Blue crocheted blouse with wrap. Crocheting a blouse with a wrap Crocheting patterns for a blouse with a wrap

Dimensions

36/38 (40/42) 44/46

You will need

Yarn (100% cotton; 110 m/50 g) – 550 (600) 650 g light gray; 1 hook No. 5.

Basic pattern

The number of stitches in the initial row is a multiple of 5 + 2.

Knit according to the given pattern.

Start with loops before the repeat, repeat the repeat constantly, finish with loops after the repeat. 1–8th r. perform 1 time, then 3–8 times. repeat constantly.

Knitting density

14.5 p. initial row x 9 p. = 10 x 10 cm, knitted with the main pattern.

Pattern

Completing of the work

Back

Complete the initial chain of 67 (72) 77 vp. + 1 additional ch. rise and knit with the main pattern.

Left shelf

For bevel after 10 cm = 9 r. from the initial row on the left side in the next row (= 4th row of the pattern), instead of the 1st rapport, perform only 1 st. b/n, knitting all the loops together. In the next row this st. b/n skip. Thanks to this, there was 1 less rapport in the work. Repeat this decrease 2 more times after every 2nd row of twisted columns, then 5 times after each row of twisted columns.

After 17 cm = 15 r. Finish the work from the initial row.

Right shelf

Knit like the left front, but in a mirror image - make decreases on the right side.

Sleeves

Complete the initial chain of 52 (57) 62 vp. + 1 additional ch. rise and knit with the main pattern.

After 27 cm = 24 r. Finish the work from the initial row.

Assembly

Place all the details together (right front, right sleeve, back, left sleeve, left front) and knit on all the pieces with the main pattern, while continuing to decrease on the fronts.

To give shape after 33 cm = 30 r. from the initial row, evenly distributed, decrease 12 repeats. To do this, in the next row (= 7th row of the pattern), after decreasing for the bevel, perform only 1 stitch over each 3rd group of crossed loops. b/n (instead of 5). In the next row this st. b/n skip.

In the same way, after 37 cm = 33 r. from the initial row, subtract 6 more rapports. To do this, instead of every 4th group of crossed loops, perform 1 tbsp 6 times. b/n.

After 40 cm = 36 r. from the initial row, subtract 2 more repeats, as described above; to do this, in the middle of each sleeve, instead of 1 group of crossed loops, perform 1 tbsp. b/n.

After 43 cm = 39 r. Finish the work from the initial row.

Sew side seams and sleeve seams. Tie the edges as follows: attach the thread at the sharp corner of the left shelf, make a chain of ch. 100 cm long and tie it 1 p. Art. b/n.

Then tie the bottom edge of the jacket 1 p. Art. b/n, from the acute corner of the right shelf, make a chain of vp. 100 cm long and tie it 1 p. Art. b/n, then tie the sides and neck 1 p. Art. b/n and 1 r. “crawfish step” (= st. b/n, perform in the direction from left to right).

Photo: “Little Diana” magazine. Special issue" No. 2/2016

Dimensions: 38/40 (42/44).

You will need: 250 (275) g of cyclamen-colored yarn (48% mohair, 42% polyamide, 10% cashmere, 150 m/25 g); hook No. 3.5.

Main pattern: the number of loops is a multiple of 8 + 1 + 1 air. lifting point. Knit according to pattern 1. Each r. start and end 1 air. p. lifting in addition to the 1st st. b/n or 3 air. p. instead of 1st tbsp. s/n. Start with loops before repeat, then repeat repeat loops, end with loops after repeat. From 1st to 6th p.m. perform 1 time, then repeat from 3rd to 6th row. Starting from the 2nd day, art. s/n knit under the air” p. of the previous row.

Lace Pattern: the number of loops is a multiple of 23 + 1+3 air lifting stitches. Knit as the main pattern, only according to pattern 2. From the 1st to the 12th row. perform 1 time, starting from the 3rd p, all groups of art. s/n knit under air. p. previous p.

Knitting density:
main pattern: 25 p. and 13 r. = 10 x 10 cm;
lace pattern: 24 p. and 12 r. = 10 x 13 cm.

Advice: make a life-size pattern and make decreases and additions by applying the pieces to the pattern.

Back: knit a chain of 129 (145) chain stitches + 1 chain stitch. p. rise and knit with the main pattern. After 3 cm from the start of work, leave 0.5 cm unknitted on both sides for fitting, then 7 x 0.5 cm in every 3rd r.

After 25 cm from the start of work, add 0.5 cm on both sides and 7 x 0.5 cm in every 3rd row, including the added loops in the pattern.
After 44 cm from the start of work, leave 2 cm unknitted for the armholes on both sides and in each r. 3 x 1 cm.
Finish the work 63 cm from the start

Left shelf: tie a chain of 89 (97) air. p. and knit with the main pattern. Decreases and increases for waisting and armholes on the right edge as for the back. After 25 cm from the start of work, leave the left side unknitted to bevel the neckline 1 cm, then 42 x 0.5 cm in each r. Finish the detail on the remaining shoulder loops at the height of the back,

Right shelf: knit symmetrically.

Sleeves: knit a chain of 65 (81) chain stitches and knit with the main pattern. For bevels, add 8 x 0.5 cm on both sides of the initial row in every 5th row, including the added loops in the pattern. After 33 cm from the start of work, leave sleeves 2 cm unknitted on both sides for rolling, then 3 x 0.5 cm in each p., 3 x 0.5 in each 2nd p., and 2 x 0.5 cm in each 3rd r.; in every 2nd r. leave another 0.5 cm and in each r. 1 x 0.5 cm and 2 x 1 cm unknitted.
On the remaining loops, finish the parts 49 cm from the start of work.

Assembly: sew shoulder and side seams. Tie the lower edge of the pullover and the lower edges of the sleeves with a lace pattern, while in the 1st row. Knit 300 (323) stitches along the bottom of the pullover. b/n, and at the bottom of the sleeves - 93 (116) art. b/n. After 12 p.m. finish the work. Sew the sleeve seams. Sew in sleeves. Tie the front edges of the shelves, the back neckline and the short sides of the lace pattern with 1 p. Art. b/n.

For laces, tie 1 chain of 40 and 80 air. p. and tie them 1 r. connection art. Sew a short cord to the beginning of the neckline of the right shelf, a long cord in the appropriate place to the left shelf.

This model is made by knitting and crocheting. Sizes 36,40,44. Data for sizes 40 and 44 are in parentheses; if there is only one number, this applies to all sizes. Material: 100% mercerized cotton (Mako), thread length 125 m/50g, sand color 300 (350, 400)g. Knitting needles 4 mm, Hook 3.5.

Basic pattern: Stockinette stitch on needles 4, knit looser than indicated on the label. (Knitting density: 20 p and 27 r = 10 × 10 cm). Crochet Crochet number 3.5 following crochet pattern 1 once from rows 1 to 12. Rapport 1 = 5 sts, repeat 2 = 15 sts. In rows 1 to 3, repeat rapport 1, starting from the 4th row, switch to repeat 2. Lace insert: Made using the Irish lace technique. Individual motifs are knitted according to the pattern, which are then connected by chains of air loops and connecting posts. Small circle: close a chain of 4 ch, 2 ch, 11 dc into a ring. Large circle:: close a chain of 4 ch, 3 ch, 14 double crochets into a ring. End the circle with a connecting column.

interesting selection for the site 18 blouses only for girls

DESCRIPTION OF THE WORK Back Cast on 74 (88.104) sts and knit in stockinette stitch, to form side bevels on each side near the edge loops in every 8th row, knit one loop from the broach once (crossed) = 86(100.116 sts). For armholes, close 20 (21.22) cm from the beginning of knitting on each side with 3 (5, 7) stitches and in each next 2nd row 5 (7.9) times 1 more stitch = 70 (76, 84) p. At a height of 38 (40.42) cm from the beginning of knitting for shoulder bevels, close on both sides in every next second row 1 time 5 and 3 times 4 (4 times 5.4 times 6) p. At a height of 40 (42, 44) cm from the beginning of knitting, bind off the remaining 36 sts. Left front Cast on 74 (88.104) sts and knit in stockinette stitch. Perform the side bevel, sleeve armhole and shoulder bevel formation in the same way as on the back. To bevel the left edge of the shelf, 2 cm from the beginning of knitting, begin to decrease the loops as follows: in every second row 12 (14.16) times 2 p. in every next second row 25 (28, 32) times 1 p and in every next 4 Row 6 more times 1 st. Total length 40 (42.44) cm. Right front Cast on 37 (44.52) sts and knit in stockinette stitch. Perform the side bevel, sleeve armhole and shoulder bevel formation in the same way as on the back. To bevel the right edge of the shelf, 2 cm from the beginning of knitting, begin to decrease the loops as follows: in every second row 3 (4.5) times 2 stitches and 29 (30.32) times 1 stitch. Pattern 2 and connect. You will find a life-size layout of the motifs for size 36 in the picture. Sleeves Sleeves are crocheted starting from the top down according to pattern 1. To do this, cast on 17 (23,23) air loops, then turn in p, 1 row of single crochets then move on to the second row, but make the transition instead of 4 tbsp. n. always only 1 tbsp. Continue knitting according to pattern 1. After 12 r, finish the work. Total length 14 cm.

Assembly Stretch the parts, moisten them and let them dry. Sew seams and sleeves. To form a peplum along the folded edge, crochet the frill following pattern 1, starting from the left side of the back (if the jacket was worn), then moving without breaking the thread to the right front, knit the first three rows, from the 4th row, knit according to pattern 1 from the middle of repeat 2, then another 11 (13,15) repeats 2, finish the row with half of repeat 2. After 11 rows of pattern 1, finish the work. On the side of the left shelf, knit only 1 row with single crochets. Crochet the edge of the frill, the front bevels and the back neckline with single crochets, then 1 r picot. On the frill, knit a picot according to pattern 1 (12th row), according to the wrap of the front and the neckline of the back, knit alternately 1stbn1stb n with picot. Secure the left side of the shelf with a few stitches under the right. Make 2 cords approx. 30 cm and fasten one of them on the right shelf, and the other in the left side seam, focusing on the picture. Tie a bow.

Size: 46-48

The jacket is crocheted in one piece.

You will need: 300g textured viscose and 300g cotton with viscose; hook No. 3, 2 pearls.

Drawing: main pattern according to scheme 4.

Connect 2 threads and knit a chain of air. loops (VP). Close 7 VPs into a ring, continue it to a length of 45 cm (back width) and end it with a second ring of 7 VPs (Fig. 4) Knit 2 VP rises and tie the ring, as shown in diagram 4, then continue knitting the row until another ring. Tie it similarly to the first one and then knit it further according to the pattern from one ring to the other, tying them according to the pattern. From the 8th row, do not knit the rows on one side and the other into 2 stripes, as shown in the diagram. Having knitted 21 cm from the center of the rings, allocate 4 stripes to the sleeves (check the size by trying them on). Add a chain stitch between the back and front so as to maintain the pattern and continue knitting the back and fronts, repeating rows 7-9, to the desired length. Then tie up the sleeves.

Jacket trim. Tie the shelves, neckline and sleeves with “fans”, and then “crawfish step”.

Size: 34/36

You will need: 350 g of white cotton and viscose yarn (125 m/50 g); hook No. 3.5; 1 m of white satin ribbon 1.5 cm wide.

Seashell pattern: the number of loops is a multiple of 6 + 1 + 1 air. lifting point. Knit according to pattern 1. Start with loops before rapport, repeat repeat loops, end with loops after repeat. Do it 1 time from the 1st to the 3rd row, then repeat the 2nd and 3rd row.

Pineapple pattern: the number of loops is a multiple of 18 + 13 + 1 air. lifting point. Knit like a pattern of “shells”, but according to pattern 2. Do it 1 time from the 1st to the 5th row, repeat 5 (6) times the 4th and 5th row, finish from the 6th to 14th r. = only 24 (26) rub. The numbers in brackets refer to the sleeves.

For 9-12 months

You will need: yarn “Pearl” (50% cotton, 50% viscose, 425 m/100 g) - 100 g blue, hook No. 2, 2 fasteners, Velcro.

Attention! Before starting work, make a life-size pattern.

Back and shelves: dial a chain of 215 air. p. + 3 air. p. rise, knit 1 row st. s/n. Next, knit the pattern according to the pattern, alternating 5 rows of fillet mesh and 5 rows of stripes. At the same time, decrease in each row on both sides in accordance with the pattern. At a height of 15 cm from the start of work, divide the work into 3 parts and then knit each part separately, leaving 3 cm on each side for the armholes.

Sleeves:

Cast on a chain of chain stitches. 20 cm long (29-30 cells). Knit 15 rows with fillet mesh. Then knit 3 strips of st. s/n, alternating them with 1 row of fillet mesh.

Assembly:

Sew shoulder seams, sew in sleeves and sew sleeve seams. Tie the edges of the shelves, neckline and bottom edge of the product with 1 row of st. b/n. Sew fasteners.