How to paint with powder on nails. How to strengthen nails with acrylic powder? Sophisticated nail design with sand

Olya Likhacheva

Beauty is like a precious stone: the simpler it is, the more precious it is:)

Content

The once popular extension has gone out of fashion, replaced by a trend for natural nails coated with gel polish. However, not all girls can boast of an ideal nail plate, so the procedure for modeling it has not completely lost demand. Beauty salons offer manicures with acrylic powder, but who is this suitable for?

What is acrylic nail powder for?

This polymer material belongs to the group of acrylates and is used in modern extension procedures as one of the components of the modeling mixture. When combined with a special liquid (monomer), it forms a dense mass that hardens in air. Unlike gels, acrylic does not require a lead lamp.

The product has 3 main purposes:

• crack repair;
• plate modeling;
• volumetric design.

Acrylic powder for strengthening nails and for extensions is the same product, but for the purpose of repair, a transparent version is often used. For full extensions, you need camouflages: a flesh-pink powder that completely covers the nail plate, but matches its natural color down to the nuances of the undertone. This step is taken to adjust the length of the bed. The same can be done with biogel, but it will have to be dried through a lamp.

Manicure powder provides the following benefits:

• A bonding layer is created between the nail and the decorative coating (varnish, gel polish), which helps to increase its wearing life.
• Nails become strong and dense.
• Microcracks are filled, due to which the surface is leveled.

How to use acrylic powder to strengthen nails

The method of work is chosen based on the task at hand. If you look at the lessons that tell you how to strengthen your nails with acrylic powder, you will see that camouflage material is mainly used here. When subsequently applying gel polish, you can take any colored powder, and for repairs they often use transparent powder. There is also more than one means of converting a bulk product into a plastic mass:

• Monomer. A liquid with a pronounced aroma, used for extensions. Holds powder as tightly as possible.
• Glue. Comes in kits offering at-home nail repairs with acrylic powder. The aroma is less pungent, the cost of the product and the volume of the bottle are lower, but the plate cannot be modeled.

How to strengthen your nails with acrylic powder under gel polish

Initially, you need to purchase not only the products discussed above, but also a degreaser, which is often a regular liquid for removing varnish, a bonder - a product that promotes adhesion, and a topcoat, which can easily be replaced with biogel. Tools: brush with bristle (no. 6 or 8 are optimal), file (120 and 180 grit), buff. If nails are strengthened with acrylic powder under gel polish, the cuticle cannot be cut. Masters advise you to familiarize yourself with detailed lessons before experimenting on your own.

Technology for preparing to work with acrylic:

1. Trim the length with a coarse file, leaving a free edge.
2. Remove shine with a soft file (180 grit).
3. The plate is degreased with any chosen means and dried.

How to apply acrylic powder on nails? If you plan only to create an intermediate film for repair or strengthening:

1. The monomer or glue is spread over the plate with a synthetic brush.
2. The nail is immediately dipped into a jar of transparent acrylic powder, removed, and dried.
3. Excess particles are shaken off the skin with a fan brush.
4. When strengthening nails with acrylic powder under gel polish, the coating is applied immediately, but when working with regular polish, you will need an additional layer of gel as a base.

If you intend to adjust the shape or length in addition to strengthening, follow these steps:

1. Pour the monomer into a small glass (sold in stores for manicurists, price around 50 rubles), dip the brush into it, squeeze on the side.
2. Use the tip to scoop up powder, forming a ball, and place it on the plate.
3. Level, creating an apex (highest point).
4. Smooth with the flat of the brush and dry.

How to remove acrylic coating

Masters warn fashionistas: never try to tear off artificial material. Biogel has to be filed down; for acrylic, there is a special liquid in which you need to immerse your nails for a quarter of an hour (the time depends on the thickness of the layer), and then scrape them off with a stick. If you cannot find such a remedy, cut off the acrylic coating with a 100/120 grit file, but do it carefully, otherwise there is a risk of damaging the original plate.

Prices

In beauty salons and private craftsmen, the procedure is carried out at a budget price - slightly more expensive than shellac: 1000-1400 rubles. Doing it yourself will cost less, although the one-time investment will be significant: the price of a jar of powder from well-known American manufacturers is 450 rubles. for 21 g, the price of the monomer is much higher - 900 rubles. for 118 ml. Repair kits – 1100 rub.

Video

After reviewing the videos from professionals offered in this block, you will be able to decide how to strengthen your nails under gel polish - acrylic or biogel, and how to properly prepare for this procedure. The masters will tell you how to achieve a neat and durable manicure, whether it is possible to apply regular varnish on an acrylic coating, and explain how to avoid the main mistakes women make when wearing artificial material and how to remove it.

Acrylic powder has been used in nail design relatively recently and came to this area from the field of dentistry. Manicurists have successfully adapted it to their needs and now it is one of the most commonly used materials in nail design and extension; it is widely used to apply it over shellac to further strengthen the coating. Since applying acrylic powder to gel polish is extremely simple, this can be done at home if you have a UV lamp., because classic shellac hardens exclusively under the influence of ultraviolet rays.

Acrylic powder and its types

Applying powder to your nails helps strengthen them. In the assortment of nail design stores you can find many varieties of this powder. Acrylic powder is:

• Transparent and white (classic options used for extending and strengthening nails, often used for French manicure and sculpting).
• Colored (widely used in nail design, used both to cover the entire nail as a whole and its individual sections).
• Camouflage (known for having a denser structure and a natural, but opaque shade, used for smoothing and eliminating defects in the nail plate).
• Neon (with its help it is easy to create a spectacular manicure, shimmers beautifully in the ultraviolet light of nightclubs, as a rule, is used for sculpting or highlighting individual nails).
• Shiny (indispensable for holiday nail art, but depending on the degree of brightness and size of the sparkles, it can also be used in everyday manicure).

Choose acrylic powder from leading manufacturers so as not to doubt the quality and durability of the coating.

How to apply powder on gel polish?

The procedure is extremely simple and in general is no different from applying regular glitter. The preparatory work is the same as for any manicure.

1. Hygienic procedure (removing cuticles with a remover or tweezers, filing nails and giving them shape).
2. The nail plates are prepared for the application of gel polish. Their surface is lightly filed to remove the glossy layer and improve the adhesion of shellac.
3. Nails are degreased with a special product; if it is not available, then with ordinary alcohol. Allow to dry.
4. Apply the base (depending on the brand, the product may require drying in a UV lamp for 1-2 minutes, so read the instructions on the bottle). If UV drying is not needed, simply let the base air dry for 3-5 minutes.
5. Applying gel polish. Cover your nails with shellac as usual, paying attention not only to the plate, but also to the outer edge, as if “sealing” it with a brush.
6. Sprinkle the still damp (no need to dry in a lamp yet) layer of gel polish with powder. If you decide to powder your entire nail, first dip the edge of the nail into a jar of powder to seal it, then, with your finger over the nail pad, use a spatula to dust in the powder until all areas are covered. Shake off excess by tapping on finger. Dry in a UV lamp for 2 minutes.
7. Use a brush to lightly smooth the finish and remove loose dust particles.
8. Cover with a finishing layer if you want to remove the roughness of the coating, or leave it as is.
9. The coating is ready!

Acrylic powder is always applied to the last layer of gel polish. That is, if you are used to covering your nails with shellac for 2-3 layers, but you should sprinkle the very last one. The previous ones are applied as usual and dried in a lamp.

How to apply acrylic powder on nails

You can apply powder to your nails without gel polish. To do this, use regular nail polish.

1. Treat your nails and degrease.
2. Apply base.
3. Cover your nails with clear or colored polish.
4. While the polish is still wet, immediately sprinkle your nails with powder. Apply one finger at a time as the coating dries quickly.
5. Dry. Shake off excess powder.
6. Seal with a clear topcoat or leave as is.

You can also apply powder to gel polish in a different way by simply mixing it with it. To do this, drop a few drops of shellac into the lid (try to calculate the amount that will be enough for the entire job), add acrylic powder. Mix with a separate brush and apply to the nails like regular shellac, having previously sanded and degreased the surface, as in the first option. Cure in a lamp for 2 minutes, secure with finish.

How to make a drawing with acrylic powder on gel polish?

Having learned a simple application technology, where the entire nail is covered with powder, you will very quickly want to try something more interesting and complex. Drawings with acrylic powder– an excellent choice for the next step towards mastery. Moreover, making them is very simple.

Step by step process:

1. 1. Hygienic manicure. Removing the glossy layer from the nail, degreasing - everything as usual.
   2. Apply base. Dry.
   3. Cover your nails with shellac and dry the gel polish in a lamp for 2 minutes. If you want intense color and a more durable coating, apply not one, but two or three layers of shellac, curing each of them under UV rays.
   4. Now start drawing. Take shellac (can be different, or the same as the main one) and draw lines with a thin brush. It’s better to start with simple patterns, or you can use special stencils.
   5. When the design is ready, bring your finger to the jar and gently sprinkle the powder over the design with a spatula. Gently shake off excess without touching the surface. Cure in a UV lamp for 120 seconds.

Helpful tip: before applying acrylic powder to gel polish or nails, place a plate so that excess does not fall on the table. This will make it easier for you to clean your workspace.

Acrylic powder in nail design: examples of manicure

White powder looks very beautiful on brightly colored nails. A wide variety of patterns can be drawn. If you don't know how to use a brush and create designs by hand, use stencils that you can buy at a store that sells nail art supplies. For example, it is easiest to draw uniform scales or diamonds using a ready-made template.

If you don't want your manicure to look tacky, highlight only one nail on each hand with powder. Most often this is done by the ring fingers. You can also add rhinestones to make the design even more original. Experiment with colors, shapes, patterns and textures of your manicure to find your own unique style.

Do you want your nails to be smooth, beautiful and of good length? Strengthening your nails with acrylic powder will help make the nail plate stronger, hide uneven spots and give your nails a great look. Thanks to its plasticity, nail extensions using acrylic powder are becoming a popular activity that more and more specialists are resorting to.

What is acrylic powder used for?

Acrylic powder is a powder with small particles related to polymer materials. After contact with the monomer substance, the acrylic powder hardens, forming a durable protective coating.

The first use of this material was noticed in dentistry. Later, the manicure guru decided to try the powder while doing nail extensions. Acrylic has strength and ductility; the hardened substance is elastic and does not require special care.

The powder is used to:

• strengthen nails with gel polish;
• improve the condition of natural nails;
• create a design;
• fill microcracks;
• quickly correct a broken area of ​​the nail plate;
• increase the length of the nail.

Using powder for gel polish

The gel has gained its popularity due to its durability; even with constant contact with water, the coating lasts a long time. A manicure made using gel lasts on the nails for more than two weeks without fading or losing their original shine.

Due to the characteristics of the body, chronic diseases and the structure of the nail plate, for some girls, the manicure deteriorates after a couple of days. To increase the wear time of a beautiful design and give strength to the nail plate, experts advise strengthening the nails with acrylic powder before using gel polish.

Home Strengthening Tools

• nail scissors;
• cuticle softening liquid;
• container with warm water;
• manicure brush;
• manicure spatula;
• base coat;
• file;
• antibacterial agent;
• colorless powder;
• monomer;
• primer or primer;
• brush for applying acrylic;
• finishing coating;
• Ultraviolet lamp.

Step-by-step preparation

• Remove any remaining varnish;
• Wash your hands with soap;
• Get a manicure;
• Treat the nail plates with alcohol or hydrogen peroxide;
• Apply a soft buff to remove excess shine;
• Degrease the top layer of the nail using a special liquid.

It is better to do a manicure without cutting, so as not to injure the skin. In case of trimmed manicure, wait 24 hours before applying the material to the nails.

Step-by-step instructions for applying polymer powder

1. After manicure and degreasing, apply primer to your nails. For sensitive skin there is an acid-free one.
2. Wait a few minutes until the primer is completely dry.
3. Cover with base gel.
4. Next, using a special brush, pour acrylic powder or dip your nail into it. The more powder, the stronger the nail will be.
5. Hold your nails for 2-3 minutes under an ultraviolet lamp.
6. Remove any remaining material using a special brush.
7. Using a nail file and buff, correct your nails.
8. Apply the selected shade of gel polish.
9. Dry the coating using a UV lamp.
10. Apply the finishing coat, dry the layer using a lamp.
11. Remove sticky layer.
12. Apply emollient oil to the skin around the nail.

Video instruction

In the video you can watch the process of applying acrylic powder.

Strengthening natural nails

Acrylic powder is used under gel polish, creates decorative patterns, and gives durability to natural nails. The process of strengthening your own nails is similar to using acrylic for gel polish, but the final moments are different. Strengthening nails with acrylic powder begins with preparing the nail plate; you should follow the first three steps from the above step-by-step instructions. Next, dip the brush into liquid liquid and sprinkle it with powder. Wait a little time for the two materials to react.

Stepping back one millimeter from the cuticle, apply the resulting mixture to the nail plate. Distribute the material in a thin layer over the entire surface and dry under ultraviolet light. After hardening, level the surface of the nail, smooth out any unevenness and secure with regular varnish or use shellac to add shine and longer wear. After applying shellac, dry your nails under a UV lamp. Nails will look natural when using colorless powder.

Types of acrylic powder

Strengthening nails with acrylic powder will only be beneficial if used correctly, following safety precautions and choosing the right material.

A good acrylic powder should have a porous structure, completely cover the nail plate, not spread or crystallize, and at the same time be plastic and easy to sculpt.

Special series - capable of reacting not only with odorless monomer, but also with ultraviolet curing substances. The powder has good plasticity, making it easy for beginners to work with. The special series is easy to apply to the nail plate, does not spread, and is excellent for the base layer and creating a natural finish.

There are three shades:

• Special White – bright white powder;
• Special Pink – pale pink shade;
• Special Clear - transparent powder.

Camouflage powders - designed to eliminate unevenness of the nail plate. There are several items on sale:

1. Cover Pink is an opaque pink powder that optimally lengthens the nail.
2. Beige – has a dark beige color that goes well with natural shades.
3. Light Pink is a translucent powder with a cool tint that becomes pink-beige during interaction with the monomer.
4. Ice Pink is a translucent powder with a matte finish. In most cases it is used under gel.

Stained glass powders are used to build up “crystal” nails and create a “candy” effect. They are widely used by specialists to create a unique design. To create a beautiful applique or make a unique design, use colored powders.

They are divided into several types:

• bright colors are used for sculpting and creating unique;
• mother-of-pearl - created to create a shimmering French manicure;
• glitter powder - necessary for tinting the nail plate and creating a good mood;
• with glitter – used to create a multi-holographic effect;
• neon - reflective powders, especially loved by young girls, glow under ultraviolet light.

How to extend nails with acrylic powder

Nail extensions using polymer powder provide the opportunity to walk longer with a beautiful manicure and prolong the life of artificial nails. Nails look natural, as there is no thickening of the nail plate, as when using gel.

For extension you will need:

• primer;
• degreaser;
• transparent or camouflage powder;
• liquid;
• extension forms;
• tassels;
• sanding file – 180 grit;
• buff.

Step-by-step instructions for acrylic nail extensions

1. Wash your hands and remove the remnants of the previous manicure.
2. Push back the cuticle using a nail file.
3. Remove the shine with a nail file and make the plate rougher.
4. Take the form and put it on your finger, position it exactly relative to your finger. To secure it, you need to press it tightly to the nail, connecting the ends.
5. Using a straw, crimp the paper form.
6. Apply a dehydrator to prepare and remove excess moisture.
7. Apply primer, preferably acid-free.
8. Dip the brush into the liquid and lightly walk over the nail plate.
9. With the same brush, using circular movements, pick up powder.
10. Distribute the resulting ball on the nail using a brush.
11. The powder should be distributed from top to bottom.
12. At the base of the nail there should be a thinner layer than at the edge of the form.
13. Crimp the edges of the nail using tweezers, giving it a natural bend.
14. File the edges and end of the resulting nail.
15. Lubricate cuticles with oil.
16. Apply clear varnish.

Nail design

Acrylic powder is widely used for sculpting; you can create three-dimensional shapes on your nails, give the design a convexity, the effect of sugar or velvet sand. Not everyone can do sculpting, but creating the “sugar” effect doesn’t require much effort.

Apply a thin layer of acrylic powder with glitter onto the gel polish using a brush and spread evenly over the surface of the nail. Let it dry. Depending on the size of the grains of sand, you can thus give your nails a “sugar” or “velvet” effect.

To give your nails a matte tint, you need to purchase matte powder. Follow all the steps of applying gel polish sequentially, then apply powder to the nail using a brush. After uniform distribution, dry under a UV lamp.

To create a three-dimensional pattern without modeling, you should perform a number of steps:

1. prepare the nail plate, do a manicure and push back the cuticle;
2. treat each nail with an antiseptic;
3. degrease the nail plate;
4. carefully remove shine from nails using a sanding file;
5. apply a layer of primer;
6. let dry for a few minutes;
7. apply base gel;
8. dry under an ultraviolet lamp;
9. apply the desired color of gel polish;
10. dry;
11. remove the sticky layer;
12. apply a second coat of varnish;
13. dry;
14. remove the sticky residue again;
15. using a brush, draw the desired pattern;
16. dry;
17. without removing the sticky layer, cover with acrylic powder;
18. dry under a UV lamp;
19. remove the remaining powder with a brush.

How to remove acrylic powder from nails

If you urgently need to remove the acrylic coating from your nails, but there is no time to visit the salon, the removal procedure can be done at home. To do this you will need to follow a number of simple tips:

• Carefully remove the top coating using a file;
• moisten a cotton pad or swab in a special product designed to remove shellac and gel polish;
• put cotton wool on the nail plate;
• wrap the nail tightly with foil;
• wait 10–15 minutes;
• remove the foil and remove the cotton pad;
• using a pusher, move the exfoliated layer to the edge of the nail plate;
• repeat the wrapping procedure;
• remove acrylic residues using a pusher;
• polish with a buff.

If you do everything correctly, your nails will not be damaged, they will remain strong, without scratches and will not peel off.

Advantages and disadvantages of acrylic powder

Prices

Depending on the artist and the popularity of the salon, the price for strengthening nails with acrylic powder can range from 1000 to 1500 rubles. To save money and give strength to your nails at any convenient time, you can purchase special repair kits. The kit includes all the necessary materials that you can use at home. The cost of the set is 1100 rubles.

The price of one jar of acrylic powder weighing 21 grams varies between 350–450 rubles, the cost of a monomer is 900 rubles. Once you buy several colors of powder and monomer, you can strengthen and design your nails at home for a long time.

From time immemorial, nail care has been the main task of all women. And if in ancient times there were almost no proper tools for this, today the shelves of thousands of stores around the world are teeming with materials for manicure. Millions of artists undergo special training or independently learn the science of nail art.

Gel polish

In the modern world, almost any design can be embodied on nails, and all conditions have been created for this. One of the latest fashion trends can be considered coating nails with gel polishes. Unlike ordinary varnishes, this material lasts 2-3 times longer on the nails, the colors look brighter, and the glossy shine does not disappear after a few days. Many devices and materials have already been created specifically for this type of manicure and its decor. Today we will talk about one of them, namely acrylic powder. We will tell you how to use acrylic nail powder and in what cases it is used.

Strengthening nails with powder

In most cases, acrylic powder is used to design an almost finished manicure. But recently they began to use it to strengthen the nail plate. For this you will need translucent powder. This acrylic sand is only called transparent; in fact, the grains have a white tint. It is often used if for some reason the gel polish does not adhere well to the nail plate, chips or cracks. Then acrylic powder provides good adhesion between several coatings and makes the nail stronger. So, transparent acrylic powder for nails: how to use the material?

Roughen up your nails

First of all, you need to get your nails done or push back your cuticles. We will not describe this stage in detail. Then you need to prepare the nail itself, give it the desired shape and file it. Use fine-grained buffers and file away only the top shiny coating. Try to remove very little, because your goal is only to give the plate roughness, and not to cut it down to the root.

After this, treat the nail with a degreaser. Many beginners skip this stage, considering it not so important. However, even the slightest residue of fatty particles can negate the result of many hours of work. It is not necessary to use expensive means. The most common degreaser, which is sold in specialized nail design stores, will do. If you are doing your own manicure, you can even use undiluted (this is important) alcohol. Pharmacy boric acid will also work. But keep in mind that it does not have properties that are gentle on the nail, like professional degreasers.

Why do you need a primer?

Then comes the primer's turn. In secret, I would like to say that its use in some cases is not necessary - at first you can do without it. However, if we are talking about professional activities, this thing is necessary. The primer additionally dries the nails and makes the surface of the plate even rougher. There is another important function of the primer - it kills microorganisms living on the nail. Under a dense coating, microbes have an incredible opportunity to multiply, which can even lead to diseases. Use this product so that you don’t have to treat your nails for a long time and tediously. On problematic nails, the primer is applied completely, but for healthy nails it is enough to apply the treatment along the edges and along the side ridges.

Base layer

Next, a thin layer of base coat is applied. Here, many novice manicurists make one common mistake - they apply gel polishes, base coat and top coat in a thick layer, mistakenly assuming that this will make the nail stronger. Most often, beginners who are accustomed to coating with regular varnish fall for this trick, where little depended on the thickness of the layer, and in some cases it was even beneficial. After applying the base, acrylic powder can finally come into play to strengthen the nails. How to use the product and how to apply it?

Applying acrylic powder

There is no need to dry the base coat. Immediately after applying it, generously dust each nail with colorless powder using a manicure brush or spatula. Make sure that the particles stick to the entire surface of the nail. It is strictly not recommended to completely immerse the nail in a jar of powder. This way you will ruin most of the material (the grains will simply stick together into a large lump), and the powder itself will lie unevenly on the nail.

A good craftsman always uses materials sparingly. Therefore, when sprinkling powder, hold your nail over a sheet of paper, so that you can then carefully collect the remains and pour them back into the jar. Even if you don’t mind the powder, it will be more convenient to sweep it away so as not to stain everything around.

After covering with powder

Shake off excess powder from your fingers and send your hand to the lamp for polymerization. The drying time should be the same as when polymerizing a simple base layer. After drying, treat the nail with a manicure brush and remove all excess acrylic powder. We figured out how to use acrylic nail powder, but what to do next? If you are not going to cover your nails with colored gel polish, you can simply apply another layer of base and top coat. You will get a beautiful natural manicure. If you still want to cover your nails with color, apply one coat of base and proceed to gel polish. That's all you need to know about colorless powder. But how to use colored acrylic nail powder? After all, with its help you can create a unique manicure design.

Acrylic powder for nail design: how to use?

For this type of nail art you will need colored acrylic powder. On the shelves of modern stores you can find any variety of it, you can choose both color and consistency. A separate type is glitter powder, which expands design possibilities. With the help of colored powder, you can create the most incredible designs or completely cover the nail, creating the effect of a velvet manicure. We will examine these two types of design in more detail. So, how to use acrylic nail powder step by step to create a velvet nail effect:

• Carry out the manipulations described above: cut off the shiny layer, cover the nails with a primer, if necessary, strengthen with colorless powder or immediately apply a base.
• Choose a gel polish color to match the colored powder. You can use a similar shade of varnish. For example, you can choose blue varnish for blue powder, red for pink powder, etc. But in this case, the final color will be richer. Interesting combinations are obtained if you cover your nails with gel polish with a shimmer, for example, silver or gold. You can combine as you like, it depends only on your imagination. Cover your nails with a thin layer of your chosen gel polish and set to dry. If necessary, apply 1-2 more layers.
• Cover the nail with topcoat and generously sprinkle with colored acrylic powder, then go to dry.

Nowadays it is in fashion to highlight the ring finger. So, colored acrylic powder can only be applied to it. An interesting design can be obtained if, after covering with the top, you pinpoint the glitter to the nail plate, and then sprinkle it with powder. How to use acrylic nail powder to create a three-dimensional design? It's also very simple. To do this, apply the design with gel polish or top coat to the coated nail, and then sprinkle with powder. The powder will remain only on the adhesive surface. After this, send the nail to the lamp.

We told you how to use acrylic nail powder. Have beautiful nails and a successful manicure!

A manicure that makes the nail plate stronger and can maintain a neat and new appearance for a long time is the dream of almost every woman. Modern technologies in this area have stepped forward, making it possible to quickly and affordably make a special strengthening coating using acrylic powder.

The material can be used for extensions, or applied to increase the strength of shellac on your natural nails. In the latter case, the manicure will look more natural due to the application of a thinner layer. Read on to learn how to use an acrylic hardener, what materials are needed for the procedure, and what subtleties there are in covering nails.

Features and benefits of acrylic powder

The hardener is a finely ground dry powder based on a polymer, which, when interacting with a special liquid - monomer, makes the nail harder. The powdery composition on the nails looks natural and stylish. The advantages of using it include the following:

• Acrylic powder has a porous, breathable structure, which allows air to flow to the nail plate, which is beneficial for blood circulation.
• The hardened composition provides strong protection, without unsightly bubbles, strengthens them as much as possible, which means the nails will not break or peel. The manicure will not be afraid of frost, ultraviolet rays, or household chemicals during home cleaning.
• A large assortment of colors makes it possible to bring any design you like into reality, or choose a colorless coating.
• It’s easy to work with the material even at home, and it won’t take much time to cover your nails with acrylic.
• Powder can replace extensions, but its layer is not so thick on the nails.
• Correction will be needed only after 2-3 weeks. Removing acrylic is not difficult if you use special tools.

How acrylic works: how does it strengthen nails?

Some girls have naturally weak nails that constantly peel and can break at the first opportunity, but this is not a reason to give up a beautiful, fashionable manicure and grow the desired length. Acrylic powder also provides a long-lasting white or colored finish that allows nail plates to be permanently strengthened, unlike regular polish. With its help, you can extend your nails, or you can do additional extensions, or simply strengthen your manicure. The effect is achieved due to the fact that the powder is mixed with liquid; it fills absolutely all micro cracks on the surface, leveling the texture to a smooth, shiny state.

As a result, you get a neat and stylish manicure that is resistant to mechanical stress and temperature changes. You can calmly do household chores and allow your hands to come into contact with water for a long time when washing dishes or wet cleaning, your manicure will remain intact and unharmed. Nail service specialists recommend applying a special vitamin coating under the powder to provide additional protection.

Are there any disadvantages to acrylic powder?

Before use, many ladies may have a question: is it harmful or not to apply this coating, which strengthens, under gel polish. If everything is clear about the advantages of acrylic technology and its benefits, consider the existing disadvantages:

• If you suffer from various types of fungal diseases, diabetes mellitus, or herpes infection, you should refuse the procedure, as it is contraindicated in this case.
• Acrylic powder does not treat weak, brittle nails, but only creates a protective barrier to prevent damage.
• “Repair” of nails should be carried out no later than 3 weeks, otherwise the condition of your own nail plate will worsen.
• A manicure will cost more than a simple polish, and you will also need to have special devices and an ultraviolet lamp on hand.
• Acrylic has a specific, pungent odor; you will need to ventilate the room and wear a protective mask.
• Strengthening must be carried out in strict sequence, according to these instructions or the lessons in this article.

Also, it is important to consider that low-quality, cheap products can lead to disastrous results, for example, to the appearance of tubercles and uneven layers. Therefore, you need to choose trusted manufacturers; which one is better can be found out from customer reviews. Top brands that are popular include acrylic powder kodi, rio pro, formula pro, runeil, pattern, ezflow, powder, carving, colorful.

What set of tools is needed for the procedure at home?

To strengthen your nails with acrylic powder, you will need a set of special items, which are difficult to do without to achieve the desired result. Get to know them better:

• The components for preparing the modeling composition are acrylic powder and a mixing liquid called monomer.
• Degreaser or manicure remover.
• Solution for disinfection and cuticle removal.
• Files for shaping and polishing nails and buff. You should choose different abrasiveness in order to process from all sides.
• Cups for material and brushes, thin and wide, allow you to apply acrylic, mix and dilute the solution, and remove excess dust.
• Primer for better adhesion of components.
• Transparent and rubber base for gel polish and camouflage pink
• Neon lamp for drying powder and subsequent layers of manicure.

Depending on the intended design, you need to choose the appropriate color of varnish; whether it is better to use biogel or gel depends on your preferences. You also need to purchase a variety of decor, for example, powder for velvet flock or pebbles for a fashionable jacket.

Preparatory stage before starting work

Proper preparation will contribute to the correct distribution of the powder and maximum bonding of the material to the surface. Why do this? In order for the chosen design to be neat and retain its novelty for a long time.

Initially, we remove from the nails the remnants of previous varnishes, old decorative elements, various applied products or vitamin compositions. It is not recommended to cut cuticles right before application; it is better to do this a day or two before to avoid irritation or allergies. Remove the cuticle with a pusher or a special product.

Next, you need to wash your hands with soap and wipe until dry. It is imperative to treat each nail with an antiseptic. If this is not available, use an alternative - hydrogen peroxide or alcohol.

Then you need to trim the length using a rough file, model the shape, leaving the edge free. Using a soft nail file or pad, we remove the shine, file, sand, and degrease. After all the manipulations, we move directly to the strengthening process.

How to make acrylic reinforcement correctly: step-by-step instructions

Strengthening nails with acrylic powder must be done quickly and efficiently, making all movements clearly and carefully, so as not to redo it later. For a general overview of the process, you can watch various videos on how to make gel polish and strengthening step by step and get started.

The step-by-step sequence of strengthening with acrylic powder is as follows:

• Ensure the room is well ventilated or, in warm weather, sit on the balcony. This is done in order to prevent allergies, since the material has a rather pungent, unpleasant odor. You can put a regular medical mask on your face to avoid inhaling the released ingredients.
• Place the tool set in front of you.
• Apply primer to your tidied nails and let it dry.
• Coat each nail plate with monomer. Next, using a pusher, sprinkle generously with acrylic powder, holding your fingers over the jar of acrylic for economy. There is no need to be afraid of the appearance of lumpiness; high-quality material does not give such an effect. To apply gel polish you will need transparent powder.
• Place your nails under a lamp to dry for a couple of minutes. Remove excess powder with a wide brush.
• Polish and sand the surface for a smooth finish.
• Apply gel polish of the desired color and decorate with decor.

You can apply two layers of acrylic for increased durability. This is true for very brittle and weak nails. If you already have application experience, instead of sprinkling, you can dip the brush with monomer directly into the powder and apply a thin layer. To correct the shape and length, pour the monomer into a glass and dip a brush into it. We put acrylic on its tip, then form a ball, place it on the nail and level it, then dry it.

How to remove acrylic coating?

The strengthener needs to be removed after a few weeks. The process is not complicated, unlike its application, so you can do it at home. The actions are performed very carefully and accurately to maintain the beautiful and healthy appearance of your own nails. They are performed in the following sequence:

• Remove a layer of glitter from all nails.
• Apply nail polish remover to cotton pads and apply to each finger.
• Each finger needs to be wrapped in foil and kept for no more than 10 minutes.
• Remove the remaining material using an orange stick.
• We file the shape with a file and thoroughly clean it to the desired result.

• To do a chic, professional manicure at home, you not only need to train a lot, but also listen to the advice and tricks of real experts. It is advisable to include calcium, vitamins A and B, iron and foods rich in calcium in the diet, because the hardener does not treat nails, but only masks the problem of a fragile plate.
• The coating will ensure a long-lasting manicure, but as a precaution, still wear protective gloves for housework, especially laundry, wet cleaning and dishwashing.
• Don't forget to give your hands a gentle massage, use hand moisturizer, and stay hydrated.
• And most importantly, remember that your nails will need periodic rest from the material to prevent their condition from deteriorating. After using acrylic for a long time, take a break and provide the necessary rest from the procedure.

My video on the topic