Water manicure step by step at home. Step by step instructions for creating a water manicure. Variants and ideas

The fashion for matching the color of nails with shoes or a handbag has long been left in the past. Nowadays, originality is valued above all else. To be bright and special, to combine the style of idleness and everyday life, you need to remember about water manicure. You do not need special salon conditions, specific procedures, everything can be easily and efficiently done at home.

What is needed for water manicure?

The first element is manicured nails. Best of all, water, like any, looks on well-groomed, neat nails. Then we give shape, remove the cuticle, before that, be sure to steam your fingers in hot water. When the nails have acquired the appropriate look, and look natural and neat, prepare everything you need for the procedure.

We list what is needed:

dense dry wipes;
cotton rolls and sticks;
nail polish remover;
clerical narrow adhesive tape;
toothpicks;
a couple of bottles of contrasting varnishes for your pattern;
base varnish;
color enhancer.

4 secrets of water manicure

To be satisfied with the result, it is enough to use useful secrets, they will definitely come in handy during the procedure:

1 You need to use only inexpensive varnishes, they are good because they dry longer. This is perfect for a water manicure. Expensive varnishes dry out even before the nail plate is covered.
2 What kind of water is needed for water manicure? It is better to use warm water for this procedure so that the varnish does not have time to dry before being applied to the nail. use water room temperature.
3 Manicure should be bright and creative, so use a contrasting color of varnishes.
4 Do not be secondary to fixatives and foundations. Choose the base of any shade you like: pink, colorless, white. The fixer is important because the varnish applied thin layer, very easy to damage.

Water manicure at home step by step

Step 1: Preparing the nails
First, degrease the nails - the varnish will hold on tighter. Wipe each nail with a cotton swab dipped in nail polish remover. We wait a bit for the nail polish remover to disappear.

Step 2: Apply foundation
The next step is to apply the foundation. One coat of varnish is enough, but let it dry well.

Step 3: Protect your cuticles
At the third stage, we protect the cuticle from varnish. There are the following main ways:

Tape the nails with tape and leave only the nail plate.
Lubricate around the nail with hand cream, preferably very greasy. We will also use cuticle oil.

It is advisable to glue all the nails at once, so that during the procedure not to be distracted once again. If using oil, then lubricate alternately and make sure that the cream does not go onto the plate.

Step 4: Decide on the pattern
To do this, carefully, in good light, evaluate how the varnish lays down and what suits you best.

We drip varnish on the water. Approximately 10 drops. Waiting for it to spread. When the drops have spread well, we begin to create a pattern with a toothpick.

Divide into 4 parts, then into 8. To do this, you need to divide with a toothpick along the edges from the center. It is not necessary to immerse the toothpick deep into the water and after each wetting in the varnish, you should wipe the toothpick with a napkin.

Step 5: Apply the pattern to the nails
It is recommended to lower no more than 3 nails into the water. Bend your fingers so that your nails are parallel to the water. Hold your fingers for a couple of seconds and remove the remaining polish with a toothpick.

We remove the fingers from the water, remove the adhesive tape.

Let the polish dry and gently remove any excess polish with a cotton swab.

We carry out this procedure with each nail and repeat after applying to 2-3 fingers.

Step 5: Pinning the Pattern
The final step will be strengthening the nail with the appropriate varnish. It is worth performing the procedure after completing the water manicure on all nails. For additional decoration, you can decorate with sparkles or rhinestones.

Water manicure: Video

Making a marble manicure

Water black and white manicure

What if it doesn't work?

Most common mistakes are in such oversights as the choice of a narrow container for water. It is advisable to choose wider and deeper so that the fingers do not touch the edges and the nails do not reach the bottom.

Dirty toothpick. As already mentioned above - it must be wiped after each wetting.

The varnish should not be too viscous, if necessary, it can be diluted with water. Be sure to remove excess polish from the water when your fingers are in it. Otherwise, excess varnish can ruin the whole drawing and make it blurry.

Photo of water manicure for short nails

The nail industry does not stand still, every few months experts come up with new technologies for coloring and design. Fashion news in an instant win recognition from beautiful ladies. Girls take over stylish ideas wishing to perform the procedure at home. One of the trends in the nail industry is water manicure. Bright design will not go unnoticed, it is only important to observe practical advice and follow the instructions.

Necessary materials and tools

glass nail file of fine abrasiveness;
a bowl or container with a recess;
cosmetic swabs, cotton swabs;
base for color coating;
finishing varnish;
2-4 colored varnish liquid consistency;
skewer, thick needle or toothpicks;
fat cream, adhesive tape or electrical tape;
nail polish remover without acetone.

Water manicure technology

The main feature of water manicure is preparatory stage. The surface of the nails should be perfectly smooth, level it with glass file. Disinfect your hands, remove cuticles convenient way and shape the nail plate.
Cover your nails with a colorless base, wait until the first layer is absorbed and apply a second one. Alternatively, you can apply a second layer of a colored or white base, such a move will make the design more vivid.
water manicure differs in specifics. To facilitate the task and correctly carry out the procedure, take adhesive tape or electrical tape. Cut them into wide rectangular strips and glue the area around nail plate. Lay the strips one on top of the other to repeat the semicircle as much as possible. Make sure that the skin on the fingertips is protected. If you don’t want to bother with electrical tape or scotch tape, use the usual greasy cream (it is allowed to use a children’s one). Apply it in a generous layer on the area around the nails, avoiding contact with the plate.
Take a deep bowl and fill it with filtered water at room temperature. Be careful when using hot or too cold water manicure will not work.
Preparing the composition of the day of the procedure requires perseverance and attention to detail. Prepare several colored varnishes, shake and take the first of them. Take the mixture on a brush and bring it to the center of the bowl, a drop should fall into the water. Wait 10-15 seconds until it spreads over the surface.
Open a bottle with a different color, draw varnish on the brush and position your hand so that the drop falls into the center of the circle formed from the first shade. Wait a while for the composition to spread.
Take the varnish of the next shade and repeat the previous manipulations. Aim the drop at the center of the last color used. After all shades are mixed, wait 20 seconds.
To make the color saturated, you can increase the number of drops, for example, add them not once, but 3-4 times. At the same time, it is not necessary to drip them into the center (if the number is more than 1), create a pattern by chaotic mixing. If the composition does not spread well in water, draw a thick needle along the tangent of the edges of the bowl.
Start creating a pattern. If you want to make a star-shaped pattern, place the toothpick exactly in the center of the resulting varnish surface. Draw the first line to the edge, pull it out of the water. Return to the center again, draw a second line to the edge (the distance between the lines should be at least 1.5 cm). Repeat the steps until you get desired result. Do not immerse the toothpick deep in the water, work only with its tip. Clean your wand after each line you draw.
To create a floral pattern, place a toothpick at the edge of the bowl, touching the sides of the bowl. Slowly move your hand to the center, hold for 2 seconds and gently pull out the device. Go from the other edge in the same way, again lead the tip to the center. After each line, wipe the toothpick with a cotton pad and nail polish remover.
After correcting the pattern, you can begin to transfer it to the nails. Start by processing the little finger, moving one by one to the rest of the fingers. Place your fingernail parallel to the polish and slowly dip your finger into the water. At the same time, place a toothpick in the container and wind excess varnish onto it so that the pattern lies evenly on the plate. If you want to get an eccentric pattern, lower the nail perpendicularly, not parallel.
Pull your hand out of the water and begin to carefully remove the tape / tape. Be careful not to touch the nail plate, otherwise you will have to redo everything. After removing the sticky protection, clean the skin with nail polish remover and a Q-tip.
Transfer the pattern to the remaining fingers, then proceed to the processing of the other hand. At the end of the manipulations, cover the plate with a colorless finishing varnish to enhance the brightness. If desired, it is allowed to use a shimmering base, sequins, rhinestones and small sequins. Experiment!

Choose a wide and tall bowl. Otherwise, there is a risk that you will touch the edges and start the procedure over again each time. It is also not uncommon for girls to hastily spill the contents on clothes.
in spring and summer time give preference bright colors bases for water manicure. It can be yellow, red, light green or blue. In winter and autumn, limit yourself to gentle pastel colors, pink or white.
When you pass your finger through the water, be sure to pick up any leftover coating with a toothpick. Such a move will not allow the pattern to spread and will make the contours of the flower / star clear, not blurry. Otherwise, the remains will lie on top of the main pattern and overlap it.
Water manicure can be performed on long nails. The technology looks beautiful if you lower only the free edge of the plate into the composition. To make the transition clear, stick strips on the nail for french manicure and fix them with electrical tape or tape.
Do not immerse your fingers deep in water, always protect your skin. To remove varnish from the cuticle, use the tip of a toothpick, drawing a semicircle with it. Also, a toothpick can be replaced with a glass nail file, its edge is not sharp and suitable in width.
To prevent the varnish from spreading on the treated nail, carry out the procedure in turn. First lower the first finger, collect the excess, clean it and leave it in a horizontal position until complete drying. Only then proceed to the manicure of the remaining nails.
If you are left-handed, start the procedure with right hand. If right-handed - from the left. This is especially true for girls who do not have any experience in nail design.
Do not overdo it with aging varnish in water. It is necessary to prepare the composition for no longer than 1.5 minutes, after this time the colors begin to mix and the pattern is blurred. Try to quickly drip the composition and display a pattern on it.
For water manicure, only liquid varnishes are used, which spread into short term. If for some reason you have thick ones, add 4-6 drops of nail polish remover to the water. You can also pour it into the base bottle itself, but in this case you risk ruining the varnish.
Give preference only to the professional series of products. As a rule, their consistency is uniform, similar varnishes are suitable for each other in terms of chemical characteristics and last longer on the nails.
Pour only water at room temperature into the container. If the liquid is too cold, the varnish in it will not spread, and if it is hot, it will curl up.
Ladies who prefer conventional varnishes shellac, it is not forbidden to use it in water manicure. To do this, first degrease the plate and cover it with a base under the main surface. At the end of the procedure, dry the drawing in a UV lamp until completely dry.

cook necessary tools and materials. Always clean the toothpick after drawing lines to avoid mixing colors. Do not delay the preparation of the composition, otherwise the pattern will be smeared. Start processing with the little finger, gradually moving towards the rest of the nails.

Video: water manicure at home

Every woman at least once in her life dreamed of feeling like an artist. Now you have such an opportunity - to create a water manicure, and your nails will become the canvas.

Water manicure is like a real art, the technique of its implementation is very simple and unusual. Imagine, try and you will succeed!

Every year, designers come up with something new and never cease to delight us with their ideas for creating fashion manicure. Until recently, everyone created discreet drawings on nails, applied gels, decorated with stones, and now it has become popular to create a nail design called water. The technique of its creation is clear even to children!

Water, like the sea, mixes colors and turns them into incredible patterns, making fantastic stains, twisting them into a spiral.

Advantages of water manicure:

water design nails can be done at home;
each nail is made in the same style;
unique pattern on each nail;
simple technique.

It takes a little time to create it: preparing the nails, selecting materials, mixing colors with water and the application process.

Water design looks very nice even on nails of medium and short length like in this photo:

Necessary materials

If you want to create fashion design and emphasize your individuality, you need to know what tools and materials are used to create a water manicure.

Materials for water design:

Glass container.
100 ml of water.
Nail polish remover.
Children's hand cream.
Toothpicks.
Ear sticks.
transparent base.
Several colored varnishes.

To create a water design, you need a contrasting range of shades. When choosing varnishes for this manicure, you should pay attention to the compatibility of color shades.

Water design can be created from at least 2 basics, for example:

beige and brown;
Red and black;
orange and red;
white and purple.

If you want to use 3 colors, then the combinations will be something like this: white, light green, blue or pink, raspberry, black. However, experiment interesting combinations born in creative people.

How to smear around the nail when creating a water or ombre manicure

To create Beautiful design in the ombre or water manicure technique, you must take care in advance to protect the skin of the fingers, near the nail plate. The technology of water manicure is such that the skin around the nail will be painted with gel polish, no matter how hard you try to avoid it.

PVA glue to protect the skin around the nail when creating a water manicure

To protect the skin around the nail, when creating an ombre or water manicure, some girls use scotch tape. It's not the best practical way, because the properties of adhesive tape in the aquatic environment are lost, which allows the varnish to penetrate the skin. This seemingly insignificant trifle will ruin your design.

Of the improvised home remedies for such a manicure, greasy hand cream, petroleum jelly and PVA glue are perfect.

Any of these products can be applied to the skin around the nail, but there are nuances.

Applying cream or Vaseline for water manicure

When applying cream or petroleum jelly, it is necessary to finish the application of gel polish before these products are absorbed into the skin.

When applying PVA glue, you need to wait until the glue dries and creates a thin foam around the nail.

There is another way to protect the skin around the nail - cream Skin Defender. This tool is loved by the masters professional manicure for ease of use and naturalness.

Cream Skin Defender

Skin Defender cream contains rubber. After applying this product to the skin around the nail, it dries in a matter of minutes creating a reliable protective film that does not lose its properties in water and can be easily removed at the end of the manicure.

Important to remember! When applied to the skin around the nail of any of the listed products, the nail itself should be clean and as fat-free as possible. Otherwise, the water manicure will not last.

What varnishes can be used to make a water manicure

For water design, it is better to buy new varnishes, they must be liquid. If you decide to use old varnishes, then it is better to dilute them with a special solvent before use.

Gel polish is not suitable for creating this type of manicure, it will not spread in water, its base is dense.

Can be used holographic varnishes, they have an effect marble coating, and are also able to create unique patterns and spirals.

An unusual design is obtained using colored thermal varnishes. They change from heat color scheme. You can use several colors from two to six at the same time. The brighter color shades the more beautiful the drawing will be.

The video describes in detail what you need to pay attention to when choosing varnishes for water manicure.

Step-by-step instructions for creating a water manicure

Let's take a detailed look at the procedure for applying a water manicure step by step.

Cover your nails with white polish for a texture layers was brighter, and dry this layer well. (This step is optional, it all depends on the brightness and density of the varnishes that you use in this technique and the result you want to achieve.)
Take a narrow container and pour some warm water. A glass is ideal for this, it should not be very small, otherwise your nail will cling to the walls and the pattern may be smeared. And, if the capacity is very large, the consumption of varnishes will increase several times.
For beginners who have never tried water nail art before, it's best to start with two basics. For example, take white and pink nail polish And. Open the vials and prepare toothpicks.
Open white lacquer and at a distance of 3 cm, bring the brush to the glass, so that the drop falls right into it. Watch as it begins to spread in the water.
Now take a pink varnish and repeat the procedure, but so that the second drop falls into the center of the resulting white divorce.

Step 1 to get a heart water manicure design

Alternately changing white and pink color, repeat the water pattern process 7-8 times.

Each droplet should spread smoothly and turn into a circle. To create a more interesting pattern, take a toothpick and run it through the water from the center to the side of the glass, or vice versa (depending on which direction you move the toothpick, a pattern will form). The toothpick should be on the surface of the water, it should not be immersed deep.
Imagine that you are a talented artist and make beautiful pattern! Looking at the unusual circles that have formed, take a new toothpick and run it several times.

Step 2 to get a heart water manicure design

Thus, you will draw your manicure design, right in the water. But, do not get carried away with this creative process so that the varnishes do not start to curl. The pattern is done in just 1 minute!

How to make patterns on the water, you already understood. Your own drawing is ready, now it should be transferred to the nails. In order not to heavily pollute the fingers, you need a cream or a narrow duct tape. Apply the cream to the skin around the nail.
Then each nail in turn should be smoothly immersed in a container with a pattern. Your nail should be completely in the glass. With a toothpick you have to quickly in a circular motion remove excess varnish from water. Carefully remove your finger from the container and admire the original pattern made by yourself.
Step 3 to get a heart water manicure design
Now each nail in turn must be lowered into the water. Just do not rush, be patient, otherwise water design at home may not work.
If you used tape, remove it. Take cotton pad, saturate it with nail polish remover and gently remove excess from the skin.
After your abstract pattern has dried on your nails, it needs to be fixed. This is done with a top clear lacquer.

If you follow the scheme for distributing varnish over water indicated in the photo above, you will get a wonderful water manicure heart.

A visual consolidation of the theory has not hurt anyone yet, step-by-step instructions for creating a water manicure, video:

Water manicure gel polish

Create a water manicure using gel polish - it won't work!

Many women like to experiment, mix different styles and use different technique execution, creating all new and original designs nails. Therefore, if you still want to make a water manicure using gel polishes, then we suggest making an imitation of this effect.

To simulate a water manicure using gel polishes, you will need:

primer;
base base;
from two or more colored gel polishes;
thin brush for manicure No. 1;
Ultraviolet lamp.

For more information on how to create an imitation of water manicure with gel polish, see the video instructions.

How to create drawings on the water, various options

Professionals in the field of manicure never cease to amaze us with new ideas for creating marble manicure. Water nail art designs you can choose for every taste and color!

Strict manicure in black and white style

Black and white water manicure goes well with classic outfits. The technique for this design is simple, with the help of a toothpick we make a few swirls on the water. To decorate this manicure, you can add small silver sparkles.

Step by step video tutorial on creating a black and white water manicure.

Neon peas - bright water manicure

This type of water manicure is the most popular in 2017. For its implementation, we need bright neon varnishes (lemon, raspberry, light green and orange), for basic foundation- white and black varnish (for peas), as well as any spray.

Technique:

1 layer- apply plain white nail polish;

2 layer- visually divide the nail into 4 equal parts and cover each of them with different neon bases;

3 layer- into a container with water, pour 3-4 drops of black varnish and stir until translucent, take a spray and sprinkle into a container of water, you will get small black figures. Dip each nail into this mixture.

4-layer- wait until the black dries and apply a fixer.

You should end up with an amazing mixture of black polka dots on a bright neon background.

summer cocktail

Bright summer manicure, will go with any outfit and emphasize your perky image. To create a colorful water manicure, you need a little imagination and the brightest varnishes!

And the effect of tie dye - these experiments are possible thanks to a special water technique. Let's figure out what its features are, find out what tools you will need and how to use them, so that the result is a beautiful water nail art.

For those who are unfamiliar with various manicure techniques, it is difficult to immediately imagine what a water manicure is. The coating turns out to be similar to paint stains on the surface of water and, in fact, it is created in this way - with the only difference being that colored varnishes are used. Drops of different shades are mixed on the surface of the water, and then the resulting pattern is transferred to the nails - with a bright film.

Features of water manicure varnish

Due to the specifics of the technology used to create a water manicure, the question often arises: are all varnishes suitable for such purposes? There are indeed some restrictions. To avoid additional difficulties, follow a few recommendations:

First, try to use varnishes of the same brand. Make sure they are of good quality.

Secondly, it makes no sense to take quick-drying varnishes - they will harden on the surface of the water in a matter of seconds, and it will no longer be possible to fix the coating on the nails.

Thirdly, varnishes must be fresh enough. If they began to thicken, acquired a viscous consistency, then water manicure with their help will not work. Such varnishes do not spread over the water surface. properly, therefore, there can be no talk of creating a pattern.

The consumption of varnish with this technique is quite large. It will take not a couple of drops, but much more. Be prepared for the fact that the bottle may be a quarter or a third empty after one procedure.

What you need to do a water manicure at home

Have you decided to try the technique of water manicure? It is necessary to prepare in advance: there are a number of tools and items that you cannot do without in the process.

Lucky

You will need at least two shades. How more contrasting colors, the more expressive the patterns will be. Do not forget also about the base and top - without them, the manicure will hardly be of high quality.

Water tank

It should be deep enough, with wide edges - it will be easier to transfer the drawings from the surface of the water to the nails.

Toothpick or needle

With their help, stains of varnishes on water are mixed with each other to get a pattern.

Scotch

Plain paper tape is what you need! It will be needed to protect the skin from the nail polish.

Cotton pads, orange sticks, nail polish remover

They are indispensable for the correction of manicure and in order to remove excess varnish from the cuticles and other areas that will be affected in the process.

Fat cream

This tool has a dual function. Firstly, if you pre-treat the skin around the nails with it, it will be easier to remove the film from the varnish from it. Secondly, it is good to soften the cuticle with a cream after the manicure is ready.

Step by step instructions: how to make a water manicure

The first experience may leave the impression that there is a lot of trouble with such nail art, but each time this technique will come easier and easier. Before doing a water manicure for the first time, study step by step instructions on its creation.

Preparation

Gather everything necessary materials, tools and facilities. And also treat your nails: trim the shape, push back the cuticle, apply a base coat.

Create a drawing

In a container with warm water, add a few drops of varnish of the same shade and wait until they disperse on the surface of the water with a colored film. Further into the middle of the resulting color wheel you need to drip a varnish of a different shade - and repeat this with all the colors that you are going to use in manicure. Then take a toothpick or a needle to blend the borders between the colors and get beautiful stains like an intricate pattern.

So that in the process of transferring the pattern to the nails, the skin around does not get dirty, apply a greasy cream to the cuticle, and seal the border areas of the skin with paper tape. First, provide such “protection” to one hand, and then, when the manicure is ready on it, do the same with the second.

Transferring a picture

An important point: the finger must be lowered into the water so that the nail is under the varnish film. So it will be fixed on the surface of the nail plate. After holding your finger a little under water, take it out - already with a pattern on the nail.

cleansing

After the film on the nails is completely dry, remove the adhesive tape, and remove excess varnish with a special liquid.

At the end, after cleaning the area around the nails, apply a top coat-fixer on them, which completes the creation of a manicure.

Variants and ideas

You can experiment with it to your taste: draw wavy lines, spirals, zigzags and other patterns with a toothpick over the varnish film - the result will be expressive and unusual in any case. Get inspired by our selection of Instagram photos.

Beautiful nails with spectacular, original drawing will always attract admiring glances. Fashion trends marble patterns in nail design dictate to us, and they are very easy to make with the help of water and the color stains of nail polishes resulting from it. If you want to make yourself an interesting design on your nails, try water manicure. It looks spectacular, attractive and fantastic. It is possible to combine different color combinations and various, unique patterns.

Today site website will show what does a water manicure look like and how to do it yourself. Of course, such nail decoration requires accuracy, a certain skill, in order to ultimately get the desired result.

Creation of water manicure - creative process from which you will certainly get pleasure and good mood.

Water manicure - how to do?

Required:

Small glass of water room temperature. If the water is cold, the varnish will quickly harden and the pattern will not work. Hot water also not good, because will change the structure of the varnish.
Several colors of nail polishes(at least two colors). The palette can be any and the choice will depend on your taste and mood. Important! - Quick-drying varnishes are absolutely not suitable for water manicure.
Toothpick.
Scotch tape or heavy cream for application to the skin around the nails. This will help to quickly remove the colored lacquer film from the skin.
Top coat - clear nail polish , which is applied at the end of the entire procedure. Evens out the surface of the nail and adds gloss.

Water manicure can be done on all fingers or highlight one or two nails, because multi-colored nails are in fashion now. Already finished drawing can be covered with sparkling varnish with glitter.