How to make a cone with segments out of paper. How to make a cone out of cardboard or paper

We need to make a circle on paper, divided into 4 equal sectors. If you use a compass, for greater convenience, we advise you to first draw the coordinate axis, and only then draw a circle from the main point. The same must be done with a homemade compass. In the version with a saucer, you will first have to draw a circle, and only then divide it into sectors with two perpendicular lines.

To get a wide cone, cut out one part of the sector, the middle one - half. For a small one, you will need to cut 3 parts. Once you have decided on a size that can be easily reduced at any time, cut out the desired sector. To secure the figure, leave a small edge on one side to glue the piece together with an overlap.

It remains only to roll and fix the workpiece. This is done using glue, tape or double-sided adhesive tape, the choice is yours.

How to make cones out of paper, we figured it out. Let's see what we can do with this shape.

Decorative Christmas tree

Cover the cone with tape. Soak the threads in PVA glue and wind them around the pointed part. Wait until the entire structure is dry, then remove the cone. The Christmas tree is ready, all that remains is to decorate it with various toys or beads. Don't forget to put a star on top.

Another option is possible. There is no need to pull out the cone; cover it with cloth or paper. Add tinsel, rain, serpentine or rhinestones. In general, whatever your heart desires. Unusual New Year's souvenir ready.

Gift bag

To make this craft, use all of the supplies listed above plus crepe paper and ribbon.

Make a blank for the cone. Before gluing the arc, glue corrugated paper to the bottom along the entire length. Corrugated paper assumes the presence of folds, glue the paper in a slightly folded state. Next, secure the cone itself. Decorate the resulting packaging base with color images or stickers.

The bag is ready! You can put a gift in there and tie it with a ribbon and give it to your loved ones.

Well, now with a cone you can do various crafts, invented independently or found on the Internet. But the main thing is that children can join in this simple entertainment. This type of homemade craft will delight your little pranksters and unite the whole family around the common table. Make DIY crafts and be happy! There are many options paper crafts. Thanks to step-by-step master classes, you will find out with your own hands.

Sheets of paper allow you to create a wide variety of objects. It can be complex crafts, like a high-quality notebook or a model of a ship, or maybe even very simple ones. For example, some people are interested in how to make a paper cone with their own hands. Such a simple figure can be used for various purposes, including to create a Christmas tree decoration.

First, you need to understand the basics of creating cones. Then, with the help of various additional elements, from them it will be possible to build original elements decor, even in the form of animal faces. The most common craft made from a paper cone is a small Christmas tree.

How to make a paper cone with your own hands?

The materials used are completely determined by why the cone is being made. The most simple options You don’t even need to glue it from a regular sheet of paper - just fasten it with some kind of clamp. If you have to build a beautiful Christmas tree toy or a decorative element, it is better to find a suitable one colored paper or cardboard.

To create an even cone you will need a round sheet. It can be done different ways, for example, cut it out from a regular A4 format, marking the required area with a compass. If you don’t have a compass at hand, you should use a pencil and string. The thread should be equal to the radius of the future circle. It is held taut with a finger in the center of the sheet, and a circle is drawn with a pencil.

How to make a paper cone with your own hands:

On ready circle you need to draw two lines to make a cross dividing the sheet into four even parts.
Then one of the quarters is cut off.
It remains only to fold the required form and secure it with glue or clothespins.

After this, the cone is ready, but, if desired, you can make a bottom for it. To do this, place the resulting figure on a sheet of paper. A circle is drawn around it, but before cutting it out, about another centimeter is added to the shape. From this distance you need to create teeth with which the bottom will be attached to the cone. They are coated with glue and attached.

When working with thin paper you can make a cone out of ordinary rectangular sheet. To do this, it is twisted, as shown in the photo below, and then the excess edge is cut off. Sometimes it can be used to create the base of a cone, or it may be enough to simply bend it inward.

Creating a Christmas tree

From a ready-made paper cone you can create an excellent Christmas decoration in the form of a Christmas tree. A wide variety of materials are used, but general system manufacturing remains common.

Tape or cling film is glued to the paper cone.
Thick woolen threads are attached on top of them, using PVA or other suitable glue.
After they dry well, you need to remove the cone from them. The threads must retain its shape.
All that remains is to add elements for decoration. It may be small knitted balls, glitter paper stars or any other materials you have on hand.

For creating Christmas tree You can use a completely different technique. Papier-mâché will come to the rescue, with which you can also make a paper cone. Of course, much more material and time will be required, but the finished structure will be durable and stately.

For work you will need newspaper or magazine trimmings. Almost any paper will do. A base is also needed. You can take any plastic cone, for example, from children's toys. It will not be damaged during the manufacturing process.
The selected base is coated with PVA and a layer of paper is placed on it. When it dries, you can apply the next one. In this way, the process continues until sufficient thickness is gained.
Now you need to remove the base. Sometimes you have to cut the shape to do this.
Then, instead of the base, you can mark a rod inside, which will act as a frame.

All that remains is to glue the cut halves back together, and you can start decorating the future Christmas tree. For example, you can actually paint it or wrap it with threads, as in the photo below. This scheme will allow you to create any variants of Christmas trees, depending on your desire and the existing base.

What else can you make from a paper cone?

A paper cone blank can be used to make packaging for a sweet gift. To do this, on the edges, with inside, add pieces of double-sided tape, or simply coat it with glue.

Sheets of corrugated paper are then placed over these areas.

To make it fit beautifully, you need to make small folds.
After this, the workpiece with paper is glued into a cone.
Candy or other items are placed inside the craft, and corrugated sheet The top is tied with a ribbon, forming a pouch.
On ready packaging You can add other decorative elements.

The paper cone can be used for other crafts as well. For example, if you make it from thick cardboard, then, using fabric, you can create such animal toys or Christmas tree decorations.

Video instruction

For the Christmas tree. All products are usually made on such a frame. Of course, you can buy a ready-made foam cone, but, firstly, this is not a very cheap option, and, secondly, you will be limited by the size of the product that you found. Best idea — self-production basics. Explore possible options. Use a working method that suits you.

Manufacturing methods

If you are wondering how to make a paper cone for a Christmas tree with your own hands, you can rejoice, since there are several possibilities for making a base for decoration:

Roll the sheet according to the bag principle.
Glue according to the template drawn on the basis of the circle.
Make using the papier-mâché method using a bulk piece.

In the following sections you will learn more about how to make a paper cone for your Christmas tree. Photos will clearly illustrate the work process and the result obtained. Each of the methods is quite simple to use, and which one is more convenient is up to you to decide.

Tools and materials

Whichever manufacturing method you choose, to make a paper cone for a Christmas tree, you will need the following:

A sheet of whatman paper, cardboard or colored paper.
Pencil.
Compasses or stencil (plate, dish, basin).
Scissors.
Glue or heat gun (you can take double-sided tape or a stapler).

That's all that's needed. In some cases you will also have to use a knife.

How to roll a cone from a sheet

This method is simple and easy. Even a child can do the work. To understand how to make a cone out of paper for a Christmas tree in this way, just take a rectangular or square (whatever is available) sheet of thick paper and roll it into a ball. The more you wrap the workpiece, the narrower (slimmer) the cone will turn out.

To secure the product, you can glue the seam with PVA, a heat gun, fasten it with a stapler, or use double-sided tape.

Next important stage there will be a trimming of the bottom, since when you twist a rectangular sheet at the bottom you will not get a straight edge, but with a corner on one side. Trim the part as carefully as possible, because this will determine how parallel the base of your tree will be in relation to the horizontal plane.

How to make a straight bottom

From the previous section, you learned how to make a Christmas tree paper cone using the rolling method from a rectangular piece. If you can’t make a neat bottom by simply cutting it with scissors, and you need to make a lot of Christmas trees, you can make an auxiliary device for leveling. It is a template made of cardboard with a round hole corresponding to the diameter of the base of the cone.

You can make such a tool like this:

Take thick cardboard, for example, corrugated or glue a workpiece from several layers.
Draw a circle with a compass or outline a suitable template (plate).
Cut out a hole.

You need to use this tool as follows:

Insert the rolled-up sheet cone into the hole so that the tool's circumference matches the bottom of the cone.
Take a sharp knife and cut off the excess paper.

In front of you finished cone with neat bottom.

How to make a paper cone for a Christmas tree: step-by-step instructions

You can make the base in another way using a previously prepared template. In this case, there is no need to level bottom part, as it will turn out neat. To work with this method, you need to do the following:

A neat cone is ready.

How to glue the base

In any of the presented methods for making a cone, the result is a hollow workpiece with a thickness equal to the selected sheet of paper or cardboard. If you are satisfied with this version of the Christmas tree, you can start decorating. However, most often cone-trees are not hollow, but have a solid base. It not only gives the workpiece a completed look, but also gives additional strength to the base, which is important, since decor that has certain weight, and the structure should not collapse under it.

The work options are:

If you rolled the cone from a rectangle, trace the circle of the base on the prepared cardboard.
If you used a tool to level the bottom, use the hole in it as a stencil for the base.
While working with the template, you can also trace the base of the manufactured cone or calculate the diameter of the circle using the formula by measuring the length of the circle (the bottom of the cone).

As for gluing parts, this can be done with a thermal gun without additional gluing allowances, but simply end-to-end (connect the wall thickness of the cone to the circle of the base). If you use ordinary PVA, it is worth considering allowances for gluing, since the strength and setting speed of this composition is less than that of hot melt adhesive. Allowances can be made both on the base part and on the lower part of the cone. It is better to hide the allowances inside the voluminous workpiece.

How to make a large paper cone for a Christmas tree with photo

If you decide to make an interior Christmas tree that you plan to put on the floor to decorate the room, then you will have to work a little more with the creation of the frame than for the desktop version. The most important thing for such a cone is strength, therefore, in addition to the cardboard wall, it is worth considering frame elements. It can be a wire or a rod made of another material (a wooden stick, for example). It will go through the center of the cone, acting as an axis. It's good if you secure it firmly at the base.

It is also easy to make additional stiffening ribs in the form of cardboard circles of the appropriate diameter, which will be glued along the entire height of the cone at an equal distance.

If you are going to make a cone for big Christmas tree, a certain difficulty can be caused by drawing a circle of the appropriate diameter, which cannot be made with an ordinary office tool. In this case, you can choose one of the following methods:

Papier-mâché technique

This section will also teach you how to make a paper cone for your Christmas tree. Large or small you need the size in in this case doesn't matter. The workpiece is strong and solid even without an additional frame. This option is suitable for those who do not have a single dense sheet to make a cone of the appropriate size.

To work with this method, any paper is suitable, even newspaper or old magazines, however, you will need a blank base. You can use a plastic cone from children's construction set(the original part will not deteriorate and will return to its place), plasticine, plaster, polystyrene foam. Using one template you can make many papier-mâché blanks. Proceed like this:

Cut or tear newspapers into small pieces.
Wrap the prepared template in plastic wrap and coat it with PVA.
Apply a layer of paper pieces onto the wet glue.
Dry the first layer and then apply the second using the same technology.
Work in this way until the required thickness of the workpiece is achieved.
Cut the resulting shell and remove the original part.
Install a frame rod if necessary.
Apply a few more layers to seal the halves together.

All is ready.

You learned how to make a paper cone for the Christmas tree. Start by making the base and then start decorating it.

print Thank you, great lesson +0

Cone is one of the simplest geometric shapes, which you can do yourself thanks to our step by step instructions with photos. Moreover, its height and width can be controlled and you can create a figure that you like.

Paper
Stationery glue
Scissors
Ruler
Pencil

Step-by-step photo lesson:

We select paper for the future cone. Can be used from plain white copier paper to designer cardboard. Each has its own advantages and disadvantages. For example, if you make a cone from plain white paper, the craft will be very fragile. This is its disadvantage, but its advantages include the availability of this material and its low cost. And here designer cardboard has opposite meanings. Therefore, we will choose the middle, namely, colored half-cardboard. It holds its shape well, has many colors and is more static to the environment.
Then we draw a circle. Its diameter will determine the size of the finished cone.

Carefully begin cutting out a circle along the contour.

Then divide the circle into four equal parts.

Then we will determine what kind of cone should be made. If we take one part out of four, we get a small thin cone with a sharp tip. To create a cone with a wide base and short length, cut one half from the circle and glue a shape from the remaining three. But for our cone we will select an average diameter for the base, which will give a short length. To do this, cut out half of the circle. By the way, this way we get two cones at once!

We take the edges and glue them with office glue. If there is no glue at hand, then you can do it quickly with a stapler, just by making two clicks.

In the end, after the figure dries, we get such a paper cone with our own hands. Some people still prefer to make a base. So if you have the desire and free time, then why not do it?!

Video lesson

In order to create Christmas mood it is not necessary to install a large living or artificial Christmas tree, you can make it small New Year's beauty from cardboard or paper with your own hands. For this you can use various techniques and options for making such a Christmas tree. In order to make a Christmas tree, you need to make the base of the entire tree.

How to make a cone for a Christmas tree

A beautiful Christmas tree made of cardboard and paper can not only give a New Year's mood to your home, but is also ideal as a gift for family and friends who will not remain indifferent to this holiday gift. There are a huge number of options for making a holiday tree. You can also involve your children in the manufacture of such a cardboard tree, who will be passionate about this activity. This skill not only captivates them, but also helps to reveal their creative abilities.

Reference! All cardboard Christmas trees have the same cone-shaped base. If you decide to install the New Year's beauty on a wall or table, then you don't have to make a bottom for the cone. But, if you make a hanging Christmas tree, then the bottom needs to be made.

What you need to make a Christmas tree cone

To make a miniature Christmas tree you will need following materials and tools:

thick paper or cardboard;

scotch;
scissors;
glue;
a simple pencil;
ruler;
compass;
materials for decorating the tree cone.

Reference! As such decoration material, you can use beads, tinsel, beads, cones and much more that you have at hand.

The design can be made of colored cardboard or paper, or white. It all depends on your taste preferences.

The thickness of the cardboard or paper must be wiped based on the weight of the future decoration of the Christmas tree. If you intend to use a lot of decor, then choose dense material as the basis of the design. Since when choosing a thin base, the tree will not hold steady, and will fall on either side, or may even fall.

DIY Christmas tree cone: step by step

Make a cone for Christmas tree there are several variations. You can fold the cardboard into a little bag. Then you need to cut off the excess paper or whatman paper at the base so that the cone can stand straight. This must be done evenly so that the tree stands firmly and does not fall. The sides of the cone must be glued to each other. To do this, you can use either tape or PVA glue. This method is easy, since you do not need to take specific measurements, but you can do everything by eye.

If it was decided to make the bottom of the spruce structure, then you must adhere to following rules. It is necessary to replace the diameter of the base of this design. To do this, you can use an ordinary ruler. In order to calculate the radius of a circle, it is necessary to divide the diameter into equal parts.

Take a compass and draw a circle with it the same as the base of the cone of your future New Year's tree. The circles must be identical, their edges must match. In order to attach the drawn circle to the base of the cone, it must be two centimeters larger than the base of the cone. It is necessary to retreat the required centimeters on the paper where the circle is drawn with a compass and draw another circle.

Next, you need to cut out the resulting circle, which is two centimeters larger than the original one. Using scissors, cut from the base of the large circle to the base of the other. The distance between such grooves should be five millimeters. Next you need to lift up the cut paper. You need to grease the cut edge with glue and glue it to the base of the cone. Now your cone with bottom is completely made, and you can decorate your New Year's beauty.

Such a Christmas tree will please both you and others, since it is in no way inferior to an ordinary one. Making such a design for a Christmas tree will not take much time, but you will get a lot positive emotions. Since it is possible to translate your ideas into reality, using your imagination to the maximum.

Don't forget to involve your children in making the New Year's tree. This event will not only unite you, but the children will also be glad that they had a hand in creating such a Christmas tree. Let them choose their own decor for the tree. And you will see what abilities kids have.
Making a cone for a Christmas tree is very creative process, using all the rules described, and in this article, any person, whether an adult or a child, will cope with this function.