How to make a slider design on nails. Advantages of sliders on a dense basis. What is slider design

Gel polish appeared relatively recently, but every year it becomes more and more popular among manicure lovers. This coating not only gives nails beautiful view on for a long time, but can also protect them from various external influences. In addition, on nails treated with gel, you can apply an original and unique slider design. It is a good alternative to drawn patterns on the nail plate, the application of which is not cheap. Let's figure out how to attach sliders to gel polish: design features.

What is slider design?

This type of manicure involves applying special film stickers to the nails, which depict various designs. Thanks to the thin coating that strengthens the nail plate, entire works of art are created. Wherein, women's pens they look very well-groomed and luxurious.

Nail sliders, which are stickers on water based, are one of the most popular new products in the field of nail art. Working with them is easy and simple. To do this, dip the sticker in warm water and it will separate from the base.

Thanks to a simple technique, slider design on gel polish can be done at home. In this case, you can get the same good result, as in the salon. The ultra-thin film is ideally applied to the nail, taking its shape. Sliders have a base white, so it is possible to immediately appreciate the beauty of the design by applying a sticker to the nail plate.

Types of sliders

If you decide to glue sliders under gel polish yourself, you need to study the types of these stickers:

Solid sliders are the most common type of film stickers. The design features of these sliders are that they are applied to the entire nail plate, as shown in the photo. Do not forget to step back one millimeter from the cuticle so that you can seal the film. Otherwise, the coating will begin to peel off;
Applications. This type of polish is made from the same material, but is intended for application to individual parts of the nail plate. Moreover, applications are used not only for manicures, but also for pedicures, as shown in the photo. Typically, such sliders are recommended for use by beginners, as they are the easiest to implement;
French stickers consist of small pieces of thin film shaped like a crescent. This polish has various colors and shades. However, the most popular are white French stickers, which are used to create a French manicure.

Instructions

Now let's look step by step at how to apply sliders to gel polish. The whole process usually lasts about one hour. If the master has a lot of experience, he can do this work much faster. However, the time spent on such a manicure will bring results. You can watch the detailed procedure for applying the slider to gel polish in the video.

Thanks to the gel coating, you will forget about your nails for 3-4 weeks. All this time they will be well-groomed, beautiful and protected from external influences.

Creation

Preparing nails for gel polish coating. First, you need to treat each nail separately. We clean the cuticle and remove the gloss from the plate. Next, we remove delamination, damage and other defects from the surface of the nail. Using a file, we give the nail plates the required form. Finally, be sure to wipe your nails special liquid for degreasing.

Apply gel polish to nails. For better adhesion of the coating to the nail, it is necessary to use a base in 1 layer. It, in turn, needs to be fixed under the lamp for one minute. Wherein sticky layer we will not delete. If you like more saturated color, you need to cover the plate twice with gel polish. In this case, each layer must dry in the lamp.

Watch how to glue sliders onto gel polish in the video, you can see the technique of this procedure. The sticker must be cut exactly to the size of the nail plate. Then lower it into a container with warm water, remove excess moisture with a napkin and release the film with the pattern from the base. Now we apply the design to the nail coated with gel polish.

We decorate the film with the pattern with a finishing layer and dry it in a lamp for two minutes. The sticky layer of the coating must be treated with alcohol, and the skin should be lubricated special oil, designed to soften the cuticle.

It is worth noting that creating a slider design yourself is not very convenient. Always at hand in the salon necessary tools and various cosmetical tools to carry out the procedure.

Removal

This procedure is carried out without any difficulties, so it can be done at home.

In order to remove gel polish you need to purchase special remedy. In order to speed up the process, it is recommended to first treat the nail coating with a nail file.

Next, you can use a sponge, which you need to moisten well with water, then insert the treated nail into it and wrap it with foil. It is important that all fingers remain in this state for up to 15 minutes. After this, we release the nail, and carefully remove the gel polish with a special stick. If the procedure was not successful, it must be repeated.

Causes of peeling

Despite the great popularity of the slider design, when creating it it is necessary to follow a clear technology. Otherwise, the manicure will not be of high quality. How to glue sliders onto gel polish so that they do not peel off in the future? The most common mistakes when applying sliders:

If the film is not completely dry before applying the top, there will definitely be chips;
You have not created a state of adhesion for the topcoat, so the slider and topcoat do not adhere well, as a result, chipping of the coating is inevitable;
The finishing coat must be applied 2 times. Wherein, Special attention need to be given to the ends. They need to be carefully treated with a product in order to hold the slider.

Nessesary to use quality top, which will not shrink. The film for the slider is not very thin and not very elastic, so it will peel off.

Decorating your nails with special stickers significantly speeds up and simplifies the process of performing fashion design at home. If just recently the choice of nail stickers was very modest, now you can buy modern sliders with prints that imitate artistic painting, pictures on any topic, voluminous geometric shapes. With the growing popularity of shellac, the use of sliders for nail design is becoming especially relevant, since it is very difficult for an untrained person to apply a design with acrylic paints on a gel polish coating. And you can transfer stickers to gel polish in a matter of minutes and under the top coat they will look like real masterpieces of nail art. Modern sliders differ in size, style and method of application to nails. You can easily choose stickers that suit your wardrobe the right size for long or for short nails. But the most important thing is that the fashionable slider design retains its decorative properties for as long as shellac hardened in a UV lamp.

Before applying the selected stickers to gel polish, be sure to read the step-by-step instructions for performing this procedure at home, watch video tutorials for beginners on creating a slider design on nails. If the stickers do not stay on the nails for long, then they could be stuck on poorly dried gel polish, the sliders themselves turned out to be of poor quality or simply do not fit under shellac, and another common reason is a violation of the technology of transferring the design to the surface of the nail.

♦ VARIETIES OF STICKERS UNDER GEL POLISH

There are two main ways to decorate nails with stickers, which differ fundamentally from each other. These are photo design and slider design, which are successfully used to transfer prints to shellac.

▪ Photo design.
This technology uses a very thin film with a pattern or design. This film is separated from the substrate using nail tweezers, transferred to the gel polish with the adhesive side down and smoothed with an orange stick. Unlike water-based stickers, these stickers can be easily removed from the base without the use of water.

♦ HOW TO MAKE A PHOTO DESIGN ON GEL POLISH

We prepare the nails for the procedure: give the free edge of the nail plates the desired shape, remove the overgrown cuticle layer, disinfect the nails and treat with a degreaser;

Now we apply the base coat under a layer of colored gel polish and place our fingers in a UV lamp to polymerize the base;

Apply one or several layers of gel polish to the base. It is advisable to choose a background for the sticker to match the photo design or use a light one pastel shade. We also dry each layer of gel polish in a UV lamp;

We separate the print from the backing using tweezers and carefully transfer it to the nail with a hardened coating. If required, cut out a fragment of the print according to the shape of the nail before transferring it to it;

Using a clean brush, smooth out all the folds of the sticker and polymerize in a lamp;

Using scissors with thin blades, trim off the excess edges of the sticker and trim the line of the free edge with a glass file;

All that remains is to apply a thin layer of topcoat to the photo design and do polymerization, and then remove the sticky layer from the topcoat with a cleanser.

♦ NAIL DESIGN WITH WATER STICKERS

In the photo: ideas for slider design

♦ VIDEO MATERIALS

Dear girls! We will be grateful if you share in the Comments your secrets, experiences and methods of performing a manicure at home using gel polish and nail art decor.
If you want to post your photos and video materials on the topic on the site, please write a message to us by email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it. To the main page

ALSO FIND OUT...

Every woman and girl dreams of an original, neat and stylish manicure. Many people visit beauty salons and nail studios, where they cover their nails with gel polish or extend them. But it’s not that difficult to learn this procedure and do it at home yourself. Moreover, for this purpose, many additional design materials are offered, including slider designs for gel polish.

Types of sliders

Sliders are usually called small pictures printed on a special film that is easily and quickly attached to nails as a decoration. This bright film is stored on a paper base, which is removed with water.

There are three main types of sliders:

completely covering the nail plate;
having a transparent base;
with a dense patterned base.

Sliders covering the entire nail plate

This type is considered the easiest to apply to nails. The picture covers the nail completely and is then fixed with a fixative. It could be clear nail polish for nails or top coat of gel polish.

Transparent base

This slider nail design on gel polish is attached just as easily as the above option. At the same time, it looks much more impressive in light or transparent colors. A manicure covered with a matte, velvet or velvet top will look stylish. Such drawings are distinguished by the presence of well-drawn small details.

Dense slider pattern

This type of design will significantly transform any girl’s manicure. The base can be absolutely any color. The choice depends only on the wishes and imagination of the owner of the marigolds. The top design can be decorated with sparkles, rhinestones, and ribbons.

Instructions for use

The technique of using sliders is quite simple. At the same time, there are different possibilities for gluing pictures onto nail plates. The choice will depend on the base coating (gel, gel polish, varnish, shellac, biogel, acrylic) and the selected type of slider. So, gluing the slider in mandatory includes the following steps:

Selection of the most suitable image, the basis for it. These main components must be organically combined with each other.
Preparing everyone necessary materials and tools for processing and painting nails. These most often include:

base and top coat;
colored gel polish;
file for natural nails;
orange or apricot stick;
primer;
clinser;
sticky layer remover;
sliders;
scissors or tweezers (whichever is more convenient);
cotton buds;
pusher;
glass of water.

Performing high-quality manicure.
Cutting out the necessary sliders for the design according to the size of the marigolds. The film should not extend beyond its boundaries.
Prepare liquid in a small convenient container.
Degrease treated nails and apply primer (application of primer is not necessary, but recommended).
Apply and dry the base, remove the sticky layer from its surface.
Cover your nails with colored gel polish and dry them.
Separate the drawing from the base. To do this, place the cut out element in water for half a minute. If the paper is thick, then you should keep it in water for one minute.
Separate the film with the picture from the paper and place it on the nail. Immediately it is necessary to thoroughly level the surface.
Cover the nails with top coat and dry in a lamp.

Advice! For better adhesion of the coating and the nail, it is recommended to carefully buff the glossy layer of the nail plate with a buff. The surface may become a little rough - this is even better for the stability of the manicure.

Thus, applying sliders to gel polish is completely easy. To visually study the procedure, it is recommended to watch the corresponding video.

Masters' mistakes

So, how to glue sliders onto gel polish has become relatively clear. But in your work, be sure to take into account the common mistakes of craftsmen and fans of applying gel polish with designs. This will help avoid rubbing and peeling of images.

Above we discussed step by step how to properly attach sliders to gel polish. Deviation from the instructions and ignoring any stage can lead to the fact that the slider quickly “moves out” and the entire appearance the manicure will be ruined.

The most frequent mistakes the following are considered:

Use of low-quality material.
Attaching the slider to an adhesive layer. The fact is that the sticky layer contains some oils. Accordingly, it will not be possible to attach anything to it.
No sealing coating.
Leaving pinches and air bubbles when straightening the picture. An apricot stick works best for this.

Using sliders, any covering will become spectacular and stylish. The main thing is to do everything correctly, without missing a single step, performing everything step by step in accordance with your instructions. And any girl can become the owner chic manicure without any extra effort.

In this article I will analyze in detail how to work with slider design. How to correctly apply a slider design on a nail?

We'll look at a few in various ways application, and I will also tell you a few myths that are “walking” around the Internet from various brands.

So, 1 way to mount the slider - on a wet base.

Apply a base (from any brand) to a pre-prepared nail using technology and dry it in a lamp. If you have a UV lamp, then 2 minutes, if you have a LED lamp or a hybrid, then 30 seconds.

After that, we apply one layer of any white gel varnish I repeat, the company does not matter, just dry it as usual. While our base is drying, we cut out our slider design. If you already have an oval rim, then cut it along the contour, but if you have a square one, then simply cut it along the contour and cut off the corners.

I have never used any tape or bags to cut out the outline of the slider. I'll tell you why later...

After this, we lower our slider into very warm water, the temperature does not matter, but many argue that the slider stretches better in warm water, but I always soak it in ordinary room water from a filter, at this stage it is very important not to wet the slider completely, NOT try to dip it into the water so that it lies at the bottom. Just lower it onto the surface of the water and you will see how it curls up a little at the edges, after 5 -10 seconds we can take out our slider and place it on a clean cotton pad. If you are afraid that your slider will get wet, you can do it differently and not put the slider in water, but simply put it on a wet cotton pad. This, of course, will extend the soaking time to 1 minute, but our slider will still easily come away from the substrate (the disc should be wet, water should not flow from it in a stream)

Next, we apply a thin layer, rubbing movements, retreating from the cuticle and side ridges by about half a mm, apply the base, and we don't dry it! Very important point- we move our picture onto the wet base. The most important thing here: try not to fidget over it with your fingers, a brush or something similar, just take your pusher and with a hatchet, with the nose itself, gently pull it into different sides to remove wrinkles.

If you have an extra piece of slider left near the cuticle or side ridges, it can also be easily removed after drying. There is no need to try to tear anything off or cut it with scissors, just straighten your slider and send it to dry in the lamp. If you have a UV lamp, then dry for 3 minutes, if you have an LED or hybrid, then dry for 1 minute.

A very important note: if you were unable to remove 1-2 folds evenly and they still remain, but do not affect the drawing in any way, leave them, with the next layer we will hide them and they will not be noticeable at all.

After our nail has dried, we can remove all the excess of our slider with a 180 grit file for natural nails. First, we file the free edge at an angle of 90 degrees, from top to bottom.

After this, with movements from the cuticle to the free edge, we file down the side ridges, and if we have excess near the cuticle, then with a pusher/spatula we kind of push a piece of the slider towards the cuticle, after which we clean off the remains with a hatchet from one sinus (corner) to another , they are easily removed; no force is needed at all.

While you are removing all unnecessary things, it is very important to prevent our finger from coming into contact with the surface of the slider design. If you have any crumbs, sawdust or something else on the slider, then gently brush them away without pressing.

After you have removed everything, you need to cover our nail again with the base, a thin layer, but no longer rubbing it in. If you are able to go with your own brush from the base under the cuticle, that’s great, but I always take a thin brush and go under the cuticle with it and, pulling back the side rollers, seal our slide design.

And at this stage, all your folds, if there were any, will become completely invisible. After that, we send it back to the lamp and dry it like a regular layer.

Next, we need to complete our coverage and cover it with two layers of top, I repeat, girls, two. Don’t skimp on the top, let your layers be thin, barely noticeable, but they will be there and they will protect our slider from water, chemicals and other external influences.

After which we remove the sticky layer and our manicure is ready.

If you think that the coating will look thick due to the abundant number of layers, then do not be afraid, the coating will look like a regular coating, well, maybe like a coating with leveling.

2 mounting method simplified

It is advisable to use it with healthy and strong nails. With this method, the most common complaint is about detachments or cracks in the slider design. I will tell you a few secrets of such fastening.

So, we apply the base again to the prepared nail, and thin layer white gel polish. After which we soak our slider and here I advise using the method with cotton pad Since we will not soak our slider with the base, we don’t need extra water.

With white gel polish, without removing the sticky layer, we move our slider design. You can pull it with two fingers using stretching movements from the middle to the side rollers, after which we put it in the lamp for two minutes. And this stage is the most important, we need all the water from our slider to evaporate, and this requires thermal exposure, so the lamp will speed up our process.

After this, you can remove all excess in the same way as I described in the previous method and cover your slider with two layers of top, again do not neglect the top, because the top is an excellent protective agent.

And now I'll tell you little tricks that will help you carry our slider even longer:

If your client's nails are very thin, use strengthening before white gel polish, this may be acrylic Powder, or base alignment.
The system you work on, top, base, color doesn’t matter at all, I once worked with bluesky top and base and the slider worked great. Companies that produce slider tops just want to make money.
If you are still afraid that your slider does not move well, then after you have dried the picture, take a primer or ultrabond, squeeze the brush well and walk along the free edge and make point movements near the cuticle and side rollers, do not overdo it, as the primer and ultrabond , all the same, acidic substances that can corrode our drawing.
Take a rubber-based base, since rubber is the same as rubber, it lends itself perfectly to all sorts of influences, and since our nails can bend, it will not allow the coating to crack or peel off along with our slider design.

If you follow my advice, your slider design will last from correction to correction.

Creative success and good clients to you, my dears!

Elechka Nagaitseva.

But when it is not possible to draw on your own, special stickers - sliders - come to the rescue. What is required to create such a manicure, how to use a nail design slider and is it possible?

What is a slider design for nails and what types of sliders are there?

Progress in fashion does not stand still, because last years Special nail decals are becoming increasingly popular. They are easy to use, publicly available, and do not require special skills. Of course, you can do a similar procedure in a salon, but it’s also easy to apply nail sliders yourself and stick them on at home.

All similar decor for nail art can be divided into two categories. This is important to consider when choosing the right option.

Water-based film sliders. Such models involve soaking the glue using warm water to remove the sticker from the backing and transfer it to the nail.
Sliders are transfer stickers. Working with sliders of this type is several times easier and faster; they are even suitable for creating manicures. young fashionistas. Here you do not need to soak the picture in water for some time, just carefully remove it from the backing and press it to the nail plate.

Category two: appearance

Dot pattern sliders. They are small pictures, often floral or geometric patterns, placed on a transparent film, but do not cover the entire nail. Often used in french manicure and in a situation of minimalist design on nails. It is better to glue sliders of this type onto a light surface, choosing pastel shades varnish or using colorless varnish.
Stickers with a “voluminous” pattern. These sliders require a fairly large, complete design; however, they are all on the same transparent film and require a colored base on the nails. This slider design for nails highlights 3D pictures that look great on long nails.
Drawings for the entire nail. Such decals are very convenient for creating a quick but beautiful manicure. Sticking a slider on the entire nail is no more difficult than applying a separate “dot” pattern. Such pictures are suitable primarily for false and natural nails. They cannot be used on an acrylic base or as part of gel polish application. special meaning, since the nail plate will be completely covered with the design.

Advantages of slider design and necessary tools for work

This nail art technique, available at home, does not require the purchase of any numerous special devices.

In order to work with sliders, you will need:

the stickers themselves, scissors if necessary to cut them out;
manicure tools, if necessary, pre-tidy up your nails;
a bowl of warm water if using water stickers for nails;
tweezers, orange stick or toothpick, cotton swab;
dry cloth;
top fixing coating for varnish.

In addition to the fact that sliders are easy to use due to the small number of tools and the elementary technique of transferring stickers to the nail, this nail design has additional advantages.

Benefits of nail design slider

Stickers are quite inexpensive, and there is a huge selection of patterns and pictures, and some photo studios print transfer stickers for nails based on individual sketches.
To understand how to use the slider, you only need to watch it once step by step instructions or read the description on the sticker packaging.
Such drawings are supported by regular nails up to 4 days, in the situation acrylic coating or shellac will remain beautiful manicure within a month. Also read the article about.
Nail sliders provide flights of fancy.
They are absolutely safe and do not harm the nail plates, so even children can glue the sliders. Such stickers allow nails to breathe, are easily removed and do not damage the surface of the nail plates.
Giving preference to sliders, you can use them in the situation of any nails (natural, false, artificial, and so on). The technique of how to properly glue the slider is practically the same depending on the type of nails.

Step-by-step instructions on how to stick nail sliders yourself onto regular polish, gel and acrylic

The photo below contains eight basic steps for creating a nail design using water transfer stickers, and below are text instructions:

Before using sliders, you should prepare your nail. File it down, remove the cuticle, degrease it. And then apply the selected tone of varnish to the surface.
While the varnish is drying, it is necessary to cut out the required quantity stickers.
Pour into a small container pure water, temperature not exceeding 40 degrees. The first sticker is dropped into it. Stays in liquid for up to 40 seconds.
If necessary, you can then blot the slider from excess moisture with a napkin, simultaneously moving the film with the pattern from the backing.
Then carefully attach the edge of the sticker to the nail. At this stage, you can use tweezers to completely separate the patterned adhesive backing from the paper without damaging the film.
After gluing the picture completely, it should be smoothed out with a stick or toothpick so that there are no irregularities or air bubbles under the picture.
Once the slider has been glued on, the top is coated with protective varnish.
You need to give the varnish time to dry. And also in the case of water stickers Avoid contact of fingers with water for 30-40 minutes.

If regular, non-aqueous stickers are used, then the technique does not change too much, only the points about soaking the sliders in water are excluded.

Features of how to properly glue the slider onto gel polish

The nail is prepared for the procedure (cleaned, disinfected, filed, etc.).
The main gel polish is applied, which then needs to be dried for 2 minutes using a special lamp.
The selected image is transferred to the adhesive layer.
The desired fixative is applied on top, which is again dried under the lamp for 1-3 minutes.
The sticky layer of the top base is removed.

The sticker should not be applied close to the edges of the nail plate. Even when deciding to stick a slider on the entire nail, you need to leave 1-2 millimeters from the cuticle, which can then be decorated with rhinestones or glitter polish.

How to work with sliders in the case of an acrylic base

Acrylic is applied to the prepared nail plate, leaving a small distance along the edges of the nail so that the desired sticker can then “adhere” to the nail plate.
The selected design is transferred to the nail when the acrylic is not yet completely dry.
Finally, the drawing is covered with a fixative using an acrylic ball using point-to-point movements.

Acrylic can corrode the film and paint of the picture, so you should act very carefully. The picture cannot be moved, even if it is attached poorly or unevenly. You should not make sliding movements with a brush or ball on the surface of the slider and acrylic, otherwise the coating will be smeared.

The video below clearly explains how to apply sticker sliders. It clearly shows the result of such a nail design:

What is a manicure with sliders like?

Sliders are an excellent choice for creating an attractive manicure for every day or for a holiday due to the variety of sticker options. They can be not only with patterns, but with a matte or metallic finish. You can stick sliders on all nail plates, or selectively, additionally decorating your nails with rhinestones, sparkles or other decor. These stickers are also suitable for use on toenails.

Animal print

Graceful lace on nails using stickers