How to clean the iron from scale inside. Cleaning of aluminum coatings. What is "hard" and "soft" water

How to clean the iron from scale? New models are equipped with self-cleaning; for others, a pencil, citric acid and special cleaners will do. Scale does not form if the iron is used correctly. Increased rigidity water leads to the formation of lime scale in household electrical appliances. An iron whose steam outlets are clogged with scale will leave yellowish marks on the fabric. Every housewife should know how to descale the iron inside and out in order to prolong its service life.

Self cleaning function

The latest models of irons well-known firms equipped with a self-cleaning function. The instructions for using the appliance give clear instructions on how it works:

The electrical appliance is switched on maximum temperature and wait for it to heat up and turn off twice.
Then the iron is disconnected from the mains and press the self-cleaning button.
It is important to prepare a bowl or tray in advance into which the softened limescale will drain. The sink is not suitable for these purposes, since it will also have to be cleaned later.
Hot steam under pressure removes all contaminants through the holes of the device into a substituted container. For a more thorough cleaning, you can shake the iron vigorously from time to time, being careful not to burn yourself.
After cleaning is completed, it is necessary to wait for the appliance to cool down, then wash and wipe its working surface dry.

Before you start ironing, you should try the iron on an unnecessary piece of fabric: if minor scale stains continue to stand out, then you need to clean it again.

cleaning pencil

An inexpensive tool - a cleaning pencil will help the hostess decide how to descale the iron from the outside. The pencil will loosen lime deposits that have accumulated around the steam outlets. To clean, pour water into the tank, heat the device to maximum temperature and turn it off. When its sole has cooled down a little, it is carefully rubbed with a pencil. After 5-10 minutes, the iron is turned on again and an unnecessary rag folded in several layers is ironed with it, setting the intensive steam supply mode. The pencil helps to remove scale that has accumulated outside in the holes on the working surface of the appliance. Before cleaning the room, it is necessary to open the window, as lime deposits smell unpleasant.

Descale with citric acid

Some folk craftsmen claim that you can clean the scale with Pepsi-Cola soda and similar drinks, as they contain phosphoric acid, which dissolves organic compounds.

We boil scale from the iron

If a lot of scale has accumulated and the sediment is solid, you can use a potent agent - immerse the soleplate in a hot solution of citric acid or a special scale powder for household electrical appliances. To do this, perform the following steps:

2 wooden bars are placed in a deep baking sheet;
put an iron on the bars;
pour powder from plaque onto a baking sheet, calculating its amount by the volume of water necessary to immerse the device in the solution along the sole;
citric acid is put in an amount of 5-6 tbsp. l. per liter of water;
pour boiling water into a baking sheet so that it covers the sole of the iron;
leave the iron in a hot solution for 1 hour;
to more effectively remove limescale, you can place a baking sheet with a household appliance on the stove and heat over low heat for an hour.

Factory descalers

Conclusion

You can deal with scale different ways. Some models are equipped with a useful self-cleaning function. If there is no such function in the iron, you can clean the plaque from the outside with a pencil, and inside with a solution of citric acid or sparkling water. In the presence of hard limescale deposits, gently dipping the soleplate of the appliance into a hot solution of cleaning agent or citric acid will help. long time. You can, without waiting for the formation of plaque, immediately after buying an electrical appliance, regularly use a special descaler, following the instructions for use.

It is important to remember that the formation of scale is easily avoided if not raw, but distilled (in last resort, boiled) water, after ironing and cooling of the appliance, completely drain it and always store it in vertical position. These simple tips will allow the hostess to forget about the problem and no longer wonder how to clean the iron from scale inside at home.

The instruction manual says that only distilled water can be added to the water tank of the iron. According to the manufacturer's fair remark, following this recommendation, it will not be necessary to look for information over time on how to descale the iron at home.

Why do you need to descale your iron?

Even a few times using the iron with a tank filled with tap water without first cleaning it will be enough for the formation of scale on the heating element. It is wrong to ignore the formation of scale. An iron with a reservoir covered with formations cannot be used for ironing for one simple reason - it will leave spots of a “red” color on the surface of the materials.

That is why, having noticed the first signs of contamination of the tank to work in the steaming mode, you need to clean the iron from scale inside, Special attention giving holes for steam. To do this, there are several ways and means, both folk and professional.

What is self-cleaning and how it works

Many modern models irons are equipped with a "self-cleaning" function. This means that manufacturers have made sure that the devices are cleaned without human intervention if necessary. To start the function, in most cases it is necessary to fill the tank to the maximum, connect the power and let the device work at full capacity.

The iron is heated to the maximum and turned off several times in a row.
After reheating, the self-cleaning function is activated (usually the start button is located on the case).
At the moment the function is activated, steam with dirt and scale particles will begin to intensively emit from the steam holes, so it is better to do this over a special container.
Traces of scale and organic compounds are removed along with the steam output by shaking the iron.
The cleaned water tank inside the appliance is rinsed with clean distilled water.

So that cleaning the iron according to the indicated algorithm does not end with burns, you need to remember the ability of the device to maintain the temperature of the sole for a certain time without touching it with your hands.

Self-cleaning function - convenient, simple and reliable way descale the iron. But not all devices are equipped with it, therefore, alternative methods were invented to solve the problem of formations on the walls of the water tank of devices.

Hot iron treatment - how and why do they do it?

An effective way to remove scale on your own at home is a hot bath with the addition of chemical compositions. The cleaning process in this case is as follows:

Lay out two slats on a baking sheet.
The iron is fixed on a kind of bridge.
A mixture of anti-scale is poured into a baking sheet, either store-bought or prepared with your own hands from improvised ingredients (for example, citric acid at the rate of 5 tablespoons per liter of water).
Boil water in a separate container, pour it into a baking sheet in such a way that Bottom part the soleplate of the iron has been completely covered.
Leave the iron in this position for 1-2 hours.

When it is not possible to remove scale in this way, put the baking sheet on fire and boil for several minutes.

Lime deposits in the tank - folk methods

In addition to the above method, you can get rid of scale using one of the methods described below.

Option one. Solution based on mineral water. It is not difficult, and most importantly, you can effectively clean a steam iron with a simple mineral water. To do this, you need mineral water and a capacious container to collect liquid with deposits.

The cleaning process begins with filling the tank mineral water followed by heating to maximum. Steam is released over the prepared dishes by sharply pressing the button, thus provoking the exfoliation of the scale layer along with the heated mineral water. Manipulations are repeated several times. The final stage- washing the iron with ordinary distilled water, all the same with steam removal.

Proven cleaning method citric acid- natural, affordable and safe means. To remove traces of limescale, citric acid (1 sachet) is diluted in hot water and added to the reservoir of the device. The iron is turned on to the maximum heating mode, shaken vigorously several times and press the steam release button. In most cases, in this way it is possible to get rid of the main part of the scale.

There is another way to prepare an effective citric acid-based product, suitable not only for descaling, but also for cleaning the sole of the device from old dirt particles and melted fabric. To prepare the remedy, use 1.5 tablespoons of acid, 2 tablespoons of sodium carbonate and a tablespoon of vinegar. It is believed that the descaling agent will solve the problem in no more than 30 minutes.

The device is treated in the same way as the hot bath described above, except that the acid is mixed with soda and vinegar. The iron is placed in a shallow container with dry cleaning mixtures, where boiling water is gradually added, making sure that its height does not rise above the permissible norm.

After such cleaning, the iron is thoroughly wiped dry, if necessary, they proceed to re-cleaning, but this time the soles.

as available and safe means vinegar is also used. You can clean the iron with vinegar at home without special efforts, observing the following algorithm:

The iron is placed in a deep container.
Two glasses of vinegar are mixed with a liter of water.
The finished solution is poured into a container so that it covers the sole by half.
The back of the iron is lifted, installing it on a “pedestal” built with your own hands from improvised means.
The steam release function is turned on at full power, the container is placed on the stove and brought to a boil.
Cool the liquid and repeat the steps.
Shake the iron to separate the scale along with the steam.

After the end of the procedure, you need to rinse the iron and leave it inoperative for a day.

Chemical attack - specialized means

When folk methods do not help to make the iron with steam cleaner, or do not inspire confidence, specialized preparations are suitable for delicate cleaning without damaging the parts of the device.

One such tool is Top House. It includes components that protect against premature failure of the iron elements. The German-made preparation is suitable for both internal and external cleaning.

At points of sale household chemicals you can also purchase products such as "Cillit" or "Antinakipin", as well as special cleaning pencils. Lack of funds - sharp peculiar smell and in some cases the price. The advantages include ease of use and efficiency. It is necessary to work with industrial preparations, observing safety measures, using protective gloves.

How to clean the steam outlets on the iron?

It is not enough to clean the water tank in the iron, leaving the holes on the sole unattended. In order for the device to work in full mode, it is necessary to devote time to the steam holes, using all the same mineral water or citric acid. The iron is placed in the solution on the bars, additionally treating each hole with a syringe.

The cleaning procedure is repeated several times until a positive result is achieved.

When the iron stains clothes, this indicates scale inside the tank, which means that the steam holes are dirty. The solution to the problem will be professional tools or hydrogen peroxide. To treat the holes and the reservoir, wipe the surface with a cotton pad, allowing it to come into contact with the drug for several hours. After the specified time has elapsed, after making sure that the steam holes have been cleaned, the tank and the soleplate are wiped dry with a clean cloth.

How to prevent the formation of scale in the iron?

By following the rules of operation of the device, you can keep it in working condition throughout the operating period declared by the manufacturer. To do this, you must first clean the tank for water from the tap, if it has remained there from previous use, carefully treat it with one of the above funds and refill with clean distilled water.

In the future, during the operation it is allowed to use exclusively purified water.

Sole of the iron - how to clean from adhering fabrics?

When you need to clean the sole of the iron from the remnants of melted fabrics, it is better to use proven methods. It could be paraffin candle, special pencil, hydrogen peroxide or ordinary vinegar.

An iron is an indispensable household appliance in every home. But, no matter how carefully you treat this miracle of technology, plaque appears on the sole of the iron over time, and scale accumulates in the water tank. For many housewives, cleaning the iron is a sore point, because if you choose the wrong product, the product may break. In addition, a dirty sole or scale can lead to problems during ironing.

One of the reasons for the rapid contamination of the iron is the failure to comply with temperature conditions. For ironing synthetics and silk, for example, the iron does not need to be heated too much, and woolen items should be ironed with a very hot iron, but only through damp gauze.

Let's now figure out how to clean the iron at home without the help of expensive tools.

How to clean the soleplate of an iron

Ammonia and vinegar

For this procedure, you will need a coarse cloth, not a large number of ammonia and 9% vinegar. First you need to open the windows to ventilate the room well, soak an old towel in vinegar and try to remove dirt from the soleplate of the turned off iron.

To do this, of course, you need to rub hard and often moisten the rag in vinegar. Ammonia is recommended to be added to vinegar for greater effectiveness.

When the surface is clean, you need to iron some unnecessary fabric.

Detergent and soda

You need to mix a teaspoon of soda with dishwashing detergent to get a homogeneous gruel. This gruel must be evenly applied to the sole of the iron with a sponge and wait 5-10 minutes. After that, you need to take a damp cloth and begin to intensively rub the sole until it is completely clean. Finally, wipe the iron with a dry cloth.

Hydrogen peroxide

It is necessary to moisten a piece of cotton wool in peroxide and carefully wipe the sole of the iron. Some recommend using acetone or nail polish remover instead of peroxide. But this must be done very carefully so that the contained chemical particles do not get on the plastic part of the device.

Indelible pencil

This inexpensive remedy you can buy at a hardware store, rub it well on the heated sole of the iron and wait for a while. When the agent softens the soot, you need to take a soft, lint-free rag and remove it with a light movement. This is extremely simple and probably the most effective method, allowing you to clean the sole of the device without much effort. When the iron has completely cooled down, its base must be wiped with a cloth dipped in water.

Hydroperite

If there is no chemical pencil in the house, you can use hydroperite. For a complete cleaning of the iron, you need two tablets. First you need to warm up the device, rub the sole of the preparations and wait 30-40 minutes, after which you need to get rid of dirt with a damp cloth. After the iron has cooled down, wipe it dry with a cloth.

Toothpaste

As practice shows, toothpaste can be used to clean not only teeth, but also irons. To do this, apply a small amount of paste on the warm base of the device, rub it with an old brush and leave for 25-30 minutes, then rinse warm water and wipe with a rag. But this method can only be used for irons with a metal coating (steel, aluminum).

The Teflon surface in this way can be damaged and ruin the iron.

fine salt

This method also cannot be used on Teflon-coated irons. So, you need to pour on an old unnecessary fabric or Blank sheet paper with a thick layer of salt, then heat the iron and run it over the layer of salt as if ironing clothes. This must be done with light pressure on the iron, otherwise you will not get the result.

It is recommended to use "Extra" salt, and to increase the effectiveness of the procedure, the salt can be mixed with crushed candle paraffin. When the iron has cooled down, the clean soleplate must first be wiped with a damp and then dry cloth.

Laundry soap

This method is very simple and has been used by many for a long time. Immediately after ironing clothes, the sole of the iron must be rubbed laundry soap and wash off with a damp cloth after the appliance has cooled down.

How to descale an iron

1. If yellow drops of water or white grains of sand fly out of the outlets when ironing clothes, it's time to clean the iron if you want it to serve you for a long time. This method is intended for those irons that have a self-cleaning system.

So, first you need to look in the instructions for what water can be used for this model, then pour it into the tank until maximum level, heat up the appliance to the maximum temperature and wait for the automatic switch-off.

Then the procedure must be repeated one more time, after which place the device on a heat-resistant surface (above a basin, bathtub or sink) with the sole down and press the “automatic cleaning” button. The steam coming out of the holes of the sole will clean them from scale, dirt and dust.

After that, you need to turn off the device, wait for it to cool completely, rinse the tank 2-3 times clean water and wipe the bottom of the device with a dry cloth.

2. You can also use citric acid to descale your iron. This is an effective and proven method that you can safely use. You need to boil a glass of water, dilute a bag of citric acid in it, pour the resulting solution into the tank, set the maximum temperature and turn on the iron.

When the appliance turns off, you need to press the steam button 3-4 times and repeat the operation if necessary. After that, you need to turn off the device and remove the acid solution from the tank.

3. The problem can also be solved in the following way: take a wide frying pan, baking sheet or other suitable container, put the iron inside and pour water so that it completely covers the soleplate of the appliance. Water must first be mixed with table vinegar (two glasses of vinegar per liter of water).

It is important that the back of the iron is slightly higher than the front, so be sure to put 2-3 coins under it. Then you need to set the maximum steam regulator, put the container with the iron on the fire and boil vinegar solution, after that it needs to be allowed to cool and boil again.

Now you know how to clean the iron from soot and scale. Try to clean the device in a timely manner to prevent its premature failure!

Every hostess knows that scale and soot often form on the iron, which not only affect appearance appliance, but may even damage or stain things.

To prevent this from happening, you need to be well acquainted with the rules for operating the iron and use various modes for certain types of fabric.

How can I clean the iron at home?

Unfortunately, even with proper use, plaque may appear on the iron due to the hardness of water and synthetics. Scale inside the appliance and rust make the work of the hostess very difficult, making ironing a laborious and almost impossible task. Such an iron can ruin all white things, and all kinds of modern and improved powders and detergents unable to cope with the terrible pollution. Not every family can afford to buy a new household appliance every time - this is an expensive and completely unnecessary task, because the old one can be cleaned.

Important to remember! For ironing silk and synthetics, the iron should not be too hot, and wool items are best ironed by placing wet gauze on them.

If you need to clean the iron from scale and soot, but you don’t have tools specially designed for this in your apartment, then you should not immediately run to the store to get them. You can clean the device with the help of those things that every good housewife has at hand:

Vinegar. The iron must be turned off, because this remedy evaporates quickly. You need to moisten a rough cloth with vinegar and just rub the dirty surface of the device. For more quick effect should be added to it ammonia. If you were unable to clean the iron the first time, then you can heat it up slightly, and only then rub it with a cloth dipped in vinegar. Using this method, you must understand that inhaling vinegar vapor is dangerous to health, so this procedure is best done on outdoors or in the garage, in extreme cases - at home, but with the windows fully open.
Salt. It will greatly help to get rid of rust and plaque on the surface of the iron. Pour a large amount of salt onto clean paper or a cloth and rub the heated device strongly. It is worth remembering that this method can harm Teflon-coated irons.
Salt with paraffin. This mixture gives the most best result than the previous one. You need to do everything the same. Using this method, you can easily remove all the bumps and small dents on the iron. Do not forget that it is better not to use a newspaper in cases 2 and 3, because printing ink may remain on the iron.
Hydrogen peroxide. Soak a piece of cotton wool in it, then completely wipe the surface of the iron. Most importantly - no extra and bad smell you won't feel. If you don't have hydrogen peroxide on hand, you can use nail polish remover or acetone.
Lemon acid. It should be diluted in a small amount of water, soak an unnecessary cloth in the resulting solution and clean the iron with a cloth.

How to clean the steam iron inside from scale at home?

Most people do not pay attention to the manufacturer's recommendations about the water to be poured into the steam iron. It must be necessarily distilled, otherwise the service life household item decreases significantly.

Due to ordinary tap water, scale appears inside the device, so the channels that remove vapors are clogged. Thus, the technique begins to leave stains on clothes. It is very convenient that some models are equipped with self-cleaning, so you should not worry about the normal operation of the device and the integrity of things, but such irons are expensive. If you don't have this electrical appliance, then below are some tips on cleaning the scale inside:

In a small saucepan, you need to boil water and stir citric acid in it, pour the resulting liquid into the iron and turn it on for a very high temperature. After heating, press the steam release button several times. After turning off the device and waiting until it cools down a bit, wipe off the remaining citric acid with a paper towel. This method is suitable for those housewives who have very little scale inside the iron.
Preheat the iron well, then unplug it and set it securely so that the soleplate is on top. Pour a few drops of Cillit into the steam outlet and wait 10 minutes. Later, wipe off all the dirt with a sponge and rinse the iron well.
If, after ironing, rusty stains remain on the linen, then Antinakipin will help you. The product should be diluted with water and pour into the iron, turning it on. After heating, turn off the device and leave for 30 minutes. At the end, rinse the iron well from rust and scale.
Boil water and pour vinegar into it. Place the iron in a bowl or wide saucepan and pour the resulting liquid over the level of the sole. Let the base of the appliance stand like this for several hours. Then gently wipe the iron and remove dirt from it.

Important point! Never clean the iron with metal brushes and materials that can easily damage its surface. A cold iron can be cleaned with a nylon washcloth, and a hot one with a terry cloth and wooden scrapers.

How to clean the sole of the iron from carbon deposits at home?

If your electrical appliance has begun to leave brown spots on clothes, then it must be cleaned. It is very simple to do, much easier than watering flowers and hammering nails. The most important thing is the presence necessary funds and thoughtful approach. There are several ways to clean the iron from carbon deposits at home:

If your iron is in good condition, but there is a small amount of carbon deposits on the soleplate, then the usual iron can cope with it. toothpaste. It needs to be applied a little to a wet cloth and wipe the device. At the end, be sure to dry the soleplate of the iron and remove all dirt.
They invented an excellent invention - a pencil with which you can easily remove carbon deposits from the surface of the iron. You just need to read the instructions and use this thing correctly.
Pour salt on a piece of paper and drive it with a heated iron, pressing with all your might. This method is called "mother's" because many housewives get rid of soot in this way.

There are a few rules to follow when cleaning ceramic sole iron:

do not use scratching materials;
in no case do not clean the iron with metal utensils or knives;
choose methods without mechanical detachment of carbon deposits (dissolve it).

Tip of the day! To make the iron less dirty, it is advisable to wipe it after each ironing. wet wipe or gauze.

How to clean a burnt Teflon iron?

Cleaning an ordinary iron is not difficult. However, Teflon-coated devices are a very delicate and careful matter. These irons require more careful and careful attitude to yourself.

If the iron is a little dirty, then a plain cloth moistened with water will help. You just need to wipe the surface of the device with it.
If the first method did not help, then the iron can be wiped with a cotton pad or a piece of cloth dipped in vinegar and ammonia. In this case, the iron must be warm.
If any material (plastic, polyethylene, etc.) is burnt to the surface of the iron, then it absolutely cannot be torn off by force or with a knife or other sharp object! You should wait until the iron dries and wipe its cover with cotton soaked in acetone or a liquid that removes varnish.
If there are small irregularities on the surface of the iron, then this situation can be corrected with the help of paraffin. Mix the crushed candle with fine salt, spread it all out on a cloth, and cover it with a paper towel on top. Then iron the structure with an iron (the temperature of the device should not exceed 120 degrees). At the end, wipe the sole thoroughly with a clean piece of cloth.

How to clean an iron at home: video

A modern steam iron periodically “pleases” with scale inside and in the aisles outside. Why is this happening? Scale is a precipitate of salts that are released from hard water when heated strongly. How to clean a philips iron and a brown with rust holes?

Sediment accumulates on heating elements, hardens and eventually interferes with the normal operation of kettles, irons and washing machines. And although manufacturers advise filling the iron with a special softened liquid, this recommendation is often ignored in everyday life. As a result, plaque appears from tap water: lime particles clog the steam generator chamber, water and steam nozzles, the water line, stick to the heating element and even come out, clogging the holes on the soleplate of the iron.

The scale inside the iron is especially “insidious” - gray-red particles “shoot” from the inside from the steam holes at the most inopportune moment, especially when the steamer mode is turned on. For example, when you decide to iron a light-colored blouse before a big event. It is very difficult to remove such contaminants from clothes.

Therefore, while ironing, you should always keep a piece of clean white cloth at hand. Starting the process, first go over the fabric with an iron, try to steam the flap. And only after a successful test, proceed to the folds on the clothes. After all, even a perfectly clean sole of the device does not guarantee that there are no “surprises” inside.

How to descale an iron: professional solutions

How to clean the iron from scale? It is possible to solve the problem of internal pollution by adopting special store funds for cleaning the iron from scale, and preparations for burnt plaque are also suitable for external processing. In addition, effective cleaners are easy to prepare yourself from improvised ingredients.

Professional electric assistant care products are available in the form of solid sticks or liquid cleaning emulsions. The former are suitable for external processing, and the latter for cleaning scale inside.

magic pencil. Effective remedy from the category of "cheap and cheerful." Cleaning the iron with a descaling rod has one minus - strong smell ammonia, so at the end of the procedure you will have to ventilate the room. Instructions for use: heat the appliance to maximum, unplug it, then go over the sole with a pencil, paying special attention to the steam holes. After a couple of minutes, when the product has eaten away the dirt, iron any cotton rag. All soot should remain on the fabric. Wipe holes additionally. It is enough to apply the rod once. One pencil is enough for several cleanings.
The time of "Antinakipin". The acids that make up the product neutralize salts or scale that has already formed. Instructions for use: take two tablespoons of Antinakipin, dilute in a glass of water, pour the solution into the water container in the iron. Heat the device to the maximum, turn off and leave for half an hour. Then turn on the appliance again and press the steam button several times. After the procedure, rinse the container to remove chemical residues.

The new generation of ironers have an automatic cleaning function that helps to remove scale from the iron both inside and out. It is necessary to fill the device with water, heat it up and wait until it turns itself off. After that, heat the iron again until it switches off. Click on the special cleaning button. All scale will come out with the steam.

Plaque inside: one instruction and 3 remedies

If you are looking for how to treat the iron from scale, but there are no special preparations at hand, use proven folk recipes. Internal pollution is disposed of mainly by three means. You can descale the inside of the iron with citric acid, sparkling water, or vinegar. Solutions are prepared as follows:

lemon acid- two tablespoons in a glass of water;
vinegar - a glass of 9% product per liter of water;
soda - does not require other components, is poured into the tank to the top.

These products tend to break down salt and lime deposits. So you can clean not only irons, but also washing machines, teapots. Instructions for use for all three substances are the same and consist of six steps.

Pour the liquid into the reservoir of the household appliance and heat to the maximum.
Pull the plug out of the socket.
Shake the device.
Press the steam button several times, after placing a cotton cloth under the appliance.
After complete cooling, drain the remaining liquid.
Turn the iron back on and repeat the previous steps a few more times until completely clean.

If cleaning was carried out with vinegar or lemon, be sure to wash the device after the procedure by boiling distilled water in it. Then wet soft cloth wipe the sole, paying attention to the holes. Start ironing only after making sure that the scale flakes have completely come out.

Plaque outside: how to process holes

You can clean the holes in the iron from scale using the tools listed above. This is done using cotton swab or matches with cotton wool. Just soak the tool in the liquid of your choice and carefully clean the steam holes. By the same principle, ammonia can also be used. But there are other methods as well. They are suitable if the steam passages are very clogged, and limescale has spread along the sole.

Peroxide

Soak in hydrogen peroxide cotton pad and rub the soleplate of a cold iron.
Moisturize the recesses especially carefully.
Wipe until traces of soot disappear.
Heat the iron and go over the unnecessary piece of fabric.

Hydroperite tablet

Heat up the iron to the maximum.
Walk through the holes with a hydroperite tablet, fixing it with tweezers. Be careful not to burn yourself.
Repeat if necessary.
After cooling, wash the sole with soapy water.
Wipe with a damp and then dry cloth.

Toothpaste

Use a soft brush or cotton swab to brush the holes in the soleplate with toothpaste.
Turn on the appliance, heat up as much as possible and iron the cotton fabric.
After cooling, wash the sole with soapy water.
Wipe with a damp and then dry cloth.

Do not attempt to remove scale from the iron by scraping it off the outside with a knife or other sharp object. Do not rub the surface with metal washcloths and abrasive products. Aggressive methods will ruin the metal or Teflon coating and adversely affect the performance of the equipment.

Steam Generator Care

In the arsenal modern hostess, in addition to the iron, there is such a multifunctional miracle device as a steam generator. The device helps to quickly get rid of wrinkles on clothes without removing them from the hanger, it processes curtains, carpets, sofas with hot air and also needs to be cleaned from scale. With absence special means you can also do homemade.

Lemon acid. Diluted in water at the rate of two tablespoons per liter, and poured into the steam generator tank. The device turns on, and the acidified water is “evaporated” onto an unnecessary fabric.
Vinegar . It is necessary to fill a quarter of the steam generator tank with the product (it is not necessary to dilute with water), and turn on the device. Steam the unwanted fabric until all the vinegar is gone from the reservoir.

If the steam generator is pump-action, that is, steam is supplied under pressure, it is better not to engage in amateur activities, but to take it to a service center for cleaning.

Prevention measures

Any disease is easier to prevent than to cure. In order not to think about how to remove scale in the flask of the iron for as long as possible, it is recommended to follow simple operating rules. There are only two main ones.

Regular care. Wipe the soleplate after every ironing soft cloth lint-free and store the appliance in a cupboard. Take action at the first sign of scale formation.
Proper water. Use distilled, boiled, filtered, melted or rain water. The ideal option there will be special water for ironing, which is sold in household chemical stores.

By the way, modern manufacturers have already figured out how to clean a steam iron from scale without any effort at all. So, according to reviews, you should pay attention to models equipped with filters - containers for scale. The function is in the Philips, Tefal equipment lines. In such devices, all scale is automatically collected in a special compartment, which is easy to remove and wash as it gets dirty.