DIY wreath of Christmas tree decorations. How to make a New Year's Christmas wreath on the door with your own hands: ideas, master class, photos. How to buy a New Year's wreath in the Aliexpress online store? Places where you can and should hang New Year's wreaths
A New Year's wreath is a spectacular holiday decoration. If the main New Year's attribute - a Christmas tree - is usually installed in one of the rooms, then the number of wreaths is unlimited, and they can be placed in any room, as well as on the front door outside.
Where to get a base for a wreath
The base of the wreath can be different. Sometimes it itself is a decoration, often it is not visible at all from under toys, ribbons, bows, etc. Let's try to make a simple but original New Year's wreath with a green pine base.
You will need:
Flexible wire - ordinary construction wire. A piece of such wire is easy to find at home or buy. It is good if the wire is thick and not too soft. But if this is not the case, you can make a ring from several wire circles, and then tie it in several places.
Flexible tube - we also look for it in a hardware store. We roll the tube into a ring and fasten the ends by wrapping it with wide tape or twisting it with wire.
You can also buy the base for the wreath - there are enough blanks for holiday decorations in craft stores and departments. Such rings can be made of wicker, wood, foam and other materials. The cost is low.
Greenery for wreath
On the eve of the holidays, collecting Christmas tree or pine branches is easy. But you don’t have to go looking for them - the greenery of other plants will do just fine. Perhaps you have plants growing near your house that can be successfully used: juniper, boxwood, yew berry, thuja, holly, euonymus (an evergreen form), etc. Cutting a few branches from a bush will not harm the plant.
What to make Christmas trees for a wreath from
Small ones are sold everywhere during the New Year's Eve. Take a look at a craft supply store - you will be amazed at their variety. We need white Christmas trees that will look snowy against the greenery of the wreath. Although colored Christmas trees are also interesting. In any case, in order to change the color, there is paint.
You can make fluffy Christmas trees yourself from a bottle brush. The modern baby bottle brushes are very cute. If the fluffy part is long, it is more profitable - cut the device into 2-3 Christmas trees. To give a brush with thin plastic “needles” the shape of a tree, you only need scissors - cut the “branches” into a cone.
The most fabulous and favorite holiday for children is approaching - New Year. On the pre-holiday days, streets and houses turn into a fairy tale, everything around glitters and shimmers, and on store shelves there is an abundance of New Year's decorative elements, which delights not only children, even adults do not remain indifferent.
The whole family prepares for this holiday in advance. To create a festive atmosphere in the apartment-house, we try to decorate our home with New Year's paraphernalia. Nowadays Christmas wreaths are very popular.
The tradition of decorating a house with a Christmas wreath came to us from Western countries; our citizens also liked this New Year’s decor, and we began to adopt the tradition of decorating the door with such an elegant holiday wreath.
Naturally, there are a great variety of Christmas wreath options on sale, as they say, for every taste and color. But a handmade wreath made together with a child is not just a New Year’s attribute, it is a kind of amulet for your family hearth.
It’s not difficult to make such a wreath; the most important thing is your desire, good mood and the materials you have at hand. Also, materials for such a product can be purchased in specialized hand made stores. In such shops you can buy a ready-made base for a wreath. It's worth the pleasure from 80 UAH and higher - it all depends on the size of the base and the materials from which this base is made. And what a variety of jewelry there is, in general, be patient, and most importantly, prepare financially for such a trip.
.jpg)
Wreath base
An Advent wreath consists of decorations and a base on which they are attached. Hanging wreaths are usually made of lightweight material. The basis for the wreath can be twigs, vines, the rim of a children's wheel, or straw. A piece of hose, thick cardboard or, say, a piece of wire will also work. The twigs and vines can be painted any color or left natural. A piece of hose can be wrapped in fabric or thread and also painted. In general, your imagination will come in handy. If you don’t want to rack your brains about what and how, then the Internet can help you: find a suitable master class there and create.
Ideas for decorating a holiday wreath
When the base is ready, you can start decorating the wreath. There are a lot of ideas for this action, as they say, there would be a desire.
A traditional wreath should include three colors: green (symbolizes hope), red (love), white (bright spiritual qualities).
If you and your baby prefer blue or soft purple, feel free to experiment: tradition is good, but you should like the product.
You can attach pine cones, pine branches, thuja to the base you have prepared using a glue gun, but it is better not to use spruce in the manufacture of such a product, because spruce quickly crumbles. You can also add walnuts here. To make your wreath shine, you can pre-paint the pine cones, nuts or acorns with gold or silver spray paint - and a mysterious shimmer will be ensured.
New Year's wreaths made of citrus fruits, cones, nuts, cinnamon sticks and rowan branches look very original and even have a very pleasant smell.
You can decorate such a wreath with everything your imagination tells you: tangerines, apples, dried flowers, decorative braid, etc.
If you haven’t stocked up on natural materials, it doesn’t matter, you can make a New Year’s wreath from satin or packaging tapes. To do this, you need to cut the tapes into equal pieces, for example, 6 cm in length, fold them in half, and glue them one by one to the prepared base, overlapping each other. You will get a very elegant and original wreath, and a drop of citrus aromatic mala on a fabric holiday wreath will fill your home with New Year's mood.
A tulle wreath turns out to be very delicate and airy, like snow. And those with a sweet tooth will love the New Year's wreath of candies.
You can also make a wreath that will become a decoration for more than one holiday. To do this, you will need artificial spruce branches, which can also be purchased in specialized stores; however, the prices for such products are rather high - one branch from 30 UAH and higher. The branches need to be decorated with New Year's balls, which, by the way, can be exchanged for other decorations for the next New Year. And if you weave an electric garland into the wreath, it will be especially effective.
Festive wreaths made only from Christmas balls look great. The balls need to be glued to the base and each other using a glue gun. At the end, the product can be complemented with a beautiful bow.
On the Internet you can find a master class on how to make a wreath from threads. So, you will need thick woolen threads. You need to wrap them around the base of the wreath very tightly, thread to thread, in several layers. Such a festive wreath can be decorated with felt Christmas tree flowers or felt figures - whatever your imagination tells you.
Using the same principle as a simple wreath, you can make a snowman. You just need to make the base rings of different diameters (the head, middle and lower part of the snowman). These rings can be held together with a glue gun or connected using fishing line. And you can decorate the snowman at your own discretion, for example, with a knitted hat, scarf or just a hat. Such a snowman will look great on the front door of your house or decorate the wall of a children's room - the child certainly will not mind such a New Year's decoration.
Of course, you can buy a ready-made Christmas wreath, but a wreath made together with your child carries the warmth of your hands, you put your soul into a handmade product, so such a Christmas wreath will have special New Year’s magic. All of us: both children and adults believe and hope for a miracle.
I wish you creative success and magical inspiration!
The tradition of decorating houses and apartments with wreaths came to us from Europe, where it is very common along with hanging boots in which Santa puts gifts at night, and other Christmas attributes. It is not surprising that we also liked Christmas wreaths, because they are so beautiful and the aroma of the New Year emanates from them.
In Europe and America, wreaths are hung on the doors of houses, but since we do not all live in private houses, it is better to place them somewhere in the apartment - hang them on the wall in the living room, above the doorway, or put them on the table, placing candles in the center. A New Year's wreath can easily replace a traditional Christmas tree, especially if it is made from spruce or pine branches.
Have you ever wondered why the wreath became a symbol of Christmas? In many cultures, the circle is considered a symbol of eternal life. And the green color of the evergreen spruce seems to be its embodiment. Initially, the color of decorations, ribbons and candles was also given great importance: gold and red colors were used, and the candles were purple and pink, which corresponded to the colors of worship during the four-week fasting period - Advent. We, of course, do not have to adhere to this at all; even among Catholics these traditions are rarely observed anymore.
Today, New Year's wreaths have become more of a decoration. They are made from a variety of materials. You can purchase ready-made products, but many people like to create something on their own, so why not make a New Year’s wreath with your own hands.
Wreath Decorations: List of Ideas
Below you will see many photos of ideas for New Year's wreaths with different decorations. But generally speaking, no matter what the wreath itself is made of, it is decorated with:
- berries (real or artificial) - rowan, rosehip, viburnum, mistletoe;
- dried citrus slices - oranges, lemons or whole tangerines;
- shells of walnuts and other nuts or whole nuts;
- fir cones;
- apples;
- flowers;
- ribbons of any colors or threads;
- Christmas balls;
- bells;
- all kinds of figures, including angels, snowmen, Santa Claus, houses, birds;
- cinnamon sticks;
- tinsel;
- snowflakes;
- sweets.
What materials to use for the base
The most important thing in a wreath is its base. Use any available materials. However, it is best to make the base from branches, then you don’t even have to hide it with decor. She will look beautiful anyway. In general, they are widely used as a basis:
- regular cardboard or corrugated, from boxes;
- insulation for pipes;
- wire;
- polyurethane foam;
- wires;
- tightly compressed newspapers, sometimes they are also wrapped with tape for strength.
We suggest making the base from such waste material as toilet paper tubes and paper towels.
 |
To make the base of the wreath, you will need several tubes from toilet paper rolls or paper towels. Cut them into pieces approximately 3-5 cm wide. Place them on the floor to determine the size of the wreath. |
 |
Take a thread or wire and assemble all the parts onto it. With wire, the wreath will be stronger. |
 |
If everything looks confusing during the process, that's okay. |
 |
Once the shape is assembled, tie a strong knot. |
 |
Take old newspapers cut into strips. |
 |
And PVA glue. |
 |
Moisten the wreath with glue and wrap the newspapers so that they are saturated. You can also coat the top. |
 |
Leave the wreath to dry for a day. It will be strong enough to withstand light decor. For example, this is an excellent base for later wrapping it with threads or tinsel, or securing several small spruce branches. |
Video: frame made of wire and newspapers
Wreath: base made of pipe insulation
Made from spruce or pine spruce branches
Now let's move on to the most interesting part - making a wreath. In the best traditions, the wreath will be made from spruce or pine branches. It will fill the house with a pine aroma and will look very New Year's. Branches can be attached one at a time - using twine, hot glue, or green wire. Moreover, they do this in such a way that the lower part of the branch is covered by the fluffy part of the other. You can first tie the branches in small bunches and tie them in this form to the base.
Watch the master class, here is a step-by-step presentation of the process of making a wreath from natural spruce branches from start to finish.
 |
Make a base out of cardboard. |
 |
Draw two circles with a compass or use a plate or lid from a frying pan or pot for this. |
 |
Cut with scissors. |
 |
Crumple up the sheets of paper and wrap them around a cardboard ring. |
 |
If the spruce branches are large, divide them into small branches. |
 |
Glue the branches to the base using hot glue. |
 |
Cover the wreath so that there are no gaps. |
 |
Take real pine cones. |
 |
Buy artificial branches with berries. |
 |
You will also need a bell... |
 |
and red yarn. |
 |
Wrap the yarn around the wreath. |
 |
Place the pine cones on the glue. |
 |
Attach artificial berries in random order. |
 |
Decorate with a bell. |
 |
Spray artificial snow on the branches. |
 |
The resulting wreath looks absolutely New Year's, and also exudes a pleasant pine aroma. |
It is not necessary to use natural branches; you can get by with artificial ones. You've probably seen spruce garlands on sale. It’s very easy to make a wreath from such a garland.
Video: wreath made of spruce garland
Photo ideas for decorating a wreath of fir branches
Replace the branches with tinsel
Visually, green tinsel looks like fir branches. If you wrap it around the base circle, you will get a wreath very similar to a spruce one.
Video: tinsel wreath
Although you can use tinsel not only green, but also any other color.
Options for tinsel wreaths
Wreath made from deciduous tree branches
Another option is to make a wreath from branches. Thin birch, willow branches or grapevines are suitable for this purpose. They are twisted into a tight circle and most often wrapped with twine; it matches the color well and is almost invisible. A wreath made of branches can serve as a frame for decorating with pine needles, rosemary, and branches with berries.
This wreath is made of grapevine, decorated with rosemary and laurel.
 |
Have on hand all the tools and materials you will need to make the wreath. |
 |
These are sprigs of rosemary and laurel. |
 |
Floral wire, wire wrapped in twine, garden pliers, side cutters. |
 |
Roll a grapevine wreath. |
 |
Use floral wire instead of hot glue so you can use the wreath again next year with a different decor. |
 |
Don't overcomplicate the wreath. Use a few branches of plants, decorations with natural motifs and a bright ribbon - this will be enough. |
 |
It is better to use a ribbon with wire inside so that the bow holds its shape. |
 |
Attach the decor to the wreath. |
This wreath is made from birch branches, and no other plants are used for decoration. But this is its charm.
 |
Take 9-10 thin branches - birch or others, for example, a grapevine looks good in a wreath. |
 |
Twist the branches into a circle and secure with twine. Choose the thickness of the wreath at your discretion. |
 |
Gold and red jewelry were chosen for decoration. Yellow color and gold as its shade are trendy this year. |
 |
Wrap the wreath with beads. |
 |
Tie up a few Christmas balls. |
How to decorate a wreath of branches - photo
Cones as the main decorative element
Do you know how to make a New Year's wreath from pine cones? No tricks here. It is enough to tightly cover the base with pine cones and you will already have a good option. And if you also paint it with spray paint in gold, red, pink or green - whatever color you want - and decorate it, then it will turn out great. Look at the implementation of one of the ideas.
 |
First, paint the pine cones with white spray varnish. Be sure to lay newspaper or oilcloth underneath. Leave for some time to dry. |
 |
For decoration we use: a ribbon for a large bow 5 cm wide, and multi-colored ribbons 1 cm wide for small bows. Colors to suit your taste, artificial berries, bells, Christmas tree decorations without a holder. |
 |
Let's make bows for decoration. Place two loops and tie them together. Cut off the excess. |
 |
Hot glue a small piece of ribbon of a different color in the middle of the bow to create a center and close the knot. |
 |
Decorate the bow with rhinestones. |
 |
Make a large bow according to the same instructions. |
 |
Draw a ring on the cardboard. A stencil can be a frying pan lid or a plate. Cut out the workpiece. |
 |
Take the twine and hot glue the end to the cardboard ring. |
 |
Patiently wrap the ring with twine without any gaps. Secure the tip again with hot glue. |
 |
Glue the cones so that it looks as natural as possible. |
 |
Decorate the wreath with bows, bells, and toys. |
Pine cone wreaths look unusual and beautiful, you can see this by looking at a selection of photographs.
Openwork wreaths made of pine cones: photo selection
Lots of paper ideas
When there are no spruce branches, branches, or cones at hand, they make do with paper. And interesting products are obtained. Some of them are as beautiful as wreaths made from natural materials. You can create with paper with your children; it doesn’t crack like a Christmas tree, and it’s easy to work with.
 |
It's easy to make a New Year's wreath from cardboard and crumpled paper. |
 |
Cut a circle out of cardboard; an old cardboard box from some kind of equipment will do. |
 |
Cut the corrugated paper into pieces of approximately 10x10 cm. How many parts are needed depends on the size of the cardboard ring and the “terryness” of the wreath. |
 |
Remember the pieces with your hands and glue them onto a cardboard ring. |
 |
Place the parts close enough to each other so that there are no gaps. |
 |
Cut a strip of crumpled red paper and twist it with your fingers as shown in the photo. |
 |
Decorate the wreath. |
This option is a great idea for recycling old wrapping paper. Of course, it is also not prohibited to use a new one. Such wreaths are also made from book or magazine pages or scrap paper.
 |
Prepare wrapping paper. |
 |
For the base, cut out a ring from thick paper or cardboard. |
 |
Cut a lot of wrapping paper leaves. Evenness doesn't matter, although you can use a template if you want. You will need approximately 70 leaves. |
 |
Glue the leaves to the ring as shown in the photo. If you use different papers, remember to alternate patterns. If there are any leaves left, you can glue them into places that seem empty. Make a loop of twine or ribbon, wrap it around the wreath and thread the ends through the hole. You can hang a wreath. |
Photo options for paper wreaths
We collect from Christmas tree decorations
A New Year's wreath can be assembled from only Christmas tree balls. It doesn't need expensive balls. Check out FIX PRICE before the new year, you will find what you need there. With a little investment, you can create a beautiful, rich wreath. Choose different toys that harmonize with each other in color and decorate with ribbons.
 |
To make this beautiful wreath, we used 6 packages of 12 balloons each and a few other red decorations that were lying around from last year. The wreath will be assembled on a frame made from a hanger. These are sold, for example, in Auchan. In addition, you will need tape, wire and pliers. |
 |
Shape the hanger into as circle a shape as possible. |
 |
Use pliers to unwind the wire. |
 |
Use pliers to straighten the tip as much as possible. |
 |
String the balls one at a time. |
 |
Move them as close to each other as possible so that the wire does not show between them. |
 |
Continue stringing the decorations, allowing them to be positioned at different angles. |
 |
Soon it will look like this. |
 |
If the decorations do not stick well to the wire, secure them with hot glue. |
 |
Continue stringing the balls. |
 |
When all the balls are already strung, twist the hanger again with pliers. |
 |
This is how the wreath turned out. |
 |
Take the wire tape. |
 |
Wrap it around the hook a couple of times. Secure the back with tape or hot glue. |
 |
Place several loops of ribbon. |
 |
Tie the bow with another piece of ribbon. For reliability, you can drip a drop of hot glue inside. |
Multi-colored wreaths made of Christmas balls - photos
We make New Year's attribute from fabric
Fabric wreaths look very beautiful. The most varied manufacturing technologies are used, and the resulting wreaths are just as varied. We presented three options in the form of master classes, but in fact there are many more of them.
For example, small ribbons or strips of fabric are tied tightly to each other on a wire frame.
Strips are cut out of the fabric and the edges are sewn together. The resulting “cases” are stuffed with synthetic padding.
 |
Cut strips of fabric of arbitrary length and width. Keep in mind that as a result of all manipulations, the width of the finished strip with padding polyester will be approximately four times smaller than the original one. Fold the strip of fabric right side inward lengthwise and stitch using a sewing machine. Make transverse cuts from the side of the seam, not reaching it a little, so that the fabric does not pull anywhere later. |
 |
Turn right side out. |
 |
Fill it quite tightly with padding polyester, holofiber or any other soft filler. |
 |
Sew the edges of each soft ribbon and then place the three ribbons together and pin the edges together. |
 |
Weave a braid from the ribbons. |
 |
Bring the edges together and hand stitch. |
 |
Cut and sew a short length of ribbon as shown in the photo to hide the seam. |
 |
Now let's make a bow. It will be two-sided, i.e. red on one side, white on the other. We sew the edges diagonally. |
 |
Turn it inside out. There is no need to stuff the tape. |
The fabric is also folded. It is held in place due to the tight fit of the layers to each other. The following example shows how to create a burlap wreath.
 |
To make the frame, purchase galvanized knitting wire. Cut pieces of the following sizes: 130, 115, 100 and 85 cm. |
 |
Connect them in this way, bending the ends using pliers. |
 |
Cut a few more pieces of wire, fold them several times, slide them under the frame, bend them to the front side and thus secure the inner and outer ring. |
 |
Wrap the loose ends around the inner rings. Level the frame. |
 |
This wreath is made from burlap. It needs to be cut into strips. |
 |
Secure the end of the strip with hot glue or a piece of wire, or tie it. Move the strip of fabric to the jumper, the jumper should be on the left hand. Release folds in each gap. Twist the tape, move it to the jumper and repeat the steps starting in the same direction - from the inside to the outer edge. If you run out of tape, secure it like you did the starting end. |
 |
This is such an interesting looking wreath. |
 |
Decorate it with Christmas tree decorations, lace decorations, and artificial branches. |
Photos of wreaths made of thread and fabric
Almost out of waste
The idea of creating a New Year's wreath from materials that we throw away in everyday life is especially attractive, because you won't have to spend money on them. Who would have thought that you could create a decent-looking New Year's wreath from plastic bottles? You won’t immediately understand what it’s made of.
 |
Cut the bottoms from plastic bottles and paint them the color you want. Make cuts exactly in the place shown in the photo. |
 |
Fold the corners on both sides of the cut. |
 |
These are the blanks you should get. |
 |
Connect the “flowers” from the bottles, turning them over each time. Don't forget to make a hole in the center of each piece. |
 |
String the parts onto the wire. |
 |
Decorate the wreath with bows. |
Interesting options for wreaths made from scrap materials
How to hang a decorative element
It’s not enough to make a New Year’s wreath; you also need to hang it, if you specifically designed it for this purpose. It is better to choose the mounting method in advance. It will be unpleasant if it turns out that the wreath is too heavy and double-sided tape, for example, does not hold it. Then you will have to drive a nail, and this is not always possible. In addition to double-sided tape, they use hooks on suction cups, hook them with wire to the door peephole, purchase special snap-on fasteners that are put on the door from above, and tied with tape to the handle on the back side of the door.
Create New Year's wreaths based on master classes, be inspired by photo ideas and come up with your own options.
,
However, I found a very detailed master class on the net..
1. The first thing we do is take the base, which we need to make voluminous. Cut out a stencil - a ring - from cardboard. To make our wreath look harmonious, let's remember the rule of the golden ratio - to calculate the outer diameter of a cardboard ring, you need to multiply the size of the inner diameter by 1.6.
Take twine or wire (floral) and scissors. We create a frame from a stencil and paper. Squeeze the paper tightly. We cut off the excess. With a second layer of twine we level and further compact the frame. You should try to pull the paper in one direction. We smooth out the imperfections with our hands. We get something like a donut.
3. The next step can be taken in several ways. With special staples, a hot glue gun or twine (thick, green). We will need 2 good branches of nobles (spruce variety). This variety is good because a wreath made from such a spruce will stand until spring without crumbling.
4. So, we take the spruce branches and start working with pruning shears. Place the cut branch on the inner surface of the frame and secure it with staples, twine or glue.
We must make sure that the spruce is well fixed. The thickness must be placed in different places so that it is natural. Cover all visible gaps to create a sense of continuity and uniformity. If there are any holes in the wreath, you can glue the flaws directly onto the gun.
5. The next step is decoration. We chose red and white colors. White always goes well with red. To decorate our Christmas wreath we will use: gift filler (to imitate ilix branches), Christmas balls, snowflakes from a Christmas tree garland, nuts, cones and New Year's ribbons.
First, we take ordinary Christmas tree balls and break off all the excess. We place them on the wreath first of all as the largest elements of the composition. Next, we separate the details we like from the garland - stars or snowflakes - and attach them.
6. We will make ylix twigs with our own hands using gift filler and thin sticks. We coat the stick with glue and lower it into the filler, carefully adjusting it if necessary. We attach the finished ilix branches to the wreath.
7. Paint the walnuts and hazelnuts with white water-based matte paint. We use a rough brush, deliberately not painting some areas, in order to achieve the effect of fallen frost. The paint dries very quickly and has virtually no odor. It is better to paint hazelnut twice.
The next thing we'll take is rosehip. Like hazelnuts, it is better to make clusters out of them. We wait for the glue to dry and begin decorating. We try to attach it naturally to create the impression that the berries are growing from spruce branches. For such decoration, anything will suit us: ordinary pine cones or alder, everything that grows in the forest - birch catkins, cones, pieces of bark, seed pods.
8. The final stage remains. We take a beautiful New Year's ribbon and finish decorating our wreath. You can also make the ribbon yourself. The final touch is to choose a whitewashed candle, the whiter the better. Place a candle in the middle of the wreath and decorate the Christmas table.
Very often, needlewomen create wreaths to decorate a room and create a festive mood. A decorative wreath can be made for any holiday. But sometimes when creating it, a difficulty arises at the very beginning of the creative process - there is no basis for the wreath. Today I will tell you about 10 ways to make your own wreath base.
First way
The simplest and most expensive is to buy a ready-made base for a wreath in a store. Ready-made bases are made of polystyrene foam, vines, rattan, straw, and iron rods. You yourself choose the material that best suits your composition.
Second way
The second method was proposed by Igor Linnik. First, you need to cut out a stencil for the base of the future wreath from cardboard. By the way, it doesn’t have to be a ring; it can be any shape – a circle, a star, a heart.
Next, using some thick paper (wrapping paper, newspaper), you need to create volume for the future wreath. The paper must be compressed tightly and connected with a cardboard stencil using a rope or wire, carefully leveling it.
The result is a wonderful base for a wreath.
Third way
The base for a wreath is easy to make from paper, even without a stencil. Simply forming with your hands the shape you have in mind. We can say that this is a lightweight version of the previous method.
Fourth method
You can make a base for a wreath out of paper in another way. Roll tubes out of newspapers and form them into a ring, gluing the tubes around the perimeter.
Fifth method
If you are planning a small wreath, then the base can be cut from an aluminum baking dish. The shape of the future wreath will depend on the configuration of the baking dish - round, square or rectangular.
Sixth method
What can they do from plastic bottles? It turns out that you can also make the base of a wreath. It is necessary to cut the bottles, connect them together into a ring, fastening them with glue or tape.
Seventh method
The bases for a foam wreath can be bought in a store, or you can make it yourself. You can take packaging foam, or you can buy a sheet of foam at a hardware store. It is necessary to apply the outline of the wreath onto the foam and cut out the base with a sharp stationery knife.
Eighth method
I think these wreath bases are very cute and practical. I made the base for the heart this way.
To work, you will need pipe insulation. You can take leftovers from repairs or buy them at plumbing stores. This insulation costs pennies. You can buy insulation of different diameters, the choice is very wide.
Everything is done very simply. Cut the insulation to the required length and glue the ends together. There's just one little trick. To ensure that the base for the wreath holds its shape well and does not bend, the insulation must be folded with the seam facing outward. As a result, you will have a perfectly round wreath base. 
If the insulation is large in diameter and does not bend very well, then you can glue the ends together using a piece of pipe.
Ninth method
The base for the wreath can be formed from cardboard toilet paper tubes. They just need to be glued together and secured with masking tape.
Tenth method
Some craftsmen use clothes hangers to make wreaths. Two circles are formed from a hanger, which are connected to each other using a bandage or wire. 
If you don’t have wire hangers, then use regular plastic ones. 
When the base for a decorative wreath made by yourself is ready, you can use your imagination and decorate the wreath depending on the holiday and your equipment.
Watch a master class on making a base for a wreath from branches of deciduous trees.
