Do-it-yourself topiary made from sweets. Preparing for work. Master class on creating Raffaello topiary in the form of a sweet bouquet

Modern craftsmen make topiaries from the most different materials, including even sweets. In particular, such a type of craft as candy topiary is very popular. The popularity of such creations is well justified. First of all, trees of happiness made in this way ideally complement any interior.

And here is a brief step-by-step description:

1. We prepare materials and tools (wooden “trunk” of a tree, pot, foam ball as a basis for crowns, ribbons, sisal and beads - for additional decor. You will also need scissors and a glue gun.
2. Using scissors, we make a hole in the ball for the barrel, and using the blank for the barrel itself we make it more even.
3. Using a glue gun, glue the candies to the ball.
4. Wrap the barrel with decorative tape (use a little glue to secure it).
5. Then we make additional decorations with sisal.
6. We insert the trunk into the base (pot).
7. After the final decoration with ribbons and beads, your candy topiary is ready!

Remember! If you don’t have some material, you can replace it with something at hand: use a plastic one instead of a foam ball, roll it out of paper, and so on.

Making a tree from marshmallow candies

It's hard to find a person who doesn't like marshmallows. This sweet is popular among both children and adults. That is why in this article we will look at how to make topiary from such a dessert. First of all, you will need to acquire:

• approximately 0.5 kg of chewing marshmallows;
• plastic stick;
• cling film;
• satin ribbon;
• glaze;
• a bar of white chocolate;
• a small flower pot;
• foam ball;
• artificial moss;
• clean brush;
• plaster.

Attention! You can also make a unique " candy bouquet"from Raffaello, from Chupa Chups, from marmalade: there are plenty of options for topiaries made from candies.

When you make this candy topiary with your own hands, the master class will require you to go through 2 stages of work. As in the case of the lollipop craft, the first stage will be devoted to preparing the base. Here the steps are as follows:

• pierce foam ball plastic stick;
• wrap the ball with prepared cling film;
• knead a gypsum solution in a flower pot;
• insert a stick and ball structure into it;
• hold the craft with your hands until the solution reaches the desired hardness.

Set aside the frame for completely dry, and do this work yourself:

• prepare the glaze mixture;
• take a bar of white chocolate and melt it in a water bath;
• mix these two components;
• when the frame has hardened well, take the craft, soak a brush in the chocolate-glaze solution and apply the mixture to the surface of the ball;
• attach marshmallow pieces to the mixture;
• transfer the craft to a cool corner for 40 minutes;
• after that, wrap the trunk with a satin ribbon and decorate the bottom with artificial moss.

Usually on holidays it is customary to give flowers, but now few people will be surprised by a bouquet. Bouquets or topiaries made from candy are becoming increasingly popular. Topiary made from sweets, lollipops or marmalade is not only tasty and unexpected, but also beautiful gift, which will decorate and diversify any festive table. The article below outlines a master class on creating topiary from delicious sweets, armed with which anyone can create a candy tree with their own hands, without spending a lot of time and nerves on it, but they will help you with this step by step photo and video at the end of the article.

We study a master class on do-it-yourself candy topiary

• Flower pot
• Gypsum mortar with a consistency similar to sour cream
• Tree trunk stick
• Newspaper, woolen threads, foil
• Candies
• Depending on the type of candy, you will need fastening materials such as a hot glue gun, toothpicks, chocolate, caramel, and double-sided tape.
• Decorations for topiary if desired, these can be ribbon bows or hearts on a skewer, beads, flowers, rhinestones, sisal, pieces of fabric, etc.

In clay or ceramic flower pot a thick gypsum solution is laid out, a stick is placed in the center, this will be the trunk of the future candy tree. The stick can be painted, wrapped in satin or floral ribbon, covered with gold, or placed with rhinestones or sparkles on thermal glue. Afterwards you need to let the plaster set, this happens within about half an hour, but the plaster dries completely only within 24 hours. Further work on making a candy topiary can be continued with the already set plaster, but donate it, of course, no earlier than a day later.

It is possible to purchase a base for topiary ready-made; usually, specialized stores sell a foam or piaflora base. If you don't want to look ready-made base, then you can make it yourself. To do this, several sheets of newspaper are crumpled into a dense, heavy ball, which is then tied wool thread for fastening. Afterwards, the newspaper base is wrapped in thick foil in several layers.

But it is possible that the base can be replaced with a large apple, orange or a bun of butter dough. In this case, the entire crown of the candy tree will be edible, but do not forget that such a gift will be stored for no more than 2-3 days.

As noted above, all further work on assembling the candy tree of happiness depends on the type of candies you have chosen and the base for the topiary.

The basis is a newspaper or foam ball, candy round shape in foil or paper packaging, as in the photo below.

The candies are glued onto the glue gun in a tight ring until the entire base is filled. The glue gun can be replaced with double-sided tape, then the base ball must first be wrapped in a continuous layer of tape, and then the candies must be glued onto it. This method is convenient not only because of its simplicity, but also because the candies can be removed from the wrapper without any problems.

A newspaper or foam ball is used as a basis; candies in candy wrappers are attached to toothpicks using narrow masking tape. And then they stick into the base in rows. It is not only simple, but also practical way, the candies are simply removed from the toothpicks.

In this method, the base is edible; it can be an apple, a peeled orange, or a bun of pastry. Chocolate candies without packaging or marmalade is attached to the base using caramel or thick cream dense rows of rings. Perhaps the most tasty option. The downside of such a sweet tree is its perishability.

IN foam base Lollipops or other lollipops are stuck into tight rings. You can make such lollipops with your own hands, for example, by melting sugar or wrapping marmalade in cling film and then stringing it onto a stick.

There are a few simple ways decorate sweet topiary:

• Glue rhinestones, beads, beads onto the packaging of sweets
• Thread satin bows, paper or plastic hearts onto skewers or toothpicks and stick into the base.
• Wrap in a circle with rare beads
• Lay out the top layer of gypsum mortar with glass balls, shells, beads, and candies.
• Decorate the pot with fabric, tie it with ribbons, or apply a pattern with acrylic paints

Video selection on the topic of the article

As you can see, there are many options for a European candy tree, and to help you make a choice, we bring to your attention several interesting videos how to make topiary from sweets or marmalade with your own hands.

Unique comfort reigns in a house where the presence of a good housewife is felt. This manifests itself in cute little things that are often created by her hands. Becoming a jack of all trades is not easy, you need skills, knowledge and experience. However, there are interior decoration items that anyone can learn to make. Topiary is one of them. This is a fantasy tree, the crown of which can be made from any available materials. Candies are ideal for this purpose. Such a product will not only decorate the room, but will also become a great gift. New form A banal box with chocolate figures will pleasantly surprise those with a sweet tooth.

Topiary consists of several elements, so you first need to select base materials, and only then choose decorations for the crown.

The components of the future decorative tree are as follows:

• Pot. It should be large and heavy enough. Its size and weight are determined depending on similar parameters of the main structure. Candies can vary in weight, size and density, so first decide on the type of sweets you use, and then choose a pot. It is better to use a clay vessel.
• Material for giving the crown shape. Decide in what form geometric figure the tree's cap will be made. After that, create it from scrap materials. The best material for this is newspaper, which can be compressed to required type, and then fix the shape with tape. Will also fit finished goods– small children’s plastic or rubber balls. You can also cut out a shape from foam plastic.
• Trunk. You need a smooth and fairly long stick that can support the weight of the top. For small trees, even a simple pencil will do. In other cases, they use the handles of artistic brushes or buy blanks in handicraft stores.
• Related materials. These include glue, foam for filling the pot, pebbles, various little things to imitate fantasy soil, satin ribbons for decorating the trunk and, of course, the candies themselves.

Master class on creating topiary from Chupa Chups

Chupa Chups are children's favorite lollipops on thin plastic sticks. A tree made from such sweets will bring joy to any child. It’s not at all difficult to make; a master class will help with this, which will cover all the features of the creative process.

This topiary looks best in the form of a ball. To hide the sticks and secure the candies well, take a frame made of foam or other material in which it is easy to make many holes.

Prepare all the necessary parts of the craft - a pot, a trunk and a base for the crown. Also in this specific example we will need:

• Chupa chups. Take candies of the same size. Choose the wrapper color at your discretion. Don't use candies that are too large. They are very heavy, the top of the tree will be bulky, and the structure itself will be unstable.
• Satin ribbon. It is needed to wrap around a stick that imitates a trunk. Choose a color that matches the color of the candy wrappers.
• Pot. Use a heavy pot or load it with rocks. Otherwise, the structure may topple over—chupa chups weigh a lot.
• Polyurethane foam. It fills the pot. It will ensure the stability of the entire structure.
• Decor for a pot. If you don't want to reuse lollipops by sticking them into polyurethane foam, take a narrow strip of chiffon fabric and pins with colored round heads.
• Glue. Transparent, non-marking and quick-drying.
• Crown. Insert the candy sticks all the way to the base into the ball. Try to arrange the elements as much as possible closer friend to a friend so that the base material is not visible. The result was a hat made of candy canes.
• Trunk. Take a satin ribbon, carefully coat it with glue and completely wrap the barrel stick.
• Pot. Pour polyurethane foam inside and wait for it to harden. If there are any uneven spots at the top, cut them off so that the surface is not lumpy.
• Assembly. Stick the decorated stem into the pot, then put on the candy ball. To make the structure stronger, coat the connecting holes with glue.
• Take chiffon scarf and, draping it in graceful folds under the tree, pin it in several places. This will hide the foam in the pot and make the topiary more elegant.

Cute sweet gift ready.

Master class on creating Raffaello topiary in the form of a sweet bouquet

Topiary can look like not only a tree in a pot, but also a bouquet. In this case, it consists only of a hat of candies and a stick, which will serve as the base. This gift will please any woman or girl. Raffaello candies, light and in a nice snow-white wrapper, are suitable for this purpose.

Prepare the necessary materials:

• Raffaello. There should be so many of them that they fill the entire space of the base.
• The base is in the form of a ball or hemisphere. Take a structure from any lightweight material.
• Stick for the base. It is better to take it thicker and longer.
• Corrugated paper. Needed to create the illusion of wrapping a bouquet.
• Satin ribbons for tying the bouquet and decorating the base.
• Glue.

How to collect a bouquet

• Attach the candies to the base using glue.
• Cover the stick with paper and tie a satin ribbon around the top.
• Connect the cap and base by pushing them into each other.
• Wrap the structure in corrugated paper, creating a package for “flowers”.
• Tie the “bouquet” with ribbon.

The romantic gift is ready.

Other ideas for creating a DIY candy topiary

Candy is a fertile material for making topiary. They can be of any color, any shape and size. This opens up almost limitless possibilities for creativity.

What other ideas, in addition to those already discussed, can be implemented when creating a decorative tree?

• Sweets can be used without wrapping. Crowns are made from marmalade, marshmallows, toffees and other soft candies, which should be attached to the frame using toothpicks. This great idea for sweet tables at weddings.
• Sweet dragees, sugared nuts or small candies are poured into the pot. Such a filler will both make the structure heavier and serve additional source treats.
• In one pot there can be not one, but several trees - this is how different sweets are placed in one container. To do this, make a branching trunk using wire.

Master class on making topiary from candy (video)

Making gifts and interior items with your own hands is a great pleasure. The process goes easily when the master is confident in the result. Topiary is a souvenir that even beginners can make, but the result looks quite professional. Don't be afraid to experiment.

Candy topiary in the interior (photo)

Flower yummy!!!

Craft with your hands.
At the same time, I usually don’t care what to do: sew, knit, draw or glue. The main thing is to do something quietly in front of the TV and enjoy the sight of a sleeping child.

Knowing this, one of my work colleagues asked me to make her a candy bouquet. I haven’t done this before, but after looking through the Internet and looking at other people’s examples, I started building a floral treat. This is how I did it.
I bought 3 packs of these candies

I took green and white corrugated paper. I cut out leaves and petals from it. I made the base of the leaf a little narrower and rolled it into a tube.




For added elegance, I took five more candies and tied them to long sticks. The sweets were wrapped in white tulle and tied with a gold ribbon.

I tied a wire to one of the candy's tails, then attached white and green leaves around it. I wrapped the whole thing around the top with paper wax tape.

I took a roll of transparent wrapping paper and cut it into squares somewhere around 15X15. I folded the squares so that the central part would form a bracelet, to which I would then attach a wire.

I cut out a cube from foam plastic - size 15X15. The base was wrapped in green paper. If only the view from below would be aesthetic. I glued the paper to the foam using a hot glue gun. I glued the decorated cube to the stem and base of the bouquet.

I inserted bunches of twisted wrapping paper into the base of the bouquet (bottom).

Next, alternating candy flowers and bunches, I filled the entire surface of the foam.








I stuck these 5 candies into the top of the bouquet. I glued the gold beads with the same hot glue. That's all - your colleague's wedding gift bouquet is ready!



Author: svieta

Http://www.maminklub.lv/rukodelije/cvetochnaja-vkusnjashka

Topiary - unusual fashion decoration for the interior, combining a wide variety of materials, shapes and textures.

Topiary or candy tree is great idea for a gift for any holiday or birthday.

An original tree can serve as an interior decoration, and even become a dish for festive table. In this article we will tell you in detail how to make such a tree with your own hands.

What is topiary

Topiary (“European tree”, “Tree of happiness”) - interior decoration or gift in the style of European floristry; a product that has gained wide popularity these days. The craft is a small decorated figure in the shape of a tree.

Modern needlewomen use different kinds natural, artificial, decorative materials. Topiary consists of the so-called crown, base, trunk, pot and decorative ornaments.

The materials for such a tree can be both sweets and other goodies:

• candies with or without wrapper;
• marshmallows or marshmallows;
• icing, chocolate, nuts as decoration;
• lollipops;
• marmalade

The contents for such trees should be chosen according to your preferences. The main thing in the product will be its originality, individuality, presentation method and beauty.

Tree of Happiness

Materials for production

Firstly, in order to make a tree out of candy, you need to have patience, strength and have enough free time to implement your plan.

Secondly, you must have the following materials available:

• Pot. It should be combined with the size of the topiary crown, with its color and style. Instead, you can use a vase or any other suitable container.
• A stick or rod where the frame of the product will be attached.
• A ball-shaped base made of paper, papier-mâché or foam.
• Glue.
• Threads.
• Scissors.
• Sponge, polystyrene foam, decorative stones or something else to fill the pot.
• Ribbons, corrugated paper, organza for decoration.
• Decorative elements (beads, artificial flowers and blades of grass, lace, etc.)

Materials for topiary

The selection of colors for crafts should not be neglected. For a gift to a man, bright and girlish colors would be inappropriate and vice versa. A gift intended for a man should be kept in a calm color scheme, and decorative decorations are kept to a minimum. In the case of a gift for a girl or woman, the colors can be absolutely any, the main thing is to combine with each other. The number of decorations is selected based on tastes and preferences.

Barrel for a future product

Before you start assembling a candy tree, you first need to decide on the shape, size and length of the craft’s trunk. The composition itself is usually visually divided in a ratio of 5:3, of which 5 parts are occupied by the trunk and crown of the tree, and 3 parts are separated into a pot or stand.

The trunk can be in the form of:

• processed wooden stick;
• several bundles of wire twisted together;
• green metal rod (usually used for gardening);
• Chinese food sticks tied together.

To give the tree a natural look, the trunk should be given bends if the material itself allows it.

Wire barrel

For beauty, you can wrap the trunk of the product with satin ribbons or glue a couple of small decorative flowers, twigs to it, paste it with beads, paint it in suitable color spray paint or come up with your own version.

A budget option

Making a crown

How to make the main part of the craft? Creating a crown is the most creative and complex process. First you need to decide whether the candies will be “edible” in the future. If so, then they should be attached to the foam frame with a toothpick, and if the candies are wrapped, then they can also be attached with glue, but so that they can be easily removed later. If candies are used solely for decoration, they can be glued with strong glue.

Crown varieties

The ability to change the crown depending on the event will make the topiary multifunctional. In this case, the glue should be chosen to be weak or the frame of the craft should be made removable. Do-it-yourself candy products with such properties will attract a lot of attention.

If marshmallows in the product will be the main accent, then you don’t even need to add decorative elements. You should cover the frame with cling film and coat it with edible sticky cream, which will allow you to easily attach the marshmallows.

Flowers for the crown

It is advisable to select sweets that match each other in color and have approximately the same shape and size. Candies different sizes It would be better to wrap it in paper of different colors.

Sweet flowers

To give the candies more festive look, they can be pasted over with cut-out corrugated paper petals so that everything together looks like a real bud of a rose, peony or other flowers.

Example of creating flowers

The number of such buds will depend on the frame itself. It is better to leave space between the candies and fill it with decorative twigs or flowers than to try to attach all the buds closely.

After preparing all the components of the crown, the flowers are attached to the frame using glue or toothpicks - depending on the situation.

Wood assembly

For the final stage you should have more patience.

• We cut out a piece of polystyrene foam of the required shape so that it easily fits into the topiary pot.
• Lubricate the bottom of the pot with glue, attach foam plastic to it, and press tightly for better fixation. If the pot is filled with plaster, then you can decorate the base with artificial moss or decorative stones.
• We insert the already made barrel into the foam plastic, having previously coated the end of the barrel with glue.
• To hide an unsightly piece of material in a pot, you can cover it by pouring decorative pebbles into the pot or cutting out the desired shape from paper and pasting it on top. You can also drape a piece of foam plastic using beads, satin ribbons or decorative figures.
• We also attach the crown of the tree to the trunk, smearing its end with glue.

Master class on creating a tree from candies

Usually on holidays it is customary to give flowers, candies or some other gifts, but candy topiary will always be a win-win option in order to surprise someone.

Such a gift is not only original, but also delicious. It will certainly be remembered by the guests and the hero of the occasion. You can make a sweet tree not only as a gift, but also to decorate the interior of your home. It will be an excellent addition, replacing fresh flowers or figurines.