How to make collared shorts out of jeans. How can you decorate denim shorts? Fashionable shorts from old jeans

Hot summer outside. It's time for vacations and vacations, relaxing with friends by the water or in nature. But how can you imagine summer without shorts? They have firmly taken their place in youth fashion. We will tell you how to make cool ripped shorts For summer walks. You will look naughty and stylish in them!

Choice of length

To make ripped shorts, it is best to use a denim product. For this, old shorts or jeans are useful. Before starting work, try on the product from which you will make torn shorts, and mark the desired length with chalk. Having prepared right tool feel free to get to work.

Tools

In the future, for work you will need:

nail scissors;
large scissors;
tweezers;
stationery knife;
chalk or pencil.

Edge processing

To get started, take shorts or jeans to be redone. Lay out for convenience on a flat surface. Cut your pants to desired length according to the previously mentioned measurements. An important point is to use scissors as little as possible. If the fabric lends itself easily, it is better to tear off the excess with your hands. In this case, the edges will turn out uneven, and it will be easier to work with them further. So, both legs are trimmed, you can start processing the edges. With sharp nail scissors, start pulling the white threads from the bottom, row by row. Try to be careful not to tear them. This is approximately twenty rows. The number of threads pulled out depends on how torn and unkempt the shorts you want to end up with. If the fringe made from blue threads seems too long to you, cut it off with large scissors. When all the edges are processed, proceed to decorate the shorts.

decoration

Method 1

Lay out the shorts and use nail scissors to make a few longitudinal cuts in front or back. The length and number of cuts depends on your taste. Start pulling out the white threads, being careful not to break them, in the same way as when processing the edges. Next, draw out the blue threads. The final step in this process is washing. To enhance the worn effect, shorts should be washed in washing machine at the highest speeds. Then dry them.

Method 2

Having laid the shorts on a flat surface, mark with chalk or a pencil the places where you will make cuts in the future. Place thick cardboard inside the pants so that you do not accidentally damage the fabric during work. Using a clerical knife, make cuts along the drawn lines. Then process the cuts in the same way as in the previous version. To give the torn parts more natural look, go around the edges with nail scissors, lightly scratching them. It also does a great job with this. sandpaper. Rub the edges of the cuts with it - and the fabric will look rather worn and worn. So all scuffs will become even more natural. Well, that's it, your shorts are ready.

As you can see, making ripped shorts is very easy. It will not take you much time and will not require large expenses. The process is creative and exciting. You can easily make the shorts of your dreams!

Breathe in old thing second lifeWe bring to your attention creative ideas how to make jeans trendy shorts, because quite often a situation happens when excellent, but rather boring denim trousers are lying around in the closet, which it is a pity to throw out and there is no longer any desire to put on. It is in this case that you can turn them into a new stylish wardrobe item without any fear.

Planning stage

The shelves in stores are littered with a wide variety of clothing samples for every taste and style, but sometimes you want to find something like that. So why not create an exclusive little thing with your own hands? Handmade is relevant and unique, such things have always been valued above factory production. Each model has its own unique zest, which, with a skillful approach, will easily help emphasize the dignity of the figure.

It takes very little to get the job done. If you plan to simply cut off the leg, leaving a torn edge, nothing else is needed except for threads with a needle and scissors. But the choice of the latter should be approached carefully: ordinary ones are not always able to cut thick denim, it is better to purchase large, tailor's ones.

To make the cut neat and the same on both legs, stock up on a centimeter ruler and chalk. If your plans are not to leave a torn edge, but to stitch the product beautifully, you will need a sewing machine here.

Advice! If you do not have chalk - it does not matter, you can get by with a bar of ordinary soap. It also paints well on the fabric and is perfectly washed off in the washing process.

The fashion trend of the coming season is the painted edges, this will require acrylic paints for fabric, a stencil and a special marker.

To ennoble future masterpiece, you can buy interesting stripes, appliqués, laces in sewing accessories stores.

The last but the most important detail are old jeans. What pants are suitable for this? If you want future shorts to effectively fit your ass, pants should also be tight. But keep in mind that stretch is an unsuitable material, due to its special elasticity, the product from it will turn out to be too frank.

Depending on the length and style, shorts are classified as follows:

Capris - slightly shorter than standard pants, cut off in the calf area. This model looks great with heels and sandals. Tight pants are best for them.
Bermuda - incredibly stylish, everyday option for summer, their length reaches the level of the knee. Loose-cut jeans are suitable for such a transformation.
Classic - about 10 cm above the knee. They can be made from both narrow and wide jeans. All sorts of holes and scuffs on the pockets and on the front of the thigh are welcome.
Short - beach option with an edge of about 5-8 cm. Wide models of pants are not suitable for their manufacture, since the hips will be too bare. Pruning should be approached with caution, because it is very easy to miss the size.

Trimming the pants and finishing the edges

Let's move on to the next step. Here you can’t rush, cut in one fell swoop and “by eye”. It is not for nothing that people say: “Measure seven times ...”, indeed, you need to measure carefully. The easiest way is to take the shorts that you like and draw a future cut line on them, adding a few centimeters to the hem:

to bend the edge once and then walk along the seam with an overlock, just add 2-3 cm;
for a double hem, 3-4 cm will be required.

Advice! If you have never done needlework before, carefully mark the places for cutting with chalk, pins or soap. Remember: it is better to cut a little more, and then shorten it to the desired length, than to make it too short and ruin the product forever.

Taking into account all the allowances for the ruler, draw a line along which the legs will be cut. On the inside seam, the future shorts should be slightly longer than on the outside. With such a wedge, your creation will look more original than with a straight cut. Check if everything is smooth, if the length suits. After that, fold the pants in half and use sharp scissors to remove excess fabric. If you plan to create fringe shorts, add a couple more centimeters for the allowance.

Advice!Girls, and who said that the cut line must necessarily be even? The figured bottom in the form of waves looks much more elegant. When you have drawn a straight line, take something round, like a cap or small cup, apply it along the selected path and trace it, creating a wavy edge. After trimming, you can fold it and hem it, or leave it unchanged.

The easiest way to process the free edge is to fold it and sew it on a sewing machine, manually, or go overlock along the edge of the leg. For greater convenience, iron the line along which you plan to lay the seam, you can also make basting stitches with a needle with a bright thread that you pull out at the very end, sew only from the inside out.

You can do without visible seams. In stores for needlewomen, a special “cobweb” is sold, a tape with a sticky edge, the glue does not dissolve in water and holds no worse than the strongest thread. The edge of the trouser leg is first processed with an overlock, then a “cobweb” is applied over the laid seam, the edge is tucked up and glued together.

A stylish fringe or frayed bottom can be created in two ways:

in the washing machine;
manually.

In the first case, it is necessary to wash the product with in large numbers revolutions, loose threads will fray, and you will get the desired result. At the end, just stitch the edges of the panel to prevent further dishevelment during wear.

In the second option, you need to manually pull out the threads until the desired effect is achieved, or go through the selected places with sandpaper. On the front of the shorts, you can make cuts with a blade or a clerical knife, also decorate the edges of the holes obtained in the form of a fringe.

Important!In the process of wearing, the slots will increase in size, so initially make them not very large. Be sure to place a piece of plywood or thick cardboard so as not to cut through both panels.

The final stage: give individuality to your creation

One of the trending trends of the coming season is gradient coloring or ombre. We can create smooth color transition on the updated shorts, but first they need to discolor.

To do this, take one part of whiteness and dilute it in two parts of clean running water. Soak the item in the resulting solution for 2 hours, then remove, rinse and dry. If the fabric is not bleached enough, repeat the process. If you do not completely dip the product, you can achieve a transition from white color to base shade.

when working with chlorine-containing products, be sure to use rubber gloves;
in order to avoid inhalation of toxic fumes, carry out the procedure on the balcony, on the street or near an open window;
the elastic look of denim contains spandex, which, when bleached, can give an ugly yellowish tint, keep this in mind, it is better not to bleach this type of jeans;
before the procedure, carefully inspect the material if there are obsolete yellow spots-there is a high probability that they will not go anywhere;
it is best to first discolor a small piece of pants that remained during trimming, so you will understand what result you will get;
the lined fragment is weakly bleachable, most likely it will remain in its original form.

When your creation is crystal white, use acrylic fabric paints. Choose shades related to the color palette. Alternately apply paint on both sides of the panels, achieving beautiful gradient, blend the borders of the transition well.

A creative model will turn out if you sprinkle bright colors in random order. Lay your creation on a horizontal surface, first covering it with newspaper or a piece of cellophane. Then dip the brush into the paint and shake it on the cloth, alternate shades. The resulting negligence will only play into the hands.

Advice!In addition to paints, you can use special indelible markers. It's much easier to draw with them. On sale there are felt-tip pens with various "chips" - fluorescent, with a velvet effect, 3D-volumetric.

If you stocked up on stencils, you can use them to apply beautiful compositions. Just attach the selected fragment to the surface of the leg and apply paint with a sponge. Let it dry according to the instructions on the package.

Another interesting option forming a pattern using lace. Moisten the lace element in the bleach solution and apply firmly to the shorts for 30 minutes. Under the influence of bleach, your creation will change its color at the points of contact and a beautiful ornament will form there.

Stylish and elegant decor

Lace inserts look feminine and elegant; making such an ornament will not be difficult. This decoration technique belongs to the category of budget and low-cost in time. You don't need to have a lot of needlework experience to sew pieces of lace onto the base material.

There are many varieties of decorating denim shorts with lace inserts, among the most popular are the following:

decor by bottom edge trousers;
lace in the waist area;
patches on pockets;
side inner and outer inserts.

For example, we will tell you how to decorate your work with lace on the sides.

Take a piece of cotton guipure, a needle with a thin thread of the appropriate shade. Spread side seams cut off but not stitched shorts, cut a wedge from the main fabric. From the selected decorating canvas, you need to cut a wedge of the appropriate size. Then the resulting wedges should be pinned with pins to the base panel with inside. Do not be lazy to try on during the process of creating a masterpiece, it is important to make sure that the fabric does not shrink at the bonding points. After the machinations done, carefully sew the guipure insert with blind stitches or sew on a typewriter.

Advice! In order not to overload the thing with excessive shades, give preference pastel colors lace - beige, peach, white. Too bright is not always good.

If you don't want guipure inserts - no problem! They are a great alternative artificial leather. It is good if it resembles natural as much as possible. Leather stripes or back pockets, a patch on the belt will help turn a mediocre model into an outstanding design masterpiece in military style.

The current trend of the coming season is a mix of styles, try to combine brutal leather or studs with feminine rhinestones, pebbles or floral appliqué.

Glamor look it will turn out if you decorate your work with sequins. Can be decorated like individual elements(lapels, belt, pockets), and the main canvas. Decide in advance how the sequins will be located on the shorts and proceed to sewing. This process is not quick, it requires care and perseverance. But the result obtained can exceed all expectations. By the way, there are both single and rolled sequins, the latter are chosen if you need to decorate large area canvases.

Handmade always appreciated, show creativity, put your soul into the process of creation and worn, pretty boring jeans will sparkle with bright colors in a new look.

Women's wardrobe must be equipped summer suits, and various tunics and shorts. Denim shorts were and remain very popular. Having old jeans in your arsenal, making shorts out of them is not difficult.

We will tell you step by step what you need to do to turn old jeans into trendy shorts. So, how to cut jeans under shorts.

To complement the wardrobe of every girl with fashionable shorts, let's start making them.

You need to start creating new shorts by selecting old jeans.

It is desirable that the jeans are the most comfortable for you and fit well on you, from tight and loose jeans, good shorts will not work. Stretch type stretch is also not suitable. Khaki pants can also be converted into shorts, it is important that the composition is 100% cotton or close to it.

Wash your jeans before you begin to process them so that the fabric is softer and more pliable.

Before you make shorts out of something that you haven't worn and haven't washed in a long time. Wash your jeans and let them dry so they don't get too tight or shrink when cut.

Enough important point is what style of jeans you had, pay special attention to it.

Before cutting your jeans, decide what style of shorts you want. The style of future shorts will be influenced by how the jeans chosen for trimming are worn or worn. Recall what types of length are.

What shorts will you end up with?

Bermuda. These are shorts that reach almost to the knees, they are very comfortable and functional, in addition, you can walk in them not only in summer, but also in early autumn. To make these shorts fit you as perfectly as possible, you need to choose tight-fitting jeans for trimming.
Short mini shorts. These shorts are perfect for beach holiday and walks in hot weather, usually they are 7-10 cm above the knee. These shorts often have fringes, fading, and other trendy trims.
Capri. These are the longest shorts, they reach to the calves, they can be worn in autumn, in warm time These shorts are a good addition to any outfit. It is best to use skinny jeans for these shorts, so you can avoid jeans dangling on your leg.

Mark the cut

Right before cutting the jeans. Put them on and mark with chalk or with a pin the place where you are going to cut the leg. Mid-calf, knee, or mid-thigh. We remind you that after you loosen the fringe, the jeans will become shorter. Therefore, before cutting off, decide whether you need it or not. In some cases, you want to make a couple of bends on the shorts, for this, you need to make the length of the desired shorts, more by 5-7 centimeters.

Lay your jeans flat stable surface before cutting.

Draw a line with chalk and under the ruler so that the cut is even. It must be remembered that the cut of the left and right legs is made V-shaped. From the inside to the outside, the cut line rises if you look at the thing from the side of the legs. But be careful, if you don't want the hips to be too open, then don't lift the V line too high.

Cut the leg along the previously marked line

Do not worry if the line is not very smooth, then it will be corrected. And to avoid this, take scissors for thick fabric. Remember that it is better not to cut your jeans. Denim quite pliable, so just make a minimal cut, and then just tear the jeans with your hands. If it starts to tear out of line, take a small pair of scissors and return the cut to the marked line.

Wear shorts. Measure and see how it will look in the mirror.

Take a close look at yourself in the mirror, you may want to change their length.

Next, let's talk about what happened to the cropped jeans, these are almost ready-made shorts. But you can't wear them yet. There are a few more steps to be taken before we get ready product. We will tell you about the design of denim shorts with your own hands, what you need for this and tell you how to dye denim shorts. Recall how to make shorts with torn edges. So the shorts are almost ready, let's look at several options for what can be done with the shorts. Hem, tuck or torn. If you decide to hem your shorts. Fold over the edges and sew them on the sewing machine. If not, then it can be done manually.

Before tucking, the edges must be hemmed. After that, fold the edges so that you get a uniform hem along the entire length. If everything worked out, feel free to hem the collar and go through it with an iron.

Ripped jeans or fringe?

Here he will do all the work for you. washing machine. Wash and dry the shorts, if the length of the fringe is not what you want, then repeat the wash as usual. When you get a satisfactory result, sew the edges of both legs.

We make shorts, make them perfect

We already know how to make shorts from old jeans, but what to do next. The next step is decoration. Decor creative process where you can safely fantasize and embody your fantasies. What you need for this, we will describe below. For decoration in glamorous style you need to take sparkles, beads and glue or a needle and thread. As you may have guessed, the pattern can not only be drawn, but also embroidered and glued. You can find an original ornament on the Internet and transfer it to shorts.

If you want to give your shorts the look of something not the first freshness, a vegetable grater, sandpaper and a metal brush for dishes will help you. Rubbing the seams around the pockets and on the sides will give the piece a worn effect. And shorts worn only at the edges will look worn, but not old.

With scissors, you can make appearance one or more cuts. After you wash the item, fringe will appear at the cut points. Make parallel or perpendicular cuts. Fantasize boldly.

By using special means, you can easily lighten jeans, make them more attractive.

There is another way to decorate the product. To do this, you need an elastic band and a solution of whiteness with water 1: 2. Squeeze the shorts with an elastic band and leave them for 20-60 minutes, the time depends on the intensity of the desired effect. After that, wash the product.

Ready-made shorts can be worn in summer period as much as you want, anywhere and with almost everything with anything. They go well with T-shirts and various blouses, but stylists and fashion house representatives will tell you better. Moreover, the fashion world does not stand still, such a wardrobe item that is relevant for the summer will not be lost. We encourage you to experiment and be creative. After all, a thing made with your own hands is always more expensive and more pleasant.

How to change jeans Probably, in the wardrobe of any man there is far from one pair of jeans. There are a couple for visiting, for going bowling with friends, for giving or repairing a car. And the most beloved, carefully preserved for several years. All in holes, splashes of paint, shabby ... But it will never be possible to throw it away. It is impossible to wear, and the slightest attempt to free up space in the closet causes a storm of emotions. In such a situation, there is only one way out - to modify this thing! How to make jeans out of jeans Everything is simple, the main thing is to warn your husband so as not to call him

So, how to make jeans men's shorts?

In order to turn this miserable semblance of a wardrobe item into a thing that can be worn for some more time, you will need patience, scissors, threads, and then - according to circumstances ... To begin with, try to remove all dirt as much as possible, greasy spots, traces of fuel oil and paint. If you manage to get your husband to put on jeans and measure the future length of shorts on him, great. However, there is very little hope that the average man will turn in front of the mirror. In this case, in order not to be mistaken and not to hear reproaches instead of gratitude, it is worth taking shorts from his wardrobe and cutting off the legs based on the sample. Do not forget to leave a small margin, literally four to five centimeters. This will allow not only to hem, but also to adjust the length of the finished product.

How to make men's shorts out of jeans: holes

After the legs have been cut off, the next step begins. This is no less important moment. How to eliminate the created by numerous holes and tears in the fabric? If the holes are small and there are only a couple of them, then you can close them with some kind of neutral application with the image of a brand or, for example, a ball. If the husband is an opponent of labels and jewelry, just leave a hole, after giving it a stylized look. In this case, the paint spots will also look more organic. IN last resort, you can put a patch from the same fabric, leaving its edges shaggy or carefully tucking and stitching diagonally several times. You almost managed to make men's shorts out of jeans. Next remains final stage work.

How to make men's shorts out of jeans: edge processing

Some men prefer shorts with carefully finished edges. Others, on the contrary, recognize only a carelessly cut off bottom, from which light warp threads peep through. The edge should be hemmed very carefully, having previously processed it with an overlock.

After the jeans are hemmed, you can lay a stitch over the fold line. It all depends on preferences and style of clothing. IN this case it is useless to try to convince or dissuade a man. It is better to immediately agree and do as he wants. Satisfied, perhaps he will allow some more old things to be modernized, thus freeing up space on the closet shelf.

Jeans in the wardrobe can be found, perhaps, in every girl. This is one of the most convenient and practical things. But over time, jeans can stretch the material in the knee area, or “worn out” the bottom. If top part is still quite wearable, then this thing can be redone and used again for a long time. The best thing you can think of to "transform" old trousers is shorts. Here we will show you how to make shorts from old jeans, with photos and instructions. Any girl will cope with such tasks, and special costs will not be required.

What do you need to convert jeans into shorts?

Sewing machine (optional, some finishes can be done by hand);
Threads to match jeans;
Scissors;
Accessories (braid, lace, ribbons, beads, sequins - depends on what shorts you want to make);
Ruler;
Chalk or piece of remnant.

Regular denim shorts with collar

This is the fastest and easiest way to make your own denim shorts. All you need is scissors, a ruler and a crayon. Before you start, jeans should be washed and ironed to make it easier to take measurements.

Instruction:

Measure the desired length of the shorts, but keep in mind that you will have a collar, so add another 8-10 cm to the desired length. Draw a line on one leg with a ruler and a small one. Make sure the length is acceptable.
Carefully cut the leg along the line.
Fold the jeans so that you can draw a line along the cut leg on the second side of the trousers.
Cut off the second leg.
Make a double fold and iron it to secure the folds. Shorts are ready!

Look at the photo how to make shorts from jeans with a collar:

Denim shorts with fringes

This do-it-yourself variant of jeans shorts is also not difficult. You won't need any thread or sewing machine, only scissors, ruler and chalk.

Instruction:

Take measurements of the length and draw a straight line on the leg with a chalk and a ruler.
Cut off the length, as in the first method.
Next, with your hands, simply begin to “mohr” the edges of the shorts, pulling out the threads of the material along the edge. Do this to your desired fringe level.

If you want to be sure that the denim shorts will not start to unravel further, then you can fasten the fringe with one machine stitch, then the threads will definitely not “furry” further.

The photo shows how to make fringed shorts:

Jeans shorts with lace

From old jeans you can make fashionable and beautiful shorts, using lace as a decor, which, of course, will need to be picked up and bought in advance. There is nothing difficult in such work, but basic sewing skills are needed. It’s good if you have a sewing machine in your house and you know how to handle it, but you can get by with hand sewing. So how do you do it yourself denim shorts with lace, read below.

Instruction:

Pick up the lace that will be placed on the sides of the shorts. Usually in stores for needlewomen there is no shortage of such accessories.
Cut the shorts to the desired length using the instructions above.
Using needles, attach the lace to the side so that it fits evenly, in this case the side seam will be the guideline.
Remove the backing from the lace, if any.
Sew the lace to the denim by hand or with a machine, the stitch should go along the outer edges of the lace.
Then, from the inside, carefully cut out the excess denim.
Loosen a little fringe around all the edges of the shorts.

As a result, you will get a very cute and stylish little thing. These shorts are romantic style can be combined with feminine tops and blouses. They will look great on walks and parties.

See in detail in the photo how to make denim shorts with lace with your own hands.

You can also trim the entire lower part shorts, for this you just need to sew lace ribbon around the cut edge.

Today, a huge number of various beads, rhinestones, sequins, stones, rivets and other cute little things for decorating clothes are sold. Any denim shorts can be decorated with such decorations, it all depends on your taste and imagination. The shorts you make yourself have one great advantage- No one else will have such a thing!