Box for money. Treasury for a wedding in the form of a box for money: the design of a family bank

It is customary for a newlywed couple to give wedding gifts This tradition is rooted in ancient times. A certain amount of money is considered a popular present, so that the newly-made family decides for itself what they need to purchase. However, donated banknotes must be carefully folded so as not to lose anything. For such purposes, beautiful wedding chests with a cut hole were invented, into which it is easy to put envelopes with money. It is not at all necessary to purchase such a chest if you have minimal creative abilities.

What you need to make a chest

Many couples at the wedding use ordinary trays on which guests leave envelopes with money, but this option is considered unsafe and not original, because money can easily fall out and get lost. And hide banknotes in a pocket it is completely uncomfortable - then the groom or the witness look unpresentable, since the pockets are protruding, and the overall gloss is broken. Therefore, the chest self made – The best decision For wedding celebration.

The chest is a box rectangular shape or a suitcase in the form of a casket. It is beautifully decorated with all kinds of decorative materials, the color scheme is chosen to match the color of the thematic celebration or classic white, black, brown. To add a touch of originality, you should decorate the chest in a more non-standard form and with your own hands, adding symbolism to this attribute of the wedding.

Even more complex and unusual shapes do not require the work of craftsmen, everything can be done at home, with your own hands. For example, original and unusual decision will become the manufacture wedding box for money in the form birthday cake, boxes or houses, which will symbolize the family hearth. To complete this task, you will definitely need:

High-quality glue (PVA, clerical, glue gun is better).
Cardboard box (medium size).
Stationery knife.
Scotch.
All kinds of decorative elements: beads, ribbons, pictures, pebbles, shells.
Colored paper for exterior and interior decoration.

Tools and materials

In order to make a really high-quality and visually beautiful chest for money with your own hands, you need to use the right materials and get necessary tools. All materials can be easily found at home - in the pantry or in the parent's garage, and decorative details can be found in needlework stores. Of the tools you will need:

Scissors.
Stationery knife.
A figure hole puncher that can make a variety of colored figures to decorate the chest.
Good glue.
Gun for gluing small parts.
Scotch tape (double-sided is best).
Ruler.

The quality of the glue will determine how tightly the decorative elements, decoration paper will hold, and whether the box will stick by the end of the celebration. To make the chest neat with no visible seams, you should use double-sided tape, as well as a glue gun, which will carefully distribute the adhesive on all the small parts. If speak about necessary materials, then for the manufacture and decoration of this attribute are ideal:

Box right size or thick A4 cardboard.
Drapery fabric. It can be silk, satin, velvet and others.
Ribbons, laces.
Openwork lace fabrics.
Beads, stones, crystals, beads, shells, leather, carvings, photographs.

After all the materials and tools are collected, you should proceed to the next stage in the manufacture of an attribute for money. You should look for diagrams, drawings and patterns on the Internet, but there is another way: buy several magazines that describe all the moments of preparing a wedding. If you are not sure that you can make everything yourself, you should use the services of craftsmen or involve your mother or grandmother in the work.

Scheme or pattern

In order to start making a chest, you need to prepare the ground, or rather, make patterns or diagrams. The pattern can be made using a large cardboard box.

The back of the chest needs to be made higher than the front.
The length in this situation should be equal to the sum of the height of the front and the width of the box.
The top cover can be made by hand, more curly, as shown in the diagram.

If you plan to make a chest with your own hands not from a standard box, but use A4 cardboard sheets, then the task becomes somewhat more complicated. Don't worry, our goal is achievable, but we will have to make a little more effort to achieve it:

The lower protrusion should be about seventy millimeters with a slot on top of the entire pattern so that the bottom does not fall out.
The desired slot for money envelopes should be made directly on the pattern, because after the chest is ready to cut the hole will become a little problematic. This pattern is shown below.

A chest for money for a wedding from a shoe box master class with a photo

To easily make a beautiful wedding chest, you need to use the help: see detailed wizard a class that describes all the points in detail, step by step. The easiest way to make such a product is using a regular cardboard shoe box. To do this, you will need accessories, decor, fabrics, glue, scissors, adhesive tape and, of course, the cardboard shoe box itself.

First, cut out the lid of the shoe box as shown in the picture.

After the first step is done, it is imperative to make a dome, which is made from the lid of a shoe box. To do this, we can glue the cardboard to the box that we cut out earlier. The whole composition should look like an arch, you need to add a piece of cardboard on the side and secure it with thick tape. If you think that one adhesive tape will not be enough, then you should also use paper clips and a stapler.

The third step is lining the chest. From the very beginning, you should measure the parameters of the lid and the box itself. After that, it is necessary to cut off the part of the fabric we need for the upper part. Then we begin to carefully sheathe. Next, we sheathe the box itself in the same way. Everything should be done carefully, slowly, then you get an impeccable and beautiful result.

The fourth step is considered one of the easiest, but at the same time, crucial steps. We cut the hole we need for the money, or better for the whole envelope, and then we check whether the bills will fit in there. So that there are no arrows, lines on the fabric and it does not roll up, be sure to draw a burning match in that area. Be careful not to burn all finished box.

The last and most interesting step in making a do-it-yourself wedding money box is an original and colorful decoration. Here you can show all your imagination. Outlines and side panels can be embellished with beautiful satin or lace ribbons. Do not feel sorry for beads, rhinestones and beautiful bows as decorations, they are successfully emphasized holiday look boxes. The side panels can be decorated with stylish photos of the newlyweds.

A wedding is the brightest, solemn and beautiful event in life. Preparations for this ceremony are long and thorough. It is necessary to think over every detail down to the small decorations that adorn the holiday. Important points wedding event are the traditions that accompany the celebration throughout the entire time of the event. Often, entertainment and items involved in them are prepared by relatives, close friends, girlfriends. It can be balls, coins, photo collages, crackers, various costumes. Not less than important accessory is a do-it-yourself wedding money box. Consider several options for collecting a chest, as well as decorating it.

Box options

During the wedding, it is customary to collect money for the newlyweds to jointly purchase the first necessary thing. Previously, large trays were often used to collect gifts. Nowadays, caskets have become popular, in which invitees put envelopes with money. Basically, a wedding chest is made of cardboard. To create it, use boxes various sizes. You can take containers from shoes or glasses. Traditional chests used at celebrations are made in the form of a casket. But the rectangular shape of the product is not excluded.

Chests with a model of a cake, a stroller, a car, a house, a heart look original. A do-it-yourself wedding money box can be decorated with any material. Caskets are covered with various satin or velvet fabrics, decorated with lace, rhinestones, beads, silk ribbons, braid.

Traditional form

Let's take a look at one of the ways a wedding money box can be made. It is not difficult to create a casket with your own hands. Prepare cardboard, glue, masking tape, scissors. Next, you need to cut a rectangular blank from the base. Raise two opposite edges, creating a box with a bottom and two sides. The details must be of such a height that it is possible to form the lid of the casket. In order for the upper parts to bend smoothly, it is necessary to apply horizontal recesses at an equal distance from each other. Then, having removed the parameters of the future box, cut out the corresponding side parts with a rounded top from cardboard. Using adhesive tape, fasten all the elements, giving the box the shape of a chest. Cut a hole in the lid into which guests will drop envelopes.

Chest decoration

Once the box is set, it's time to think about how to decorate the wedding money box. Performing the main background, they often use satin, wallpaper or beautiful paper. It is wise to start pasting from the sides of the box so that, working from the front and back sides, carefully cover the allowances. Inside the wedding chest, also decorate with fabric or decorative paper. You can cover the bottom of the box with red material to “attract” large bills. WITH outside decorate the casket with flowers from ribbons, various beads, rhinestones, beads. You can create an imitation of rings from cardboard or any suitable material and attach it to the lid of the money house.

Wedding money box: master class

The next proposed box looks like wedding cake from two tiers. To create the chest in question, you need to find round box, for example, from tea service or chocolates. If you don't find desired shape, then make a round layout out of cardboard. Cut a hole in the lid of the lower tier, moving away from the edge of 3-4 cm, so that the cake inside is hollow. At the top with a smaller diameter, make a slot for money. Combine both elements, forming the shape of the cake. Then cover the box with decorative paper or wallpaper. Mask the joints with lace. Do the same for the top hole. Add beads, rhinestones, small accessories to the decor. Flowers from satin ribbons made using the kanzashi technique look original.

Piggy bank for young people

Getting to the next version of the box, we note that we need a tall box. A house for money for a wedding, like any dwelling, must have a roof. We will make it from two cardboard rectangles glued together at an angle of 90 degrees. We cut off the top of the box in such a way that the roof easily lies on the tops formed. Next, stir the glue by adding the same amount of water. Then we soak the decorative napkins with a solution and, slightly crushing, paste over the surface of the house. Thanks to this manipulation, a very beautiful effect plasters. Leave the box to dry. Decorate the house with frames in the form of windows and place a photo of the newlyweds. Decorate the box with hearts and flowers.

small wedding gift box

Nowadays, more and more often classic postal envelopes are replaced by gift box for money for the wedding. It is not difficult to make such packaging with your own hands. Cut out a piece of cardboard with dimensions of 18x20 cm. In the middle along the rectangle, make two grooves, leaving 2 cm between them - this is how a book spine is formed. Next, you need to collect a box for money. Before this, it is necessary to cut out a part with a bottom size corresponding to the parameters of the bill with small allowances. In addition, 4 cm are added from the short sides, and 2 cm from the long sides. Then you need to make cuts along the sides along a rectangle 4 cm long. Bend the long sides, glue the segments to the sides and cover them with an allowance of 2 cm. From decorative paper cut out a rectangle corresponding to the cover and glue both parts, laying ribbon ties between them.

Decorate the bottom of the box with the same paper, and also glue it to the main element. Decorate the outside of the cover with a napkin, placing it in the middle of the spine. Then pick up the lace, lay out the curls from the half-beads and decorate the box.

It all started with the fact that I felt sorry for throwing out boxes from under the glasses. But having understood the principle of work, it will be possible to turn almost any box into a pretty wedding chest for money.

There were partitions in this box, which I got rid of ... I brought the box to such a view as in the photo!

On one of the sidewalls we draw such a contour typical for the lid of the chest. You can stick to any size. It is possible and "by eye" To whom it is convenient!
We do the second sidewall in the same way! but on the "profile" we draw two stripes: the first connects the lower points of each arc on the sidewall, and the second is the height of our future cover.

Now we take scissors in our hands and cut off the "excess". Create a "bulge" of the lid. I think the photo shows what I mean.
The next step: the lid of my box is quite tight and just doesn't want to bend nicely. Therefore, with the blunt side of the scissors, I make such grooves (on the inside of the box). The distance between the barbs is arbitrary - I have about 1.5 cm.

Now I cut along the bottom line in three !!! parties. I did it with a sharp knife.

"Finishing" the lid of my chest. Personally, I take sticky paper tape, which is sold in hardware stores, is called construction tape;) Well, I take it, tear off the pieces and fix the lid parts together with them.

This photo is more visible.
I cut off with scissors (you can also use a knife) the "extra" part of the lid. I connect everything with the same adhesive tape.

Well ... something is already being drawn ...

If money is thrown into this chest, then it's time to think over a "hole" ... for this inside I draw the lids and cut them out with a sharp knife.

Tip number 1:
if you just cut along the "bottom" line, then after we paste over our chest, it will not be able to close well. Therefore, it is worth increasing our cut, as I tried to show in the photo, up to about 3 millimeters.

We begin to glue our chest. It was for this chest that I again picked up the wallpaper that I bought specially for this.
I cut off the first piece: length \u003d two widths of the side walls + the width of the front wall + two gates (I have 5 centimeters each .. but less can be). Height \u003d wall height + two gates.

I stick it on glue from a spray can (as in the photo), but this is my personal choice!

I begin to paste over: first the front and two sidewalls, then I bend it over the back, then I cut it in the corners and tuck it up. After all, I smooth it out, expel the air and once again press it well.

The next step: circling the sides of the lid, I cut out such blanks.

Glue the sides of the lid.

Having measured the width of the chest, I cut out the next part. She will need to paste over: the bottom, back wall and cover. So you will need to calculate the length taking into account all these details.

While the glue has not yet hardened, I make such a cut.

This is how the hole for the envelopes turns out.

At this stage, our wedding chest for money looks like this...

Tip number 2:
If you feel that the lid of the chest turned out to be heavy and constantly “trying to fall off” when you open it, then before pasting the chest from the inside, glue a piece of ribbon on one side of the inside as in the photo. Try to find the position of the cover in which it is already "leaning back" and in this position we glue such a ribbon. After that, you can safely begin to glue the chest inside.

I thought that my cover would not “fall off” anyway, so I removed the ribbon and began to paste over the inside with the same wallpaper. If you want to tinker - you can trim it from the inside and with material - it turns out beautifully, but a little more fuss.

How to glue - I think it's not worth going too deep. I will make a cut for envelopes later - when the glue dries.

Now we cut off a cardboard strip (I have about 5 cm wide and long = 2/3 of the sidewall width + front wall width + 2/3 of the sidewall width).

"Trying on" from the inside ... as in the photo. The cardboard peeks out about 2 cm above the edge of the chest.

I also pasted this cardboard box with the same wallpaper, moreover, so that the "seam" was at the bottom.

Approximately to the middle I coat with glue and glue it to the inner wall (s) of the chest.
I cut a hole for the envelopes with nail scissors ...

I got out of the "bins" all sorts of things that are associated with the wedding ...
I glued it with a hot gun, added doves and hearts ... and ...

The money box has become an almost indispensable attribute of a traditional wedding celebration. It can be purchased at many souvenir shops or bridal salons. However, the most interesting thing is to make this accessory yourself. This will give it a touch of originality and individuality. Let's look at how to make a beautiful do-it-yourself wedding money box.

The purpose of the chest

Now it is customary to give money to young people for a wedding. For the convenience of collecting donated financial amounts, use beautiful boxes or special boxes. They are a kind of symbol of the future financial well-being of a young family.

With the collected funds, the newlyweds can independently purchase for themselves what, in their opinion, is necessary for them. family life. Also, such a gift is very convenient because guests do not need to rack their brains over the question of what to present to the young at the wedding celebration.

According to old belief, at the wedding it is forbidden to give money into the hands of the newlyweds. This can cause them financial trouble or bring them some kind of trouble. Therefore, a special chest is useful to collect money.

Where to begin?

To make a chest with your own hands, you will need your own imagination and a certain amount of free time. Such an attribute must be done carefully and with love, as it will become the central element of the celebration and will symbolize the future treasury of the newlyweds. By investing your whole soul and good intentions in its manufacture, you can attract financial well-being to the family.

Before you start making a chest for money, you need to determine:

The shape of the future chest for the wedding: square, rectangular, in the form of a barrel, heart, etc.
Product color and size.
What materials will be required to make this holiday attribute with your own hands.
Associated decor.

Choice of color and shape

A wedding chest can have any color design ranging from white to black. It all depends on the wishes and preferences of the heroes of the occasion. However, if this accessory is made for a specific purpose, it is necessary to choose the right color for it:

If the chest is used to raise money for the future son, this accessory must be made in blue or light blue.
If funds are raised for a future daughter, shades of pink should be preferred.
If the money box is for fundraising Honeymoon, it should be bright and colorful.
If this attribute simply acts as a family bank, it is made in white or another neutral color.

For the future son
For future daughter

In addition, depending on the purpose of collecting money, a certain shape of the chest for the wedding is also chosen:

For future children - in the form of a stroller or cradle.
For travel - in the form of a car, plane or map.
For home, car, etc. - in the appropriate form, illustrating the desired object.

Materials used

A wedding chest can be crafted from the following materials:

For
decorating wedding chests, the following materials are needed:

colored paper, thick foil, etc.;
gold and silver strong threads;
fabric for drapery;
beads, pebbles, shells, rhinestones and sequins.

From additional materials will need:

scissors;
needles with strong thread;
stationery knife;
simple pencil;
quality glue;
transparent tape;
ruler.

In addition, inspiration and a good mood are needed for the whole process.

It should be noted that the quality of the selected materials directly depends appearance and durability of the wedding accessory to collect Money.

For example, high-quality glue will allow you to securely fix the decoration on the box, thereby preserving it not only for the duration of the celebration, but also for a longer period.

After the desired shape of the future wedding box has been selected and all the materials have been prepared, it is necessary to proceed to the next stage - the search for a scheme. It can be easily found on the Internet on specialized sites. Here are both schemes of standard rectangular wedding accessories, as well as very unexpected and interesting options.

To save time, you can buy a ready-made box of the material you like or just use a regular small shoe box. Having made a slot for banknotes, as well as decorating it with ribbons, flowers and rhinestones, you can get a very attractive family bank for a wedding.

How to make a chest from a regular cardboard box

You can make an ATM out of the box with your own hands as follows:

First you need to give the lid of the cardboard box a bulge. To do this, longitudinal grooves are carefully drawn along its surface with the help of a clerical knife. In this case, care must be taken not to cut through the cover through, otherwise it will no longer be suitable for further use. Longitudinal grooves will allow the cardboard to bend and take on a semicircular shape.
Both ends of the semicircular lid are fixed to the sides of the box with adhesive tape and additional cardboard. As a result, the box should take the form of a chest.
Next, you need to close the side gaps of the box, formed after bending the lid in the form of an arc. To do this, cut out thick cardboard the necessary figures, the dimensions of which coincide with the dimensions of the obtained gaps. The cut out cardboard is attached to the sides of the chest for money with the help of transparent tape. The result is a composition that has the shape of an arch. In addition to adhesive tape, you can use a stapler with paper clips to securely fasten the cardboard.
The next step is the easiest, but at the same time
the most responsible. In the middle of the concave cover, it is necessary to make a cut 5–7 mm wide. It is intended for cash, so its length should be sufficient for the bill to easily fall inside the box. It is best to calculate the cut in such a way that an envelope can pass through it freely.
Now you can move on to the most pleasant and creative stage - lining and decorating the wedding accessory.
First you need to measure all the parameters of the box and the curved lid. Then, using the data obtained, it is necessary to cut out the desired piece of fabric separately for the lid and separately for the bottom of the box.
The lid is carefully sheathed with a cloth, and then they move on to the rest of the cardboard chest. After that, it is necessary to cut the fabric at the location of the lumen for funds. You should not rush at this stage, since the appearance of the chest for the wedding will depend on the accuracy of the execution.
Next check
cover cut. To do this, you need to take an envelope and
try to put it inside. If this action is difficult, it is necessary to increase the incision.
After a clearance for money has been made, the edges of the fabric are processed with a lit match so that the threads do not unravel and arrows do not appear. In this case, you should be careful not to inadvertently burn the entire cardboard structure.
The last step in making a chest for a wedding with your own hands is decorating it. Here you can fully express your imagination and creativity.
To decorate a box for a wedding, you will need various materials: shiny threads, shells, ribbons, lace ruffles, rhinestones, small mirrors, sequins, etc. You can also use artificial precious and semiprecious stones. However, when performing this stage, care should be taken not to overdo it and not turn the box into a tasteless accessory, decorated with incompatible with each other decorative elements. Therefore, to decorate the chest with your own hands, it is advisable to choose no more than three elements, for example, lace braid, satin ribbons and decorative pebbles of matching colors.

Wedding chest from a cardboard box - video

chest decoration

A handmade wedding box can be plain or combine several colors that look harmonious with each other. Among the most popular design options: the bottom of the product is made plain, and the top is bright, with various decorative elements.

Start pasting the box should be from its side parts, smoothly moving to the lid. To do this, you need to take high-quality glue that can securely attach fabric, metal and plastic to a cardboard or fabric surface. Do not neglect the quality of the glue, as an unreliably attached part of the chest can fall off at the most inopportune moment.

When decorating a chest, you can use the following tips:

It is recommended to decorate the sides and docking points on the chest satin ribbons, the color of which is combined with the shade of the lining fabric.
To decorate the chest, you can already use ready-made options who offer wedding salons and craft shops.
The lid of the jewelry box should not be too heavy, otherwise it will begin to sag inward.
A win-win would be to use contrasting colors and shades, such as white fabric for lining the product and red ribbons for decoration.
The sides of the box can be decorated with photos of happy newlyweds.
For decoration, you can use original jewelry: small branches of trees, dried grass, flowers, leaves and berries. Thus, you will receive not only interesting composition, but you will also be able to surprise guests with your skillful handicraft.

You can make a beautiful and original chest for money for a wedding with your own hands. To save your time and protect yourself from possible failure, you can do bridal accessory from a cardboard shoe box and decorate it with blanks purchased from a specialized store. It will take no more than two days to manufacture and decorate such an attribute.

If you are a professional craftsman, then you can give them to your loved ones or relatives for the holidays. Now I'll show you how to make a money storage box and detailed diagram I will demonstrate. We have already created, but this one will be more universal. The master class is long and you will spend a lot of work, a lot of material, as well as time. This craft is for people who have at least an average level of skills. Be sure to do everything step by step as I will tell and do not miss anything. In the future, when you learn, you can add something from yourself.

In this box you can store small things, money, jewelry, photos and so on. I advise you to buy only high-quality material, since the gift should look very rich.
All the materials that we will need will be presented during the manufacture of crafts. Most importantly, you need cardboard, paper, scissors and glue. The thickness of the cardboard is 1.73 mm.

How to make a money storage box:

Here is a diagram to start, such details need to be cut out of cardboard. First, let's do the markup.

Then we cut out these parts from cardboard.

First you need to glue all the existing parts of the cardboard. We apply glue on the edge and assemble the boxes.

First, glue the elongated walls. Glue I took PVA.

Short walls should clearly enter, if they do not fit, then we undermine them a little. And apply glue on three sides.

Now we need to cut out such details from plain paper or craft paper. With the help of them, we will glue each edge and it will be denser.

Using a brush, smear the glue on the strips.

Now we glue the joints from the inside of the frame that we made.

Now you can trim the joints of the cardboard a little, take a large female nail file and wield it.

Now we smear the outer side with glue to glue the boxes with a leather substitute.

To do this, prepare a strip of substitute leather measuring 610x75 millimeters. It is necessary to glue one that would leave a small but equal distance on the right and left.

When we pass the corner, the fabric needs to be slightly stretched.

This is how we end, there must be an extra piece left.

We cut off the extra piece so that both joints lie beautifully at the top, and at the bottom it doesn’t matter at all.

Now let's work on the corners, they need to be cut. To do this, turn the boxes over.

Lubricate the protrusions with glue and bend.

We bend each separately.

Now the bent parts need to be pressed a little so that the gluing is better.

Here we have such a bottom, it is ready.

Turn the box over and cut off the corners at the top. You need to cut off just a little bit.

We bend the protrusions again one at a time, having previously lubricated them with PVA glue.

The joints of the corners should also lie close to each other.

The joint in the middle also fits neatly.

And again cut out of cardboard such details as shown below.

Now we cut off a piece of leatherette which has dimensions of 375x200 millimeters. Gently spread glue over the entire surface with a brush and put cardboard there. Definitely in the order in which they were cut.

Now we cut the unnecessary corners like this, so that when they are bent, they also lie joint to joint.

Then we apply on the edges of the leather substitute thin layer glue.

And we bend the edges, gluing them to the cardboard.

Be sure to go around the entire perimeter and seal the bonding.

These are the gaps that must be there.

Again, I repeat, pay more attention to the corner joints.

They must be careful.

The lid for the box is ready, let it rest and dry.

Now you need to embed the magnets in the box. On the inside, we cut out a place for them, just remove a small layer of cardboard.

We do this on both sides, the magnets will not be visible from the front side.

Drop some superglue for the magnets.

We insert the magnets and wait a couple of minutes until the glue dries.

Now we put the opposite magnets on the outside, this is easy to do.
This is done in order to measure where the opposite magnets will be located from the side of the cover.

Draw magnets with a marker.

We put the lid on the box and finally close it, the marker will be printed on the lid and you will see where these magnets need to be attached.

Don't forget to set the polarity of the magnets correctly, you need them to pull together, not repel. On the lid, we also remove one layer of cardboard and glue the magnets there.