Detailed description of knitting a cap for a newborn. Knitted cap for a newborn: giving the baby our warmth. Patterns for knitting booties for newborns with step-by-step descriptions and photos

I don't like knitting patterns, which are directly related to knitting density. I prefer to knit patterns than according to the diagrams.

That's why I decided to look for baby cap pattern and soon I succeeded.

I present to your attention the diagram I constructed.

In the book in which I found this cap pattern, other, more complex ones, consisting of several parts, were also proposed, but for knitting I chose this very simple pattern, because the knitted fabric stretches relatively easily and takes the desired shape.

The upper part (33 cm) is divided into three equal parts (11 cm each), segments of the same length are laid at the very bottom of the diagram (11 cm each).

Knit I started crochet single crochet from top to bottom.

I used a special one for knitting a cap. baby cotton .

It was very easy for me to knit, since the height of one row with my knitting density was exactly 0.5 cm.

Probably the most difficult thing is to make a decrease in order to knit a small rounding 2 cm high (see in the diagram), this is easier to do if you build a pattern, for example, on a newspaper and simply apply knitting to it, determining whether it is time to finish the row and move on to the next one.

The bend at the very bottom of the part (0.5 cm) causes somewhat less problems.

Narrow part cap(the back one) I had to make striped because the salad skein of cotton was not enough for a whole cap.

This is precisely why the lowest stripe of yellow thread is the widest.

After cap detail tied in the shape of a strange letter T, all that remains is to assemble the cap by making two seams.

Make the seams outward, you don’t want them to put pressure on the delicate baby’s head from inside the cap.

I connected the cap using a crochet hook and yellow thread.

Then, using the same crochet hook, I tied the cap at the front, slightly tightening the knitting (to give the cap a more beautiful shape).

I tied the cap and along the bottom, from the same yellow threads I made and strings(I find them more practical than a button or other fastening options).

Of course, before using it for its intended purpose, the cap must be washed using detergents for children (for example, soap) and ironed.

Decorate the cap can be done in a variety of ways: lace, ribbons, ruffles, embroidery or appliqué.

However, you should not be zealous in this direction, because for happy parents there is nothing more beautiful than the face of their newborn or newborn! :)

Knitted caps. Two-color.

If you have knitted socks, then you know how the heel is knitted.

Cast on 56 loops (this is for 2 or 3 months) knit 4 r. with a 1x1 rib and then evenly add another 10 stitches, knitting with a pattern in this case is:

1p: k1, p1, and so on until the end of the row.

2p: according to the drawing how the loops lie.

3 rubles Knit purl stitches over the knit stitches, and knit stitches over the purl stitches.

4p: knit according to the pattern.

Knit these 4 rows.

Knit like this for 10 - 12 cm, then divide all the loops into 3 parts and knit like a heel.

Having reached the bottom, we collect loops for the elastic from below along the edge and knit 2 cm with a 1x1 elastic band, leaving 3-5 loops for ropes along the edges.

When the hat is ready along the edges, heels, we cast on loops for the ruffles and intensively add loops (from 1 we make 3), 1 l., from 1-3, etc.

We make an increase only in the 1st row and then knit 4-5 cm in stocking stitch.

We make the second ruffle in exactly the same way, but 3-4 cm.

We tie the edges with cloves (hook).

If you think that the ruffles will hang too loosely, go along the edge, heel, with a needle and thread and pull it a little.
You can try on the hat if you have kids, I knitted 10 stitches more, because I knitted this costume for 6-9 months and it depends on the yarn. My thread was of medium thickness.

I embroidered the flowers with a knitting needle. Yes, if you need a larger size, cast on 65 stitches and then in the last row add 10 = 75. Of course, depending on what the pattern will be. And we knit 13 - 14 cm like this, and the rest as indicated above. If you have any questions, please contact me, I will always help!!!

The pattern I used to knit the hat.

Rapport is equal to 4 loops.

1st row: purl loops (color A);
2nd row: purl loops (color A);
3rd row: knit 3, remove 1 stitch without knitting - thread after knitting (color B);
4th row: remove 1 loop without knitting - thread before knitting, purl 3 (color B);
5th row: knit 1, slip 1 stitch - thread behind knit, knit 2 (color A);
6th row: knit 2, slip 1 stitch - thread before knitting, knit 1 (color A);
7th row: knit 3, slip 1 stitch - thread by knitting (color A);
8th row: remove 1 loop - thread before knitting, 3 knit (color A);
9th row: 1 knit, 1 slip - thread behind knitting, 2 knit (color B);
10th row: purl 2, remove 1 loop - thread before knitting, purl 1 (color B);
11th row: knit 3, slip 1 stitch - thread behind knitting (color A);
12th row: remove 1 loop - thread before knitting, 3 knit (color A);
12th row: knit 1, slip 1 stitch - thread behind knit, knit 2 (color A);
14th row: knit 2, slip 1 stitch - thread before knitting, knit 1 (color A).
Repeat from the 3rd row.

Hat: Cast on 65 loops and knit with an elastic band 1x1 (1 knit, 1 purl), 3 cm. In the last row, add 10 loops and knit with a pattern of 13-14 cm (depending on the child’s head), I have 13 cm on this hat. 13 cm, we knit the cloves, for this we knit in stockinette stitch (knit on the face, and purl on the wrong side), 6 rows, and make holes in the 7th row (if the cloves need to be more visible, then we knit 1 edge stitch, 2 yarn overs, 2 loops together, knit and etc.). We simply knit the 8th row purlwise. Then we knit 4 more rows and then we got 5 rows with the reverse 8th row. With an additional knitting needle, cast on from the wrong side in the initial row of knitting the cloves, the same number of loops as on the main knitting needle. And now we knit the 6th purl row with purl loops, 2 loops together (one loop from the main knitting needle, and the other loop from the second knitting needle that raised the loops) and so on until the end until there are 75 loops again. And now we knit like a heel to a toe. When the hat is ready, cast on 65-62 loops along the bottom edge of the hat and knit with a 1 x 1.3 cm elastic band. In the last row, leave 4 loops at the edges for ties and bind off the remaining loops. Knit the ties in a 1x1 pattern, changing stitches every 2nd row. Purl over the knits, knit over the purls. Up to the length you need the strings. The hat is ready. Of course, you first need to remove all the extra threads from the wrong side.

To make the teeth white, we knit the 7th and 8th rows with white thread.

Pattern for a blue and hot pink hat.

The number of loops is a multiple of 2 + 1 + 2 edge loops.

1st row: (blue thread) knit stitches.
2nd row: (blue thread) knit stitches.
3rd row: (white thread) knit 1, remove 1 (thread at work), knit 1, remove 1 (thread at work), etc. at the end of the row, knit 1, edge 1.
4th row: (white thread) knit 1, remove 1 (thread before work), etc. at the end of the row 1 front and 1 edge.
5th row: (blue thread) all knit stitches.
6th row: (blue thread) all knit stitches.
7th row: (white thread), remove 1 (thread at work), 1 knit, etc. at the end of the row, remove 1 (thread at work) and 1 edge.
8th row: (white thread), remove 1 (thread before work), knit 1, etc. at the end of the row, remove 1 (thread before work) and 1 chrome.
9th row: (blue thread) all knit stitches.
10th row: (blue thread) all knit stitches.

Repeat from the 3rd to the 10th row.

Pattern for a yellow and pink hat.

To knit a sample of this pattern, cast on 20 loops from a light thread on the knitting needles and then knit like this:

Row 1 = (light thread) knit 1, slip 1 stitch (thread behind the knitting needle and stretches along the wrong side), etc.
Row 2 = (light thread) knit all stitches.
Row 3 = (dark thread) slip 1 stitch (the thread is behind the knitting needle and stretches along the wrong side), knit 1, etc.
Row 4 = (dark thread) knit all stitches.

Starting from the 5th row, repeat the pattern.

hat with ears and flower

Using 3.5 mm needles, cast on 34 (40) sts.
Work 8(10) rows with rib knit 1/p 1.
Switch to 4.5 mm knitting needles.
Knit 1 row of faces. p.
Row. 1 (from the front side): remove the first stitch, faces. up to 5 sts from the end of the row of the row, wrap the thread around the trace. p., turn the work.
Row. 2: purl. up to 5 sts from the end of the row, wrap the thread around the trace. p., turn the work.
Row. 3: persons. up to 10 sts from the end of the row, wrap the thread around the trace. p., turn the work.
Row. 4: purl. up to 10 sts from the end of the row, wrap the thread around the trace. p., turn the work.
Row. 5: persons. up to 15 sts from the end of the row, wrap the thread around the trace. p., turn the work.
Row. 6: purl. up to 15 sts from the end of the row, wrap the thread around the trace. p., turn the work.
Row. 7: persons. up to 10 sts from the end of the row, wrap the thread around the trace. p., turn the work.
Row. 8: purl. up to 10 sts from the end of the row, wrap the thread around the trace. p., turn the work.
Row. 9: persons. up to 5 sts from the end of the row, wrap the thread around the trace. p., turn the work.
Row. 10: purl. up to 5 sts from the end of the row, wrap the thread around the trace. p., turn the work.
Row. 11: persons. to the end of the row
Row. 12: slip the first stitch, then knit. to the end of the row (you will get a scar on the front side)

Repeat these rows. 5 times (6 parts)

Then switch to thinner needles and knit 1 k/1 rib. 34 (40) sts from a straight needle, knit 8 (10) rows with an elastic band and loosely bind off the loops according to the elastic pattern.

The front and back of the hat are knitted with an elastic band, and there are “ears” on the sides. Using thinner knitting needles, cast on 20 (22) stitches along the closed edge of one part of the hat along the closed edge of the “ear” to the other part of the hat, knitted with an elastic band. Attach a marker between the 10th (11th) and 11th (12th) loops.
Knit 1 row of faces.
This part of the hat is knitted in garter stitch (all r. knit stitches)
Connect persons. up to 2 sts in front of the marker, decrease the loop with a slant to the left (slip one knit stitch on the right knitting needle, slip another one as a knit stitch on the right knitting needle, thread the left knitting needle into the two slipped loops from left to right behind the front walls of these two loops and knit both loops together knit behind the back wall), retake the marker, 2 sts together knit., knit. to the end of the row.
Track. row: all sts.
Repeat these 2 rows until 6 (8) stitches remain on the needle.
Knit 50 (58) rows without decreasing.
Buttonhole: k3 (4), bind off 2 sts, knit. to the end of the row.
Next row of knitting faces. to closed sts, dial 2 sts, knit. to the end of the row
Cast off 1 st at beginning of next. 2 rows.
Close the remaining steps..
Knit the second “eye” like the first and close the loops when there is some left on the needles.
6 (8) p. Thread the ends of the thread, sew on a button.

Even before the baby arrives, many mothers begin to think about a dowry and try their hand at knitting. Of course, booties, socks, envelopes and other things can be purchased in the store, but every woman wants unique things for her child - hand-knitted by mother, during the manufacturing process each loop was made with love and special warmth.

Rules for choosing yarn and materials for decoration

The skin of a small child is different from that of an adult - it is very delicate, easily damaged and irritated. Among other things, the baby’s natural defenses are not so well developed, which means that the dyes used in the manufacture of yarn can cause an allergic reaction in the child.

That is why manufacturers offer a special line of children's yarn that is not so dangerous for the baby.

When choosing the main material for knitting, you should pay attention to hypoallergenicity, naturalness and softness.

Dyes, as already mentioned, are allergens, which is why very saturated colors should be avoided; moreover, such yarn will fade. It is better to choose a product from a proven brand - “Alize”, “Pekhorka”, etc.

As a rule, these manufacturers add acrylic or microfiber to wool to achieve softness - everyone knows that natural fiber is unpleasantly itchy. The composition of the yarn may vary, if domestic manufacturers more often offer half-wool (merino six in the composition reaches 50%), then a thread from an Italian company may contain only 20% synthetic fiber (for example, the Lana Baby Merinos brand).

If you have any doubts about whether your child will enjoy wearing a product made from the material you are planning to buy, you can do a simple test: just run a skein over your lips and think about your feelings.

Synthetic and cotton threads are also popular. The first ones, produced using the latest technology, do not “creak” and, despite the lower price, look good. In addition, this material retains heat well and also absorbs sweat and products from the sebaceous glands.

Choose buttons and other decorations that are large and bright so that the child cannot swallow them if they come off. Recently, “stickers” have become popular - stickers on clothes, as well as adhesive embroidery, but such decorations do not adhere to wool in the best way.

How to knit an envelope for newborns

Size: 0-6 months.

You will need:

250 g of gray yarn;
250 g dark gray;
knitting needles No. 6;
large needle;
buttons.

Instructions with photos:

Knitting hats for newborns: patterns with step-by-step descriptions and photos

Hat with patterns

Size: 3-6 months (40-44 cm).

You will need:

half-wool yarn - about 100 g (200-250 m);
boucle yarn – 50 g;
stocking needles No. 3;
knitting needles No. 6;
hook for tucking in residual ponytails;
lace.

Knitting description:

Fur ear flaps:

Cast on 4 loops. Knit with knit stitches crosswise (one on one).
In the 3rd and 5th rows, add two loops on each side.
Perform rows 6,7,8 without changes.
In the 9th, decrease 4 loops - 2 on both sides.
Make 2 more rows, close the “eye”.
Tie the resulting circles to the workpiece as shown in the very first picture. The hat is ready.

Cap for newborns

Size: for children up to 3 months.

You will need:

50 g of wool or wool mixture;
knitting needles No. 3, circular

Knitting description:

Cast on 60 loops.
Knit with an elastic band (one by one) 2-3 cm, that is, 8-10 rows.
Work in stockinette stitch for 30-32 rows, approximately 12 cm from the elastic.
Divide the knitting into three equal parts, 20 loops each for the sides and back of the head.
After dividing, knit the front row to the black paperclip, ignoring the red one, after the paperclip, knit two loops into one.
Knit the next purl row to the red paper clip, repeat the technique of two loops in one after the paper clip. Take out the markers.
Thus, gaps have formed in the canvas, which are necessary in order to navigate when decreasing the loops.
Continue knitting, gradually decreasing the sides. There are always 20 loops left in the middle part. After 12 loops remain on the sides, also begin to reduce 6 loops evenly in the back of the head.
There should not be a single loop left on the sides, and 8 pcs in the middle. The cap is formed.
Using a working thread, we make purl loops from the edge loops of the sidewalls.
Next, we make a pattern with an elastic band, knitting the edge loops of the second sidewall.
Knit with an elastic band of 2.5 cm.
Leave three loops for knitting ties. Ropes can be made using stockinette stitch, garter stitch, or tube stitch.
Hide the threads, steam the cap and pull it onto a roller or jar.

Patterns for knitting booties for newborns with step-by-step descriptions and photos

Booties from Bekah.knits

Size: 0-6 months.

You will need:

wood-colored yarn, half-wool, wool - 3 skeins of 50 g each in different colors, white, blue, gray;
knitting needles - No. 2.5.

Knitting description:

Work the soles in garter stitch (two stitches back and forth = one stitch), odd rows - knit. To do this, you need to cast on 6 loops, then in every second row add one yarn over after and before the edge stitches, so you knit 14. On the 31st row, make one decrease on each side. Then continue knitting until the 44th row, from the 45th start decreasing, knitting two into one on each side and so on until there are 6 open loops left. Knit the second sole.
For the toe and heel we cast on three loops, on the sides - 25 (12 and 13). Knit a row in satin stitch.
Next, fill 3.5 cm with an English elastic band.
Redistribute the knitting: leave one stitch on the toe, 12 to the left and right of it on the sides, distribute the rest onto two knitting needles.
Perform 4 rows in a circle, starting the pattern on the fifth.
Proceed to the toe of the bootie. Follow the pattern according to the diagram, in the end there will only be 5 loops left.
Knit in satin stitch. Knit 10 scars of shawl fabric - you get a strap.
Sew on the strap to make a loop.
Proceed to the back of the booties, tie another thread, knit two hems, add 15 loops.
Knit 2 ribs in garter stitch, make a loop for a button at the end of the strap - yarn over three loops before the edge and knit two into one. Make a strap according to the width of the loop.
Thread on a strap, sew on a button and add embellishments.

Multi-colored booties

Size: 0-6 months.

You will need:

yarn dyed in different colors, Trinity or Alize;
knitting needles No. 3.

Let's consider the knitting process.

The main pattern is shawl. Cast on 8 loops.
Start with face knitting
Make increases. To do this, in the third row, pick up the edge stitch on the knitting needle.
We make an additional loop: we insert the knitting needle into the base.
Pull the thread through to create an additional loop.
Continue according to the drawing.
Knit, leaving two loops. Make increments according to the pattern in columns 3 and 5 to make 12.
Just like at the beginning, add a loop at the end of the row.
We knit 32 rows according to the pattern, proceed to decreases: in the 33rd and 35th, make two loops into one.
There should be 8 loops on the knitting needle.
Close the sole. Remove the edge.

Insert the left edge needle into the edge.
We stretch one loop into another.

Tighten the knots without cutting the threads.

Main part:

Let's knit another column, leaving the last 7 stitches untouched.
We knit 6 loops, transfer the 7th to an additional knitting needle.
It turns out 6 on the right needle, 19 on the left.
Knit two loops on the left side and leave one on the right so that you get 7 loops again.

Knit also: remove the edge, 5 knits according to the pattern, 7 - remove to the additional one, and then to the adjacent one.
Repeat the same technique - knit the first two loops in one purl.
Turn the knitting again, continue knitting, also transferring the last loop, and then knit the first two so that there are always 7 loops left in the middle.
Knit the sock so that there are 7 loops left on each side.
Work 14 columns of garter stitch without joining at the indicated location.
Cast off the 14th row, do not cut the thread.
Make a fastener by making 10 loops in the edges. The first and second rows of fasteners should be knitted together, the third row should be knitted, yarn over, two together, knitted, yarn over, two rows together, edged, the fourth and fifth rows will be like the first and second, the seventh row will be closed.
Break the thread and tie the ends, sew on buttons and decorations. Knit the second bootie in the same way, but make the clasp on the other side.

How to knit a beautiful baby jumpsuit

Size: for newborns up to 6 months.

You will need:

yarn with a wool content of less than 30%, children's acrylic, cotton, viscose - 250 g;
knitting needles - circular No. 3, hosiery knitting needles No. 3, for cuffs - No. 2;
hook for tying No. 2;
thin lightning.

Knitting pattern with step-by-step description and photo:

The number of loops is calculated from the knitting density (1 * 1 cm) and neck circumference, that is, by multiplying the number of loops in one square cm by the length of the neck measurement + 2 cm.
For wool, it will be enough to cast on 68 stitches using a cross cast-on.
Let's move on to the main canvas. Knit the first row in purl stitch, then distribute the stitches on the raglan according to the pattern: 11 stitches for the fronts, 9 for the raglan sleeves, 20 for the back and 8 for the raglans themselves.
Raglan stripes are knitted purlwise, while the first row - loops are made according to the pattern, but from the wrong side (11 purl, 2 knit, etc. according to the pattern). In the first front row you need to knit short along the sleeves and back.
Make additions before and after raglans in every second row. Increases are made by knitting 3 stitches from one (knit, yarn over, knit).
Thus, 8 loops are added to each front row.
The total length of the raglan is about 13-15 cm, depending on the build and height of the child. The figure shows that 6 increases were made.
There were 23 loops on the fronts, 33 on the sleeves, 44 on the back, and 8 raglan lines. After finishing the canvas, you need to shift
Next, “undercuts” are made, that is, air loops are reached between the shelf and the back. That is, after knitting the raglan lines, add 4 chain lines, skip the sleeves, moving to the second raglan line and knit the back, another raglan line, add 4 chain lines. There should be 106 stitches on circular loops. You can knit without picking up the loops, then the last raglan loops go to the adjacent part.
Knitting continues in satin stitch without adding anything.
Continue stitching to the beginning of the legs, taking the child’s measurements (measurement + 3 cm). For a product with a height of 68-74 cm: the length of the overalls for this height is about 56 cm; the length of the inner surface of the trouser leg is about 20-22 cm, so the height of the overalls to the cut of the pants is 35 cm; it is necessary to make minimal recesses for the zipper (1 cm each).
We knit 33 cm in a straight line.
Add air loops to the sides of the front row.
Four more rows in stockinette stitch, attach a paperclip or marker to the middle.
Let's move on to the gusset. To do this, start the first row from the mark with one decrease at the beginning and end of the leg, knit the front row, then the purl row. In the third row, make two increases of 2 stitches after the edge and before the marker, the fourth - according to the drawing. In the fifth there are four times 2.
Knit the 6th according to the pattern. It will look like this:
On the seventh - bind off 4 loops. The resulting triangle forms a gusset.
Divide the product into two parts according to the attached marker, then turn the knitting and start knitting the legs separately, taking the two outer loops crosswise to prevent the work from being pulled out.
On the eighth row, bind off four loops again, on the ninth, knit the first two into one, also on the tenth.
The trouser legs can be made on five knitting needles or circular so that there is no seam, they can be knitted with a slit and then sewn. You can make narrow and straight wide pants. For an even bevel, decrease in even rows. For straight lines, perform decreases directly in front of the cuff.
An approximate version of knitting a trouser leg: 30 rows of satin stitch, decrease four stitches (two from the edges), switch to stocking needles, then make another decrease, distribute 11 stitches on four knitting needles, make 11 more circular ones, then with an elastic band.
Knit another trouser leg, extend the seam to the recess for the zipper.
Sew the connection area.
View between the legs.
legs:
Type of gusset.
Proceed to knitting the hood. To do this, reduce the initial number of loops - 68 - to 61, make a 1 * 1 elastic band, in the second and third rows of which you can make holes using yarn overs and two-in-one knitting. In the fourth and fifth stitches, bind off the first 5 stitches, and do the rest in satin stitch, as in the photo.
Make two rows of satin stitch, in the third and fourth knit shortened 9 loops on the sides: edge, 8 knit, remove 1 loop without knitting, yarn over, the rest - purl. In the next row: knit the edge, knit and auxiliary yarn overs together with a loop, do the same on the wrong side. Perform 6 more lifts of the satin stitch, repeating the shortened knitting.
The surface should be 17 cm.
Divide the knitting into sides and back. Reduce the sides and make the hood according to the heel-to-toe principle. The height of the hood should be 22 cm.
Tie the hood, cast on 94 loops along the edges.
Work an elastic band 5 cm thick 1*1, finish by closing the knitting.
Fold the binding in half inward.
Sew the folded strip to the edge of the edge loops of the base.
Connect to the recess.
The result is a drawstring through which you can later pass the lace.

Proceed to the sleeves. Take 6 stitches to the undercut.
To make the sleeve look better, you should decrease two stitches at the very beginning.
Before knitting the cuff, reduce 3 loops, make the cuffs with an elastic band 1*1, 12 circles. The last three are done in full double knitting and closed by machine.
The workpiece is finished.

Take a hook and tie a connecting post, two air ones, repeat along the entire zipper slot.
Knit three more air ones and a small square, which is sewn over the ends of the zipper so that it does not irritate the skin of the child’s neck.
For ties, you can choose a lace in the color of the yarn. You can also crochet 50-75 cm, which is tucked into the drawstring.
Subject the overalls to heat treatment.
Finished the strapping. There are ties left - crochet 60-70 cm long, put through the drawstring.

Using the presented patterns, you can easily knit things for your baby, proceeding step by step. Using multi-colored yarn and decorations, you can create a truly unique item.

And another small master class on knitting a hat for a baby is in the next video.

A cap for a newborn is the first headdress. It differs from a regular hat by the presence of two ties. They tie under the chin and prevent the hat from moving off the head, plus they allow the ears to be covered more tightly. Even a novice knitter can knit a wonderful cap for a newborn using knitting needles with the descriptions and patterns offered in this article.

Knitted cap with lapel

The model is calculated for a child aged 1/3 (6/9) 12/18 months.

Head circumference: 42 (44) 46 cm.

We will need:

section-dyed yarn with a wool content of at least 75% (50g per 205m) – 50g;
set of double needles No. 2.5;
markers (M).

elastic band 2l.x2i.;
stocking stitch: in knit stitches – facial, in purl. r. - purl stitches;
garter stitch: when knitting forward/reverse, all stitches in all rows are knitted.

Density: on stockinette stitch 26p. for 34r. equal to 10 cm by 10 cm.

How to knit a cap for a newborn with knitting needles

We dial 104 (112) 120p. and knit an elastic band at 6 (8) 8 cm. Let's move on to the stocking section. and in the first row we evenly decrease 14 (16) 18 sts. 90 (96)102p remains.

After 14 (16) 17 cm from the first row. at the beginning of the next two days. initial 6p. close and put 6 M: 1st after the 1st p., the remaining five after 13 (14) 15 p. After the 6th M there should be 12 (13) 14 p. We continue knitting with a scarf pattern on all stitches and the next. r. we make decreases by 1 point. in even p. after each M. We continue like this until on sp. there won't be 12p left. Next r. We knit all the loops in 2 stitches. in 1l. We break the thread, thread it through the remaining stitches, tighten it, and fasten it. We sew the back seam and stitch together the previously closed 6 stitches. on each side.

We raise 60-80p along the bottom. and, knitting 2 cm of the stocking, close. loops.

For the ties, cut two strands of yarn approximately 2m long. We twist them into a spiral and sew on the ties.

Knitted cap for a newborn “Green Dwarf”: video master class

Elegant blue cap for a newborn boy

For 3-4 months of age.

We will need:

yarn, 100% cotton (50g per 212m) – 50g;
sp. No2.5;
white satin ribbon 0.5cm wide – 1m;
white satin ribbon 4cm wide – 0.35m.

persons gl.: in persons. r. – knits., purl. – purl;
“Fantasy” pattern: see diagram. Inside out r. Knit all the loops and yarn overs on the wrong side. p. We start with loops before rapport, then repeat repeats, and finish sts after it. The pattern needs to be knitted 1 time with 1 p. 18 rub.

Density: face. Ch. 38p. for 69 rub. equal to 10 cm by 10 cm.

Description

We dial 9 rubles. and in further work we will alternate strips of 3 purls. r. (they must be first) with stripes of 3 persons. r. At the same time we make increases (see diagram):

1p.: *1l., 1n.* - from * to * repeat on all sts. Finish with 1l. Total – 17p.

We repeat such increases 11 more times in each even row. Total – 105p. Alternating stripes, we must move on to decreases and close off 14 stitches on both sides. Total – 77p. At 4cm from the increase we move to the “Fantasy” drawing. Having knitted it, using the description, we proceed to knitting 1p. inside out n. We need it for bending.

We finish with 4 cm faces. Ch. Close p.

Assembly master class for beginners

We turn the front strip inward along the fold row and sew it on. Stretch a wide ribbon and cut it to the desired length. Sew the side edges together in the increase area. Raise 60p along the bottom. and knit 4p. persons Ch. Closed p. Turn the bottom edge inward along the river. with holes and sew.

We stretch a narrow ribbon.

Openwork cap for newborns: video MK for beginners

Knitted cap for a newborn boy with description

Sizes for boy 3 (6/12) months.

We will need:

yarn of any composition (choose depending on what season you will knit a hat for) – 50g;
circle. sp. No2.5;
circle. sp. No3;
set of hosiery sp. No3;
markers(M).

What patterns will we use to knit a cap?

garter stitch: when working, alternate faces in the round. and sign rows;
persons Ch.: when working in a circle, all stitches are knitted.

Density: per l. Ch. knitting needles No. 3 28p. for 36 rub. equal to 10 cm by 10 cm.

How to knit a cap for a newborn boy, master class with description

Sp. No2.5 dial 115 (121) p. and switch to circular knitting, setting M at the beginning of p. Knit 8p. handkerchief viscous. We change sp. to No3 and continue:

1p.: 1l., 1p. from a broach, 17 (18) l., double broach (1 p. remove faces, 2 p. in 1 l. and stretch through the removed one), * 17 (18) l., 1 p. from broach, 1l., 1p. from broach, 17 (18) l., double broach* – from * to * repeat twice, 17 (18) l., 1 p. from broach, 1l.

Explanation: 1st double. extended forms the shape of the 1st ear, the 2nd – the center, the 3rd – the 2nd ear.

2p.: knits.

Repeat 1 time. and 2p. another 7 (8) times and proceed to decreases. The scheme is like this:

1st row: 18 (19) l., double. extended *35 (37) l., double. extended* – from * to * twice, 18 (19) l. Total 109 (115) points;

2 rub. and all even: persons.;

3 r.: 17 (18) l., double. extended *33 (35) l., double. extended* – from * to * twice, 17 (18) l. Total 103 (109) p.

We continue to make decreases in 6p increments. in every even r. (see previous diagram) for now on sp. there will be no 7 (13) p. During the work, for convenience, we switch to stocking joints. We break the thread, pull it through the stitch, tighten it and fasten it from the inside out.

Ties

By faces. on the side with stocking needles we cast on 5 stitches. (see photo) and knit a scarf. pattern 18 (20.5) cm. Close p.

Cap with knitting needles “Baby”: video instructions

Openwork cap for a newborn

Head circumference 40cm.

We will need:

yarn with a wool content of at least 46% (25g per 87.5m) – 50g;
sp. No3;
hook No.3.

handkerchief pattern: when knitting in the round, all sts in all r. – facial; for forward/reverse knitting in faces. r. – facial, in purl. - purl;
openwork: number of stitches is a multiple of 6.

From 1st to 3rd: persons;

4p.:** 4l., 1 lump (2p., * turn, remove 1p., 1p., turn, remove 1p., 1p.* – from * to * repeat 3 times** – from ** to ** repeat until the end of the row. Every 4 p. we shift the pattern 3 p.

Description

Dial 10p. for the first earphone and knit boards. viscous. In even numbers add 3p on both sides. 1 p.

We received 16p. In 16 rubles. (3cm) set aside the loops. We call out another earphone. We transplant to sp. 16p. first earphone, dial 21p. for the back of the cap for a newborn, replant 16p. second earphone, received 53p. Knit 30r. handkerchief knot In the next r. we dial for the front part 55p. Total 108p. We switch to knitting in the round. After 12 p.m. (2cm) go to openwork. Knit 41 r. (13.5 cm).

Let's start making cuts. For them we knit 2 stitches. cones in 1 p. We have 90p. We repeat the decreases three times in every 4th row. We have 36p. After 2 more rows we knit 2p. in 1l. 18p left. We break the thread, tighten the stitch, and fasten it.

Assembling a hat for a newborn

We tie the bottom 1p. single crochet and crab step. We twist 2 cords 40cm long and sew them to the headphones. If you wish, you can make a pompom and sew it on. Pompom diameter – 5cm.

Cap for a newborn: video MK for beginners

Selection of schemes

The birth of a child is always a joyful event. What is the best gift you can give to a baby in his first days? By knitting a cute bonnet, of course! Undoubtedly, stores sell caps of different colors and sizes, but it is much more pleasant to make it yourself and admire your work every time. In addition, you yourself can choose the material from which you will knit this little thing, and you definitely won’t doubt its quality. Even if you have never knitted or are just trying your hand at this, knitting a cap will not be a difficult process for you. Let's find out how to knit a cap, especially for a newborn baby.

First you need to decide on the size and style of the future cap. If with the first everything is more or less clear and for convenience the size table is located below, then with the choice of style everything is much more complicated.

There are many ways of knitting and what your product will be like depends only on the degree of your skill. It can be a “Riga elastic band”, or a “spider” pattern, or even a cap with double-sided knitting.

A variety of patterns for knitted caps for newborns

Let's look at how to make basic caps knitted with comfortable knitting needles, and diagrams and descriptions will help you in your work.

Knitting with the "Spider" pattern

Usually the “spider” is used to decorate the edge of the product or to give the front surface a little variety.

To obtain such a pattern, you need to remember rule 8;1; edge. That is, odd rows are knitted according to the pattern: purl stitches, knit stitches, purl stitches. And the even rows are just like the picture. In this case, you need to start with seven loops and decrease them with each odd row, but, on the contrary, add knit loops, and add one purl loop at the end of each row. After the eighth row, the 9th is knitted as the 5th, the 11th - 5 purls, 2 knits, 1 purl and at the end a purl - edge. 13th – purl 3, knit 1, purl 1, knit 1, purl 2, repeat until the end of the row and make an edge. The 15th and 17th rows are knitted with decreasing purls and increasing knits, starting with 2 loops, then 4 purls, and at the end of the row a purl loop. The 19th row begins with a purl, then three loops are crossed to the right and 4 more purl loops are knitted. The 21st row repeats the 17th. 23rd - alternate knit and purl 1-2-5, the edge is closed with the last purl, and 25-1 row is knitted with alternating purl and knit according to the pattern 1-1-5-1. The last one will be the 26th row. Next, repeat the pattern, starting from the third row. Do not forget to close each row with a purl loop.

The result should be a pattern like this:

"Riga gum"

This is a fairly simple pattern, so even beginner knitters will not have any questions about its execution.

As you can see in the diagram, the pattern is knitted with knit and purl stitches alternately. Let's take a better look at the principle of knitting.

We cast on 27 loops on the knitting needles. The first row begins with an edge loop, then there are 2 knit stitches and 2 purl stitches. The row ends with a front loop, and then an edge loop. But in the second row the purl and knit stitches change places. Then everything remains unchanged.

The number of loops may be different, the main thing to remember is that it should be divisible by 4. And add 1 more loop so that the pattern does not “go away”.

Double-sided knitting

This type of knitting is suitable for a cap that will be used in the winter season. This knitting is thicker than usual, since it consists of 2 threads and, therefore, the product itself is warmer.

To begin, we cast on loops from two threads. It is best to take yarn of two colors. Here, not only the last loop is edge, but also the first; they are knitted with both threads. At the same time, in odd rows the edge loop is the front loop, and in odd rows it is the purl loop. After the edge, alternate the knit stitch with the purl stitch. The drawing is ready!

Thus, at least one presented diagram of a comfortable cap for a newborn baby with knitting needles may be useful for realizing your ideas, especially since it will include a description of knitting.

And if you have never knitted before and such patterns seem like something unattainable, then let’s take a look at a small master class.

Master class for beginners on knitting

Any work begins with the preparation of the material. We will need: yarn - 30 g or about 70 m. It is best if it is wool. And take the knitting needles with which you will knit. The most suitable would be No. 3.

Cast on 60 stitches on the knitting needles and start knitting with a regular elastic band. To do this, you need to knit the first row by alternating knit and purl stitches, and the second row - knit one knit stitch and pull out the second. That is, do not knit one loop, but immediately remove it from the left knitting needle to the right one, as shown in the figure.

We will need 6-8 rows of this knitting. The result is a pattern like this:

Next, knit 24-28 rows in stockinette stitch. First a row of knit stitches, then a row of purl stitches.

As you can see, we have an elastic band and the beginning of the cap itself.

Now we divide the loops into three equal parts and secure them with paper clips or pins so as not to get tangled. We knit the left side as usual, and knit 2 loops to the right and left of the paper clip together.

Now we have 19 loops left. Turn the knitting inside out and knit to the next staple marking the right side. We also knit two loops to the right and left of the paper clip. The staples can be removed.

We turn the knitting to the right side again and see that there are gaps where the loops were knitted. In these places it will be necessary to knit two loops. As a result, the middle of the cap remains unchanged, but the sides are constantly getting smaller. Instead of 20, we should have 12 loops left on each side. After this, you need to equally remove 6 more loops from the middle. This leaves 8 loops in the middle and none on the sides. Knitting should look like this:

Knitted baby items are always in fashion. If the baby is expected to be born during the cold season, then why not knit a wonderful warm cap? Of course, today there is a large selection of warm clothes for newborns in stores, but hand-made knitted items for children are much more interesting. In the article you will find a detailed master class on how to knit a cap for a newborn.

How to choose the right yarn and hat model?

For kids, the best headgear model is a cap. This hat allows you to cover the ears and back of the baby’s head well, and the ties prevent it from getting tangled and slipping when the child lies in the stroller and turns his head.

The choice of knitting pattern is also important. An openwork cap will be good for spring and not cold autumn, and a tightly knitted wool model is perfect for winter walks. To make the hat truly warm, you can add a knitted or fleece lining.

Yarn for knitting is selected very carefully. Today in stores you can find a lot of options for special children's yarn, which is distinguished by excellent quality, softness and a variety of bright, beautiful shades. If the composition contains synthetic fiber, then this should not be scary, the main thing is that the skein of thread is pleasant to the touch and does not prick. But for knitting, it is better for very young children to choose the most natural threads (cotton, wool).

How to knit a reversible baby cap

Depending on the choice of threads, you can make the cap thinner or, conversely, warmer. Since the pattern consists of ordinary stripes, a diagram is not needed.

The reversible model is good because it can be worn on both the front and back sides

For needlework you need:

Yarn for children (pink color) – 100 g.
Yarn for children (white) – 50 g.
Knitting needles No. 3-3.5.
Crochet hook No. 2.

During the work, the following knitting methods are used:

Knit stitch (knit rows are knitted in stockinette stitch, and purl rows are knitted in purl stitch).
Purl stitch (knit rows are knitted in purl stitch, and purl rows are knitted in knit stitch).
Rib pattern – knit and purl stitches alternate (1x1).

Description:
1. Elastic cap
Loops are cast on (70 pcs) and two rows are knitted in pink. Then a white thread is started, and two rows are also knitted with an elastic band. Next, the pink thread is started again, and the next 4 rows of elastic are performed.

2. Main part of the cap
The main part is knitted like this: purl stitch with white thread (2 rows), a row of purl stitches in pink, knit stitch in pink (2 rows).

Note: Purl stitch and rows of purl stitches must not be confused!

This knitting method is repeated 4 times.

Next, there are 2 rows of white threads knitting “purl stitch” and the thread should be cut off.
Then, you need to purl one row of pink stitches. Break the thread.
At this stage, the knitting should be turned and the loops divided into two knitting needles (45 on the left and 25 on the right). A pink thread is attached.

The workpiece looks like this

Now knitting continues like this: 19 stitches in pink knit stitch, 20 and 21 stitches are knitted together with a purl stitch. The work is turned upside down. The described technique should be repeated.

Only 20 pcs should be knitted. medium loops. The last loop in each row of the back part is knitted together with the loop of the side part. After each row the knitting is turned over

This technique continues until three loops remain on each side.

Now the loops of the middle part need to be knitted two together, and the principle of knitting the side loops remains the same.

The last three rows of the back of the head are knitted with 2 loops each

The loops should be closed and the thread should be broken. The cap is almost ready.

Ties can be made from ribbons, laces, or crocheted from pink yarn. If you choose the crochet option, you need to knit a cord of 70 air loops and tie it to the edge of the product using a single crochet. Afterwards, the entire lower edge of the cap is crocheted with single crochets and, when we reach the opposite edge, a second tie is crocheted from air loops. The thread breaks.

This is what a crochet tie looks like

The reversible cap is ready!

Model in blue color is perfect for a boy

Knitted openwork warm cap for a newborn

To work you will need:

High-quality soft yarn – 50 g. It is better to choose 100% wool.
Knitting needles No. 2.5 – 4 pcs. The main part of the knitting is done on two knitting needles; the work is completed with distribution on four knitting needles.
Crochet hook No. 2.5. This tool will be needed for knitting ties, but if you use ribbons or ready-made cord, then it is not needed.

This model will be indispensable for a newborn baby in the spring-autumn

Knitting pattern:

1. Elastic band
The elastic is knitted from 86 stitches to a height of 6-7 cm.

2. Main part
The main part is knitted in a pattern according to the pattern. For the hat you will need 21 rapports. In this way, knitting should be continued 7-8 cm from the elastic band.

Elastic and main part of knitting

The loops are divided into four knitting needles, and knitting is done in stockinette stitch from circular rows. In this case, you need to make several decreases - in the first circular row, two loops are decreased and in the second, every 6 and 7 loops are knitted together.

Afterwards, decreases are made according to the following pattern: in the third row - every 5 and 6 loops are knitted together, in the fourth row - 4 and 5 loops, etc. Continue until there are 12 stitches left on the needles. They are pulled into a ring with working thread.

Back of the cap

The cord should be crocheted (air loops 150 pcs.). The lower edge of the cap is crocheted in two rows: the first row is single crochet, the second row is openwork. Then the cord is pulled through the openwork row and ties are obtained.

The openwork cap is ready!

An easy idea for a baby hat

This cap model is suitable not only for a newborn baby, but also for older children. Knitting it will not be difficult even for novice craftswomen. The size of the cap can be changed by casting on a different number of loops. You can use the head circumference table to guide you in choosing your size:

You will need:

Yarn made of natural wool or cashmere - 100 g (it is better to take 50 g of yarn in two colors).
Knitting needles No. 3. It is better to take long ones or fastened with fishing line.
Beads for decoration.

By changing the color of yarn and decor, the model can be adapted for a girl or a boy

Knitting methods used in this model:

Facial surface.
Elastic band (2x2).
Pattern - stripes alternate in 4 rows.

Note: The work should be done in two threads. So, the knitting will be denser and the product will be warmer.

Description:
1. Elastic band
You need to cast on 92 stitches on the knitting needles (the cap will last for 9-12 months, for a newborn the number of stitches should be reduced). The elastic band is knitted to a height of 14 rows.

2. Main part
The main part is knitted with a pattern of stripes in stockinette stitch to a height of 13 cm. The loops are closed off.

3. Assembly
The cap is sewn using two seams - first the back, then the top.

The hat is almost ready

4. Decor
Now you can crochet two laces (air loops) and decorate them with beads or just knots. You can use ready-made laces or ribbons. Then, the upper edges of the cap in the form of ears are tied with laces. You can use pompoms instead of laces, it will also be very beautiful.

A hat for a newborn boy according to this master class, decorated with pompoms

Knitting is a painstaking and difficult job, but the children's clothes that come out in the end really deserve attention and admiration. You can also crochet caps, see tutorials in the article.