudinal strips, determining which method produces fewer notches. It is from the segment with smaller notches that the tube rolls without problems.

Paper weaving: step-by-step instructions for twisting and painting

When twisting sticks, one end should be wider and the other narrower. So, when weaving crafts, a build-up occurs due to insertion, that is, a narrow corner is inserted into a wide one. If the ends are the same, then one edge is flattened, compressed and inserted.

Many artists do without glue when doing extensions; they simply insert a stick three centimeters deep into another. Other pros drop a drop of glue into a tube with a wide end, and push it three centimeters with a narrow stick.

There is also a secret how to make the twisting go faster and the weaving to be soft. Before work, newspaper tubes are laid out in a row and rolled over them with a rolling pin. It turns out that each craftsman has his own paper weaving.

Master class for beginners on painting tubes

First way. Paint the sheets before work, then dry them, cut them into strips and roll them into tubes.
Second way. Twist the sticks, then paint each one individually with a brush. Suitable for products that require an unusual pattern.
Third way. You make a craft, then decorate it using weaving or randomly with a brush.

Mass painting methods

For paint you can use water emulsion, pigments, for eggs. If the color turns out to be unsuccessful, continue weaving from paper anyway. A basket, for example, can have any color, just complicate the weaving or resort to decoupage.

Secrets for working with straws

Please note that the color becomes lighter as it dries. By combining with other sticks, you create the desired pattern or paint the finished product with the desired shade. Do not dry until completely dry. Wrap the slightly damp sticks in a bag so that both ends are outside. In winter they can be stored in the cold.

When working, the sticks must be flexible, but after painting they become hard and brittle. Ideally, paper weaving should begin immediately after painting the tubes. A basket, boxes, and dishes can be made from dry painted tubes if, before work, you spray the middle of the sticks with plain water using a sprayer on all sides.

Wrap them in a wet cloth (ends outside) or put them in a bag. Prepare a large number of tubes at once, so as not to be distracted by twisting while working.

When weaving, an even and odd number of tubes are taken. It is in the side where the odd number of sticks is where the work begins. The “odd” tube entwines all the others. As soon as its length ends, grow a new stick.

Types of weaving

We've finished with the material preparations, now let's look at paper weaving. A master class for beginners on its technique is given below.

Simple ordinary weaving. With a braiding tube, like a snake, go around each base stick. That is, it either covers the base or hides behind it. If you need to go back, the weaving goes the same way, but in the opposite direction.
Simple weaving in rows. The pattern changes after several rows. That is, take one stick and go through a simple weave. The next tube is laid in the same way as the first. Continue this way several times. Then you shift the pattern, that is, where the base was braided, it remains free, and the next one is braided the same number of times as in the first pattern.
Simple diagonal weave. Each tube starts with a new base stick diagonally. The result is an oblique (oblique) pattern.
Simple diagonal weaving in rows. Just as in a horizontal pattern, you weave with several sticks, and move the new circle along the pattern.

Types of weaving

We continue to look at paper weaving (master class on creating patterns):

Weaving techniques and secrets

To keep any pattern, it is braided with a rope or a braid. Let's take a closer look at the “protective” paper weaving (we will describe it step by step using the example of a basket).

Please note that weaving the tubes starts from the thick ends from left to right. To get the desired shape, the stands are pinched to the desired object (vase, bucket, box, etc.). The finished product is generously smeared with PVA glue (with or without paint), “put on” the item of the desired shape, and dried. Then, when painted and varnished, the product made from tubes will be beautiful and durable.

Making a basket

For beginners, it’s better to start with something simple (for example, blinds, frames, panels) to train your hand in twisting the tubes and weaving them together. Then you can move on to complex paper weaving (horseshoe, heart, box, bell). Consider a master class on weaving a simple basket without a lid or handle.

To save labor on weaving the basket, use a cardboard bottom. To do this, take an object of the desired shape and trace the bottom on thick cardboard. Cut out two pieces. Decorate them right away (cover them with wallpaper, paint them or use decoupage).

Attach the bottom half along the edge. Now glue the newspaper tubes onto it. The distance between them should not be more than 2-3 centimeters. This is the basic rule of such needlework (meaning paper weaving).

A stand for pens, a photo frame, a hat - any craft should have a distance between the posts of no more than three centimeters. The fact is that a larger gap between them leads to looseness and fragility of the product.

Continuation of basket weaving

Next, apply PVA glue to the bottom with the tubes, cover it with the second bottom, place a weight on top and leave it overnight. Now go through two rows with a “rope”, a simple interweaving of the racks. After this, place the form on the bottom along which you will weave, with a weight (the weight is needed to fix the bottom when weaving). If you immediately start weaving the walls from the cardboard bottom, you will end up with holes in the basket that will need to be decorated.

Raise the tubes up and continue working until you reach the desired height. Next, braid it up or braid it separately, gluing it to the base. The same principle is used to weave paper boxes with lids.

There is another way to weave a rectangular bottom using ribbons and newspaper tubes. This look is reminiscent of working with a rug made from paper strips. Only in this case you take not one tube, but two or three for one unit. For example, there are four groups of sticks below. Then place three sticks crosswise on them.

Place four groups of tubes on top so that their ends are between the bottom ones. Now you braid all the rows with ribbon or a soft stick. Then again lay a transverse group of sticks, braiding them with tape. Using colored tubes, you can get an original pattern.

The bottom in this case turns out to be voluminous, as if double. Then you lift all the joints and braid them with a “rope”, smoothly moving onto the walls of the product. For trays, this is the optimal paper weave. A step-by-step photo of weaving a square basket clearly shows the essence of the work. Prepare some straws and get creative.

If you have never worked with newspaper tubes, start with simple types. For example, blinds. To do this, simply twist the thick sticks along the length of one half of the window. Tie each stick with a double knot on both sides, retreating 3-4 centimeters from the edges. While working, coat the “seams” with glue.

At the top you attach a curtain ring (the blinds will be attached to them) and a loop where you can put a rolled roll if necessary. Paint the finished product and varnish it. Now you can try simple weaving on small souvenirs and move on to baskets.

Weaving from newspaper tubes is a very popular activity, and this is not surprising: something had to replace traditional weaving from wicker. Paper crafts turn out just as good, and most importantly, tube weaving is accessible to both adults and children - you just need to prepare more material. This is what we will do today: we present a master class for beginners on making newspaper tubes.

Materials and tools

Paper. Let's go to the paper vine harvesting! What is the best material to make tubes for weaving from? First of all, from old newspapers. Newsprint paper is thin, curls well, and absorbs paint well. Low density A4 paper (60-65 g/m2) is also suitable. It is called “newspaper” or “consumer”, “writing”.

In addition, you can use magazines, old notebooks, cash register tape, etc. to make straws.

How to cut paper
Paper is a fibrous material, and, like fabric, it has a longitudinal and transverse direction of fibers. Typically, small-format newspapers (57x40 cm) have fibers along the long side, and large-format newspapers (84x57 cm) have fibers along the short side. In A4 paper, the fibers often run along the long side, but sometimes you come across paper cut crosswise by manufacturers. Before cutting the entire pack into strips, check the curl of the material on one of the sheets. Place the sheet on a damp surface - it will begin to roll itself into a roll in the longitudinal direction. This is the direction you need to cut.

Glue. To work with newspaper tubes, you can choose any glue suitable for paper. For example, PVA or glue stick. It is important that it has good fixing properties, otherwise your tubes may unwind during painting.

Density also matters. If the glue is too liquid, the tubes will get wet during extension.

Wood stains water-based paints will help paint paper tubes in the colors of pine, maple, oak, rosewood and even ebony wood. You can find about two dozen shades on sale. There is a powdered stain that is diluted with water before use.

A mixture of construction primer and color also very suitable for coloring tubes. Before use, be sure to dilute the primer with water, as indicated in the instructions on the bottle. Keep in mind that paper is a highly absorbent surface.

How else to color the tubes
To give the tubes the desired color, you can use wool, fabric, printer dyes, food coloring, a hot decoction of onion peels, brilliant green and potassium permanganate.

Varnish. To make your work durable and not afraid of dampness, it needs to be varnished. Any wood varnish will do, but indoors it is best to use acrylic. It is odorless, after application it dries quickly and becomes transparent, forming a protective film.

Knitting needles and skewers. To twist paper strips into tubes, you will need knitting needles of different diameters - from 1.5 to 4.5 mm - or wooden skewers for kebab. Tubes twisted on a thin knitting needle look most like a vine. They are dense and almost do not wrinkle during weaving. And on a thick knitting needle you get tubes that are easy to flatten. And if they are twisted from very thin paper, then they can be woven like straw.

Scissors or knife. You will need one of these tools to cut newspapers into strips. But twisted tubes are best cut with pliers.

Spray needed to moisten dry tubes: sprinkle them with water and put them in a plastic bag. They will become flexible and obedient again. The spray bottle can also be used to apply paint to crafts.

Brushes used for painting finished crafts and - sometimes - tubes. You will need wide and thin brushes.

Clothespins fix the tubes, prevent the weaving from unraveling and facilitate gluing of parts.

Shilom They make holes, move the rows of weaving apart, and drag tubes between them.

Making newspaper tubes

Cut the newspaper along the long side into several pieces. The two stripes at the edges are the most valuable; they make white tubes. Center stripes will also come into play. Tubes with letters look good when woven and emphasize the unusual nature of the material.

It is best to twist the tubes on a table with a rough surface. Place a knitting needle on one side of the paper strip at an angle of approximately 30°. If there is a limiter on the knitting needle, it should be located behind the table surface.

Fold the corner of the newspaper at the same angle and press firmly.

With your right hand, turn the knitting needle, gradually twisting the tube; with your left hand, hold the newspaper.

Place a little glue on the corner of the strip, roll it up to the end and let the glue set.

Take out the knitting needle. Since we started twisting the strip from the text side, the tube turned out white.

The width of the paper strips depends on what kind of product you have in mind. If you decide to weave something large, then the width of the strip should be 8-10 cm. For a small craft, 6-7 cm is enough. The narrower the strip, the thinner the knitting needle should be. Strips 10 cm wide are best wound on a knitting needle with a diameter of 2.5 mm. For a strip 6 cm wide, a knitting needle with a diameter of 1.5 mm is suitable.

Tube extension

If you twisted the tube correctly, it will be slightly wider on one side than on the other. In this case, to build up one tube you just need to insert 1.5-2 cm into the other.

If the ends of the tubes turn out to be the same, then to extend them, fold one end into a “corner” or cut it at an acute angle.

To make the connection strong and reliable, use glue.

Coloring

It is convenient to paint newspaper tubes in a tray with a small amount of liquid or dip several pieces at a time into a wide-necked bottle. You can paint with a wide brush on a surface previously covered with oilcloth, slightly twisting the tubes. It is best to dry them on a wire rack or stacked in a woodpile.

If you want to paint the finished craft, do it first with a wide brush and then with a thin one, carefully covering the cracks. You can also give the work the desired color using a spray bottle or by immersing it in a container with a coloring agent and slowly turning it.

Next time we will weave the first figures from newspaper tubes.

Basket made of newspaper tubes. Master class with photos

Master Class. Weaving a basket from newspaper tubes

I came across such creativity online as weaving from newspaper tubes. I was interested and decided to try it. I have reviewed more than a dozen master classes. Externally, the products are in no way inferior to wicker braids. And for home use they are quite durable and for a gift - nice!
Using various varnishes, paints and coating impregnations when weaving, you can create braids of all the colors of the rainbow.
And by decorating the baskets with beads, flowers, ribbons or appliqués using the deco page technique, you can turn them into works of art.
Here's what I got.
You will need:
1. Newspaper sheets
2. PVA glue
3. Knitting needle
4. Scissors, stationery knife
5. Paint (acrylic), varnish (Finish varnish), alcohol-based stain (origon, larch, lemon...)
6. Brushes for glue and paint.
7. Basis for weaving
Photo 1

Operating procedure:

First, you need to determine the direction of the paper grain. The direction must be longitudinal. There are several ways to determine direction. Here's one: stretch the edges of a piece of paper between the nails of two fingers. In the transverse direction of the fibers, the edge will become wavy; in the longitudinal direction, folds will not form. Strips of this size will make thin tubes for an elegant product. If you need thicker tubes, then the width of the strips and the diameter of the knitting needles need to be increased.
I paint the tubes with a brush on regular oilcloth. I only use alcohol-based stains. On the recommendation of one master class, I tried to paint the tubes with a water-based stain - it ruined everything. When wet, the gluing area separates and the tubes unfold. Don't repeat the same mistakes.
Stage 1: Preparation
We mark the newspaper into strips of 7 cm.
Photo 2

On a backing board, cut the newspaper into strips with a utility knife.
Photo 3

The angle of position of the knitting needle on the newspaper strip is 10°-15°.
Photo 4

You need to start winding the strip very tightly, wrapping the edge of the newspaper around the knitting needle. The tubes turn out white if the white margin of the newspaper strip is left on the right.
Photo 5

Secure the edge of the newspaper with glue.
Photo 6

Photo 7

At this stage, the finished tubes can be painted in the desired color if desired and allowed to dry thoroughly. You can paint the finished product afterwards. And if you cover it with paint and varnish on top, then no one will guess that this basket is made from an ordinary old magazine (newspaper).
Photo 8

Stage 2: Weaving
Let's start the work by weaving the bottom. It all depends on the size of your product. To weave the basket presented to your attention, you will need 30 (thirty) tubes 50 cm long.
We take 10 tubes (hereinafter: faces) 45-50 cm long. Lay them out in pairs.
Photo 9

We fold the working tube in half and wrap it around the first pair of rays.
Photo 10

The start of work can be marked with a marker on the edge of the beam.
Photo 11

We braid each pair of rays with a rope. The working tubes intersect, then one working tube goes on top of the pair of rays, the other below. As soon as the length of the working tube ends, we extend it (insert the end of the next tube into the hole of the previous one).
Photo 12

Photo 13

We weave two rows until the pair of rays marked with a marker.
Photo 14

We weave the third and fourth row into one ray.
Photo 15

We direct the working tubes to the middle of the bottom.
Photo 16

We form the edging of the bottom. With the first ray (marked with a marker), we go around the next one, directing it to the center of the bottom and so on in a circle.
Photo 17

We insert the last ray from below into the loop of the first ray.
Photo 18

Next, we braid each ray of 4 (four) rows with a rope, slightly bending the rays from the center.
Photo 19

We decorate the 5th (fifth) row with wooden beads with a diameter of 16 cm. You will need 6 pieces. beads
Photo 20

Photo 21

6 (sixth) and 7 (seventh) rows, knit with a rope. The work is almost finished! All that remains is to cut off the excess length of the working tubes and tuck them between the rows using a knitting needle.
Photo 22

We cut off the extended ends of the working tubes with scissors.
Photo 23

To make the handle of the basket, leave 3 (three) rays on each side, separating them with clothespins. Place a drop of glue at the base of the remaining rays and cut them off with scissors.
Photo 24

Photo 25

Photo 26

We connect the ends of the basket handle tubes.
Photo 27

Before weaving the handle, drop a drop of glue onto the edge of the tube and secure it with a clothespin. We braid the handle with a tube along the entire length.
Photo 28

Photo 29

At the end of weaving the handle, drop a drop of glue onto the end of the tube and secure it with a clothespin. The main work is finished.
Photo 30

Stage 3: Coloring
For strength, saturate the basket with PVA glue and give it the desired shape. Let the glue dry completely.
Photo 31

Paint the basket with white acrylic paint. (you can add color paste, different dyes or paint with stain).
Photo 32

We cut out the motifs from a napkin and make a page deck. Cover the basket with Finish varnish and dry the finished work.
Photo 33