A dog made of paper modules, assembly diagram. Modular origami Dog. Assembly diagram. Step-by-step instructions with photos

The figurine is made on the basis of a closed initial row in the shape of a cylinder, assembled from the bottom up. To decorate the figurine, paper eyes or ready-made plastic eyes and a nose were used.

Materials and tools:

Rectangular blanks: yellow - 98 pcs., white - 37 pcs., red (pink), brown - 1 pc.

PVA glue

Eyes 2 pcs.

Spout 1 pc.

Scissors.

Preparing parts

1. From all the yellow and white blanks, fold triangular modules using the diagram

2. Place the modules into piles, select modules from each of them the right colors in the quantity required for one row.

So we should have 98 yellow modules, 37 white modules.

Puppy assembly diagram

Assembling the base

1. Complete the initial row of 16 yellow modules.

The initial row consists of 2 rows of 8 yellow modules.

On the other side

2. Continue the set by hanging 7 yellow and 1 white module in the third row - this is the beginning of the puppy’s breast.

3. In the fourth row, hang 6 yellow and 2 white modules, placing them symmetrically white module previous row.

4. Turn the loops towards you.

5. In the fifth row, on the adjacent triangles of the white modules of the fourth row, perform an increase using white modules.

There will be 9 modules in a row, of which 4 are white and 5 are yellow.

Advice. This small increase will make the puppy's chest more convex, giving the figure a natural look.

6. Continue the set until the eighth row, hanging 9 modules in each row with loops facing you. Alternate colors according to the scheme.

7. In the eighth row, hang all 9 modules with broaches towards you, making a horizontal row of bends, alternating colors according to the diagram.

8. Hang the next four rows with loops towards you, using 9 modules of the corresponding colors for each row.

9. Thirteenth, the last row- incomplete. Hang 4 yellow modules with broaches towards you, placing them symmetrically with respect to the puppy’s face.

Ear assembly

Tail assembly

Assembling the feet

Craft design

1. Cut out the details of the eyes from the yellow and brown blanks and glue them with PVA glue.

We used ready-made plastic eyes.

2. Cut out the puppy’s tongue from the red (pink) blank.

3. Connect the remaining yellow and white modules as shown in the photo, forming the ears and tail of the puppy.

4. Insert the figurine design details as shown in the photos and glue the eyes in place.

Back view

To make the figure stronger, you can use glue when assembling the parts.

Our dog is ready

The paper folding technique - origami - came from Japan. It turns out funny crafts: animals, birds, etc. Creation paper crafts It takes little time and can be done even by small children.

Let's look at step-by-step instructions on how to make origami, today ways to create a DOG! This is a favorite pet, so this craft is most relevant. 2018 is dedicated specifically to the dog, she is the symbol of this year.

There are several ways to build a dog. Let us examine in detail the most beautiful crafts.

Types of origami dogs

White and brown puppy

You will need:

• 2 sheets of paper (brown on one side, white on the other);
• glue stick;
• dark colored felt-tip pen.

Need 2 squares brown tint, one for the head, and the 2nd for the body of the dog.

Making the head:

• Fold the square in half from corner to corner and leave for a while.
• We bend the bottom corner up to the diagonal of the triangle.
• For the ears, we bend the corners on the sides down, as in the diagram. We straighten it into diamond shapes. The result is brown ears and a white muzzle of the dog.
• Then top part you need to bend it downwards a little.
• For small nose We bend the lower corner of the workpiece upward.
• It remains to fold the workpiece along the cent (where the spout is). Let's get the dog's head, as if in profile, from the side.

Making a dog's body:

• Take the second square and fold it from corner to corner.
• We roughly divide the base of the triangle in half. Before reaching the marked middle, we bend the right corner upward - a “dog tail”.
• We turn this tail out so that it becomes white.
• Fold the left side of the triangle in half to the previously marked middle.
• Bend the top to the left to form a triangle.
• Now you need to carefully turn the workpiece out to get a white dog breast.

The final stage. We carefully secure the dog's head to the body with glue. Using a felt-tip pen, draw eyes for the dog. The dog will turn out as if it were alive.

Fox terrier

This method is easier than the previous one, and fox terriers are friendly and always get along well with children.

You will need:

• a sheet of colored paper of any color;
• dark marker.

Master class on how to make an origami dog:

• Cut a square out of paper, bend it diagonally - 2 lines.
• Two opposite corners need to be bent towards the center, they will touch.
• Bend one of these corners outward, as in the diagram. The corner should protrude beyond the workpiece; this will be the tail.
• On the other hand, bend a small corner inward. This is the future face of a fox terrier.
• Fold it horizontally in the middle along a line - this will be the body of the dog.
• We bend the upper part, as in the figure, upward to the left.
• Then we bend the smaller angle back into the workpiece.
• We turn our workpiece over to the other side. We repeat the same steps, only to the right (sections 6.7).
• The appearance of the dog is already visible. Now for the muzzle you need to lower the fold at the bottom of the dog’s muzzle. This is a goatee.
• For the ears, bend the upper corners slightly downwards.
• We draw the eyes with a felt-tip pen and the nose in the corner, the craft is ready!

DIY origami dog

You will need:

• colored paper;
• dark marker.

Stages of work:

• Fold the square from corner to corner diagonally.
• Then we unfold the square and fold the corners on the sides so that they exactly coincide with the diagonal line. It should look like a rhombus.
• The corner at the top needs to be folded down towards the center.
• We turn our workpiece over.
• We bend the corner from the bottom up to the edge, as shown in the diagram.
• We bend the corners from the sides towards the center. This is needed to mark the fold lines.
• Bend the corners from the sides and turn the workpiece over. Our dog's face will be here.
• We bend the small corner from the bottom upward - this is the nose.
• For the ears, the corners on the side should be bent downwards, as in the picture. Guide to the fold lines made earlier.
• Turn the workpiece over to the other side. We continue to form the ears and tail.
• The corners that protrude should be bent to the vertical line.
• Then straighten the triangle well.
• On the other side we repeat the steps. The ears are ready.

To get a ponytail, you need to bend the vertical triangle up and to the left, then bend it down and to the left again. The tail will point to the side.

Now the dog is ready, draw the eyes and a convex nose.

If you strictly follow the patterns for folding origami, you will get pets of various shapes and colors. Even if you create identical dogs, but choose different colors(purple, brown, yellow, red), then you can collect a whole collection of animals.

We offer various crafts How easy it is to make an origami dog out of paper in the photo below.

Photos of origami dogs

Creating a variety of figures using the origami technique is accessible to almost everyone. At the same time, even beginners can create a lot of crafts. You can make various crafts from paper using the origami technique, including animal figurines. At the same time, a simple square can turn into cranes, cats, dogs and other animals. In this master class I will show 10 options and patterns for folding a dog using paper origami technique - how to make it yourself with step by step photos graphs.

Such crafts are especially relevant before the New Year. The time is coming when yellow will rule the world earth dog. And this animal is the symbol and talisman of 2018.

Origami dog made of paper - master classes

01. Brown dog using origami technique

To create it you will need to take:

• 2 square brown sheets of paper (single sided);
• black marker;
• glue stick.

From one brown square we will make the head of the dog, and from the second - the body.

Let's start with the head. To create it, fold the sheet along two diagonals. After this, leave the workpiece folded in the form of a triangle.

Fold the bottom corner from the top layer of the triangle up.

To form the dog's ears, you need to bend the side corners.

Now they need to be straightened into diamond shapes.

Bend the upper part of the workpiece slightly downwards.

In order for the dog to have a nose, you need to bend the bottom corner slightly upward.

We fold our workpiece along midline, it turns out the dog’s head in profile.

Now we take another square and begin to create the body. To do this, fold the sheet diagonally.

Along the bottom side of the resulting triangle, mark the middle using a fold.

Now we form the tail of the dog. To do this, bend the right corner.

We turn the bent corner outward, we get a white tail.

We bend the left side of the triangle towards the middle, focusing on the previously made fold on the bottom side.

We bend the upper part of the body blank to the left in the form of a triangle.

Carefully turn the workpiece inside out so that the dog’s breast is white.

Using glue, we fix the head to the body.

Using a black marker, draw the doggie’s eyes.

Our first paper dog using the origami technique is ready.

02. Fox Terrier dog using origami technique - diagram

Creating crafts in the shape of animals is interesting not only for children. Dog lovers will certainly enjoy making crafts in the shape of a fox terrier. This dog breed is friendly, great with children, and energetic.

It has quite characteristic shapes, which allows you to embody this dog in the form of an origami craft. Step-by-step production fox terrier is given in this master class.

To create a dog, take:

• paper in the form of a square;
• black marker.

First, fold the sheet along two diagonals.

Now we bend the side corners (oppositely located) towards the center.

One corner should become the dog's tail. To do this, bend the left corner a little to the side; it should protrude beyond the boundaries of our workpiece. And with right side We bend a small corner inward. From this side we will form the dog's muzzle.

Fold the workpiece in half. This is how we make the body of a fox terrier.

The top layer needs to be bent in the form of a triangle to the left and up.

Now we bend the upper left corner in the opposite direction.

Let's turn the dog blank over to the other side.

Here we must repeat all the steps, but in a mirror image. Therefore, we bend the corner to the right and up.

Now the bent corner needs to be bent in the opposite direction. This is how the contours of our dog have already been outlined.

To form the muzzle, it is necessary to straighten the inner fold outward at the bottom.

Bend the dog's ears down on both sides.

All that remains is to draw the nose and eyes of our fox terrier.

The origami dog is ready.

03. Origami box in the shape of a dog

How to make one detailed master class see here.

04. Origami dog made from a banknote

A small dog made from a banknote is a symbol of prosperity and endless cash flow to the house. You can make a small dog out of a banknote using the origami technique. It may not be yellow or earthy, but it will definitely protect financial stability and happiness in the home. Usually dogs live next to people for this purpose, to serve as reliable protection.

You can make a dog using the origami technique using the method suggested below in just a few steps. The result will be a small sleeping puppy. Kids will love this type of creativity.

To model a small dog, prepare:

• banknote;
• black half bead;
• pencil.

How to make an origami dog out of money step by step:

01. Start working on folding money from a horizontal position.

02. A similar scheme is designed for a square, not a rectangle. But there is no point in cutting banknotes, because they have a certain value, this is money that, if desired, can be used for its intended purpose. To immediately ask square outline, direct the two narrow sides of the rectangle towards the center vertically.

03. In this position, continue making bends. Bend the resulting triangle-book horizontally and smooth the resulting narrow rectangle.

04. Unfold the previous fold. But the bill must remain folded into a square. Bend two side adjacent corners by about 1 cm, highlighting small right triangles.

05. Then bend the bottom corner on the other side, but more deeply, about 2 cm. But do not connect the bottom side to the center.

06. And fold the remaining upper corner. The resulting triangle should be beveled. Start turning the paper from the center, and step back a short distance from the side.

07. Bend the resulting structure horizontally in the center. All corners should remain folded according to the previously described method.

08. Turn one side of the resulting workpiece to the side, highlighting a triangular fragment. Place your finger on top between the layers of folded paper and turn the side towards you, straightening the triangle.

Thus, two parts of the dog figurine will appear in front of you - the back with a tail and the front (head with ears).

09. Grab the pointed tips of the ears and spread them apart. The figure is now completely assembled. Banknote, folded several times, holds its shape well, so you don’t have to use glue. The figurine of the dog seems to be lying and resting, tilting its head to the side.

10. Now you can make a muzzle on the triangle. To do this, we prepared a simple pencil and a half-bead (it would be better if it had an adhesive base). Carefully draw with a pencil closed eyes(if desired in the future, the thin line can be eliminated with an eraser). Glue on the black nose. A cute dog - a talisman of happiness and prosperity is ready.

An origami craft from a banknote is interesting view creativity, which attracts with its simplicity and possibility non-standard use money. The author of this master class is Elena Nikolaeva.

To create it, let's take:

• square brown sheet of paper;
• black marker.

Perform diagonal addition.

We unfold it and turn the side corners to the intended diagonal fold. As a result, the blank of the future dog should take the shape of a rhombus.

Fold the top corner down.

Let's turn the workpiece over to the other side.

The bottom corner needs to be folded up.

We bend the side corners towards the middle, this is required in order to outline the fold lines.

We bend the side corners and turn the workpiece itself over to the other side. On this side there will be a dog's face.

We turn the bottom corner up a little, this will be our doggie’s nose.

Let's start forming the ears. To do this, bend the side corners downwards, while focusing on the previously made vertical fold lines.

We make a symmetrical fold on the other side. This is how we outlined the ears of our dog.

Let's turn the craft around again on the other side. Here we will continue the formation of the ears, as well as the tail.

The protruding corners of the ears must be bent to a vertical line.

After this, the made triangle needs to be straightened and smoothed.

We do the same with the other side. The dog's ears are ready.

Let's take care of the ponytail. To do this, the vertically located triangle needs to be bent to the left.

Then we bend its upper edge down.

We form an internal fold.

On front side crafts, draw eyes and nose with a black marker.

Our origami dog is ready!

This craft can be done very easily and simply with your child. Little book lovers will be happy with such a cute bookmark. see here.

Video lessons

Paper biter dog

Easy origami for children

Dogs using modular origami technique

How to make an origami shepherd dog out of paper

Master class with step-by-step photos on making a puppy figurine using the origami technique “102 Dalmatians”

Tereshkova Tatyana Mikhailovna, teacher primary classes MBOU Secondary School No. 36 named after General A. M. Gorodnyansky, Smolensk
Description: This master class will be useful for primary education teachers, after-school teachers, additional education, parents and children.
Designed for children in grades 1-2.
Target: development creativity when working with paper.
Tasks:
- introduce children to the technique of paper folding - origami;
- teach how to do work step by step;
- develop imagination, attention, memory;
- develop fine motor skills;
- develop the ability to work in a group.
Materials:
White A4 paper, scissors, glue, black felt-tip pen or pencil; colour pencils; Whatman paper for designing collective work.

Preface.
One day I was faced with the task of conducting open lesson mug in an extended day group in 2nd grade. I wanted to choose a topic that was simple on the one hand, and interesting on the other, something that would get everyone excited. Why? I wanted all the children to turn out beautiful, decent jobs so that their stay in the after-school group is not boring.
After analyzing the interests of children, I found that the majority love dogs and cartoons. The solution came by itself - Dalmatians using origami technique!
So, here's what we got...

Progress.

A conversation about Dalmatian dogs.
Guys, of course you have all met dogs of this breed. What is it called? (Dalmatian)

What do you know about her? (Almost everyone remembered a movie or cartoon about Dalmatians).
I'll tell you a little about Dalmatians. It is difficult to say where this breed came from, but we can say with confidence that the Dalmatian breed is very ancient.
Once upon a time, there was a breed of dog very similar to Dalmatians. They called her the Bengal Pointer.
Dalmatians have long been in demand because they were used as shepherds in the field, they helped herd cattle, and helped in hunting, they were used as hounds.
What kind of character do you think Dalmatians have?
Scientists and dog breeders describe their character and disposition as follows: Dalmatians do not like to be bored, so they need long and interesting walks, they are normal with children, they are quite sensitive, very active and love to walk without a leash.

And today I invite each of you to have one pet- a little Dalmatian.

For this we need white paper, scissors and glue.
We will use the black pencil later. After all, Dalmatian puppies are born white, and spots appear later. So we will draw the spots later.

Briefing.
1. Take a sheet of white A4 paper.

2. We bend it in half and cut it into 2 halves along the fold line.

3. We take half the sheet, bend it as shown in the figure, cut off the excess, and get a square. We will use it to make the body of a puppy.

4. We make the front legs. We bend the square on both sides, as shown in the figure.

5. Turn over to the other side. We bend the triangle up at the bottom of the figure. This will be the tail.

6. Turn it over again. This is the front view.

7. Now we make the front legs. Bend the corners at the bottom on both sides and mark the fold lines. We need to bend and bend back the corners.

8. Now, along the intended fold lines, we “hide” the corners inward. We should end up with a shape like this.

9. Let's turn our figure over. On the reverse side we bend a small triangle at the top.

10. Turn it over again. The puppy's body is ready. Front view.

11. Let's start making the muzzle.
Take half of the remaining A4 sheet (see point 2.)

12. Bend it and cut it in half.

13. We take one of the halves of the sheet and make a square out of it (similar to step 3). From this square we will make a puppy's face.

14. Bend the square diagonally. We get this triangle.

15. Making the nose. We bend a small triangle from bottom to top.

16. Now let's make the ears. We bend the corners as shown in the figure.

17. Next we must “open” the ears.

The muzzle is ready.

18. The next stage is assembly. Using glue we connect the muzzle and body.

19. This is the puppy we got.

20. Now we “revive” our Dalmatian: we draw a face with felt-tip pens or pencils, and we draw spots in black, as our imagination dictates.

The work is ready!
And most importantly - no calculations or measurements!

Afterword...
As a result, we put together the Dalmatians during the lesson and two more days. Of course, 102 did not add up, but the result exceeded all expectations. My small victory - the children were 100% interested!

But what a family of Dalmatians our group ended up with!

Since the symbol of 2018 will be a dog, crafts from this animal will be very relevant. A good option is an origami dog made of paper. All my animals are in orange and yellow tones, because the year will be under the sign yellow dog. Please note, this range includes all sand shades: brown, mustard, orange, gold. So decide on the color of the dog, and forward to interesting activities and decorating the room for the New Year 2018 with the symbol of the year.

How to make an origami dog?

For work you only need colored paper. As usual, you need to cut a square of any desired size from it.

You need to make intersecting folds on this square. To do this, fold opposite corners together to form a triangle.

You will get the first fold.

Pull the left corner and place its tip in the center of the square, smoothing the fold.

Repeat this action with the next corner, directing it to the center.

Fold all the corners.

Unfold the left corner and place its tip on the side fold line, press it.

Return the side piece to its place.

Now bend the right corner, but not inward, but to the side. The exact width of the resulting fold is not very important, approximately about a third of the entire corner.

Pull the top and bring the straight top and bottom sides of the square together.

Press the fold. In general, in any origami craft you need to carefully smooth out the folds, so the work will look neat, and many small parts will fold more correctly, without unnecessary shifts and splits. To smooth out folds, it is convenient to use a small triangle, a protractor, or, as an option, a plastic card.

For convenience, you can pull out a corner from below.

And then bend the entire side up, making a fold from corner to corner.

Direct the corner itself downwards again. As you can see, the outline of a dog is already visible on this side.

Now turn the paper piece over to the other side. And here you need to do all the same actions that we performed on the first side.

Only in this case you need to make a fold from the lower left corner to the upper right. In this step, I did not lift the entire corner up, but immediately pulled the lower right corner, aligning it with the corner on back side, and made a fold. In the photo, the dog is a little uneven, but this is for convenience, it makes it easier to carefully fold the paper from corner to corner.

We level the work, the origami paper dog is almost ready. You just need to finish her face a little.

Finalizing the details

To do this, turn it towards you bottom. In the area of ​​the muzzle there is a fold in the form of a small triangle.

You need to pull it towards you and straighten it outward. Now the muzzle will be rectangular.

Finally, draw the dog’s nose and eyes. Alternatively, you can cut out the eyes from paper and use funny moving ones.