How to make a stone arch. Finishing the arch with stone: we make the interior opening spectacular

Decorative stone is today one of the most suitable materials for finishing surfaces both inside and outside buildings. This material is quite easy to process, it can not only be drilled, but also cut. But to get good result should be guided by the technology of installation work, it will be presented below. You can use decorative stone for interior decoration, as one of the elements of which is the arch.

Instrument preparation

Decorative stone begins with the preparation of tools, among which are:

• construction mixer;
• cutting machine;
• a bucket for mixing the adhesive solution;
• paint brushes;
• trowel;
• grout syringe;
• wedges of the same thickness.

Among other things, you will need a building level and a spatula. It is important to take care of the presence of a metal brush and with the help of the latter you will be able to adjust the elements on the surface after laying. To measure and cut the material, you will need a construction tape measure. In the process of work, you can not do without a household spray gun. Wedges can be made of wood and plastic, they will allow the formation of seams. You can replace the cutting machine with a cutting machine.

Preparation of materials

Decorative stone is carried out after the preparation of all the necessary consumables, among them should be highlighted:

• glue;
• primer;
• grout;
• water repellent.

When choosing a glue, you need to pay attention to its purpose. Available for certain finishes different varieties adhesive compositions, they are usually designed to hold the calculated weight of the material. Therefore, first you need to choose finishing materials, and only then proceed to the purchase of glue. If the work is to be carried out with low temperatures, then you should take a more serious approach to the choice of adhesive composition, it must have the appropriate properties.

Surface preparation

stone finish in without fail involves the preparation of the walls. To do this, you need to rid the base of the old whitewash, wallpaper or paint. The master will have to level using putty. The surface of the arch must be primed, this composition will fasten small particles together, so any finish will be held as tightly as possible.

On sale you can find primers for any surface. If you have to work with a concrete wall, then you should treat it with Betonkontakt primer. When the conditions in the room are different high humidity or temperature, the back side of the decorative stone must be moistened before laying.

Arches decorative stone is carried out using a slightly different technology, if we are talking about drywall construction. To prepare for such work, you need a light stone. It is necessary to carry out such manipulations exclusively indoors. If the arch from the GKL is on outdoors or under a canopy, then it is impossible to decorate it with a stone.

The surface of the drywall is treated with a primer, which should be left until it dries, only after that you can proceed with the installation of products. The primer is applied with a roller, and not only the outer, but also the inner surfaces are treated with the composition.

Preparing the stone for laying

If you will be finishing arches with decorative stone (photos of design options are presented in the review for reference), for starters, it is recommended to mix all products from different packages first. At the next stage, the stone must be laid out on the floor. Position individual elements is chosen in such a way that the texture looks the most advantageous. For example, you can distribute elements by shade or shape, as well as size.

Rules for applying glue

Before starting work, you must read the instructions and dilute the glue in the bucket according to it.

The composition is mixed with a construction mixer until a homogeneous mass is obtained. Using a spatula, the mixture is applied to the wall only in the place where the product is supposed to be installed. WITH reverse side the stone must also be treated with glue, which is applied with a spatula. The layer thickness should not seem more than 1 cm. If this parameter is exceeded, the product will slide down the wall.

The adhesive is applied to the entire surface of the stone, while avoiding voids that can cause condensation inside the masonry during operation. This recommendation also applies to walls, on their surface the adhesive should be applied in a uniform layer.

The method of installation of decorative stone

When finishing the arch with a decorative stone in the apartment, you must follow certain instructions. The stone is applied to the place treated with glue and pressed against the surface. In this case, it is important to use the building level, and with the help of a mallet, the products are aligned vertically. The stone can be moved from side to side to achieve its snug fit to the surface.

In order to check how good the masonry is, during installation it is necessary to tap the products with a screwdriver handle. This will allow you to understand whether voids have formed inside. If there are any, then the stone is removed, cleaned of glue, and the work is repeated anew. When finishing the arch with a decorative stone in the apartment, you should definitely consider the photo. They will allow you to understand which material is better to prefer. As soon as the finish is on the wall, you need to gently tap on its surface, the adhesive that has come out is removed with a spatula. If the mixture appears on the ends, it is not necessary to remove it, it will improve the quality of adhesion of the material to the wall. Work can be carried out using one of two technologies:

• without seams;
• with stitching.

Laying stone with seams

When finishing the arch with a decorative stone with your own hands, you can form seams between the products. Their grouting is carried out using a syringe filled with grout. The solution must be applied in such a way that it extends 4 mm from the outer edge of the product. This will form a clearly defined relief. To obtain a smooth texture, it is necessary to fill the seam at the same level with the front surface of the stone. 30 minutes after applying the grout, it is necessary to smooth the seams with a special spatula or spatula. When choosing a grout, you should be aware that the compounds can mimic the color and texture of a real grout. The grout may have a different color.

Chip treatment

When is the finishing door arch decorative stone, it may be necessary to process chips. The stone is cut to size, but if its edge remains even at the junction, then the wall will not look natural. You can perform a chip by outlining its outlines with a knife. At the next stage, the excess part is bitten off with pliers. You don’t need to bite off the products along the edge of the mark, you need to start with small pieces, otherwise the product may break in the wrong place. You can correct errors with a file, with its help you will give the chip smoothness. Additionally, the surface is treated with sandpaper. However, sometimes the chips do not smooth out.

Final decoration

Finishing interior arch decorative stone can be completed by applying varnish or tinting mixture. The latter allows you to hide defects and cracks that have formed in the process. To apply the composition, it is better to use an airbrush, however, some masters manage with paint brushes. The airbrush allows you to apply the mixture from a long distance, while holding the tool at an angle to the surface to be painted. You should not cover the entire area completely, it will be enough to tint the main protrusions and depressions, this will help to get a deep texture.

An interesting effect can be achieved if bronze or gold coloring pigments are used as the basis for the mixture. In this case, it is necessary to tint only the ends of the tiles. Metal with this finishing technique is not striking, but with a certain illumination of the ends, the masonry begins to play with golden highlights.

Conclusion

The arch is a rather small element of the interior, but its decoration sometimes takes several days. However, you should find time and effort for this work, because decorating this part of the room will allow you to decorate the house, making it more comfortable, and the interior more refined.

The arch is a real decoration of any room, its smooth forms bring softness and special comfort to design solutions. Very important point in the device of this element is the finish, since it is she who determines the style and showiness of the arched passage. decorative design should match the overall style of the room, but at the same time, it can become the center of visual attraction for the entire interior.

It should be noted that arches are arranged not only in wall openings, but also as decoration for niches or windows.

Finishing the archway with artificial stone

IN Lately the design of these arched structures became especially popular artificial stone.

1. Material selection

Currently on the market there are a large assortment this material. A variety of colors and textures allows you to choose the material for any interior and taste. Among the most popular stone imitations are shell rock, slate, granite, travertine, marble, etc. The texture of the tile can be smooth and refined, or it can resemble a wild rough stone.

Tiles are produced in the form of flat plates different sizes and thickness, as well as the corner version of the product, which allows you to arrange all the corner parts of the arch without problems and with all accuracy. But it must be purchased after careful miscalculations of all sizes and quantities of material.

In addition to being the most spectacular view finishing, it can be called the most difficult. In order for the artificial stone to hold well, you need to choose it correctly. The choice should depend not only on appearance products, but also on what surface it will be glued to.

Facing stone is made on different bases. For the arch, you need to choose options made from lightweight materials, such as acrylic or quartzite, but in some cases gypsum, alabaster or sand-cement mortar tiles are also suitable.

1. For example, if the arch has a structure sheathed with drywall, a lightweight and flexible acrylic tile is best for it, but the gypsum option is also quite applicable.
2. Made of brick and plastered, the arch can be decorated with an imitation of stone made from a cement-sand mortar.

Advice: Better adhesion can be achieved if the tile contains the same material that is on the surface on which it will be laid.

Attention! Some craftsmen make tiles that imitate natural stone at home. Now forms and material for its manufacture can be purchased at hardware stores.

When an artificial stone is selected, you need to carefully prepare the surface for future masonry.

2. Surface preparation and adhesive selection

1. So that the work goes without delay, and the tiles stick well, the surface is leveled and treated with a primer. Then they dry well and only after that they start working.
2. The choice of glue depends entirely on the material from which the artificial stone is made.

• Acrylic and quartzite tiles give good adhesion to drywall surfaces when glued to so-called "liquid nails".
• The gypsum or alabaster variant gives good adhesion to drywall and even concrete if a gypsum-based adhesive is used.
• Cement-sand products can be glued to concrete mortar or special cement-based adhesive.
• In addition, you will need a special mixture for sealing joints between tiles. The suture procedure is carried out after full completion work.

3. stone masonry

When finishing the arch, the problem of neat masonry lies in two zones - these are the corners and the arc of the structure. Remember, any tile starts to stick from the bottom row.

corners

So that wide seams do not form at the corners, and they look perfect, you can use two methods of working:

• the first of these is acceptable for rigid tiles made of gypsum, alabaster or concrete. At the combined corners of the tile, cuts are made along its thickness at 45 °, which will neatly lie against each other, and the seam at the corner will be minimal;
• the second way of laying the corner is that the tiles are glued with an overlap, i.e. in the first row, on one side of the corner, it is aligned with the corner and glued exactly along it, and on the other hand, with a protrusion exactly the thickness of the previously laid tile.
• It turns out such a masonry design: in each even row, a tile is pulled out on the left side of the corner, in each odd row, on the right. The length of the tile should be adjusted to the total in the vertical row.

vault arch

It should be noted right away that it is best to finish the vaulted part of the arch inside with acrylic flexible tiles. Using it, you will not encounter difficulties in your work. Acrylic adheres well to the surface and takes the form of a semicircle, and can also be easily adjusted in length and width.

If it is decided to finish with an inflexible material having a certain thickness, then you need to choose a narrow tile and arm yourself with some tools.

1. First, the tile is tried on the plane of the arch, in the place where it will be glued, and its length is marked.
2. The marked line is drawn several times with a construction knife, after which the marked part is broken off with the help of pliers. Edge roughness is smoothed out with a file. If the tile is made of gypsum, it can be cut off with a regular hacksaw.

3. Sealing

Approximately 18-20 hours after the completion of the masonry work, you can start sealing the joints.

This process requires the utmost care, since by staining the tile with a solution, you can ruin all the work.

The seams are filled with a rubber spatula, the excess composition is immediately removed with a damp soft cloth.

If it is supposed to decorate not only the corners of the arch, but also the wall around it with artificial stone, this is done after completing work with the main structure.

Arch finishing examples

Everyone chooses the interior decoration to their taste, but if you decide to use a stone for this, which will decorate the arch, it’s good to look at already ready-made options. Perhaps someone will find among them suitable for themselves.

Acrylic tiles imitating natural stone were used in this interior.. It is unusually and interestingly arranged around a spectacular arch. invoice and color solution in harmony with the overall design of the room. The shade of the plastered walls and door panels is perfectly matched. A fairly thin wall in which the structure is arranged would hardly allow the use of tiles made of heavy materials - they would look rough and out of place. The acrylic version gives subtlety and elegance to the design.

Wide arch trimmed plaster tiles under wild stone, organically echoes the chimney masonry and is, as it were, its continuation. In this option, a small narrow tile is used, which will facilitate its laying. The work will take more time, but it will save you from unnecessary adjustments to the material. The arch fits perfectly into the interior both in form and in color scheme. The design is in its place, creating the overall harmony of the room.

In the design of the arch and fireplace, a heavy version of imitation of artificial stone was used. made from cement-sand mortar. It has a certain thickness, but does not look rough and defiant. The rounded edges of the tiles give the masonry a special charm and elegance. It should be noted that such tiles are made independently or to order, as they have an individual shape for a specific arch design. In some places of the vault, corner tiles are used, which make the corners neat and beautiful. In support of the arched opening, the fireplace, niche and decorative element on the wall. The interior imitates a room medieval castle but more comfortable and modern.

On the example of this arch, you can clearly see how the corner stones for a semicircular arched vault look and are fixed. This is a very convenient element that eliminates the masking of seams at the corners. The arch is decorated with tiles, under a wild stone. Such specimens are made from a cement-sand composition and are attached to a special adhesive, which is based on cement. IN this case, the seams also play the role of a decorative decoration of the opening.

When starting to design a structure with an artificial stone, it is necessary to think through all the nuances of the work. After reviewing the above instructions, you can draw conclusions about whether you can independently equip this element of the interior. If you are completely unfamiliar with such a process, it is better to invite a qualified craftsman who will do everything in the best possible way.

The design of the doorway in the living room or hallway in the form of a large arch has been popular in our country for more than a decade. This gives the interior individuality and a special charm. However, you should not leave the arch without additional cladding - modern finishing materials can emphasize the beauty of this design element. Today we will tell you how to decorate the arch with a decorative stone.

Finishing two arches at once in one room with a decorative stone in an identical way

Decorative stone for finishing works is a material that has practically no drawbacks. Artificial in itself, it consists of components such as cement, pumice, expanded clay and others that are environmentally friendly. Corrosion, putrefactive processes or fungus cannot occur on decorative stone. In addition, in comparison with natural stone, this material is cheaper and lighter in weight.

A variety of colors, textures and imitations of decorative stone in hardware stores

When decorating arches, artificial stone shows the following advantages:

• Ease of care;

To clean the surface, all you need is water and any non-abrasive detergent.

• Many options for textures and colors;

The production of artificial stone is quite common, and today consumers can choose suitable option for any interior. An excellent imitation of natural analogues in color and texture allows you to create a cladding that is outwardly indistinguishable from natural stone finishes.

• A fairly simple installation of the material;

The process of facing the surface with artificial stone is completely simple, so you can handle it yourself.

• Protection for the corners of the arch.

An artificial stone covering the junction of the wall and the internal opening will perfectly withstand various mechanical damage.

Corners with artificial stone cladding are perfectly protected from mechanical damage

Stages of finishing the arch with artificial stone

If the question is relevant for you - how to finish the arch with a stone, and moreover, if you decide to do the installation yourself, the following recommendations will be useful.

Preparation for work

The preparatory stage of work consists of the choice of material, the acquisition necessary tools and preparation of the arch surface.

1. Choice of decorative stone;

It is worth choosing thin and narrow plates of artificial stone for finishing the arch

Usually the shape of the plates is chosen in the form of thin narrow rectangles, such proportions will look best on the opening. Often the surface of the walls (and arches) is leveled using drywall, which necessitates installation light material, and thin plates are ideal here.

Another plus of this form of stone is that if you arrange the tiles vertically, this will visually increase the height of the arched opening. In addition, in rounded arches, such material is easier to attach.

Small plates of artificial stone are easier to use in the decoration of a semicircular arch

1. Necessary tool for installation;

To finish the arch with a decorative stone, in addition to the material itself, you will need:

• putty;
• primer composition;
• masonry mortar or liquid nails;
• putty knife;
• angle grinder;
• plumb or level;
• pencil;
• sandpaper (or file).

1. Arch surface preparation.

It is necessary that the surface of the arched opening be flat. If this is not the case, then wall defects should be leveled - cracks and grooves should be puttied, bumps should be sanded.

Careful preparation of the surface of the arch before finishing with artificial stone is necessary

In the case of a flat surface, notches are made on it with a small hatchet or similar tool. This will increase the adhesion of the applied materials.

Also, without fail, the entire area on which the stone will be applied must be cleaned of dirt and stains. Then the surface is primed, and you can proceed directly to the installation.

To comply right technology lining the arch with a stone, a surface primer is required

Technology of facing the arch with stone

Depending on the chosen design, the sequence of mounting materials on the surface of the opening may be different. Usually, installation starts from the bottom up from the junction of the opening and the wall.

The first plate is attached to the surface, leveled or plumb and fixed. Then, adjacent plates in a row are fastened in the same way. When the first row is laid out, the installation of the second row begins. Usually, seams are left between the elements - about 4-5 millimeters. To keep them even, you can use special plastic dividers.

The beginning of the installation of artificial stone on the surface of the arch in the direction from the bottom up

It is worth considering that when installing a stone on inner surface the arch element should protrude outward by the size of its thickness. This will allow you to decorate the outer walls with overlapping material and avoid the need to mask the corners.

To accurately cut desired length plates, first it is applied to the wall, and on inside a pencil marks directly along the arc of the arch - this will be the cutting line. Exact size tiles are especially important when installing decorative stone on an arched archway.

Most main question, which worries inexperienced craftsmen - how to properly cut a plate of artificial stone. There are two common ways - using pliers and a hand saw.

In the first case, on the cut line made with a pencil, you need to draw a construction knife several times with pressure. Then everything that is superfluous is simply bitten off with pliers, and the uneven edge of the plate is polished with a file or sandpaper.

After marking, the excess part of the artificial stone is bitten with pliers along the line

With a hand saw, as a rule, already mounted material is cut directly on the surface. This method has its own nuances. Firstly, it is only suitable for plates installed vertically or horizontally and glued to a mortar containing gypsum (in cases where the stone was mounted on cement, a circular saw is used for cutting). Secondly, some experience is required when working with a hand saw - if you spoil the material, then replacing one damaged element will be almost impossible.

The last step in the installation of decorative stone on the arch is the sealing of tile joints. About a day after the completion of the laying of the material, the gaps between the plates are filled with a special solution. To lay the grout in the seams, either a rubber spatula or a construction syringe (gun) is used. To make the seams look neat, they should be smoothed with a brush.

Filling the seams between the plates of artificial stone using a building syringe

Important! Despite the high strength, artificial stone can be damaged during the finishing work. Therefore, do not press too hard on the material or bend it.

If you cannot imagine the result of such a design of an arched opening, we offer you photos of arches, which were finished with decorative stone. We are sure that among them you will definitely find a suitable option for your house or apartment.

Arches in apartments and private houses rarely went out of fashion, most likely, many were stopped by the difficulty of work. Today, finishing materials have appeared that allow it to be produced without any problems, in particular, gypsum boards. Decorative stone is well suited for their cladding, which has many advantages.

Advantages of artificial stone

With its help, any room is immediately transformed, getting a solid and original look. In addition to beauty, artificial stone is a practical material.

Finishing the arch with a decorative stone is not always done on a perfectly flat surface, thereby removing one of the finishing stages.

Facing the arch is one of the ways to add zest to the interior of the room.

What else is interesting about the material:

• unlike the natural analogue, it has a much lower weight, and due to correct form it is much easier to work with him, in addition, and his price is lower;
• the stone does not contain any harmful impurities, as it is created from quite ordinary materials;
• the product does not rot, cannot be spoiled by fungi or mold, bacteria do not create their colonies on it;
• it is not necessary to carry out any special measures for its care, it can be washed and cleaned with any non-abrasive detergents;
• by adding to the main mixture various dyes, you can make exactly the color that is needed in a particular interior. The same applies to the shape of the stones, depending on the pouring forms, where you can make stones like tiles or bricks, antique or modern style.

Valued as a decorative stone, and for their reliability. Therefore, the decoration of arches with decorative stone front door or in the corridor, in places where walls are most likely to get dirty or damaged, has become so popular.

Getting ready for work

The main difficulty in facing the arch is not so much its smooth surface as the rounded inner part. Below will be the installation instructions and the subtleties of the process itself, which will help to make it with minimal effort on your own.

Prepare tools and materials:

• pick;
• pliers;
• roller;
• hacksaw;
• decorative rock;
• primer;
• building level;
• liquid nails or special glue;
• cement-based mortar;
• putty knife;
• construction knife;
• pencil;
• sandpaper;
• seam solution.

Getting ready to install

Before you learn how to finish the arch with a decorative stone, you need to preparatory work to not stop the process at its stages:

1. Choose an artificial stone based on the main surface on which it will be installed. For example, for a drywall arch, a very heavy product can deform or even damage it. Therefore, most often narrow plates are selected for them, since it is easier to fix them to the arcuate inner part.

1. Prepare the surface of the archway. Be sure to carefully review it for various defects. Lay the stone only on a solid and clean surface.

If you decide to stick it on a layer of dust or debris, the product will fall off the wall very quickly. It will not be superfluous to treat the base with a deep penetration primer, which will significantly strengthen it.

Tip: make notches on a too smooth surface with a pick, which will improve the adhesion of the stone to the base. After that, the arch must be well primed.

1. Prepare a cement mortar, the components of which are determined by the type artificial material. It usually consists of lime, sand, Portland cement and glue. Their exact ratio depends on the stone, so at this stage it will not be superfluous to use the recommendation of a specialist.

Since the mass of the material is small, it can be easily glued to the treated surface using, for example, liquid nails or special glue.

We cover the arch from the outside

1. First row. Docking walls to the arch should also be finished. Attach the first stone at their point of contact. Start the process from the bottom rows, gradually rising up. Use plastic crosses for uniform seams and use the building level to make the masonry even and neat.

1. Second row. It also begins at the junction of the wall and the arch. However, the first stone here should be pushed beyond the junction of the wall to the thickness of the finishing tile. Due to this, the elements are overlapped at the outer corners, allowing them not to be sealed in the future, and the masonry will become more durable. Next, lay the stones in a checkerboard pattern. The amount of material depends on the length of the rows.

1. Attach the finishing elements to the adjacent wall at their attachment points, when you get to the rounding of the arch, and cut them very carefully in an arc, keeping the radius. Take a pencil and mark the stone along the arched arch that protrudes from the arched interior of the arch, and cut that too.

Tip: to carefully cut the stone, you need to go through the markings with a construction knife several times, and then remove the excess with pliers.

To cut the stone, you can use an angle grinder ("grinder") or wire cutters. After that, sand all the irregularities with sandpaper. Adjust the remaining elements framing the arch in shape and size.

Facing the arch from the inside

- a complex and responsible stage. Approach him with special attention and accuracy.

1. Glue the decorative stone on the inside using the technology indicated above, but remember about overlapping.
2. Trim the tile if it is longer than the width of the opening. Use a hand saw for this, if the base of the product is gypsum, if cement - with an angle grinder.
3. After finishing the arch with artificial stone with your own hands, wait about 48 hours so that the material can connect well with the surface of the arch. Fill the joints with artificial stone mortar and smooth them gently with a soft rubber spatula or brush without pressure on the stone.

Try not to get the solution on the front of the product, and remove the excess with a soft cloth or sponge. If you wish, you can paint the stone in desired color, at the same time, the seams will be decorated.

Conclusion

Facing an arched opening with artificial stone requires concentration and accuracy. All work can be done independently, using conventional tools and materials. In the presented video in this article you will find Additional information on this topic.

There are many options for how to make the interior original and attractive. One solution is to create a beautiful arch from the doorway. But such a design by itself may not be enough. In some cases, you can not do without a spectacular finish. And for this, artificial stone is very often used.

About arches

The arch is an architectural element that plays the role of an opening in the interior. It is known that there are references to the first arches from the times of the Ancient East.

Given such a long history, it is not possible to know the reasons for the creation of arched structures. For a very long time, the building was built of stone and brick. It is already in our days that drywall, wood, plywood, as well as OSB, chipboard or fiberboard have been added to this list.

About decorative stone

This material is not just a great way to decorate the interior, it perfectly performs a protective function. Therefore, he was so fond of designers. Of course, if an artificial stone is used indoors, then its protective functions are reduced to resisting only accidental mechanical damage. And this material is used pointwise in the interior, the maximum that can be finished in one room is a wall. But most often the material is used as an addition to existing elements.

Benefits of a stone arch

This design option has almost no drawbacks. After all, the material does not rot, does not corrode and fungus. Decorative artificial stone consists of environmentally friendly components, therefore it is safe for health.

Why can't you use natural material? The fact is that, firstly, it is very expensive, and secondly, not all structures can withstand the weight natural stone. The same granite is three times heavier than its artificial counterpart.

There are a number of other advantages of this approach:

• not required special care- any detergent that does not contain abrasives will do;
• you can use an artificial analogue of any natural stone- manufacturers began to make very high-quality imitation;
• decorating stone arches with your own hands does not require special skills, so the procedure is easy.

Materials for creating a structure

Creating a stone arch in an apartment requires the use of a specific list of materials that need to be prepared in advance:

• the decorative stone itself;
• pencil;
• sandpaper;
• primer;
• mortar or glue;
• grout for seams.

Instruction

Finishing the arch with decorative stone starts from the traditional stage of surface preparation. It is necessary to smooth out the bumps using sandpaper, and then putty them using a pre-primer.

Preparation of the adhesive solution

You can lay a decorative stone on a special glue, on a cement-sand mortar or on liquid nails.

Clutch quality finishing material with base depends on roughness back side tiles and the quality of the adhesive mixture. If the solution needs to be prepared on its own, this should be done in small portions, since it sets quickly enough, losing its properties. You need to mix the powder and water in a convenient capacious container using a mixer (it can be a drill with a special nozzle). You need to mix until you get the consistency of thick sour cream.

Laying

Laying is done from the bottom up. You need to start from the corner of the opening-wall. The seam should be left approximately 4-5 mm. If corner stones are used, they must be glued from below. If flat ones are used, laying should be done with an overlap.

During the procedure, do not forget to check the horizontal laying. On an arc, elements can be trimmed to meet the required radius. This can be done with wire cutters or a grinder with a special nozzle.

The edges must be sanded with a file. When the finish is finished, you need to wait for the mortar or glue to dry. After that, you need to do the refinement of the seams. For these purposes, we use a grout of the appropriate color. To perform the procedure, it is better to use a construction syringe. Otherwise, you can use a rubber spatula. You can make the tool yourself. For this we cut square piece polyethylene, fold it in the form of a cone, fix it with tape. The tip of this element must be cut so that the resulting size corresponds to the size of the seams between the stones.

Next, one of these tools needs to press the grout into the seams in order to completely fill them. In this case, everything must be done carefully so that the material does not get on the front of the products. It remains to wait until the grout dries - the decorative stone arch is ready.

Seamless laying

In this case, the tiles are laid tightly to each other, so finishing the arch with artificial stone requires painstaking work. Glue or mortar is applied to the stone. If the laying is done from top to bottom, you can get a smooth border with clear lines.

Since the edges of the finishing material are well prepared, no pick-up time is required when laying, so the procedure is carried out quickly. At the end, the surface can be opened with an impregnation that will repel water and protect against the effects of chemicals.

Stone arch is inexpensive, but looks great

The design of the arch with a stone allows you to give this element of the interior more expressiveness and style. The room takes on a more refined and attractive appearance. This option looks especially good in the corridors and living rooms. In a word, the effect of such a finish is amazing, as you can see by looking at the photos of the options.