How to make a strong sword from paper. How to make a paper sword with your own hands

How to make a sword out of paper for games, theater for young spectators, or as a gift? To provide a useful surprise for your child if he is interested in knightly tournaments or playing pirates, as well as to create a theatrical attribute for a young actor, you may need to make your own sword from paper raw materials.

Games with a blade made of cardboard or parchment are the safest for the life and health of children, as they are usually used in very active games, where the risk of getting different types injuries

By using several sheets of parchment, it is quite possible to make several types of weapons:

voluminous sword;
katana;
blade made of tubes;
flat product;
origami style cutter.

Origami is a paper folding technique that is very common in the east and has gained great popularity in almost all countries. modern world, from children to pensioners.

This style of folding is distinguished by a sufficient level of simplicity and strength of the finished product. This allows you to use it without any age restrictions.

Step-by-step creation algorithm

How to make a paper sword on your own? To create an origami-style product, you will need to take a sheet of parchment of the required format and then:

You can make a samurai katana sword in the same way. A katana is a long blade common in Japan, used by samurai during combat or to defend their own honor.

In order to decide how to make a katana from paper, in the stationery department of the store you will need to select a sufficient sheet size to obtain finished product size required for a particular child.

If it is not necessary to adhere to authenticity appearance, that is, another simple way to make a sword out of paper with your own hands. This option for gluing fake weapons is a blade made from parchment tubes. It is created as follows.

Often the material for making swords or sabers is thick cardboard. The algorithm for creating a sword from cardboard is quite simple. It is important to correctly develop a diagram or create the correct stencil that will be applied directly to the cardboard. Then the figure required by the manufacturer is cut out of a single sheet, which can be complicated by forming slots in order to more conveniently and realistically position the blade handle.

Volumetric design

In cases where a sword is needed as close as possible to its actual form, the most suitable option will glue volumetric version. To properly understand how to make a blade from stationery materials with your own hands, you will need:

To with my own hands To create this or that fake weapon product from parchment raw materials, you can and should involve the children themselves in this activity. Cutting, gluing and painting can have a very positive effect on general development skills, including motor skills, as well as improve mood and practice the knowledge your child already has.

It will be very useful to involve the youngest owner in the design of the craft, since only a child’s imagination can create a paper weapon that is unique and most attractive to a particular child.

Wooden raw materials can also be used to create toy weapons with the most realistic design.

Titanium has nothing to do with a paper sword.

Attention, TODAY only!

Almost every male representative, from a naive child to the father of a family, has a genuine interest in ancient Japanese weapons. Therefore, you can imagine how much fire, excitement and delight will light up in the eyes of anyone who tries to turn into a real gunsmith. And it doesn’t matter that the role of steel will be played by several paper sheets. No less delight will surround the one who receives as a gift such a weapon, which in appearance will differ little from the real one, repeatedly hardened in fire. To make a real samurai sword out of paper, there are many ways.

Almost every male representative has a genuine interest in ancient Japanese weapons.

Excursion into history

Ancient warriors armed themselves with a large Japanese sword with a two-handed handle, better known in the Land of the Rising Sun and among experts as a katana, at the turn of the 12th-12th centuries. Before falling into the hands of a samurai, the weapon had to pass a long way manufacturing, hardening and spiritualization. It was the last sacrament that made the sword truly sacred.

The katana was made over four eras. There are 4 known designs:

Kato (until the 16th century);
Shinto (XVII century);
Shinshinto (XVIII-XIX centuries);
Gendaito (modern sword).

To this day, gunsmiths make these swords exclusively with their own hands without using modern technologies. Each era's katana has its own texture, blade color, and combat properties. Kato has blades dark gray color and polishing to a matte, velvety finish. The blades of Shinto and Shinshinto are lighter and shiny. These differences are not due to the loss of ancient knowledge, but to the use of different raw materials, which, in turn, changed the combat qualities of the weapon.

The structure of a real Japanese sword

In order to achieve perfect historical correspondence in your work and have a sword in your collection that is like two peas in a pod, you should start making it by studying the structure and size of the katana. To forge a sword, craftsmen used exclusively refined steel. The blade was divided into 2 parts (blade and tang), engraved with ancient symbols, writings, and hieroglyphs. Katana is a long sword, it was created for a specific warrior. In order not to be mistaken with the length, 90 cm was subtracted from the samurai’s height. The actual dimensions of the sword are as follows:

blade 90-120 cm;
handle 25-30 cm (triple arm circumference);
blade width 27-35 cm.

The saber had a slight bend: it was calculated according to the width of the blade or made equal to it.

To make the handle, they took magnolia wood and covered it with leather. stingray. To smooth out some angularity and bumpiness, several rows of winding were placed on top. For this purpose, silk ribbons of various colors were used - black, brown, green, white (very rarely). The handle was wrapped so that there were diamond-shaped holes along the edges, that is, crosswise. It is impossible to imagine a sword without a guard, which served to protect the hand from blows and cuts. It had the shape of a cross or a disk.

It's worth learning how to make a samurai sword out of paper. The skills acquired while studying the origami technique, as well as the experience gained in making any crafts using paper sheets, will help with this.

Method one

As mentioned, a katana can be made in several ways, with or without a sheath. Finished swords can be decorated (painted, covered with silk, fabric, leather) at your own discretion, so that the finished weapon resembles the real thing as much as possible.

To make a sword in the first way, prepare:

paper cutting knife;
glue (both PVA and for carpentry);
corrugated cardboard;
culinary foil tube;
paints (acrylic, watercolor);
black ribbons and laces made of satin or silk.

First you need to make 5 rectangular blanks from corrugated cardboard

To speed up the work, a sketch of the future sword (in natural length) needs to be drawn on a sheet of paper and cut out so that it can later be placed on a cardboard base. Let's move on to a practical consideration of the question of how to make a sword out of paper:

To begin, make 5 rectangular blanks from corrugated cardboard. Determine the length yourself (as the ancient masters did), and make the width no more than 5-7 cm. In order for the blade of the future sword to be as strong as possible, the blanks must be positioned correctly, alternating strips of corrugation (3 parts should have horizontal lines, 2 parts should have vertical lines ). You need to place them alternating directions, one on top of the other. The blanks are glued together with a PVA compound and placed under a heavy press for 2 hours to obtain a good, strong connection.
Next, place a paper sketch-blank on the corrugated cardboard, outline it and cut it out. There will be a noticeable wavy layer around the edges, seal it with wood glue and let it dry for at least 12 hours and paint it with silver paint.
To make a guard, take 8-10 sheets of thick paper, cut disks out of them and glue them together. Be sure to let it dry and only then make the cut. the right size to put it on the blade. The guard can be pre-decorated with Japanese ornaments.
The handle is a regular tube of culinary foil. You need to insert a ready-made blade into it. If its width is greater than the width of the tube, make a couple of horizontal slits in the latter. All that remains is to paint the weapon. The handle (tsuba) should be gold, the guard should be black, and the blade should be silver. The final touch is tsuba braiding. You need to place the silk cord very carefully, crosswise, so that the golden diamonds are visible on the edges of the handle.

The final touch is tsuba braiding

Not only samurai weapons can be made this way. Using the technology of gluing corrugated cardboard, you can put a sketch of any blade on it - Scandinavian, Russian, Teutonic, even fantasy. Therefore, if after watching Marvel movies your son wants to play superheroes or supervillains, you will know how to make a titanium sword out of paper. Just don’t forget that it will be much more enjoyable to do it with your child.

Method two

The second manufacturing method does not involve a guard: after all, you know from history that such swords were also used by Japanese samurai. For creative process stock up:

paper (a lot of it);
newspapers (one is enough);
scissors;
PVA glue;
knitting needle;
paints.

The second method involves making a sword from plain paper, and not from corrugated paper, so there should be many layers in each workpiece (10 minimum).

Therefore, you need to estimate in advance how much paper you will need for the craft, and stock up on it.

The second method involves making a sword from plain paper

Define desired length blades and cut about 10 blanks 6 cm wide from paper sheets. The sword (blade) will be made of two halves, so each of them needs at least 10 strips. Glue them together (one on top of the other). When both parts of the blade are dry, carefully cut it out.

Now start joining the halves.

On a note! To make the sword durable, you need to glue tubes between them (at the edges).

Make them from newspapers. To do this, take a sheet and cut it into 4 strips lengthwise. Next, take a knitting needle, place it on the edge of a newspaper strip at an angle of 20° (diagonally) and twist the tube. It should be long. Flatten the finished tube a little and seal the edges with glue. Make 3 more and attach them all to both ends of the blade (on one of the blanks). Glue the other half on top. The blade is ready.

Also make a handle (two halves of 8-10 layers). Its width should be slightly larger than the blade. Glue both halves to the part of the sword where the handle is supposed to be. Now you know how to make a ninja sword from paper and newspapers. All that remains is to paint it (the blade is in silver color, handle - black). When the paint dries, decorate the weapon as you see fit. You can safely go with him to fight bandits and injustice.

Good afternoon Today we offer you a master class on origami - how to make a sword out of paper.

To implement this rather complicated scheme, you will need patience and a piece of paper. square shape. Or you can take A4 and cut it to a square.

DIY paper sword instructions.

1. Taking a sheet of paper, first fold it diagonally in one direction, then in the other. Next, fold horizontally and then vertically. In order for the sword to be smooth and neat, carefully ironing each fold of the origami.

2. Now you need to fold the origami, turning it into a diamond, fold the triangle, with the left and the right sides There are fold lines, we place them inside the triangle and we should get a rhombus.

3. We fold the side “wings” of the rhombus, you get two triangles, as in the picture. Now we open the resulting triangles back and hide them inside the “wings” along the fold lines of the diagram.

4. Let's expand the resulting structure so that you get a rhombus from the “wings”.

5. Iron the fold lines well; you can use a plastic card.

6. The upper triangles of the rhombus are first left, then right, carefully folded in half and again carefully ironed the folds.

7. We turn our origami over on the other side and fold the rhombus so that we get two triangles, as in point No. 3.

8. We lay out the triangles back and bend them along the fold lines inside the left and right sides, approximately as we did in point No. 4.

9. We turn the origami over and bend the side corners towards the middle of the structure.

10. We turn it over again - here we take the right and left corners, separating the sheet (since we have two layers on this side) and fold it towards the middle, it should look like in the picture.

11. Let's turn the structure over and expand it. Next, we suggest you turn to the video, since the picture cannot describe it in such detail. Let's unfold the folds. We take it to the side: opening, folded to the center, first the right, then the left part.

12. We combine the lower parts of the triangles with the origami verticals.

13. Along the fold lines we fold the triangle sticking up and press it back down. We do the same action with the other side.

14. We make a handle - we move the lower corner of the structure to the right and fold it diagonally.

15. We repeat the algorithm of actions on both sides - we get the first part of the handle.

16. Don't forget to iron all fold lines. Let's turn the origami over again to the other side. Watch the video.

17. At the bottom of the sword, turn the corners towards the center.

18. We form the second part of the handle - bend the corners up.

19. Congratulations, the paper samurai sword is ready for battle! If, while creating an origami sword, you have questions about how exactly to bend or unfold the structure, then you can familiarize yourself with the diagram in detail and step by step in our video instructions.

Do you know that doing origami with your child is a very useful process. For example, because it develops fine motor skills in children. And also fantasy.
Color a paper sword together with your own hands: the handle dark color or bright, and the blade of the sword is either silver or gold. It will look much more interesting.
Can be used initially colored paper. Wrap the blade in foil.
This sword is perfect for children's games of various warriors, knights, samurai.
The sword is completely harmless and is not capable of injuring a child, his friends or parents.

To play with a child interested in knightly battles, or as a theatrical prop, you may need a sword. Of course, a wooden saber or blade looks more impressive, but the process of manufacturing such a weapon will take quite a lot long time. It is much faster and easier to make a sword from paper or cardboard, especially since playing with it will be much safer for a child.

We glue a three-dimensional sword out of paper

To make a sword out of paper we will need:

thick sheet (preferably whatman paper or cardboard);
glue (it can be replaced with a stapler or tape);
stationery (pencil, scissors and ruler);
colored paper or foil for decorating the finished sword.

Scheme for making paper weapons

Main part. The thicker the paper, the stronger the sword. To ready product did not bend, it needs to be made in relief, for this the part on the cut should come out diamond-shaped. We fold a rectangular sheet of the desired width and length lengthwise like an accordion to make 8-9 longitudinal strips of equal width. Eight of them fold into each other, and the ninth will serve for fixation. After smearing glue on 4 edges, fold the sheet bend over bend.

Fixing parts. To ensure that the main figure does not unfold and is stronger, it is necessary to make fixing parts. To do this, you should make a drawing as shown in the figure, and the side of the edge of the main part should be equal to the length of the side of the fixing part (a1=a2). You need to make two such diamonds to secure them at both ends of the main workpiece.

The edge of the sword. We make it from a separately prepared pyramid with a rhombus at the base, guided by the drawings. We will glue it to the fixing diamond on one of the sides of the future sword.

We connect the details. We connect the main part of the sword with two diamonds, gluing them on both sides of the workpiece, and the tip with glue.

Sword handle. Square sheet paper, the length of the sides is 4*a1 (see Fig. 1), we wrap it according to the drawings to form a corner. We glue one edge and try it on to the main sword blank, making cuts at the tip of the corner along the fold lines. We wrap the edges outward, and, smearing them with glue with inside, fix it on the main figure.

Decoration. We wrap the blade of the finished sword with foil, carefully wrapping its edges at the tip of the tip. We align the edges and glue the joints. We decorate the hilt of the sword with colored paper or make an applique.

So we made a beautiful three-dimensional sword with our own hands using paper.

How to make a paper sword from Minecraft?

By following the simple instructions presented in the following video, you can in a great way, having spent very little time, make a paper sword from Minecraft. We assure you that it is effective volumetric product made of paper, copying the diamond sword from the game, will cause a storm positive emotions both very young and adult Minecraft fans.

We construct a sword using the origami technique

You can also make a sword using the origami technique. For this we need a square sheet of paper.

We alternately bend the sheet first horizontally, then vertically and along both diagonals. We fold the square horizontally, then vertically, after which we get a double square with a diagonal deflection. We bend the side parts of the resulting square towards the middle.

We straighten the folded parts of the figure, and then open the top layer by pulling the bottom corner. Along the inflection lines, fold the sides of the rhombus inward.

Bend the side corners of the rhombus towards the middle of the figure and turn it over reverse side. Fold the corners of the square as shown in the figure.

We place the corners in their initial position, tucking them inward along the lines of the resulting folds.

We turn the part over again. We form the blade of the future sword by folding the side corners of the outermost layer parallel to the axis towards the center, while the corners should align with the axis line. Turn the part over again and fold the wedges towards the center.

Turn the workpiece over and straighten the wedges pressed at the center. By moving the lower corner to the right, we reveal the part. Bottom part The resulting triangle is aligned with the vertical axis of the part.

Along the fold lines we fold a shape resembling a rabbit ear, put it down and form a similar part on the left side.

To highlight the handle, move the lower corner of the part to the right, bending it along diagonal lines.

Having done similar actions on both sides, we obtain a fence for the handle from the blade of the sword. Turn the part over.

We fold bottom corners products to the center, bend the rays of the fence, bending their ends upward.

The paper samurai sword is ready.

The same sequence of actions for making a samurai sword can be seen in the video:

The simplest diagram of a children's sword made of cardboard

There are very quick way, for which you will need a cardboard sheet, a pencil and scissors.

Draw the outline of the future sword on cardboard in 4 copies.
Cut out the templates and glue them together to make the product thicker.
For decoration, you can use colored paper or felt-tip pens.

Ready! You can start playing pirates!

Ninjato sword like the Teenage Mutant Ninja Turtles

To make a ninja sword out of paper, you need to prepare:

half a sheet of yellow colored paper;
half a sheet of brown colored paper.

We make the product according to the following algorithm:

Fold the yellow sheet in half to determine its middle. After this, straightening the sheet of paper again, fold its sides three times towards the middle deflection. Fold the resulting workpiece in half again.

We make the handle from a brown sheet, which we cut in a ratio of 2:1.

We bend most of the cut at both ends: on the left - up, on the right - inward. The fold width should not exceed 1 cm.

We wrap the previously folded sheet around one of the edges of the yellow blade and glue it together. We also form a handle from the remaining small part of the sheet, twisting it around the opposite edge of the yellow blank.

Cut out a small rectangle from brown paper, 2-3 times the width of the blade. We make a slot and put the blade itself through it. The result is a fence for the hand - a guard.

The ninja sword (ninjato) like Leonardo the turtle is ready!

Hidden cardboard blade for games in the style of Assassin's Creed

It will be useful for making props for a children's game of assassins. next video. Using the diagram presented in it, you can easily and quickly make a hidden assassin blade for a child from cardboard, similar to the one used in computer game Assassin's Creed.

The sword has always fascinated both bladed weapon connoisseurs and ordinary amateurs. It was valued as a weapon, decoration, relic or simply an object of art. However, today the use of the sword has become even wider - it has become an integral part of a costume, cosplay, and simply fan paraphernalia. A real sword is an expensive thing and not always available. Plus, using a real sword as part of a costume can be problematic due to its heavy weight or lack of authenticity. There are many schemes for this case and teaching aids(tutorials) on how to make a sword out of paper.

Origami: simplicity and beauty

One of the most popular, but at the same time complex techniques The art of making a paper sword is origami. This guide took only the basics of origami, so as not to complicate the creation process too much. Depending on the size of the desired weapon, select the desired sheet of paper. This guide is focused on A4 as the standard paper size. Cut the sheet to a square - you should end up with a regular rectangle with equal sides. Multi-colored sides of the paper will allow you to better navigate. In our case, pink is the face, and purple is the back.

The result is not a traditional Asian blade for origami, but a sword quite close to current trends.

You can use black and silver paper to make the sword more realistic.

To an origami sword suggesting a large number of creases and eliminates errors (otherwise it will look unaesthetic), was denser and more reliable, we recommend using thickened paper or decorative cardboard. Practice on simple sheets before creating the final version.

For a better understanding of the art of origami, you should refer not only to schematic guides, but also to videos. This way you can better understand in what places and how to crease the paper.

Minecraft: DIY legendary blade

The world of Minecraft is not only an original, but also a very attractive gaming space for the eyes. Many cosplayers or just fans want to get their hands on some kind of thing from this game - a kind of artifact that will become part of the fan image. All Minecraft swords are the same in appearance, but it is the diamond one that slightly stands out from the general series with its bright colors. He is the most sought after fan staff among fans of the game. But instead of spending money on a purchase and painfully waiting for the delivery of the treasured toy, you can create such a sword yourself.

This tutorial is designed for a half-meter long (45 cm) sword, which will make it seem very canonical and realistic. Such a blade will easily fit into the hand and can be swung around. You don't need any special skills or craftsmanship here. All it takes is a little care and patience. Print each image shown on glossy photo paper in portrait format, i.e. 20 x 30. This standard size album sheet.

For clarity, let's denote which part each picture represents:

The blade itself.
Side edges of the blade.
The first part of the handle.
The second part of the handle.
Handle side.
Finished diamond blade.

You can print the resulting pictures by cutting them in Photoshop, but if you need a larger size, then carefully redraw them in a program with a larger scale.

These sheets of images should be carefully cut out and folded as shown. Both parts and creases must be glued together with strong glue, which is designed to work with photo paper or thick cardboard.

Other swords: simpler guides

If you are just starting to practice such a unique handicraft, then it will be useful for you to familiarize yourself with the works of those bloggers who have already eaten more than one dog in this matter. For example, the famous Matita has its own channel on a well-known video resource, where it shows how to make collages of various types of weapons from scrap materials. There, this very quirky inventor demonstrates how to create a sword from a popsicle stick and much more. It will be useful for amateurs to familiarize themselves with what unusual application can find the most ordinary things or even garbage.

Sword made of cardboard and tape

Simple tutorials can teach you less confusing ways to create a paper sword. The next blade is made only from paper tubes. To do this, you need to twist 2 tubes of double-sided colored cardboard and secure them in this position. Place the smaller, narrower tube perpendicular to the first one in the place where the handle should be.

Fasten the tubes in this position with black or other tape to match the color of the cardboard, but not transparent - with it the sword will lose its solidity. Sharpen the end of the blade tube by cutting a piece from both sides so that the tip resembles a triangle. Secure with tape. Ready!

Sword from The Lord of the Rings

To make this weapon you will need not only standard set made of cardboard, scissors and glue, but also phosphorescent paint along with a piece of plastic. First, find a diagram of the sword shape or use any one you like. Print it out and cut it out on cardboard. Repeat the same with the plastic: trace the outline of the sword on it and cut it out. To work you will need polycarbonate plastic.

Fill all the edges with sealant, and then, when it is taken, make a small hole in the sword under the handle - phosphorescent paint is poured there. It will be canonical to use blue, but you can choose any color that you like. Use a syringe or a tube to fill in the paint. Make sure it spreads around the entire perimeter of the blade. Once the paint is poured, cover the hole with tape or a drop of sealant. Hold the sword up to the light. Ready! In the dark it glows amazingly and has a very mystical appearance. Don't forget to paint the handle for more realism.

It is important to make sure that all the sealant is dry before pouring the glow paint. Otherwise, the paint will spill out and the sword will be damaged.