Patterns for a variety of evening dresses, fashion reviews and ideas. Modeling lesson: How to sew a dress for a beginner

Simple DIY dress- This is a great opportunity to show your creative abilities. You can sew it not only for everyday wear, but also for a holiday.

Simple DIY dresses

Before cutting the fabric, prepare the necessary materials and tools for the job. Do this in advance so that the work goes faster and more fruitfully. What will you need?

Textile. If you are just trying yourself as a fashion designer and seamstress, then it is better not to use very thin or dense fabrics. It is equally important to choose the right pattern. Choose fabric with an abstract pattern so that you don’t have to match and match it as you work. If the fabric has a large pattern, then you need to take it with a reserve in order to freely adjust the pattern;

Tools. You need a meter, large scissors, several types of needles, strong threads to match the color, chalk, pins.

There are many simple patterns that can be sewn without a pattern. However, you still have to take measurements to estimate the amount of fabric needed. We suggest starting with this option. Draw 2 rectangles measuring 65 by 80 cm and 2 more rectangles measuring 55 by 35 and 2 rectangles measuring 7 by 25 cm. These are standard sizes. They can be changed based on your parameters. Cut out the drawn bases, carefully outline them with chalk and apply them to the fabric. Be sure to mark the armholes.

Sew also. The young fashionista will definitely be delighted with the new thing and will wear it with pleasure.

Mix the bases together. Start working from the area of the hands, chipping them with pins. Baste with bright threads. Sew the basics on a machine. If you have a serger, overcast the edges on it. Sew on the sleeves, bend the neckline 2 cm, sew, insert an elastic band into the groove. Finish the edges of the hem and iron them. The last stage is decor. This can be a thin chain, a discreet brooch or any decorative element that will make the model more beautiful and elegant.

Take all measurements carefully; if even one of them is done incorrectly, the product can simply be ruined. Each measurement should be taken by connecting the dots on the figure. You need to make a reserve on your stomach. There are basic and additional measures. To sew simple dress models, additional measurements are usually not required.

Simple patterns can be immediately transferred to fabric and do not use paper. If you want to sew a long dress, it will take about 5 meters of fabric to sew it. Buy material in reserve. If you plan to wear the outfit with heels, you will need more material. You can make decorative elements from leftover fabric, complementing them with rhinestones, beads, and elegant flowers.

Fold the fabric in half, draw a radius R from the corner. Draw a radius L in the same way. Cut out the skirt along the resulting lines, leaving some extra for the fabric. Cut out 2 rectangles - these will be the straps. Cut out the belt according to the details. All patterns are ready, you can start sewing. Stock up on safety pins, needles and thread and remember to make sure to stock up.

What do you think?

Start sewing from the straps - fold the parts in half, secure with safety pins, and carefully sew along the length. Now sew the straps along the width. Treat the belt in the same way. It's time to sew the skirt. First, process the hem, and then the side sections. Measure the length from the line of the skirt and set aside another 4 cm from it. Step back 4 cm from the resulting point, bend it, apply a wrap, align the marks for it, slowly, sew very carefully.

Mark the middle of the front and back of the skirt, overlap the straps, and sew the resulting layers. The last stage is trying on the product. Carefully put it on yourself, look at all the stitched areas to see any imperfections. Carefully iron all seams. If desired, the model can be decorated with a brooch, scarf, bow, etc.

Consider and.

Simple DIY summer dress

A summer casual dress should have the simplest cut. Even an inexperienced seamstress can sew it. As a rule, in a summer outfit the emphasis is on fabric. It should be natural and let in as much fresh air as possible. It can be linen, cotton or chintz.

Preparatory stage

One of the most important points is to take measurements correctly and create a pattern. The slightest mistake can lead to the model being skewed and not fitting well on the figure. Especially if this concerns fitted outfits. In order to sew a summer dress, you need to take the following measurements:

Shoulder length;
- waist to hip circumference
- neck circumference
- length of the product
- length from back to waist
- girth above the chest and the chest itself

Simple DIY summer dress with elastic bands

This is a great option for an informal meeting, an evening stroll and a seaside resort. The pattern of this model is very simple and is a trapezoid or a regular rectangle. An elastic band will help give the product its shape.

DIY dress is easy and simple

Sundress-sun

The sun-flared style is very popular among fashionistas, because in such a simple outfit any girl will look fashionable and beautiful. The model can be made short or long. Based on the pattern, you can sew a dress and a sundress. The last option is perfect for summer.

Stages of work:

1. Take a square piece of light fabric and cut out a circle. The radius of the circle should be equal to the length of the skirt + waist.
2. For the bodice you will need a rectangular piece of fabric. The length of the segment should be equal to the circumference of the chest area, and the width should be the distance from the waist to the desired level of the dress + 3 cm.
3. Sew the bodice. Darts will help create a fitted silhouette. Sew a zipper at the back.
4. Make an armhole in the center of the circle for the skirt. It should be OT+ 10-15 cm. If this neckline is moved a little down, you will get an asymmetrical skirt.
5. Sew the bodice with the skirt, sew on the straps, and trim the edge of the outfit.

You will be able to sew and.

Simple DIY dress for beginners

A Greek style dress is a model that will always be in fashion. Any fashionista can sew it for her wardrobe.

First way

1. Select a large piece of fabric.
2. Secure the top of the outfit at the shoulders. This can be done using pins or brooches.
3. Attach the model at the waist with lace or a narrow braid. Sew the side flaps so that the model does not swing open while moving.
4. Line up a suitable drapery and secure with braid.
5. Finally secure the gathered folds using a sewing machine.

Method two

1. Select a piece of fabric that should be 2 times your height. Additionally, add a couple more centimeters.
2. Spread the fabric on the floor and draw a straight line in the center. This way you have marked the shoulder area.
3. Now you need to decide on the depth of the neckline. Mark the desired level with chalk. Draw the lines to the mark, cut out.
4. Gather the material along the shoulder line and secure with pins.
5. Tie a ribbon around the outfit under the bust. Drape the fabric by pinning it to the ribbon. Do the same with the second breast. Do the same with the ribbon at the waist.
6. Remove the pins one by one and sew all the folds. The front part of the model is ready.
7. Make the back of the model similar to the front.

DIY simple dresses patterns:

Method three

1. Choose or sew an outfit that fits your figure well.
2. Choose a flowing fabric that should match the shades of the main material. Put on a base dress and throw one piece of fabric over your shoulder.
3. Make a hole for the head.
4. Drape the material and pin it to the base.
5. Sew the folds using simple stitches, gradually removing all the pins.
6. If you are completely satisfied with the drapery, remove the rough thread, trim in the right places, and tighten the material.
7. Sew the outfit in a suitable manner.

Have you long had the desire to sew an outfit with your own hands, but kept putting it off? Now you can safely go to the store and buy the appropriate material to create your first masterpiece. Who knows, maybe the process will captivate you so much that you will very quickly expand your collection. We have put together for you a collection of the simplest, but very beautiful dresses that will highlight your figure and make your look stylish and unique.

Hello, my dear readers of the blog “site”! I am glad to welcome you! And today we will sew something beautiful floor length dress, evening, or maybe not (if you take a different fabric). In any case, if you understand the general principle that I will outline below, you can sew any number of a wide variety of dresses for yourself using this one model.

First, I want to clarify that the downloadable pattern below is designed for the following sizes:

St (half waist circumference) = 37 cm;
Sb (half hip circumference) = 50 cm;
Arm length = 61 cm.

The finished pattern corresponds to sizes 44-46, the dress is made of fabric that is very stretchy.

For this dress you will need:

3 -3.5 meters of stretch fabric;
Bias tape for knitwear - 1m;
Needle for knitwear and stretch for sewing machine;
Mesh (30 cm) - optional, to decorate the bottom of the dress.

Download the pattern for the top of the dress and sleeves.

And we will build the skirt ourselves. The skirt is part of a circle, such skirts are called conical or conical. And the construction is carried out using a coefficient that is chosen depending on the shape of the skirt.

SKIRT SHAPE		COEFFICIENT

"Flash"		1,4
Big flare		1,2
Small bell		1
Middle bell		0,9
Big bell		0,8
half sun		0,64
Sun		0,32

I wanted to sew a half-sun skirt; in my opinion, this is a very good choice for an evening dress. Perhaps a circle skirt would look and play even better, but such a dress requires twice as much fabric. So I opt for this skirt model.

Half-sun skirt. Construction.

In order to build a skirt, you need to fold the fabric face to face so that you get a square with sides of 1.5 meters (this is taking into account that the width of the fabric you bought is 1.5 meters, sometimes 1.4 - will also work).

Please pay attention to the side where the edge of the fabric passes - this is the grain of the fabric, and we will build a drawing by laying the fabric on the floor, just like the fabric, marking with chalk or soap.

In the drawing it will look like this:

In the upper left corner under the fold of the fabric we place point A.

From point A we draw a straight line parallel to the edge to the very bottom of the fabric.

From point A we put down = St × coefficient = 37 × 0.64 = 23.7 cm. We put point T.

From point T, set down the desired length of the skirt from the waist. For me it is 110 cm.

We place a compass at point A and draw arcs from points T and H. In the drawing this is done with a compass, and on the fabric with a measuring tape: hold the tape at point A at the starting mark with one hand, and with the other hand hold the tape at point T with a piece of chalk, and draw the radius along the fabric like a compass.

We also draw an arc from point H.

On the arc from point T we plot the width of the skirt along the waist line - for us it is 37 cm. Through the resulting point and point A we draw a straight line along the entire width of the fabric. The drawing should look like this.

We cut out our skirt, take allowances of 1.5 cm.

From the remaining fabric, cut out the front part of the top with a fold, the back part of the top with a fold and the sleeves. I would like to note that 3 meters of fabric were taken end to end, so try to lay it compactly; to be on the safe side, you can take 3.5 meters of fabric initially.

Now we definitely need to hang up our skirt sag, having previously stitched the waist line with a straight stitch. Why is this being done, you ask? This skirt is cut on the bias, i.e. the lobe line runs along the side, and in the center of the skirt there is an oblique line. And in order for the product not to sag when worn, you need to hang the skirt in this way (as in the photo below) for 3 days. This time is enough for the oblique threads to stretch out as much as possible under the weight of the skirt itself and not then deform the finished product when worn.

Do not neglect this point; you will be surprised how much stretched fabric you will have to cut later.

After three days, you need to put the skirt back on the floor, and straighten the bottom of the skirt (cut off the excess) so that there is 110 cm from the waist everywhere (this is mine, you take your own length).

Sew the skirt along the side seams.

Now let's start processing the neck of the dress. We measure the front neckline with a centimeter tape, cut out this length (you need to take a little more - 2-3 cm) from a knitted trim.

We go around the cut of the neck with bias tape, folding it in half and putting the cut into it, basting it if you are doing this for the first time. And carefully and carefully sew it on the machine. Here you need to adapt and “get the hang of it” so that the edging turns out perfect, I got it right the first time, although I had to loosen it up a little and correct it. I hope everything works out for you too))

The photo shows the treatment of the neck of the dress, only made of red fabric.

It turns out such a neat edging. Not very well, however, black on black is clearly visible in the photo, but I couldn’t photograph it any other way(.

We sew the sleeve into an open (as in the photo) or closed (then first we sew the top of the dress on the sides, and sew the sleeve with a tube) I'll get it.

We process the cut of the sleeve near the wrist: we turn the seam allowance to the wrong side and sew it on the machine.

Sew the top of the dress to the skirt, matching the side seams.

We process all internal cuts with an overlock or zig-zag stitch. Although, to be honest, my fabric did not fray at all, but folded up like a tube, so I did not process the seams on the inside.

Then I wanted to decorate it, and I sewed a strip of mesh on the bottom, 8 cm wide and length = the circumference of the skirt. And along the edge of the mesh I also sewed a piping 1 cm wide and length = the circumference of the mesh.

Here. This is such a cute dress. And the most wonderful thing is that it is sewn in 2 hours!!!

Watch another video with an idea on how to quickly and easily sew a floor-length dress:

I wish you good luck and creative success! And sew with me! See you soon on the pages of the blog “Sheisomnoy.rf”!

A light summer dress will highlight your femininity and charm. And if you know how to sew and love to sew, then with our patterns you can easily create a comfortable summer outfit with your own hands. We wait all year for summer, when we can wear light, airy clothes. Of course, we want to update our wardrobe with a beautiful summer dress, perhaps more than one.

Many will go on vacation, and new summer dresses, both short and floor-length, hand-sewn, are simply necessary. Even if you yourself are not very good with a sewing machine, it’s worth trying to update your summer wardrobe with the help of patterns and instructions. We hope that you will like one of the proposed cut options.

Before we start cutting, let's look at the size options so that we know which size corresponds to which data.

This will make it easier for us to decide on the pattern, because the size of the product is not always mentioned. The table is clear enough for you to determine the size yourself.

Correspondence tables

In hot weather, a loose-fitting summer dress, sewn with your own hands, may come in handy. We sew a dress for the beach. Fabrics such as silk, satin, linen, cambric, viscose, and light acetate are suitable for such a dress. Even the cheapest silk will do: silk satin, silk chiffon. But by no means polyester; in synthetics the body does not “breathe” at all.

Keep in mind that viscose, especially wet, tends to stretch when worn. And silk, like linen, always shrinks after washing.

Before sewing the product yourself, try sewing a small piece of this fabric; you may have to change the needle or threads in the machine. It is best to buy needles from Schmetz and Organ. The size of this beach dress is 46-48. If you would like to make a pattern for a different size, please measure your chest circumference. Next, on the pattern, instead of 25 cm (chest line), we set aside ¼ of the girth of your chest + 1 cm seam allowance + 2.5-3 cm for light volume of the figure. We do the same with the volume of the hips: instead of 27 cm (hip circumference), we set aside ¼ of the volume of your hips + 1 cm seam allowance + 2.5-3 cm for light volume of the figure.

We choose the depth of the neckline ourselves. It’s better not to make a large cut right away; it’s never too late to trim off the excess. We make the length of the dress at our discretion. Don't forget to leave fabric for the drawstring, cord waistband and four small cords to tighten the shoulders. We ourselves mark with chalk the place of the belt-cord, it will be just below the waist. We baste the drawstring to the intended line. We adjust it from the front side, tucking the cuts on both sides. If the drawstring is on the front side, then on the drawstring itself two longitudinal or round holes are made for the exit of the belt-cord. We sew the holes by hand with our own hands. The belt-cord should move freely in the drawstring.

Next, we begin to sew the shoulders. We sew the shoulders together so that there is 2.5 cm of fabric left for the cord. We iron the shoulder seams and sew them, folding the fabric inward. We should have 4 drawstrings on two shoulders. We thread the cords through them, tighten them a little and tie them together. The shoulder turns out to be slightly gathered. We hem the bottom, the hand-sewn dress is ready. Choose a plain fabric or with a large floral pattern, this is very popular. We sew the selected classic model.

A dress with a peplum is a very feminine dress; it favorably emphasizes the features of the figure. Let's try to sew such a dress with our own hands using a simple and understandable pattern. A peplum is a wide frill that is sewn at the waistline. This dress will appeal to most ladies. So, ladies with light weight can visually increase the volume on their hips with the help of a peplum, and for overweight ladies a peplum will help hide the excess. In this case, the peplum should be sewn above the waistline. The only thing to remember is that such dresses look best on a tall or medium-sized lady. We are sewing a beautiful dress for the summer.

Our pattern is given for size 50 (see table above).

The pattern includes a back (2 parts) and a cut-off front (2 parts), the bottom is separate, it is a straight skirt consisting of two parts. The peplum is cut separately. On the pattern, segments T1H1 and TN have the same length, which is equal to the length of the peplum. TT1 is the waist line. If you are sewing from thin fabric, then it is better to duplicate the peplum with lining material, possibly from the main fabric. Then the peplum will keep its shape better. It will look original and interesting if the peplum has an asymmetrical length: short in front, long in back. Don't forget to baste and then sew in the zipper on the back of the piece. We process the neckline and armholes as in.

How beautiful and romantic dresses with a full skirt look. This model can have many options, with or without sleeves, with elastic, with a zipper, and so on. The dress softly fits the figure at the waist, and is maximally widened towards the bottom. It is quite possible to sew such a dress with your own hands. If you yourself are not very good at sewing, we would recommend sewing such a dress with elastic, then you will not have to particularly adjust it to your figure. If you lengthen the sun skirt, you will get a floor-length dress. The skirt can be made not so fluffy, for example, half-sun.

The pattern is suitable for sizes 48-50 (see table above). Fabric: silk, chiffon, satin, stretch cotton, and so on. If the length of the skirt is 55-60 cm, then with a fabric width of 140 cm you will need approximately 2.5 meters of fabric. In this model, the hidden zipper is located on the left side.

Sequence of cutting and sewing

After you have decided on the length and style of the dress for the summer, it is better to first make a drawing on paper. If you are a beginner seamstress, take your time cutting the fabric, make a drawing, pin the paper and try it on. If everything fits, then pin the pattern to the fabric and cut it out, not forgetting the seam allowances (1-2cm). The size of the allowance depends on the fabric. If the fabric “crumbles”, you need to take a larger allowance. We lay out the cut details, choosing any fraction.
The armhole and neckline are finished with a facing cut on the bias. We sew all the darts and iron them. We overcast the side seams of the bodice and grind them down. On the left side we leave a hole for sewing in a zipper. Press the side seams.
Stitch and iron the shoulder seams.
We process the sections of the armhole and throat with a facing cut on the bias.
We sew the seam of the skirt, pulling the seam with our own hands. We do not sew the seam all the way down, leaving room for the zipper. The circle skirt must be pulled down from the waist, it should sag.
Along the waist allowance, we manually assemble it using a small “needle forward” seam. We tighten the waist.
We pin the bottom of the bodice and the top of the skirt with the right sides facing inward, aligning the side cut.
We sew the bodice into the skirt. We sew the zipper into the side seam.
Iron the seam connecting the bodice with the skirt towards the bodice.
Align the bottom of the skirt and hem it with a closed hem. Iron the bottom. The dress is ready.

Using the same pattern, you can sew a long floor-length dress. For example, here is a long floor-length dress with an asymmetrical sun skirt.

The cut of this dress is different in that we add the following part to the main half-sun:

Long dress master class

You can sew a long floor-length summer dress with your own hands if you use our master class. An original long dress with a fitted silhouette will highlight the advantages of your figure. A floor-length dress can be worn both during the day and in the evening, on a holiday or in a cafe. The dotted line indicates the facing.

Every woman wants to look luxurious. A floor-length dress is always in trend, and at the same time makes a woman’s figure more sophisticated and attractive. And if this dress is sewn with your own hands, then wearing it is twice as pleasant.

Necessary materials for a DIY floor-length dress

A floor-length dress can be completed in half an hour. Even with a simple style, such a dress always looks elegant and original. Helps hide your flaws and highlight all the advantages of your figure.

To sew a dress of any style you will need:

Fabric for sewing.
Sewing threads.
Needles and pins.
Tape-centimeter.
Soap.
Pattern paper.
Scissors.

Happy owners of sewing machines will be able to cope with this task
much easier. Because the sewing work will be done with a sewing machine and not with your hands.

Choosing a floor-length dress model

To ensure the job is done correctly, the following sequence of actions should be followed.

Decide on the model of the future floor-length dress. You should take into account all the features of your figure. You can ask someone from the outside to look at your choice and express their opinion about the style. You can also go to the store and try on a dress of a similar style, and consider all the tailoring features of this model.
We select the fabric. It can be either plain or with a pattern, it’s a matter of taste. The only thing is that you should take into account the seasonality of the product and the density of the fabric.

Now you can start replenishing your wardrobe with a universal item - a floor-length dress.

The process of sewing a floor-length dress with your own hands

After choosing a style and purchasing the fabric you like, we begin sewing.

Take measurements of your figure: top length - from neck to waist; length of the entire product; length between waist and hem; width between shoulders; chest girth; waist circumference; hip girth.
We make a pattern according to the measurements taken. Patterns of certain models can be found on the Internet. Just remember that the finished pattern should be adjusted to your size.
Convert the dimensions of the pattern onto the fabric. We pin it to the material with pins and outline it with soap. Remember that you should retreat 1 cm from all seams.
We cut out the fabric according to the design and process the edges of the workpiece so that they do not curl or bulge.
We baste in all the right places. We arrange the necessary ribbons, snakes, etc.
We sew all the details by machine or by hand. We sew armholes and hem.

Such simple steps will give a very interesting version of a floor-length dress.

An example of making a floor-length dress from scrap materials

To make a floor-length dress from scrap materials you will need:

T-shirt.
Fabric for the skirt.
Fabric for the belt.

The necessary sewing tools are described above.

By following the steps below, you will receive an exclusive outfit.

Making the top part of the dress. On the T-shirt, measure the length from the neck to the waist, adding a few cm for the allowance. Trim the bottom of the T-shirt.
Let's make a skirt. Cut off two pieces (front and back), length from the waist to the floor. The fullness of the skirt will depend on the width of these pieces.
Sew the hem. We connect the sides of the skirt and sew them together.
We make folds on the skirt. Using a needle and thread, baste the area of fabric intended for folds. Pull the end of the thread and get neat folds.
Sew it together. Turn the T-shirt inside out and secure the skirt with pins. Place the folded area in the center and sew the top and bottom.
Belt. We sew a long tube from the prepared fabric for the belt. The width of such a pipe is at your discretion. Turn it inside out and get a belt. It can be sewn all the way to the front or just on the side seams. We tie the free ends of the pipe with a beautiful bow at the back.
We sew the bottom of the skirt. That's it, the outfit is ready. An extraordinary floor-length dress was created quickly and without much expense.

Using your imagination and sewing skills, you can make an original outfit yourself without any problems, using a variety of colors and their combinations. It’s easy to feel like a designer, especially when you don’t have to spend a lot of money. Take on the job boldly and everything will work out for you.

Choosing a dress for the New Year is not an easy task. As a rule, there is no time to run around shopping in search of “the one.” It’s scary to buy on the Internet, because the size may not fit, and it’s unclear what color and fabric will arrive in your package, and most importantly, when. Many girls are ready to sew a dress on their own, but not everyone has enough experience and it is not always clear where to start. Let's figure it out together.

What fabrics are best for beginners?

The choice of fabrics is now not limited by anything, except, perhaps, price. Look at the styles we offer and decide exactly what your dress will be. After this, feel free to go to a store, for example, fabric house "Tissura", and choose something to your liking.

To ensure that the result does not disappoint you in the end, it is important to choose the right fabric - beautiful and not difficult to work with.

1. Do not buy silk or satin fabrics under any circumstances. that do not stretch or crumble along the edges (especially light ones). They are usually very difficult to work with. For a dress to look decent, every line must be placed perfectly, all seams must be in place.

2. Better opt for knitwear. Don't be alarmed, knitwear can be very thin and light. If the fabric stretches slightly, it will be much easier for you to cut, and the dress will fit perfectly. There will be no need for any extra darts or complex tucks. In addition, it is easy to process the edge of such fabric. Sometimes it’s enough to carefully cut off the excess and you don’t have to hem it at all.

3. Don't choose a complex print. The ideal option would be, or vice versa, a dusty shade, or a light, barely noticeable ornament.

4. Before you go to the store, be sure to decide on the style , calculate the amount of fabric needed and take into account all additional materials: threads, machine needles, elastic, buttons, zipper, bias tape for finishing edges, chalk.

How to sew a sleeveless knitted dress

Even a beginner with zero experience can sew such a dress. You will need 2.5-3.5 meters of knitwear (depending on the length of the dress and your height) and your favorite T-shirt for the pattern. The sewing process itself will take you a couple of hours, but as a result you will get not only an outfit for a festive dinner, but also a dress for every day.

The video shows the pattern of cutting and sewing in detail.

If your level of mastery of the material and sewing machine reaches the “master” level, then you can safely transform the proposed lesson and complicate the dress model. For example, add sleeves or transparent inserts along the bottom of the skirt and in the neckline. Choose a more complex fabric or use multiple layers.

How to sew a floor-length dress with a peplum

This lesson offers very detailed and clear instructions. with a peplum and a beautiful cutout on the back (although it’s not really a dress, more like a suit), it turns out that you can sew it in just four hours. Every girl's dream.

The cut of this dress is not as simple as in the previous tutorial. But if you take dense, high-quality fabric that does not fray or stretch like knitwear, everything should work out for you.

The first video will help you take measurements correctly and accurately create a pattern for your dress. The author of the video also explains how to lay out the pattern on the fabric. If you want to slightly modify the silhouette of the dress, with these instructions it will be very easy to do so.

The second part of the video shows the sewing process from start to finish. Starting with how to correctly connect the elements, ending with processing the edge and neckline with bias tape.

Outfits that are easy to make based on this dress. Add decorative metallic elements, change the shape of the skirt or the model of the top. The choice of color is also up to you: the best option this year is, of course, red.

How to sew a stylish dress with one seam

If you don’t have time at all, then try sewing a dress like this, with just one seam. You will need three meters of flowing fabric (silk, chiffon, crepe, satin and others). If the fabric doesn't seem too festive to you, try lace, a shiny texture, or even a fabric with sequins. The sewing process itself will not take more than an hour, unlike shopping.

Outfits that are easy to make based on this dress. For those who know how to cut on their own, I offer a few more simple models that can be sewn in just an evening.