How to lengthen denim shorts. How to decorate cut-off jeans. Trendy “star” shorts made from old jeans

Fashionable short denim shorts You can not only buy it, but also make it yourself. How to do it yourself so that they look as fashionable and stylish as possible? Read the answers in today's article.

Denim is a strong and wear-resistant material that can last quite a long time. for a long time. Originally intended for sewing work clothes. Traders liked this fabric so much that after some time they began to use it for sewing skirts and jackets. The older generation associates jeans with eternal shortages, “farmers,” and difficult Soviet times. The first denim pants were altered several times and worn until holes formed. Perhaps this is where the trend of using old and worn-out trousers to make shorts came from.

Density denim may be different. Thicker ones are used for sewing jackets and pants, and light denim with elastane is used for sewing shorts, trousers and skirts. This material feels more elastic to the touch. Denim clothes withstands the test of dirt, repeated washing and even repainting. Therefore, old and worn out jeans can be turned into modern and stylish shorts. The design and appearance of new shorts depends solely on your imagination.

Ombre denim shorts: fashionable, affordable new items

Ombre is by far the most fashion trend season. This trend has been continuing for several years now. Moreover, it applies to literally all fashion.

So, what do you need to turn old jeans into exclusive ombre shorts:

old jeans of any color, the main thing is the right size;
coarse brush (plastic);
acrylic paints for dyeing fabrics;
painting brush (wide but hard);
a piece of cardboard and old coarse fabric (for lining);
whiteness (bleaching agent);
wide basin for rinsing.

First you need to decide on the length of future shorts. To make it easier to decide on the length, first cut it a little longer than planned, try it on, and outline with chalk or soap the places that need to be adjusted. After the fitting is finished and you have decided on the length, cut the pants 5 cm more than the expected length. This gap will be needed to create the edging. You can cut it evenly or a little obliquely - it depends on your desire.

The color design can be selected in several options:

color transition from dark top to light bottom;
multi-colored shades with a horizontal smooth transition;
frame vertically.

Next, you need to dilute the paints in water according to the instructions. Cut a piece of cardboard so that it can be placed inside the shorts. Wrap cardboard thick fabric, place inside. Painting should be done on both sides. Apply paint with a brush the right part shorts Leave for the time specified by the manufacturer. The edges can be painted unevenly and unevenly, but this will all be corrected later.

If you decide to choose the option “from dark top to white bottom,” then you need to do the coloring at least 4 times. Each time for uniform and smooth transition, use twice less paint for the same amount of water. This way the transition between shades will be more uniform. Shorts can be roughly divided into 5 zones: at the top there are dark, saturated tones, at the bottom there are light, almost white, shades.

After the first painted stripe, apply new, lighter paint overlapping a few centimeters from the first layer. Before the second and subsequent applications, the previous layer of paint must be washed off. Apply color to slightly dried shorts. The dyeing process will take quite a long time, but the result is worth it. The last two lightest layers can be applied to damp shorts. After they have been rinsed from the remnants of the last layer of paint, you can begin the final stage.

The edges of the shorts must be treated with “whiteness” or any other bleach. Carry out the treatment in a ventilated area or outdoors; bleach vapors are very caustic. Keep the mixture on until the edge of the shorts is completely discolored (10-15 minutes). Then rinse and wash. Then dilute the white in a 1:2 ratio with water and use a stiff brush to make a transition at the junction of the last layers. It is necessary to rub with a stiff brush until a uniform, smooth transition is formed. Rinse everything again. At this point, the staining stage is considered complete.

The edging of the shorts can be varied:

torn edges with protruding threads;
white edging (ruffles);
beads;
ribbon in the form of crocheted braid;
neatly stitched edges.

So to do fashionable shorts Ombre from jeans, you just need to follow the sequence of dyeing. Any shortcomings can be easily eliminated and corrected.

Feminine and romantic shorts with ruffles

A romantic, even a little naive image is another trend this season. If you want to add new denim shorts to your wardrobe without spending extra money, we take into account the following algorithm.

Old ripped jeans cut to the desired length. There are several options for ruffled shorts in completely different styles:

short shorts with superficial patches;
side inserts made of openwork fabric;
openwork pockets protruding from the bottom.

Any option will help not only complement your familiar image, but also change the style with notes of romance and femininity.

Long shorts with lace side panels are very popular right now. If you have the time and desire to experiment, here's what you need to do:

cut the jeans with a margin of 5 cm to the planned length;
it is necessary to cut the side corners in such a way that instead of denim, fill them with openwork inserts;
It is better to choose an openwork with a ready-made edging. In this case, you can simply sew the patch over the cut edge.

Now you can decorate the side openwork edgings. A glue gun for fabric and rhinestones or beads will come to the rescue. Once you've completed the process, you'll be amazed at how much your once unsightly jeans have changed.

Do you like rhinestones, sparkles and beads? Then you'll love the idea of creating your own "brilliant masterpiece." In order to upgrade old jeans into new and trendy shorts, you will need:

rhinestones, beads and seed beads;
fabric glue gun;
thread and needle;
scissors;

This option is ideal slender girls. The shorts are ultra-short, actually beach shorts. You need to cut the jeans so that a third of the front pockets peek out from under the legs. Trim any protruding threads and sew fabric (lining) of any color to the protruding pocket. Rhinestones and beads will be glued and sewn onto it. For the perfect appearance It is worth choosing large stones for central decoration and small rhinestones for decorating the edges. You can glue them in any order, giving free rein to your imagination. Both bright beads and golden rhinestones will look organic here.

After the gluing stage is completed, we proceed to the design of the edging. If you like ragged edges, you need to stitch the edges 2 cm from the bottom of the leg. Then use a needle to fray all the horizontal threads. The length of the vertical threads is also adjusted. You can decorate the upper pockets by gluing the same rhinestones or beads. The bulk of the shiny decor should fall on the part of the pockets protruding from under the remains of the trouser legs. Otherwise, the shorts will look provocative and tasteless.

DIY classic denim shorts

Your imagination and desire to look exclusive will help you create a masterpiece. But, if you only need to ensure practicality, you can do classic shorts middle length. All you need is old boring jeans, scissors, chalk and thread.

You need to cut the pant leg slightly at an angle. If you cut it evenly, then when you walk, the pant legs will “gather” between your legs. If pockets are visible after cutting, they need to be trimmed and sewn up. Classic is not always boring. You can always decorate your shorts with classic cut an unusual and eye-catching detail. For example, you can sew a red flower or a bright bead near top pocket. You can process the edges as in the options proposed above.

Fashionable denim shorts are an expensive item of clothing only for those who do not know how to make such a thing out of boring pants. Short branded shorts cost a lot of money. However, you can create it yourself exclusive item virtually no cost. For an exclusive design of your new shorts, you can use rhinestones, fabric ribbons, soft delicate satin or romantic ruffles. It all depends solely on your imagination and ingenuity. The only rule in this process there is a sense of proportion and accuracy.

The most popular Summer clothes These are shorts and Bermuda shorts. To update a little summer wardrobe, you don't have to buy new shorts. After all, there is always the opportunity to make shorts from old jeans that are tired or don’t fit at the waist; we also have this option for alteration.

How to make shorts from jeans with your own hands - we will tell you in this material. In order to make denim shorts at home, you can do without a sewing machine, just scissors, a stiff brush, and a needle and thread to match the color of the jeans. If you want to make women's trendy cut-off shorts from old jeans, choose one of the types of decor suggested below. It is possible to make homemade cool and cool shorts with your own hands.

Denim shorts with laces and pocket decor.

Denim shorts for summer - great option. Things made with your own hands are worn with special pleasure. How to cut jeans or overalls and how to alter them? First of all, don't rush. Take a pin, chalk, or a piece of soap and put the jeans on yourself. Decide how long the shorts you want to make. If your choice is Bermuda shorts, then you should cut at knee level. If you want to do women's shorts with your own hands with a turn-up - then you need to take into account the extra 3-5 cm for the turn-up. You can shorten and trim the excess later. So, we make shorts from jeans. Instructions.

Length of cropped bermuda jeans.

The cutting and sewing technique is simple. After you have decided on the length, take off your jeans and lay them out on the table or floor. The main thing is that the surface is smooth. We mark the fabric by folding the jeans in half, with the back pockets facing up. We combine the external seams, waistband, and pocket rivets. It’s better to pin down all the combined places tailor's pins to avoid displacement.

Next, measure the distance from the waistband to the inner crotch seam, and the same from the waistband along the outer seam. We draw a line. The bottom cut line should be parallel to this line. The marks are checked again and the trouser legs are cut. Cut it evenly; you can take long scissors - it’s more convenient. Next, we need to process the bottom of the shorts from old jeans with our own hands.

Bottom processing

Our task is to carefully process the bottom of the product. Do not try to make a double denim stitch on shorts - this is done on a special basis. equipment. There are several options for processing the bottom: make sections with fringe, turn up, or sew by hand.

- the simplest option for designing the bottom of shorts. It looks great in women's models; fringe is also found in men's Bermuda shorts. To create fringe, many people recommend washing the item in washing machine, and not even just once. This is fraught with the fact that the fringe threads can ruin the washer; you won’t get a neat bottom - it will still need to be finished. It is better for this purpose to take a stiff brush and comb out the excess threads from the cut. Another option: carefully “pluck” the white base with eyebrow tweezers. Fringe will give the shorts a special charm.

- a good option for processing the bottom. There are double and triple gates. This season, the rolled-up trouser leg is decorated with a strip of thin cotton fabric. A strip of fabric is sewn to the inside of the pants. But this option is more suitable for the coolest men. The most popular men's shorts are Bermuda shorts.

If this is a regular fold, just fold the denim shorts as many times as you want and iron them. To prevent the hem from unfolding, you can sew it with hidden stitches to the seams.

How to make fashionable shorts out of old jeans? Of course, due to the decor and decorations. Shorts for women can be white, black, with high waist and low, short and not very short. Decor options: small holes, embroidery, patches, sequins, lacing, lace. You can choose the coolest finishes.

Judging by the price tag in the store, shorts with holes are not cheap at all, but rather the opposite. How to do torn shorts? Firstly, to do this, you must place thick cardboard or a piece of plywood in the middle of the trouser leg, so you will not cut the denim shorts at the back. Holes can be made using a sharp utility knife or blade. To begin, take a piece of chalk or a piece of soap and draw future holes on the shorts. We don’t recommend getting carried away and making big holes.

Practice on a cut piece of jeans. On all denim jeans, the white threads are the warp and the blue threads are the weft. The white base of standard denim runs parallel to the floor. Our task is to select all the dark weft threads. This is most conveniently done with nail scissors: carefully remove the dark threads, leaving only the white base.

The cuts should be parallel, with a distance of no more than 1 cm. This is how this heart is made. The hole can have any shape: square, rectangular, irregular.

To prevent the threads from spilling out, it is advisable to glue the edges of the hole with non-woven material on the wrong side, or secure it in another way. For example: sew a piece of fabric on the wrong side, let it show through. Or change the burlap on the pockets.

How to decorate short shorts in an interesting way? A good option- cotton fabric of matching color. You can decorate the back pockets, or the entire front half of denim shorts. Fashion 2017 - shorts of asymmetrical length.

The fabric can be any: these jacquard fragments are sewn on by hand.

Using rope lacing and denim inserts, you can increase the size of the shorts if they are too small for you.

If you are not interested in regular shorts, you can decorate them with these patches:

IN Lately we often see fashion for hand embroidery. Satin stitch or cross stitch is used to decorate denim clothing, including shorts. Stitch embroidery ideas:

Glad to meet you! Again the conversation will be about useful alterations from old to new. This time, how to make your own jeans shorts. There are many tricks in this handicraft, which we will tell you about today.

How to transform old into new?

In every housewife's wardrobe, old, worn clothes lie idle. It's time to get down to business and give them new life! Thick seams scare you? Experienced craftswomen We told you some tricks that will help you cope with this problem.

How to set up a sewing machine

Let's start sewing

And we finish...

To make a belt loop, take pieces of fabric 3.5 cm wide. Iron them 1.3 cm on one side and 1.0 cm on the other. front side Sew with thick threads, departing 3mm from the edge.

To ensure that the reverse side is no different from the branded one, make a “goat” seam. Loop in finished form– 6.5 cm.

Scheme for converting jeans into shorts

Getting fashionable shorts is very easy. First, measure the desired length and draw a cutting line around the entire circumference of the leg with chalk. Measure again and cut. Your dream is for the new thing to have a lapel.

Crafts lessons for beginner seamstresses

Young girls all over the world have fallen in love with ripped shorts. Why don't we create our own masterpieces? A new thing can come from old ones. Measure the required length, cut, and tear off with your hands where there are no seams. Cut at the seams with scissors.

Important! Cutting lines today are made in V-shape. This way the product looks much more original than when cut in a straight line.

To obtain transverse stripes, just cut the shorts with scissors, then pull out the threads. Don't forget that the holes will get even bigger when washed, so don't overdo it!

To make your shorts even more frayed, rub them sandpaper.

Ombre shorts

Beautiful pants are obtained by dyeing them in the form of “ombre”. This technique has gained real popularity. Dyeing process:

Dilute dry acrylic paints for fabric with water strictly according to the instructions.
There are two methods of gradient painting: paint of one color or two colors.
Dilute a small amount of dye so that the color is not saturated.
Place most of the product in a container with liquid and hold for 5 minutes.
Take out the shorts and dilute the remaining paint in the same water.
In a darker liquid, lower the product again and hold for 5 minutes. In this case, you need to lower it to a shorter length than the first time. The second part of the product should be darker.

How to decorate a new thing

Wearing simple shorts is no longer interesting. They need to be decorated! How to decorate new item wardrobe? Here you can give free rein to your creative desires.

Things look beautiful if they are decorated with appliques, sequins, or beads.

Shorts with lace look feminine.

Women's shorts with lace can be made in a few minutes:

) function runError() (

cut off the edges on both sides,
sew in lace.

Lace can be sewn onto the pockets or along the entire line of the legs, it all depends on your imagination.

What if you try to cut not in a straight line, but in a zigzag? Nothing complicated! Take the cap from plastic bottle, trace, trim, process on an overlocker.

No one has ever seen such a new thing!

Dear friends When going on vacation, don’t rush to the store for new clothes. You know how to make your own jeans shorts!

Denim shorts are an almost indispensable component of both women's and men's wardrobe. They never go out of fashion, they just change possible options their execution.

The right choice of model allows you to combine shorts with almost your entire wardrobe. And at the same time, both men's and women's shorts can very easily be made independently, from old jeans.

Preparation

As the famous proverb says, "Seven times measure cut once". This is especially true when it comes to making shorts, so preparatory stage important enough for the future thing. It is from the correct selection of jeans and correct pruning will depend on what the final model will look like.

Before you start, you need to clearly understand the expected result. For this the most useful point will be the production of a sketch - already from it the desired length, color, and the opportunity to experiment with decor will be visible. It is very convenient for this to use various computer programs, like Photoshop. Important: The model created from the sketch and the model obtained during manufacturing may differ.

Choice of jeans

The first and most important stage- selection of cropped jeans.

When making men's shorts, just like women's, you need to give preference to the model that sits well on the hips.

Loose shorts can be created by cutting off wide jeans.
Skinny model - when cutting off skinny jeans.
Stretch jeans for cutting - not the best best idea. When trimming, plastic stretch threads and elastic bands will be noticeable, which can spoil the appearance of the final product.
Khaki jeans are great for cropping, but should not be decorated with lace, sequins or embroidery. In itself, such a color is quite bright and it will be quite enough to simply highlight it with the help of a single-color decor - leather, metal inserts.
In the presence of overweight and pronounced cellulite, it is better to refrain from creating short, tight shorts. This model can highlight figure flaws. In this situation, it is better to give preference to high-waisted jeans - by cutting them with your own hands, you can get fashionable women's shorts in pin-up style. A high waist will visually lengthen your legs and make them slimmer.

Planning

The next step in how to make fashionable shorts from old jeans with your own hands is choosing the cutting location.

Women's shorts can be cut along the following lines:

Capris are cut at the calf muscle.
Breeches are cut at knee level.
Bermuda shorts are cut above the knee.
Classic shorts are cut 10-12 cm above the knees.
Mini shorts are cut to a comfortable length for a short skirt.

Men's shorts have slightly fewer options for cutting:

mid-calf;
knee level;
above the knee;
mid thigh.

After clearly defining the intended cutting line, you need to find out which bottom will be the most desirable. If there is fringe bottom edge it is necessary to trim 2-3 cm below the expected length. For men's shorts, a rolled design is more preferable - it allows you to get a more neat effect and makes it possible to combine shorts with both T-shirts and shirts. To create a tackle, you need to leave at least 7 cm of length below the expected length.

Marking

Before applying markings, especially if the jeans have not been worn for a long time, you need to wash them.

When washed, the fibers can shrink, and therefore fashionable shorts from old jeans can turn out much shorter than the intended length.

After washing you need to apply markings. To do this most correctly and accurately, you need to put on jeans and mark the desired length - with pins or chalk. A piece of old soap is also great for making marks. To get the most exact result, the soap should be sharp.

After applying the markings, the jeans are removed and the correctness of the lines is checked. Here is one of the very important stages of making a product with your own hands: when creating short shorts, you must take into account all the features of the anatomy and make the back part a little longer than the front.

Ignoring this rule will result in shorts that are shorter at the back and may not fit properly.

Trimming

Denim has a high density. Therefore, you need to choose very sharp and, if possible, long scissors. It is easier to make an uneven edge with short scissors, but with blunt scissors it will be difficult to cut evenly. When pruning, do not cut both sides at once, front and back. It is better to cut the pants in a circle or one at a time.

With this DIY cutting, fashionable denim shorts will be straighter. The presence of a small error is not at all scary - it can be hidden with a collar or fringe. But major flaws can no longer be hidden this way.

Pruning is the most important step. It was from her correct implementation will depend on how well you can make new fashionable shorts from old jeans. Do not rush to trim - this can lead to errors. Having multiple fittings is ideal, especially for inexperienced seamstresses. By trying on old jeans after each cut, you can make the most even and beautiful line cut.

Edge processing

So, the trimming is completed and now it’s time to bring the product into its final form. The first thing you need to do for this is to process the edges of the product. Many here admit one of major mistakes and are trying to recreate the denim blanket stitch.

This stitching is done using special equipment and its creation at home can bring far from the most aesthetic results. Therefore, in this situation, it is better to refrain from this type of processing and give preference to other methods.

Fringe

The most popular and easiest option. Great for female models. On men's shorts occurs less frequently. You can find advice that says that to create fringe it is enough to simply wash the resulting product in the washing machine.

This statement has some truth, but also a number of shortcomings:

the threads will end up in the machine drain, tank and may even get into important elements, which will lead to breakdown;
the threads are washed out unevenly, and therefore after washing such fringe will have to be adjusted.

Most convenient way make fringe - use a small brush. With its help you can “comb out” excess threads. So that the fringe has neat look, it is better to stitch it along the border with the fabric - this will help prevent further unraveling of the product and make it more durable.

Gateway

Most neat option edge processing. To do this, you must first "rehearse" bending over the edge the required length. A triple twist is optimal - it does not tend to unfold spontaneously. The edge of the shorts must be stitched so that they do not unravel - this will give the product an unaesthetic appearance.

Jeans are a timeless wardrobe item. An outdated model of your favorite pants can be given a more stylish look, adding a little decor, repainting or cutting it to the size of shorts.

You can make stylish denim trousers from boring jeans. To do this you need to arm yourself necessary materials and a couple of interesting ideas.

Original "varenki"

To create “spotted” pants you will need dark, worn jeans, an old saucepan, whitewash, and clips.

Execution steps:

Twist the jeans. Secure some parts with rubber bands or clothespins (in the latter case you will get “stars”).
Fill the prepared container with water (halfway), heat it to 80°C and quickly pour a glass of white into it.
Continuously stirring the solution, bring it to a boil.
Immerse jeans in boiling liquid. If they start to crawl out, push them back in with a ladle.
After a quarter of an hour, take out the renewed item and transfer it to the bath, remove all the fasteners and rinse thoroughly.

Space jeans

Acrylic paints are required to obtain unusually designed trousers. Toothbrush, foam sponge, bleach diluted with water (2:1), a bowl for diluting bleach and dark jeans.

Progress:

Spread a large piece of film on the floor and put jeans on top.
Fill a spray bottle with diluted bleach and spray it onto your pants. Faded spots will soon appear.
Blot the sponge acrylic paints one color and coat the outline of two or three spots.
Next, wash the sponge and take a different color. This way you can use several different colors.

In our denim “galaxy” you can draw a cluster of white stars using a toothbrush. To do this, dip it in white dye and spray the drops with your finger on different parts of the pants. It will take 2 days to dry.

Thanks to a creative approach, “boring” jeans will turn into a piece of fantastic design. And most importantly, no one else will have such a thing.

Markers and stencil

If you know how to draw, purchase special fabric markers. Think about what image you would like to have on your item. The sketch of the design is applied to the jeans in chalk. And only then is it colored with felt-tip pens.

Advice! To make the drawing accurate and symmetrical, use stencils that are sold in the stationery department.

Instead of a stencil, you can use lace: insert a piece of cardboard into the trouser leg, place the lace on top and secure it with needles. Using a piece of foam rubber and paint, stamp the lace design, then wait for it to dry completely.

Cuffs

Most quick method- roll up your jeans! This fashion direction filled the podiums. Cuffs will add chic to rolled up jeans. Their optimal width is 5–7 cm.

So, first you should fold the trousers outwards, baste them to the trouser leg and start decorating the cuffs:

beads;
crystals;
fringe;
strips of bright fabric.

Cuffs with velvet look especially good.

Application

Another decorative option is bright fabric with any print (hearts, a portrait of a famous person, stars, ethnic patterns, etc.). The design you like is cut out with scissors and sewn onto the front of the jeans.

Look amazing on women's clothing mesh stripes. In this way, fashion designers design pockets, bottom, front and even back of the product.

Openwork inserts

Perhaps the most glamorous finishing option is lace and guipure. In 2018, the trend is an openwork strip 5 cm wide. The lace is used as a patch on the hole. It is sewn on the front or back side. Lace can be laid out in a pattern or flower on the front of the trousers.

White guipure sticking out in the slits looks very piquant denim trousers blue color. Delicate patterns cut from openwork fabric are sewn onto the trouser leg in the form of an applique. You can decorate your pockets this way. A great idea is a guipure ribbon around the waist.

Attention! Do not overdo it, otherwise the abundance of lace will turn the updated jeans into too provocative a thing.

Embroidery

You can transform old jeans with embroidery in such a way that later your friends will ask where you bought such beauty. For example, using floss threads, a unique embroidery is created. These can be colorful butterflies, exotic birds, floral motifs.

Rhinestones

Refresh old clothes rhinestones. It is advisable to purchase accessories that have an adhesive base and are fixed by heating.

Technique:

Lay out your old jeans on the table.
Place the selected design on them with rhinestones. For this purpose, use tweezers.
Cover carefully finished work cotton cloth and press it with an iron, turning on the steam.
Use rhinestones different sizes, glue first small parts, and then - big ones.

On a note! Using this technology allows you to wash your trousers in a machine.

Beads and sequins

Decorate your old jeans with colorful or white beads. They will look great on the side seams. They can be scattered throughout the pant leg or collected in neat clusters in separate places. Add your name or a funny saying with beads.

Glamor lovers should pay attention to sequins. Rolled glitter is sewn to the product by machine. This way you can decorate large area jeans. Piece sequins should be sewn on by hand, with each piece secured separately.

Rivets

Rivet decor is very popular today. Decorate old jeans with studs in the waistband area, side seam, on your pockets or put an inscription on them.

Prepare an interesting drawing on paper sheet. Lay the pants out on a flat surface and transfer the prepared print onto them. Make punctures in the fabric, insert rivets, securing them on the back side.

Attrition

First, select the areas where the abrasion will be located. Using a horizontal motion, lightly rub the selected area with a grater, removing only the top layer of thread.

Hole effect

Place the old trousers on the table and mark the locations of future holes with chalk. Use scissors to make several horizontal cuts. Pull a few threads along the edge of the hole, creating a “worn” feeling.

To prevent the holes from spreading, sew scraps of guipure to the wrong side of the pants. You can decorate the holes with sequins or lace.

Luxurious shorts made from old jeans

Frayed, frayed, torn, out-of-fashion jeans can be turned into exclusive shorts. This kind of work can be done even by those who have no experience.

It is important to know some nuances regarding the length of shorts:

short - slightly cover the buttock area;
classic - 10-13 cm long above the knees;
Bermuda shorts - just above the knees;
capris - mid-calf length.

Please note! The short style of trousers is more suitable for girls with long legs.

Step-by-step cutting of old jeans:

Put on old pants. Decide on the location of the cut and mark it with chalk.
Be sure to leave about 3 cm for finishing the edges with ribbon, fringe or other material.
Lay the jeans out on a smooth surface and draw a straight line. Feel free to use scissors.

The types of design for shorts, like long pants, are varied, these are: lace, various stones, beads, paints, etc.

Samples decorated with embroidery look original. A smaller pattern is appropriate for pockets, and a larger one for the hip area. Use a chalk to transfer the embroidery plan onto the shorts. Then you should use the cross stitch method.

Torn shorts look stylish. But since the product itself is small, the holes must be covered from the inside out (guipure, mesh, any beautiful fabric).

Ideas for men

Representatives of the stronger sex also follow fashion trends. Old men's jeans that require a “fashion reboot” can be decorated with decorative accessories such as:

chain;
buttons;
thorns;
labels;
fabric inserts.

Today, the trend is pants that look aged, so wear and decorative holes will look great.

Remember! Handmade is always appreciated, and it is appropriate for everyone.

Thus, to update your wardrobe with new jeans, you don’t have to buy them. Can be done new thing make your own from old jeans.