Denim shorts made from old jeans. White is always in fashion. How to cut jeans to fit shorts

Many people regularly throw away old jeans, although they can easily provide the product new life. To create shorts from old jeans, choose a model that fits the wearer as comfortably and aesthetically as possible. If there are ties or holes, this is not a reason to part with the item, since in the process of work all imperfections can not only be disguised, but also turned into advantages.

Prepare the necessary materials:

Scissors or blade with handle.
Needles, preferably of different thicknesses (you can get by with one).
Threads to match the jeans, unless you plan to completely recolor them.
Sewing machine.
Chalk or other pigment that can be easily used for marking and, if necessary, washed off without a trace.

Before cutting jeans into shorts, you need to determine and carefully measure the appropriate length. The parameters depend not only on the preferences of the owner, but also on the presence of obvious defects below a certain level, and features of the design. To determine the optimal length, it is recommended to try on jeans. Once the exact length of the shorts has been determined, you should leave a few more centimeters at the edges in order to complete the stitching.

Sometimes people form a double hem on the ends of the resulting shorts to ensure durability and appearance things like from a store. In this case, 4-5 additional centimeters will be required. Mark the edge with chalk or light soap. If you decide to create very short shorts, lengthen the back and shorten the front as much as possible.

When the fitting is completed and the necessary marks have been made, you should check that they are correctly leveled by folding the jeans and checking the indicators along the edges. Once the exact parameters are determined, draw a straight line between the marks. This is necessary so that when cutting off excess, you can focus not on the symmetry of the strip, but on the evenness of the edges of future shorts. Trim the pants along the marked edge.

To ensure an even cut, you need to take very sharp scissors or pre-sharpen them.

When a piece of fabric has already been completely separated, you should not immediately put it aside. It will be needed to control the cut on the second leg. So, if the work is done carefully, you can guarantee an accurate cut level even if the owner of the item cannot draw two absolutely identical lines by eye.

Create, check if necessary and adjust the mark again. Trim the excess fabric as on the first leg.

If you have not yet practiced cutting fabric or are new to denim, especially when altering fairly thick trousers, take precautions. Cut the fabric just to the knee for practice. Constantly bend, align the fabric and check with the required parameters, carrying out regular fittings. Finally cut the fabric to required length.

Edge processing

There are several ways to style the edge of jeans. You can create a ragged edge, if necessary, just carefully fold it over to create an edge. You can use the most easy methods, and show creativity.

Fringe at the ends

This is the lightest, but aesthetic and stylish option. Process the free edge of the shorts you learned. To do this, separate several lines from the canvas in the horizontal direction. To make the work easier, use tweezers or a needle.

The length of the fringe depends on the discretion of the owners of the shorts, but it is not recommended to make it wider than 2.5-3 cm. When all the interfering threads have been removed, make the fringe as fluffy as possible with a brush, but do not deform it.

Edge decoration

It's complicated but unusual option. First prepare the template by applying the desired ( lighter is better) pattern on paper of dense consistency. Place the stencil against the edges of the trouser legs, while adjusting its position to the intended length. Use soap to outline the edges. Use a pen if necessary, but be sure to draw on wrong side.

Cut the edge to exactly match the pre-applied design.

Fold the edges and stitch them using a sewing machine. If selected denim Quite dense and of high quality, it is not necessary to bend it.

Torn edges

This is the most fashionable and popular option, so if you have enough time, you can choose it to be sure not to make a mistake.

You don't have to put in too much effort. When you do the initial trimming of the edge, most likely it will already be uneven. It is enough to simply modify its structure. Take a blade; if you don’t have one, a regular stationery knife will do. Create several cuts horizontally, rising slightly from the edge of the shorts.

Make the cuts more disheveled. You can try to form them with your hands, but it is advisable to use sandpaper. Use it carefully so as not to ruin the whole denim fabric.

So denim shorts become visually worn.

Diy-dye: dyeing denim shorts

Diy-dai can be translated into Russian as coloring or dipping. If the procedure is carried out correctly, jeans will become not only very fashionable, but also beautiful, while the dyeing technology is very simple. Everyone can do it at home.

Method 1 (using bleach)

Take bleach or Domestos. The use of gloves should not be neglected. It is advisable to dress sufficiently long clothes and cover the table or other surface on which work will be done with a waterproof tablecloth.

Follow the step-by-step diagram:

Dilute 4 parts bleach to 1 part water. If you decide to use Domestos, dilute it with water one to one. For long enough shorts, the solution should be made more concentrated.
Place in ready mixture those areas of the shorts that need to be highlighted.
Wait half an hour or a little more before dyeing your shorts. It is advisable to sometimes remove them to check the lightening effect, so that when you achieve the result you like, immediately remove the fabric from the solution. You can do it differently: first completely wet the shorts in water, and apply Domestos to those areas that should be lighter.
When the necessary areas of the item have completely gone through the bleaching process, it needs to be rinsed with water and vinegar 2 times. After this, wash your shorts.

Method 2 (coloring)

If you are going to dye fairly dark shorts, then you should not choose light shades. The exception is cases in which professional dyes are used. Then you can work in any color. You can use different tones, but it is advisable to refrain from brown and dark, as these are quite gloomy colors for summer. If you decide to dye your shorts in light shades, use bleach first and then proceed with the light colors.

You can use any dye to dye your shorts. It is usually dissolved in water in the proportion indicated on the package. The more saturated the concentration of the solution is, the more intense its coloring ability. You should not immediately overdo the consistency, as it will be too light shade You can make it brighter or darker, but to remove the saturated dye you will have to bleach the item.

Follow this procedure:

Place the jeans in soda ash, observing the dosage indicated on the pack. Using this solution, you can guarantee the safety of the paint and also reduce the intensity of discoloration of the item during the washing process.
The shorts are soaked for at least 20 minutes, then taken out and wrung out. When this action is completed, you should place the item on a horizontal, clean surface, leveling it as best as possible.
If you purchased liquid dye, you will simply need to pour it into a suitable container. Powder dye requires initial dilution, and then poured into a bottle with a stopper, ensuring proper dosing of the product.
If there are no special containers, use packaging for dyes from shampoos, conditioners and similar products. Provide yourself with the opportunity to control the quantity and quality of overflowed paint.

Video - How to Make Ripped, Studded, Ombre Denim Shorts

Carry out coloring with a specific pattern or in a chaotic manner. Work one side first, then turn the fabric over. If you need to change the intensity of the color, you can dilute the paint with water or, on the contrary, rub it firmly into the fabric. When you plan to apply a monochromatic design, it is not necessary to pour the dye into the dispenser. You can place the product in a basin, soak the shorts in it, leaving them until the optimal color is obtained. At the end of the procedure, leave the shorts on plastic wrap for at least 6 hours.

The ability to make something new and unusual out of old things is a real talent. Denim shorts will never go out of style: they are versatile, comfortable and practical. In every girl's wardrobe there is at least 1 old jeans that can be turned into fashionable shorts. And if you put in a little effort, you can decorate them effectively.

How to cut jeans to fit shorts?

You will need:

Old jeans;
Sewing machine;
Scissors;
Threads;
Needles;
Overlock;
Decorative elements.

Instructions:

Every girl has old jeans in her wardrobe that have been lost over time. presentable appearance. It's easy to make fashionable ones out of them. summer shorts, in which you can walk in the park and go to the beach.
First you need to cut your jeans. Define optimal length, arm yourself with scissors and cut off the excess pant legs. The easiest and most optimal way to find the length of the product is to attach existing shorts to the jeans, mark a line and add the width of the hem to it.
First, it is recommended to cut off 1 leg, then fold the jeans into 2 halves and cut the 2nd leg. Make sure they are even. If it doesn't work out, the shorts won't look very neat.
You can make a hem or process the cut edges of the trouser leg with an overlocker, fold it in 1 layer and stitch with a thread to match the denim or contrasting fabric. If the bottom hem is simple, add 2 - 3 cm, if double - 4 - 5 cm. It is best to first iron the hem line of the shorts or even baste it.
Interestingly, instead of hems, you can make cuffs. These are the same hems, only in the opposite direction. For cuffs, usually leave about 5 - 7 cm (depending on the desired thickness).
If you have sewing experience, it will be enough to pin the hem together. Always sew the finishing stitch on the hem of shorts on the back side, not on the right side. This will help make a neat and even seam. If you do not have experience, you can draw a line under the ruler and make a line along it.
Instead of a regular stitch, the edge of the jeans can be secured with adhesive tape, which after the 1st wash will be securely fastened and will last for a very long time.
Making a double hem on a regular sewing machine is quite difficult. Therefore, if yours does not accept thick fabric, it is better not to risk it. Otherwise, you can break not only the needle, but also the device itself.

Decorating denim shorts: methods

Finished denim shorts can be decorated with sequins, beads or rhinestones. To begin, draw with ballpoint pen pattern or design. Then, sew or glue sequins or rhinestones. It is better, of course, to sew on the pattern, then you will be sure that the applique will not come off during the washing process.

In addition, you can glue an applique or sew colored or patterned fabric onto the cuffs. This way the shorts will look very stylish and unusual.

IN Lately Denim shorts with lace are especially popular. For this you need any pieces of lace fabric. Specialized stores sell lace with a special sticker with reverse side, which can be attached to any fabric if ironed. If you do not find such material, purchase special fabric glue and use it to fix it. You can also carefully sew the lace with small stitches, after securing it with pins on the hems. The stitches should be as inconspicuous as possible on the front side of the item.

The torn model of shorts is very popular. To create them you will need a well-sharpened stationery knife or razor, as well as chalk. In order not to spoil the thing, first mark the cut lines, start delicate vertical “grids”, which can be supplemented with new cuts in the process.

After marking, be sure to try on the model; if you are confident in the design, feel free to start cutting. During this, be sure to place a piece under your trouser leg. thick cardboard or a wooden plank so as not to cut through both panels. You need to work strictly along the longitudinal threads; any movement of the knife or razor at an angle will turn the fashionable decorative cut into a sloppy hole.

Dissect and cut both longitudinal and transverse threads to the length you need. And go over the cut with a brush, you can take a regular old toothbrush. Afterwards, be sure to wash your shorts washing machine- it is she who will give the decor a finished look.

A very fashionable experiment - colored shorts from old jeans. The palette and designs can be very diverse. Before radically changing the color of a thing, it needs to be bleached. Use a spray bottle to spray concentrated bleach onto your shorts. They should be well saturated with white. Leave them for 4 - 5 hours until the paint comes off. Rinse bleached shorts well in water and dry.

Currently, multi-colored shorts are in fashion, in which shades of colors are mixed at the borders. This coloring is called “ombre”. To create this effect, you need to apply the paints one at a time, rubbing them on adjacent areas. It is better to use consistent shades, i.e. which are located among themselves on the color palette. This will make the shorts more harmonious.

As for the drawing, you can use stencils and special paints for fabric (acrylic ones are also suitable). If you are good at drawing, you can come up with a design yourself and transfer it to denim shorts.

How to make fashionable shorts from jeans?

You will need:

Old jeans;
Pencil or chalk;
Scissors;
Stationery knife;
White or bleach;
Spray;
Threads;
Needles;
Sandpaper;
Thermal rivets and rhinestones;
Glue.

Instructions:

Take old jeans and mark the future length of the shorts with a pencil. Cut the pant legs using scissors along the marked line. Place the shorts on a surface that will not be damaged by bleach. Pour bleach or bleach into a spray bottle, mentally split the shorts in half horizontally and spray the bleach on the bottom half of the shorts (front and back). When they become discolored, rinse in water, but do not wash.
Wait completely dry. Now take a utility knife or sandpaper. Make large cuts with a knife or rub the cut edges of the shorts with sandpaper. Using scissors, make holes in several sections of the shorts. They can be sheathed beautiful seam using contrasting threads or simply tousling with your hands.
Wash the shorts in the washing machine, adding powder and fabric softener to avoid the white smell. The next step is to decorate with thermal rivets and rhinestones. Place the rivets in any order you like on the shorts, place the fabric on top and iron them. Rhinestones can be glued with special glue.

How to make jeans shorts: video

Denim shorts are fashionable and comfortable clothes, which is popular in hot weather summer days. They are easy to make from old jeans that you no longer wear. By showing your imagination, you can decorate your shorts with the most different ways by creating your own unique design.

Even fairly worn denim items can be refreshed and given new life. All you have to do is learn how to properly cut jeans to fit shorts.

How to choose a model

First, decide which model you want to get in the end; it depends not only on taste, but also on the model of trousers from which you will make shorts.

Knowing how to cut jeans, you can easily make your own shorts.

What can be made from jeans?

Capri. Tube or tight models are suitable for them. Calf length. Can be worn with sandals or heeled shoes.
Bermuda. Knee length. You can make it from loose jeans, in which case you should choose the top according to your figure. Tight-fitting Bermuda shorts also look stylish, especially if they are complemented with a loose top.
Shorts in classic style. The length above the knee is on average 10 cm. It can be less or more. You can make it from products with holes. Heavily worn jeans will also come in handy.
Short shorts. Original version - skinny jeans. Can be worn on the beach with a bikini or in the city with a loose top.

You will need a little patience and imagination, and your exclusive item will be ready.

How to cut jeans to fit shorts

How to style cut-off jeans

Now we need to give the shorts a creative look. Nail scissors or an awl will help with this. They need to process the edges of the cut legs, carefully pulling out the white threads. It's white, not blue. In conclusion, you should wash the newly made item in the machine, choosing the hardest mode. The threads will fluff up and scuffs will appear on the shorts.

You can make the product without fringe. To do this, you need to fold the edge of the fabric and hem it. Those who like folds can fold the fabric again after stitching like this. This model will look more strict.

Iron the edge to secure the edge.

The effect of negligence is kept in the list fashion trends for the 2nd season in a row and applies to almost everything: from makeup to clothing. In particular, they never go out of fashion torn shorts, able to fit into almost every look: from sporty to glamorous. In addition, you can make such a wardrobe item yourself in a few minutes.

How to make ripped shorts with your own hands?

In order to make torn shorts with your own hands, in addition to the usual tools in the form of chalk and scissors, you need to find a thin and long crochet hook, which can be replaced with a gypsy needle, as well as a stationery knife, toothbrush and a razor.

Regardless of what material you start making holes in the shorts, work only along the longitudinal threads. If you inadvertently switch to transverse ones, the product will instantly break down and will only be suitable for home use or disposal. That is, from the desired area where the gap should form, only the longitudinal threads are removed with a sharp knife, and the transverse network remains intact: it is convenient to do this with a long gypsy needle or hook. To make the process easier and to avoid any unpleasant incidents, take a stationery knife and sharpen it as well as possible. He should immediately cut the thread, and not saw it.

The same effect can be achieved if you work not with a knife, but with a stationery razor. After the location of the hole has been marked, you need to go through the threads with a toothbrush, a tool to remove pellets, or simply with your fingers, breaking the transverse threads left untouched. They need to be slightly separated from each other.

If you decide that the holes should be large and there should be no threads left in them, the transverse ones are removed exactly to the edge of the hole, after which you need to singe the cut area. Or you can go over it with an overlocker, but in any case it is necessary to fix the cut. After this, the longitudinal threads can be pulled out with a needle or crochet like a fringe.

There is also interesting way creating holes in shorts, which works best with denim: it involves the presence of a pumice stone or a special grater, which is used to carry out a dry pedicure. The smaller her knives are and the higher the frequency of their location, the faster and better the holes will be made. It is necessary to rub this tool over the fabric with strong pressure. in the right place until the threads begin to thin out.

An important point that cannot be overlooked concerns measuring instruments: measurements are taken measuring tape, but markings on fabric are often done using a ruler, which gives rise to errors. This is because dividing by various instruments are not located identically to each other. Because of this, professional cutters also recommend setting aside the required values for the fabric using the measuring tape used to measure, and using a ruler only to draw an even line, if necessary.

How to make ripped shorts from jeans?

If there are no old shorts that can be used up, jeans will come to replace them. This type of fabric is the easiest to work with, since it does not require additional processing of the edge to protect it from fraying. In addition, it is on denim that various abrasions look most advantageous. To do this, you should prepare the sharpest possible scissors, a piece of soap or chalk, a long ruler and a measuring tape.

First, you need to turn the jeans into simple shorts, choosing the optimal length for them. You shouldn’t do this by thoughtlessly shortening your trouser legs: when you put them on, you’ll find that the item doesn’t fit as well as you would like. Therefore, it is advisable to find an assistant who can mark when the jeans are put on you. If no one can help, you can easily mark the hem by measuring the length of the shorts or skirt you have. But it is impossible to independently measure something that has already been put on without errors.

Depending on how short the shorts should be, the cutting line is selected. Here you immediately need to decide exactly what the bottom will look like. The most attractive look are torn shorts, which have bottom edge has a fringe, which means it is almost unprocessed. But if you want to keep it even, you need to calculate the increase that will go into the hem. The same applies to the deliberately bent upward and outward edge. In any case, do not forget that the length of the back panel should be 0.7-1 cm longer than the front.

The edge can be processed last or dealt with before the stage at which artistic tears will be created on the shorts. By classic scheme it is folded inward twice, maintaining a width of 0.5 cm, after which top line hemmed with small stitches. To create a cuff, the fabric folded outwards needs to be ironed, and only then hemmed, and it is recommended to do this manually so that the seam is not visible on the front side. If you want to leave the bottom edge untreated, it is best to decorate it with fringe, which can be created with a regular crochet hook by pulling out the longitudinal threads one by one.

Now, on the product laid out with the front panel facing up, it is necessary to make markings: to indicate the locations of future holes and their scope. It is strictly not recommended to be overzealous with the latter: when worn and during washing, the holes will spread wider, and after 2-3 times the artistically torn shorts will turn into something that can only be worn at the dacha, since there will be no whole fabric left at all. In addition, stylists remind that the larger the holes, the more volume they visually give to the legs. This should be taken into account by girls who want to adjust their figure with clothes.

Torn shorts: photos and finishing ideas

Ripped denim shorts already look stylish in themselves and rarely require any additions, but many girls lack a certain individuality in such a thing, which can be added through interesting decor. In particular, lace is very popular today, which can play even with such a controversial material as denim. This combination of tenderness and sporty negligence has long been seen at the shows of leading designers.

Lace can serve as a lining, or it can become an independent finishing detail. In the latter case, it acts as a cuff or fills in the missing area: for example, if from side seam part of the fabric was cut out - lace is put in its place, carefully attached to the front side. If the material is used as a lining, most often its cut should fill the entire panel from the wrong side, since otherwise the seam will be visible from the front side, which will spoil the appearance of the product.

Controversial, but still current trend on the world's catwalks - pockets peeking out from under the bottom edge of short, torn shorts. It is most interesting if the material of the pockets differs from that used when sewing the main product, and the holes are neatly located on them. To get a similar wardrobe element, the bottom edge of the shorts is cut as short as possible, and the pocket itself can even be lengthened by making a fake lining on the reverse side, choosing for it contrasting color, texture or fabric.

In addition, torn shorts can be decorated with more conventional details such as rivets, beads and ribbons, as well as paint. Today, this method is in high demand: at home, both complex gradient dyeing of fabric and the simpler application of stains and drops randomly located on the fabric can be done. Any of the options, with the proper imagination, turns simple torn shorts into a designer item.

Judging by the trends dictated by famous fashion houses, ripped shorts will not lose their popularity for a long time, so be sure to try adding them to your wardrobe. And even if by chance it turns out that you made the holes too large and they began to diverge, you can always cover some area with an interesting patch, which will only add individuality to your item.

Sometimes you need to shorten your jeans. This is necessary if the model is too long. In addition, old jeans can tear or become boring. Then you can easily turn your pants into shorts, capris or breeches. In this case, you need to trim and hem the products at the bottom. But this must be done competently and carefully, so that new clothes looked beautiful and aesthetically pleasing. Let's learn how to cut jeans correctly.

If you want to cut jeans to fit shorts, pay attention to the model of clothing. It is better not to use stretch fabrics or baggy pants. In the first case, the shorts will turn out to be too narrow and tight, and in the second, they will be too big and awkward.

A suitable option would be thick denim and jeans containing over 90% cotton. When working with thin denim, be careful not to accidentally tear the fabric. Before the process, wash and dry the products. How to wash jeans correctly so that they do not shrink or stain, see.

How to cut jeans to fit shorts

First determine the length of the future product. Capri pants are cut at the calf muscle, breeches are cut just below the knees, and Bermuda shorts are cut to the knee. Determine the length of the shorts at your discretion. To determine your circumcision limits, put on your pants and stand in front of a mirror. Draw a clear line using a chalk, a piece of dry soap, or fasten a pin.

After this, lay the product on the table, using a ruler, draw a cut line evenly and clearly. Then make a margin of 1-1.5 centimeters and draw the line again. Trim the jeans along the bottom outlined border. Trim each side separately. Do not cut the back and front of your trousers at once!

And proceed to processing the edges. The edges at the bottom can be overcast by hand or on a sewing machine. The easiest and in a fast way will leave frayed and slightly torn edges. In this case, you can make stylish shorts with fringes or ripped shorts.

Determine the cutoff limit only by putting the jeans on. Otherwise, the shorts will turn out too long or short. Always trim products with a margin of about 1-1.5 centimeters. To cut the shorts straight, cut the front and back sides separately.

How to hem shorts

To make the job easier, turn your denim items inside out and iron them. Then, when hemming, the trouser legs will not move;

To hem items, choose threads that match the color and type of fabric;

Turn the product right side out, fold the hem to the desired thickness and height, iron the product;

To hide the disheveled cut edge, fold it inward and also smooth it with a hot iron;

Sew the hem first with a basting using small stitches, and then go around sewing machine. Then you will get a neat seam;

Without sewing machine It is better to overcast and hem the edges from the wrong side. In this case, the material is folded to the wrong side and then hemmed. Such the method will work and for those who don't want roll-up shorts;

If you're hemming your shorts and want to give your shorts a fashionable, worn-in look, rub the seams with a pumice stone.

How to shorten and hem jeans

If you need to hem too long jeans below, determine which piece needs to be hemmed. This is determined in the same way as in the case of shorts. Put on your pants and stand in front of the mirror, measure the desired length. If you need to fold a small piece of fabric about two centimeters high, you will have to rip the bottom. If the piece is larger, there is no need to rip off anything.

If necessary, steam the bottom and lay out the pants on the table, draw a hem line of the required length without reserve and fold the excess material inward. Then carefully iron both the front and back of the jeans along the new hem line. On the hem on the wrong side, mark an allowance of three centimeters and cut.

The allowance is folded over and ironed again, and then stitched along the wrong side at a distance of 1 mm from the fold of the allowance. This method is suitable for hemming shorts, capris and other types of trousers with inside without a gate on the outside.