How to protect yourself from negativity and strengthen your energy. Practice: self-defense against energy strikes

Instruction

You can get a charge of negative energy in many ways. This may be being in a geopathogenic zone, possession of objects containing negative energy. Often the causes of the disease are the evil eye or deliberately induced damage.

Check your apartment for negative places. You will need two L-shaped dowsing frames - bend them from iron wire. The length of the handle is about 15 centimeters, the long part is 30-35 cm.

Negative places appear at the intersection of energy lines that form a grid on the surface of the earth with a cell size of about three by three meters (maybe a little more or less). The presence of the grid does not depend on the number of storeys of the house, it is present in all apartments.

Keeping the frames in front of you parallel to each other, slowly walk around the room, with the intention to find the energy line. The moment you cross it, the frames in your hands will converge. Mark the position of the line on the plan of the apartment. Moving through the rooms in different directions, determine the location of the energy grid and its nodes.

If there is a bed or chair at the intersections of the lines, move them to another place. It is impossible to sleep at the intersection of the lines, this is fraught with the most serious diseases. Take this seriously - the negative impact of the points of intersection of energy lines on human health is confirmed by many researchers.

If you are a believer, then the most reliable protection against evil eye and damage of all kinds is your faith. Wear a cross (or other symbols of your faith), go to church. Firmly believe that you are under reliable protection and no one in this world can harm you.

No less reliable protection is complete disbelief in all this "obscurantism". The principle is simple: by believing in something, you automatically open up to the energies of that range. And vice versa, if you do not believe in the evil eye and damage, it will be very difficult to harm you.

Be very careful when buying antiques, especially mirrors. Mirrors do not store information, but provide access to it. If the mirror witnessed some bad event - for example, someone's death, the negative energy that accompanied this event will be available to you.

Always check dowsing frames purchased paintings. Many paintings carry a charge of negative energy: by hanging such a picture at home, you will provide yourself with not only health problems, but also a long streak of failures.

When communicating with an unpleasant person, mentally surround yourself with a protective energy cocoon. The second option: imagine this person naked. The third, most radical - mentally stick a short arrow into this person in the area of \u200b\u200bthe "third eye" (the point between the eyebrows). This will immediately deprive him of the ability to suppress you with his will. Use this option only in last resort.

Cats provide good protection against negative energy. In the event that they try to exert some kind of witchcraft effect on their owner, the cats take it upon themselves. If the impact was strong, the cat may die as a result of illness or accident.

No person lives in a vacuum. Each of the people daily contacts with dozens of their fellows - family members, employees, companions on the road, and so on. And not all of them wish him well. Negative energy coming from envious people, enemies, ill-wishers, or simply people “not in the mood” can seriously harm if you do not learn how to defend yourself from it. To do this, mankind has invented several techniques.

Instruction

Closing a loop
If you have to communicate with a person who is hostile to you, use next trick. During the conversation, cross your arms and legs, thereby closing the contour of the biofield. Many people use this technique instinctively, as soon as they feel threatened by the interlocutor.

Ring
Another effective technique will also serve as protection in a conversation with a person from whom one cannot expect good. Connect index and thumbs hands, laying the rest on top of each other. You should get something like a ring of fingers that will protect you from the attacks of an unfriendly interlocutor. This technique works the same way as the previous one - it closes your biocircuit, not allowing anything destructive to penetrate from the outside.

Mirrors (visualization)
If you have a well-developed imagination, then the technique with mirrors will serve you well. Just imagine that you are surrounded on all sides by mirrors that reflect all the negativity projected onto you and send it back to the owner. This technique will work especially well if you can imagine yourself completely enclosed in a cylinder without a single seam or crack.

When solving problems of protection against energy impacts allocate a source, a receiver of energy and a protective device that reduces to acceptable levels energy flow to the receiver.
The protective device has the ability to reflect, absorb, be transparent with respect to the flow of energy and is characterized by energy absorption coefficients, reflections, transmission coefficient. Therefore, the following principles of protection can be distinguished:
1) protection is carried out due to the reflectivity of protective devices;
2) protection is carried out due to the absorption capacity of the protective device;
3) protection is carried out taking into account the transparency properties of protective devices.
In practice, the principles are usually combined, obtaining various methods of protection (in particular, isolation and absorption).
Isolation methods are used when the source and receiver of energy, which is at the same time the object of protection, are located with different parties from the protective device. These methods are based on reducing the transparency of the medium between the source and the receiver. In this case, two main methods of isolation can be distinguished: a decrease in the transparency of the medium is achieved due to energy absorption or due to the high reflectivity of the protective device.
Absorption methods are based on the principle of increasing the flow of energy that has passed into the protective device. There are two types of energy absorption by a protective device: energy absorption by the protective device itself due to its selection from the source in one form or another, including in the form of irreversible losses, and energy absorption due to the high transparency of the protective device.
For example, when exposed to such a hazard factor as vibration, inertia, friction, elasticity and forcing forces act in the vibrosystem. To protect against vibration, the vibration isolation method is used, when a vibration isolator with a low transmission coefficient is installed between the vibration source and its receiver, which is also the object of protection.
Vibration protection by absorption methods is carried out in the form of dynamic damping and vibration absorption. In the first case, the vibration energy is absorbed by a protective device that takes the vibration energy from the source onto itself (there is an inertial dynamic vibration damper). A protective device that increases energy dissipation as a result of increasing the dissipative properties of the system is called a vibration absorber. It is possible to combine these two properties simultaneously with the help of dynamic vibration dampers with friction. In most cases, a qualitative assessment of the degree of implementation of protection goals can be carried out in two ways:

1. determine the protection factor kw as a ratio:

Кц =j _ energy flow at a given point in the absence of a memory \ energy flow at a given point in the presence of a memory

2. determine the protection factor in the form of a ratio:

Kc j _ energy flow at the entrance to the storage device \ energy flow at the exit from the storage device Protection efficiency (dB)

49. Protection from energy influences. Generalized protective device and protection methods

When solving protection problems, a source, an energy receiver and a protective device are distinguished, which reduces the energy flow to the receiver to acceptable levels.

IN general case protective device (SD) has the ability to: reflect, absorb, be transparent with respect to the flow of energy. Let from the total energy flow W + coming to the memory, a part Wa, absorbed, part W is reflected and part W- passes through the memory. Then the memory can be characterized by the following energy coefficients: absorption coefficient τ = WαW +, reflection coefficient d = a /W + , transfer coefficient τ = W/W. Obviously, the equality p + a + m = 1 is satisfied. The sum α+τ =1– p=v (where v = W^W^) characterizes the unreflected energy flux W that has passed into the memory. If α = 1, then the memory absorbs all the energy coming from the source, at p = 1 the memory has 100% reflectivity, and the equality τ = 1 means the absolute transparency of the memory: the energy passes through the device without loss.

In accordance with the above, the following principles of protection can be distinguished:

1) the principle under which p → 1; protection implemented due to the reflectivity of the memory;

2) the principle under which α→1; protection impl-syat due to the absorption capacity of the memory;

3) the principle under which τ → 1; protection is carried out taking into account the transparency properties of the memory.

In practice, the principles are usually combined, obtaining various methods of protection. The most widely used protection methods are isolation and absorption.

Isolation Methods are used when the source and receiver of energy, which is simultaneously the object of protection, are located on different sides of the charger. These methods are based on a decrease in the transparency of the medium between the source and the receiver, i.e., the fulfillment of the condition τ → 0. In this case, two main isolation methods can be distinguished: a method in which a decrease in the transparency of the medium is achieved by absorbing the energy of the memory (Fig. 6.27, A), and a method in which a decrease in the transparency of the medium is achieved due to the high reflectivity of the memory (Fig. 6.27, b ).

At the core absorption methods lies the principle of increasing the flow of energy that has passed through the VZU. There are 2 types of energy absorption by the memory: the absorption of energy by the memory itself due to its selection from the source in one form or another (characterized by the coefficient α, Fig. 6.28, A) and energy absorption due to the high transparency of the memory (characterized by the coefficient τ, Fig. 6.28. b).

Rice. 6. 27. Methods of isolation when the source and receiver are located on different sides of the memory; A - energy is absorbed; b– energy is reflected

Rice. 6.28. Absorption methods when the source and receiver are located on the same side of the memory:

A - energy is taken; b- energy is passed

Qualitative assessment of the degree of implementation of protection goals is carried out in two ways:

1) determine protection factor kw:

kv= energy flow at a given point in the absence of a memory .

energy flow at a given point in the presence of a memory "

2) determine the protection factor:

Protection Efficiency (dB): e=10lgkv

50. Protection from dangers in the technosphere. Protection from the dangers of technical systems and production processes.Vibration protection .

Vibration isolation. Between the source of vibration and its receiver, which is simultaneously the object of protection, an elastic-damping device is installed - vibration isolator -s small transfer coefficient. When the system is excited, the protective device located between the source and the receiver acts on them with the reactions FR and FR . .

There are two types of excitation: power and kinematic.

In the case of force harmonic excitation by the force F 1 = Fme jwt, the purpose of protection is usually to reduce the amplitude of the force FR , transmitted to the receiver. With kinematic excitation, the goal of protection is usually to reduce the transmitted displacement. The degree of realization of this goal is characterized by a dynamic protection factor k x , equal to the ratio of the source displacement amplitude to the receiver displacement amplitude. It can be shown that k x = z/z r

In general, the energy protection factor can be expressed as k W =k F k X .

Elastic materials, primarily metal springs, rubber, cork, and felt, are used as vibration isolators. The choice of one or another material is usually determined by the amount of required static deflection and the conditions in which the vibration isolator will work.

Rubber has a low density, adheres well to parts, is easy to form into any shape, and is commonly used for vibration isolation in small and medium-sized machines.

Metal springs are usually used when a large static deflection is required or when they are working.

Dynamic vibration damping. Vibration protection by absorption methods based on general principles carried out in the form of dynamic damping and vibration absorption.

With dynamic damping, vibration energy is absorbed by the memory. This device, which takes vibration energy from the source - the object of protection - onto itself, is called inertial dynamic vibration damper. It is used to suppress monoharmonic narrow-band oscillations. A protective device that increases energy dissipation as a result of increasing the dissipative properties of the system is called vibration absorber. It is possible to use combined protective devices that simultaneously use the correction of the elastic-inertial and dissipative properties of the system. In this case, one speaks of dynamic vibration dampers with friction. Inertial dynamic dampers are used only in cases where the frequency of the driving force is strictly fixed in the operating conditions (for example, to dampen vibrations of alternator poles)

Vibration absorption. Vibration absorption - a method of reducing vibrations by strengthening internal friction processes in a structure that dissipate vibroenergy as a result of its irreversible conversion into heat during deformations that occur in the materials from which the structure is made and at the joints of its elements.

The vibration absorption method is aimed at obtaining increased values of the loss coefficient in the structure (table. Value)

Currently, vibration absorption is carried out mainly through the use of structural materials with increased value loss coefficient and vibration-absorbing coatings.

Promising in vibration absorption is the application of highly efficient vibration-absorbing materials to the oscillating surfaces of structural elements. They can be made on the basis of copper, lead, tin, bitumen and other materials. A multicomponent system based on a polymer capable of scattering mechanical energy in large quantities with major deformations. The main components of the polymer system are plasticizers (they give the polymer the required combination of elasticity and plasticity properties) and fillers (they give the material the necessary performance properties).

Vibration absorption efficiency

where L η and L η +. – levels of dissipated energy before and after the implementation of vibration-absorbing measures.

51. Protection from dangers in the technosphere. Protection from the dangers of technical systems and production processes Noise protection .

To reduce noise levels, technical, construction, acoustic and organizational measures are used, as well as personal protective equipment (GOST 12. 4. 051-87 - Personal protective equipment for the hearing organ). These measures include: 1. Noise suppression in sources (replacement of impact interactions of parts with non-impact ones; replacement of reciprocating movements with rotational ones, use forced lubrication of rubbing surfaces, use of "low-noise" materials, static and dynamic balancing of parts, use of noise suppressors, soundproof casings) 2. Noise propagation prevention - sound insulation and sound absorption. dB and For soundproofing, dense, rigid, massive partitions are used. In this case, the weakening depends on the mass of the partition, and not on its material. Greater attenuation is achieved with layered baffles, with air gaps between the layers. In sound absorption, the sound is attenuated by the absorption of sound energy in the pores of the partition material. Along with porous materials, special mastics are used for sound absorption, which cover partitions and individual parts of machines. 3. Construction and organizational measures: (increasing the distance from the source of noise - the concentration of workshops with a high level of noise and their removal from other industrial premises. Since the intensity of noise in the premises depends not only on direct, but also on reflected sound, which can be reduced by increasing the sound absorption area of the room. Need to apply: coating internal surfaces rooms with sound-absorbing linings; placement of piece sound absorbers in the premises, closing of machines with soundproof casings; installation of screens (coated with soundproof materials) between the machine and the workplace; installation of soundproof machines; rational mode of work and rest; reduction of time spent in noise conditions; control of noise levels in the workplace. Ultra-thin fiberglass, nylon fiber, mineral wool, wood-fiber and mineral wool boards, porous half-vinyl chloride, etc. are used as sound-absorbing material. The thickness of the facings is 20-200 mm. In low rooms, only the ceiling is lined, since the walls in them practically do not affect the reflection of sound, and in high and elongated rooms, both the walls and the ceiling are lined. In some manufacturing processes, such as riveting, chipping, stamping, stripping, it is difficult or impossible to effectively reduce the noise . 4. Personal protective equipment against noise. If it is impossible to reduce the noise to the standard by the above methods, personal protective equipment is used - noise suppressors: auricle; - liners covering the external auditory canal (cork); - helmets that cover part of the head and the auricle.

52. Protection from dangers in the technosphere. Protection from the dangers of technical systems and production processes . Protection against electromagnetic fields and radiation

Electromagnetic waves arise from the accelerated movement of electric charges. Electromagnetic waves are interconnected distribution in space of changing electric and magnetic fields. The totality of these fields, inextricably linked with each other, is called electromagnetic field. The sources of electromagnetic fields are atmospheric electricity, cosmic rays, solar radiation, as well as artificial sources: various generators, transformers, antennas, laser systems, microwave ovens, computer monitors, power lines, measuring instruments, etc. Let's consider basic methods of protection against electromagnetic radiation. These include the rational placement of radiating and irradiating objects, excluding or weakening the impact of radiation on personnel; limitation of the place and time of stay of workers in the electromagnetic field; distance protection, i.e. removal of the workplace from the source of electromagnetic radiation; reduction in the power of the radiation source; use of absorbing or reflective screens; the use of personal protective equipment and some others. The effectiveness of the screen, or screening efficiency (E) can be calculated using the formula: E = Where I 0 is the energy flux density at a given point in the absence of a screen, W/m 2 ; I- energy flux density at the same point in the presence of a screen, W/m 2 ;

For protection against electric fields of industrial frequency , arising along high-voltage power lines (TL), it is necessary to increase the height of the suspension of the wires of the lines, reduce the distance between them, create sanitary protection zones along the route of the power transmission line in the populated area. In these zones, the duration of work is limited, and machines and equipment are grounded. A special type of electromagnetic radiation is laser radiation, which is generated in special devices called optical quantum generators or lasers. These devices are widely used in various fields of science and technology, including processing various materials(obtaining holes, cutting, etc.), in medicine (carrying out various operations), in communication systems for transmitting signals along a laser beam, for measuring distances, for obtaining three-dimensional images of objects - holograms, and in a number of other areas. When exposed to laser radiation on the human body, various biological effects occur, which depend on the energy and time parameters of the radiation and, first of all, on the energy exposure in the pulse, the wavelength and time of exposure to laser radiation, the type of irradiated tissue of the human body and a number of other factors. Energy exposure can be calculated using the formula: H \u003d E e t, Where H- energy exposure; Her - energy illumination (the ratio of the radiation energy incident on the surface area under consideration to its area); t- time of exposure to laser radiation. To the main collective means of protection against laser radiation include the use of protective screens and casings; the use of television systems for monitoring the progress of the technological process using a laser, as well as blocking and alarm systems; fencing of the laser-dangerous zone, the dimensions of which are determined either by calculation or experimentally. It is necessary to protect not only from direct laser radiation, but also from scattered and reflected radiation. For personal protection against electromagnetic radiation special overalls and dressing gowns made of metallized fabric are used (they shield electromagnetic fields), and to protect against laser action, attendants must work in technological gowns made of light green or blue cotton or calico fabric. To protect the eyes from exposure to electromagnetic radiation glasses of the brand 3P5-90 are used, the glasses of which are coated with tin dioxide (SnO 2), which has semiconductor properties.

Ionizing radiation causes a chain of reversible and irreversible changes in the body. The triggering mechanism of influence is the processes of ionization and excitation of atoms and molecules in tissues. The dissociation of complex molecules as a result of breaking chemical bonds is a direct effect of radiation. Ionizing radiation, when exposed to the human body, can cause two types of effects that clinical medicine refers to diseases: deterministic threshold effects (radiation sickness, radiation burn, radiation cataract, radiation infertility, anomalies in the development of the fetus, etc.) and stochastic (probabilistic) non-threshold effects (malignant tumors, leukemia, hereditary diseases).

Dose equivalent H TR - absorbed dose in an organ or tissue multiplied by the appropriate weighting factor for that radiation WR:

H t ,r = W r D tr .

The unit of equivalent dose is J kg "1, which has the special name sievert (Sv).

Values W R for photons, electrons and muons of any energy is 1, for a-particles, fission fragments, heavy nuclei -20.

Dose effective- the value used as a measure of the risk of occurrence long-term effects irradiation of the whole human body and its individual organs, taking into account their radiosensitivity. It represents the sum of the products of the equivalent dose in the organ N xT to the appropriate weighting factor for that organ or tissue wf.

where H t t is the equivalent dose in tissue T over time t.

The unit of effective dose is J kg "1, called sievert (Sv).

Extremely high flows of negative impacts create emergency situations (ES), which change the comfortable or acceptable state of the environment and transfer life to a qualitatively different state - the state of human interaction with the environment in conditions of high risk of injury or death.

Emergencies are divided into local, local, territorial, regional, federal and transboundary.

Local refers to an emergency, as a result of which no more than 10 people were injured, or the living conditions of no more than 100 people were violated, or material damage amounted to no more than 1 thousand minimum wages on the day of the emergency and the emergency zone does not go beyond the territory industrial or social facility.

A local emergency is one in which more than 10, but not more than 50 people were injured, or the living conditions of more than 100, but not more than 300 people, were violated, or material damage was more than 1,000, but not more than 5,000. minimum dimensions wages on the day of the emergency and the emergency zone does not go beyond the boundaries of the settlement, city, district.

A territorial emergency includes an emergency, as a result of which 50 to 500 people were injured, or the living conditions of 300 to 500 people were violated, or material damage amounted to 5 thousand to 0.5 million minimum wages and the emergency zone does not go beyond subject of the Russian Federation.

The regional and federal, respectively, include emergencies, as a result of which 50 to 500 or more people were injured, or the living conditions of 500 to 1000 or more people were violated, or material damage is from 0.5 to 5 million or more than the minimum wage and the emergency zone covers the territory of two constituent entities of the Russian Federation or goes beyond them.

A transboundary emergency includes an emergency, the damaging factors of which go beyond the borders of the Russian Federation or an emergency that occurred abroad and affects the territory of the Russian Federation.

The source of technogenic emergencies are accidents at industrial facilities. An industrial facility as a source of emergency situations is also understood as transport, economic, administrative and other facilities, if they are classified as hazardous.

Wartime emergencies can occur when weapons of mass destruction (WMD) are used. Nuclear, chemical and bacteriological weapons have mass destruction. These include the new principles of action being developed - infrasonic, beam, etc.

Nuclear weapon. To the most powerful means WMD refers to nuclear weapons, consisting of nuclear weapons (air bombs, artillery shells, missile warheads, sea torpedoes, depth charges and mines), delivery vehicles (carriers) and controls. In a nuclear explosion, a huge amount of energy is released, which is formed during a chain reaction of fission of heavy nuclei of some isotopes of uranium and plutonium or a thermonuclear fusion reaction of light nuclei of hydrogen isotopes (deuterium, tritium).

Chemical weapon. Chemical weapons are understood as a set of toxic substances (OS) and the means by which they are used. Chemical weapons are designed to destroy unprotected people and animals by contaminating air, food, feed, water, terrain and objects located on it.

Bacteriological (biological) weapons. It is disease-causing microbes and toxins designed to attack people, animals, plants and food supplies.

Let's consider the main types of emergencies of technogenic origin and methods for assessing their parameters.

Emergency chemically hazardous substances, chemically hazardous objects, zones of chemical contamination during emergencies. From a large number harmful substances, including those produced and used in industry (see clause 6.2), only a relatively small part can be classified as hazardous, and even more so as those that can lead to emergencies of various scales. Criteria for attribution chemical dangerous is the level of the average lethal dose. Chemically dangerous object(XOO) is an object, in the event of an accident or destruction of which mass injuries of people and environmental pollution with emergency chemically hazardous substances can occur.

Fires: physical and chemical bases, parameters.

Fire - this is uncontrolled burning outside a special hearth. It is a complex physicochemical process of the transformation of combustible substances and materials into combustion products, accompanied by intense release of heat and light radiation.

Explosion: physical and chemical bases, types of explosives, fire and explosion hazard technological processes in production.

Explosion - a rapid process of physical or chemical transformation of substances, accompanied by the release a large number energy in a limited volume, as a result of which a shock wave is formed and propagates in the surrounding space, which can endanger the life and health of people, cause material damage and damage environment become a source of emergencies.

Ticket number 40. Dangerous and harmful factors. protection from them. Measures of protection against discharges of static electricity, lightning protection.

Hello. It just so happens that today energy protection becomes relevant again. And this is against the backdrop of technological progress. And, perhaps, thanks to psychics, this relevance is increasing. Be that as it may, there is something so transcendent, but thank God, there is also protection from the dark and bad.

How to know if your field needs protection

This is very well stated in Miller's book, "100 Ways to Protect Energy". Let's name some of them:

it seems to you that someone is standing behind you or watching;
you hear someone calling you
longing or fear often falls on you;
you don't want to stay in own house;
you often get sick, are depressed;
things often break in your house, a tap flows;
you have few friends, relatives and others.

If you have noticed something behind you, then you need energy cleansing.

What to do?

First of all, do not wish harm to another person, do not envy, do not be angry. If you offended a person, ask for forgiveness, even mentally, but from the bottom of your heart.

If they said an unpleasant word to you, wished something unkind in their hearts, do not remember, do not take it to heart, forgive this person, do not let you recharge. Maybe he doesn't energetic vampire, was just in a bad mood, disarm him with a smile.

How to check a thing?

You were presented with some thing, be sure to check it for purity of energy.

The technique is simple: take a thread - 20 cm, tie it on Golden ring, hold over the gift. If the pendulum begins to spin, then this dangerous little thing, if it swings in your direction, then it has good energy. So you can check food, things, objects.

Energy protection and home cleansing

This side of our life is very important for health, well-being in the family, in money matters.

Ordinary salt will help in cleansing: take 1 tablespoon of salt in a bucket of water, wash the walls, ceiling, windows, change the water more often. Cleansing should be carried out between 11 and 12 hours.

More one great way : pour salt into a cast-iron skillet to cover the bottom, ignite on fire for about an hour. The salt will be black or simply with black spots, but as the dwelling is cleansed of negative energy, it will gradually turn white. Walk with a frying pan around the apartment. In contaminated places, the salt will "shoot".

Take a church candle, walk through the dwelling, stopping in the corners, read a prayer. Go around the house from the threshold in a clockwise direction.
Light a twig, juniper, put out the fire, smoke will come from the twig. Go around the whole room three times.
Place wormwood branches by the bed, your sleep will be serene and calm.
Hang fishing floats in a conspicuous place near the door. none devilry will not enter your house.
To fill the house with clean energy, do not keep broken cups, plates at home, take out the trash, do not leave unwashed dishes, mark the floor from front door towards the kitchen. Place the broom upside down.
Sprinkle the house, be sure to bring it into the house.
All negativity will help to collect garlic, which has a powerful magic power. Spread garlic cloves in the corners of the apartment, burn them away from home from time to time, replace them with new ones. They cannot be eaten.
A very good way to remove negativity from home. On the way to the house, wind the ball (mentally), coming closer, hang it on the trees, also mentally. At the door of the house, look back and with pure thoughts say: “Let all bad things become good!” and look at the sky.

How to cleanse your body

Light a candle, look at it for 10 minutes, just do not blow it out, but extinguish it with your fingers. Do this ritual for 7 days.

A simple bell will help clear the chakras on your body and the body of your loved ones. Lie down, relax, start ringing first at the crown, then at the forehead, then at the throat, and so down to the feet. The ringing clears the chakras, drives away bad energy. Also clears space bell ringing churches.

Walk more often in the park and forest, where there are a lot of trees. If you notice beautiful tree, approach him, hug him, ask for protection, share your sorrows with him. When you leave, do not forget to thank him for his help.

How to protect your energy field

Prayer serves as protection from evil spirits, especially to the Archangel Michael and his Guardian Angel. You will always find these prayers in prayer books.

There are other ways to protect energy.

Place an energy wall between yourself and the enemy, let it be brick, monolithic, through which not a single vampire can reach you, the wall will absorb all enemy attacks. But keep in mind, the wall protects as long as you keep it visually.
Mentally erect a mirror wall in front of you, moreover, the mirror side should be directed at the enemy. He will only see himself, not you! But it also requires constant recharging.
You can put an energy pyramid that not only protects, but also heals. How to do it? Mentally create the correct tetrahedral pyramid of golden color. The base should be at your feet, and the top should rise 0.5 meters above your head. The dimensions are as far as you can manage. The angles must be directed exactly according to the compass. It does not last long, but it heals from diseases, collecting positive energy inside.

Shield of Shambhala

Energy protection is not a myth or fiction, but a real necessity for many people. Analyze for yourself why some people are incredibly vulnerable to any negative influences, aggressive emotional attacks in their direction, while others are absolutely invulnerable and no matter how much you kick them, like peas against a wall. Some people get a little nervous, quarrel with someone and immediately start to get sick, while others are calm and strong, and all the negative energy from them is like water off a duck's back. Some constantly complain that they were once again jinxed, damaged, etc., while others live for themselves and rejoice and nothing negative sticks to them at all :)

Why is this happening? What determines a person's protection from negativity? How can you, if you are still vulnerable, learn to protect yourself from negative energy influences? Let's talk about everything in order.

Of course, a lot depends on the person himself, on his strength of mind, goodwill, calmness, on such qualities as self-confidence, invulnerability, the ability to control one’s emotions and state, to be calm and invulnerable in any situation and others. But the training of personal qualities is a separate and very large topic, it is a process purposeful development and years of hard work. And not everyone is able to change themselves by forming new personal qualities, but you need to be able to defend yourself from negativity or protect your loved ones, for example, your own children, here and now. It is for this that there are techniques for setting up energy protection, which we will consider.

What is energy protection and how does it work?

In order to better understand what energy protection is, I recommend reading several articles on our website:

Energy protection is of several types:

1. Energy protection, which is part of the structure of a person’s energy, namely, is built into his astral subtle body or into a capsule protecting him (the Patron of a person), for more details, see the article on

For this protection to work, the subtle bodies of a person and in particular the astral body () must be trained and energetic, that is, elementarily a person must have energy for protection (its disclosure and work).

2. Energy protection, which a person creates by himself with his own will and thoughts, setting a certain program of work for it. But, again, he must have energy for this, and he must master the skills of creating an energy shield, a shell (cocoon), etc. A person can put this protection not only on himself, but also on other people, for example, to protect his children or loved ones.

3. Energy protection, which is given by the Higher Forces, namely the Patrons of man. And actually, what Patrons a person deserves (Light and tall or weak and negative), such will give him protection. Accordingly, they provide protection from dark influences from negative forces and people. And they will protect a person either from light energy and influence, which most often happens (this is always to the detriment of the soul), or from other dark forces that are drawn to their client.

The protection it gives Thin world can be very different, depending on what a person deserves, he is worthy or he is a scoundrel, he is strong or weak. Everything affects what kind of help will be.

"Protected by God"- this also applies here. One of the most powerful defenses- this is the Faith of a person, in His protection and Patronage, in His Love and Omnipotence. And the stronger a person's Faith and the more righteously he lives, the more powerful his energy protection will be.

There is even an anecdote on this topic, when Dracula pursues a parishioner, overtakes him in a cemetery, bends over him, and he is trembling all over and puts a Christian cross in front of him with trembling hands. Dracula calmly takes the cross from the hands of the parishioner and tells him “for it to work, you need to believe in it!”:)

So, any protection directly depends on a person's faith as well.

How to put energy protection from the negative influences of other people and forces?

Consider the technique self-creation arbitrary energy protection:

1. Your initial state should be calm, strong and positive, that is, there should be energy to create protection. Exhausted and tired to create good protectionfail. Therefore, put yourself in order, calm down, fill yourself with a stream of pure white-golden energy from above, through the top of your head. Fill your whole body with energy, wave after wave, several times, like a hollow vessel.

2. Protection is created mainly with the help of the energy of the chakras, and therefore you need to turn on these chakras, or at least imagine them shining and filled with a dense white-gold light. Ideally, when the chakras are activated, you feel a pleasant pressure in the forehead, warmth and light in the center of the chest and in the abdomen. This means the chakras are turned on and there is energy in them.

3. Mentally determine for yourself what kind of protection you need, why you need it and how it should work. This will completely determine the energy and programs of your protection, its effectiveness and functionality. Let me remind you that the motives must be pure if you want to be helped in its creation.

Protection can be in the form of a shield of fire , which does not let negative energy, emotions and other flying influences through. The energy shield can be made mirrored and even a program can be set so that all the negative is reflected and flies back to the author (so as not to be in the habit). When such protection works, you can observe the picture: the more a person screams at you and throws out negativity, the worse it gets for him, and you feel calm, without destruction.

Or maybe in the form of a cocoon, something like a flask within which you are. This flask must be open from above, so that a stream of light energy enters. The outer walls of this flask can also be made mirrored. And then, this is what program you will set - either the negative is reflected and flies back to the owner, or it flows down the walls of the mirror into the ground (if you want to spare a person). You choose.

And one and the second protection can be put on other people if you are directly related to them (children, relatives).

4. In order for protection to be created, it is enough to imagine it, for example, imagine a glass-mirror bulb around itself, with a reflective surface outward. And also, imagine how a stream of white light (ray) comes out of your Ajna (center of the forehead) and you carefully pass this stream along the walls of the protection being created, imagining how its walls become energetically filled. Further, by passing the beam from along the very walls of the protection, you set the program, imagining how the protection should work (all the negative flying into you from the outside flows down the walls, flies off or flies back, nothing gets inside the protection). Protection has been created.

5. But in order for the energy protection not to be destroyed primarily by you, you need to be in the most calm and benevolent state. If you start to get nervous or emotional, you yourself will destroy the protection from the inside with your own negative emotions and reduce all efforts to create protection to zero.

Also, with the help of its own energy, not only a cocoon is created, but also an energy shield, in other words, a wall, for example, between you and an enemy who attacks you energetically.

In fact, there are a lot of options to protect yourself, there would be a desire to immerse yourself in the topic and practically learn all this. But it is best to learn the practice of working with energy from a Mentor or, even better, from a Spiritual Teacher. Although you can start with the implementation of the practical recommendations given in this article.

If you think that you need the help of a mentor in order to learn how to put up a defense or master the initial techniques of meditation and energy work, you can contact me. E-mail me

These tips will help you protect yourself from various manifestations negativity.

Each person has an energy field - protection from negative impact from outside world. However, if it is weakened, it becomes easier to draw energy from it. Energy vampirism is very common, and sometimes a person who feeds on other people's emotions and vitality is difficult to determine by his behavior.
So, no matter what happens, remember that everyone can protect themselves from harmful effects. For this you need:
rest in time;
do not start a starting cold or other illness;
use positive attitudes- an optimistic person rarely becomes a victim of an energy vampire;
strengthen immunity and general state organism;
use meditation and other spiritual practices to restore the energy field.
Thanks to these simple advice you can strengthen your biofield, reducing the risk of harmful effects. However, what if it did happen?

Method number 1: protection against energy attack

The simplest thing you can do when meeting a person who encroaches on your energy health and psychological comfort is to avoid communicating with him. Very often, vampires can be identified by some signs. These are aggressive people. They are constantly on edge and literally run into scandals and quarrels. This behavior is one of the simplest ways to piss off the victim by violating her internal balance. To avoid becoming a victim, use these guidelines:
do not enter into a conflict with a person;
avoid looking into his eyes;
try to get away from an unpleasant person;
smile and laugh more often;
agree with everything said;
don't lose your temper.
It is known that it is not so easy to get the energy of a person, so the interlocutor will definitely provoke you to emotions. If you are unable to stop the conversation and leave, control yourself. Agree with everything said and show imaginary humility. Use the most important weapon - a good mood. Even if you feel that you have begun to boil, force yourself to laugh in the face of your opponent, imagine something positive. These techniques will help you beat back the pressure. However, upon returning home, take care of restoring your protection. The mantra of cleansing from negativity will help you with this.

Method number 2: protect against energy attack

Use various amulets and charms to protect yourself and your loved ones from negative impact. One of the most effective means of protection are amulets, known since ancient times. Our ancestors used them to prevent energy attacks.
Aspen. This tree is known for its unique properties, which are called to stand up for the protection of man. You can purchase a cross from this material in a temple or church. You can also use a small part of a branch. Using a knife, make a small stick, pointed at one end. This amulet should be worn closer to the body without taking it off. If you get attacked, the tree will change color. It will darken, taking the hit on itself.
Holy water. This is perhaps the most famous means of protection. Holy water must be washed in the morning and evening, and also used as a talisman. Pour it into a small flask and carry it with you. It also helps with headaches - a few drops on whiskey and a prayer will save you from unpleasant symptoms.
In order to protect yourself from the evil eye and damage, use powerful amulets. This type of attack, unfortunately, often occurs to this day. These can be unintentional actions, but with a strong impulse - harsh words on a wave of negativity, a wish for illness, and many other bad words. If damage is done intentionally, you need not only to protect yourself, but also to neutralize the consequences of the negative impact. by the most in a simple way is prayer. To do this, you need to say out loud what happened to you in front of the icon and ask for protection from Higher powers. Remember that you need to let go of the situation and not hold a grudge against the person who used his powers to harm you. The Supreme Court is always fair, and punishment will find the guilty.

Method number 3: protecting the house from negative influences

It has long been known that the house is not only a place in which we live, but also a powerful source of positive energy, which is able to protect the hosts. In order for the house to help you, give you additional strength and protect you from negativity, follow it:
use amulets to protect your home;
clean more often - trash and broken things create a stagnation of energy;
call for help brownie - this entity when right attitude able to resist the negative from the outside;
get rid of dubious items - these can be pins, needles, bags with various fillings. The so-called pads are most often located at the threshold, gates or in doorways.
If a person with heavy energy has visited your house, use rituals that are designed to cleanse the space of its negative influence. Light a candle and walk around the house, looking into every corner. Sprinkle the corners with holy water, and pour salt in front of the threshold. In order for unwanted people to forget the way to you, use a conspiracy that will block their path to you.

Method number 4: protection against psychological attack

Psychological attacks are a way to provoke the victim into emotions. Psychologists and astrologers advise using simple, but effective methods to protect against such influence. By constantly practicing, you not only increase your resistance, but also strengthen your biofield:
lead healthy lifestyle life;
do what you love;
eat colorful fruits and vegetables;
meet friends more often and spend time not only in cafes and restaurants, but also in nature;
tune in to spiritual growth - meditate, pray, use all kinds of techniques to develop intuition;
exclude unwanted people from your social circle;
use the techniques of protection by the power of thought - imagine yourself surrounded by a strong cocoon that extinguishes the negative influence.
Psychological attacks should not scare. This is a challenge that will help you become stronger. Regular practice strengthens willpower and health. A good method of protection against psychological attack are mental barriers. Faced with a person who is set up for conflict, mentally create a wall, a curtain, a dome - whichever is closer to you. Develop your imagination, and you will be able to create an impenetrable defense.

Method number 5: protect against psychological attacks

Protect yourself from people who have marked you as their victim and donor vital energy, necessary. To do this, use the knowledge of the ancient Slavs. They collected information for centuries and invented many effective ways protection.
First, get to know your strengths given to you by nature at birth. Our ancestors, not familiar with modern astrology, singled out 16 Zodiac Signs and called them halls. Each person had his own patron deity and a talisman tree. By the date of your birth, you can find out which of the Slavic Gods to seek protection from. Also use a tree that protects you. From a small part of it, make yourself an amulet or purchase it in a specialized store. Also, for greater confidence, periodically get out into nature in order to be able to contact with a living plant. It takes away negative energy and gives vitality.
Secondly, do not forget about such things as good luck charms. If fortune is on your side, then you are protected from all kinds of attacks. Almost any thing can be turned into a happy talisman. There are things that are often with you in moments of joy, pleasant surprises, victories and achievements. It can be a keychain, pen, jewelry. Take the object in your hands, hold it for a while and mentally turn to it with a call for help.
Thirdly, these are stones according to the Sign of the Zodiac. Powerful energy natural materials can give strong protection, as well as bring well-being to life. Often such amulets become an additional source of energy, a kind of battery that is activated when your vitality at the end of.

Method number 6: protection against energy attacks of settlers and entities

Such influences can cause a lot of inconvenience and suffering. It all starts with a simple malaise and fatigue, and may even end sudden death. unwanted guests demons, larvae, spirits can become in your biofield. You need to get rid of them at the very beginning, until such a symbiosis has led to devastating consequences. In order to protect yourself, use all the above recommendations, and also carefully monitor your health. Usually, the entities act covertly until they completely attach themselves to your energy source. If you begin to understand that something unusual is happening to you, use methods of protection and getting rid of negative influences. The most common signs of a settler are:
protracted illnesses;
constant fatigue;
apathy and unwillingness to move forward, to enjoy life and communication with loved ones; frequent shifts mood, aggression;
constant failures;
detachment and desire to hide from the world;
fear, anxiety, nervous state.
You can deal with the expulsion of such an entity yourself.

Method number 7: self-evil protection

A special type of attack is the self-evil eye. A person who is negatively minded can harm himself unconsciously. Most often this happens when Bad mood and failure makes you uncomfortable. To reduce the risk of such exposure, negative statements and thoughts in your address should be excluded.
A mirror is an object with which we come into contact every day. Use it as a weapon to fight negativity. Never say negative words about yourself while looking at your reflection. Use positive constructions, looking into your eyes, reassure yourself that everything will be fine. This psychological method helps well with depression, failures at work and in personal life.
You need to get rid of the self-evil eye yourself. This struggle with your negative manifestations, which will strengthen you and give you self-confidence. Use meditation as a way to describe your problem and find a way out of the current situation. Start your morning with positive emotions: listen to pleasant music, play sports, eat more fruits and vegetables.
It is important to remember that willpower can work wonders. You need a firm belief that you are doing everything right and for the good. Try not to cause inconvenience to others, be benevolent and polite. And in no case do not pick up lost things from the ground - many of them also carry negative energy that can cause you a lot of trouble.