Autumn nail art. Sculpting with acrylic on nails: tips and fresh ideas

Sculpting on nails with acrylic is a fairly common type of nail art.

Typically, acrylic modeling is used to decorate 1-2 fingers on the hand in combination with a jacket or clear varnish.

Using acrylic, you can create flat and voluminous figures: flowers, butterflies, all kinds of curls.

If you are interested in such modeling, video from detailed description provided in this article.

We invite you to explore detailed instructions for creating nail art:

Sculpting on nails, video instruction

With the help of a brush, acrylic is given the desired shape and clear contours. You can do this as on a nail, forming a three-dimensional pattern in front of surprised customers, or creating in advance individual elements on special forms. As for the second case, the master only needs to fix the finished flowers or other elements on the nail using special glue. This method takes less time compared to modeling, but the process loses the charm of creativity. Whatever method you use, you need to learn how to create the main element used in acrylic modeling using the example of a narcissus.
First you need to apply a base on the nail plate using transparent acrylic, and then use a brush to pick up a drop of colored acrylic to create the first petal. It must be formed in the form of a droplet with a sharp tip facing the future middle of the flower. Wait until the drop becomes hazy. Give the ball the shape of a petal. To do this, you need to flatten a droplet, pressing the brush more strongly in the center. In total, you need to create three such petals. Try not to take too much liquid, otherwise sculpting will be difficult.
Put a smaller ball in the middle of the flower, and using a thin brush from the center, start forming the middle. To give depth, you need to take a tiny ball of a brighter yellow color and distribute it in the center of the inner part of the future flower.
To sculpt the leaves under the flower, you need to lay a green ball and stretch it down to the root of the nail until the ball is glossy. Wait until the material dries slightly and proceed with the formation of the ribbed surface of the long sheet. If you are interested in modeling on nails, the video will help you in this procedure. You need to focus on the picture of the daffodil in order to give its leaves a recognizable shape.
After completing the modeling, you need to draw curls with a thin brush, and if you wish, you can stick rhinestones. Then the drawing is applied thin layer acrylic or gel, strengthening the composition.

The constantly developing nail industry presents women with more and more technological innovations. They allow you to create various designs combining classic and avant-garde. One of these innovations was plasticine for manicure. This tool is actively used not only by leading masters nail service but also those women who prefer salon procedures manicure at home.

The execution of such a design can be quite difficult for beginners who are not yet familiar with sculpting technology. If you are just going to master the art of creating volumetric decor elements, this article is for you. We will show you a photo of the work, an accompanying video and write a step-by-step instruction.

What you need for a manicure with plasticine gel for nails

For such painstaking work, you will need not only standard set tools, but also many accessories. However, the resulting result is guaranteed to justify all your costs, volumetric drawings, amazing in their beauty, will look very expensive and elegant on nails. So, you will need:

An ultraviolet lamp or LED lamp is a device for polymerization, without which it is impossible to work with gel polishes or shellacs, as well as, in fact, with plasticine. For a UV lamp, drying should be 2 minutes, for an LED lamp 30 seconds, maximum 60.
Cuticle scissors, if you're going to do it edged manicure. They are also useful for removing excess length of nails.
A nail file with which you will adjust the shape of the nail plate, as well as a buff for polishing.
Brushes for drawing and sculpting.
Degreaser, necessary in order to remove excess dirt, remove sticky layer. In addition, it is useful for wetting the brush so that the plasticine does not dry out.
Dots - a metal rod with a small ball at the end. It is designed to create various decorative elements and, in particular, for working with gel clay.
The gel itself, which comes with a 3D and 4D effect. They differ in the density of the structure, but are otherwise similar, since they equally well perform the function of modeling patterns.
A pusher that is not only useful for working with cuticles, but can also replace dots when working with plasticine gel.
Gel polishes or shellacs: base coat, color coat, as well as a top coat, without which the work done simply cannot hold on.

Technique for performing manicure with plasticine gel for nails

Stage 1. Prepare the nail for work. To do this, remove the cuticle, give the nails the desired shape with a nail file, and adjust the length if necessary. You can remove the cuticle in a classic manner and cut it with scissors, or you can resort to the technique unedged manicure and remove it with special means. In this case, do not forget to use a pusher to remove the softened cuticle from under the side rollers.

Stage 2. Start to cover the nails with the base. The tight fit of the color and decorative elements to nail plate. Polemic nails in the lamp for 2 minutes or 30 seconds, depending on its type.

Stage 3. Cover your nails with colored gel polishes or shellac. It is better to paint in 2 coats for more rich color. Modeling is usually done on a light background, but a dark or even black substrate will look no less impressive. For example, white, gold or pale pink look elegant on a black finish. After that, argue your nails.

Stage 4. Now start creating the decor. You can use thin brushes to make additional patterns that frame the main pattern. Most often these are abstract lines or, if you are sculpting a rose, flower petals.

First, scoop up some gel clay with a pusher and apply it to the nail plate. Take a special brush, soak it in a degreaser (clinser) and begin to form your drawing. If you feel more comfortable, you can do this with dots. When drawing the lines of the pattern, act methodically and carefully. At the end of the modeling, you can decorate the resulting work additional decor. For example, in any picture, rhinestones will look spectacular, always attracting attention.

Step 5. After that, secure the work with a top coat to keep the decor in original form as long as possible. Otherwise, the rhinestones may fall off, and three-dimensional drawing damaged when worn. Polemicize your nails in a lamp.

With the help of this instruction, you will be able to create amazing compositions yourself, each time experimenting with different designs. Surprise your friends in an unusual way decorating, combining already familiar designs with gel clay.

Video on the topic of the article

Sculpting on nails - sophisticated option festive manicure that allows you to decorate your nails with a charming 3D nail. Floral ornaments and three-dimensional patterns look just great on nails, but only a true master can create such beauty. Or not? It turns out that even a beginner can figure out how to sculpt on nails and quickly learn this complex nail art.

Types of modeling on nails

You can create three-dimensional elements in a festive and everyday manicure in one of two ways:

using acrylic molding;
through 3D gel formulations.

Gel is a relatively new trend in manicure, because a gel that has a fairly liquid consistency is not very suitable for such experiments. The development of the nail products market has led to the improvement of gel ingredients, which made it possible to bring modeling on nails to a fundamental level. new level.

However, the popularity of acrylic compositions does not decrease. Even a beginner can handle acrylic modeling on nails, so acrylic is recommended as a base material for creative experiments.

What do you need for acrylic nail art?

Acrylic modeling on nails, although it is considered simple, still requires some creative skills, imagination, patience, scrupulousness in work. In addition, the quality of a nail design is determined by the presence of all the components necessary for sculpting, so you should purchase in advance:

acrylic powder for modeling on nails;
brush;
mixture for degreasing;
colorless varnish;
plastic container;
monomer (liquid).

Before work, the table must be covered with oilcloth, since acrylic that has fallen on the surface and stuck to it will be very, very difficult to remove.

How to make nail art?

Sculpting on nails requires patience and thoroughness. Even preparatory stages you need to do it efficiently and well, because the final result and the strength of the finished manicure depend on it.

Preparatory work nail art include:

Shaping the nail - modeling on the nails looks especially good on long nails, elongated or round shape.
Grinding the nail plate - the smoother the “working” surface is, the higher the quality of the manicure will be.
Cuticle removal - in order not to damage the skin near the nail, it is better to use a special solution and an orange stick to remove the cuticle.
Degreasing - for this, a special solution is useful, which you need to wipe the nail plate of each finger.

After preparing the nails, they are covered with a colorless base or color composition, and sculpting begins directly on top of it. Professionals often prefer to work on the table, and then just transfer finished result on the nail, but for beginners it’s better not to experiment like that.

Directly sculpting on the nails. Requires accuracy in performing each action:

The brush is dipped in acrylic monomer, a liquid that provides hardening acrylic powder- and slightly squeeze it on the edge of the bottle.
Swipe with a wet brush over the acrylic powder so that a ball forms at the tip of the brush.
The ball is placed on the nail plate and wait until it dries slightly and loses its intense glossy sheen.
Start sculpting on nails using a brush, toothpick, aids, allowing you to turn the ball into a three-dimensional 3D element.

To make it easier to figure out how to sculpt on nails, it is recommended to start with elementary volumetric ornaments. These are leaves, twigs, geometric patterns, abstractions.

Often, when working with acrylic, beginners make some mistakes that ultimately destroy all their efforts. If acrylic modeling is performed on nails, then it is strictly not allowed:

Mix shades. When experimenting with color, a decent beautiful result is rarely obtained, usually just a dirty color.
take on complex elements. Modeling requires skills and experience, it is worth to develop them slowly.
Touch the brush with your fingers. If the pile becomes oily, then it will become impossible to work with acrylic.
Sculpt at the edge of the nail. The presence of free space around the element allows you to achieve maximum aesthetics. Moreover, such a 3D ornament is more resistant.

The finished acrylic modeling on the nails is covered with a colorless varnish, which will give the manicure completeness and the durability necessary for such a complex nail.

Sculpting on nails is a complex process, but the result is guaranteed to exceed all expectations with its charm and beauty. Therefore, to figure out how to make modeling on nails is recommended for every fashionable girl!

In the life of every woman sometimes happen especially significant events, the memory of which is stored in the photo and video frames. On such days, girls make every effort to make their image perfect. Certainly very important pretty haircut and a spectacular dress, but no less significant is the manicure of a beautiful lady. For special occasions professionals created a special type of nail art - modeling on nails.

An unusual design is the creation of three-dimensional compositions using acrylic or gel. Manicure looks great both in the photo and in life. Nail art turns out to be very beautiful, but impractical, as volumetric elements cling to clothes and surrounding objects. If the design is created for everyday wear, the surface of the nails with the composition is covered with a special transparent gel, creating an "aquarian" effect, which makes them perfectly smooth. What is the difference between acrylic nail art and gel nail art? Completed compositions are similar. The difference lies only in the features of the compositions and the technology for creating volumetric elements.

If you want to not only stand out, but also make it beautiful, we recommend that you do not overdo it in the number of volumetric elements when creating a design. It is advisable to make out only 1-2 nails, focusing on them. If you decide to decorate all the fingers, choose more gentle mundane compositions, as in the photo. With the right approach, modeling on nails will add sophistication and a touch of mystery to the image.

Gel modeling on nails 2017 photo ideas options for new items

A special 3D gel is used for this type of volumetric modeling, it has recently appeared and has become popular among skilled craftsmen and fastidious customers. Gel sculpting should also not be done on all nails, it is enough to select some nails on both hands. When working with a 3D gel, there are advantages: there is no smell, it is much more plastic than acrylic, the time of “stretching” the element increases (it is convenient when making complex motifs).

Gel sculpting is practically no different from acrylic sculpting, necessary materials: 3D gel, special brush, nail polish remover. One difference - it is necessary to dry each element in the lamp with ultraviolet radiation. This is necessary in order not to get a "blot" of a viscous mass. Mandatory addition by drawing acrylic paints to have a finished look. Any modeling material in the hands of a real professional will turn into a beautiful work of art and make your hands admire!

Acrylic modeling on nails 2017 photo ideas options for new items

A real manicurist can perform jewelry modeling, turning simple nails into a work of art. The nuance of modeling is that it is very difficult to do it on your own, without skills. For acrylic modeling, you need to buy several colors of acrylic powder, a monomer, a special brush and a tool for cleaning it after work. All tools and materials must be of high quality, the strength of the finished design depends on this. The elements of stucco design must be properly distributed over the surface of the nail so that the design does not look tasteless and bulky. Do not place the molding close to the edge of the nail or to the cuticle - it will not hold well. Choose individual fingers for design, the rest can be decorated with a painting that is in harmony with the molding elements, covered with a plain decorative varnish or a jacket.

Performing acrylic molding:

finished nails (formed on lower forms or on tips) must be polished with a buff or a special nail file;
in the place where the modeling will be located, an acrylic ball is applied, from which the design or design element is then removed. All movements must be precise, it depends finished design- the clearer the contours, the more expressive the modeling will be;
the finished design must be “complemented” with small drawings, some accents from nail materials so that the drawing has a finished look;
finished design can be coated transparent coating or leave it in its original form, the coating will protect the design from mechanical damage.

Manicure with three-dimensional flowers 2017 photo ideas fashion options

Volumetric design on nails is one of the most interesting and beautiful nail art solutions. Modeling on the nails is done from acrylic or gel and has several levels of complexity. IN Everyday life 1, maximum 2 nails on the hand are decorated with this design. When doing a solemn manicure, especially a wedding one, you can allow modeling on all nails. Such art will not go unnoticed and will always give the hands more femininity and charm. Diverse flower arrangements and floral ornaments very often adorn ladies' nails, but many women do not even suspect how diverse this design is. Flowers on the nails can look original and creative, emphasizing the female personality.

A nail design that involves the use of a complex floral pattern should always be thoughtful. The girl should find the desired image in advance in order to transfer it to the nail as realistically as possible. By the way, the image does not have to be centered, it can be applied only to the tips or exclusively to the base of the plate near the hole. Only at first glance it seems that working with volumetric colors is very difficult, but in fact there is nothing special about it. The most problematic will be the recreation of the petals themselves. desired shape and size, so before you start decorating real nails, you can practice on artificial ones.

Fashionable ideas for voluminous manicure 2017 photo news

Volumetric manicure is not a decoration for every day. Choosing such a design, I want the theme to be relevant and the nails to look stylish. If such work is done on the wedding day, then everything is more or less clear here: gentle colors and light, perfectly sculpted rose petals or just swirls look very cute. If you just want to please yourself, then you can always choose the actual theme of flowers. Small copies of poppies, roses, irises and peonies look great. Gel three-dimensional design has the appearance of a glass surface and a special shine that is unattainable with acrylic modeling.

Each nail is a work of art, on which outlandish patterns bloom and delicate petals of irises, freesias and orchids are revealed. You can make such drawings in any palette, and then your hands will be almost like a painting by an artist. Imitations of lace fabric, convex abstract images look very good. The main thing is that the theme of the manicure matches your overall style. There are great examples of nail art with bulging hearts, birds, or even mini skulls, but this is more suitable for young girls, and someone will surely like the sea or space theme. Gel talented master can use as you like female soul. Here, a flight of fancy and any interesting ideas are welcome.

Manicure 3 d gel photo 2017 ideas options for new items

In the modern market for manicure products, you can find different kinds products. Thinking about which gel is ideal for your nails, you should give preference to 3d. This remedy is becoming increasingly popular due to its amazing design possibilities. High-quality products will be plastic, which will make it possible to create three-dimensional compositions. The gel should not be viscous, but should be easily separated from the total mass, as this will facilitate the creation of a 3D format drawing. Dense and viscous structure, optimal consistency - this is the most important aspects, guaranteeing the achievement best result at creative work. In any case, the quality of the products used can be judged only after its purchase.

The gel can be designed to perform simple and complex designs, and easy drawing 3d format can be done independently. Complex designs should only be done in cooperation with a professional who has the necessary knowledge and skills. The workflow has numerous nuances and subtleties, but at the same time it is successfully carried out in various techniques. Please note that the gel includes volumetric elements created in a separate order. Be sure to dry in ultraviolet lamp within three to four minutes, since the thickness of the layer plays a decisive role. Understanding the nuances of a creative event will allow you to successfully design any composition.

A special place in the nail industry is occupied by volume modeling on nails. This type of nail decoration is not very practical and is not suitable for everyone. Ornate elements on the nails will not leave a woman without the attention of others, so sculpting on nails is best done before solemn event. Modeling designs look very impressive and their choice is huge. Most often, women prefer to do voluminous flowers or themed patterns in the form of hearts, bows, snowflakes, wedding attributes, etc. it’s just that modeling doesn’t look very good, so it is combined with artistic painting, bouillons, mica, rhinestones and other nail materials.

There are two types of modeling - from gel and from acrylic. Any of these types can decorate both extended nails and natural ones, in the latter case, the nails must be long (sculpting visually shortens the nail). Modern materials for nail extension allows you to combine gel and acrylic, achieving the perfect result. Volumetric modeling elements are well suited for aquarium design, but it is done only on artificial nails.

Modeling material is laid out on the formed nails and a pattern is formed, then it is “sealed” with a transparent gel, you can add foil, broths, rhinestones, mica, lace. This design looks beautiful, easy to adjust (there are designs that can be easily changed without applying special efforts) and wears for a long time. You should not make stucco elements on all nails, just choose one or two nails on one hand.

Acrylic modeling on nails 2017 photo novelty ideas

To create a voluminous manicure using acrylic, you need to purchase special compositions, brushes for modeling. The first thing to do is to prepare the nail plate. Initially, modeling was intended to create a complete image of an extended coating. Today you can experiment with natural nails, which, however, must be sufficiently long. At the same time, it is necessary to have at least a base coat, and even better - a layer of colored varnish.

With a flat brush, grab a ball of acrylic, place it on the nail. Give the droplet the shape of the future decor, but do not sculpt, otherwise it will simply spread. Wait until the ball dries and loses its glossy sheen. Only after this modeling on the nails will become possible. With a brush, model the desired element. Proceed to the next part of the composition.

Gel modeling on nails 2017 photo news ideas options

Gel modeling appeared much later than acrylic. This was due to the liquid consistency of the composition. Today, special 3d modeling gels have been created. Nail design has become more diverse. Thanks to the plastic structure of the gel, you can create incredible compositions. Sculpting on the nails has become more convenient. In addition, unlike acrylic, the gel is odorless, which makes the procedure more pleasant.
Design elements are applied to the prepared nail plate immediately in the form in which they will be fixed. Each part of the composition of a certain color must be polymerized in a UV lamp for 2-3 minutes. With insufficient solidification of design elements, a mixture of tones is possible. To consolidate the acquired knowledge, we propose to look interesting video a lesson from which you will learn how to build and sculpt on nails using a gel composition.

Volumetric nail design 2017 photo ideas options

Nail design, which has a special niche in volume design, is a very popular way to give hands a beautiful and sophisticated look. He entered everyday life relatively recently, and before that, basically this design of the nail surface could be seen on models in various show shows. Then, on each nail of a woman, a separate drawing was depicted. Now in nail art, its simplified version is actively used.

Such a manicure looks very festive and spectacular at weddings, various celebrations and clearly distinguishes a woman from many others. The only thing is that such a design is quite impractical, since it is voluminous and does not always fit the rhythm of everyday life. However, this does not mean that volumetric manicure should be abandoned. You just need to choose such a design for publication and special occasions.

To create a beautiful voluminous manicure, nail art masters first make a special mass, similar in consistency to plasticine, from gel and acrylic powder. With such a mass, you can then either draw various patterns on the nails, or sculpt the most unexpected figures, flowers and details from it for laying out on the nail plate. In the course of work, the master can also use the gel separately, drawing them small parts overall picture. IN voluminous manicure a combination of several modes of operation is also possible. The main picture can become a background, and a color is applied on top of it.

The material used for such a manicure is varied. These are standard sequins, and foil, as well as natural materials which include silk, silk threads, feathers, rhinestones, gems and even dried insects! On short nails it will be better to look at volumetric painting, but for owners of long or extended nails, convex elements in manicure are perfect. It is believed that what longer nail, the more manicure elements can be and the more profitable they look.

Everyday manicure with sculpting 2017 photo ideas ideas

Volumetric nail art, professionally performed, looks amazing. True masters of nail service deftly form relief decorations. Any virtuoso specialist in this field was not born with this talent, but acquired his unique skills through constant training and systematic comprehension of each section of this art. The essence of the ability to create nail art design lies in learning and rich practice. Thus, we came to the conclusion that any person, regardless of the type of activity and age, is able to master this technology. The main thing is to have a desire. If it is not possible to take lessons from a professional, then the Internet will come to the rescue, where there are many photo and video materials that are freely available and fully reveal all the basics of modeling.

A properly designed nail art design will certainly satisfy your desire to effectively stand out from the crowd. To make the decorated hands look natural, you need to create a group of objects that blend harmoniously with each other, merging into an aesthetically pleasing composition. To achieve this goal, you should not use too many volumetric elements. For inexperienced home manicure masters, we recommend allocating only 1-2 nails. This option is ideal for everyday manicure.

Nail design modeling 4 d gel 2017 photo ideas options

It seems that the manufacturers have agreed to simplify nail technology as much as possible. Volumetric modeling has always been classified in salons as an expensive VIP service, but with the advent of free sale of sculptural 4-D gels, some techniques have become available even to self-taught masters. The technique of working with a dense and shape-holding mass is elementary: even a child can handle the design of nails after a little training. At the same time, with the resulting luxurious design, you can safely go to new year party: the furor is guaranteed.

The light-curing polymer feels like hard plasticine or clay to the touch. It sticks a little to the hands, so in the process of work, the entire tool and fingers have to be periodically moistened with a cleaner, that is, a means for removing the sticky layer. You can knead and shape the 4-D gel with your hands, a hard or silicone brush, a plastic stick or dots: a soft brush will not provide enough pressure.