Open your backpack. Convenient do-it-yourself backpack-bag: a master class with a photo

The backpack is comfortable and universal thing which is suitable for children and adults. Shops offer all kinds of models. But it happens that none of them like it. In this case, the backpack can be sewn independently. The most simple pattern backpack made of jeans is built from the cut of the pants. Seams on old jeans do not need to be ripped. Enough to separate lower part from the top.

We sew a simple children's backpack with our own hands according to patterns

For beginner seamstresses, we offer a small master class on sewing a children's backpack.

The pattern is two equal rectangles. The top will be tied with a drawstring. This bag is suitable for both boys and girls.

Necessary materials:

2 fabric rectangles, 28 x 35 cm.
4 pieces of interlining 5x5 cm.
Lace - 2 m.
Metal blocks or eyelets, tongs, threads.

Glue the fleece on bottom corners rectangles. We process the sections with an overlock or a zigzag seam.

We fold the parts with the front sides, fasten with a needle and mark an indent along the upper edge of 5 cm. We sew the parts along the long sides and one short one to the indent line.

Iron the side seams.

We make a drawstring by tucking upper edge 2.5 cm, and iron.

We sew it at a distance of two cm from the edge.

We mark the places for the eyelets and make holes.

From the wrong side we put the washer, from the front - the grommet with the bulge up, we clamp it.

We thread the cord into the hole and pin a pin to it. We thread the cord into the drawstring from left to right.

Now we pass it through the second hole, and send it to the drawstring on the second side. We hide the ends of the cord.

Ready backpack.

You can sew a backpack of this model from any fabric you like. Optionally, it can be supplemented with pockets. If we sew a backpack for a girl, then it can be decorated with beads, appliqués, ribbons, etc.

Trying to make a roomy backpack out of leather and denim

Denim and leather backpacks will always be in fashion. Therefore, we offer patterns of a women's backpack from these materials.

The photo shows a leather model.

Necessary materials:

Soft skin.
Lining fabric.
Buckle, zipper, 10 metal scallops.
Belt tape.

We cut out leather details shown in fig. 2. From fabric - the main part of the product and the bottom.

We glue and sew a zipper to two leather strips, as in fig. 3. It is designed for the pocket. We attach one strip to it, and the second to the backpack, after inserting the buckle, as shown in fig. 4. We connect the sides of the main part.

We sew the cover by inserting the strap. Leave a hole to turn out. After that, on the front side, we make another line at a distance of 1 cm from the edge, and sew the cover to the back of the main fabric (Fig. 5).

We glue the handles, and sew a 5x10 cm leather rectangle over the place where they are attached. Then we sew a leather strip along the bottom of the backpack, as in Figure 6. We sew the bottom to it.

Sew the lining pieces together, leaving a small opening. We fold the part of the backpack and the lining with the front sides and sew along the top edge. After we turn it out, we sew up the hole.

We straighten the seam and sew, stepping back from the edge by 1 cm. Insert the scallops, pass the cord through them, as in fig. 7.

The leather backpack is ready.

The most common way to sew a backpack from jeans is to take them upper part. We insert a belt into the loops, and sew the bottom. The result is a tote bag.

We make the second version of the satchel from flared trousers. We insert the legs one into the other and get a double bag. The bottom can be made both wide and narrow, at your discretion. We process the upper part to secure the fasteners and straps. We sew the latter together in the upper part, and we part them in the lower part different sides, and sew on the seam of the bottom.

Here are more patterns for a denim backpack.

You can sew a backpack for fishing and hiking with your own hands. For this you need:

Waterproof fabric (nylon, polyester, cordura).
Lining fabric.
Accessories (carbines, Velcro, zippers, buckles).
Nylon threads.

First you need to make a pattern. For a pattern drawing, it is better to take tracing paper or graph paper.

The pattern of a regular hiking backpack includes the details:

Back.
Front end.
Sidewalls.
External pockets.
Webbing.

When the pattern is ready, we sew the details according to it, while adding the necessary equipment.

A few tips for equipping a hiking backpack:

Fasteners for the necessary things are well placed on wide belts stitched vertically along the product.
To make the backpack comfortable to wear on the back, we cover its back with a ventilated fabric and sew in a dense foam.
Fasteners are better to choose from metal or plastic. Zippers are made of plastic, because they stick less.
You can strengthen the straps with the help of modular fasteners.

Examples of patterns for a hiking backpack:

A selection of videos on the topic of the article

Sewing a bag with your own hands is easy. In just a few hours, you can create a fashion accessory that is comfortable and beautiful.

How many bags should be in the wardrobe? Men will answer this question unambiguously: one or two. Women will think, and will not be able to say the exact figure.

A capacious bag, a clutch bag, a summer bag made of cotton fabric, a travel bag, a backpack, a purse bag for walking, an expensive bag of a famous designer. The list is endless.

Tip: buy these fashionable accessories every new season expensive, but the products can be sewn independently. Spend a little time making a masterpiece, and your collection will be replenished with unique and stylish handbags.

Women's bag should be not only beautiful, but also roomy and comfortable. After all, it should fit a lot of different little things, ranging from cosmetics, and ending with a comb, money, some documents, notebook, handkerchiefs and napkins.

original bags do-it-yourself ideas:

1.Stylish cat bag of two models

2. Felt bag - easy to sew, comfortable to wear

Original bags with your own hands - without sewing

3. Bright bag of patchwork zippers

4. Beautiful bag made of scrap leather different colors

Original DIY bags - interesting ideas

5. Summer bags - new every day

Original bags with your own hands - comfortable and stylish

6. Clutches "Cute animals" made of felt

Original DIY bags - cute clutch

7. Shopping Bag from gray felt with an interesting ornament

Original DIY bags - an interesting ornament

8. Bag or sculpture? Beautiful and original

9. fashion bag burlap

10. Beautiful and unusual bag from cotton fabric

All these bags can be sewn at home by yourself. A little imagination, the ability to sew and embroider, and stylish accessory ready.

Important: And it is not necessary to buy fabric and various elements to decorate the product - all this can be found at home.

Any bag usually consists of a front and back parts, a bottom, two side parts and handles.

Important: To sew original accessory with your own hands, you only need to transfer the pattern to the fabric and sew all the details on a sewing machine.

How to sew travel bag with your own hands? Patterns:

You can make such a bag so that the bottom and side parts consist of one piece. less manipulation with sewing machine, the accessory will be ready sooner.

Three patterns different bags: lady's on the road made of cotton fabric, roomy for travel and with strings for safe storage of contents.

How to sew a travel bag with your own hands - three models

Tip: You can take measurements from your old or favorite bag, transfer them to the fabric, and sew on a new accessory.

How to sew a travel bag with your own hands - a pattern for an old bag

Pattern of another capacious bag.

Tip: Choose a pattern of your favorite bag for the road, sew an accessory and go on a trip. This will help you save money and spend it on the trip itself, and not on the purchase of items on the road list.

Do you want to be the owner of a unique and inimitable bag in which you can put everything you need to go to the beach? Sew it yourself - you get a stylish and spectacular accessory.

How to sew beach bag? Detailed master classes in the videos step by step instructions on tailoring and just patterns, can be found in the article about creating from different materials. Fantasize, sew with your own hands and always be fashionable!

What to do if a woman wants to please herself with a new thing? Run to the store new bag? No, sew a small shoulder bag with your own hands.

The scheme of this accessory is simple: two parts - front and back, a handle and a mount for it, a decorative belt.

Cut out the details of the bag from any suitable fabric(leather, leatherette and any other thick fabric) without seam allowances
Sew the handle, and while sewing the front and back pieces, insert the handle
Decorate the bag with a decorative strap or other trim
As a fastener, you can use a hidden magnetic button. For such a bag, it will be appropriate

You can sew a bag over the shoulder of the original cut according to the following pattern. This bag looks feminine and original.

The video shows how to quickly and easily sew a shoulder bag in just 1 hour.

Video: shoulder bag.flv

Leather is a durable material. Wardrobe items from it are spectacular and beautiful.

If the house has an old Leather Jacket, then you can sew a bag. If there are two jackets and they are of different colors, then you can combine the material for sewing or make leather trim in a bright color.

Sewing a leather bag with your own hands begins with a pattern. It can be done first on paper, and then transferred to fabric, or immediately cut out all the details from the skin.

Sewing a leather bag with your own hands - pattern

Cut out all the details according to the dimensions indicated in the diagram, leaving no allowances for the seams
Customize sewing machine on sewing leather and get to work
First sew the bottom to the two main pieces
Then sew them, and process the top of the bag with a stitch and a large zigzag
Sew on the handles and the bag is ready

Here is another pattern of soft leather bag which can be sewn in 2-3 hours. It will be comfortable to carry in the hands and on the shoulder.

Sewing a leather bag with your own hands - a gray leather bag

The trend of the season is a bag made of fur. The designer shows how you can sew such a bag with leather inserts.

Video: Predatory bag

Recently, burlap bags from famous designers have appeared on the world catwalks. At first, the ladies reacted to such an idea with incomprehension, but a burlap bag quickly gained popularity.

In order not to spend a lot of money on the purchase of the original, you can sew such an accessory yourself.

Wash and iron old bag, from which the main details will be cut out
Find an old unwanted diary or book, peel off the cover. She will keep the shape of the future bag
Attach the cover to the burlap and sew 2 pieces plus 7mm on the seams on all sides
Tailor such details, only without seam allowances from any lining fabric
Sew the lining, leaving only one side unsewn.
Slip the resulting lining fabric bag over the cover. Sew up the one side that was left unsewn.
TO leather handles sew fasteners from burlap
Using a glue gun, glue the handles with the stitched fasteners to the outside of the cover sewn into the pouch. Sew them with a needle and thread so that the handles hold tight
Now sew the main vertical seams of the burlap pieces
Decorate your bag with cut out letters, words and numbers or original prints
Baste all bag cuts
Put the burlap on the cover in the lining and glue all the joints of these parts. It turned out a beautiful and stylish bag

In the video, the designer shows what else you can sew a burlap bag. With such an accessory it will be pleasant to walk around the city or go on vacation.

Video: Smart bag with your own hands!

A woman cannot go out without a bag, as she needs to take a lot of different little things with her. But it often happens that you need to leave your hands free, so a backpack bag is useful.

Such an accessory can be sewn independently from fabric cuts that are in the house or from an old one. outerwear. How to sew a backpack bag?

Follow these steps:

Cut out the details of the backpack: the outer part (2 pieces), 3 harness handles, handle design, bottom and bottom of the sidewall, lining - 1 piece
First sew the handles of the harness. If a long zipper is sewn to the handles, then it will be possible to wear the product both as a backpack and as a bag
Now sew the bottom of the backpack - dock all the details. You need to sew “frames” to the bottom, into which handles will then be inserted
Sew pockets inside and out to lining fabric
Gather the outside of the bag by sewing in the handles of the harness
Sew on the bottom of the lining fabric and connect the top to the bottom
Insert the zipper and decorate the top of the handles

It turned out a beautiful and comfortable backpack-transformer. It will fit everything you need for a woman.

Denim bags, photo

It is not so difficult to sew a bag from old jeans or a jacket. Every woman can do this. The result is a stylish accessory with which you can go to the store, for a walk or to the beach. Clutch bags from denim, photo

Men also love new clothes, especially if scuffs have begun to appear on their favorite things. How to sew men's bag? This question is often asked by needlewomen if they want to please their soul mates with a new stylish accessory.

Sewing such a men's tablet bag is not difficult. First make a pattern on paper.

How to sew a men's bag? Pattern

Now take these steps:

Transfer the pattern from paper to fabric
Cut the lining according to the largest detail
Sew the details of the lining fabric
Sew the main part of the fabric on three sides and sew on the lining
Sew the handle if it is made from the same fabric as the bag. If the handle is made of a special inlay, then just sew it to the main part of the almost finished bag.
Sew on the zipper - the bag is ready

You can decorate the product in different ways. For example, make a folding piece in two parts, as in the photo, or insert a zipper with interesting sliders. It all depends on your imagination and desire.

Video: "Handmade" DIY bag (03/20/2013)

The modern market offers fishermen and hunters a huge selection of various ammunition. Buy necessary labor won't make up. All the more surprising for someone may be information on how to sew a backpack with your own hands, which is posted on the network in many ways.

Indeed, the times of total shortages have sunk into oblivion, and consumers now, it seems, do not have an urgent need for needlework. But this is only at first glance. Upon closer inspection, it may turn out that sewing a backpack for fishing with your own hands means purchasing ammunition that fully meets the needs of a particular fisherman. At the same time, such an ideal accessory will cost him much less than the same, but ready-made. In today's conditions, this is very relevant. The money saved can be spent on the purchase of other devices necessary for fishing. You will find out which ones by visiting this page: http://www.ohotniki.ru/equipment/backpacs/. Go to the indicated address, and you will receive information about what is especially necessary for fishing.

Now we will do something else - the search for an answer to the question posed in the title of this article.

What will we need?

First of all, you should be puzzled by the purchase of fabric. Not everyone is suitable for tailoring a tourist backpack. Avisent and kondura proved to be the best in this sense.

One caveat - avizent is produced on the basis of natural fabrics and nylon. The first one doesn't work for us. Only nylon fabric can and should be used for tailoring a backpack. The advantage of this material is its lightness (in contrast to the previously used tarpaulin, which weighed decently even when dry, but as soon as it got wet, the burden became completely unbearable), it is not afraid of wind and is sufficiently resistant to moisture. Of course, the avizent will not withstand heavy rain, but light rain will do.

If moisture-resistant characteristics are decisive for you in a backpack, we recommend using a kondura with water-repellent impregnation and polyurethane coating. This nylon fabric is not very cheap, but its price is more than justified. Did you know that the kondura was originally intended for the army? Agree, this fact speaks volumes. The advantages of kondura include its high resistance to abrasion - backpacks based on it will serve for a long time.

Little advice. If you are not confident in your seamstress skills, you should not immediately start working with expensive material. Try sewing a pattern using old items: jeans, raincoats, etc.

In addition to the main fabric, we also need an additional one. Bologna or parachute silk acts as such.

In addition, you can also purchase a foam travel mat (izolon).

How much fabric do you need?

For sewing a backpack of the main fabric (avisent or kondura), at least 3 sq.m. It all depends on the pattern you choose (more on that below).

Bologna or parachute silk is required three times less - 1 sq.m.

Isolon needs 1 sq.m. The thickness of this material is also important, which should not be less than 1 cm.

Accessories

In addition to materials, you need to purchase a large number of various accessories.

First of all, the slings are wide and narrow. First, we need 2 meters with a width of 45 mm, the second - 7 m with a width of 25 mm.

In addition, in sewing supplies stores, buy snap-in buckles (2 pieces) and tightening ones (14 pieces).

Twenty-centimeter zippers should be bought in an amount equal to the number of pockets. You also need 1 zipper 30 cm long.

In order for the backpack to keep its shape, you need to sew a frame into it. It is usually based on an aluminum tube. Length - 70 cm, diameter 4 mm. We need 2 such metal "sticks". Do not forget also about the rope (diameter 3 mm, length - 1.30 m).

The last thing you should buy is a centimeter braid (length - 2m) for finishing the seams.

Pattern

On the net you can find a huge number of the most different patterns, and not all of them are simple and understandable. But for a beginner "seamstress" complex designs may not be suitable. Therefore, today we will describe one of the simplest and most affordable ...

So, first we cut the body of the backpack. It has a trapezoidal shape with dimensions of 75 × 80x75 × 85 cm. Please note 75 cm is the height here, and 80 and 85 are two lengths. Dimensions do not include seam allowances. They are usually 1-2 cm. Immediately on this piece of chalk dotted line mark the places for sewing pockets. On such a backpack they can fit up to 3 pieces. But you can do one - it all depends on your needs.

One pocket in any case should be. Its dimensions are 25 × 25 cm (excluding seam allowances). If you want to have more than one pocket, then the other two are 25x15 cm. Sew zippers into them immediately.

Now cut out the back of the backpack. This is a long rectangle with a height of 75 cm and a width of 30 cm. Separately, you can cut out the bottom measuring 36 by 33 cm. But it is better to cut it out together with the back - then you will be able to reduce the number of seams. Immediately make tunnels for the tubes. To do this, two slings 2.5-4 cm wide are sewn to the back from top to bottom. They are not sewn tightly - so that the tubes can then be inserted. The lines should end just above the beginning of the bottom. Sew tightening buckles from above at the corners, two more should be sewn on the sides of the back at an equal distance from each other approximately in the center. Also find a place for a pen and make it from a narrow sling. It is recommended to place the handle not at the top of the back, but a little lower - at a distance of about 2.5 cm from the top edge.

Now let's start cutting the straps. This is where we need a dense and thin nylon and a tourist rug. We cut the straps from all three parts of the same shape (it is supposed to be a layer cake). Two pieces each. The length of the straps is 65 cm. The width is 3 cm.

How it's done: pieces of thin and thick nylon are sewn together, but not sewn along the bottom. Then they are turned inside out, an isolon part is inserted into the formed pocket, and now everything can be stitched. In the same way, we make a belt 75 cm long, 20 cm high. From above, it is reinforced with a wide sling. 2 slings 40 cm long and 2.5 cm wide are also attached to the edge. Tightening buckles are attached to the top at the place where they join the backpack.

What were the slings for?

They are needed to strengthen the straps. Take a narrow sling (25 mm) and attach it to the straps in several places (across). At the same time, a tightening buckle should be strengthened at the place of its end. Important nuance- the slings are sewn to the side of the strap, which is made of dense nylon.

We sew the shoulder straps to the back - over the handle. The specific distance is calculated depending on your height. For person up to 180 cm distance from bottom edge of the backpack to the beginning of the straps is 50 cm. For taller subjects - 55 cm. If your height is less than 170 cm - the straps are sewn lower - at a distance of 45 cm from the bottom edge of the backpack.

To prevent the backpack from rubbing your back, make a special “cushion”. To do this, we need the same tourist rug and soft nylon to protect it. Open out of them two identical parts in the form hourglass. At the narrowest point, the distance should be 15 cm. The width at the top is 20 cm, at the bottom 25. The height is 50 cm. Moreover, 20 cm is the height to the point of narrowing and 30 is everything else. Now we sew these details together and sew them on the back over the straps. But there is a trick here. At the bottom of our watch we leave a gap for the belt. The gap just forces those very 20 cm that remained to the point of narrowing.

Do-it-yourself exclusive: original backpacks from old jeans.

Each of us has a few pairs of old jeans that have fallen into disrepair - worn, torn, small or out of fashion. You won’t go to work and visit in such ones, and it’s inconvenient to work in the garden or around the house in them, but for some reason it’s a pity to throw them away ... There are great idea- You can make a lot of useful things out of old jeans, for example, a stylish and comfortable backpack!

Adult Options

We will try to choose the easiest options to perform, which even a beginner will be able to do. sewing business. Take old jeans and tailor's scissors, and we will detail all the other subtleties in the instructions.

Old jeans and sharp tailor's scissors are what you need to get started.

Backpack "Old patches"

The hostess, who is keen on needlework, in addition to old jeans, has enough scraps of other fabrics that accumulate and accumulate, and all her hands do not reach to throw them away. Here on such a backpack they can be applied.

Backpack ‘Old patches’

You will need:

old ripped jeans;
edge trimming of fabric of any colors and textures;
button;
cord;
interlining;
6 pieces of eyelets;
metal rings for harnesses - 2 pcs;
matching sewing threads;
sewing needles;
sewing machine.

So, for the initial dimensions for the pattern, we will take the following:

rectangle 73 X 37 cm for a backpack;
oval bottom 27 X 16 cm;
straps 100 cm long and 10 cm wide (5 cm in ready-made) - 2 pcs.;
valve.

Scheme-pattern of a backpack

This is such a fun backpack that both adults and teenagers will be delighted with!

Simple, beautiful and roomy backpack

This backpack is so simple that you don't need a pattern to make it. It is made in the form of a simple "bag", and only a few steps need to be told in more detail.

You will need:

old jeans;
interlining;
lining fabric;
lace;
belt tape.

A simple backpack

If there are many pockets on the jeans that are used for such a backpack, then they can be used as decoration and at the same time - places for various little things.

Children's option

For children of any age, it is important that their things are bright and talk about the hobbies of their little owners. Backpack - simple necessary accessory for the child: it is convenient, roomy, mobile. And old jeans are the best way to apply all your imagination and sew such an attribute to your tomboy or little princess.

Cheerful funny backpack for a child

For such a cute backpack you will need:

old jeans, preferably 2 colors;
interlining on an adhesive basis;
plastic;
lining fabric;
sewing accessories.

Please note: the pattern of such a backpack is made from jeans of the same color, a different color will be needed for decoration.

The following details will be required:

oval bottom 13×22 cm;
two rectangles of 25 × 32 cm each;
pocket cut 15 × 15 cm from jeans of a different color;
two parts for straps 60 × 10 cm;
pattern for a pen;
valve cut.

All details must be overlaid so that the edges do not fray later. If you want the product to have a fashionable terry edging, you can do without processing the edges.

Sewing parts is better to start with a handle and straps. They are sewn from the inside along, after which they are turned out and ironed.
A pocket is sewn to one of the two parts of the main part of the backpack. To keep it secure, reinforce it with double stitching.
The plastic bottom is glued to the interlining and attached to an oval pattern. The bottom and walls are sewn together, all the details are stitched.
The final touch - the straps and the handle are sewn on. The inside is lined.

That's all, this is the end of the work on the backpack.

roomy model

This backpack is perfect active child who frequents sport sections. It is large enough to fold your gym clothes and other little things, but at the same time it is light and does not look bulky.

Sports backpack from old jeans

For this backpack you will need:

the legs of old jeans in two colors (for example, the sides are light, the front and back are dark);
skin for the bottom:
finishing fabric, for example, satin;
clothesline for sealing the edging;
belt fabric for straps;
plastic fasteners for bags and regulators for straps;
decal or patch with your favorite cartoon character.

Prepared parts and materials

Decorating Ideas

Denim is a great versatile material. A backpack made of such a fabric is original in itself, and if it is sewn from old jeans, on which there are pockets, labels, and other trim, then we can safely say: this is an exclusive.

But sometimes you really want to give free rein to your imagination and decorate such a new thing to suit your mood! And this desire is inherent in any age: children, teenagers, and adults.

The backpack can be decorated with flowers, terry, bright cords and small mirrors or rhinestones. Great option for a teenage girl or young woman.

And even put toys or coloring books there, read our material.

If you are at home, then he will probably soon want to carry an adult with him and, like older children. But if there is still a year or two left before school, now you can make a small backpack-bag for him. For younger students, such a bag-backpack will also be indispensable. It can be sewn standard size or a little smaller to wear a separate change or uniform for sports or dancing.

A personalized felt letter on the backpack will help the baby, firstly, quickly find his backpack, and secondly -. If you intend for a uniform, instead of a letter, you can sew on an image of shoes, equipment, or the name of a circle / section.

To sew a backpack bag with your own hands, you will need:

Sewing machine
Threads to match the fabric
2 pieces of fabric measuring 30x35 cm
Thermal adhesive tape
pins
Felt for a letter or image
2 laces 150 cm long
Safety pin
Scissors

How to sew a do-it-yourself lace-up backpack: a step-by-step master class with a photo

Step 1: Attach the hot-melt tape to a piece of felt cloth. Print out the letter you want to display on your backpack bag and attach it to the heat-sensitive tape. Cut out a letter from felt.

Step 2: Take two prepared pieces of fabric for a bag-bag or cut from a larger piece of material (dimensions 30x35).

Step 3: Remove a sheet of paper from the felt letter and glue it with an iron on the front side of one of the pieces of fabric.

Step 4: After you have gone over the letter with an iron, carefully sew it contrasting thread. Make the stitches long, but neat, because the letter on the backpack-bag will attract attention in the first place.

Step 5: Smooth out the front side of the future backpack on three sides about a centimeter from the edge, and leave the fourth side unfinished. Sweep the three smoothed sides.

Step 6: Do the same with inside backpack - that is, with a second piece of fabric set aside by you for sewing a bag backpack.

Step 7: On both pieces of fabric, indent from the unsmoothed edge by 6-7 centimeters and mark it with a pen. Bend literally 1 centimeter first, and then stretch the remaining 5 to attach to the mark.

Step 8: Sweep the edge (1 cm) and sew exactly along the marked line to get a "loophole" for the lace of your future backpack-bag.

Step 9: Do the same with the second piece of fabric. A string will slide along the “tunnel” and tighten the backpack-bag for the child.

Step 10: Now fold the pieces of fabric right sides inward, lining up the top edge where the string will go, and secure with a safety pin. Sew the sides of the bag, making a small seam - starting from one end of the drawstring eyelet and ending under the second.

Step 11: Turn the backpack inside out and iron it. You just have to pull the drawstring into the backpack-bag, which will tighten it!

Step 12: Using a pin, hooking it on one of the laces, pass the entire lace, starting with front side fabrics with the letter c right side. When you are done, both ends of the lace should remain on the right side - that is, the lace comes out already from the second part of the backpack, but also on the right side.

Step 13: So, both ends of the lace hang on the right side of the backpack. Line them up and tie them in a knot at the bottom.

Step 14: Repeat step 12 with the second lace, but starting on the other side. Both ends of the lace should now remain on the left side. You are almost done sewing your DIY backpack bag!

Step 15: Turn the backpack inside out again and move a couple of stitches at the bottom of the backpack, at the corners. Pass the tied ends of the lace between the stitches and bring them out at the corners of the same side on which they hung.

Step 16: Stitch the "break in" diagonally a few times to keep the knots in place.

Step 17: Turn the backpack inside out again, this time front side outward, and spread the laces on the sides so that they are taut as they should be. Backpack bag is ready!

Now the child will be happy to carry his own toys, food, uniforms or shoes in a new backpack, because you made such a wonderful do-it-yourself backpack bag especially for him. Yes, and you will enjoy it. And who knows, maybe you can finally afford to carry a smaller bag so you don't carry tons of baby food and clothes around with you.