“Do-it-yourself magic lantern from a jar.” DIY New Year's lanterns. New Year's lanterns made of paper New lantern with your own hands from a jar

Often children under a certain age do not want the lights to be turned off when they go to bed. They are more comfortable and calm when the light is on or a small flashlight. However, this is not very good, not only because excess electricity is consumed, but also because babies produce dependence on the light on - they cannot live without it.

Fortunately, there is an interesting solution to this problem, in which the light turns off, but a small “illumination” remains.

We are talking about beautiful decorative lanterns that can be made from “scrap materials”; when the lights are off, they will sparkle like in a fairy tale.

We'll tell you two ways to do this. flashlight. Find a free moment and try it with us!

How to make a flashlight using glow sticks

Many specialized stores sell glow in the dark fluorescent sticks.

Glowing bracelets made from the same elements are also sold; they are used on various holidays.

These are sticks about 20 cm long and 0.5 cm in diameter. They have plastic connectors about 2 cm long.

They come in different colors: red, yellow, green, pink, purple, orange, blue. Sometimes several colors are combined in one stick, this makes the illumination even more original.

For making a flashlight choose your favorite colors, preferably more than two.

Materials

Glass jars and bottles (whatever you want)
Latex gloves
Scissors
Old tulle

Step 1

Find some glass jars, such as those used for olives and other foods.

Step 2

Cut a piece of old tulle, its length should be greater than the height of the jar. Place it inside the jar so that it touches the glass.

Step 3

Wear gloves to protect your hands and cut the stick to remove the glow paint.

Step 4

Shake the stick with glowing paint inside the jar until so that stains form on the tulle and glass. They will glow in the dark.

Step 5

Since the plan is to get a beautiful multi-colored flashlight, cut a stick of a different color and do the same as in the previous step.

Step 6

Close the lid of the jar well and shake it.

Step 7

Turn off the lights and enjoy the wonderful illumination.

How to make a flashlight using glowing paint

For such a flashlight you need luminous fluorescent paint, you can buy it at an artist store.

This is a paint based on phosphor - a phosphorescent pigment that can accumulate light energy with a long afterglow period.

Depending on the pigment used, it may glow greenish, blue, yellow or pink.

As in the previous case, we suggest mixing two or three colors, then the flashlight will be more beautiful.

Materials

Glass jars or bottles
Fluorescent paint
Brush
Water for paints (as needed)

Step 1

Mix fluorescent paint with a small amount of water in a clean container. so that the paint particles dissolve little by little.

For protection, use a brush and gloves.

Step 2

Wash and dry the jars well.

Step 3

Using a brush, apply paint to the inside of the can. draw a lot of dots there. The more dots there are, the better this flashlight will glow in the dark.

This process will take some time, but you will really like the result.

Step 4

Hold this flashlight next to the switched on light bulb for a few minutes, then it will glow brighter when you turn off the light.

Although the flashlight will not be very noticeable during the day, you will really like how it glows in the dark.

Interesting idea, isn't it? As you can see, making such lanterns is not difficult, and the result is impressive.

It just takes a little time and creativity . You can make lanterns together with, they will really like this activity.

In this case, everyone should wear gloves, and it is better to wear old clothes so that possible splashes of luminous paint do not cause much damage.

DIY lantern from a jar for the New Year

We will need:
- jar;
- a good wide brush;
- regular PVA glue;
- beautiful napkins;
- a candle-tablet and as decorations it can be ribbons, sparkles, acrylic paints, adhesive sparkles.

We will look at the simplest option for making a flashlight - simply using napkins and ribbons. The jar must be washed well and wiped dry. After that, we take the ones prepared with any beautiful designs. I chose a New Year's theme - deer and Santa Claus.

Carefully cut out the piece of napkin we need to the size, apply it to the jar and start applying glue on top of the napkin with a brush. The glue must be applied in a thin layer and very carefully so that the napkin does not tear.

When we have covered the entire jar in this way, we set it for 30-40 minutes so that the glue dries.

Next, we need to decorate the top. To do this, we take our prepared golden ropes, wrap the jar and, in the same way, carefully coat the ropes with glue with a brush and let them dry. When our flashlight is completely ready, we simply put a tablet candle in it and light it. When several of these lanterns illuminate a room, it turns out very festive and beautiful.

I have shown you the most accessible and simplest way to make a New Year's lantern, but you can experiment with glitter and paints, you can wrap the top of the jar with a longer ribbon and leave part of the tape unglued, then the lantern can be hung. You can make lanterns of different colors and sizes and in the evening, when it is dark outside, light them and enjoy the beauty and anticipation of the New Year.

In this master class we invite you to make an original flashlight based on the tale of Peter Pan. The result of the work will be a beautiful lamp in which the Tinker Bell fairy will sit. How exactly to make it, and what you will need for this, see the step-by-step instructions.

Materials

To make a magic lantern from a jar, prepare:

glass jar with a lid;
tracing paper;
PVA glue;
brush;
ruler;
pencil;
scissors;
colored paper;
thick black paper;
decorative key;
golden twine;
wire;
light source, preferably LED;
dry glitter;
scissors.

Step 1. Take a glass jar suitable for this project. Small barrel-shaped products look best. Wash it thoroughly and be sure to remove the label. Dry the container well and then degrease its outer surface with alcohol.

Step 2. Take tracing paper and flatten it. To implement the idea, you need tracing paper. This is thin translucent paper, through which the shadow of a fairy fairy will be visible.

Step 3. Mix the glue with a few drops of water and apply it to the surface of the jar with a brush. Wrap the jar in tracing paper. Press it down carefully. Leave the remaining paper creases. They will look impressive.

Leave the workpiece until completely dry. 4 - 5 hours will be enough.

Step 4. Transfer the outline image of the fairy onto a sheet of thick black paper. Cut it out and glue it to the inside of the can. Leave the product to dry.

Step 5. Decorate the jar at the neck to make it look more impressive. In this case, golden-colored rope, golden-colored wire, and a small decorative key were used.

Step 6. Take colored plain or corrugated paper. Cut a strip 30 cm long and 6 cm wide from it. Draw the outlines of the petals on it with a pencil and also cut them out. Roll up the strip, simultaneously lubricating the paper base of the flower with PVA glue. At the end of the process, use scissors to bend the petals in the desired direction.

Step 7. Glue the finished flower to the neck of the jar.

Step 8. Decorate the jar with dry glitter. Lubricate it at the top with PVA glue and then sprinkle with glitter. Don't pour it in too much.

Step 9. Place a small battery-powered LED light source inside the jar. This could be a small spotlight, a miniature tablet flashlight, etc.

Girls, look what beauty you can make from a mason jar!

I came up with such an interesting little thing from a simple coffee jar. It is quite universal. Do you want it to be a stained glass lantern... Or do you want it to be a vase!

I'll tell you how to make such a flashlight.

So, we will need:

coffee jar
masking tape
black acrylic paint (car paint in a can)
stained glass paints (water-based “Gamma” is suitable for beginners)
contours on glass (black and gold)
paper template for drawing
wire
tin can lid
scissors

The jar was washed from the labels and degreased.

On those areas that we are not going to paint over, we stick a self-adhesive film (I use it oracal). You can use masking tape.

We cover our jar with black spray paint. Let it dry for about 30-40 minutes.

Has it dried out? Carefully peel off the film. We don't need her now. Our jar is shaped like an antique lantern. This is the image we will start from.

Using a black outline with dots, we mask the uneven torn edges.

Since this will be a lantern, let’s draw a light for it on paper.

We insert our sketch inside and secure it with tape. Draw a flame using a golden outline. And so - from all four sides.

This is what happened. Let the outline dry. One hour is enough.

We paint our light with stained glass paints. From all sides. But! Each side must be completely dry! At least a couple of hours in the horizontal plane. Only then start painting the next one.

Result (all 4 faces are colored):

I made the handle for the flashlight from copper wire. I just intertwined two wires with each other.

Our "handle". Maybe someone will come up with a more interesting design. This is what I got).

Around the neck of the jar we make the same intertwined rim, fasten our handle and paint it with the same black spray paint. In this case, you definitely need to cover the jar itself with something so that the paint only gets on the neck and the handle itself.

And here it is - our flashlight!

Fire of my soul))

To install the candle, I suggest the following design. It will be clearly fixed in the jar and it will be convenient to light a candle in it.
So, take a tin lid from a tin can and make several cuts.

We bend the edges.

We insert the candle - it works!)

We punch holes in two places and stretch copper wire through them. We bend the edges so as not to scratch the edges of our flashlight.

Another perspective to make it clearer:

Now comes the fun part! Light a candle and insert it inside the flashlight. The fastening antennae are just fixed on the neck of the jar (by the way, I also painted them with black paint).