How to fold a shirt without wrinkles? Recommendations and useful tips. How not to wrinkle a shirt when traveling or on a business trip

A shirt is a wardrobe item that should be perfectly ironed. Storing clothes on hangers is easy and convenient method. There are times when you need to fold a shirt carefully, without creasing or ruining the perfect appearance. When folded correctly, you can not only maintain smoothness, but also save space on a shelf in a closet or in a suitcase. Rolling it neatly is not a difficult task, as it seems at first glance. It is enough to follow the recommendations described in the article.

What to do with a shirt before folding it

Before folding you need to do a few things important actions. First, wash and dry. It is not recommended to put dirty things together with clean ones. Secondly, it is important to iron the shirt. Wait for the model to cool down. Otherwise, folds will appear at the folds. Next we will tell you in more detail about each point.

Before starting washing, it is recommended to study the label on the seam of the product. Follow the recommendations indicated on it. Usually it says: wash at 40 degrees without using bleach. There is no need to wring out after washing. Just hang it on a hanger. The method helps make ironing easier.

When collars and cuffs become dirty, the most frequently soiled items are sold. special means for cleansing. Starched parts should not be rubbed with a brush, as the material will be deformed.

The next stage is ironing. The process will be easier on a damp shirt. At completely dry A spray bottle will help moisten the material. Must be observed temperature regime depending on the composition of the material. It is better to iron dark outfits from the inside out.

The perfect look of a shirt is better preserved on hangers. After ironing, wait for the material to cool completely and hang it in the closet. If this is not possible, carefully place it on the shelf. If you follow the following recommendations, bends will not appear.

How to fold a shirt correctly

Anyone can learn how to pack things so that they don't get wrinkled. Sellers often use these methods. But what should you do if you need to put things away for travel without spoiling the appearance? The process is quite simple and takes little time.

To begin, lay the shirt on the table and fasten the buttons except the cuff buttons. To properly remove your shirt, follow these guidelines:

Wait until it cools completely after ironing. If there are a lot of shirts, iron everything first, then start assembling.
Maintain straight lines. The assembled sweater should not be skewed or taper towards the bottom.
To maintain the shape, place a piece of cardboard inside. Cut the rectangle to size and place it on the back before assembling.
To protect the material from stains, wrap it in paper or cloth. The presence of packaging preserves the shape of the clothing.
For regular business trips, it is advisable to buy a briefcase - a special bag for transporting business-style outfits.

With long sleeve

For rolling things up long sleeve I'll have to remember my geometry lessons. Here it is advisable to be able to visually divide an object into parts.

Sleeves to the sides.

One of the methods to collect clothes neatly is to use the sleeves to the sides. Consists of stages:

Fasten with buttons, except for the cuff buttons.
Place face down.
Visually divide into three parts horizontally. We bend the lower part back, reaching the level of the elbow.
Bend left right side at the level of the center of the shoulder. Fold the sleeve in thirds, the cuff should be on top.
In this way, bend the left side panel to the right. Place the folded left sleeve next to the right. Place the cuff next to the collar.
bend bottom part blouse again, reaching the collar.

Sleeves at the back.

The model lies on a flat surface with its front part. The buttons are fastened. Before laying, smooth it out well with your hands. Next in order:

Start collecting from the left side. Grasp the middle of the shoulder with one hand and mentally draw a straight line down. Grab this point with your other hand. This is how a third of the product separated. Fold this part over the back.
If everything is done correctly, the sleeve should lie diagonally. Bend it parallel to the sidewall. Do the same with right side so that they are close.
Fold the product folded into a rectangle into thirds. To do this, measure a palm-sized distance from below and fold this part over the back. Fold the rectangle in half again to the collar.
The outfit is folded neatly and will not wrinkle. All that remains is to put it on a shelf or suitcase.

Short-sleeve

Blouses with short sleeves are assembled in the same way as with long sleeves. IN in this case there are no unnecessary manipulations. Occurs in several stages:

Fasten the buttons.
Place face down.
Divide vertically in thirds, fold left side to the back along a line from the middle of the shoulder.
Fold the sleeve twice, while the cuff does not fold, but remains flat.
Carry out the same manipulations with the right side.
Next, fold the bottom of the shirt along the back to the top twice.

Universal methods

In addition to the above methods, universal methods are practiced, suitable for products with long, short sleeves and polo shirts. Here you will need a flat surface. Before starting work, iron the fabric and let it cool.

Fasten the buttons and turn the model back up. If you don’t have enough skills in proper styling, use a thick magazine, placing it on the back. The edge of the magazine should touch the edge of the collar. Fold the side edge, covering half of the magazine. Then, roll up the sleeve, bending it three times. Carry out the same manipulations with the other side. Further bottom edge tuck it to the collar. The method leaves minimal amount folds on the material.

Another simple folding method is using a special board. Place the product down on the device front side, roll up in a few quick movements. On such a board you can collect any clothes: from shirts to shorts.

A quick way is to roll it up. Fold in half along the back, tuck up the sleeves and roll up. But this method leaves a lot of dents, so it is only suitable for saving space in a bag or suitcase.

How to put shirts in a closet

The shirt should be buttoned and well straightened.
Ventilate the cabinet periodically.
There should be hangers suitable size.

If the closet is not spacious, a floor hanger will help by replacing the chest of drawers. Things will stay fresh for a long time.

Shirts that are rarely worn can be conveniently stored on a shelf, put away on the far shelf. Several shirts can be folded in a stack, alternating the location of the collar. Then the stack will be even. It is convenient to arrange clothes by color and type of fabric. It is preferable to store silk blouses on hangers. Knitted ones can stretch on a hanger. Linen and cotton items can be stored on a shelf without fear of them becoming wrinkled. These items are easy to iron.

Shouldn't be in the closet household chemicals, since the fabric absorbs the smell. It is advisable to ventilate the closet once a week.

How to fold a shirt for travel

It is not always possible to carry an iron with you and put things in proper shape upon arrival. If you travel frequently on business, the ability to put away your clothes properly will come in handy. Let's talk about recommendations on how to fold a shirt for travel.

In a suitcase

To avoid bruises, place a rectangle of cardboard inside the back of the suitcase. The shape of the model will last longer and better. To prevent the fabric from fraying or becoming dirty, wrap it in paper or place it in a special insert.

To avoid deformation of the collar, it is recommended to fold blouses like a jack. The best option To maintain the shape of the collar, there will be a special plastic insert, sold along with the shirt.

In the bag

Putting a blouse into a bag without creasing is a difficult task. Especially if it's made from natural fabric, bruises cannot be avoided. It’s easier to fold things made of synthetics and wool by rolling them. When assembling several shirts, lay them on top of each other, one by one, folding the sleeves towards the middle. Roll into a roll, starting from the bottom.

In a backpack

Clothes are stored in a backpack in the same way as in a bag. To save space, it is rolled up. Folding using cardboard will not work in this case. The blouse should lie at the very top so that other items do not wrinkle the material.

Holdall

It’s convenient to transport clothes in a suitcase and not have to worry about the model getting wrinkled. Another advantage of a briefcase is that it can be carried into the aircraft cabin as hand luggage, since it is small in size. This type The bag is waterproof and allows you to carry a laptop.

There are several types of wallet:

Case from soft fabric. Designed for one suit.
Folding briefcase. It has one main compartment and several small pockets. Holds two or three suits.
Large briefcase on wheels with retractable handle. Contains small wardrobe. It has a compartment for shoes.
A briefcase with a harness that can be carried on the shoulder. Suitable for short trips.

These bags have belts for securing clothes; shirts are stored on hangers. Therefore, a briefcase is the most reliable way transportation of things.

Unusual ways

Except conventional method put things there the same way non-standard methods— convenient and fast, not requiring special skills.

Mechanical shirt folder

Not everyone can remove wardrobe items in the same way as store clerks. That's why a mechanical folder comes to the rescue. This device will fold any wardrobe item quickly and efficiently. They fold T-shirts, sweaters and even trousers. Advantages of this device:

Folds any clothes in a few seconds.
There are no dents after folding.
All items folded are the same size.

Using the folder is easy: lay the product face down on the device, first bend the sides, then fold the product in half.

This device can be bought in a store or made independently.
Folding using cardboard

Assembling a blouse using cardboard is convenient for traveling. The cardboard will not wrinkle and will retain its shape. Fasten all buttons. Place the product with its back facing up, place a cardboard rectangle on top so that the paper line is in contact with the collar line. Bend the side part to the middle of the shoulder. Next, fold the sleeve. Do the same with the other side. Next, fold the bottom twice.

How to quickly remove small bruises

There are different methods eliminating wrinkles on fabric. But there is no such method that removes creases from any type of material. Any product needs to be cared for differently. Ways to eliminate bruises:

The most proven and reliable method is ironing.
The steamer is gentle on fabric and quickly removes wrinkles and creases.
If you don’t have an iron at hand, you can iron your clothes using a press. Place the product on hard surface and put something heavy on the crease, for example a book.
Spray the product with water from a spray bottle, hang it on a hanger and wait to dry.
Unusual and effective way– hair straighteners. Quickly and efficiently eliminate minor fabric defects.

To prevent the shirt from becoming wrinkled during transportation, it is still advisable to fold it carefully before leaving. If the product is wrinkled and you don’t have a steamer at hand, turn it on in the bathroom hot water. Wait until there is a lot of steam. Let the item steam for 10 minutes, then hang it on a hanger in a dry room. The shirt will look perfect.

Before folding, iron the blouse and let it cool. Otherwise they will be wrinkled. They need to be stacked in a closet, stacked like a jack. Hang on hangers of appropriate size. The buttons must be fastened.

For transportation, it is better to choose a suitcase with a hard back. Place shirts at the very top of the suitcase. It is advisable to wrap items made of delicate fabrics in paper or put them in a special case. For regular trips, it is more convenient to buy a backpack.

Tell me, dear ladies, do you often iron your husband’s clothes? And if he goes on business trips, do you know a couple of secrets so that he doesn’t get wrinkled? After all, men are such a people that not every one of them will take care of the ironing of their shirt or carry a portable iron in their suitcase. And not always and not in all apartments it is possible to install a closet with a compartment for hangers, where shirts are usually hung. Will you really have to start every morning with the hated ironing of shirts in this case?

In this article we will share a couple of tricks to avoid wrinkles. We’ll also tell you how best to store shirts and transport them. The most important rule in such a difficult task is how to carefully fold a shirt - let it cool a little after ironing. Do not fold it right away, because a freshly ironed item will quickly take the shape you give it.

Before folding the shirt, make sure that you have fastened it with all the buttons - in this form it will retain the shape that it should have on your husband, without unnecessary bends and folds. After this, turn the item upside down and fold the sleeves one on top of the other. Now, to fold the shirt without any part of it getting wrinkled, carefully fold the sides over the sleeves. Spread it out and fold it in half. Store folded shirts with the collar and buttons facing up to reduce pressure on them. As you can see, everything is very simple.

But that is not all. In order to transport a shirt in a suitcase during business trips, use boxes. Pack the shirt the same way it was packaged in the store. If you are flying by plane, you can ask when checking in to baggage to mark the box with shirts with a label that is used to mark fragile cargo. Then it will not be crushed during transportation, and at the destination it will be handed over to original form. In addition, in this form, even a slightly wrinkled shirt will be easily smoothed out if you hang it on a hanger for half an hour.

How to fold a shirt so it doesn’t wrinkle at home? First, stock up on a small piece of cardboard. After you have ironed the shirt, cut a strip of cardboard to the appropriate length and insert it to maintain the shape of the collar, just as you would normally do with a factory wrap. Then, even if pressed down by other linen, it will not require additional ironing of the collar. In addition, shirts that have already been ironed, cooled and folded as indicated above are best stored on a separate shelf in the closet. Fold them one on top of the other, turning the collars in different sides in one. So less chance Having taken a shirt out of the closet in the morning, you find that it needs additional ironing.

Of course, all the advice on how to fold a shirt without wrinkles pales in comparison to a freshly ironed item. But in the extreme conditions of your departure for a couple of days, your husband’s business trip, absence free space under trempel with shirts, when moving or visiting, these recommendations can serve you good service and emphasize the image of a good wife and a reasonable housewife who remembers even such a little thing as an ironed shirt.

Have you ever been to a store where the employees folded their shirts in such a neat way that you rushed to go home and try it out, only to realize how difficult it is to replicate the process? But if you fold a shirt instead of hanging it in a closet, this will not only free up precious centimeters of space in your wardrobe, but will also help get rid of unnecessary wrinkles and folds, and will also reduce ironing time. If you want to turn your closet into a haven for those perfectly folded shirts, or perhaps want to be polite and re-fold the item you tried on in the store section, then follow these steps: simple steps. This will leave your shirt folded neatly and flat!

Method 1

Lay the shirt on a flat surface with its back facing you, spreading it out evenly and making sure it is buttoned. A fully buttoned shirt results in a tight, wrinkle-free package. Let the sleeves lie at their natural length.
Fold the sleeves towards the middle of the back. Fold each sleeve horizontally so that the cuffs meet mid-back. Try not to wrap inside side seams shirts.
Fold the sides towards the middle. Fold both sides again, this time so that the side seams of the shirt run evenly from the shoulder to the hem and meet under the collar, creating a wide V-shape. Further down the shirt, the sides may not meet.
Fold in half lengthwise. Holding the bottom of the shirt with both hands, fold it in half lengthwise from the bottom up so that the bottom edge is under the bottom of the collar. Do this once or twice, depending on the length of the shirt and the depth of your storage space. Turn the folded shirt over and store it.

Advice:

The process can also be done with hooded sweatshirts (roll the hood down before initially folding the sleeves in), zipped sweaters, button-ups (do the zipper or buttons up before folding), etc. It really doesn't matter what type of clothing you fold this way. Even T-shirts with short sleeve can be folded using this method. The length of the sleeves may be excessively short, so simply roll them inward slightly, performing the remaining steps in the same way.

Method 2

Place the shirt face down on a flat surface, straighten it out, and pull out the sleeves to form a T shape.
Fold one of the sleeves, starting from the shoulder, slightly away from the collar, so that its end is in the middle of the second.
Roll the same sleeve like an accordion in three layers. Mentally divide it into three sections. Fold it in the opposite direction from the direction it took before, making a fold 1/3 of the way from the shoulder. Fold the part sticking out from the side of the shirt - it will be approximately in the middle of the previous one. The entire folded sleeve should not extend beyond the original fold.
Fold the second sleeve in the same way as the first, starting at the shoulder, slightly away from the collar on the other side, so that it goes over the already folded sleeve. The remaining folded parts of the shirt from the sleeves down on both sides should not touch.
Then make the same accordion from the second sleeve, completely covering the previous one.
Fold the bottom edge of the shirt up toward the collar, dividing the item in half. The bottom should be directly under the collar.
Turn the shirt right side up and place it in your closet or suitcase.

Unfortunately, there is no one the right way Using proper folding, completely protect the shirt from wrinkles. In fact, the appearance of bruises is determined by the following factors:

type of fabric and weave of the shirt;
how long your clothes have been packed;
how tightly your clothes were packed (the less in your luggage, the better!).

In the wardrobe of every self-respecting man, shirts are one of the most necessary items. Therefore, it is important to be able to fold a shirt so that it does not wrinkle.

Everyday plain colored shirts, festive snow-white shirts with starched collars can create either a strict business look or a light casual one. Casual style. As a rule, quality shirts are made of cotton, so for a shirt to look perfect, it needs special care and attention. To do this, shirts are bleached, starched and carefully ironed. It is best, of course, to store shirts hanging on hangers in the closet, but sometimes this is not possible. Therefore, in order for a carefully ironed shirt to maintain its impeccable appearance, it is necessary to fold the shirt correctly.

How to fold a shirt

Folding a shirt neatly is not that difficult. You just need to know how to do it. Once you learn how to fold a shirt, you can do it very quickly. Thanks to this, any man can look neat and beautiful. If you fold the shirt correctly, then you can simply store them in the closet on a shelf (you can do without hangers), and also, if necessary, quickly and neatly pack them in a suitcase.

So, let's talk about how to fold a shirt so that it doesn't lose its appearance. In this case, the main thing is that after ironing, wrinkles do not form on it, and that, if necessary, it can be dressed without additional ironing. This is especially necessary when, for example, you need to change clothes on a train, in a car or on an airplane, and sometimes even in a hotel, when ironing a wrinkled shirt is not possible or there is no iron at hand.

So, before folding the shirt, you need to iron it and let it cool. Then, we fasten all the buttons on the shirt, after which we turn it upside down and bend the sides of the shirt at the same distance from the sides. Then we level the sleeves over the folded side parts, gently smoothing them with your hand until there are no wrinkles on them. The result should be a narrow, even rectangle. After this, straighten the bottom of the shirt and carefully bend it away from you towards the collar. Then, we turn the folded shirt over, and additionally straighten the resulting folds again and place it on a shelf in the closet or in a suitcase. If something is not clear, look at the picture, which explains step by step how to fold a shirt.

This fairly simple method allows you to keep your shirt in good ironed condition without additional ironing. In addition, you can fold the shirt a little differently by changing the sequence of actions. Turning the shirt back up, fold the sleeves up. After this, mentally divide the back of the shirt in half and bend the sides to this line. We bend the resulting rectangle in half horizontally. As you can see, folding shirts is not difficult! Now you know it too!

Traditionally, after ironing, the shirts are hung in the closet on hangers. However, when the need arises to get ready for a trip, the question arises of how to fold a shirt. After all, you don’t want to undo your work and, upon arriving at the place, take out a crumpled item.

Our advice from step by step instructions will become a visual aid for you.

Fold the long sleeve model

Everyone should know how to fold a long-sleeve shirt correctly, because it is a popular wardrobe item for both men and women. They are worn not only to business meetings, to the office, but also to romantic dates, to a restaurant or theater.

So, let's start the process.

Fasten all buttons on the product. This will align it and make it symmetrical.
Place the item on a flat surface with the front side facing up.
Run your hands lightly and smooth to remove wrinkles and creases.
We start folding from the left side. We need to fold the first third of the shirt; to do this, we take hold of the middle of the shoulder and evenly lower our gaze down the product and grab it at the lowest point with the second hand. We bend along the line to the back.
After the previous step, the sleeve lay diagonally. You shouldn’t leave it like that, because... he will be very wrinkled. We will bend it parallel to the sidewall.
We do the same on the second side. Now the sleeves lie side by side and evenly.
We got a figure that looks like a rectangle. The bottom edge must be turned 10 centimeters inward.
Fold the product in half so that the collar and bottom edge are on the same level.

Ready! Now your item can go to the closet on a shelf or to a suitcase.

Try another method

The initial stage is similar to the previous one: fasten all the buttons and level the product on a smooth surface.
We bend one side to the center of the product. We fold the sleeve three times. Be careful not to catch the cuffs.
We fold the other part in the same way towards the center, covering the first layer by literally a few centimeters. Once again we go over the thing with our hands, removing any irregularities.
Bend the lower part by 10 cm and fold it in half, covering the sleeve. If you strictly followed the instructions, then now your sleeve edge is exactly at the level of the fold.

You are probably reading this now, and your hair is standing on end from the complexity of the actions described. But in reality it all looks very simple. After a few repetitions, you will become an ace in this matter and can teach others how to fold a shirt correctly.

If the sleeve is short

Such models are also called Swedish. They are relevant in summer period, when moving happens even more often.

There should be no problems at all with a lightweight model. Here everything is done as described in the instructions above, only the moment with the sleeves is omitted. Often these products are also made from wrinkle-resistant fabrics, so there’s definitely no need to worry.

How to fold neatly into a suitcase

A business trip is coming up, and it seems like you don’t need a lot of things, but it’s worth bringing a couple of shirts. Firstly, you are unlikely to do laundry there, but it’s more pleasant to walk around in fresh clothes. Secondly, suddenly plant a stain. Thirdly, why not show off in front of your partners.

So, how to carefully compact your wealth into travel bag. For some reason, previously it was customary to lay everything on top of each other, but things still turned out crumpled. Modern travelers recommend rolling the item into a roll.

Fasten all the buttons again. Fold the sleeves over shoulder seam and roll the product into a loose small roll. Do not turn the collar under any circumstances, otherwise it may become deformed. It remains untouched.

This the method will work for hard-sided luggage. In other situations, use special travel packages.

Preparatory work

If the item has been properly washed, dried and ironed, it will survive the folding process painlessly. Pay attention to our tips that will tell you how to fold a shirt so that it doesn't wrinkle.

Iron the shirt thoroughly using the steam mode. After letting it cool, spread it on ironing board or hang on hangers until completely cool.
Did you notice when purchasing that they put inside the shirts? hard cardboard rectangular shape? Use this idea in your home. Just put it on back wall products before starting folding.
It is best to transport delicate items in special containers. If you don’t have this on hand, wrap everything carefully in a bag or parchment paper. This way you can keep the appearance unstained.
If you are used to stacking shirts in your closet rather than hanging them on hangers, please do not put heavy sweaters and trousers on top. Give them a separate place in your chest of drawers.

Another life hack: to make the item look perfect, before putting it on, let it hang in the bathroom with hot water on for 15 minutes. This method is an alternative to steaming, which is most likely impossible in a hotel environment.

A briefcase is a bag for transporting blouses. Pay attention to it if traveling is your lifestyle.

Bottom line

Now you know how to fold a shirt and you can do it without problems in a couple of minutes. As you can see, the actions are completely simple and accessible to both men and women. What if you teach this to a child?

Just imagine, your schoolchild is organizing everything in the closet with his own hands! Well, isn't it a dream?

To do this, it’s worth getting him interested in the process: ask him to remember his geometry lesson and walk along the straight fold lines on the shirts, wrapping everything according to the instructions. During the game, any learning becomes easier.

Don't ignore the preparation tips, then your appearance will always be impeccable. Psychologists say that when we like ourselves in the mirror, this increases our self-esteem, and therefore our confidence in ourselves and our own successes.