Socks on two knitting needles without seam. Easy way (Knitting). Women's socks with two knitting needles

Hand-knitted items are always in fashion. They are very durable to wear, and the quality is significantly superior to store-bought ones. Even an inexperienced needlewoman can easily understand how to learn how to knit simple things that are accessible to beginners.

Step-by-step instructions for knitting scarves, socks, and booties for newborns on 2 knitting needles will help you learn new skills and add useful needlework techniques to your creative treasury.

Types of yarn

Depending on the raw material, knitting yarn can be natural or artificial. In the production of natural yarn, animal wool or plant fibers are used - viscose, wool, silk, linen.

Artificial yarn is made from synthetic threads - acetate, polyester, polyvinyl chloride, polyamide, acrylic. In addition, there are various types of blended yarns, using both natural and artificial raw materials.

The most popular wool yarn:

Regular wool– it is spun from sheep’s wool; this yarn is considered the cheapest and most accessible of all natural types. It is coarser than other types of yarn, but at the same time lends itself well to dyeing, including natural dyes. The price is always affordable.
Alpaca- This is llama alpaca wool, which is bred in the mountains of South America. Alpaca has only 22 natural shades from white to black and is not usually dyed. It is very warm, soft and very expensive.
Angora– the fur of the Angora rabbit is soft, fluffy, shiny, and lends itself well to dyeing in a variety of colors. When knitting and wearing, you need to take into account that short angora fibers can “crawl out” from the threads. Therefore, if handled incorrectly, the angora quickly loses its edge. This is a very expensive type of wool.
Mohair– wool of Angora goats. These are long-haired animals with a very beautiful wavy coat. Mohair is a very light, fluffy and unusually warm material for knitting. Mohair fibers are very slippery and long; artificial thread or cotton thread is usually used to secure them. Therefore, mohair is never 100%.

Summer knitting yarn consists of plant fibers. The cheapest and most common is cotton. It is hygroscopic, lightweight, and lends itself well to coloring. Linen is a smooth, even yarn with a characteristic shine, more elastic and heavier than cotton.

In the production of silk yarn, defective silk cocoons, tangled and short fibers are used. After appropriate processing, silk yarn acquires a magnificent appearance, the threads are shiny, even, very tensile and elastic.

There is no pure silk yarn; cotton is usually used as the basis for spinning threads. Products made from silk yarn are easy to wash and do not wrinkle.

Artificial yarn is extremely diverse both in its quality and appearance. Particularly attractive are synthetic threads with various fancy additions - bumps, thickenings, painted in different colors, boucle, long fluffy threads, shiny lurex.

In general, yarn can be twisted from several threads, or it can consist of one. In some types of yarn, the fibers can be laid very tightly and tightly twisted. In others, on the contrary, the thread is lighter and looser. Yarn varies in thickness and length of pile.

Spoke sizes

The sizes of the spokes are determined by their diameter. There are standard spoke numbers from 1 to 10, which correspond to their thickness from 1 mm to 10 mm.

You can determine the size of the knitting needles yourself using improvised means. If you attach a knitting needle to a centimeter ruler, you can measure its diameter by eye and determine the corresponding number.

For knitting thin, smooth yarn, small-diameter knitting needles are chosen. For fluffy yarn such as mohair, use at least number 5 knitting needles.

It all depends on what task the knitter sets for herself. If you plan to create a product with a dense knitting, then even for a thick thread you can take knitting needles one size smaller. When knitting an openwork, loose pattern, thicker knitting needles are used.

Determining which number of knitting needles will suit the selected yarn is easy. The thickness of the thread for normal knitting density should be at least twice as thin as the knitting needle.

Knitting for beginners on 2 needles

How to learn to knit - clear step-by-step instructions for beginners. You first need to master this type of needlework on 2 knitting needles. You should choose medium-sized knitting needles and a smooth thread of appropriate thickness.

Before you start creating a product, you need to master basic knitting techniques. Therefore, first of all, you need to try to knit a sample measuring 10 by 10 centimeters.

This way it will be clear what density the knitted fabric is, how smoothly the loops lie.

Set of loops

The thread should be placed on the left hand, stretched between the index and thumb. Hold it carefully with three others.

The knitting needles need to be folded together, and then insert their ends under the thread from the side of the palm and slightly pull it towards you. The result will be a loop on the thumb. Now you need to insert the ends of both knitting needles inside the resulting loop. Then pick up the thread from your index finger and pull it through.

Release your thumb and tighten the knot formed on the knitting needles. When casting on at the beginning of a row, there are always two loops on the knitting needles at once.

So, repeating these steps, cast on the required number of loops, as indicated in the diagram or by measuring the width of the future product using a centimeter ruler. Upon completion of the set, one needle is carefully pulled out. All resulting loops remain on the left knitting needle. Now you can knit the first row.

Face loop

The free knitting needle that is in your right hand must be inserted into the loop from the front. Hook the thread and pull it onto the right needle. This knitting technique is called classic.

Another technique is to insert the needle into the loop from the back. It's called "grandmother's face." When knitting with knit stitches, you need to make sure that they do not twist in the fabric.

Purl loop

The thread is placed on top of the left knitting needle. Then you need to insert an empty knitting needle under it and push it into the loop. Then pull out the thread, which lies in a new loop on the knitting needle, which is in your right hand.

Yarn over

You just need to throw the thread onto the right knitting needle without knitting. In the next row, the yarn over is knitted as a regular knit or purl yarnover, depending on the pattern or design.

Yarn overs always increase the number of stitches on the needle. Therefore, the knitting fabric becomes wider.

How to complete the product?

They complete the work with a special non-blooming row. The first loop is removed onto a free knitting needle. The second one is simply passed through it, without tying. The entire canvas is processed in the same way. When the last loop is on the knitting needle, the thread needs to be cut with scissors and pulled through it, tightening the knot.

English gum

English elastic is more elastic than regular elastic, so it is used in products that require greater elasticity.

First, you should knit two rows with a regular elastic band, alternating two purl and one front loops along the front side of the product.

In the first row, all the purl stitches are knitted according to the pattern, and the knit stitches are simply removed onto the right needle unknitted. In this case, the working thread is left, without tightening too much, behind the front loop.
The second row is knitted according to the pattern, all knit stitches are knitted, and purl stitches are purled.

Openwork technique

Openwork knitting is always done according to a special pattern. Its peculiarity is that there are small holes in the knitted fabric.

You can make such a hole using a yarn over. At the same time, so that the number of loops on the knitting needles does not increase, the next or previous (before the yarn over) two loops are knitted together with a front or back loop, according to the pattern.

The next row is knitted according to the pattern, including the yarn over; it acts as an independent loop. A hole in the fabric appears where the yarn over was made. It can be done anywhere on the row, regardless of where two stitches are knitted together.

It is imperative to ensure that the number of loops in a row does not increase due to yarn overs.

If you need to make a large hole, then make a double yarn over, wrapping the thread around the right knitting needle twice. In the next row, one turn is knitted around the needle, and the second is simply discarded.

Circuit designations

Patterns are always read from the bottom, the bottom row is knitted first. The designation of even rows goes from right to left, and odd rows on the contrary, from left to right. In some patterns there are no purl rows, odd ones. Because they are knitted according to the pattern.

In one pattern, only one repeat can be presented to create a pattern. This means that it needs to be done several times either along the height of the product or across the width. As a rule, the explanation of the icons is indicated next to the diagram of the picture.

If no explanation is provided:

An empty square means no loop.
Facial - indicated by a small vertical line.
Purl - horizontal line.
Yarn over - usually represented in the diagram by a circle.
The triangle directed to the right side is two loops knitted in front.
Triangle directed to the left side - two knit stitches at the back.
An oblique line passing through several empty squares at once indicates that it is necessary to cross the loops among themselves. The number of loops is the number of squares. The top end of the line indicates the direction of the crossing.

Beginner knitters should avoid using fancy yarn and mohair, as they easily tangle when knitting. To learn how to knit an even fabric, you will have to unravel the knitted section of the product several times and do it again.

This is the only way to develop the necessary skills. It is almost impossible to safely unravel a fabric with tangled mohair fibers.

You should also avoid yarn that consists of several twisted threads. Because it is not always possible to pull out the loop correctly while keeping all the thin threads on the knitting needle.

The result is a tangle that will also be very difficult to dissolve, and it will also look ugly in the product.

You cannot take on a complex drawing or large work. You need to start your creative journey as a knitter with small and very easy-to-make things.

The most suitable option for a person who is just mastering knitting needles is to knit the simplest scarf.

In the process of making it, all the necessary skills will be developed, your fingers will get used to holding the knitting needles correctly, the loops will begin to turn out smooth and neat. The speed will gradually increase.

How to knit a children's scarf

This is the simplest project, a completely inexperienced knitter can handle it. To knit a scarf, it is better to take smooth yarn of medium thickness and select the appropriate knitting needles for it. The width of the scarf should not be too large, 10 cm is enough. Length is optional.

The number of loops cast on depends on the thickness of the thread. You can knit a children's scarf using garter stitch. All rows, both from the front and from the back, are knitted with facial loops.

You can decorate the ends of scarves with fringes. To do this, cut the threads 10 cm long and pull each one through the loop in the outer row. Fold the thread in half and tie it in a knot.

Classic men's scarf

It’s clear how to knit a men’s scarf for beginners. The basis is the previous step-by-step instructions for knitting a children's scarf on 2 knitting needles. You just need to increase its length and width. A classic men's scarf should be at least a meter long.

A scarf is a double-sided product, which means that the design on both the front and back sides should look the same. Therefore, it is best to knit it in garter stitch. The elastic band also looks good. It is performed by alternating two knit stitches and two purl stitches in an even row, and in an odd row it is knitted according to the pattern.

You can also decorate the ends of a man's scarf with fringe.

Snood scarf for beginners

The snood scarf is made both on two separate knitting needles and on circular knitting needles.

You need to knit a rectangle on two separate knitting needles, 50 cm high and a length equal to the circumference of your head or a little more. Then sew its side parts together.

It is most convenient to knit such a product on circular knitting needles. Before knitting the second row, you need to pull out the plastic wire between the loops in the middle. Then close the circle by knitting the last stitch of the first row.

In this case, the entire snood scarf is knitted on the front side, which should be taken into account when creating the pattern.

Knitting socks for beginners

How to knit for beginners step by step on 2 knitting needles - the simplest and most accessible technology. Work begins with 22 stitches to knit the cuff for the back half of the sock. A 1x1 elastic band with a width of 4 cm is knitted. Next, the work is done in stockinette stitch to the same height.

Begin to form the heel, decreasing 2 stitches in each row. In this case, two loops are knitted together in front of the edge loops with an inward slope. After 12 loops remain on the knitting needles, begin to expand the fabric.

Loops are added in each row by 2. New loops are knitted through the edge loops in the previous row. The result should be 22 loops on the knitting needles. The heel is ready, it's time to start making the sole.

How to knit for beginners step by step on 2 knitting needles a simple sock

The length of the sole depends on the size of the foot. For leg size 37 you need to knit 8 cm in stockinette stitch. Next, knit the sock. This stage of work is very similar to the previous one, when the heel was formed. You need to decrease the fabric until there are 12 loops left, and then the expansion begins again.

Now you need to make the top half of the sock. The length of this part is equal to the length of the sole.

The peculiarity is to pick up with knitting needles and knit the edge loops of the sole so that they do not need to be sewn.

Slippers for beginners

How to knit slippers for beginners using the easiest pattern. This step-by-step master class allows you to make slippers on 2 knitting needles very quickly, in a couple of hours.

The pattern for the slipper is a rectangle, one of the corners of which is cut out so that the slipper does not look like a gnome's shoe with a pointed toe. The slippers are sewn together along the sole.

For size thirty-seven, you need to cast on the knitting needles such a number of loops that it will correspond to 44 cm. Next, the fabric is knitted in stocking stitch with a height of 7 cm.

After that, a number of loops corresponding to 3 cm are closed on one edge. This is where the toe of the slipper will be. After which another three centimeters in height is knitted. The blank for the slipper is ready.

Now it needs to be sewn correctly. First we make the sock - the cut out corner is folded in half and stitched.

Accordingly, the triangular part of the finished canvas is bent. We align it along the bottom edge of the side of the rectangle where the tip of the sock was sewn.

From the opposite end, where the heel will be located, towards the toe we bend 17 cm of knitted fabric. The entire slipper is sewn together along the sole with one seam. There remains one more small seam that connects the bow and side.

Turn the slippers right side out. You can put a braid along the edge and the bias seam on the front or beautifully crochet it.

We knit footwear step by step

When knitting leotards, you need to adhere to the following steps:

Poncho for Beginners

How to knit a poncho for beginners with knitting needles, because this product is voluminous. The step-by-step principle of making it on 2 knitting needles is very simple.

You need to knit two large rectangles, each measuring 40x80 cm. You can choose any thickness of yarn and knitting needles, any pattern. Even a simple stockinette stitch is suitable for inexperienced craftswomen.

The main secret is in stitching the two resulting canvases. Each one needs to be folded in half. The shoulders will be in the fold area. Then attach the narrow side of one rectangle to the wide side of the other so that you get a nice angle at the bottom of the poncho, and sew a seam.

We do the same on the other side.

Now you can work on the neckline by casting on loops along the edge. A collar with a large lapel, like a sweater, knitted in the round, would be perfect for this poncho.

Knitted booties for newborns

These booties are designed for a baby's foot length of 8 cm. They are made in garter stitch using needles number 3.

Knitting starts from the part that is above the ankle and wraps around the shin. Then the toe is knitted, after which the middle part is knitted, connecting the sole and the top, then the sole itself and the back of the booties.

Progress:

Cast on 27 loops and knit 12 rows. The last edge in each row is made purl.
The next step is to make holes for the lace. The next 2 rows are knitted in stockinette stitch. Fifteenth row: 2 together, 1 yarn over, at the end of the row - 1 front and edge. The sixteenth row goes all purl.
We knit a sock, divide the fabric into 3 parts of 9 loops. Knit 17 stitches. The eighteenth loop is made purl, after which the product must be turned over. And now only the middle part of 9 loops is knitted separately for 16 rows.
Let's move on to the side part, here you need to lift the loops from the sock fabric. First of all, we do this on the left side. Therefore, we knit the row to the end, and insert the left knitting needle into the edge of the previous row, pull out the thread and purl it. Then we cast on 7 more loops in this way until the end of the fabric. Next comes the left side of the canvas, which is done with knit stitches. We turn the product inside out and do everything according to the drawing. Now we cast on 8 loops with knit stitches along the right edge. After which the remaining loops on the knitting needle are knitted according to the pattern. There are 43 stitches left, which are then knitted in garter stitch for 12 rows.
We make the sole. In this case, only the middle part of 9 loops is knitted with the sides gradually attached. First, knit 25 stitches. Then the 26th loop with the 27th is performed together with the front one. We turn the product over, knit 8, the 9th goes with the 10th and purl together. The work is turned on the face, and the sole is knitted further using the same technique. The loops that are knitted together follow the pattern. At the end of the sole, 9 loops remain.
Then the backdrop is knitted. The edge loops of the remaining parts are connected. After the first row of the backdrop, slip the last stitch onto the knitting needle, which is in your right hand. Then we pick up an additional stitch from the edge stitch, slip the last stitch from the right needle to the left one and knit them together. We turn the product, purl the row to the end. We remove the last unknitted loop onto the right knitting needle, insert the left knitting needle under the edge of the side part. Then drop a loose loop from the right knitting needle to the left one, and purl 2 stitches together. We continue to do this until we come to the place where we need to make holes for the lace. In the next front row, we alternate yarn overs and knit 2 together, while simultaneously lifting the loops on the side parts of the product. Next, we knit according to the pattern until the end of the product, until all the sides are attached to the back of the booties. We close the loops.

This step-by-step pattern for knitting booties on 2 knitting needles for beginners, as experience shows, is universal. On its basis, you can knit booties of different models, adding new details. You just have to show your creative imagination.

You can decorate hand-knitted items using embroidery with multi-colored woolen threads, beads, and braid. Some craftswomen use natural materials - buttons made from pieces of wood, stoppers for ties made from walnut shells, leather straps. Bold imagination allows even inexperienced needlewomen to create impressive, exclusive items.

How to knit for beginners step by step on 2 knitting needles:

Knitting socks on 2 knitting needles:

How to knit booties on 2 knitting needles:

How to knit slips on 2 knitting needles:

We present to your attention a simple way to knit socks on two knitting needles. The socks fit well on the foot and are comfortable to wear. This model of socks has a square (straight) heel. This heel allows you to knit socks for any instep: from low to high. Beginner knitters love to knit socks on two needles, as this method is simple and does not require much experience. Still, if you picked up knitting needles for the first time, we recommend watching knitting lessons for beginners, which show the basics of knitting.

Do you like the post? And would you like to see more descriptions of socks? Let us know! Write about it in the comments!

Loop calculation
To calculate the loops, you will need the following measurements: foot length and foot circumference at the metatarsus. The girth of the foot at the metatarsus can be determined by calculation: it is equal to the length of the foot minus 1 cm for a wide foot or minus 2 cm for a narrow foot.

The number of loops that need to be cast on the knitting needles is equal to the circumference of the foot at the toes, multiplied by the horizontal knitting density, divided by 2 (since first we knit half of the sock). We get: (23 x 2.2):2 = 25.

Progress
We put 25 loops on the knitting needles and knit a cuff of the required width (11 cm) with a 1x1 elastic band.

Next we move on to knitting the heel. We knit the heel using stockinette stitch. The height of the heel is on average 1/4 of the length of the foot. The heel height can also be determined as follows: the number of rows should be equal to the number of loops on the knitting needle minus 2 if the number is even and minus 3 if the number is odd. We get: 25 - 3 = 22 rows. We knit 21 rows in stockinette stitch, and in the 22nd row we begin to knit the heel cup.

Mentally divide the loops by 3. We get 8 - 9 - 8 loops. If there is 1 loop left, attach it to the middle part. If 2 - one at a time to the side parts. Starting from the 22nd row we decrease the loops. We knit 8 loops of the first part, then 8 loops of the second (middle) part, and knit the 9th loop of the second part together with the loop of the third (side) part with a purl loop. We turn the work to the front side. We remove the first loop, knit 8 loops of the middle part, and knit the 9th loop together with the loop of the side part of the front part. We turn the work again, remove the first loop, knit 8 loops of the middle part and knit the 9th loop together with the loop of the side purl part. And so on, we knit only the loops of the middle part, attaching the loops of the side parts, until we have connected them all. There should be 9 loops left on the knitting needle.

Now let's start knitting the middle bottom part of the sock.

After knitting the heel, the number of loops turned out to be more than calculated. Excess loops should be cut. The area where we shorten the loops is called the instep wedge.

Universal instep wedge knitting pattern

3, 5, 7 row: at the end of the row in front of the edge loop we knit 2 loops together with the front one tilted to the left;

4, 6, 8 row: at the end of the row in front of the edge loop we knit 2 loops together purlwise.

Thus, we reduced the loops on the instep wedge, knitting 2 loops together at the end of each row and the estimated number of loops remained on the knitting needle - 25.

Note: if you have a high arch, you can knit 2 additional rows without decreasing in front of two rows with decreases. This will give you more freedom in the arch of your foot. At the same time, the height of the rise can be adjusted: you can knit 2 additional rows only before the first decreases, before the first and second, or before all three.

Knitting pattern for a wedge for a high instep

1st row: raise the loops of the left side from the edge loops (11 loops). You can pick up the edge loops from both walls or from one wall facing the front side.

Row 2: knit with purl stitches. Raise the loops (11 loops) on the right side of the heel.

3, 7, 11 row: facial loops;

4, 8, 12 row: purl loops;

5, 9, 13 row: at the end of the row in front of the edge loop we knit 2 loops together with the front one tilted to the left;

6, 10, 14 row: at the end of the row in front of the edge loop we knit 2 loops together purlwise.

We continue to knit the middle lower part of the sock up to the toe. You can try on a sock and knit to the end of the little toe. It can be determined by calculation: the toe is approximately equal to the length of the heel cup. We subtract from the length of the foot (24) the length of the toe and the length of the cup (5 + 5 = 10), we find that the middle part is 14 cm or 44 rows.

Next we knit the toe. We decrease the loops in the same way as on the instep wedge, knitting 2 loops together in front of the edge loops at the end of each row. When 1/3 of the loops (9) remain on the knitting needle, lift the loops from the edge loops. In front rows we knit a front loop from the edge row, in purl rows we knit a purl one. We pick up the wall of the edge loop facing the wrong side. We do not remove the first loop of the row, as usual, but knit the knit stitch in the front rows and the purl stitch in the purl rows. This first loop should be knitted tighter.

So we add loops until the estimated number of loops (25) remains on the knitting needle.

We also knit the upper middle part of the sock, lifting the loops from the edge loops, but so that the number of loops remains calculated, at the end of each row we decrease the loops in the same way as before, knitting 2 loops together at the end of each row.

Important: the corner loop should be knitted on both walls so that the hole does not turn out to be too large.

On the elastic section we knit the edge loops differently. Now we pick up the wall of the edge loop facing the front side and we will knit the edge loop together with the last loop of the row.

We knit the first loop of the row so that the elastic pattern continues - with a purl loop. We transfer the last loop of the row to the right knitting needle, pick up the edge loop with the left knitting needle and return the last loop of the row to the left knitting needle. We knit 2 loops together in accordance with the elastic pattern: knit or purl. Thus, we reduce the extra loop and the calculated number of loops always remains on the knitting needle. The second sock is knitted in the same way.

The competition for active commentators is in full swing! Read the competition details

If there are only two knitting needles in the house, this is not a reason to be left without knitted socks! Warm, beautiful knitted socks are the best gift for your feet in the cold winter. Until recently, they were knitted using 5 knitting needles, which frightened many needlewomen, and especially those new to this business. But progress boldly moves forward, and now this wonderful product can be created on two knitting needles.

Knitting socks on two knitting needles

The socks are knitted on two needles. I cast on 49 loops on knitting needles No. 3. I knitted 30 rows with an elastic band 1 by 1. I found the middle loop (25th) and marked it with a colored thread. In each front row, 5 stitches were knitted from this loop (knit, yarn over, knit, yarn over, knit). I knitted the purl rows as the knitting looks. When 97 loops were knitted on the knitting needle (this is for size 37), I knitted 6 rows in garter stitch, i.e., all with knit stitches, and began to run the sole on 13 loops (like a heel).

Then I sewed it at the back. That's all! From the comments: Without completing 6 stitches on the knitting needles, I begin to decrease the middle 3 stitches of the sole in each knitting pattern. in a row until only one sole remains, and then I don’t sew it with a needle, but connect it with knitting needles, like a shawl border. Don't forget about the decrease on the sides.

Another technology that appeared not so long ago, it is much easier and faster than the classic method of making homemade socks, and therefore is accessible even to beginners.
Socks with this method come out very neat and comfortable.

Knitting socks on two knitting needles

You will need

yarn in desired colors
2 spokes
centimeter

Progress

In order for the product to fit perfectly on your foot, you need to know exactly your foot size and instep height. Also decide on the height of the sock itself.

The work begins by preparing the back of the cuff. Cast on 22 stitches on both needles. Knit 4 centimeters of elastic, alternating a knit stitch and a purl stitch.

Knit another 4 centimeters in stockinette stitch. That's it, the back of the sock is ready.

Now move on to the heel. To form it, while knitting in each row, decrease the second, third and 2 penultimate loops. Do this until you have 12 stitches left in the row. Next, you need to expand the work, increasing the size of the canvas.

Start the row by knitting the first knit stitch of each row from the edge stitch of the previous one until you again have 22 stitches - this will form the bottom of the heel.

Knit the sole of the product in stockinette stitch for about 8 centimeters (depending on the size of the foot). The back and sole are ready.

Form the toe in the same way as the heel: decrease the stitches to 12, and then increase to the original number. Knit the top of the sock 8 centimeters, in each front row connecting the first and last loops with the edge ones. With this knitting, the sole is connected to the top of the sock and the product takes on a completed look.

Work 4cm of the front instep in stockinette stitch, joining to the back of the sock in the same way as the top to the bottom. Now knit 4 centimeters of the elastic cuff.

Ready! By analogy, knit the second sock.

For those for whom knitting on double-pointed needles (5 double-pointed needles) causes discomfort, to put it mildly, there are ways to knit on two needles. We will demonstrate one of them in this master class. This method is also convenient because you can knit both socks together on the same knitting needles, but from different skeins.

1. First, the upper part of the sock is knitted, usually it is knitted with an elastic band. Then they knit with the main pattern, it can be any pattern - openwork, jacquard, fabric, etc. The length of the upper part of the sock can be any - from a golf sock to a sports sock.

Then, to form the heel, all the loops of the sock are divided in half and only one part is knitted to the height of the heel - from 3 to 7 cm, depending on the size of the foot (photo 1).

2. Next, the heel loops are divided into 3 parts and only the middle part is knitted. In this case, in each row, front and back, one outermost loop on both sides of the middle part is knitted together with the adjacent loop of the side parts (photo 2).

3. When all the loops of the side parts are knitted with the loops of the middle part, on the side edges of the heel, pick up the number of loops that made up the number of loops of the side parts. As a result, the knitting needles will again have the original number of loops (photo 3).

5. 2-3 cm before the end of the sock, to form its toe part, all loops are divided into 4 parts. In each front row, on both sides of each part, decrease 1 stitch until 4 stitches remain on the knitting needles (photo 5).

6. Break the working thread, leaving an end 30-50 cm long. The remaining loops are collected at the end of the thread, pulled tightly and secured, and the sock is sewn with the remaining piece of thread (photo 6).

The knitting pattern for the instep wedge is universal!

3, 5, 7 row: at the end of the row in front of the edge loop we knit 2 loops together with the front one tilted to the left;

4, 6, 8 row: at the end of the row in front of the edge loop we knit 2 loops together purlwise.

Thus, we reduced the loops on the instep wedge, knitting 2 loops together at the end of each row, and the estimated number of loops remained on the knitting needle - 25.

Note: if you have a high arch, you can knit 2 additional rows without decreases before two rows with decreases. This will give you more freedom in the arch of your foot. At the same time, the height of the rise can be adjusted: you can knit 2 additional rows only before the first decreases, before the first and second, or before all three.

Knitting pattern for a wedge for a high instep

1st row: raise the loops of the left side from the edge loops (11 loops). You can pick up the edge loops from both walls or from one wall facing the front side.

Row 2: knit with purl stitches. Raise the loops (11 loops) on the right side of the heel.

3, 7, 11 row: facial loops;

4, 8, 12 row: purl loops;

5, 9, 13 row: at the end of the row in front of the edge loop we knit 2 loops together with the front one tilted to the left;

6, 10, 14 row: at the end of the row in front of the edge loop we knit 2 loops together purlwise.

Next we knit the toe. We decrease the loops in the same way as on the instep wedge, knitting 2 loops together in front of the edge loops at the end of each row. When 1/3 of the loops (9) remain on the knitting needle, lift the loops from the edge loops. In front rows we knit a front loop from the edge row, and in purl rows we knit a purl stitch. We pick up the wall of the edge loop facing the wrong side. We do not remove the first loop of the row, as usual, but knit the knit stitch in the front rows and the purl stitch in the purl rows. This first loop should be knitted tighter.

So we add loops until the estimated number of loops (25) remains on the knitting needle.

Important : the corner loop should be knitted on both walls so that the hole does not turn out to be too large.

On the elastic section we knit the edge loops differently. Now we pick up the wall of the edge loop facing the front side and we will knit the edge loop together with the last loop of the row.