DIY light bulb toys for the New Year: we make New Year decorations from old light bulbs. Christmas decorations made from light bulbs

Old light bulbs can be easily turned into amazing Christmas tree decorations. However, you don’t have to collect burnt out light bulbs to get new New Year’s toys - you can buy new, cheap ones. Their price compared to ready-made Christmas tree decorations is simply microscopic.

Which light bulbs to choose for toys

The shapes and sizes of light bulbs for New Year's toys can be any - depending on what kind of toys you want to make. If you are planning to install a large one in your home for the holidays, feel free to choose large light bulbs. By the way, they provide great opportunities in terms of creating New Year's decorations. Large light bulbs can not only be painted, but also decoupaged and decorated different materials. You can even remove the base and place some interesting things inside the lamp - you will get the most interesting New Year's composition.

But it’s also possible to make a Christmas tree out of small light bulbs original decor. Also, keep in mind that small toys They decorate the Christmas tree very much. Even if the tree is very large, just place them on the branches between large Christmas tree decorations.

Especially interesting crafts and toys are obtained from elongated light bulbs, so-called candle bulbs.

What paints to use for painting light bulbs

In the process of turning light bulbs into, you will need paints for painting. Choose win-win options:

• glass paints;
• paints for glass and ceramics;
• stained glass paints;
• contours for painting.

These paints are easy to paint, they cover the glass surface well, stick tightly to it, do not fade over time and last a long time.

You might want to buy paints for your Christmas decorations. various effects. In addition to countless shades of paints for glass, there are pearlescent paints, metallic, glossy and matte, transparent and opaque.

Using a certain type of such paints, you can obtain a structural surface (rough, “velvet”, etc.). If you want to enhance the effect, use a special sprinkle - buy glitters (sparkles).

Contours are also paints, only thick and non-blurring - they are good for drawing lines separating parts of the drawing and drawing details. They are convenient to use - they are sold in small tubes with thin tips.

How to paint a light bulb

With the decor of light bulbs, everything is exactly the same as with painting of ordinary glass.

Before starting painting, the surface is washed and degreased. To do this, take glass cleaner, alcohol or solvent. They dry quickly, so preparatory stage won't take much time.

The background coloring is subtle, special care should be taken if the paint is clear/translucent.

We are waiting for the background to dry. We draw the drawing with a simple thin pencil.

We paint the sketch with paints of the appropriate color.

While the paint is fresh, sprinkle the selected areas with glitter. You can do it differently: wait for the painting to dry, grease the areas with PVA glue and then sprinkle them with glitter. Remove excess glitter with a brush.

Leave for a day, after which we cover them with acrylic varnish.

I saw it on the internet once New Year's toys made with my own hands from light bulbs) I really liked this idea (because I’m already pretty tired of plastic New Year’s toys) and now, when I still have time to start making such toys, I’m picking up all required material. I suggest you, who are interested in this idea, to join. Moreover, such creations will appeal exclusively to all children, and therefore, for some time computer games will be able to fade into the background.

The closer the New Year holidays come, the more you want to create! And the most rewarding time for making your own New Year’s decorations is now. You can create them from anything, for example, you can make Christmas tree decorations from light bulbs.

Ideally, to do this, take the accumulated burnt out lamps, but if your soul is boiling with inspiration, and your hands demand to create, then you can use new ones, which have been waiting for their bright hour in the pantry for many months. So what kind? Christmas decorations Is it possible to make something out of this ordinary and already useless thing in everyday life?

Cute and good-natured snowmen made from light bulbs.

Having been inspired to make toys from light bulbs with your own hands, the first thought or idea that comes to mind is snowmen. On a primed light bulb, painted in White color, easy to draw funny face, a carrot nose is easily made from salted dough, and for true hand-made craftswomen there is the opportunity to make noses for snowmen from fimo or cold porcelain. The lamp base is perfectly decorated with a cute fabric cap. Well, you can also add stick hands by gluing them on a universal glue gel or with a glue gun. There is a huge field for imagination here.

That's all - wonderful snowmen in such funny New Year's caps will happily decorate your christmas tree! And they will also be paired with fairy-tale grandfathers, penguins and others New Year characters. Cute little animals and characters from your favorite fairy tales

Since drawing faces on light bulbs is so much fun, why not add more characters to your Christmas tree branches? Wonderful and very cute New Year's toys made from light bulbs - these are all kinds of little animals! Such an adorable pair of bunnies will look very cute! You can also provide the bunnies with New Year's caps, such as in this photo.

But besides bunnies, there are many other animals that we strongly associate with the New Year holidays. Which of them can come to mind? For example, a deer. Yes, yes, if you want, you can make funny deer out of a burnt out light bulb! And also New Year– the holiday is cold and snowy, which means curious penguins on the Christmas tree will be very welcome!

After the light bulbs are primed and you have a palette of colors in front of you, more and more new ideas come to mind. What other toys can you make from light bulbs for the New Year with your own hands? The sophistication of decoupage in creating toys from light bulbs

In addition to quite childish crafts that are distinguished by their enviable spontaneity, you might wonder how to make a toy from a light bulb into a more sophisticated style. A technique like this is amazing for this. IN Lately This type of hobby has become very popular, as it allows you to create very beautiful things without any special artistic skills. Therefore, prime the light bulbs, select napkins with New Year theme and create an elegant masterpiece for the New Year for your Christmas tree.

The lightness of balloons.

If in the coming year the only thing you really want to get from Santa Claus is a trip to somewhere far away and warmer, or even better - several trips a year, then the Christmas tree will need to be decorated... That's right! Balloons!

You can create an elegant, lace openwork by choosing to work multi-colored threads. Smooth silk threads will create a classic lace design and will make the products more sophisticated.

Simple and tasteful

Well, if you want to get maximum effect, spending minimal effort - you can go the most in a simple way. Having painted the light bulbs different colors, they can be sprinkled with dry glitter on an adhesive base, or you can use ready-made glitter for decoration in a tube. You can make the toys either completely shiny or alternate matte and shiny stripes.

These toys made from old unwanted light bulbs will look very impressive! Especially if they are decorated with shiny rhinestones!

For free artists.

Well, for those who confidently hold a brush in their hands, and a supply of paints at home is a must, you can paint light bulbs with wonderful patterns, turning them into real works of art. You can use clear ornaments or a noble floral design, or you can go avant-garde - in any case the result will be impressive.

The options can be very diverse. Can be used salty dough, cute caps and hats made of fabric, structural paste to create icicles and three-dimensional relief, coloring and decorating with sparkles and beads, and perhaps tie a light bulb to the base beautiful bow. Choose the option that best suits your idea!

If you have old, burnt-out light bulbs lying around at home, do not rush to throw them away. It’s better to make New Year’s toys out of them, with which you can decorate the green beauty and give yourself a festive mood

In addition, children will definitely take part in such an interesting and entertaining event, because they are always where the miracle happens. Isn't this small miracle- reincarnation old light bulb into a sparkling New Year's toy.

What is necessary

To make a New Year's toy from a light bulb you will need following materials and tools:

Burnt out light bulb;
- a means for degreasing surfaces (alcohol, glass cleaner or liquid for removing the fatty layer from nails);
- primer for decoupage;
- foam sponge;
- glue for decoupage;
- large synthetic brush;
- medium brush with soft bristles;
- scissors;
- decorative contour for bronze-colored ceramics;
- glue gun;
- decoupage card with New Year or Christmas motifs;
- thin hemp rope;
- bronze glitter.

How to make a New Year's toy from a light bulb

1. Before you start decorating the light bulb, you need to degrease the glass surface for better adhesion to the primer. Take cotton pad and moisten it with grease film remover, wipe the light bulb. When the light bulb is dry, cover it with a layer of decoupage primer.

2. While the soil is drying, cut out the elements you like from a decoupage card or napkin

3. If you are using a napkin, remove the bottom two layers of paper. If you have a decoupage card, then the paper needs to be made thinner. To do this, turn the elements over, moisten them with water and, using the hard part of the sponge, carefully wipe off the underside of the motifs (the excess thickness of the paper will roll up and be easy to remove)

4. Now you can coat the light bulb with a second layer of primer and create a uniform texture for subsequent decoration. Using a small piece of sponge, which needs to be dipped into the soil, cover the entire surface of the light bulb with short, frequent movements. To make it convenient to dry the product, you can tie a piece of string to the light bulb socket and hang it from it while drying.

5. After drying again, you can begin to decorate the light bulb with prepared motifs. First decide where exactly they will be located. Then lubricate wrong side cut out element and glue it into Right place. Using a damp soft brush, level the surface of the paper so that the motif fits tightly to the primed surface.

6. Glue the remaining two motifs in the same way.

7. Having dried the product well, we proceed to further decoration. Take the ceramic outline and squeeze a small amount onto the palette. Dip a piece of foam into the bronze outline and make a few test strokes on the palette to remove excess paint. And only now start covering the light bulb with bronze.

8. So cover the entire surface of the future New Year's light bulb toy, carefully process the edges of the motifs

9. Dry the decorative layer and cover the entire toy with a glossy clear varnish water based

10. When the varnish is dry, use a brush to apply a little varnish around New Year's motives and apply bronze glitter with a brush

11. It remains to hide the socket from the light bulb. Turn on the glue gun, when it is hot, apply glue to the top of the cartridge and glue a loop of thin twine

12. Gradually apply hot glue and wrap the light bulb with rope until top part the light bulb will not hide under the hemp

Now our New Year's light bulb toy is ready. You can decorate a Christmas tree with it or make it part of a decorative composition

our newsletter Site materials once a week

Pending New Year's holidays It's worth doing some handicrafts. This will help lift your spirits and give you the opportunity to decorate your home. Some people make Christmas wreaths, others cut out snowflakes, sew or knit a symbol of the coming year. We suggest making a Christmas tree toy with your own hands. Since we are accustomed to such products being made of glass, we will not deviate from the rules. Let's take a burnt-out incandescent lamp as a basis. We have already used it for its intended purpose, now it’s time to give it a second - a new and no less interesting, but more durable life.

To create a Christmas tree decoration from a light bulb you will need: a light bulb, two 15 cm pieces of red satin thin tape, scissors, lighter, white acrylic paint, PVA glue, napkins with a suitable “winter” pattern, brush, water, acrylic varnish in spray, acrylic paints, a set of multi-colored sparkle glitters and a piece of red crepe paper.

It’s not difficult to make a Christmas tree toy from a light bulb, but the process will take time, since you will need to wait until the paint and glue dry.

So let's get started, take a light bulb. We tie one end of the red ribbon around the base.

We will pass the second tip under the resulting girth, which will not turn out to be very tight, since there is a thread on the base. You can help with a knife.

Now we tie a tight knot to hold the tip. Our product can be hung by a ribbon.

It's good if you have a matte incandescent lamp. But most often we use transparent ones, so we have to paint the glass with white acrylic paint in one layer. You can add 50% PVA glue to it to make it stick better.

Cover the entire surface of the lamp and hang it to dry. Depending on the thickness of the layer, it may take from half an hour to several hours. We wait until the paint dries well. At this time, we will work on the future pattern of the toy. Take a napkin. We cut out fragments from it, trying it on a light bulb. It should be covered around the circumference with a pattern. We needed two identical fragments.

Carefully tear off the evenly cut edge, leaving it uneven so that the joints of the drawings are not visible on the toy. Separate the two white layers of the napkin.

The paint on the light bulb has dried.

We make a solution for decoupage - dilute PVA glue and water in half. We apply the fragment to the glass, outlining its future location.

Using a brush dipped in decoupage solution, glue the fragment to the light bulb. We coat carefully, quickly, from the center of the pattern to the edges. Remember that a soaked napkin will greatly stretch and deform. Slowly correct the folds if they appear during gluing.

We join the drawings of both fragments, glue all the planned elements and let the glue dry.

We take acrylic paints and glitters. We select a red color that suits the tone and paint over the surface of the light bulb above the fragment of the napkin, continuing the drawing.

We do the same with the blue area at the bottom of the pattern. We do not leave white places on the toy. It should be covered either with a fragment of a napkin or with acrylic colored paint.

Now let the paint dry. This may also take several hours. We will only decorate a completely dry surface! Let's take a set of glitters and start doing magic. We apply silver sparkles to the snow-covered roofs of houses.

We outline the snowdrifts located in the background with blue glitter.

We go over the red background with red.

We draw in blue the contours of the snowdrifts in which there are houses, trees and fir trees.

With green we add volume to the Christmas trees, highlighting the tiers on their surface.

When you are completely satisfied with the decoration, leave the toy to dry. The glitter gel will evaporate, and the sparkles will remain on the surface of the toy. Now the light bulb can be varnished. We took acrylic lacquer in a spray that is suitable for any surface and dries quickly. We leave the room on the staircase, balcony or street and spray varnish on the toy from a distance of 30 cm, turning it so that the coating is even. We hang the product, placing a newspaper under it, and let it dry. After this, you can decorate the toy. We will need a second piece of tape and corrugated paper that is twice the width and height of the light bulb. The edges of the ribbon should be cut evenly with scissors and set on fire with a lighter so that they do not unravel.

Fold the paper in thirds lengthwise.

We take PVA glue and coat the lamp base with it around the circumference. Carefully apply the paper, collecting folds from it. We hope that it will be enough to cover the entire surface of the base. We fix the corrugated paper satin ribbon, tied with a bow approximately in the place where it was coated with glue.

Let the decoration stick. Our Christmas tree toy made from a light bulb is ready!

Serebryakova Anna specially for Women's News magazine

Making original New Year's toys from burnt out light bulbs is not at all difficult and very exciting. They can be hung on the Christmas tree or decorated in the interior, or given as a gift. As they say, fashionable, cheap and cheerful.

And such toys also add a touch of warmth, bring joy and, as they believed in the old days, fulfillment of desires. After all, our ancestors decorated Christmas trees with their own hands, and while they were creating the toy, they thought about their desires and how they would like to live in the new year. After they hung them on the tree, the desire was launched into the Universe and began to work.

You can involve children in the process of creating Christmas tree decorations from burnt out light bulbs; they really love such activities. But they must work with light bulbs under the supervision of adults, as they can injure themselves.

Toy options can be very different, for example:

• Draw a funny face and stick a bow or a hat from an egg carton on top (see video tutorial below)

• Wrap in paper or cloth

• Stick on sparkles, beads, rhinestones, sequins and so on

• Place figures, glitter, and confetti in the light bulb.

• And the easiest option is to simply paint the light bulb with spray paint and tie it with a bow

• Or make Christmas decorations from old light bulbs and glitter

To do this, you need to cover the light bulbs with PVA glue and roll the lamp in glitter. Fast, inexpensive and very beautiful. Is it true?

Or combine everything together.

And in order to hang the toy on the Christmas tree, you need to pierce the base and thread a thread there or simply wrap it around the base.

Or you can take a frosted light bulb; you don’t need to paint it.

How to make Christmas tree decorations with your own hands from light bulbs

You need to prepare for production:

• frosted light bulb
• Egg cartons
• Colored paper
• Adhesive tape for gluing
• A strong thread
• Regular marker and gouache for coloring

Everything is done very simply. If you want to make a hat like in the picture, then take an egg carton and cut out a tulip.

Or place paper on tape to wrap around the plinth and leave about an inch on both sides to complete the circle. And the base needs to be wrapped with thread so that the tape sticks to it.

After this, we wrap the base in paper. And glue a bow there.

Watch the video tutorial to see how easy it is to do it

Here is a video tutorial on how to make a toy using acrylic paints.

HAND MADE Incandescent lamp toy “Snowman”

Look how cute the snowman turns out.

Used in creation:

• Burnt out light bulb
• Acrylic paints
• Acrylic primer and sponge for painting (or use a frosted bulb to avoid painting)
• A piece of white felt for the stand (or other suitable material)
• A piece of fabric for a scarf
• Chenille stick (metal base with wound wool) for handles
• Loop tape and glue

The principle of action is clear to you, but here are a few more ideas for your inspiration.