How to do a manicure on the water. How is a water manicure done? Real water design with liquid gel polish

Nails are an integral part of the image modern girl, which makes her image complete and complete. In order to remain original, the female gender undertakes many incredible tricks and methods to create a unique manicure. In some cases, this results in complex and lengthy procedures, but there is a way to create individual manicure, allowing you to use the entire creative potential and get great results. In some cases, the most common materials can help create a magical nail art.

How to do a manicure on the water at home

Oddly enough, the procedure for creating a water manicure is very simple. This will not take much time and will allow you to bring a unique nail pattern to your image, the parameters of which are determined only by the creator's imagination. This technique does not involve particularly complex manipulations and is accessible even for beginners.

The specificity of the so-called marble manicure is the consistent application of nail polish on the water surface, creating a soft colored film on the surface of the water. The drawing is transferred to the nail plate by immersing it in a container with liquid and extracting it with a finished masterpiece.

What water and tools are needed

Manicure does not require many auxiliary tools, it is only important to decide on the main colors, which will reflect the mood. You can create bright, catchy, truly summer drawings using warm colors varnish: yellow, red, green, blue. If an extravagant presentation is not suitable for this moment, then the nails can be covered with more severe shades using white and black colors. In water manicure, the main thing is that the contrast of color shades be realized, since this is hallmark technology.

It is important to understand that varnish is a rather specific material that behaves differently when certain conditions. Based on this, it is important that the water that is used to dilute the nail coating remains the same, cool temperature. The water temperature plays important role during the implementation of the event, for this reason, to ensure a constant thermal state of the liquid, a sufficiently deep container, such as a glass, should be used. After filling a pre-prepared vessel with cool water, you can start mixing paints.

It is also necessary to take care that the process does not drag out due to rubbing the varnish from soiled fingers. To do this, wrap your finger with any material that will protect them from staining. Adhesive plaster can be used as a barrier, sticky tape(adhesive tape), as well as any other material, wrapping the phalanx of the finger with it in such a way that for external influence only the nail plate was available.

It will also be necessary to prepare acetone, in case the varnish particles get on the skin, as they should be removed immediately with a cotton pad. You will also need a toothpick or some other thin pointed object to create a pattern. And, of course, a few nail polishes in matching colors.

Step by step instructions

First of all, add varnish to a glass of water. This should be done carefully by dripping, applying a drop of the same color to the center of the container. After the varnish has dispersed through the water, creating a thin film, we apply it in the middle of the round spot next color and so on until the desired number of shades is reached. The result should be something like a target.

Then it will be necessary to create the desired pattern, to achieve this goal, take a toothpick and make several cuts of the “target”, drawing it from the edge of the container to the base of the pattern. Having performed several manipulations, one can notice that a quite clear and satisfactory composition has formed on the water surface. It is important to remember that before each cut, the toothpick must be selected from moisture and varnish residue.

The next step will be the creation of "protective equipment" for the finger, so that the varnish film does not get on the skin, which dries up in a moment. After that, you can safely dip your finger into the water so that the nail falls parallel to the surface of the water. The immersed finger should be left in the liquid until the remains of the lacquer film are removed from the glass with a toothpick.

After all the steps have been completed, you can take out your finger and remove the barrier clothing from it. As a result, the nails remain very original manicure, which is very easy to create yourself at home.

Video tutorial on creating a marble manicure

This video tutorial will give you everything necessary instructions to create a marble manicure at home. Apart from simple tips, the author of the video offers several options for creating patterns to create an original and unique image.

Marble effect nail design photo ideas

The most important thing that is needed to create a marble effect on the nails is fantasy. Using a toothpick, you can not only cut the film from the edges to the center, but also vice versa. Spiral cuts will also look great, which allow you to create a marble effect. In fact, any chaotic manipulation with a thin tool will end creative idea nail design.

And the effect of tie dye - these experiments are possible thanks to a special water technique. Let's figure out what its features are, find out what tools you will need and how to use them, so that the result is a beautiful water nail art.

For those who are unfamiliar with various manicure techniques, it is immediately difficult to imagine what water manicure. The coating turns out to be similar to paint stains on the surface of water and, in fact, it is created in this way - with the only difference being that colored varnishes are used. Drops different shades mixed on the surface of the water, and then the resulting pattern is transferred to the nails - with a bright film.

Features of water manicure varnish

Due to the specifics of the technology used to create a water manicure, the question often arises: are all varnishes suitable for such purposes? There are indeed some restrictions. To avoid additional difficulties, follow a few recommendations:

First, try to use varnishes of the same brand. Make sure they are of good quality.

Secondly, it makes no sense to take quick-drying varnishes - they will harden on the surface of the water in a matter of seconds, and it will no longer be possible to fix the coating on the nails.

Thirdly, varnishes must be fresh enough. If they began to thicken, acquired a viscous consistency, then water manicure with their help will not work. Such varnishes do not spread over the water surface. properly, therefore, there can be no talk of creating a pattern.

The consumption of varnish with this technique is quite large. It will take not a couple of drops, but much more. Be prepared for the fact that the bottle may be a quarter or a third empty after one procedure.

What you need to do a water manicure at home

Have you decided to try the technique of water manicure? It is necessary to prepare in advance: there are a number of tools and items that you cannot do without in the process.

Lucky

You will need at least two shades. How more contrasting colors, the more expressive the patterns will be. Do not forget also about the base and top - without them, the manicure will hardly be of high quality.

Water tank

It should be deep enough, with wide edges - it will be easier to transfer the drawings from the surface of the water to the nails.

Toothpick or needle

With their help, stains of varnishes on water are mixed with each other to get a pattern.

Scotch

Plain paper tape is what you need! It will be needed to protect the skin from the nail polish.

Cotton pads, orange sticks, nail polish remover

They are indispensable for the correction of manicure and in order to remove excess varnish from the cuticles and other areas that will be affected in the process.

Fat cream

This tool has a dual function. Firstly, if you pre-treat the skin around the nails with it, it will be easier to remove the film from the varnish from it. Secondly, it is good to soften the cuticle with a cream after the manicure is ready.

Step by step instructions: how to make a water manicure

The first experience may leave the impression that there is a lot of trouble with such nail art, but each time this technique will come easier and easier. Before doing a water manicure for the first time, study step by step instructions on its creation.

Preparation

Gather everything necessary materials, tools and facilities. And also treat your nails: trim the shape, push back the cuticle, apply a base coat.

Create a drawing

In a container with warm water, add a few drops of varnish of the same shade and wait until they disperse on the surface of the water with a colored film. Further into the middle of the resulting color wheel you need to drip a varnish of a different shade - and repeat this with all the colors that you are going to use in manicure. Then take a toothpick or a needle to blend the borders between the colors and get beautiful stains like an intricate pattern.

So that in the process of transferring the pattern to the nails, the skin around does not get dirty, apply a greasy cream to the cuticle, and seal the border areas of the skin with paper tape. First, provide such “protection” to one hand, and then, when the manicure is ready on it, do the same with the second.

Transferring a picture

An important point: the finger must be lowered into the water so that the nail is under the varnish film. This is how it sticks to the surface. nail plate. After holding your finger a little under water, take it out - already with a pattern on the nail.

cleansing

After the film on the nails is completely dry, remove the adhesive tape, and remove excess varnish with a special liquid.

At the end, after cleaning the area around the nails, apply a top coat-fixer on them, which completes the creation of a manicure.

Variants and ideas

You can experiment with it to your taste: use a toothpick to draw wavy lines, spirals, zigzags and other patterns on the varnish film - the result will be expressive and unusual in any case. Get inspired by our selection of Instagram photos.

Hello dear readers! Stylish manicure simply cannot remain unnoticed, but will it be possible to do trendy manicure at home? Of course it will! Today I suggest you study water manicure (aka water manicure). I want to assure you that you will really like the result, because this nail art is in no way inferior in brightness and spectacular presentation - salon procedures. But there is a significant drawback here, this manicure does not always work out the first time, so if something didn’t work out for you, feel free to try again, the main thing is not to stop there, but having mastered it, you will delight yourself and others with stylish, bright nails !

What is needed for water manicure?

✔ Nail polish remover;

✔ Cotton buds and cotton pads;

✔ A couple of nail polishes (2-4 bottles);

✔ Clear varnish;

✔ Deep plate (you can use a glass or mug);

✔ Scotch tape, patch or greasy cream;

✔ Water at room temperature;

✔ Long skewer or needle.

How to do a water manicure - step by step instructions:

Step #1.We put the nails in order, move or cut the cuticle, give the nails desired shape(if required), trim and file.

Step #2.We fill the prepared container with water at room temperature.

Step #3.If you want to see a bright pattern, then cover your nails with white varnish, then generously lubricate the skin around the nail - fat cream(without touching the nail plate), in addition, you can cover the fingers in the nail area with a plaster or tape, the nail itself should remain open. This procedure carried out in order to apply the future pattern, only on the nail plate, and not on the entire nail area.

How to properly and quickly stick a finger for manicure with adhesive tape, you can learn from this video:

Step number 4.We take the first bottle of varnish and bring the brush to the surface of the water in a glass or plate, wait until a drop of varnish falls into the water. We see that the lacquer is spreading over the water surface, we take the next shade of lacquer and also add it to the water, in the same way we act with the following varnish runs (each time the lacquer must be dripped into the center of the water surface).

Water manicure photo

Step number 5.We arm ourselves with a toothpick, skewer or knitting needle, and slowly begin to draw out an intricate pattern. For example, if you move a skewer from the center to the edges, you will end up with a pattern resembling a star. And if you move from the edge to the center, you will see how the outline appears bright flower. You can fantasize, and freely move the skewer in any direction, in any case, you will get some kind of pattern. Here I want to reveal to you the secrets of water manicure: try not to immerse the skewer deep into the water, make smooth movements, be sure to wipe the skewer after each dive (clean cotton pad or paper towel), it is better to mix varnishes for a minute, in any case, try not to exceed this interval. Water manicure photo

Step number 6.We bring the finger to the water so that the nail looks down and is parallel to the pattern on the water, after which we immerse the finger in the water, carefully collecting the remaining varnish with a skewer (while the finger should remain in the water). After all the varnish in the water is collected, you can safely remove your finger. You will see that the varnish has covered not only the nail plate, but also the surface around the finger, covered with adhesive tape or cream. According to the above scheme, we cover all the other nails. RECOMMENDATION: For a manicure on the second hand, it is better to proceed only after complete drying varnish on the first hand.

Step number 7.After the varnish dries a little, remove the adhesive tape, arm yourself cotton swab dipped in nail polish remover, with which we carefully treat the area around the nail and its inside (subject to the remaining varnish). Water manicure photo

Step number 8.We cover the nails with a transparent fixative varnish and admire the result.

I suggest you watch a video on how to make a water manicure:

Below I want to analyze the most popular problems due to which it is not possible to carry out a water manicure (water manicure).

Why water manicure or the secrets of water manicure does not work:

1. Different patterns.In fact, this is not a problem at all, this nail art implies the presence of a single tint style, and not the identity of the patterns. From which we can conclude that the nails should not look exactly the same.

2. Constantly touch the walls of the water container with your finger. The reason is a small inconvenient container, replace a small cup with a large bowl, but remember that too large a container will lead to more varnish consumption.

3. The varnish does not spread on the surface of the water. The reason is the excessively thick varnish, for this manicure fresh, liquid varnishes are suitable. But in principle, you can also use old varnishes, after diluting them with a special solvent.

4. On the surface of the water, the varnish hardens quickly. Try replacing the water with warmer water.

5. In general, it is impossible to make such a manicure. Nothing surprising, you need to adapt, the first time rarely anyone gets the perfect nail art. Practice, you will definitely succeed!

6. A blurry pattern is obtained on the nail. Above, I wrote, when you immersed your finger in water, you need to carefully remove the varnish from the water surface - with a skewer, otherwise, at the moment you remove your finger, the remains of the varnish will block the main pattern and spoil the whole composition.

7. The pattern in the water is fuzzy. The fact is that varnish sticks to the skewer, so after each immersion in water, be sure to remove the remaining varnish from its surface.

Below you can see a selection of photos of water manicure.

The original manicure serves as a true decoration stylish fashionista. And the beauty industry does not upset its fans, offering more and more opportunities to look irresistible. One of the latest trends in this direction is a manicure with water. These are multi-colored fantasy patterns that simply fascinate with their brightness and individuality.

What is a water manicure?

Aqua manicure is created thanks to a unique technique based on a combination of varnish and water. In this way, drawings are obtained that cannot be reproduced using traditional methods.

Water manicure technique: step-by-step instruction in photos

To the delight of many women, it is quite possible to learn how to do a manicure with water at home. All the necessary items for this must be found at home:

a glass or other similar container;
clear varnish and several color samples;
fat cream, petroleum jelly or scotch tape;
wooden sticks or toothpicks;
cotton buds;
nail polish remover;
napkins and cotton pads.

The procedure itself is simple, but requires accuracy and patience. At first, the whole process takes about 2 hours, but later, with the acquisition of experience, it will take only an hour to apply a manicure.

So, a description of how to make a manicure with water with an illustration of the process in the photographs.

Prepare nails

Before you start drawing a picture, you need to prepare your nails:

treat hands with an antiseptic;
remove old varnish;
model the shape of nails;
move and cut cuticles;
apply a base coat.

The first layer can be finished with clear or white lacquer. Sometimes a specific color is used for this, which will be combined with the overall concept of manicure.

After that, it is necessary to ensure that the varnish does not get on the skin around the nail. The first way is to carefully wrap each finger with tape, leaving only the nail plate open.

Or lubricate individual areas (do not forget about the cuticle) with a greasy cream or vaseline, removing its remnants from the nails with a cotton swab.

If it is bad to wipe the cream on the nail plate, then the varnish will stick badly in that place.

Prepare equipment and materials

For gradient manicure you need to take a glass or a container of a similar diameter of such a size that when immersed inside the nail, it does not touch its edge.

No utensils needed large diameter. This will lead to uneconomical consumption of varnish.

pour warm water. Make sure the water is not foreign bodies or air bubbles.

The water temperature should be approximately 40°. In another case, the varnish will curl up (if the water is hot) or will not stick to the nail at all (if the water is cold) and the manicure will not work.

Open jars of varnish and prepare toothpicks and cotton pads.

Create drawing

Drawing for water manicure is created by alternately dripping 1 - 2 drops of varnish different color to the surface of the water.

Varnishes must be liquid, otherwise they will not spread well. If you try to dilute a thick or dried varnish with a special liquid, this will not always help. Such varnish can be completely dissolved in water.

First, in the center of the container with water, you need to drop a couple of drops of varnish and wait until it spreads. If the drop takes a long time to spread, you can slightly speed up the process by moving a toothpick through the water around the edges of the dish.

You need to drip carefully from the brush, bringing it 2 cm to the surface of the water. If higher, the drop may simply sink.

Then, in the middle of the resulting stain, add a drop of varnish of a different color.

So continue until 4 - 7 multi-colored single-centered circles are formed on the surface.

Colors can be repeated. Or use different colors.

After that, you can start modeling the pattern. To do this, you need to make divorces with a toothpick, making various movements in different directions. Movements can be both chaotic and symmetrical, which will help create a flower, star or butterfly.

The toothpick will periodically have to be carefully wiped with a cotton pad, otherwise the pattern will be smeared.

Everything has to be done quickly! From the beginning of the creation of circles to the completion of the drawing, no more than 35 - 60 seconds should pass.

Draw on the nail

It's time to transfer the drawing to the nail. To do this, slowly, in one motion, parallel to the surface, lower the nail into the water directly onto the drawing (select the most successful area). The lacquer will immediately stick to the nail. The nail must be completely dipped and kept under water, and with a toothpick or cotton swab, making rotational movements, remove all remnants of varnish around the finger. And only then carefully remove the finger.

You can also dip your finger perpendicular to the surface of the water, but then the pattern will be abstract and fuzzy.

Complete manicure

Finally, remove the tape or wipe off the cream. Then gently wipe the polish around the nail with a cotton swab dipped in nail polish remover.

This procedure is carried out for each nail separately. Be sure to wait until the varnish dries on the treated nail and only then continue the process.

You need to make sure that the water is always warm. Drawing from varnish on water is done in a new way every time.

When all the nails are painted and dry, it is necessary to apply the final coat with a clear varnish.

Manicure with water and varnish is ready!

If something did not work out, then you can erase the unsuccessful manicure and do it all over again.

Problems may arise if:

It is wrong to dip your fingers in water or take them out of the water too quickly without removing excess varnish;

Water at the wrong temperature.

The necessary skill comes with experience. Having done such an aqua manicure a couple of times, everyone can learn how to apply it evenly and accurately. Even the drawings, over time, will turn out to be almost the same on all fingers.

Having improved your water manicure skills, you can try applying it on several fingers at the same time: https://youtu.be/Aak2q1vea-0.

Video instruction on how to make a manicure with water

More clearly, the whole process of creating a manicure with water is captured on video.

Learning how to do a water manicure is not difficult and you will have the opportunity to surprise others with incomparable patterns on your nails every time.

Before you make a water manicure with gel polish, you should figure out if it can be done with such a varnish coating at all, because the gel component makes the varnish much heavier and it simply sinks in water.

How is a water manicure done?

The second name of water manicure is marble. For execution beautiful patterns on the nails you do not need to work with a thin brush, carefully drawing all the curves. Water and the properties of the varnish composition will do everything for you. You just have to choose harmonious combination varnishes, because for such a manicure you will need more than one color.

The main feature of water design is that every time you get a unique pattern that makes your manicure unique and inimitable.

The principle of creating such a manicure is simple. It is enough to alternately drip varnishes into a container of water different colors. A colored film forms on the surface of the water. Drawing on it with a toothpick, you can create bizarre stains and patterns. However, do not rush to draw water into a bowl to get good result it is important to know some secrets.

The nuances of water manicure

To perform such a manicure you will need:

Varnishes of different shades. Two or more colors may be used. The main thing is that they harmonize well with each other. The varnish should be sufficiently liquid and fresh. Besides it is necessary to use varnishes of one firm. But do not rush to do a water manicure with gel polish, because the manicure technique depends on the type of varnish.
In addition to varnishes, you need to find a container for water. Since the walls of the dish will certainly be varnished, take disposable tableware, for example, a glass made of polyethylene. And so that it does not turn over, put a few pebbles on the bottom.
You also need to protect the skin around the nail from accidental staining. For this, ordinary adhesive tape, wax or nourishing cream is suitable.
A toothpick is needed to draw stains and patterns on a varnish stain.
Solvent, cotton wool and sticks will be needed to clean the area around nails and tools from varnish.
Also, you can not do without the base and finishing means for manicure.

Some masters claim that it is impossible to make a water manicure using gel polish because of its high density. It simply sinks in water, and does not blur with a thin film on its surface. But today on sale you can find gel polishes from different manufacturers. This is what gives you a chance to make a real water manicure with gel polish.

So to do marble manicure, you need to choose a gel polish according to the following criteria:

It should be quite fluid. This is the most main factor when choosing varnish. Very heavy dense gel polish will sink to the bottom of a bowl of water. That is why it is not recommended to use Shellac brand gels.
When choosing different colors, use only varnishes from the same manufacturer. Varnishes of different brands differ in composition, so they may react differently to such a neighborhood.
The color of the varnish must be very saturated in order to give good coverage in one layer.
The varnish must be fresh, not dry.
It is impossible to dilute varnishes with a solvent to obtain a more liquid consistency. Otherwise, they behave quite unexpectedly in the water.

But, even using a thick thick gel polish, for example, Shellac brand, you can make a marble manicure. However, this will be an imitation, and not a real water masterpiece.

Real water design with liquid gel polish

Having prepared everything you need for a manicure, you can proceed. First, fill a bowl with water. Unscrew the caps on all the nail polish bottles and simply cover them with caps. Place toothpicks and cotton wool soaked in solvent nearby. Prepare each finger:

Complete hygienic manicure: clean the cuticle, adjust the length and shape of the nails.
Sand and degrease the nail plates.
Apply a colored base to your nails. You can use one of the selected varnishes as a base.
Protect the skin around your nails with tape or wax.

Drop the gel into a container of water. It will spread over the entire surface. Make the next spot with a gel of a different color, carefully placing a dot in the center of the film. You will get sharper borders of the spot. So alternating varnishes, we put dots in the center of the varnish stain. As a result, you will get a pattern of multi-colored rings.
Now we take a toothpick and make stains on the surface of the colored layer. You can draw patterns, stripes, teeth, flowers, spirals, stars and more.
Now we bring the fingernail to the stain, holding it parallel to the water surface. Immerse your finger in the water, trying to prevent the varnish from getting beyond the borders. protective coating around the nail.
We quickly wrap a varnish film on the ear stick from the surface of the water, separating it from our finger.
Now the finger can be removed, the protection around the nail removed, and the varnish that has fallen on the finger can be washed off with a solvent.
For each nail plate, you will have to create your own spot.
After the varnish has dried under the lamp, we apply the top coat.

Since it sinks in water, the thick gel polish does not form a film on the surface. However, water manicure can be imitated. To do this, you need to prepare the nails: process the cuticle, correct the shape and length, apply the base.

After that, we paint the nails with varnishes of different colors, making vertical or horizontal stripes. Then, with the thinnest brush, we drive along the surface of the nail, creating stains and patterns, like a water manicure. The brush will have to be periodically wiped to get pure colors.

Now you need to place the nails with patterns under ultraviolet lamp. After the varnish has dried, apply the top coat.

If you do not know how to do a water manicure with gel polish, you can order such a nail design in the Manicurof salon. To make an appointment and clarify the prices, call the specified phone number.